Marine Wiring Color Code

Fuel gauge sticks during 1.Slightly loosen nuts holding back clamp and operation or is inoperative. check operation. Make sure gauge now operates properly and is not loose in panel. 2.Make sure battery is properly connected and ignition switch is on. 3.Check ground connection. 4.Contact your Alumacraft dealer.

PLUMBING

Pump runs but fails to 1.Make sure applicable valves are open. function. 2.Remove pump filter screen and inspect for clogs. Remove clogs and restart pump. Make sure pump impeller works and re-assemble unit. 3.Check input and output hoses for blockage and remove any clogs. 4.Contact your Alumacraft dealer.

RED Main power feed, 2Vpositive

BLACK PURPLE

Common ground, 12Vnegative Ignition keyed power feed GRAY Fuse to stern light, tach sender GRAY/WHITE Fuse to bow light BROWN Fuse to bilge pump BROWN/WHITE Fuse to aerator pump BLUE Interior courtesy lights GREEN Fuel system bond wire YELLOW/RED Starting circuit PINK Fuel sender to gauge BROWN/RED Recirculating pump BROWN/BLUE Recirculating pump ORANGE/WHITE Horn ORANGE Accessory PURPLE/RED Radio