July 2016 Advertiser by Component Manufacturing Advertiser

A #

204

The

July 1st 2016 #09204

Component Manufacturing dverti$er

Serving the Structural Building Components Industry

Photo courtesy of: Structural Wood Corporation | St. Paul, MN EWP & Timber Components | 50 Years

BUILDERS COUNT ON YOU FOR A NUMBER OF REASONS. GIVE THEM 4,000 MORE. 1 of 4,000+ USP CONNECTOR PRODUCTS TO MATCH EACH FRAMING PROJECT.

OFFER THE COMPLETE PACKAGE Deliver even more value with every truss order by adding the code-approved USP® Structural Connectors they need. This is the perfect opportunity to build your relationship with the customer and increase your bottom line on every job. Contact your MiTek sales manager to learn more. Download the complete catalog

USPConnectors.com/catalog.

Page 2

Component Manufacturing Advertiser

July 1st, 2016

M ACdverti$er

Th e

omponent

anufacturing

You Saw it in the

Inside

Published Monthly Publisher

New & Used Equipment .....................................................7 Saws ...................................................20 Truss Equipment ...................................................30 Panel Equipment ...................................................36 Trucks & Trailers ...................................................36 Misc. Equipment Door and Stair Equipment ..................................................43 ...................................................44 Parts House ...................................................44 Plates & Hardware ...................................................45 Lumber Market ...................................................50 The JobLine Hiring Zone ...................................................51 Available Jobs ...................................................54 Available Candidates ...................................................57 Calendar of Events ...................................................64 News & Announcements

Thomas McAnally twm@componentadvertiser.org

Editor

Anna L. Stamm 800-289-5627 x 3 anna@componentadvertiser.org

Distributed FREE Via e-mail subscription Download PDF or Read on line at www.componentadvertiser.com News of Interest and Advertising inquiries can be submitted to: anna@componentadvertiser.org An Open Forum for many sources. Deadline is the 25th of each month. (20th for new Advertisers)

Articles .....................................................4 Question of the Day ...................................................10 Advertiser Forum ...................................................16 Carl Schoening - Eagle Metal Todd Drummond Consulting, LLC .................................................20 ...................................................24 Joe Kannapell - MiTek ...................................................27 Glenn Traylor ...................................................42 Robert Glowinski - AWC ...................................................46 Matt Layman - LLG Safety First Topics in English/Spanish ...........................................56 ...................................................59 Frank Woeste, P.E. PhD. Ben Hershey - 4Ward Consulting ...................................................62 ...................................................63 Design of the Day ...................................................65 MiTek - The Last Word

Articles, Trade Names, and Logos are the property of their respective owner or creator unless otherwise noted Disclaimer: We reserve the right to refuse any advertisement or material that we deem not in the interest of the industry or the Advertiser. The Advertiser is provided “As Is” including typographical errors, omissions, and mistakes both intentional and unintentional. Believe it at your own risk! Copyright 2008-2009-2010 -2011-20122013-2014-2015-2016

Advertiser Directory

Component Manufacturing Advertiser The Advertiser a division of

JobLine, Inc.

the

Adverti$er

Don’t Forget!

July 1st, 2016 #09204 Page #3

610 Briar Way Ln St. Johns, FL. 32259

no reproduction in whole or in part without permission from the component advertiser eMagazine Reading options You have two options with the Advertiser, 1 or 2 page display. For smaller screens, tablets and phones, we offer a 1 page link in the weekly notice. If you open this in two page, you can easily change to one page by clicking on the control Icon. Don’t forget the PDF download option on our website.

Acceptance Leasing & Financing ...................................................36 ..............................................16,17 Eagle Metal Products ..............................................19,27 Eide ..............................................20,37 Fitzgerald Group ......................................2,24,65,66 MiTek | USP ..............................................33,35 Panels Plus .......................................4,5,8,9,64 Simpson Strong-Tie ......................................6,12,22,25 Square 1 ..............................................37,39 The Hain Company Todd Drummond Consulting, LLC ...........................................20,21 ...................................................32 Triad | Merrick Machine ..............................................38,45 Vaagen Brothers Lumber .....7,13,26,29,30,31,34,39,40,41,44 Wasserman & Associates ...7,11,13,14,15,18,20,23,26,28,29,34,40 Wood Truss Systems

Archive Copies Available On Line www.componentadvertiser.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

July 1st, 2016 #09204 Page #4

Adverti$er

Don’t Forget! You Saw it in the

Question of the Day... Can organizational self-assessment and critical reflection help my business? Stan Sias

Following-up on last month’s article, which garnered more comments than usual, I think that we should take a bit deeper dive into metal plate connected wood truss permanent bracing from “the field’s” perspective, and what the CM might do to assist. Permanent Bracing is the final critical design assumption that must be met in order for the trusses to perform as designed and sealed. The best design and in-plant QC process in the world is useless unless these final touches are properly detailed and executed on the job. Mark Chubb, Chief Resilience Officer & Chief Strategist, ManitouNW, in his recent NFPA blog posting “It Takes Intelligence” comments: “Many professions rely on self-assessment and critical reflection to encourage growth and development. Others see it as a tool for gathering organizational intelligence and feedback on performance. Even the fire service depends on self-assessment to improve reliability, most notably in the accreditation process, but also in ordinary debriefs and hot-washes following incidents. Self-assessment is a critical component of every continuous improvement program.” Many Component Manufacturers (CMs) and Building Designers (BDs) could benefit from similar intelligence gathering and critical assessment. I do not believe that we can, or should, leave the policing of correct wood truss permanent bracing installation up to the code officials or inspection agencies. As stated last month, many framers claim to have never witnessed a truss web and/or chord bowing due to excessive compression. In and of itself, that may or may not be true. I’m quite sure that they all have witnessed a time or two when they needed to remove temporary lateral restraints to beat the truss over to its appropriate on-center spacing when applying the top chord permanent bracing known as sheathing. What about when the compression member isn’t quite as obvious as in interior bearing or under/over-framing situations (piggyback trusses and diagonal webs to bearings are good examples, see below).

Lateral restraint and diagonal bracing truss on base of piggyback set (From BCSI 2015 Figure B2-52).

Because of the interior bearing, the webs need lateral restraints attached even though (in this case) they have been bumped up in size to 2x6.

This web kicker to bearing is also requiring a lateral restraint.

In the case of the piggyback set above, the need for lateral restraints on the flat top chord section of the base truss may not be as obvious on the Truss Design Drawing as the other two examples where the restraint is indicated. In some cases the installer, Building Designer and Code Official would need to look at the Bracing Summary to see the options and maximum on-center spacing of the restraints (see next page).

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

Adverti$er

Don’t Forget! You Saw it in the

July 1st, 2016 #09204 Page #5

Bracing Summary TC Bracing: Sheathed or Purlins at 3-9-0, Purlin design by Others BC Bracing: Sheathed or Purlins at 10-0-0, Purlin design by Others

In the case shown above, the top chord of the base truss would need to have lateral restraints (and their associated diagonal bracing) at a maximum of 3’-9” on-center along its entire length. How was the framer supposed to know about this at the bid stage? There are times when wood truss permanent chord and/or web member restraint and bracing is unavoidable and even desirable. Take the piggyback application shown above. The fire service would much prefer the proper installation of lateral restraints and diagonal bracing to the flat top chord section of the base truss in lieu of sheathing so as to not create a cockloft (hidden space) that would prevent reaching a fire with a hose stream. Valley truss over-framing is a similar scenario. There are many other times though that permanent lateral restraints (and their associated diagonal bracing sets) can be eliminated by simply upsizing or up-grading the truss member itself, or flipping the web so that it is in tension in the truss rather than in compression (see examples below).

Compression web with lateral Web in tension and no additional Compression web with lateral Compression web up-sized to restraint added. lateral restraint required. restraint added. eliminate the lateral restraint. Yes, this may take the CMs Truss Technician or optimizer a few extra minutes (and time is money), but don’t you think that the framer would be appreciative? What about the Building Designer, he/she knows that you are looking out for them as well when there is not the additional required bracing for them to design and inspect. This sure seems like a win-win for the framer and the BD, but how does the CM get paid for this time and expertise? [Thanks for staying with me this long for we have just reached this month’s Question of the Day!] Can organizational self assessment and critical reflection really help my business? I say yes! Taking Chubb’s advice, “Many professions rely on self-assessment and critical reflection to encourage growth and development,” I advise CMs to look within for ways to set themselves apart from their competition by going the extra mile for their customers, both direct and indirect. How do you become both the framer’s and the Building Designer’s best and most trusted supplier? Chubb goes on to state, “Well-designed selfassessments are powerful tools for reflection and action.” One of the best ‘actions’ I have found is to be willing to alter your schedule. Be willing to work and collaborate with the Building Designer up front (and provide them with the work you are going to do anyway) in exchange for a no-break specification in the Construction Documents. This way, all of the truss designing can be completed ahead of time and the BD can create a truss bracing plan for the framers to bid and work from. I fully understand that this is a break from the deferred submittals that has become the industry norm, but that norm has very little respect for the framers who must guess how much material and labor they will need to supply for permanent truss bracing or for the Building Designer who must oversee the construction and assure compliance with the plans, specs and truss bracing! Is it any wonder that the framer has no interest in putting in anything more that what is necessary for them to safely erect the building? Are you doing everything that you can to minimize the restraints and therefore the material and labor necessary to install them? Are your Sales folks out there actively selling that concept to your customers? Have you, or your management, reached out to your architects, engineers and specifying community (your indirect customers) with the offer to assist them up front and take the guess-work out of truss permanent bracing? As Chubb states above, “Self-assessment is a critical component of every continuous improvement program.” Simply changing the schedule in which you fulfil your role in the application of wood trusses in the construction process could have a profound effect on the built environment. To help, the Truss Plate Institute is currently developing ANSI/TPI 3, a new American National Standard to assist the Building Designers with designing and optimizing wood truss temporary and permanent bracing. TPI 3, the Design of Bracing for Metal Plate Connected Wood Trusses, is in the latter stages of consensus committee development and looks to publish late this year or early next. With this new Standard, implementation guidance from BCSI and your help as CMs, the work of the framer will become more profitable, the work of the BD and inspector will become easier and you will have a whole slew of newly acquired friends in the building industry. Best yet, we’ll be another step closer to having buildings constructed where all design assumptions are met and the structure’s resiliency and durability are far improved. Thanks for reading, S. PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

1-866-647-7771 Sales@Sq-1Design.com "Passionate About Our Work and Dedicated to Our Service"

M ACdverti$er

Th e

omponent

anufacturing

July 1st, 2016 #09204 Page #7

Adverti$er

Don’t Forget! You Saw it in the SAWS

NEW! 2004 Koskovich Omni Miser RT inear saw with roof truss cutting software, L servo controlled angulation axis of movement, includes crooked lumber sensor, print system A (one face), rebuilt Auto Deck in 2010 to accommodate up to 20’ stock, 2x3 through 2x12 material), automated lumber advance (LASM), auto exit roller, belt-style waste conveyor, 5 HP 3450 RPM arbor motor, computer monitor (Windows XP Service Pack Three) with OEM console. Includes (7) spare blades, miscellaneous spare boards, cables, air cylinder, belts, and all available system spares. 120/240v Single Ph. And 208/480v, 3 Phase power, 90 PSI air required. Well maintained throughout its service life, currently in daily operation. Price: NOW $39,450 Location: MB Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2005 Razer v4 Linear Saw Six-Axis CNC Linear saw – Currently in operation and consistently upgraded this saw features a 6000 RPM hydraulic saw motor, full axis of motion to complete straight, single/compound bevel and rip cuts with a 13 3/4” blade. Handles material up to 20’ long, 14” wide and 4” depth. OEM supplied in-feed deck and outfeed conveyor with kick-off table are included. Right to Left hand feed configuration. Includes spare blade, encoder, (2) encoder wheels, sensor cables, and all available spare parts. Includes Windows XP Service Pack two software and transformer for 230 or 600v to system specific 415v, 3Ph, Minimum 100 psi air required. (Ink jet printer shown in pictures is not included.) $49,500 FOB MB Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

New Spida Vector Saw with Mango Plate Marker (FOB IN) $44,975 800-382-0329 | www.wasserman-associates.com

Wood Truss Wood Truss Systems Systems

manufacturers’ Clary Shortcutter II Model 329 web saw with single sided setup, four blades, includes drag chain waste conveyor with tall incline. Minimum angle approximately 10 degrees, maximum angle 135 degrees. Minimum length cut is 9 inches (90/90), 18 inch 4-angle, and longest length cut is 18 feet. $8,490, FOB IN Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2000 Alpine AutoMill RS Component Saw Alpine AutoMill RS model 344, five-blade, computerized component saw. From the OEM literature: sets up in 2 to 19 seconds, using a touch screen for ease of operation. Five-head automated component saw works in semi-automated control via touchscreen input. It has 19 axes of automated movement, diagnostics, auto management reporting. The RS cuts from 13" to 20' long material in size range from 2x3 through 2x12, and includes [3] 18", [1] 20" and [1] 32" blades with air brakes, pc with swingarm cabinet and scrap conveyor under saw. 480v/60Hz/3Ph power. $31,249, FOB: QC Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2003 Omni Miser Saw Automated Wood Processing System. Lengths to 16’. Ink Jet Print System A (One Face). Incline Live Deck. Bunk Feeder. (5) Th e 2x4 Magazines. Installation & Training omponent anufacturing is available at additional cost. $67,500 NOW $44,500 FOB MN Serving the Structural Building Components Industry Wasserman & Associates 800-382-0329 www.wasserman-associates.com

C M dverti$er

PHONE: 800-289-5627

Representatives

NEW!

Monet FWA 500 Floor Web Saw

New, Monet five-head, floor truss web saw, cuts 4-angle, 4x2 floor truss webs from 16 inches and 90-90 blocks from 12 inches to four foot long maximum length. Features 10-board magazine feed, powered, fixed-quadrant angulation, manual carriage standard, shaker-pan scrap conveyor with short incline conveyor and cut-off blade. Option for longer carriage length, single sided setup (shown in pictures, but not standard), dust hood and choice of shaker or belt scrap conveyor. 440 volt, 3 phase. $49,000 Base, FOB MO.

765-751-9990

Read/Subscribe online at www.componentadvertiser.com

www.woodtrusssystems.com FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

Adverti$er

Don’t Forget! You Saw it in the

advertiser

July 1st, 2016 #09204 Page #10

Forum

Giving Back One Day at a Time Anna L. Stamm Director of Communications and Marketing Component Manufacturing Advertiser.

We all know about the grand projects undertaken in our industry to support worthy causes and help others in need. We’re proud to report on these terrific causes and thank the chapters, companies, and individuals who contribute time, materials, and cash. But the big projects aren’t the only ones that occur on a daily basis. There are many folks in our industry family who make a difference every day.

From One Family to Another Folks in Florida will remember Mike Nilles for, among other things, being the President of the Southwest Florida Truss Manufacturers Association. Off the top of my head, I don’t recall how many years Mike was Chapter President, but I know it was a few. Though I’ll always think of Mike as a component manufacturer, that’s not his primary job anymore. In fact, over at Nilles Design Group in Cape Coral, FL, he’s not known by the community for his trusses. Instead, his family in known for the help they give to Builders Care.

Helping Others in Southwest Florida A grateful recipient of a wheelchair ramp

Southwest Florida is not unique in its desire to help others and give back to the community, but it has certainly found a great way to do so. The local home builders association has organized a nonprofit that does what homebuilders do best – provide construction services from qualified professionals. To quote them: Builders Care is the nonprofit charitable arm of the Lee Building Industry Association (BIA). Its objective is to provide emergency repairs and construction services to elderly, disabled, and economically disadvantaged people who are unable to obtain home repairs through traditional means. To date, Lee BIA Builders Care has put nearly $4 Million in construction services back into the community at no cost to homeowners in need. Builders Care enlists the volunteer services of Lee BIA members and leverages grants and donated materials to provide construction and remodeling services to qualified homeowners throughout Lee County.

One Wheelchair Ramp at a Time As Christi Pritchett Sarlo, Executive Director of Lee BIA Builders Care told me, “Mike Nilles, his son, and their staff help with each and every wheelchair ramp project that we complete.” While that’s not the first thing that comes to mind when considering custom residential designers, it’s certainly worth noting. Sometimes your most important project isn’t the one that generates the most revenue or accolades. Sometimes the project that you’ll remember the most is the project that has the greatest impact for the person who will be able to benefit from your hard work. That’s the kind of project that puts a smile on your face . . . and on someone else’s face too. PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

Adverti$er

Don’t Forget! You Saw it in the SAWS

Wood Truss Systems

manufacturers’

Koskovich Auto Omni Component Saw This 4-blade saw h as been well maintained, and consistently upgraded throughout its service history, includes belt-style waste conveyor with side pans, digital inclinometers, spare set of blades, spare transport side motor, 1 KB card for out feed rollers, several spare circuit boards, and all other available spare parts. PC runs Windows 7 OS, current Omni Software from OEM. 220v, 3 phase e lectrical. 10,850 FOB MB Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2003 Spida Saw Only Direct Drive 5.5 HP Motor with 18” Blade (460 Volt). Minimum Angle of 10 Degrees with 24” Stroke for Long Scarf Cuts. Adjustable Stroke Limiter, Plexiglass Shield & Laser Pointer for Operator Safety. Dust Extraction Outlet •Has Angulation Motor (for upgrade to automated saw). Excludes Spida Computer & Enclosure for Saw/Stop Automation. Excludes Tiger Stop, Infeed/Outfeed Roller Conveyors & Dust Collector. Add $5,900 for 2003 TigerStop (TS16) with 30’ of Roller Conveyor. $9,900, FOB WI Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Idaco Super Compon-a-matic 4 blade "super" Compon-a-matic saw with power angulation, carriage, and air brakes. Shortest cut 12", longest cut 20 ft. @ 90/90. Includes waste conveyor with short incline. 460V, 3 phase power. $8,490 FOB NY Wood Truss Systems 765-751-9990 www.woodtrusssystems.com PHONE: 800-289-5627

1994 MiTek Combi-Cut 4-Blade Saw 1994 MiTek Combi-Cut component saw, model 2000 Combi Cut, serial # CO15, four-head saw with powered angulation, Cuts from 1 foot at 90/90 to 20 foot lengths, angles from 10 to 105 degrees, digital angle readouts, power angulation, power length. Cuts 4x2, four-angle floor webs from 19". Includes under-saw waste conveyor (no incline), two extra 16" blades, manual and all available parts. Saw in use until end of January, 2016. 480 volt, 3 phase. $15,990 NOW $13,890 FOB MI Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

July 1st, 2016 #09204 Page #11

Representatives

NEW!

New Hundegger Turbo Saw The Hundegger Turbo-Drive saw is a fast, accurate and versatile, fully automated linear saw specifically designed to cut structural component parts. Hundegger continues to stretch the cutting capabilities of our industry by providing a single saw with options that can perform basic drilling, milling and printing operations in addition to 5-axis cutting.

$208,963 Nicely Equipped FOB Germany/UT 765-751-9990 www.woodtrusssystems.com

2004 TCT Model 1100 Linear Saw Cut 2x4 and 2x6 Lumber from 3” to 20’. Tops, Bottoms, Webs, Sliders, Wedges and Scissor Bottoms. 230 Volt / 3 Phase 5 HP Motor with 24” Blade. Ink Jet Printer. Scrap Conveyor. $36,900 NOW $30,000 FOB AR. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

1997 ASI B500 Component Saw 1997 ASI B500, 5-blade component saw, features semi-automatic user interface with backup mechanical indicators, grouped functions such as automatic blade alignment for chords or webs, automatic centerline adjustment of nominal board size, safety fencing, shaker pan scrap system, digital read outs and push-button adjustment controls. 480 volt, 3 phase. $19,890 NOW $9,980 FOB ON Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Wood Truss Systems

manufacturers’

Representatives

New Spida Automated Apollo Saw The Spida Apollo saw with Automation is a computerized, pull-arm type saw used for cutting either wood truss components or wall panel cutting and represents the lowestcost way to add an automated single-blade saw to your operation. Features include angle cutting from 10 to 170 degrees, 36 inch scarf cuts, patented variable stroke limiter for safety, solid frame and arm design, 17 inch industrial touch screen with enclosure, 7.5 HP motor, plug and play wiring making installations easier and includes cowls for adding a dust extraction system.

