Storage

REACTIVATING THE BOAT AFTER STORAGE

After removing your boat from storage, complete the following operations prior to hitting the water: • Check the expiration dates on safety gear such as flares and fire extinguishers. • Check all lights on the boat and trailer. • Make sure your boat insurance policy is up-to-date. • Check the gear lube in the engine lower unit and make sure no water is present. If it is, contact or dealer before starting the motor. • Grease all zerk fittings in accordance with the engine owner’s manual. • Check the fuel system including tank, fittings, fuel lines and hoses for leaks. • Connect the batteries and check all electrical connections. • Inspect the steering system linkage and make sure the steering wheel turns freely. • Inspect all livewell, baitwell, bilge pump and thru hull fittings and hoses. • Backflush all hoses to remove any accumulated debris. • If you notice any problems, see Section 9 - Troubleshooting or contact your

Alumacraft dealer before using your boat.