A #
313
The
August 2025 #17313
Component Manufacturing dverti$ dverti $ er
Serving the Structural Building Components Industry
“Celebrating Growth at Element Equipment” Cover story on page 77
Booth: 1501
A
The
Component Manufacturing dverti$ dverti $ er
Serving the Structural Building Components Industry
Inside
Articles 6 Anna Stamm – Advertiser Forum: Bringing Order to Chaos 10 Joe Kannapell: Home Building Technology, Part VIII The Engineering Advantage 17 Wendy Boyd – Spida Machinery: Automation on the Factory Floor 26 Todd Drummond Consulting, LLC: Lean Manufacturing Only Works with the Best Employee Management Practices 33 Glenn Traylor: What are Your Options to Address Member-to-Member Gaps? 40 Leonard Hain – The Hain Company: Improve Your Efficiency with a Hain Sub Component Nailer 46 Ed Lim – LimTek Solutions: “OBBB” and “AII” Inspiration to Feed the Beast! 52 Ben Hershey – 4Ward Solutions Group: What a Flight on Japan Airlines Taught Me About Visual Safety Culture 59 Simpson Strong-Tie: Simpson Strong-Tie’s Saw Line-up at BCMC 64 Dario Schmidt – Stiles Machinery: Future-Proofing Off-Site Construction: Why Flexibility is Key in the Age of Value-Added Manufacturing
70 Kathryn Pedde – JAX, The Wood Retriever: Continuous Improvement with JAX 77 Marco Gagnon – Element Equipment: Celebrating Growth at Element Equipment 83 Carl Villella – Acceptance Leasing: Strategic Capital Investment: Leveraging Section 179 Expansion and Multi-Entity Structures in the Building Component Manufacturing Industry Post-OBBBA 92 Lesko Financial Services Team: Economic Outlook: Resilience and Uncertainty The
98 Thomas McAnally – JobLine: Designer Hiring Blues in the Summer 104 Geordie Secord – Design Connections: Onboarding Designers: What They Really Need to Know 111 Jay P. Jones, P.E. – Truss Plate Institute: Development Begins on ANSI/TPI 2 and ANSI/TPI 3 for the Truss Industry 116 MiTek Staff: Bringing Innovation to the Forefront of the Construction Industry 124 Paul McEntee – Simpson Strong-Tie: Fastener Substitutions in Connectors Where We Started and Where We Are 176 Joe Kannapell – The Last Word: Finding Your Place in a Great Industry
A
The
Component Manufacturing dverti$ dverti $ er
Advertisers
Sections
Serving the Structural Building Components Industry
Inside
New & Used Equipment Saws ................................................................................................7 .......................................................................75 Truss Equipment Panel Equipment ..........................................................................106 Trucks & Trailers ...........................................................................133 Misc. Equipment ...........................................................................138 Door | Stair | Window Equipment ................................................143 Safety First ............................................................................................147 Calendar of Events ...............................................................................148 TheJobLine - Jobs & Candidates .........................................................151 Industry News .........................................................................................156 Directory .................................................................................................171 Hiring-Zone - Jobs & Subcontractors ..................................................174 4Ward Solutions Group ............................................................. 52,149,178 Acceptance Leasing & Financing ................................................... 29,81,83 Acer, Inc ............................................................................................ 50,130 All Points Technical ............................................................................. 9,109 Alpine ................................................................................................... 22,60 BuyMetrics .......................................................................................... 49,81 Clark Industries, Inc. ............................................................................. 8,90 Eagle Metal Products ........................................................................ 28,132 Eide Machinery Sales, Inc. ................................................................... 30,78 Element Equipment ...................................................................... 1,42,76,77 Fitzgerald Group ............................................................................... 67,115 Hiring-Zone ............................................................................ 73,86,97,145 HOLTEC USA .................................................................................... 13,82 Hundegger USA ................................................................................ 44,100 JAX, The Wood Retriever ................................................................. 48,70 LimTek Solutions ............................................................................ 24,46,66 MiTek ......................................................................................... 12,116,175 Panels Plus ....................................................................................... 