$48,680 - FOB NZE/IN 765-751-9990 www.woodtrusssystems.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

July 1st, 2016 #09204 Page #13

Adverti$er

Don’t Forget! You Saw it in the SAWS

Wood Truss Systems

manufacturers’

Used Hain Quick Rafter Cutter Checked and Repaired by Leonard Hain. Board Sizes: 2x4 and 2x6. Motors: Two 2 HP / 220 Volt or 440 Volt / 3 Phase. Saw Blades: 7 1/4” Carbide Tipped (set at 45 degrees). Angle Adjustment: Manual Rotation with Air Brake. Air Supply: 90 PSI. Carriage: Steel Rails with Steel Dual V Rollers. Pedestal: 3/16” Formed Steel with Powder Coat Finish. Saw Housing: 1/2” Billet Aluminum. Covers: 10 Gauge (1/8” thick) Steel with Powder Coat Finish. Fully Enclosed for Safety $6,950 FOB CA. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Northfield Model 410 Upcut Saw Northfield model 410 upcut saw. Semiautomatic air actuated under table cutoff saw with 18 inch diameter blade, safety guard cowling for blade, 10 HP arbor motor. Cuts from 2 x 14' to 4 x 10". Push button controls. 230/460 volt, 3 phase electrical. $4,890 FOB OH Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Mid-90's ASI/Monet DeSauw B500 Component Saw Push Button Controlled Movements with Digital Readouts Backup Mechanical Counters & Scales (1) 30” & (4) 16” Saw Blades cut from 18” to 20’ Lumber Hold Downs Vibrating Waste Conveyor (under saw) Incline Waste Conveyor (adjacent to saw) $22,900 FOB IL. Wasserman & Associates 800-382-0329 www.wasserman-associates.com PHONE: 800-289-5627

2008 Alpine X4 Linear Saw •Touch Screen Control Panel •5 Axes of Automation •15 HP Motor with 22” Blade •Ink Jet Printer •Auto Feeder (Live Deck) •Outfeed Conveyor •230 Volt / 3 Phase $49,900 FOB AB NOW $39,900 Wasserman & Associates 800-382-0329 www.wasserman-associates.com

1998 Koskovich Auto Omni Component Saw This saw has been well maintained, and consistently upgraded throughout its service history, includes belt-style waste conveyor with side pans, digital inclinometers, spare set of blades, spare transport side motor, 1 KB card for out feed rollers, several spare circuit boards, and all other available spare parts. PC runs Windows 7 OS, current Omni Software from OEM. 220v, 3 phase electrical. $17,990 NOW $10,850 FOB MB Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Representatives

New Hundegger Turbo Saw $208,963 Nicely Equipped The Hundegger Turbo-Drive saw is a fast, accurate and versatile, fully automated linear saw specifically designed to cut structural component parts. Hundegger continues to stretch the cutting capabilities of our industry by providing a single saw with options that can perform basic drilling, milling and printing operations in addition to 5-axis cutting. The Turbo-Drive's features and benefits include: up to 4-board lumber stacking, capable of cutting lumber, wood I-beams or engineered lumber, capable of cutting stair stringers, able to scarf or valley cut along the horizontal plane,option for two different types of millwork attachments: can mill recesses or profiles on single or stacked boards, options for inkjet, pen or label marking, option for bar coding, data transfer from design software to the saw, free software upgrades and the use of Board Stretcher technology: boards are cut faster with less blade movements and less waste.

765-751-9990

NEW!

www.woodtrusssystems.com

$48,600 FOB IN

1996 Auto-Omni 5 Blade Automated Apollo Saw with Truss Software Automated Component Saw Solid 48” x 72” Frame and Arm Construction Minimizes Flex on the Saw Frame. Direct •Automated Setup as directed by Truss Drive 7.5 HP Motor with 18” Blade (230/460 Volt). Minimum Angle of 10 Degrees Design Software Output with 36” Stroke for Long Scarf Cuts. Automated 160 Degree Angular Movement. •Computer, Enclosure & Stand Variable Stroke Limiter & Plexiglass Shield for Operator Safety. MDF Profiled Saw •5 Blades cut 2x3 through 2x12 and 4x2 Bench Top Provides a Safe Working Platform. Dust Extraction Outlet. 20’ of MDF from 11” to 20’ Bench Top with Automated 20’ Length Stop & 10’ Gravity Conveyor. Workstation, •Ink Jet Printer Control Cabinet Enclosure & 17” Touch Screen Integration. Serial Control System. •Shaker Pan Waste Conveyor (under saw) Includes all Plug & Play Wiring. MangoTech/Spida Truss Cutting Software. Add •Incline Waste Conveyor (adjacent to saw) $3,680 Two Day Onsite Installation & Training. Add $750 for 12 Month Phone & •Installation Available (quote upon reVirtual Tech Support. Add $275 for Spare Blade. Add $558 for Saw Laser Guide. Add quest) FOB WI $890 for Dust Collector Wasserman & Associates 800-382-0329 www.wasserman-associates.com Read/Subscribe online at www.componentadvertiser.com FAX: 800-524-4982

800-382-0329 | www.wasserman-associates.com

MORE THAN JUST A PRETTY FACE.

THE HUNDEGGER TURBO DRIVE SAW IS A FAST, ACCURATE AND VERSATILE, FULLY AUTOMATED LINEAR SAW SPECIFICALLY DESIGNED TO CUT STRUCTURAL COMPONENT PARTS.

Hundegger continues to stretch the cutting capabilities of our industry by providing a single saw with options that can perform basic drilling, milling and printing operations in addition to 4 -axis cutting.

Hardly another “pretty face”, the TURBO Drive is a solid evolution of the popular SC Series saws. This workhorse, like all of Hundegger’s production saws, benefits from their experience learned from a wide variety of wood cutting and milling applications from over 4,700 saws to date. Specific to our wood component industry, the TURBO Drive has been thoroughly developed for world-wide customers prior to its introduction to the US. Regardless of your cutting application, be it I-Joist, dimensional 2x lumber, or any variety of EWP, we have the experience and equipment to efficiently bring your job to market.

ÜÜÜ°7 `/ÀÕÃÃ-ÞÃÌi Ã°V ÊUÊÇÈx Çx£ ä

More than history, the TURBO Drive is German engineered to allow for maximum performance in a given application. With this base, precision performance is improved with software optimization rather than hardware changes. This is apparent when the TURBO Drive was optimized for USA component cutting, the same world model saw runs significantly faster, simply by optimizing movements and stroke. For a demonstration of how software upgrades accomplish this, see the “before & after” video at: https://youtu.be/3V5gmXbjQPU. It illustrates that software can increase throughput rather than redesigning elements of the equipment, your TURBO Drive does not become yesterday’s news because of a model number change.

FOR A DEMONSTRATION OF HOW SOFTWARE UPGRADES ACCOMPLISH THIS, SEE THE “BEFORE & AFTER” VIDEO AT: https://youtu.be/3V5gmXbjQPU

So how much would you pay for software that increases your cutting productivity and keeps your saw current with the latest technology? How about zero? With the Hundegger TURBO Drive, free software updates for life are included with the saw. As software is optimized and performance is enhanced, you’ll never have to worry about what model you bought. For more information, visit http://www.woodtrusssystems.com/ manufacturers/general/hundegger-usa/

ÜÜÜ°7 `/ÀÕÃÃ-ÞÃÌi Ã°V ÊUÊÇÈx Çx£ ä

M ACdverti$er

Th e

omponent

anufacturing

July 1st, 2016 #09204 Page #16

Adverti$er

Don’t Forget! You Saw it in the

Smart Guys

This month I wanted to stop down again and talk about some of the great individuals who have worked in this industry. It wasn’t my idea….well, not completely. After a few of the articles I penned about some of the guys that haven’t received due recognition, I started getting a lot of suggestions about more leaders who I should take time to recognize. So, here we go. I am going to start by showing this guy’s official bio and then talk about him. Frank Woeste, P.E., Ph.D. is Professor Emeritus and Adjunct Professor of Sustainable Biomaterials. Frank conducted wood engineering research and taught wood design courses throughout his 26-year tenure at Virginia Tech. Since 1977, Frank has conducted research with several departmental faculty and graduate students interested in the engineering design of wood components and structures. From 1994 through 2007, he served on project committees responsible for the revisions of the ANSI/ TPI 1 wood truss design standard. He also serves on the AF&PA/ AWC Wood Design Standards Committee responsible for revisions to the National Design Specification for Wood Construction and the Wood Frame Construction Manual. He continues to offer continuing education programs for structural engineers and others involved in the design, construction, and inspection of wood buildings. Whew! That is a lot right there. I have known Frank for a very long time and known of him even longer. Frank and I were both on the ANSI/ TPI 1 committee for a few years back in the early 2000s. And, before anyone gets the wrong idea, Frank and I have disagreed on issues and had discussions in which we could not sway each other to the other’s point of view. We didn’t get mad at each other. We remained friends and continued to work for the betterment of the component industry. That is Frank. He is a brilliant man and a passionate man. He will not be moved by suggestion. If you are going to change Frank’s mind on something you must have irrefutable evidence. I like that! I like a guy who is going to examine the evidence and base his position on engineering. Frank is the kind of guy who, if someone challenged him on something, he would test it. This guy has probably done more testing than anyone in the industry. He has answers to questions that haven’t even been asked yet…lol. Anyone who thinks Frank is just some Brainiac that doesn’t know how to have fun is wrong. He is one of my favorite people with whom to have a cocktail and a discussion. But, if you ask a question, be prepared. There are no short answers with Frank. It could be about anything. The depth of his knowledge in so many areas is astounding. He is what we used to call a “EWP”. Most people see those letters and think engineered wood products, but to me it is an Engineer With Personality. Attending that class was really awesome. You could tell by the others who attended that Frank is a very highly regarded resource in this industry. Many of us became friends and still remain so after all these years. Many of those attendees have become highly regarded as well. Terrific engineers who have helped this industry grow and become what it is today. Frank has a way of bringing out the best in people by challenging them to be their best. He provokes thought and analysis. Frank has been offering the truss repair course for many years and it always seems to fill up. One reason is the quality of attendees. They are generally really smart guys who are interested in sharing and receiving information. The company that Frank has kept over the years is pretty cool too. Names like Dolan, Bender, Crawford and Suddarth readily come to mind. He runs in circles that most of us will never be a party to. The published papers are too great to list and the work he has done is invaluable. Frank has my deepest respect. This next guy is probably someone most of you have never heard of, but has had an impact in our industry. Although indirect at times, he has helped me and others solve problems. Mark Crawford, P.E., S.E. is one of the really great human beings on our planet and a really bright engineer. I first met Mark in 1996 in Visalia, CA. He was the VP of Engineering at a large truss manufacturing plant. Mark is another one of those guys who will make you better by being around him and because of the way he makes you think. The other thing I really like about Mark is that he always asks questions. An engineer who asks questions can be rare, but refreshing. Most of the time when he asked me questions he already knew the answer, but it made me feel good to be included in the solution. Mark mastered the component industry (as much as anyone can master it) and caught the attention of the largest construction hardware company and was hired away. He spent a brief amount of time getting his legs under him and quickly rose to VP of Engineering there. During his time there he made his mark (no pun intended) by testing and developing many groundbreaking solutions. Many of those solutions have become standards in the industry and are now on their second or third generations and all based on the work he was doing. Even though he was busy with smart guy stuff he would stop down from time to time to help me solve a problem. He would go to the lab and witness tests and offer suggestions to maximize performance. Mark had a staff of smart young engineers CARL SCHOENING V P B U S I N E S S D E V E L O P M E N T and EITs who he mentored on a daily basis. He was preparing the next E A G L E M E TA L P R O D U C T S 12300 F O R D R OA D, S U I T E 110 | DA L L A S, T X 75234 c a r l @ e a g l e m e ta l . c o m | 9 7 2 . 3 5 0 . 9 8 0 7 PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

Continued on page 18

FAX: 800-524-4982

A-to-Z one roof the Eagle Metal advantage: every management solution, under

[ ] build it true every day SM

Manage your business your way by utilizing our comprehensive suite of products, services and solutions. It’s a strategic decision to make your production more effecient and your plant more profitable in the future. This end-to-end approach simplifies your efforts and reduces your costs. So we’re able to bring your organization’s profitability to life with maximum results.

It’s everything you need, in one place making the combination of the whole a complete integration that gives you the most bang for your buck. Call us today for a free demo and how to put Eagle Metal’s solution suite to work for your business, your way.

CONNECTOR PLATES | ENGINEERING | DESIGN SOFTWARE | SUPPORT | EQUIPMENT EagleMetal.com

800-521-3245

12300 Ford Road, Suite 110, Dallas, Texas 75234 Page 17

M ACdverti$er

Th e

omponent

anufacturing

You Saw it in the

Wood Truss Systems

manufacturers’

Adverti$er

Don’t Forget!

July 1st, 2016 #09204 Page #18

Carl Schoening article continued from page 16

generation to lead by his example. It was there that he was named one

Representatives of the “25 Most Influential Engineers in America”….I think that was

NEW!

the title…..it should have been king of all things engineering related. Mark is just that smart. Mark still resides firmly in my lifetime Top 5 Smartest Guys on the Planet…..but, we will get to that in another article. Mark did and continues to influence people, further earning that title. One of the greatest things about Mark is his loyalty and friendship. Mark and I haven’t worked together in more than a decade, but we still stay in touch. He is one of those guys who is a true pleasure to know. He is always sincerely interested in other people and what is going on in the world they travel in. Mark was the first man who I tested a new social solution on. It worked. That is a subject for another article as well. I will say here that if you have a chance to interact with Mark Crawford either on a professional or personal level, you will be better for it. Well, unless he asks you to be his workout partner at the gym. I have never been so sore in my life. That guy can really sling the iron around.

$48,680 FOB NZE/IN

Click Here for More information

765-751-9990

There you have it. My first installment of Smart Guys. I will continue this until something else (like something shiny) catches my attention. You may email me suggestions. I always enjoy the input.

JobLine.com, inc.

The

800-289-JOBS

www.woodtrusssystems.com

Wood Truss Systems

manufacturers’

Representatives

NEW! New Monet DeRobo Linear Saw New, DeRobo linear saw by Monet organizes "fill" boards to increase optimization of each board, can produce unlimited scarf cuts, cuts 1 or 2 boards at a time and cuts webs, chords, wedges, rafters and open-stair stringers. Works with all major connector plate manufacturer's software. Features include 22 inch blade, left-to-right feed direction standard, lumber push and pull grippers for more accuracy, ink marking on the 1 1/2" face of the incoming boards and small piece capture and delivery to the front of the saw for easy access. Infeed deck and bunk feed are shown as options only. Works with the optional WoodRunner TM lumber retrieval system. 440 volt, 3phase. $165,000 Base Price, FOB MO.

765-751-9990 PHONE: 800-289-5627

Time To Hire? We’re here when you need help! visit: www.thejobline.com

email: mail@thejobline.com

STRICTLY CONFIDENTIAL!

www.woodtrusssystems.com Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

New Monet FWA 500 Floor Web Saw New, Monet five-head, floor truss web saw, cuts 4-angle, 4x2 floor truss webs from 16 inches and 90-90 blocks from 12 inches to four foot long maximum length. Features 10-board magazine feed, powered, fixed-quadrant angulation, manual carriage standard, shaker-pan scrap conveyor with short incline conveyor and cut-off blade. Option for longer carriage length, single sided setup (shown in pictures, but not standard), dust hood and choice of shaker or belt scrap conveyor. 440 volt, 3 phase. $49,000 FOB MO Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Adverti$er

Don’t Forget! You Saw it in the

SAWS

2000 Alpine AutoMill RS Component Saw Alpine AutoMill RS model 344, five-blade, computerized component saw. From the OEM literature: sets up in 2 to 19 seconds, using a touch screen for ease of operation. Five-head automated component saw works in semi-automated control via touchscreen input. It has 19 axes of automated movement, diagnostics, auto management reporting. The RS cuts from 13" to 20' long material in size range from 2x3 through 2x12, and includes [3] 18", [1] 20" and [1] 32" blades with air brakes, pc with swingarm cabinet and scrap conveyor under saw. 480v/60Hz/3Ph power. $31,249 FOB QC Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

SAWS

ASI/DePauw Combi-Cut Web Saw Push Button Controlled Movements with Mechanical Counters & Scales. (4) Angulating Saw Blades plus External Cut-Off Blade cut 2x4 and 4x2 from 8” to 16’. Cut 4 Angle Floor Webs down to 12”. Powered Lumber Hold Downs. Lumber Feed Magazine. Vibrating Waste Conveyor (under saw). Incline Waste Conveyor (adjacent to saw). $24,500 FOB IL Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Speed Cut Saw with Hain Measuring System •Speed Cut Metra-Cut Saw (5 HP / 3 Phase) •20’ Hain Powered Measuring System •Cutting Depth of 6” with 16” Blade •Angular Capacity of 164 Degrees •Saw Barrier Guard •Turntable Air Brake $8,300 FOB IL Wasserman & Associates 800-382-0329 www.wasserman-associates.com

M ACdverti$er

Th e

omponent

anufacturing

Serving the Structural Building Components Industry

Reconditioned machinery never looked so good. Used & Reconditioned Machinery. Eide’s warranty on reconditioned equipment meets or exceeds the new machine warranty. Look to Eide for your Machinery, Parts and Service needs. New, state-of-the-art component manufacturing & material handling systems by the industry leading manufacturers. Installation & Operator Training included or available with any equipment purchase. Table Retrofit and upgrades for WizardPDS®. Parts & Supplies. Our parts department stocks thousands of parts and supplies for most brands of cutting and pressing systems. Custom and obsolete parts fabrication is our specialty. Service & Repair. Our service department offers complete repair, rebuilding & retro-fit services; in-house or on-site. Check out our Used & Reconditioned Equipment Listings!

MiTek Combi Set Web Saw Four Blades Cut Lengths from 2' to 16'. Waste & Incline Conveyor. Extra Set of Blades. 220/440 Volt - 3 Phase. $13,000 FOB MO. Wasserman & Associates 800-382-0329 www.wasserman-associates.com PHONE: 800-289-5627

July 1st, 2016 #09204 Page #19

Like Money in the Bank. Service you can count on!

We know machinery. Machinery ~ Supplies ~Since 1927~

Toll free 800-344-EIDE | www.eidemachinery.com 3219 North Second Street Minneapolis, MN 55411-0397

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

You Saw it in the

Representatives

n ew Table Guided Gantry System by Square 1 Manufacturing

New, table-guided (NO rail) gantry system by Square 1 Manufacturing, side-eject or end-eject options, with continuous production tables built to length. Available in steel, plastic or combination table top options. Can be fabricated to received automated jigging. New 24" diameter gantry heads feature raised operator platform, heavy-duty steel roll with 4" shaft, baffles and heavy-duty spherical bearings, dual 7.5 HP braking gear motors for a total of 15 HP, easy adjusting bogie wheel assemblies, safety bars, Wampfler "finger safe", under-table-mounted electrical supply and optional soft start drive. Square 1 Manufacturing can provide the combination of powered transfer rolls, sloping ejectors, receivers, idler conveyors and powered conveyors required to meet your configuration needs. 440 volt, 3 phase. Price: $(Based on required configuration) :: FOB IN.

Call for pricing (Based on configuration) 765-751-9990 www.woodtrusssystems.com

To uncover what’s possible, abandon what’s comfortable!

Fitzzgerald Group, LLC “A blending of excellent services and products, with answers that work”©

WoodRunner Conveyors Inc. Viking Walls MaxCustomCutter Wizzard PDS Drop-In Channels Gorbel Crane Technology Just a few or our profit enhancing parts that can make you whole!

630 Southpointe Court - #200 Colorado Springs, CO. 80906 PHONE: 800-289-5627

Adverti$er

Don’t Forget!

Wood Truss Systems

manufacturers’

July 1st, 2016 #09204 Page #20

719-528-5445 RFitzgerald@FitzGroup.com www.FitzGroup.com

Todd Drummond Consulting, LLC.

Truss Labor Time Standards for

MiTek MVPTM and Other Programs www.todd-drummond.com Phone: 603-763-8857 todd@todd-drummond.com Copyright © 2016 I have heard the same thing many times over and over. People want a better method of understanding truss manufacturing labor efficiencies, but they use the same flawed units of measurement they have always used. “Todd, I’ve been in this industry for decades as a ‘fill in the blank,’ and we have always used board foot per man-hour.” My reply: “So how does that work out for a low-board-foot project (hip roof) with many setups compared to a high-board-foot (AG trusses), low-setup project?” The response is never enlightening because BF/Man-Hour simply does not work consistently for every project. A somewhat newer trend is to use piece count, but this works only for run or assembly time, not setup time estimations. To apply an average setup time to every piece would skew the labor too high or low depending on the piece count. Piece Count Example: Setup saw time = 1 man-minute for a crew of 2 Cut rate time per 2x4x8 piece = 0.17 minute for a crew of 2 Quantity 2 = (1 setup minute) + (0.17 * 2) = 1.34 minutes total = 0.67ea. Quantity 20 = (1 setup minute) + (0.17 * 20) = 4.4 minutes total = 0.22ea. A difference of 3 times! (0.22 * 3.05 = 0.67) Some managers feel that a more consistent method is to use some form of dollars. This dollar method can take the form of material cost, sales dollars, or margin dollars, but then this, too, is flawed. If the material cost fluctuates, or if the project has a discount, does that mean the actual labor to complete the project will coincide with these changes? Of course not. So instead of banging your head against the proverbial wall, why not try something different? I had been told more than once that the MiTek MVP™ program is not very good at the labor configuration (estimating). Recently I have been able to review the labor configuration in MVP™, all I can say is, “WOW, MiTek, you did it and made a fantastic program that every MiTek customer should be using!” To everyone who has MVP™, your labor-tracking program is far more powerful and flexible than you may know. The labor-estimation configuration is marvelous and should be utilized for what it was designed to do. MVP™ can estimate the proper labor required to process an order by using the proper types of time units. It is quite simple, folks; it is called man-minutes. So if you have a labor tracking program, such as MVP™, why not use time units that are more reliable than BF, piece count, or dollar units? Using time units shown as man-minutes

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

www.todd-drummond.com

todd@todd-drummond.com

(603) 763-8857

√ TDC is Lean Six Sigma Certified

90+ Companies Completed 25+ Years in the Truss Industry 10+ Years in the Consultation Business

Do you have MiTek® MVP™ in your truss manufacturing but have failed to create a reliable labor estimation in the labor estimation setup? Do you need the MVP program to be more effective for estimating the labor man-hours for scheduling and efficiency ratings? Let TDC help you! My time standards have been created and refined over the past 12 years to adjust for most of the manufacturing equipment types and lumber material sizes.