112,115 Paragon ................................................................................................. 36,68 Precision Equipment .................................................... 23,39,63,67,133,135 ROGworx Automation .......................................................................... 15,56 Simpson Strong-Tie .......................................................... 14,58,59,124,165 Spida USA ................................................................... 16,17,54,96,122 Stiles Machinery .............................................................................. 38,64,94 The Hain Company ................................................................ 9,37,40,61,140 The JobLine .........................23,79,81,97,98,99,101,103,104,137,140,141,151 Timber Products Inspection ........................................................ 32,150 Todd Drummond Consulting, LLC ...................................................... 25,26 Triad | RUVO | Merrick Machine .......................................... 2,128,138,144 Truss Builder Parts ............................................................................. 37,109 Vekta Automation ................................................................................... 4,74 Wasserman & Associates ....... 7,23,45,51,57,75,87,88,91,101,103,106,107, 115,121,123,131,133,136,139,141,142,143 West Fraser ................................................................................. 35,102,160 Wolf X Machina ...................................................................................... 145 Wood Tech Systems ..................29,31,39,43,45,51,55,61,62,63,67,69,72,73, 75,89,91,95,97,101,110,113,120,127,129,131,143,145,146
Published Monthly Publisher Thomas McAnally twm@componentadvertiser.org
Editor Anna L. Stamm 800-289-5627 x 3 anna@componentadvertiser.org
Distributed FREE Via e-mail subscription Download PDF or Read on line at www.componentadvertiser.com News of Interest and Advertising inquiries can be submitted to: anna@componentadvertiser.org An Open Forum for many sources. Deadline 20th of each month. Articles, Trade Names, and Logos are the property of their respective owner or creator unless otherwise noted Disclaimer: We reserve the right to refuse any advertisement or material that we deem not in the interest of the industry or the Advertiser. Permission to use content is the responsibility of the contributor including permissions to use any likeness of persons. The Advertiser is provided “As Is” including typographical errors, omissions, and mistakes both intentional and unintentional.
Believe it at your own risk! Copyright 2008-2025
Component Manufacturing Advertiser The
Advertiser
7586 Becks Grove Road Freetown, Indiana 47235
no reproduction in whole or in part without permission from the component manufacturing advertiser Archive Copies Available On Line www.componentadvertiser.com
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
Advertiser Forum
August 2025 #17313 Page #6
Bringing Order to Chaos Anna L. Stamm Director of Communications and Marketing Component Manufacturing Advertiser.
C
all me smart or call me obsessive, I like to create rules for things. If we take a kinder, gentler tone, we can call them standard operating procedures, but they’re rules. Sometimes, they may seem excessive, but they accomplish the mission of bringing order to would-be chaos and making life a little more predictable.
Writing the Rules In the workplace especially, it makes sense to establish procedures that maximize efficiency and productivity. In the plant or in the office, we have rules to help us conduct business in ways that maximize good outcomes and minimize bad outcomes with the least amount of time and resources expended. Often, the reasoning behind rules is relatively obvious, but there will always be a few we follow even though we’re not sure how they’re the best option. At home, the situation is a little different. Our mental calculations don’t necessarily involve as many cost/benefit analyses. We don’t necessarily think in terms of expending resources of time and effort. Even so, we all establish rules, big and small, to help us function more efficiently – even when, to outsiders, the rules may seem odd. As a silly example, I’ll ask this – have you ever had someone put the milk back on the wrong shelf? Sure, there was plenty of space on the top shelf and it looked like the milk could belong there, and yet you had to move it when you saw how wrong it was. Your helpful guest who returned the milk to the fridge didn’t know about the time you put the milk on that shelf and it froze just a little, so it got weird and chunky and you decided that you would keep the milk on the bottom shelf only. It makes sense when you know the entire explanation – and it’s not such a crazy rule after all.
Breaking the Rules Many people talk about wanting to break the rules, but I maintain – you should at least try to know why a rule exists before you decide to break it. Maybe it is arbitrary, and stupid, and not the best option. But maybe, the rule really is a good attempt at bringing a little bit of order to the looming chaos of our daily lives.
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
August 2025 #17313 Page #7
Adverti$$er
NEW SAWS! NEW!
NEW!