120+ factors to choose from that can be inputted into MiTek MVP™ and also for the MBA™ for truss labor estimations. TDC can either provide while onsite or simply email you the time (labor) standards for you to input yourself. Todd Drummond Consulting LLC is an independent consulting service and is not affiliated with the MiTek Corporation. MiTek MVP and MBA are registered trademarks of the MiTek Corporation. TDC time standards services apply only to MVP and MBA labor estimation setup and not to any other aspects of the MiTek programs. Contact me for details. is a far more effective way of estimating expected labor time when they are properly set up and applied correctly. (R.E. or S.U. are also time elements) However, unless you are like most people who have never had industrial engineering training and understand how to develop and apply proper time units, you are likely quite unfamiliar with how effective they are. I do have training in proper industrial engineering practices, and, since 2003, I have been developing labor standards using man-minutes defined for different equipment and material types for truss labor estimation programs (not just MiTek). So my message is that if you have MiTek MVP™ for truss manufacturing but have failed to create reliable labor estimation, and if you want to use it for scheduling, efficiency ratings, and an effective incentive program based on actual productivity efficiencies, allow Todd Drummond Consulting, LLC (TDC) to help you! TDC can either provide you with the proper time (labor) standards while at your location during a consultation or can simply email them to you for you to input yourself. TDC time standards have been created and refined over the past 12 years to adjust for most manufacturing equipment types and lumber material sizes. There are more than 120 factors from which to choose that can be inputted into MiTek MVP™ and MBA™ for truss labor estimations. Other truss labor-estimating programs can also use these same factors. Todd Drummond Consulting, LLC is an independent consulting service and is not affiliated with the MiTek Corporation (no referral or commission fees go to TDC). MiTek MVP and MBA are registered trademarks of the MiTek Corporation. Don’t let this build season pass you by without you knowing exactly what is being done, when it is being done, and how it is being done in your truss manufacturing. If you are a MiTek customer, you should be using MVP™ in your facility, so tell your sales representative to install it at once if you don’t have it! Give TDC a call and I will be more than happy to help you to become far more effective in using proper labor-time units. Page 21

Component Manufacturing Advertiser

July 1st, 2016

Automated Saws

Roof Truss

Floor Truss

1-866-647-7771

M ACdverti$er

Th e

omponent

anufacturing

Adverti$er

Don’t Forget! You Saw it in the

Wood Truss Systems

TRUSS EQUIPMENT

manufacturers’

Mitek 40' Floor Truss Machine Build floor truss depths up to 24”, lengths up to 40’. Track Mounted Roller Gantry with Ride Platform. 230/460 Volt - 3 Phase - 10 HP Motor. Overhead Plate Rack. Dual Safety Bars. Air Cylinder Clamping. Stored outside for 2 years. $21,900 Now $20,900 NOW $19,900. FOB GA Wasserman & Associates 800-382-0329 www.wasserman-associates.com

July 1st, 2016 #09204 Page #23

Representatives

12' Finish Roller Press Press was purchased used in 2006, painted and wired for service but never utilized. An excellent press for smaller wood components including jacks and valley sets. 120V, 1 phase power. $6,490 FOB NY Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2005 Robbins No-Rail Roof Gantry Head & Tables

Mitek 14' x 100' Side Eject Roller Gantry System Mitek 14’ x 24” Diameter Roller Gantry (Track Mounted). 100’ of Walk-Thru Steel Top Tables with Pop-up Skatewheel Conveyor. Unistrut Jigging & Jig Hardware. Powered Exiting Conveyor with Receivers. Mitek 14’ x 24” Diameter Finish Roller. Outside Conveyor with Peak-Up Truss Stacker. $59,500 NOW $50,000 FOB AR. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Klaisler 51' End Eject Roller Gantry System Klaisler 14’ x 24” Diameter Gantry Roller (track mounted) with Hydraulic Roll Lifter & Ride Platform. (10) 4’-8” x 14’-0” Steel & Plastic Top Tables with Pop-up Rollers (for end eject). (1) 4’-8” x 7’-0” Steel & Plastic Top Table. Floor Rail. 208 Volt / 3 Phase. Excludes: Jig Hardware, Finish Roller & Outside Conveyor. $22,500 FOB MB. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Th e

Component Manufacturing dverti$er

Serving the Structural Building Components Industry

CMF Stealth End-Eject Tracked Roof Gantry System End-eject CMF Stealth tracked roof truss gantry system with 14’ by 56 foot working length. System features (8) eight slotted steel top tables with ejectors, (1) one 24” Stealth diameter gantry head, (1) one Stealth 24" finish roller press with 14 foot throat and (13) idler rollers. Includes all available electrical and jigging hardware. 440 volt, 3 phase electrical. $68,890 FOB QC Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Klaisler Finish Roller Press Klaisler finish roller press, 14 foot wide final roller with 18 inch diameter steel rolls, heavy-duty steel frame, continuous shaft supported by 4 baffles. Twin 5 HP drive motors (10 HP total), push-button controls with one safety bar, dual drive chains, idler gears and sprocket guards. Recent frame and electrical control repairs made in June of 2016. See video posted below. 240v, 3 phase electrical. $8,390 FOB NY Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Head is designed for use with trackless tables with or without aisles, includes 10 HP drive with electronic soft start, 24" diameter roll, s/o cord, pendant push-button controls and emergency stop bars. 600 volt, 3 phase electrical. Tables are slotted steel tops. (5) tables total, (3) of which are missing skatewheel ejectors (side eject), (1) with broken ejector and (1) ejector assembly is available but uninstalled. (1) table has bent gantry support tube. $44,990, FOB QC.

765-751-9990

Wood Truss Systems

manufacturers’

Representatives

NEW!

New Square 1 - 40’ Trackless Floor Truss Gantry New, table guided (NO rail) floor truss machine by Square 1 Design & Manufacture. This well designed machine builds floor trusses up to a standard 26 inch depth (32 inch optional). Working length of 40 feet. Other features include side eject, flip jig for build side, pop-ups for back plate side. Clamping by under-table cylinders controlling above-table steel fence. Floor truss gantry features twin 7.5 HP gearmotors for a total of 15 HP, 24 inch diameter roll, safety bars, 3 7/16” diameter, full-roll-length shaft with baffles. 440 volt, 3 phase. Price includes installation supervision from the manufacturer. Also take advantage of the Square 1 factory promotion offering a $5,000 savings on a Rolsplicer or Floor Truss Finish Roller (FTFR) with the purchase of a new SQ-Series floor system through April 15th, 2016. $99,412, FOB IN

765-751-9990 PHONE: 800-289-5627

www.woodtrusssystems.com

Read/Subscribe online at www.componentadvertiser.com

www.woodtrusssystems.com FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

July 1st, 2016 #09204 Page #24

Adverti$er Building Roof Trusses for High Density Housing Don’t Forget! You Saw it in the

by Joe Kannapell The differences between high density attached and tract style detached housing extend to the shop floor. Though truss designs may be similar, the project size, location and degree of repetition differs, influencing unit labor costs and material requirements. High density means “maximum square footage on minimum amount of land.” Traditionally this has been achieved via loft spaces in steeply sloped roofs. Recently though, even more living space is gained by extending buildings to four or five stories. Height restrictions often necessitate flat or nearly flat roofs. Truss manufacturing is affected in the following areas: Materials: Higher lumber grades and/or LVL chords are needed for larger attic rooms and for shallower depth trusses. Fire retardant material may be required in urban areas. Since higher grades of treated lumber are not usually stocked at treaters, extra lead time may be required. Cutting: Linear saws are clearly favored to cut the many short members in shallow trusses. Nesting the cuts of the web members below and cutting them from optimal board lengths can reduce material cost by more than 5% compared to a component saw. Since many of these short pieces (w5 to w13) look nearly identical to truss builders, ink marking at the saw saves considerable table time. More advanced marking is also available that identifies the “face-up” of the board, the top-chord end of the piece, and the truss plate locations. This refined identification minimizes material handling – enabling pieces to be placed in the right position and orientation the first time.

Fabrication: Building large quantities of short roof trusses on a 14-foot table and conveying them on 14-foot exit rollers seems like an incredible waste of floor space. Given that height restrictions and contemporary architectural requirements continue to increase the volume of these lowrising trusses, alternate fabrication methods are worth exploring. For example, an 8-foot wide single pass truss table can fit into a narrow space against an exterior wall or column-line. Its two-man build crew can easily hand stack and band trusses on a cart in an aisle adjacent to this table, while staying under roof cover. This table can greatly increase the overall plant efficiency, as the main gantry lines focus on a more consistent mix of larger trusses. Contrarily, attic room trusses, which utilize the full width of a gantry table, can be even more labor intense. Though automated jigging may help maintain level ceilings, manual jigging is often needed to insure that room walls are plumb. In addition, code-required insulation depths often require frame downs between collar-ties and room walls, as shown here. Additional studding is needed in the end truss. Note the skillful use of a “K-web” configuration at the intersection of the floor with the room wall. Though a solid 1.5 x 16” x 28’ LVL bottom chord member would eliminate 16 of the 28 pieces in this design, its added material cost would far exceed the labor savings. [Examples courtesy of Trussway Fredericksburg and Builders First Source, Culpeper, VA] Next article: Material handling opportunities.

Figure 4 PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Juggling Boards? The Rolsplicer by Square 1 Design & Manufacture Inc. is the only Splicer to Level, Compress and Splice a floor truss chord on X, Y & Z axis Providing the fastest, safest & highest quality splice in the industry !

1-866-647-771

M ACdverti$er

Th e

omponent

anufacturing

Adverti$er

July 1st, 2016 #09204 Page #26

Don’t Forget! You Saw it in the

TRUSS EQUIPMENT

NEW!

Square 1 Vertical Truss Stacker

Engineered to operate through all seasons. Sumitomo High Torque Break Motor (no air or hydraulic unit to maintain). 35 Second Cycle Time. Each pedestal will hold from 10 to 25 trusses depending on truss size & weight. Floor Truss Stacker (stack 14’ to 50’ trusses). Roof Truss Stackers (stack 14’ to 50’ or 20’ to 70’ trusses). Agricultural & Large Residential Roof Truss Stacker (stack trusses up to 120’). Powered Outside Conveyor. Control Panel

2002 Alpine Floor Truss Machine Alpine model 748A floor truss roller gantry, kick-leg, steel top, single bay with shifting camber feature. Half-inch camber over the 40 foot working length is shifted manually after the truss is flipped over and replaced in the jig. Table is 3'-8" wide x 40' long, 1/2" thick steel top with mechanical, doubleacting, locking clamp system, 5 HP motor with gear reducer and (4) end-stop jig pieces. 240 volt, 3 phase, 14A electrical. $19,890, FOB VA. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Do You Have Thousands of Dollars in Off-Line Obsolete and Unused Equipment and Parts!

Sell It! in the

800-382-0329 | www.wasserman-associates.com

Wood Truss Systems

manufacturers’

Th e

Representatives

Component Manufacturing dverti$er

Serving the Structural Building Components Industry

NEW!

Marquis 14' x 24" Finish Roller Press Marquis Hydraulics brand finish roller press, 14 foot throat, 24" diameter rolls, 7.5 HP motor, grease fittings, push button controls with safety stop on panel box. 575 volt, 3 phase electrical. $9,990, FOB QC Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Call 800-289-5627 x3

Table Guided Gantry System by Square 1 Manufacturing

765-751-9990 PHONE: 800-289-5627

www.woodtrusssystems.com

2007 Gimar 12' x 38' Truss Press •60 Ton Pressing Capacity •Slotted Table Top with Plastic •Joystick Control •600 Volt / 3 Phase $86,900 FOB QB Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

Adverti$er

Don’t Forget! You Saw it in the

Alpine ALS Owners:

When is a member gap not a member gap?

July 1st, 2016 #09204 Page #27

Building trusses with tight member to member joints insures accurate truss profiles and consistency between setups. The member to member gaps are limited to 1/8” and 1/16” on floor truss chord splices. This requirement is primarily concerned with compressive joint situations where excessive load might collapse a gap creating a buckle in the plate.

We have Z1 Actuators! And same-day shipping with our Exchange/Core Credit program.

Keep down-time to a minimum and save significant dollars with Eide Machinery’s Z1 Actuator Exchange/Core credit program. We have rebuilt OEM Z1 Actuators on our shelf, ready to ship. Orders placed before 3pm CST can ship the same day! This is how it works − Order from Eide Machinery and we will ship you a rebuilt and warranted Z1 Actuator – you choose the shipping method to match your needs. Once you install your rebuilt actuator; put the old actuator in the same box, apply the included return-address shipping label, and ship it back to us. You will receive a returned core credit on your account once we have determined that your exchange actuator is repairable (in 4 years we have not had one that wasn’t).

Actuators are rebuilt to 100% factory new specification and come with a full (90) day warranty. Look to Eide Machinery for New, State-of-the-art Component Manufacturing and Material Handling Systems, Used and Reconditioned Machinery, Parts and Supplies, Service and Repairs. Check out our Used & Reconditioned Equipment Listings!

We know machinery. Machinery ~ Supplies ~Since 1927~

Toll free 800-344-EIDE | www.eidemachinery.com 3219 North Second Street Minneapolis, MN 55411-0397

PHONE: 800-289-5627

The truss designer utilizing the design software should take special care to provide logical joints that make assembly straight forward and reasonable. In the photo above at a pitch break, the web (3) and vertical web (2) configuration has created a gap between these members. This was created because the software was used in a manner which generated the two angle web (3) cut against the first chord (A) and the chord's square end cut rather than cutting against the vertical web (2). It should be noted – The software will take into account this gap and generate an acceptable plate and connection accounting for the gap, however, the existence of this gap creates confusion and difficulty distinguishing member gap situations related to misplaced webs, mis-calibration cuts, or other culprits at the table. It may also require a larger plate and/or gauge requirement. Based on these issues, it is recommended that designers keep these considerations in mind when designing components. Occasionally, these types of situations occur when there are extensive manipulations of trusses during the design process or overall poor design practices. Designers should take special care to review joints for effective, sound connections. It will provide benefits in the shop and will also generate the best plate selection for the job at hand. Glenn Traylor Structural Building Components Industry Consultant http://www.linkedin.com/in/glenntraylor

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

Adverti$er

Don’t Forget! You Saw it in the

July 1st, 2016 #09204 Page #28

ACHIEVING YOUR PLAN TO MOVE AHEAD TAKES A PARTNER WHO’LL REALLY GET BEHIND IT.

We’ve been helping production facilities all over the world make their plans a reality for three decades now. And it’s a tradition we build on every day, with proven experience, vast industry contacts, and a penchant for creative, effective problem solving. If greater efficiency, productivity and profitability are part of your plan, we hope you’ll plan on talking with us.

www.WoodTrussSystems.com • 765-751-9990

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

TRUSS EQUIPMENT

Adverti$er

Don’t Forget! You Saw it in the

TRUSS EQUIPMENT

Wood Truss Systems

manufacturers’ Alpine Tables with Rail Quantity of five (5) 6' x 14', Alpine tracked gantry tables with slotted steel bottom chords, HDPE plastic tops and (4) skate wheel ejectors. Includes 39' of 80 lb. crane-rail with base plate, and one air-valve control. $12,490 FOB SC. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2000 80' Pacific Automation Roof Truss Gantry End-eject roof truss system, 14'X80' working length featuring one, TR-14 raised-rail, gantry head with 24" dia. roller and inverter drive. Features 11 slotted steel, J-Slot tables, single park-station, and some conveyor roller complete with all available hardware. 575V 3Ph power. $78,990 NOW $69,690 FOB ON. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

1996 MiTek Tracked Floor Truss Machine MiTek tracked floor truss gantry with pendant controls. Features 24" dia. roller and builds trusses from 9" to 22" depth and up to 32' in length. Side-eject with twin 5 h.p. drive system and dual safety bars. Recently recondition by seller. 230v, 3 ph. $17,990 FOB NC.. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

CMF Stealth Gantry Roller Only CMF Stealth 14’ x 36” Diameter Gantry Roller (Track Mounted). Safety E-Stop Bars. $18,000 FOB IL. Wasserman & Associates 800-382-0329 www.wasserman-associates.com PHONE: 800-289-5627

July 1st, 2016 #09204 Page #29

Representatives

NEW! Refurbished 1997 CMF Tracked Gantry System 1997 side eject CMF tracked gantry system with 14’ by 93 ft. working length. Tables and finish roller press were refurbished in 2007. System features (13) plastic topped tables with slotted-steel bottom chords, (1) 24” CMF diameter gantry head, (1) CMF 24" finish roller press, (4) idler rollers, and all available receivers. 440 volt, 3 phase electrical. $43,890 NOW $22,990 :: FOB WA. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

New Square 1 Short Roof Truss Finish Press Four-foot* wide x 3 1/2” tall throat. The unique “uni-body” construction creates a ridged machine that houses 12” diameter rolls, 7 1/2 HP motor with integrated brake, and 80# chain drive. This FRP features 114 FPM speed, emergency shut-off bars, and full chain and sprocket guards. Available options include: Other roller widths, Heavy-Duty upgrade, gear motor drive, and soft start controls available at an additional charge. 208, 240, 480 volt electrical. $15,750 FOB IN 1992 Clark Industries 14' Tri-Axis Press with Kick-Leg Table Model 4000 Gantry Press (14’) with Joystick Control, Ride Platform & Floor Track. 20 HP Hydraulic Pump Motor. 16” x 19” Pressing Platen. Kicklegs & End Stands for 12’ x 50’ Table. Combination Steel/Wood & Plastic Top with Jig Bars $28,000 FOB MI Wasserman & Associates 800-382-0329 www.wasserman-associates.com

1983 Jager Travelmatic Mini III Hydraulic Bridge Press Designed for smaller trusses the system is capable of handling 2”x4” and 4”x2” trusses with no adjustment, ideal for hips, jacks, and valley-sets. No finish press required, system consists of a 6’ x 40’ drilled & tapped steel table, table guided press head (trackless), with a 6’x12” press platten, riding operator platform and all available jig hardware. 575 volt, 3 phase electrical. Price: $13,890 NOW $9,890 :: FOB ON. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

765-751-9990

www.woodtrusssystems.com

Square 1 SQ-Series Floor Truss Machine (Table Guided) • 24” Diameter x 3/4” Wall x 6’-6” Long Gantry Roller • 3 7/16” Diameter Continuous Shaft Supported by 3 Baffles • Dual 7.5 HP Sumitomo Cyclo 6000 Gear Motor • (4) Drive Wheels Run on Top of Table with (8) 3” Osborn Cam Followers Under Table • ”Soft Start” Inverter with Square 1 Easy ID Software • Flashing Motion Indicator Beacon Light • Front & Rear Emergency Shut Off Bar • Integral Mechanical Fail Safe Brake • 230/415/460/575 Volt - 3 Phase • 6’-6” Wide x 40’ Long Steel Table • 3/4” Steel Table Top • Clamping Rails & End Stops • Built-In 1/2” True Arc Camber to Both Clamping & Side Rails • Electrical Track & Air Cylinders are Under the Table • Build up to 40’ Floor Trusses with Option for Additional Length • Floor Truss Depths from 9” to 26” with Option for Additional Depth • Optional Pop-ups, Flip Jig (shown in photos) & End Eject (shown in photos)

NEW!

$86,162 FOB IN

800-382-0329 | www.wasserman-associates.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M m ACdverti$er

Th e

omponent

anufacturing anufaCturing

Don’t Forget! Don’t Forget! You Saw it in the

Adverti$er

November July 1st, 2015 2016 #09204 #08196 Page #30 #24

New Productivit Wall Panel Manufac PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M m ACdverti$er

Th e

omponent

anufacturing anufaCturing

Don’t Don’t Forget! Forget! You Saw it in the

• • • • • • • • • • • •

ty in cturing PHONE: 800-289-5627

November July 1st, 2015 2016 #09204 #08196 Page #31 #25

Adverti$er

FEATURES One Tool System (Change from Staples to Nails in Minutes) Programmable Fastener Patterns wit PLC Touch Pad Entry Accommodates 2”x4” and 2”x6” Walls Straight Line Stitching Away and Towards You Bridge Tilt at Sheathing Seams to Eliminate “Shiners” Adjustable Bridge Speed for Accurate Alignment Auto Return to Park Section on Tool Bridge Laser Pointer for Identifying Fastener Placement Powered Height Adjustment (8’ to 12’ Wall Height) Pop-up Skate Conveyor Cantilever Table Which Allows Floor to be Free of Obstacles Optional Stud Locators

$67,500

Installation Support Available in the US & Canada

See More On-Line at

www.wasserman-associates.com Ph: 800-382-0329

Fax: 402-761-2422

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

PHONE: 800-289-5627

Adverti$er

Donâ&#x20AC;&#x2122;t Forget! You Saw it in the

Read/Subscribe online at www.componentadvertiser.com

July 1st, 2016 #09204 Page #32

FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

Adverti$er

Don’t Forget! You Saw it in the

July 1st, 2016 #09204 Page #33

WALL PANEL EQUIPMENT

DeWalt Panel Saw Vertical panel saw, 10 foot long, utilizes 13 amp 120v industrial saw motor, DeWalt circular saw with 8" blade, crosscuts material up to 64" wide and 1 1/2” thick. Included PDF service manual. $2,100 FOB QC Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Carlson 9' x 16' Wall Panel Line Framing Table with Stud Locators, Skatewheel Conveyor & Pneumatic Plate Clamping. Squaring Table with Router Bridge. Sheathing Table with 16 Tool Panel Bridge. Excludes Bostitch Nail Guns on Panel Bridge. Triad CN-4 Sub-Component Nailer. $14,900 FOB PA Wasserman & Associates 800-382-0329 www.wasserman-associates.com

JobLine.com, inc.

The

800-289-JOBS

Viking Framing Station Viking 38’ framing station with walk through design includes H.D. stud locators (16” & 24” centers), skate wheel ejectors, Powered tool carriages with three (3) tools per side, Auto-Plate Stops, and dual operator controls. Once staged the framing sequence is event driven, including 2x4 or 2x6 material size System allows assemblers to work from both the top and bottom chord for increased productivity. Builds walls from 4' to 12’-0” high. System support, and installation available from the OEM. 480 volt, 20 Amp, 3 phase electrical. 15 CFM air at 100 PSI. Price: $31,000 :: FOB OH Wood Truss Systems 765-751-9990

NEW PortaFramer 16' x 7'-9" to 10'-6" Trailer Mounted Wall Framer 2" Ball Coupler. Safety Chains with Hooks. 2,000 Lb Jack with Wheel. Wheel Fenders. 12" White Spoke Wheels. Primed & Painted White. Galvanized Platform Stands. Galvanized Rollers & Cross Members. Stainless Steel Guide Pins on 16" Centers. Stainless Steel Air Cylinders. Stainless Steel Push-In Air Line Fittings. Water Separator & Regulator with Gauge. $15,000 FOB MO. Wasserman & Associates 800-382-0329

WALL PANELS MADE EASY Truss Designers & Panel Designers Available NOW! Screened, Tested,

Guaranteed! www.thejobline.com

PHONE: 800-289-5627

32' Framing Table Manually Adjusts to 8’, 9’ and 10’ Wall Heights. Air Storage and Couplers in Table Frame. 2 Tables Available (1 at $4,900 or Both for $9,300). $4,900 FOB KS Wasserman & Associates 800-382-0329 www.wasserman-associates.com Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

You Saw it in the

Wood Truss Systems

manufacturers’

Adverti$er

Don’t Forget!

July 1st, 2016 #09204 Page #34 Wall Panel Equipment

Representatives

NEW! CLICK HERE for more information New Panels Plus Wall Panel Framing Equipment

Consider Panels Plus wall panel assembly equipment for manufacturers of wood or steel wall panels, floor-panels, and related framing components. Panels Plus is an employee owned, ISO certified, manufacturing company that builds state-of-the-art equipment featuring durable construction, with fit and finish second to none in the structural building component industry. The referenced base framing table allows you to assemble from 7-12 foot wall heights, at industry standard 16 foot lengths, at a working height of 29 to 32 inches. This framer design includes controls at each end of table, squaring stops and pneumatic clamping for consistent wall panel quality. Frames 2x4 or 2 x 6 walls, with color-coded, steel stud locators at 16 and 24 inches O.C. spacing. Includes pop-up skate wheels for easy transfer of completed wall frame. Framing table can be configured to receive wall framing light bars, other options include custom buildable wall heights, lengths and auto-indexing of optional 2 or 3 tool carriages. Additionally from Panels Plus are sheathing tables with features that include foot pedal control at squaring end of table, with squaring stops, roller conveyors at both sides, single pendant controls for bridge, tool spacing at 6 inch centers with 3 inch bridge shift for offset nailing. Tool bridges can accommodate from 2 x 4 to 2 x 8 walls, with seam tilt being standard equipment Panels Plus Tool Bridges are available with single beam or dual beam design for two different tool mounts on one bridge. Squaring stations, sub-component tables, conveyors and panel lifts are also available to complete the configuration of the wall panel assembly line. Price includes factory installation and training. 50 CFM at 120 psi air. 120 or 230 volt, 1 phase electrical.

765-751-9990

www.woodtrusssystems.com Wall Panel Equipment

NEW! New Component Table with Skatewheel Conveyors • Lift & Extend Skatewheel Conveyors • 10’ x 10’ Work Area with Squaring Lip • Gun Holster & Nail Tray

$7,900 FOB NE

2008 Hain 12' x 16' Framing Table • Wall Lengths up to 16’ • Powered Height Adjustment (8’ to 12’ wall heights) • Single Gun Tool Dollies (excludes nail guns) • Pop-up Skatewheel Conveyor • Ball Screw Telescoping System (Repeatable to .015”) • Retractable Plate Clamps • 110 Volt / 1 Phase • Includes 20’ of Roller/Skatewheel Conveyor $15,500 FOB AZ Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Th e

Component Manufacturing dverti$er

2008 Panels Plus 2-Station Wall Panel Line 2008 Panels Plus series 312 framing station, 16 foot long table x 12 foot framer with (2) two-gun tool dollies and MiTek light bars (light bars have damage). Includes push button controls, color coded stud locators at 16 inches & 24 inches o.c. spacing, motorized telescoping arms for wall heights from 7 to 12 feet. Clamps wall prior to nailing, includes squaring stops and foot pedal control. Builds both 2x4 and 2x6 walls, requires 30 CFM at 120 psi and 120v or 230v, single phase electrical service. 2008 Panels Plus series 3000 sheathing station with dual-beam, multi-tool bridge. Squaring table with bridge mounted tools that fastens sheathing to framed wall panels (2x4 and 2x6) up to 16 foot in length, and 7 to 12 foot wall height. Each beam holds (24) tools at 6’ o.c. (48 tools total, nails or staples). Includes pendant control, autoreturn, laser pointer, with HD motorized, foot-pedal controlled telescoping arms for wall height adjustment, hand-crank tool bridge for precise stapling/nailing, remote fire with offset shift, and tilt function for fastening seams. Requires 60 CFM at 120 psi, 120v single phase electrical service. Also includes set of Panels Plus subcomponent lay-out table with pop-up ejectors, all available stud locators (removed for light bars), (8) 15 feet long skatewheel conveyors with stands, (5) ShopNet work stations with stands, monitors, enclosures and all available PC hardware, (9) yellow outfeed rollers, four of which are in a floor-mounted bed and panel lift. Some tools included subject to dealer-approved transfer. Sold for $150.000 new in 2008. $79,990, FOB NJ Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Serving the Structural Building Components Industry

800-382-0329 | www.wasserman-associates.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

July 1st, 2016 #09204 Page #36

Adverti$er

Don’t Forget! You Saw it in the

TRUCKS & TRAILERS

1999 ASI/Haulin 42'-60' Expandable Roll-Off Trailer (Reduced) Hydraulic Lift Neck. Sliding Tandem Axles. Air Lift Load Control. DOT is not current. $6,900, FOB IL Wasserman & Associates 800-382-0329 www.wassermanassociates.com

1990 Ford F800 Truck with 1982 Barns Truss Trailer

•Low Mileage Unit in Good Condition FANTASTIC DEAL! $9,900 FOB CA Wasserman & Associates 800-382-0329 www.wassermanassociates.com

“Serving the Component Industry Since 1996”

Now offering short term Working Capital Loans

Start smarter... 2002 A-Nu-Prospect 48' Roll Off Trailer Features sliding tandems, hydraulic neck, Grow faster... galvanized headache rack, & locking Detailed list of repair items for Achieve more... rollers. DOT compliance is available upon request.

Keep More of Your CASH Eliminate Yearly Financial Reporting

Low Fees Fixed Payment Programs No Additional Collateral

$11,900 FOB MN - As is - where is. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

cvillella@acceptlease.com | www.acceptlease.com 894 Beaver Grade Road, Suite #304 - Moon Township, PA. 15108 Phone: 412-262-3225 Fax: 412-262-1154 TRUCKS & TRAILERS

2004 Hot Shot 43' Roll-Off Trailer Hydraulic Raised Roller Bed. GVWR: 24,000 Lbs. Tandem Axle. Tires: 23516. Electric Brakes. Headache Rack. Manufactured by R & R Truck & Trailer (7-26-04). $9,500 NOW $8,500 FOB IL. Wasserman & Associates 800-382-0329 www.wassermanassociates.com MISC.

1996 ASI 48'-70' Stretch Roll-Off Trailer •Sliding Tandems •Hydraulic Neck •Tires are good •DOT is current $22,000 NOW $19,900 FOB IA. Wasserman & Associates 800-382-0329 www.wassermanassociates.com

2000 Prentice Telestik-33 Material Handler 32’-10” Boom. 4,000 Lb Payload. Excludes Truck. $10,000 FOB GA. NOW $8,000 Wasserman & Associates 800-382-0329 PHONE: 800-289-5627

2016 Precision Equipment Roll-Off Trailers 40', 48' and 53' Fixed Lengths. 36' to 51', 42' to 60', 46' to 64', 50' to 70' and 53' to 80' Expandable Lengths. 102" Wide. Air Lift ICC Bumper. Self Contained Hydraulic Power Unit. Spring Loaded Composite Fenders. Dual Rear Rollers. New Low Pro Tires. Air Operated Roller Pin Lock System. Air Operated Load Control System. Sliding Air Ride Suspension. Strobe Lighting. Mesh Between All Rollers. Patented Load Lifts. LED Lighting System. Extend-a-Rail. 4" x 35' Load Straps. Patented Strap Locks. Strap Winches. Dove Tail on Rear of Trailer. Hydraulic King Pin Plate. Removable Headache Rack. 7 Way Receptacle on Rear of Trailer. Split Rollers. Sliding Winch System. Aluminum Tool Box. Trailer is Sandblasted & Primed with PPG Polyurethane Paint Wasserman & Associates 800-382-0329 www.wasserman-associates.com

1997 Road Boss 48’ Gooseneck Trailer Triple Axle Trailer. $7,250 FOB NV Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2000 Alloy 48'-70' Expandable Roll-Off Trailer Model AE-70. Hydraulic Lift Neck. Sliding Tandems. Spring Suspension. Tires & Brakes are Good. New Spare Tire. Air Operated Roller Pin Locks. Lift Bars on Upper Half of the Trailer. DOT is Current. $27,500 FOB MD Wasserman & Associates 800-382-0329 www.wasserman-associates.com Read/Subscribe online at www.componentadvertiser.com

2004 Weima - Lenze Wood Processing System Weima model WL4S shredder, 30 HP drive with gearbox and limit switch, 10" diameter single-shaft with 1/2" grid screen, 23" x 41" hopper opening, PLC controls and 0.74 cubic yard hopper volume. A two-step wood processing process. Wood waste goes from the incline into the Weima grinder, to the short auger piece, then the 20' long auger at an incline, leading to the Lenze grinder. Includes $1,000 worth of replacement knives and other available spare parts. 25,000 operating hours logged. Picture of output shown with listing. 230 volt, 3 phase, 100 Amp electrical. $37,990 FOB WI Wood Truss Systems 765-751-9990 www.woodtrusssystems.com FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

July 1st, 2016 #09204 Page #37

Adverti$er

Don’t Forget! You Saw it in the MISC.

To uncover what’s possible, abandon what’s comfortable!

2003 Challenger Wood Grinder Model CH200-3037-S. Vibrating Infeed Conveyor. Oufeed Material Blower. Motor: 27 KW Brook Hansen (480 Volt / 3 Phase). Cutters: Small FIXCUT @ 58. Screen: 1/2” @ 2 Sections. $19,500 FOB IL. Wasserman & Associates 800-382-0329 www.wassermanassociates.com

Virtek Laser Projection System (14 Heads) •1998 thru 2002 Model LPS-2DI Heads •(14) Red Laser Heads •(1) Computer Cabinet (Excludes Computer) $28,000 FOB IL. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2010 USIFAB Roof Truss Vertical/Flat Stacker Price: $63,980 :: FOB QC Condition: Good Category: Material Handling Description: 90 foot long, 3-station single/dual/tandem, peak-up, hydraulic powered roof truss stacker with electrical control panel and remote control for operator use. System includes 90 feet of conveyor capable of travel speed up to 140 feet / minute. Nine (9) arms rotate to 90 degrees for Peak-Up stacking, plus lateral transfer on opposite side for flat stacking. 15 GPM hydraulic unit with 15 HP electric motor. Professionally manufactured by USIFAB R. L. Inc. (www. usifabrl.com). Currently wired for 600 V, 3 phase electrical power. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Fitzzgerald Group, LLC “A blending of excellent services and products, with answers that work”©

WoodRunner Conveyors Inc. Viking Walls MaxCustomCutter Wizzard PDS Drop-In Channels Gorbel Crane Technology Just a few or our profit enhancing parts that can make you whole!

630 Southpointe Court - #200 Colorado Springs, CO. 80906

719-528-5445 RFitzgerald@FitzGroup.com www.FitzGroup.com

theHAINCOMPANY | 6125 Enterprise Drive, Unit 9 | Diamond Springs, CA 95619 | 530.295.8068 | sales@thehaincompany.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Forward Thinking. Respecting the Past. Ask most people about the lumber industry and you’ll get a fairly predictable list of descriptions. What you’re not likely to hear are terms like: ● technologically advanced, ● sustainable logging, ● small log harvesting, ● green lumber products, ● commitment to healthy communities, and ● ecologically-minded forest management When people talk about Vaagen Brothers, that’s exactly what you’ll hear. Working in the forests of Washington for more than 50 years, we’ve learned to take the best of traditional logging and lumber milling practices and combine them with advanced production technologies and forward-thinking sustainable forest management practices to create a company that’s as vibrant and growing as the healthy forests and ecosystems necessary to its success. Contact us: (509) 684-5071 or info@vaagenbros.com

M ACdverti$er

Th e

omponent

anufacturing

Adverti$er

Donâ&#x20AC;&#x2122;t Forget! You Saw it in the

July 1st, 2016 #09204 Page #39

MISC.

JobLine.com, inc.

The

800-289-JOBS

Truss Designers & Panel Designers Available NOW! Screened, Tested,

Guaranteed!

NEW! New SL Laser Projection System New, laser projection system from SL Laser. Projects roof truss, floor truss and wall panel design images accurately onto building surface, for faster setup and fabrication times. Each laser head provides 21' projection length (@15 foot ceiling heights). Includes system computer, cables, mounting hardware for attachment to customer's structure, factory installation, training and choice of green or red laser. Works with each connector plate manufacturer's design software. Modular nature of the laser heads allows for easy, future expansion of system length. 120 volt, 1 phase. FOB NC Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2011 Todd Saw Notch & Drill System

$75,500 FOB CO.

www.thejobline.com

800-382-0329 | www.wasserman-associates.com

theHAINCOMPANY | 6125 Enterprise Drive, Unit 1 & 2 | Diamond Springs, CA 95619 | 530.295.8068 | sales@haincompany.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

Adverti$er

Don’t Forget! You Saw it in the

Wood Truss Systems

manufacturers’

July 1st, 2016 #09204 Page #40 MISC.

Representatives

New Square 1 Rolsplicer New 2014 Square 1 Rolsplicer splices 2"x3", 2"x4" and 2"x6" lumber with a 3-4 second cycle time. Presses the lumber together prior to imbedding plates. Features two, recessed, simultaneous-activation buttons, guarded motor and sprockets, external lubrication points, 3 HP motor and a footprint of 59" long x 42" wide. Optional 20' infeed and 10' outfeed conveyor available. 240 or 480 volt electrical. $15,500. FOB IN Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2007 Univeyor Automated Linear Conveyor System $88,990 NOW $59,000:: FOB BC More information: http://goo.gl/7ZB2LE 765-751-9990 www.woodtrusssystems.com Invicta DGI-40 16" Single Surface Planer (Used) •15 3/4” x 8 1/2” Capacity •25 & 46 FPM Feed Speeds •5,000 RPM Cutterhead Speed •7 1/2 HP Motor •230 Volt / 3 Phase •Powered Raise & Lower of Table $4,000 FOB WA Wasserman & Associates 800-382-0329 www.wassermanassociates.com

NEW!

Square 1 RolSpicer Chord Splicing System

Splices 2x3, 2x4 & 2x6 Lumber. 3 to 4 Second Cycle Time. 2 Recessed Simultaneous Activation Buttons. Guarded Motor & Sprockets. Greaseless, Maintenance Free Shaft Bearings. Compact Design (59” Long x 42” Wide x 44” High). Positive Press Tight Abutment. Hand Wheel Lumber Adjustment. 3 HP Sumitomo Gear Motor. Add $1,425 for 20’ Infeed & 10’ Outfeed Roller Conveyor with Stands.

$17,409, FOB IN. 800-382-0329 | www.wasserman-associates.com PHONE: 800-289-5627

Hain 20' Powered Measuring System Adapts to Any Saw. Left or Right Hand Operation. Feet & Inches System (Stops at 12” Centers) or Inches System (Stops at 10” Centers). Motor: 1/4 HP Linear Actuator (110 Volt). Stop Rail: 2 x 4 x 1/4” Aluminum Extrusion. Stops: Jig Bored Steel. Stop Blocks: Machine Billet Aluminum. Optional Lengths from 5’ to 60’. Optional Gang Stop. Add $770.00 per 10’ Section of Heavy Duty Roller Conveyor with Stands Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Read/Subscribe online at www.componentadvertiser.com

Cullen Model A40-2 Generator Set Detroit 12V-92 Engine.Capacity: 400 KW Capacity.Output: 120/208 Volt - 1388 Amps - 3 Phase..Control Panel..Skid Mounted..1,200 Hours. 30,000 FOB BC. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2010 Monet DeSauw Wood Finger Jointing Line Cut-Off/Shaper Unit with 5 HP Saw to Cut-Off Angles & 25 HP Cutter Head to Fingerjoint Ends. Delta 2 Bag Dust Collector. Glue Station with Apquip Glue Applicator & 6 Gallon Glue Pot. Hydraulic Finger Joint Press with Cut-Off Blades (2x4 and 2x6 Lumber). 480 Volt / 3 Phase. Save $$ on Disposal Fees, Earn Profit on Waste Material & Produce Straight Lumber. $58,900 NOW $49,500 FOB IL Wasserman & Associates 800-382-0329 www.wassermanassociates.com

2010 USIFAB Roof Truss Vertical/Flat Stacker 90 foot long, 3-station single/dual/tandem, peak-up, hydraulic powered roof truss stacker with electrical control panel and remote control for operator use. System includes 90 feet of conveyor capable of travel speed up to 140 feet / minute. Nine (9) arms rotate to 90 degrees for Peak-Up stacking, plus lateral transfer on opposite side for flat stacking. 15 GPM hydraulic unit with 15 HP electric motor. Professionally manufactured by USIFAB R. L. Inc. (www. usifabrl.com). Currently wired for 600 V, 3 phase electrical power. $63,980 FOB BC. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

FAX: 800-524-4982

Toll Free 800-382-0329

www.wasserman-associates.com

WizardPDS®™

drop-in Channels

Old technology turned state-of-the-art with WizardPDS® drop-in Channels™ Your table + our technology = Zero Set up time and NO manual jigging.

Retro fit now - own it in 6 months!

M ACdverti$er

Th e

omponent

anufacturing

July 1st, 2016 #09204 Page #42

Adverti$er

Donâ&#x20AC;&#x2122;t Forget! You Saw it in the

High Wind Guides for the Hurricane Season New design guides provide guidance for wind-resistive construction of wood buildings With hurricane season underway, several regions of the United States face the threat of wind-related damage to buildings. According to the Insurance Institute for Business and Home Safety (IBHS), high winds cause millions of dollars in property damage each year, with roofs representing 85 to 95 percent of those losses. The good news is that much of this damage can be avoided through quality design and new construction methods that are available to strengthen wood structures, including roofs, against wind damage. To help address the design challenges associated with high wind, the American Wood Council (AWC) has developed a series of Guides to Wood Construction in High Wind Areas. The guides establish a specific set of prescriptive, wind-resistive structural requirements for wood-frame buildings of certain sizes and shapes. The provisions of the guides, developed specifically for builders, are focused on ensuring structural integrity in resisting wind loads in compliance with the International Building Code (IBC) and International Residential Code (IRC), which are the model codes adopted in most jurisdictions. Often characterized by repetitive-member framing and robust connections, wood buildings inherently meet the challenges of high wind impacts. Notably, wood structural materials can carry substantially greater maximum loads for short durations that are often found during high wind events. Additionally, when structural panels such as plywood or oriented strand board (OSB) are properly attached to floor, roof and wall framing, they form very strong diaphragms and shear walls that are exceptional at resisting high winds. The guides from AWC recognize these benefits, while translating what is required by national model building codes for high wind. Separate documents are available that address wind design requirements for 115-, 120-, 130-, 140-, 150- and 160-miles-per-hour (Exposures B and C) wind zones. Areas particularly vulnerable to hurricanes include the U.S. Atlantic and Gulf of Mexico coasts where even basic design wind speeds are greater than 115 mph. Many in our industry have the opportunity to engage directly with builders, architects and engineers who are faced with the challenge of designing durable buildings. With the hurricane season upon us, I encourage you to help educate this audience by sharing these wind guides and other resources available from the industry â&#x20AC;&#x201C; help convince them that designing buildings to successfully withstand high wind forces is a core responsibility and can be achieved through use of appropriate wood construction. The Guides to Wood Construction in High Wind Areas are available for free download at the AWC website: http://www.awc.org/codes-standards/publications/ wfcm-2015.

Robert Glowinski is the President & CEO of the American Wood Council (AWC). PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

You Saw it in the MISC.

Door & Stair

UsiFab Chord Splicer UsiFab chord splicer splices 2"x3" through 2"x6" lumber. Presses the lumber together prior to imbedding plates. Imbeds plate lengths up to 13 inches. Features heavy-duty tubular frame, dual-recessed, simultaneousactivation buttons, guarded motor, sprockets and a 3 HP motor. 600 volt, 3 phase electrical. Price: $8,990, Condition: Good, Location: QC. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

M ACdverti$er omponent

Adverti$er

Don’t Forget!

Alpine Lumber Carousel Alpine model 407A, lumber carousel features (7) lumber bays each with 14 ft. max lumber lumber length (without overhanging the bay). Hydraulic drive with reservoir, 40' working diameter. 480v, 3 phase, 30A electrical. See video link and PDF shown with this listing. $9,690 FOB CA. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Th e

July 1st, 2016 #09204 Page #43

anufacturing

Serving the Structural Building Components Industry Metriguard Finger Jointing Testing Equipment •Metriguard Model 330 Press. •Humboldt Model H-30140 Laboratory Oven (115 Volt). •Pressure Pump & Vessel. •Lightly Used. •Excludes Associated Machinery Material Cart. $6,500 FOB NE Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2003 Triad Smart Stair Router System CNC (computer numeric controls), menudriven machine cuts 2x10 & 2x12 standard stair profiles w/touch screen controls. Two HD routers cut top or bottom stringer only, or both stringers simultaneously. Smart Stair Router accommodates standard stair profiles, no riser profiles, split stringers & open stringers with hardwood or softwood settings; cuts top or bottom stringers or both simultaneously. Features (2) HD 2 HP belt driven routers w/1/2" capacity collets, (2) stepper linear actuators for cutting profiles, (1) servo/stepper drive wheel for indexing, 628 lb. vertical clamp, 352 lb. horizontal clamp, industrial computer, and 4-axis motion controller. System includes 2260 Wedge & Glue Block Cutter to mix stacks of 1x and 2x materials in the same hopper. Cuts (2) wedges out of 1x material and (1) wedge out of 2x material w/walkaway hands-free operation. Capable of cutting glue blocks; bag-style dust-vacuum system included. Includes Triad stair assembly clamp for easy jigging of staircase assemblies. Accomodates up to 16 risers with a maximum width of 50". Price: $52,750 $47,750 NOW $32,750 FOB PA Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Like Money in the Bank. Service you can count on!

Four Arm Infeed Deck Price: $7,890 NOW $3,990 :: FOB PA 10' long x 10' wide 4-arm infeed deck, powered by a 1 HP motor, prism chain feed and deflector pans. 230/460 volt, 3 phase. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com PHONE: 800-289-5627

Ruvo 2200 Stair Saw Ruvo model 2200 machine capable of box stringers only and cuts two stringers at a time. The saw comes with a year warranty; 90/08 remanufacture including new cylinders, valves, tubing, fittings and electrical. Spindle motors are either new or rebuilt. The machine has been recalibrated, all known problems fixed, motor bench tested, machine cycled and video of cutting stringer can be supplied. Installation by the OEM is available at an additional charge. Wired for 230 volt, 3 phase and 30 amp electrical service. $22,677, FOB FL | AS NEW. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Norfield Magnum Door & Jamb Machine •Door Sizing/Beveling •Lock & Latch Drilling •Hinge Butt Routing in the Door & Jamb •Faceplate Routing up to 1 1/8” x 2 3/4” •Air Predrill & Air Screwdriver •Width: Doors to 4-0, Jambs to 10 1/2” •Height: Doors to 8-0, Jambs to 8-0 •Thickness: Doors to 1 3/4”, Jambs to 1 1/8” •Butt Sizes to 5” x 5” •Butt Spacing: Infinitely Variable •Lock Backsets from 2 3/8” to 5” •230 Volt / 3 Phase $8,000 FOB WA Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Read/Subscribe online at www.componentadvertiser.com

RUVO Model 925 Door Machining Center Interior & Exterior Door Machine will automatically: bore for the main lock hole. bore for the latch hole. rout for the rectangular latch plate. bore for the strike hole. rout for the rectangular strike plate. mortise for two or three hinges in both door & hinge jamb. Specifications: Door Height: 6’-6” to 8’-0”. Door Width: 1’-4” to 4’-0”. Door Thickness: 1 3/8” or 1 3/4”. Butt Sizes: 3 1/2”, 4” or 4 1/2”. Jamb Width: 2 1/2” or 10 1/2”. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2002 Builders Automation Template Stair Router Model RUWO 2000 MFSR. Cut Box and Open Stringers. Manual Setup with Auto Feed and Cut. One or Two Stringers per Cycle. 10’ Infeed and 10’ Outfeed Roller. Conveyor with Stands. 2 Bag Dust Collector. (2) Lift Tables for Staircase Assembly. 240 Volt / 3 Phase. $25,600 FOB NE. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Dotul Door Stop Stitcher Click Here for details $4,900 FOB GA Wasserman & Associates 800-382-0329 www.wasserman-associates.com FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

Adverti$er

Don’t Forget! You Saw it in the

NEW!

Parts House New Alpine AutoMill SC Component Saw Parts •(2) Controller Cards (drives) Manin RX/ TX (sold in pairs) •Controller Card (drive) TR03-500 •Bulkhead to Rack Blade #3 •(2) 22’ Encoder Cables •8’ Power Cable •22’ Resolver Cable •20’ Feed Back Cable •18’ Feed Back Cable •Main Power Supply (all racks) •(2) Green Relays •Contact For Shaker Pan •Original Angle 2 Servo Motor •Retrofit Servo Motor w/Bushing Kit Angle 3/4 •Retrofit Servo Motor w/Bushing Kit Material Conveyor Wasserman & Associates 800-382-0329 www.wasserman-associates.com Plates & hardware

Builders Automation Stair Stringer Router

Watch video here: http://goo.gl/gSRwjd More information here: http://goo.gl/mSsxyY 800-382-0329 | www.wasserman-associates.com Parts House Alpine AutoMill RS Component Saw Parts (5) Encoder Drive Belts (2) Encoder Drive Gears (1) Drive Circuit (3) Hold Down Drive Rod Couplers (4) 3/4" Encoder Couplers (5) Carriage Track Scrubbers (1) Encoder Data Cable (1) P.C. Data Cable Used Bimba 314-DXP Air Cylinder (9 (3) 1 1/2" Plastic Slider Bushings Available) $20 Each (Nebraska) (1) 1 1/4" Gear Encoder Coupler Wasserman & Associates (5) Encoders 800-382-0329 (2) Motor Brake Caliper & Disk Sets www.wasserman-associates.com Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Spread the Word! Tell Them You Saw it in the

(2) Used Triad Stud Locators mounted to (1) Bracket (30 Available) $45 Each (Nebraska) Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Th e

Component Manufacturing dverti$er

Serving the Structural Building Components Industry

Sell your Stuff

Including truss industry equipment parts and machinery that is “For Parts Only” Submit your ads with one photo, not to exceed 750k to: twm@componentadvertiser.org or Call: 800-289-5627 x 1 Standard Classified Rates Apply PHONE: 800-289-5627

July 1st, 2016 #09204 Page #44

New Mitek Truss Plates •3 Boxes - 1.0 x 7.0 MT (660 Pieces/Box) •6 Boxes - 1.5 x 4.0 MT (936 Pieces/Box) •3 Boxes - 2.0 x 4.0 MT (654 Pieces/Box) •3 Boxes - 2.0 x 6.0 MT (402 Pieces/Box) •6 Boxes - 3.0 x 12.0 MT (120 Pieces/Box) •6 Boxes - 4.0 x 8.0 MT (150 Pieces/Box) •6 Boxes - 4.0 x 16.0 MT (978 Pieces/Box) •3 Boxes - 5.0 x 8.0 MII (110 Pieces/Box) •7 Boxes - 5.0 x 10.0 MII (100 Pieces/Box) •4 Boxes - 6.0 x 7.0 MII (120 Pieces/Box) •4 Boxes - 6.0 x 10.0 MII (96 Pieces/Box) •7 Boxes - 6.0 x 12.0 MII (76 Pieces/Box) •4 Boxes - 6.0 x 16.0 MII (48 Pieces/Box) •5 Boxes - 6.0 x 18.0 MII (54 Pieces/Box) •7 Boxes - 7.0 x 10.0 MII (80 Pieces/Box) •7 Boxes - 7.0 x 12.0 MII (60 Pieces/Box) •7 Boxes - 7.0 x 14.0 MII (46 Pieces/Box) •20 Boxes - 7.0 x 16.0 MII (42 Pieces/Box) •7 Boxes - 8.0 x 12.0 MII (64 Pieces/Box) •4 Boxes - 10.0 x 14.0 SK-20 (44 Pieces/ Box) •6 Boxes - 12.0 x 14.0 MII (32 Pieces/Box) •6 Boxes - 12.0 x 16.0 MII (24 Pieces/Box) •4 Boxes - 3" x 60" MII (10 Pieces/Box) •6 Boxes - 4" x 60" MII (10 Pieces/Box) •4 Boxes - 5" x 60" MII (10 Pieces/ Box) •12 Boxes - 6" x 48" MT-18 (10 Pieces/Box) •5 Boxes - 6" x 60" MII (10 Pieces/Box) •7 Boxes - 7" x 60" MII (10 Pieces/Box) •3 Boxes - 8" x 60" MII (10 Pieces/Box) •5 Boxes - 9" x 48" MT-18 (8 Pieces/Box) •1 Box - 10" x 48" MT-18 (8 Pieces/Box) •8 Boxes - 10" x 60" MII (6 Pieces/Box) •4 Boxes - 12" x 60" MII (6 Pieces/Box) Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Read/Subscribe online at www.componentadvertiser.com

Does Your Truss Plant Have Thousands of Dollars in Off-Line Obsolete and Unused Equipment and Parts!

Sell It! in the

Th e

Component Manufacturing dverti$er

Serving the Structural Building Components Industry

Call 800-289-5627 x3

FAX: 800-524-4982

A family owned business you can trust

www.vaagenbros.com

M ACdverti$er

Th e

omponent

anufacturing

July 1st, 2016 #09204 Page #46

Adverti$er

Don’t Forget! You Saw it in the

LAYMAN'S LUMBER GUIDE Advanced Softwood Framing Lumber BUYING & SELLING Strategies Lumber CONTRACTS...Should You Ditch 'Em? A contract, for the purposes of this discussion is an agreement to sell or buy a predetermined quantity, size and grade of lumber or panels, typically between a consumer and a producer...priced at current market value, "Friday Prior to Shipment." The buyer is assured of receiving product on a reliable, timely basis and the seller is assured of a non-negotiable sale...regardless of market conditions. Contracts are good for the buyer when supply is tight, demand is strong and prices are typically rising. (2400 MSR is a good example of an item that might be contracted for availability.) Not so good when supply is abundant, prices are weak, flat or even volatile, like now. Prolonged, sustained rising prices are the only time when contracts are advantageous for the buyer. Ironically, that is when the contract is least desirable for the supplier/mill. It follows that the supplier of the contract is most satisfied when the deal is not good for the buyer. Therefore, when suppliers want to keep the contract it in place, buyers should get out. The best measure of the value of a contract is to consider price volatility. The more volatile and frequent the price fluctuations, the contractor yard, wood preserver, component manufacturer or distributor to should NOT have a contract. Why? Volatility is an opportunity for buyers to out perform contract prices. Frequent directional changes, periods of no price change, or short runs in one direction are evidence of ample supply. Advantage buyer. Disadvantage producer. Why? Because without a contract, buyers control when the P.O.'s are given. In falling markets, delay purchases until after weekly prices are published. In rising market, be proactive, buying before the next price increase. Short term, week-to-week evaluation is all that is needed to out perform contract pricing. •Each truckload of 2x4#2 SYP has had $3488 of price volatility per week over the first six months this year with twelve directional changes. •2x4#2 Canadian SPF has had $4750 of price volatility with ten directional changes. •OSB...$3300 with 13 directional changes. Just one contracted truckload of each per week is on track to potentially cost you $22,000 this year. Stop the bleeding!!! Twice weekly, Layman's Lumber Guide (Forecasts & Briefings) provides market analyses, forecasts, and buying strategies to profit from price volatility. Ditch the contracts. Trust your skill and mine. Let's trade this lumber market sensibly...together.

Happy Trading, Matt Layman, Publisher, Layman's Lumber Guide LAYMAN'S LUMBER GUIDE SUBSCRIPTION REQUEST

•Sunday Lumber Market BRIEFING (includes Weekly Volatility Index) • Wednesday Lumber Market FORECAST (complete forecast) •Monthly Lumber Market BLUEPRINT (30-60-90-Day Forecasts) Start Today. MONTH-to-MONTH...only $69. No long term commitment. Complete and Return This Subscription Confirmation Today. matt@laymansguide.org or fax to 888-811-6917 ___ (Charge (Charge card only) card ___$699 $69 MONTH-to-MONTH. $69 Month to Month only)Annually or

$699 Annually Contact Name ___ _________________________________________ Phone: _______________________ Contact Name: Company Name___

Company City___

Name:

Email address ___ Address: Charge Card # ____

Address___

_________________________________________ State___ Zip___ Phone #___

Subscribe on-line:

_________________________________________

Subscribe Now!

Expiration Date ___

City: ___________________ St: ______ Zip: _______ OR FAX to: 888-811-6917 e-mail Address: _________________________________________ e-mail to: matt@laymansguide.org PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com Lumber Market Intelligence...Matt Layman, Publisher PO Box 905, Belmont, NC 28012

FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

July 1st, 2016 #09204 Page #47

Adverti$er

Don’t Forget! You Saw it in the

LAYMAN'S LUMBER GUIDE

Softwood Framing Lumber Market Forecast & Trading Strategy Matt Layman, Publisher Week #26

June 29, 2016

Another Dimension Thought Provoking & Inspirational

Lumber Market HOTWASH Summary & Evaluation

Clean House More Frequently

Don't Bet Against the Summer

Some things serve no purpose, however we keep them around because we just don't take the time to dispose of them. More important issues consume our time. For example, stuff in the attic, garage and closet that hasn't been touched in a decade. It's not hurting anything, so we just leave it be. Laws, however could be a problem. Just for fun I Googled "Dumb Laws." Yep, there is a website. The angle that water comes out of a water fountain in health clinics is legislated. In Alabama "You may not have an ice cream cone in your back pocket at any time." In California, "Women may not drive in a house coat." In Florida, "Having sexual relations with a porcupine is illegal." In Indiana, "All males 18 to 50 years old must work six days a year on public roads." In Massachusetts, "All men must carry a rifle to church on Sunday." In North Carolina, "If a man and a woman who aren’t married go to a hotel/motel and register themselves as married then, according to state law, they are legally married." In Texas, "It is illegal to take more than three sips of beer at a time while standing." In West Virginia, "It is legal for a male to have sex with an animal as long as it does not exceed 40 lbs." Isn't it remarkable how we keep clutter in our lives that could potentially cause problems? Just sayin'... might need to let go of some old habits, methods, people.

Sure, circumstances and lumber market conditions change from time to time. The average lumber trader, buyer and producer tends to hold in reserve the possibility, even the likelihood, that approaching seasonal impacts will deviate from normal or average. Consequently, our lumber market finds itself under bought or over bought, under supplied or over supplied just prior those periods of increasing or decreasing seasonal demand. Ironically, that is what makes price direction and movement reliably predictable. The present expectation is that July will be a month of lesser demand and more abundant supply. Buyers historically under estimate demand and over estimate supply during the summer and are unwilling to accumulate an inventory cushion. Hence, they find themselves under bought in late June. The result is firm pricing in July. Sure, this year could be different; any year could, but why gamble against the historical July up trend and these 86% accurate forecasts? Why run the risk of having inventory outages due to trucking shortages during produce season? Why bet against business that can be seen? Looking Forward...Matt Layman, Publisher

Forecasted Decision Points (FDP) 2015-17 Composite SPOT PRICE Composite 2x4's #2 SYP-E, SPF-W, Dry Hem Fir, Green Doug Fir. (Blue). 2015-Current FDP's (Vertical Red Lines), reversals or accelerations, since 01/99: 419 FD P's…362 turns within 1 week. 86% FD P Historical Accuracy. Green Zone=Highest Demand Weeks #11-26; Yellow Zone=D aylight Savings Weeks #11 Through Week #44. Red Zone = Lowest Demand Weeks #43-10.

380 360 340 320 300 280

PHONE: 800-289-5627 Read/Subscribe online at www.componentadvertiser.com FAX: 800-524-4982 Layman's Lumber Guide Forecasting Suite...Matt Layman, Publisher Phone or Text: 336-516-6684 Fax: 888-811-6917 Email: matt@laymansguide.org www.laymansguide.org TWITTER.com/Laymansguide Join Matt Layman on LinkedIn

M ACdverti$er

Th e

omponent

anufacturing

Adverti$er

Don’t Forget! You Saw it in the

July 1st, 2016 #09204 Page #48

LAYMAN'S LUMBER GUIDE - FORECAST Softwood Framing Lumber Market Forecast & Trading Strategy Week #26 Wednesday

MARKET SNAPSHOT #2 2x4 SYP-Mill #2 2x4 SPF-W Mill #2 2x4 KD HF Mill #2 2x4 Grn DF Prtlnd Lbr Composite 7/16 OSB SE

Wk 26 430 315 355 355 364 235

Wk 25 425 315 365 350 364 235

6x10 LUMBER HISTORICALS (+/-)Current vs 10-yr Ave Current 10-yr-6-wk ave 10-yr/6-wk Hi 10-yr/6-wk Lo

SYP SPF-W 122 42 430 315 308 274 426 355 225 170

Wk 24 425 315 370 350 365 240

Last Yr. 375 300 335 345 339 185

HF 69 355 286 370 190

GDF 91 355 264 360 160

Current vs Last Year 55 15 20 10 25 50

OSB 56 235 179 255 140

Next 6 weeks / last 10 years 300 combined weeks SYP, SPF, HF, GDF, & OSB

Week # % UP Weeks % DOWN Weeks % UNCHANGED Weeks Total Up Weeks Total Down Weeks Total Unchanged Weeks Ave 6-wk Price Change

27 35% 36% 30% 104 107 91 (5)

26 37 36 28 110 108 84 (4)

25 37 34 30 111 101 91 (2)

24 34 35 31 103 106 94 (3)

MILL ORDER FILES: Sales/Production Ratios % LUMBER 3wk wk Ave 25 97 97 Sales=Production

wk wk 24 23 97 97 at 100%

OSB 3wk wk Ave 25 88 90 Sales=Production

wk wk 24 23 90 85 at 100%

HOUSING TRENDS

(realtor.org) N.A.R. Seasonally Adjusted EXISTING HOME SALES Months Supply Median Price Existing (census.gov) U.S. Census Seasonally Adjusted NEW HOME SALES Months Supply Median Price New U.S. Census Seasonally Adjusted HOUSING STARTS Single Family Multi-Family U.S. Census Seasonally Adjusted HOUSING PERMITS Single Family Multi-Family Vacancy Rates Q1'15 Rental Vacancies 7.1% Home Ownership 63.7% (NAHB.org) Feb Housing Market Index 58 Single Family Present 65 SF Next 6-months 64 Shopper Traffic 39

PHONE: 800-289-5627

Mar 5.36 4.6 222.7

Apr 5.43 4.5 232.5

May 5.53 4.4 239.7

May'15 5.29 4.9 228.9

Mar 531 5.8 288.0 Mar 1099 753 346 Mar 1077 725 352 Q2'15 6.8% 63.4% Mar 58 65 61 43

Apr 586 4.7 321.0 Apr 1167 762 405 Apr 1130 741 389 Q3'15 7.3% 63.7% Apr 58 63 62 44

May 551 5.3 290.4 May 1164 764 400 May 1138 726 412 Q4'15 7.0% 63.8% May 58 63 65 44

May,15 507

May'15 1063 746 317 May'15 1266 679 587 Q1'16 7.0% 63.5% May'15 54 58 63 39

June 29, 2016

•Weather: Rain, floods, draught, heat, fires...summer has it all...even sunny days in the eighties. Still, there are more than 14 hours of daylight for contractors to keep their eight hours of daily scheduled work on track. Available daylight over rides loss of afternoon productivity during the hottest part of the day. •Price Summary: For the last several weeks we have been preparing for this week's pre-vacation buying binge. Here it is...just a little bit from a very large swath of the lumber industry's total purchasing power. Look for prices to accelerate next week on this week's upward momentum. • 6-Week Historical Evaluation: The next two weeks are historically pretty good for our lumber market as buyers continue to scramble for 2-3 week needs. Just-in-timers will be out in force as always, and we can expect a more robust, almost panic reaction from just-past-time buyers. •Sales / Production Ratio: Lumber: Through last week, lumber mills had no order file and were not selling production. This week they have sold well in excess of out put, moving off troublesome floor stock, though not building a deep backlog. OSB mills will sell production this week, however at best they will end up with just a few days of order file. •Housing: April new home sales boasted an 88m increase to 619m last month. Now it has adjusted down to 586m taking back 33m home sales. ABSURD! That is why we should be skeptical of May's 551m. Though down 6% it is still well above March's 531m and nearly 10% above May-2015 (507m). Are you confused yet. Note also that the average May selling price declined by $31,000. This stat is becoming most unreliable as an indicator. It is all over the place. •Forecast: July is a month where prices start out strong then fade the latter 2-3 weeks of the month. Price increases are not what we are protecting against, rather delivery, especially along the east coast and southern California. This is peak produce season. If you MUST get urgent truck delivery, be prepared to offer an additional $1 per mile. •Strategy: Avoid inventory outages in July. Plan ahead. Anticipate late month needs based upon increased demand over June and cover them now.

Layman's Lumber Guide...Matt Layman, Publisher Phone or Text: 336-516-6684 Fax: 888-811-6917 Email: matt@laymansguide.org Reprint or distribution is unlawful without permission. www.laymansguide.org

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

July 1st, 2016 #09204 Page #49

Adverti$er

Donâ&#x20AC;&#x2122;t Forget! You Saw it in the

LUMBER FUTURES Technical Analysis Week #26 Wednesday June 29, 2016

Cash 2x4

12-Month Low 12-Month High

315

Jly

Sept

Nov

236.0

241.4

245.4

331.2

335.2

330.4

LBR Futures Last Thrs Close

301.3

311.0

312.7

LBR Futures Last Fri Close

295.5

303.5

305.6

LBR Futures Mon Close

289.3

292.9

299.4

LBR Futures Tues Close

299.3

302.9

305.4

LBR Futures Wed Close

304.1

307.7

310.4

LBR Spread Basis= Cash-Futures Carry=$.030/mbft/day Cash value to futures Futures Last Year

(3.6)

(2.7)

290

291

299

Data taken from trade and statistical services deemed reliable. Basis does not include 1% payment discount terms for futures. Fibonacci Retracements {23.6%, 38.2%, 50%, 61.8%, 76.4%,100%}.

Lumber Futures...Made Simple Over the past five trading days, futures have made a nice move erasing its deep discount to cash. Limit up on Tuesday and an additional $5 boost on Wednesday provided the reversal we expected to support the pre-holiday buying. That said, note the very narrow open and closing ranges over the past five weeks on the top weekly chart. September's daily chart, bottom, has moved close enough to the inside channel. Up side objective is $350, down side target is $280.

Sep16 Lumber(CME)

With 15 Year Seasonal(2001-2015) 340 330 320 310 300 290 280 270 260 250

15 Year Pattern

240 230 220

100 80

15 Year Pattern

60 40

5 Year Pattern

30 Year Pattern 7 20160629

http://www.mrci.com/ (541) 933-5340/(800) 927-7259 e-mail: sales@mrci.com

Futures Graphs are courtesy of Moore Research Center, Eugene, OR. , MRCI.com The contents of this publication are not, nor should be construed as, a solicitation to trade futures. There is a risk of losing your investment when trading commodities. Futures prices are rounded to the nearest dollar. Cash is contract grade #2 2x4 W-SPF. Current spot contract is July 2016. The last trading day, or expiration, is the last trading day before the 16th of the contract month. Forecasts and observations are based upon technical and fundamental criterion at the time of publication and are not offers to buy or sell futures or the cash equivalent. Recommendations and forecasts are the sole opinions of Matt Layman, publisher of Layman's Lumber Guide. Constantly changing market conditions must be considered prior to trading commodities. Reproduction and redistribution of this document is strictly prohibited without permission of the publisher. Layman's Lumber Guide Forecasts Bi-Weekly and Monthly Publications Subscription Rate: $87 one month; $69/month-to-month. Matt Layman, Publisher, PO Box 905, Belmont, NC 28012...Phone:336-516-6684 Fax:888-811-6917 Email: matt@laymansguide.org www.laymansguide.org TWITTER.com/Laymansguide Join Matt Layman on LinkedIn

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

The

JobLine

.com

Careers in the Truss, Wall Panel

and Engineereed Wood Components Industry

JobLine Hiring Zone Job Opportunities Available Candidates

JobLine.com, inc.

The

800-289-JOBS www.thejobline.com

JobLine.com, inc.

July 1st, 2016 #09204 Page #51

The

Lumber Unlimited Jacksonville Florida

JobLine exclusive!

Truss Designer Opportunity Intermediate to Advanced

The JobLine is currently searching for one or more Truss Designers for Lumber Unlimited in Jacksonville, FL.

Tired or working in a cramped office, hot, noisy? How about your own office? Clean, air conditioned / heated, full kitchen, comfy but supportive seating, large L shaped desk, Dell workstations with dual monitors. They encourage people to make it like home. One of the designers we visited had a Lego collection that was huge!

They have been in business over 50 years and need to hire in house truss designers from intermediate to advanced level. They use Alpine but will consider other software experience. Projects are mostly Single Family Custom from 3,000-7,000 SFT. If you have single family skills, currently use Alpine, or if you use another software and are willing to learn Alpine, consider this opportunity. Compensation: $24-30hr. plus overtime. ($55-80k+-) They offer extensive overtime. Relocation assistance available.

Exclusive!

JobLine

Virtual Interview

Available ONLY to Qualified Candidates! Just like being there! Contact: Thomas McAnally twm@thejobline.com | www.thejobline.com 800-289-5627 x1 Job ID: J12796 Click Here do not contact employer directly!

PHONE: 800-289-5627

800-289-JOBS Getting Up Close and Personal at Lumber Unlimited in Jacksonville, Florida!

On June 20, we visited Lumber Unlimited to learn more about their company and why YOU should want to work there! Gladys Watson, the Design Manager, showed us the plant, offices, and other employee areas including their “super kitchen” available for everyone to use. Sometimes they get together for staff lunches, too. Another employee showed us his office with a lot of models, mostly Star Wars vintage. Did I say a lot? You’ve got to see this video! One of the managers, who has been in the industry almost 30 years and there almost 15 years, explained how the company makes an effort to keep people happy. They are flexible, doing as much as possible when you need time to take care of things or if you’re sick. Even though it’s a full service Truss Plant and Builders Supply, I definitely got the feeling that the truss division is a very close family, with the Truss Plant and offices occupying half of their overall (impressive) facility. Business is good, the company is growing, and they have plenty of room to add designers! The offices for designers are on the first floor and administration is upstairs. Although each office is big enough for two designers, there is currently one person in each office with a few waiting for new arrivals. The desks are large, L shaped, with plenty of room to lay out plans if needed. Designer’s equipment includes dual monitor Dell Computers, a chair of your preference (within reason), or as we saw with one designer, a standing height desk and high chair. Unlike most of the truss plants I have visited, the designers’ office is in a modern professional building and not part of the production building. It is clean, air conditioned (and I assume heated but this is Florida), and parking is in an enclosed area. Getting to Lumber Unlimited is easy. The main road from the interstate or loop takes you to within one block of the plant. We went mid morning and there was no traffic. I assume 5:00 pm will be harder, but you may be able to flex your hours to miss the rush. Most of the designers and office staff do not live near the plant, but within a 15-30 minute commute. In that time you can be at the beach, downtown, in the suburbs, or in the country. Housing costs in Jacksonville are very reasonable and there are plenty of leasing opportunities. JobLine is taking our service to a higher level with our new Up Close & Personal pilot program. We have exclusive access to Employer’s facilities, and we interview management as well as employees to find out what it’s like to work there. Best of all, we make a video of the visit, so you can see what it’s like to be there. We ask tough questions. We don’t stop with management, but go behind the scenes and ask employees why they like working there. Our video is available to qualified JobLine candidates, along with the job description, benefits details, hiring policies, local data links, and video links that show the area, things to do, local history, events, and venues, to give a general feel of the big city, small town, or just plain country lifestyle. We can’t do this for all employers yet, but will be rolling out more Exclusive Job Opportunities over the next few months. If you are interested in talking about this position, give me a call or e-mail mail@thejobline.com. To inquire: Job ID: J12796 Click Here

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

JobLine.com, inc.

800-289-JOBS

The

JobLine.com, inc.

The

800-289-JOBS

www.thejobline.com

July 1st, 2016 #09204 Page #52

job opportunities available

Designer - Truss/Panel KY ID: J12813 https://goo.gl/esnjOJ

Truss Designer - MiTek Midwest ID: J12800 https://goo.gl/fYRrv8

Truss Designer DFW Texas area ID: J12815 https://goo.gl/GYUqau

Outside Sales - Truss (w/wo Design) Southwest ID: J12805 https://goo.gl/lzgdHa

Operations Manager - Truss/Wall Panel/Shipping/Maintenance KY ID: J12808 https://goo.gl/yqgibf

1st Shift Floor Supervisor GA J12795 https://goo.gl/rpQpAu Outside Sales - Truss North Carolina J12746 https://goo.gl/m5LhuW Truss Designer Central Texas J12723 https://goo.gl/DvVNB3

Truss Designer - MiTek Sapphire Truss Designer / Senior Truss South Designer ID: J12804 Southwest J11689 https://goo.gl/HUleva https://goo.gl/yVHt90 We’re here when you need help! Remote Senior Multifamily Truss Senior Truss Designer visit: www.thejobline.com Designer Work from Home Truss Designer &Estimator Truss/Panel/I-Joist/EWP email: mail@thejobline.com ID: J12811 (Panel Too) Southwest or call Thomas McAnally https://goo.gl/EnwnG6 PA J12784 ID: J12777 for Personalized Service https://goo.gl/Ihj3ec https://goo.gl/9VKFJQ STRICTLY CONFIDENTIAL! Truss Designer Candidates seeking jobs: MiTek/Multifamily Outside Sales - Truss/Multifamily Outside Sales - Truss/Multifamily Texas Midwest J10542 theJobLine.com, Inc. Midwest ID: J12812 https://goo.gl/z42sW9 ID: J10542 The JobLine specializes in https://goo.gl/9e2AN0 https://goo.gl/dqffbE recruiting and placing professionals Multifamily Wall Panel Designer in the LBM, Engineered Wood Truss Designer Midwest J11691 EWP Designer Products, Truss, Wall Panel, and Central US https://goo.gl/amwShz Mid-Atlantic Modular industries. ID: J12814 ID: J12757 Truss & Wall Panel Design https://goo.gl/lyMUIZ A s t h e C a n d i d a t e ’ s https://goo.gl/2iysw8 Manager intermediary, our process is unique, Senior Truss Designer KY/IN/OH area (Confidential) Production Manager - Truss doesn’t require a resume, and only Truss/Panel J12782 South/Southwest presents a you to an employer TN https://goo.gl/D5JUOs ID: J12752 if you approve. All you need to ID: J12803 https://goo.gl/ktSHng do is create a JobLine Candidate https://goo.gl/RlRF1K Production Manager - Truss Profile. It’s easy and on line. Just South/Southwest J12786 Designer/Assistant Manager click on the New Candidate tab Truss Estimator https://goo.gl/Be1cYn South J12799 at the top of the page. Take your MiTek Sapphire https://goo.gl/cJq8ag time and be thorough. It’s a tool Northern California Technical Outside Sales for your future! You can create, ID: J12810 & Truss Design Truss Designer save, and update at any time. https://goo.gl/6a7nA1 Southwest J12785 Colorado J12798 You can also specify your job, https://goo.gl/VUJg5R https://goo.gl/qui3do location, and compensation goals. Senior Truss Designer Our Recruiters are personally Truss/Panel/I-Joist/EWP Truss Designer - Multifamily/ Production Manager - Truss committed to helping you find Texas South/Southwest J12780 Single family opportunities that fit your goals. ID: J12772 https://goo.gl/x0aWCX Colorado J12792 https://goo.gl/z9JZFG https://goo.gl/FGugxc To register as a

Job Hunting?

New Candidate, visit www.thejobline.com and click on the New Candidates tab. Thomas McAnally Personal Recruiter 800-289-5627 x1 www.thejobline.com PHONE: 800-289-5627

Senior Truss Designer West ID: J12807 https://goo.gl/JkZ2OY

Production Manager Plant Manager - Truss Southeast J12797 https://goo.gl/qMFmTf

1st Shift Production Supervisor Truss Colorado ID: J12802 https://goo.gl/daUty8

Truss Designer Intermediate to Advanced Northeast Florida J12796 https://goo.gl/mLBvdy

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

JobLine.com, inc.

The

800-289-JOBS www.thejobline.com

July 1st, 2016 #09204 Page #53

JobLine

The Hiring Zone - Available Candidates .com, inc. ID: C15825 production and also the warehouse. In the Extensive MiTek/Excel experience. Supervises monthly inventory audits for Plant Manager | Operations Manager | Truss department, I made sure the line had General Manager - Truss what materials they needed to build, usually all truss department materials. Maintains Relocation: USA - Northwest, USA - South for the next days orders. I tried to keep records for all received and processed 20 Years' experience in the industry. them at least one day ahead, unless there quotes. Pre-engineers all plans for difficulty Started in production, worked up to driver, were special orders. I made sure production and profitability. Participates in cost studies production manager, plant manager, quotas were meet. I helped to set budgets for to ensure a correct labor and pricing strategy. operations manager, and finally General the Truss and warehouse, then maintained From the Candidate: I am an overly critical Manager responsible for managing six that budget. In the warehouse, I made sure estimator and my primary role is to make the departments, and location related issues workers were pulling the orders correctly company I work for money. I have quoted along with administering HR policy, payroll, then also loading them correctly on the from cocktail napkins, off cardboard, and the personnel, budget control, and customer truck. I instilled a clean work area ethic in occasional professional engineers plan. I like service. I am a motivated self starter with my employees. I hired, fired and trained the challenge of problem solving and finding P&L experience, and a progressive and all the truss department and warehouse effective building ideas and practices. stable career path who has been with employees. When needed I would get on ID: C11827 the same company for almost 20 years. the production line to help out, give breaks Estimator - Truss/EWP/Lumber/ConI have a strong operations background, or to just have a little fun at doing my old struction and am a hands on manager who is job. Between the two departments I was Relocation: Alabama, Florida, Georgia We’re here when you need help! comfortable estimating and pricing work, responsible for approximately 40 people. Preparing quantity and cost estimates for visit: www.thejobline.com while managing a plant that handles $6-10 Built roof and floor trusses, loose lumber residential and commercial remodeling email: mail@thejobline.com million in volume. I was responsible for packages. projects and some new construction 50+ employees. We used Mitek software or call Thomas McAnally using Sage 100 software, meeting with ID: C11870 to design both roof and floor trusses, and customers to discuss projects and deliver for Personalized Service Senior Designer/Sales - Truss/EWP recently upgraded and trained our staff to R e l o c a t i o n : C o l o r a d o proposals, meeting with subcontractors to STRICTLY CONFIDENTIAL! use Sapphire Management, which improved 30+ years experience. Roof truss design, discuss projects and receive bids, preparing our admin. and design department efficiency Truss Layout, Estimating, Production drawings to be used for estimating purposes by more than 50%. I am proficient with the drawings and supervision Customer Service, using SoftPlan software. Bachelor's Degree Microsoft office suite, Mitek 20/20, Mitek Inside sales. Software: MiTek, Alpine, in Building Construction. Tested 73 on the MBA, Mitek MVP, Sapphire Management, Keymark, AutoCAD, Truswal, Microsoft JLTDSE. Microsoft Server 2012, 2008, and 2003, as Office. JobLine tested Senior Designer. Attention Candidates! ID: C11804 well as SQL, and database management. Is your JobLine Candidate Profile ID: C10132 Sales/Estimating Manager - LGS/CFS My favorite part of being a plant GM was Presentation Ready? Request a Go to Truss Design/Estimating Relocation: Arkansas, Florida, Texas Meeting on-line conference to review your helping employees realize their full potential Relocation: Alberta, USA - ALL States, Highly motivated sales leader with extensive through training and mentoring. current JobLine Candidate Profile. We can Arizona, British Columbia, Canada - experience in the construction industry. show you areas to improve, what’s hurting ID: C15663 Eastern, Colorado, Hawaii, Nevada, New Always performing at a high level of your chances, and how to improve your Truss Production Manager | Truss Plant Mexico, Quebec professionalism and independence, focusing message. The content is still all about you, Manager Truss Estimator/Designer. - Intermediate. on quality, taking care of customers and but with this new tool, we can show you how Relocation: Florida, Mississippi, Missouri, Candidate has 14 years industry experience continuous improvement. LGS/CFS to make it tell your story better. See why Nevada, South Carolina, Tennessee, Texas, and 13 years experience in this position. we say “It’s like having a first interview”. USA - South, USA - Southwest, USA - Products include floor trusses and roof Quality champion, hard-working, loyal and ALL States, Alabama, Arizona, Georgia, trusses. Markets include single family, honest; driven to learn, teach and get better Louisiana, Oregon, Washington single family custom, multi-family, light every day. I started when I was 18 years old in commercial, and agriculture. Primary duties ID: C12414 the yard, building, cutting and loading. include design, layout, optimization, and TheJobLine searches year around for Truss Designer | Wall Panel Designer | Within 6 months I was hired to become a takeoff. Secondary duties include checking candidates that meet our employer ’s All Hats designer. I did a lot of drafting in high- others work, repairs, customer service, requirements. With our state of the art school so when I became a designer it came inside sales, field measurements, software Relocation: Arizona easy to me. I was designing big custom maintenance, training, and filling in for Engineered panel and truss design, website, multiple job board subscriptions, homes for Las Vegas within 6 months. the Design Manager as needed. Software developed material take off for turnkey truss designer testing, and the JobLine Within year one I was promoted to design experience includes MiTek and I am willing build up, worked in coordination with candidate profile, we have the tools to do manager and did that for a year before being to learn new software. Education: High multiple plants and design teams, worked the job right, Guaranteed! asked to become a salesman. One year later I School Graduate and Associates degree closely with material suppliers on take offs I have been doing this for over 23 years. and estimating. accepted a Sales Manager job and did it for in Arch Tech. 7 years until the owner sold the company Compensation desired $60,000: Salary. I've worked for decades in the construction Because of my reputation for Strict in 2004. During that time, I grew sales M o t i v a t i n g f a c t o r s : a d v a n c e m e n t , industry. Not only in new construction, Confidentiality, I am the go-to Recruiter but additions and remodels as well using for our industry. from $2-15M. In 2004 my family (with compensation, benefits, and job security. innovative designs for added value and to my father) opened a truss plant. We grew ID: C10580 drive down cost. In addition to experience Put me on your team and I will show you it to $8M in less than 6 years. In 2011 my Sales/Senior Estimator with MiTek, Wallbuilder and other design how having theJobLine as your “Recruiter dad retired from the market and I went and Estimating Manager software packages, I have extensive manual Down the Hall” can solve your hiring needs. opened my own smaller $2M plant. I sold Truss/Whole House/Framing Package trig/math skills. I use these to back check it to another company in 2014, I worked Relocation: Alabama, Florida, Georgia, questionable loads as well to design from for them until last year and I now work for Mississippi, Tennessee scratch in the field when needed. I have also Burton Lumber. 6 years estimating experience. 4 with written tutorials for the training of others My goal is to make a manufacturing MiTek 20/20 and 2 with eFrame. Markets and checked other designer's work as a operation run efficiently, on time, on budget include Single Family Custom, Tract, Light Design Manager at a Panel Plant. All things or better. I am operations oriented. Point Talk to me today! Commercial and Multi Family. Products being equal, I love working in components me in a direction and I will get the job done. include component framing packages whether designing, cutting, building or 800-289-5627 x1 and total project estimating. Prepares setting components at the site. ID: C15796 twm@thejobline.com hard construction estimates by means of Production Manager - Truss manual and computerized takeoff methods. Relocation: North Carolina, Florida 20 years experience. Oversaw all the Truss See What I can do for You!

800-289-JOBS

Time To Hire?

Attention Employers

Don’t miss the perfect employee!

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

JobLine.com, inc.

The

JobLine.com, inc.

The

800-289-JOBS

Time To Hire? We’re here when you need help! visit: www.thejobline.com

email: mail@thejobline.com or call Thomas McAnally for Personalized Service

STRICTLY CONFIDENTIAL!

Truss/Wall Panel/Management Plan direct & control daily operations of wall panel & floor panel division. I Provided a complete plant layout and directed the installation and start-up of a 2004 PanelPlus wall panel line. Evaluate productions, plan and manage budgets and direct QC inspections. Provided wall panel designer training & developed design, production & quality control guidelines. Oversee the analysis of data and information and report to upper management. Provided Site supervision & training for home builders and framing contractors. Lead the planning, pricing, scheduling, administration, implementation & installation of all products, floor panels, wall panels, roof trusses & building materials. A typical 2 story house w/basement (1600 +/- sq./ft.) would be erected in 2-5 days ready for shingles. 20 years experience including Outside Sales, coordinating Estimating, Sales, Design, Production, Delivery and Administrative functions of the truss plant with builders, engineers, architects, home owners, project managers, contractors and store managers. Established work schedules, created designs, layouts and Cad drawings as needed. Supervised up to 3 designers, including training new designers. Coordinated schedules, manufacturing, delivery, billing and job sign off. Resolved problems including collections as needed. Proficient with MiTek, OptiFrame, and Microsoft Office software. Relocation: AK, BC, ID, MT, OR, CO ID: C11220 Thomas McAnally Personal Recruiter 800-289-5627 x1 www.thejobline.com PHONE: 800-289-5627

800-289-JOBS www.thejobline.com

Hiring Zone - Available Candidates single family, single family custom, multifamily, light commercial, and agriculture. ID: C10580 My volume was varied depending on Sales/Senior Estimator/Estimating Manager - Truss/Whole House/Framing projects. Past carpenter and framer. Has Package an engineering related associates degree/ Relocation: Alabama, Florida, Georgia, drafting Compensation: $45k+ Mississippi, Tennessee ID: C14506 6 years estimating experience. 4 with MiTek 20/20 and 2 with eFrame. Markets EWP Designer | Estimator | Inside Sales include Single Family Custom, Tract, Light Relocation: Virginia Commercial and Multi Family. Products Experienced with AutoCAD, iLevel, TJ include component framing packages Beam, and TJ xPert software to produce and total project estimating. Prepares framing layouts for TrusJoist engineered hard construction estimates by means of wood products. Responsible for working manual and computerized takeoff methods. with builders and retailers to create the Extensive MiTek/Excel experience. most cost effective solution for their project. Supervises monthly inventory audits for Creating quotes from layouts. Calculate all truss department materials. Maintains gravity loads and sizing wood products to records for all received and processed support the load. Understanding the IRC quotes. Pre-engineers all plans for difficulty building code for wood-framed structures. and profitability. Participates in cost studies Explaining structural framing details to to ensure a correct labor and pricing strategy. builders and salespeople. Training other From the Candidate: I am an overly critical designers in load development and design estimator and my primary role is to make the software. company I work for money. I have quoted ID: C13449 from cocktail napkins, off cardboard, and the Truss Designer | Multifamily Truss occasional professional engineers plan. I like Designer | Wall Panel Designer the challenge of problem solving and finding Relocation: North Carolina, South effective building ideas and practices. Carolina ID: C15755 10 Years’ experience wall panel design, Wall Panel Designer 6 years’ experience truss design. Relocation: Colorado Responsibilities included the planning, Wa l l P a n e l D e s i g n e r : A d v a n c e d designing, and construction of structural knowledge in blueprint reading, Poir wall, floor, and roof systems in conjunction proficientcy in Intellibuild Design with the international building codes. Software, PanelBuilder, as well as PlantNet Consulting with the company’s clients, Software, Excellent time management and engineering and architectural professionals. project planning skills, Single family & Researching, analyzing, and utilizing multi-family housing panel design, Used computers to develop solutions to Microsoft Office on a daily basis, Used engineering design problems. Coordinating Microsoft Word on a daily basis. the resolution of engineering issues related Thom’s Notes: This is a rebound experienced to the design. Inspection of various sites for designer looking to return to wall panel quality control. 11 years experience working design. 7 years’ prior experience as a panel in the construction industry. Software: designer. MiTek, Soft Plan, AutoCAD, Word, Excel, OptiFrame. Will work in office or remote.

ID: C10810 Designer/Inside Sales - Truss Relocation: Virginia

ID: C10500 Plant/Location/General Manager-Truss Relocation: California, Colorado, 6 years design experience, 1 inside sales. Florida, Hawaii, New Mexico, Texas, Primary duties: design, layout, optimization, USA - ALL States cutting/production documents, and takeoff. Secondary duties: scheduling, repairs, Truss and Components Plant Manager with customer service, inside sales, and field over 15 years of experience in the truss measurements. Software used: MiTek, industry who is looking to apply knowledge AutoCAD, and CAD - Other. Component gained while continuing to develop and experience includes floor trusses and roof grow within the management sector. trusses. Market experience includes tract, As Plant Manager: Create programs to motivate employees to achieve peak Attention Employers productivity. Hire, train, discipline and We have over 1,000 terminate employees. Order lumber and registered Industry Professionals. all production materiel. Coordinate All Job Searches are not public! weekly production, sales and safety We can search behind the scenes meetings. Research cost on purchasing to find the right candidate for your new equipment. Attended monthly city opportunity. council meetings to ensure codes were See what I can do for you! followed. Oversee development of truss fabrication facility. Ensure compliance Thomas McAnally with Cal OSHA and Dot. Oversee shipping 800-289-5627 x1 and optimize freight costs. Responsible for twm@thejobline.com training leads and supervisors on company Read/Subscribe online at www.componentadvertiser.com

July 1st, 2016 #09204 Page #54 policy’s. Program and operate computerized equipment. Proficient with Microsoft Programs, Excel, Word, Outlook, ERP software Team growth and development through effective feedback and ongoing mentorship Excellent communication skills Experience working with: Metal, Polymer Blends, Components, Finished Product Assembly, Clean Room, etc. Tenacious, Professional, Detail-Oriented, Strong Sense of Urgency Lean Manufacturing Certified, Kaizen Trained, Fork lift Certified ID: C11943 Plant/Production Manager - Truss Relocation: USA - ALL States My experience in the industry is extensive and includes engineering, sales, administration and production. I think it would be easier to list two job descriptions I can’t claim credit for performing, with a caveat, although I never operated a component saw or worked extensively in the maintenance department I had a tremendous success improving aspects of both these areas. I was a hands on owner, even to the extent of developing a 28 hour training course in truss fabrication which potential employees had to pass. I lowered our workers comp x-mod to .58 and kept it there. I lead over 200 individuals and knew each one of them but I did have trouble with the names of their wives and children. I coordinated efforts of every department as if from one customer to another. I read extensively and studied trends in order to develop industry best practices. Customer satisfaction, quality and safety can and must work hand in hand. It is often said, “You can only offer two of the three things customers always want”;and you must choose between Price, Quality or Service. I don’t believe that is a true statement and the entity which can satisfy all three? ....has everyone else wondering how they do what they do! I put together production fabrications team which quadrupled production. I created a sawsystem which could handle 5,000 boards /shift with 7-800 set-ups.(on 1 component saw) I helped develop a fully automated functioning quality control devise for roof trusses which is now patented. I could go on and on about the past so, I will say, I overcame huge obstacles and I met with success. But failures followed those successes I am being honest. I think my best ideas will reflect additional lessons learned following such failure. They be the ones which are suited to improve an envirionment where opportunities currently exist for significant bolstered by an awareness we should always strive for improvement. Whatever we are doing now can in whatever aspect of an operation you turn your attention to can be made better..

Employers! ask about our Available Candidate Newsletter TOP 50 Candidates! FAX: 800-524-4982

JobLine.com, inc.

The

ID: C15796 Production Manager - Truss Relocation: North Carolina 20 years experience. Oversaw all the Truss production and also the warehouse. In the Truss department, I made sure the line had what materials they needed to build, usually for the next days orders. I tried to keep them at least one day ahead, unless there were special orders. I made sure production quotas were meet. I helped to set budgets for the Truss and warehouse, then maintained that budget. In the warehouse, I made sure workers were pulling the orders correctly then also loading them correctly on the truck. I instilled a clean work area ethic in my employees. I hired, fired and trained all the truss department and warehouse employees. When needed I would get on the production line to help out, give breaks or to just have a little fun at doing my old job. Between the two departments I was responsible for approximately 40 people. Built roof and floor trusses, loose lumber packages. ID: C11804 Sales/Estimating Manager - LGS/CFS Relocation: Arkansas, Florida, Texas Highly motivated sales leader with extensive experience in the construction industry. Always performing at a high level of professionalism and independence, focusing on quality, taking care of customers and continuous improvement. LGS/CFS Quality champion, hard-working, loyal and honest; driven to learn, teach and get better every day. ID: C10132 Truss Design/Estimating Relocation: Alberta, USA - ALL States, Arizona, British Columbia, Canada Eastern, Colorado, Hawaii, Nevada, New Mexico, Quebec Truss Estimator/Designer. - Intermediate. Candidate has 14 years industry experience and 13 years experience in this position. Products include floor trusses and roof trusses. Markets include single family, single family custom, multi-family, light commercial, and agriculture. Primary duties include design, layout, optimization, and takeoff. Secondary duties include checking others work, repairs, customer service, inside sales, field measurements, software maintenance, training, and filling in for the Design Manager as needed. Software experience includes MiTek and I am willing to learn new software. Education: High School Graduate and Associates degree in Arch Tech. Compensation desired $60,000: Salary. Motivating factors: advancement, compensation, benefits, and job security. ID: C15663 Truss Production Manager | Truss Plant Manager Relocation: Florida, Mississippi, PHONE: 800-289-5627

800-289-JOBS www.thejobline.com

Available Candidates Missouri, Nevada, South Carolina, every day. Tennessee, Texas, USA - South, USA ID: C10132 Southwest, USA - ALL States, Alabama, Truss Design/Estimating Arizona, Georgia, Louisiana, Oregon, Relocation: Alberta, USA - ALL States, Washington Arizona, British Columbia, Canada I started when I was 18 years old in Eastern, Colorado, Hawaii, Nevada, the yard, building, cutting and loading. New Mexico, Quebec Within 6 months I was hired to become a Truss Estimator/Designer. - Intermediate. designer. I did a lot of drafting in high- Candidate has 14 years industry experience school so when I became a designer it came and 13 years experience in this position. easy to me. I was designing big custom Products include floor trusses and roof homes for Las Vegas within 6 months. trusses. Markets include single family, Within year one I was promoted to design single family custom, multi-family, light manager and did that for a year before being commercial, and agriculture. Primary duties asked to become a salesman. One year later I include design, layout, optimization, and accepted a Sales Manager job and did it for takeoff. Secondary duties include checking 7 years until the owner sold the company others work, repairs, customer service, in 2004. During that time, I grew sales inside sales, field measurements, software from $2-15M. In 2004 my family (with maintenance, training, and filling in for my father) opened a truss plant. We grew the Design Manager as needed. Software it to $8M in less than 6 years. In 2011 my experience includes MiTek and I am willing dad retired from the market and I went and to learn new software. Education: High opened my own smaller $2M plant. I sold School Graduate and Associates degree it to another company in 2014, I worked in Arch Tech. for them until last year and I now work for Compensation desired $60,000: Salary. Burton Lumber. Motivating factors: advancement, My goal is to make a manufacturing compensation, benefits, and job security. operation run efficiently, on time, on budget or better. I am operations oriented. Point ID: C15663 me in a direction and I will get the job done. Truss Production Manager | Truss Plant Manager ID: C15752 Relocation: Florida, Mississippi, Truss Production Supervisor/Foreman | Missouri, Nevada, South Carolina, Second Shift Foreman Tennessee, Texas, USA - South, USA Relocation: Alabama, Arizona, ArkanSouthwest, USA - ALL States, Alabama, sas, California, Colorado, Conneticut, Arizona, Georgia, Louisiana, Oregon, Florida, Georgia, Hawaii, Illinois, Washington Indiana, Kansas, Kentucky, Louisiana, I started when I was 18 years old in Michigan, Minnesota, Mississippi, the yard, building, cutting and loading. Missouri, Montana, Nebraska, Nevada, Within 6 months I was hired to become a North Carolina, North Dakota, Ohio, designer. I did a lot of drafting in highOklahoma, Pennsylvania, South Caroschool so when I became a designer it came lina, South Dakota, Tennessee, Texas, easy to me. I was designing big custom USA - South, USA - Southwest homes for Las Vegas within 6 months. Past 2nd shift foreman/supervisor with Within year one I was promoted to design 10 years experience. Started as a sawyer/ manager and did that for a year before being production coordinator. Organized precut asked to become a salesman. One year later I lumber, stage materials for gantry lines. accepted a Sales Manager job and did it for Was trained on gantry system operation 7 years until the owner sold the company and supervision then moved to second shift in 2004. During that time, I grew sales as supervisor. from $2-15M. In 2004 my family (with F r o m t h e c a n d i d a t e : I ' m my father) opened a truss plant. We grew comfortable with being in a leadership it to $8M in less than 6 years. In 2011 my role. I've had some supervisory experience dad retired from the market and I went and in several different departments. I can handle opened my own smaller $2M plant. I sold multiple areas and do what it takes to get it to another company in 2014, My goal is to make a manufacturing operation run things done. efficiently, on time, on budget or better. I am operations oriented. Point me in a direction ID: C11804 and I will get the job done. Sales/Estimating Manager - LGS/CFS Relocation: Arkansas, Florida, Texas ID: C15752 Highly motivated sales leader with extensive experience in the construction industry. Truss Production Supervisor/Foreman | Always performing at a high level of Second Shift Foreman | Truss Optimizer Trainee professionalism and independence, focusing Relocation: Alabama, Arizona, Arkanon quality, taking care of customers and sas, California, Colorado, Conneticut, continuous improvement. LGS/CFS Florida, Georgia, Hawaii, Illinois, Quality champion, hard-working, loyal and Indiana, Kansas, Kentucky, Louisiana, Michigan, Minnesota, Mississippi, honest; driven to learn, teach and get better Missouri, Montana, Nebraska, Nevada, North Carolina, North Dakota, Ohio, Read/Subscribe online at www.componentadvertiser.com

July 1st, 2016 #09204 Page #55 Oklahoma, Pennsylvania, South Carolina, South Dakota, Tennessee, Texas, USA - South, USA - Southwest Past 2nd shift foreman/supervisor with 10 years experience. Started as a sawyer/ production coordinator. Organized precut lumber, stage materials for gantry lines. Was trained on gantry system operation and supervision then moved to second shift as supervisor. From the candidate: I’m comfortable with being in a leadership role. I’ve had some supervisory experience in several different departments. I can handle multiple areas and do what it takes to get things done. ID: C11870 Senior Designer/Sales - Truss/EWP Relocation: Colorado 30+ years experience. Roof truss design, Truss Layout, Estimating, Production drawings and supervision Customer Service, Inside sales. Software: MiTek, Alpine, Keymark, AutoCAD, Truswal, Microsoft Office. JobLine tested Senior Designer. ID: C12414 Truss Designer | Wall Panel Designer | All Hats Relocation: Arizona Engineered panel and truss design, developed material take off for turnkey build up, worked in coordination with multiple plants and design teams, worked closely with material suppliers on take offs and estimating. I’ve worked for decades in the construction industry. Not only in new construction, but additions and remodels as well using innovative designs for added value and to drive down cost. In addition to experience with MiTek, Wallbuilder and other design software packages, I have extensive manual trig/math skills. I use these to back check questionable loads as well to design from scratch in the field when needed. I have also written tutorials for the training of others and checked other designer’s work as a Design Manager at a Panel Plant. All things being equal, I love working in components whether designing, cutting, building or setting components at the site. ID: C15763 Remote Truss Designer - MiTek, Multifamily Relocation: USA - ALL States Truss Designer with 3 years xperience, Sapphire, AutoCAD, MBA, and some ITW software experience. “Looking to work for a well established truss company as a remote designer in both wall panels and truss design. I want to continue to grow my design skills so that I can be the best designer than I can be. I enjoy the design aspect of the job and look forward to working through projects one day at a time.” Experience with residential, commercial, and multifamily design, w i t h e m p h a s i s o n m u l t i f a m i l y.

FAX: 800-524-4982

M M ACCdverti$er

Th e

omponent OMPONENT

anufacturing ANUFACTURING

Adverti$er dverti$er evite los resbalones y caídas

Don’t Don’t Forget! Forget! You Saw it IN in THE the YOU S AW IT

Safety First!

st July 1th 2016 April 27 ,, 2012 #09204 #05140 Page PAGe #56 #32

Safety Meeting Topics

Los resbalones y las caídas son una de las causas principales de las lesiones que ocurren en el lugar de trabajo. ¿Qué recomiendan los From State Fund CA. expertos como lo más importante para evitar los resbalones y las caídas? Es sencillo... mantenga los pisos limpios, secos y sin obstrucciones. Cuando se trata de medidas de protección contra resbalones y caídas, Slips and falls are a leading cause of workplace injuries. What do nada es más importante que la limpieza y el saneamiento ambiental. experts recommend as the single most important step to take in preventing Cuando usted camine por el área de trabajo, busque derrames, slips and falls? Simple...keep floors clean, dry, and free of obstruction. manchas de grasa o polvo (las harinas y los subproductos máquinas When it comes to safeguards against slips and falls, nothing is more pueden ser altamente resbaladizos). El agua derramada en las cercanías important than good housekeeping. de las fuentes de agua o acarreada al interior por el calzado en los días When you walk through a work area, look for spills, grease spots or lluviosos o de mucha nieve pueden crear un peligro grave. Observe dust (flour and machine byproducts can be highly slippery). Water spilled los alrededores e identifique las áreas mojadas y los objetos en el piso. by drinking fountains or tracked in on wet or snowy days can create a Entonces tómese el tiempo necesario para corregir la situación. Limpie los major hazard. Look around and be aware of wet areas or objects on the derrames peligrosos o coloque conos o letreros de advertencia de peligro. floor. Then take the time to do something about it. Clean up the hazard Las personas pueden caminar sobre superficies sumamente resbaladizas or place cones or hazard signs nearby, warning of the danger. People can si modifican su velocidad y paso, siempre que estén enteradas de las walk on extremely slippery surfaces by modifying their speed and stride, condiciones de peligro. Es la falta de advertencia lo que puede causar los problemas. Un cambio inesperado de una superficie uniforme a una provided they know about superficie resbaladiza eleva la probabilidad the dangerous condition. de un resbalón o caída. It’s the lack of warning that can cause problems. Busque signos de cambios en el piso. An unexpected shift from Los cambios en iluminación y color del piso a smooth to a slick surface pueden ocultar un cambio en la fricción o en heightens the likelihood el ángulo entre dos superficies adyacentes. of a slip or fall. Siempre que sea posible, los encerados y pulidos de pisos deberán cubrir un área Look for signs of completa, extendiéndose hasta los cambios flooring change. Changes existentes en el piso. Elija el calzado de in lighting and floor color acuerdo con la superficie del piso. can conceal a change in friction or angle between Al realizar un trabajo considere la adjacent surfaces. posibilidad de resbalones y caídas. Algunas Wherever possible, tareas, tales como empujar cargas, pueden waxes and polishes requerir que se preste una atención especial should cover an entire a las superficies de pisos antideslizantes o area, extending to natural a la selección cuidadosa del material de las breaks in flooring. Choose suelas y el grabado de las mismas. Para footwear according to algunos trabajos, resulta útil tener una mejor floor surface. iluminación o un refuerzo lateral estable. Los pasamanos, las barandillas y los postes Consider slips and cuidadosamente colocados e instalados falls when you’re doing pueden ayudar a los operadores a apoyarse por sí mismos. Esto reduce a job. Some tasks, such as pushing loads, may require special attention la dependencia en la fricción entre el calzado y el piso, con lo cual se to slip-resistant floor surfaces or carefully selected sole material and reduce el potencial de resbalones. treads. For some jobs, better lighting or a stable brace is helpful. Carefully placed and mounted hand rails, poles or hip bars may help operators brace Los resbalones pueden ocurrir dependiendo de cómo usted camine themselves. This reduces reliance on foot/floor friction, which thereby sobre una superficie. Algunas cosas sencillas que usted puede hacer reduces the potential for slipping. para reducir al mínimo su riesgo de sufrir resbalones y caídas es usar Slips can occur because of how you walk on a surface. Some simple un calzado apropiado; ver bien por dónde camina, dar pasos lentos y things you can do to minimize your chance of slipping and falling would cortos en las áreas donde el potencial de resbalones es elevado y usar be to wear appropriate footwear; watch where you’re going; take slow, los pasamanos en los lugares donde sea posible. short steps where slip potential is high; and use hand holds where possible.

Slips and Falls - Avoid Slip-ups

The evaluations and/or and/or recommendations recommendations are are for for general general guidance guidance only only and and should should not not be be relied relied upon upon for for legal legal compliance compliance purposes. purposes. They The above above evaluations They are are based on the the information information provided discussed. We We do do not not make make any any warranty, warranty, expressed expressed or or based solely solely on provided to to us us and and relate relate only only to to those those conditions conditions specifically specifically discussed. implied, that your workplace is safe or healthful or that it complies with all laws, regulations or standards. implied, that your workplace is safe or healthful or that it complies with all laws, regulations or standards. PHONE: 800-289-5627 Read/Subscribe online at www.componentadvertiser.com FAX: 800-524-4982

PHONE: 800-289-5627

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

Adverti$er

Don’t Forget! You Saw it in the

Calendar of Events

July 1st, 2016 #09204 Page #57

When? | What? | Where? JULY 2016

July 12

Northwest Truss Fabricators Assoc. (NWTFA) 33rd Annual Golf Outing

Mukilteo, WA

July 13 July 20 July 21

Georgia Component Manufacturers Assoc. (GCMA) Chapter Meeting SBCA – Northeast (SBCA–NE) Chapter Meeting SBCA – New York (SBCA–NY) Chapter Meeting

TBA Phone & Internet Phone & Internet

AUGUST 2016 August 2 – 5 August 9 August 10 – 11 August 11 August 18 August 22 – 26

Building Officials Assoc. of Texas (BOAT) Annual Conference Western Component Manufacturers Assoc. (WCMA) 11th Annual Golf Outing Structural Building Components Assoc. (SBCA) Open Quarterly Meeting Wisconsin Truss Manufacturers Assoc. (WTMA) Chapter Meeting and Golf Tournament Alabama Component Manufacturers Assoc. (ACMA) Chapter Meeting World Congress on Timber Engineering (WCTE)

Sugarland, TX Oregon City, OR Providence, RI Elkhorn, WI TBA Vienna, Austria

SEPTEMBER 2016 September 9 September 14 September 14 September 14 – 16 September 14 – 17 September 15 September 28 – 29

Missouri Truss Fabricators Assoc. (MTFA) Chapter Meeting and Golf Tournament Texas Wood Solutions Fair Joint SBCA Arizona and Southern Nevada Chapter Meeting Construction Suppliers Assoc. (CSA) Annual Conference & Expo National Council of Structural Engineers Assoc. (NCSEA) Structural Engineering Summit Truss Manufacturers Assoc. of Texas (TMAT) Chapter Meeting & Golf Tournament Housing Innovation, Vision, and Economics summit (HIVE)

TBA Houston, TX Tolleson, AZ Biloxi, MS Orlando, FL Grand Prairie, TX Los Angeles, CA

OCTOBER 2016 October 4 – 6 October 6 – 7 October 12 October 12 October 13 October 16 – 18 October 17 – 19 October 18 – 21 October 21 – 22 October 25 – 27 October 26 – 28

West Coast Lumber & Building Material Assoc. (WCLBMA) Annual Convention Florida Building Materials Assoc. (FBMA) Gulf Atlantic Building Products Expo Georgia Component Manufacturers Assoc. (GCMA) Chapter Meeting SBCA of the Capital Area (SBCACap) Chapter Meeting Mid-Atlantic Wood Solutions Fair ICC Annual Conference with Building Safety & Design Expo University of Texas Building Professional Institute (BPI) – 4th Central Texas Building Component Manufacturers Conference (BCMC) Northeastern Retail Lumber Assoc. (NRLA) Annual Meeting National Lumber & Building Material Dealers Assoc. (NLBMDA) ProDealer Industry Summit

METALCON

Monterey, CA. Kissimmee, FL TBA Herndon, VA Philadelphia, PA Kansas City, MO Austin, TX Knoxville, TN Lake Placid, NY Charleston, SC Baltimore, MD

NOVEMBER 2016 November 1 – 3 November 2 November 2 – 3 November 5 – 7 November 7 – 9 November 10 – 11 November 17

NAFCD + NBMDA Annual Convention Central Florida Wood Solutions Fair University of Texas Building Professional Institute (BPI) – 4th Brownsville APA – The Engineered Wood Assoc. Annual Meeting Western Building Material Assoc. (WBMA) Annual Convention Mid-America Lumbermens Assoc. (MLA) Fall Fling Annual Meeting Alabama Component Manufacturers Assoc. (ACMA) Chapter Meeting

December 1

Missouri Truss Fabricators Assoc. (MTFA) Chapter Meeting

Chicago, IL Orlando, FL Brownsville, TX Bonita Springs, FL Portland, OR Branson, MO TBA

DECEMBER 2016 Phone & Internet

JANUARY 2017 PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

January 10 – 12 January 16 – 17 January 31

Adverti$er

Don’t Forget! You Saw it in the

NAHB International Builders Show (IBS) Northwestern Lumber Assoc. (NLA) Building Products Expo Northwestern Lumber Assoc. (NLA) Wisconsin Lumber Dealers Convention

July 1st, 2016 #09204 Page #58 Orlando, FL Bloomington, MN Wisconsin Dells, WI

February 2017 February 20 – 21 February 20 – 23

Northwestern Lumber Assoc. (NLA) Iowa Lumber Convention University of Texas Building Professional Institute (BPI) – 17th Houston

March 7 – 8 March 7 – 10 March 27 – 29 March 29 – 30

Northwestern Lumber Assoc. (NLA) Nebraska Lumber Dealers Convention National Frame Building Assoc. (NFBA) 50th Frame Building Expo National Lumber & Building Material Dealers Assoc. (NLBMDA) Legislative Conference INTEX Expo,

April 5 – 6

Atlantic Builders Convention (ABC)

Altoona, IA Houston, TX

MARCH 2017 Kearney, NE Nashville, TN Washington, DC Las Vegas, NV

APRIL 2017 Atlantic City, NJ

JUNE 2017 June 14 – 16

Southern Forest Products Assoc. (SFPA) Forest Products & Machinery Equipment Expo

Atlanta, GA

AUGUST 2017 August 8 – 11

Building Officials Assoc. of Texas (BOAT) Annual Conference

Kerrville, TX

SEPTEMBER 2017 September 24 – 26

ICC Annual Conference with Building Safety & Design Expo

Columbus, OH

Don’t see your event? Increase attendance and participation by listing your industry focused events here! E-mail details and event web-link to Anna@componentadvertiser.org. We can’t guarantee space for all events, but all industry related events will be added on a space available and interest to our reader priority.

theHAINCOMPANY | 6125 Enterprise Drive, Unit 1 & 2 | Diamond Springs, CA 95619 | 530.295.8068 | sales@haincompany.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

Adverti$er

Don’t Forget! You Saw it in the

July 1st, 2016 #09204 Page #59

Rethinking Ways to Encourage Permanent Truss Bracing by Frank Woeste, P.E., Professor Emeritus, Virginia Tech For Component Manufacturers (CMs), it is generally well known that the Registered Design Professional (RDP) is responsible per ANSI/TPI 1 for the design of the permanent bracing system for the wood truss system. However, the issue of responsibility is only the first part of the actual design and installation of a permanent bracing system required to meet the design assumptions given on the individual truss design drawing. The purpose of this article is to suggest the use of the 2015 BCSI Book1 (111 pages) as a tool for providing a practical path for RDPs to complete their bracing design responsibilities. If you haven’t carefully reviewed pages 37–52 on permanent bracing design, you will find 16 tightly-packed pages of details and prescriptive design information for permanent truss bracing.

Reasons to Rethink Permanent Bracing Education Truss bracing has been on my mind since 1972 when I met the late Professor Stan Suddarth at Purdue University. At Purdue, I learned about the importance of both temporary and permanent bracing along with the engineering side of bracing design such as the 2% rule. Starting in 1978, I religiously taught Virginia Tech engineering students about the need for truss bracing and the industry literature that was available at the time. For the past 30 years, we have been developing and offering continuing education for RDPs, truss manufactures and designers, suppliers, and the building code community. The majority of participants have been RDPs. When covering the subject of permanent truss bracing, we were surprised to learn (early on) that a very small percentage of the group was familiar with the historic 2% rule used to design truss bracing. Additionally, few attendees had knowledge of the truss design standard content (now ANSI/TPI 1) and associated bracing documents referenced in our building codes. Naturally, we continued to cover truss bracing theory and demonstrate bracing design calculations in our courses with the goal of impacting permanent-bracing-design practice nationwide. Fast forwarding to our 2015 VT short course, I decided to “pass around” a copy of the BCSI Book as a supplement to my traditional lecture on permanent truss bracing design. About a month later, a Building Official (BO) contacted me and shared the fact that two of his Building Inspectors who attended the course had made notes as to the scope and content of the BCSI Book. After learning that the BCSI Book was available from the SBCA, he immediately purchased copies for his inspection staff to keep in their vehicles for their framing inspection work. In our 2016 short course, I adopted the BCSI Book as a textbook for the two-day program. At the beginning of the permanent bracing unit, I asked the group of 56 engineers and code folks if they had ever seen the book. A couple of truss folks raised their hands. We then spent about 30 minutes on bracing calculations and about 60 minutes on pp. 37–52 of the BCSI Book. The 2015–16 experiences caused me to rethink the implementation of permanent truss bracing at the field level and begin focusing on a “hybrid prescriptive approach” verses the “engineering analysis” design approach.

How the Component Manufacturer (CM) Can Help In presentations on truss bracing, some RDPs have commented that they rarely see the Truss Design Drawings for a project, while others review them but do not prepare a permanent bracing plan. Because of the natural or required interaction between a CM and GC in securing trusses for a project, I believe the CM is in the best position to provide education for their customers on the content of the BCSI Book and how conveniently the book can be used by all parties involved in wood truss construction. A path to the RDP may be though your customer, typically the GC, for the project. An indirect way to educate the RDP on the subject of permanent truss bracing may be to share your knowledge or bracing resources with your customer. 1 Building Component Safety Information 2013 Edition Updated March 2105 published by the Truss Plate Institute (TPI) and Structural Building Components Association (SBCA).

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

Adverti$er

Don’t Forget! You Saw it in the

July 1st, 2016 #09204 Page #60

Rethinking Ways to Encourage Permanent Truss Bracing by Frank Woeste, P.E., Professor Emeritus, Virginia Tech

Some points to consider covering with the GC are:

1. The 2015 IBC referenced standard for wood trusses is ANSI/TPI 12. This document requires the Contractor to have the “Truss Submittal Package” reviewed by the Building Designer prior to installing the trusses. From ANSI/TPI 1–2014 (a free download):

2. Assuming that the RDP does not provide permanent bracing guidelines for a truss package after they have reviewed and returned the Truss Design Drawings (TDDs), the Builder Designer/RDP for a wood truss project has not met the permanent bracing design responsibility defined by IBC referenced standard per ANSI/TPI 1–2014, Section 2.3.3.1.3. 3. ANSI/TPI 1–2014 addresses the case wherein a permanent bracing plan has not been provided:

4. A presentation of ANSI/TPI 1, Section 2.3.3.2, could open the door to presenting the content of the BCSI Book. CM customers can be encouraged to understand the importance of truss bracing (topics to help with that task will be listed shortly). The CM can also encourage the GC to provide BCSI permanent bracing information and details to the RDP for their potential use in preparing permanent bracing designs for their projects. 5. Truss Bracing Background • The purpose of permanent truss bracing is to satisfy the design assumptions of the truss designer such that the truss system will safely support design loads through the design life of the structure. Early truss industry temporary bracing recommendations (DSB-89)3 were based on an assumed dead loading of about 5–10 psf based on the truss span, whereas the truss design total load (gravity) commonly varies from 40–60 psf. • The dramatic difference in assumed load levels acting during truss installation verses in-service loading is helpful in understanding that the bracing needed for a “safe installation” is only the first part of a complete truss system that will satisfy the design assumptions of the truss designer/engineer. • 2015 BCSI, pp. 1–36, provides background, data, and recommendations for the “safe installation” of trusses spaced up to 2-ft. on-center and up to 80-ft in length. After a quick review of these 36 pages, some GCs may be surprised by the extent of the information and then entertain the book as a “check-it-out item” for their truss installation sub-contractors. 2 http://www.tpinst.org/technical-downloads 3 DSB-89: Recommended Design Specification for Temporary Bracing of Metal Plate Connected Wood Trusses published by the Truss Plate Institute (TPI). PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

Adverti$er

Don’t Forget! You Saw it in the

July 1st, 2016 #09204 Page #61

Rethinking Ways to Encourage Permanent Truss Bracing by Frank Woeste, P.E., Professor Emeritus, Virginia Tech

6. BCSI–B3 Discussion Topics—Permanent Bracing for Chords and Webs a) In the interest of time, only the “high points” can be covered to generate interest in the scope of the book. It may be instructive to review the bottom paragraph of the 2nd column on page 37: “As defined in many engineering laws and building codes, the Builder Designer is responsible for the overall design and flow of Loads through the building. This includes…” It can be quickly noted that, for most commerical projects involving an Architect or Structural Engineer (RDP), the roof truss bracing system design/specifications is not the responsiblility of the Contractor per ANSI/TPI 1–2015, Section 2.3.4.10. b) As you page through the book with your customer, I believe some will be fascinated by the extent of information and bracing details available for consideration and possble use by the RDP for a project. c) Turning to page 41 on Web Member Permanent Bracing, you will find a discussion about the importance of Diagonal Braces (DBs) and Continuous Lateral Restraints (CLRs). Figure B3–11 then depicts CLRs in green, DBs in red. A note in two locations on page 41 states: “Repeat Diagonal Bracing every 20’ or as specified. Closer spacing may be required by the Building Designer.” d) A similar note is given in other locations of BCSI–B3 and it points to the fact that industry and enginering experts can only publish an upper limit on the DB spacing—not the actual spacing that might be required due to the design level of axial compression in a web or chord (typically produced by a design snow load combination). e) Returning to the case where the RDP does not provide a permanent bracing design for a truss package after it has been reviewed and returned to the CM, the GC must understand the RDP has not provided a definitive specification on the required DB spacing for the roof truss installation as required by the building code and TPI 1 (because BCSI–B3 defers the issue of DB spacing to the RDP). f) This discussion leads me to an “a-ha moment”—if the RDP for the project was advised about the availability of the BCSI Book and introduced to the permanent bracing content, would it be unreasonably burdensome to ask the RDP to: •

Consider the BCSI Book as an industry standard for permanent bracing and possibly adopt it for a specific project,

•

Make notes in the book as to what is needed in terms of DB spacing(s),

•

Note any other additional permanent bracing requirements for the project,

•

Sign, seal, and add their professional work to the Construction Documents? A Call to Action

This article suggests the idea that CMs should become more proactive in the education of their customers with respect to permanent bracing resources and the same information can be shared with the RDP for their specific project. The issue of permanent bracing design and installation is present for every truss installation based on the assumptions, bracing requirements, and information given on the truss design drawings. The natural link between the CM, GC, and RDP is the only link that I can identify whereby permanent bracing education by one party could be reliably shared with the other parties. Additionally, the CM could meet with local code departments and design professionals and provide a copy of the BCSI Book. By this article, I challenge CMs and truss industry leaders to consider the current permanent bracing practices in the field and suggest other proactive ideas to establish a reliable path for sharing permanent bracing design resources with the GC and ultimately the RDP. Letters to the Editor should be sent to the Editor (Anna Stamm, e-mail: anna@componentadvertiser.org). The author welcomes comments and can be contacted by e-mail: fwoeste@vt.edu. PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

Adverti$er

Don’t Forget! You Saw it in the

July 1st, 2016 #09204 Page #62

Continuous Improvement Success is achieved, not from the program, but from the mind-set By Ben Hershey, 4Ward Consulting Group, LLC

Theory of Constraints. The Houlihan Labor Method. Quick Response Manufacturing. Six Sigma. Lean. Total Productive Maintenance. Total Quality Management. The lexicon, tools, and methods around improving manufacturing seems endless these days. A quick search for texts on the subject reveals some impressive numbers – more than 25,000 books are available. The continuous improvement community makes it more complicated than it really needs to be, sometimes to the point of confusing and frustrating those very people we are trying to help. Don’t get me wrong, I have used several of the methods listed above in some application as they have their place in my operations and manufacturing heart. Since the component industry version of The Houlihan Labor method started in Imperial Components back in the late 1960s, I learned the importance of improvement and I am very familiar with its concepts. Don Hershey brought John Houlihan into his and Dave Chambers’ operation to improve productivity and find a method of tracking labor from pricing through the production process. But if you are going to align your component or lumber operation and stick to a method, then you need this concept of continuous improvement to be easy and fun, not complicated and by the book. And one method is not the “be all end all,” so anyone trying to force you into one method is wrong. Over the years I have found that, in its simplest form of focusing on improving one of the following five things while making sure not to worsen the other four, you can turn continuous improvement into something that anyone at any level of the organization can easily understand and implement.

Simpler We have all heard the saying KISS, “keep it simple, stupid.” By reviewing the processes we use, from quote to delivery, we make a task simpler for the associate, so the net result is less labor time and therefore less cost for the company. Simpler can also mean a review of the ergonomics, health, and safety of a task on our associates. There are countless benefits in this area: the less burden on the associate, the better they are at performing the task/process, the higher the quality and the more productive they will be. This can be in our lumber yards, component manufacturing floors, the office – the entire operation.

Outshine We advocate quality control, use programs such as SBCA QC and TPI third-party inspections, but are we always looking for ways to make our product better? Outshine can come from changing a component, material used, features, assembly, or packaging process. Having grown up in the industry and seeing many of the innovative ideas first hand, I know we have come a long way. But look at other industries and how much more they have embraced innovation, automation, technology. I think we can agree that we still have room to improve and outshine. Companies struggle with this because of the cost of technology and innovation and the difficulty of integrating it into your long-term strategy, etc. But, if spending dimes and adding this to your COGS will save dollars, could you not outshine your competitor or leap-frog the technology hurdle? Keep in mind though, making a Rolls-Royce wall component or truss when all you need is the Chrysler 300 (or Ford F150 for us truck enthusiasts) is not necessarily “outshine,” particularly if you are not meeting customer expectations.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

Adverti$er

Don’t Forget! You Saw it in the

July 1st, 2016 #09204 Page #63

Faster

“Time is Money” and “Work Smarter Not Harder.” How many times have you heard these phrases in your life? Unless you have an operation that is completely automated including robotics, the majority of your expense comes from direct and indirect labor in component and lumber operations. Whether you are putting a lumber package together for your truck or, as is the case in our manufacturing operations, processing raw material to produce a component, every improvement you make really is money to your bottom line. No improvement is too small, and shaving even seconds off a process will add up to substantial savings for the company. You cannot expect your associates to always work faster just by simply increasing their effort; it is not sustainable physically or mentally. Anyone can say, I’ll save you 3-6%, but can they coach/train these best practices with your team and sustain these savings? The processes we use need to become easier, allowing them to work faster. That may not seem achievable in a component plant where you are “swinging a hammer” or moving lumber from one place to another. Coaching/Training best practices for each process will produce the needed productivity gains that will drop to your bottom line.

Savings

Focusing on COGS and the various components that make up our costs is always a good thing. There are a number of ways you can do this in your operation; it can come from labor cost, raw material savings, inventory turns, etc. While reducing costs and increasing savings is always good, don’t make the mistake of reducing the quality of the product you produce or distribute. Your customer, the framer/builder, may want you to focus on reducing the price of your bid, but they did not ask you to reduce the quality of what you deliver. You get what you pay for. Always review savings with a mind-set/look at what the implications would be for the company and your customer.

Safety It should go without saying we never want to jeopardize the safety of our associates. Everyone should have the expectation that, when they come to work and then leave, they return home without injury. If a change in process makes working conditions unsafe for your team, it is not worth the continuous improvement gain. I had a client who used some but not all of our guidelines for marking/lining out/painting the floor. The unintentional result was that employees were moving carts through the area and subconsciously thinking it was a race track because it was painted green. While they had improvements, they also had a few injuries. Fortunately the floor is now painted with the caution colors they should have used and they have not had another injury. This is a good reminder that we need our people assets as much as we need our automated machines, and there are also benefits you can use from the SBCA Safety Program. So while you may be thinking that the terms here seem simplistic, remember it really is a mind-set for your entire team. There are several Continuous Improvement programs out there, but, before you start any of them, make sure your team at least aligns with these five things —simpler, outshine, faster, savings, and safety. You’ll be glad that you did. Ben Hershey is the CEO of 4Ward Consulting Group, LLC, the leading provider of Lean Management and Manufacturing Consulting to the Structural Component and Lumber Industry. A Past President of SBCA, he has owned and managed several manufacturing and distribution companies and is Six Sigma Black Belt certified. You can reach Ben at ben@4WardConsult.com or 623-512-6770.

Design of the Day This was a project in downtown San Diego, CA, called Front & Beach. It was a mixed use building with retail on the bottom two floors and then 6 floors of condos/apartments. We had to panelize floor sections and roof sections to increase the speed of framing in the field, and to accommodate the very narrow streets around. Not only was this an engineering challenge for us, but it also was a logistical challenge as we had to coordinate trucks with cranes. You could have no more than one truck lined up on the street since there was only one crane to accommodate the truck. There was a lot of time in this project since no one had done this in SD at the time.

Photo courtesy of Ben Hershey, Then CEO at Imperial Components, Glendale, AZ

Send us your submissions for a future issue of The Advertiser! PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

Adverti$er

Don’t Forget! You Saw it in the

July 1st, 2016 #09204 Page #64

News & Announcements

Simpson Strong-Tie Employees Participate in Habitat for Humanity's Global Village Program in Portugal Pleasanton, Calif. – Simpson Strong-Tie, the industry leader in engineered structural connectors and building solutions, joined forces with Habitat for Humanity to send five company employees to help with a week-long Global Village build in the town of Amarante, Portugal, this past April.

The group of employees was originally scheduled to work on a Habitat project in Nepal late last year as part of Habitat’s Jimmy and Rosalynn Carter Work Project, but due to signing of a new constitution and civil unrest in the country, the project was canceled. As of result, the company reallocated the funds to Habitat’s Global Village Program, allowing these employees to help renovate and remodel the older home of a widowed mother and daughter living in the countryside of northern Portugal. The group, along with five other volunteers from the U.S., was the first to start work on the 30-plus year-old home. They spent the week completing a number of renovations, including cutting two new doorways into the granite walls, leveling out the floors, blocking and replacing two doorways, removing paint and concrete from the granite, removing a wood stove pipe, patching holes and other openings, and digging a ditch for the waste lines. “One of the core principles of our company founder Barc Simpson is our responsibility as a company and as individuals to give back to those less fortunate,” said Simpson Strong-Tie CEO Karen Colonias. “It is a privilege to have our employees live out this core value and help those in need all across the world.”

New, Award-Winning Strong-Wall® Wood Shearwall Provides Easier Installation and Inspection Simpson Strong-Tie now offers a redesigned prefabricated wood shearwall that provides greater installation flexibility for contractors and additional design options for specifiers. The Strong-Wall® Wood Shearwall features a holdown with visible front, back and side access that makes it easier to install the anchorage attachment in various framing conditions. The front access opening also allows for easy inspection of the connection to the anchor bolt. The wood shearwall can be trimmed and drilled in the field, providing additional flexibility, and a simpler top-of-wall connection provides options for a one- or two-sided plate solution. The wood shearwall is code listed (ICC-ES ESR-2652 and City of L.A. RR 25730 evaluated to the 2015 IRC/IBC) and allows for the same or higher loads than the previous SB shearwall in both seismic and wind applications. The Strong-Wall Wood Shearwall replaces the Strong-Wall® SB shearwall and can be used in the same applications, including residential, multistory, and light-frame commercial wood structures. Simpson Strong-Tie featured its innovative, award-winning Strong-Wall Wood Shearwall during the Pacific Coast Builders Convention (PCBC) at the Moscone Center in San Francisco on June 22-23. The product was one of only 20 selected to win a 2016 Parade of Products PCBC award, given by the California Building Industry Association for the top products representing the best in innovation and new product solutions. View the catalog to learn more and watch our on-demand best practices shearwall webinar.

Simpson Strong-Tie is proud to support this project as a national partner of Habitat for Humanity, along with other initiatives including Habitat Strong. For more information about the company’s work with Habitat, visit strongtie.com/about/habitat PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er

Th e

omponent

anufacturing

Adverti$er

Don’t Forget! You Saw it in the

News & Announcements

July 1st, 2016 #09204 Page #65

The Last Word...

PO BOX 130 ALDA NE 68810

PRESS RELEASE New Triad/Ruvo Sales Manager Alda, NE---Dan Mowers, General Manager of Merrick Machine Company has named Lowell Tuma as the National Sales Manager of Triad/Ruvo. Triad manufactures wall panel equipment for wood/steel framing and stair equipment along with Ruvo providing millwork and pre-hung door equipment to the construction industry. “With the addition of Lowell’s vast knowledge and past experience in the industry and the well balanced team for support, Triad/Ruvo is excited to continue broadening our equipment line while serving the needs of our customers through our independent sales organization led by Lowell” said Mowers.

Too Many Touches?

Joe Kannapell - Senior VP MiTek Industries, Inc. www.mii.com

“The least number of touches,” says B. J. Louws, “equals the least cost.” That’s what he learned by careful study of his truss plant operations, and by continual experimentation to increase efficiency. B.J.’s strategy, which has enabled Louws Truss to become a leading CM in the competitive Northwest, is a great metaphor for all truss operations. How many people touch a stick of lumber – offloading from trailer, moving inside the plant, distributing to saws, cutting, catching, merging and bringing to table, and setting in jig? B.J. is working toward a maximum of two touches.

Lowell previously worked for Merrick Machine from 2001 through 2011 in machinery sales. He began his career at Merrick as the Assistant Sales Manager and was quickly promoted to National Sales Manager. In 2011 Lowell relocated his family to California and became an independent sales representative for Merrick Machine. “Merrick Machine is constantly developing new innovative ideas for the industry and revolutionizing the way equipment is built.” stated Tuma. “I am proud to lead this team and together we are excited to roll up our sleeves and continue to push Triad/Ruvo forward.”

For 55 years Triad has been the leading manufacturer of automated, semi-automated and manual wall panel equipment, sub-component and floor building equipment as well as the fully-automated CNC controlled Stair Boss, and revolutionary Open Stringer Saw (OSS). No matter if you are a high volume, or low volume operation, Triad has the experience you need and the right answers to help you grow. For questions please feel free to call 800-568-7423 (ext. 126).

How many designers touch a set of plans – walls, engineered wood, and trusses? How much effort is duplicated in learning the plan, inputting it, checking it, and coordinating among three individuals? At Structural, Inc. in Metro DC, Scott Austin dedicates one person to design all of the floors, roofs, and walls in a project. How many people touch the cutting – batcher, component saw, linear saw, and pull saw? How much labor is lost in storing, retrieving, and combining their output? More plants, like John Miller’s Tri-State Components in North Carolina, are cutting everything on a single MiTek Blade saw adjacent to the truss table. Each “touch” adds to the risk of error, and adds to the labor cost and overhead. By moving away from a “touchy feely” plant, Louws Truss leads the charge to become untouchable!

Contact: Michael Addy mikea@merrickmachine.com

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

LESS LEARNING CURVE, MORE LEARNING TOOLS. THERE ARE OVER 130 FREE ONLINE MITEK UNIVERSITY COURSES. Enroll your designers and production team in MiTek University, our FREE structured online learning platform for team members of every skill level. These self-paced tutorials give them and your company a valuable edge when working in SAPPHIRE™ software and MiTek machinery.

• Visit our Technical Resources page to explore our entire catalogue of over 1,000 SAPPHIRE videos. Increase your competitive advantage and improve your bottom line by enrolling at MiTek-US.com/MiTekU. Page 66

Component Manufacturing Advertiser

July 1st, 2016