NEW! Monet DeSauw DeRobo Linear Saw
Monet DeSauw FWA 500 Floor Web Cutter • • • • • •
• • • • • • • •
Push Button Powered Blade Angulations Single Push Button Setting for 2 Blades per Side Electronic Digital Readouts Backup Mechanical Indicators Cuts 4 Angle Webs, Cantilever Webs (2 piece webs) & Square Blocks Magazine Lumber Feed for 3x2, 4x2 and 6x2 Lumber 12 1/2” to 48 1/2” Length Capacity (7” Minimum on Square Blocks) 60 Pieces per Minute (4) Internal 16” Blades & (1) External 16” Cut-Off Blade Pneumatic Blade Brake on External Blade Dust Hoods Belt Waste Conveyor (under saw) Add $4,300 for 12’ Incline Waste Conveyor (adjacent to saw) Add $2,100 for Extra Set of Blades 480 Volt / 3 Phase FOBMO Call For Pricing
•
• • • • • • • • • • • • •
Automated (Truss Design Software Download) or SemiAutomated (Touch Screen Entry) Operation All Movements are Computer & PLC Controlled Comprehensive Setup Screens Display Each Piece with Setup Data 22” x 40 Tooth Blade on PAE Cut 1 or 2 Boards up to 20’ (2 Second Plunge Cut) Cut Chords, Webs, Rafters, Wedges & Stair Stringers Cut Long Scarfs by MultiPlunging Servo Positioning on Infeed, Angle & Outfeed Pusher Over Travel Protection Ink Jet Printer Lumber Optimization Program Belt Waste Conveyor 480 Volt / 3 Phase / 60 Amp Includes 5 Day Onsite Installation & Training Optional Monet DeSauw Live Deck, Bunk Feeder & Incline Belt Waste Conveyor FOB MO
Call For Pricing
Monet DeSauw DeSawyer 2000 Automated Saw • • • • • • • • • • • • • • • • •
Touch Screen User Interface with Backup Mechanical Controls 3 Operating Modes: Auto, SemiAuto & Manual All 20 Axes of Movements are Computer & PLC Controlled Comprehensive Setup Screens Display Each Piece with Setup Data Anti-Collision & Optimizing Programming Auto Calibration Productivity & Time Tracking Maintenance Diagnostics Variable Speed Conveyor (0-50 Flights per Minute)with Powered Hold Downs (1) 30” x 80 Tooth Blade (27 3/4” Scarf on PAE) (4) 16” x 40 Tooth Blades (13 1/2” Scarf on Centerline) Pneumatic Blade Brakes on all 5 Blades 16 1/2” to 20’ Length Capacity (11” Minimum on Square End Blocks) Vibrating Waste Conveyor Under Saw 480 Volt / 3 Phase Includes 4 Day Onsite Installation & Training Add $2,900 for Extra Set of Blades Optional Live Deck, Label Printer, Ink Jet Printer, Catcher Display & Incline Belt Waste Conveyor.
Call For Pricing FOB MO
Buy Factory Direct From Wasserman & Associates at the same price as the Manufacturer, and get the added support and care you need to be up and running FAST! WE’LL EVEN HELP SELL YOUR USED EQUIPMENT TOO!
800-382-0329 | www.wasserman-associates.com PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
CONSIDERING EQUIPMENT? CONSIDER CLARK. EZ-SET AUTO JIGGING EXCLUSIVE & PATENTED DESIGN Automatic Truss Jigging System to drastically reduce setup times. Allows for 100% embedment on the table, with top & bottom chord pucks in the same slot. TopSider or standard configurations available for conventional kick-leg, walk-thru, or our new trackless 8' and 10' continuous table systems. Systems for other roller & hydraulic gantries are coming soon. Available in new machine installations or for retro-fitting your existing table. The TopSider is exclusively applicable for “kick or flip leg” style truss presses such as the Tri-Axis & Lumbermater® Lumbermater® is a registered trademark of Illinois Tool Works, Inc., or ITW.
FEATURES / APPLICATIONS • Capable of 100% On-Table Nail Plate Embedment • Two Pucks Per Slot • 24", 26", and/or 30" Spacing • Compatible with all current major design software • Multiple Simultaneous Layouts LOCAL 417-235-7182 • US TOLL FREE 800-743-9737 WWW.CLARK-IND.COM / GENERAL@CLARK-IND.COM
EQUIPMENT FOR TRUSS & COMPONENT MANUFACTURERS
A
Th e
● ● ●
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
August 2025 #17313 Page #9
Adverti$$er
PlanSwift Lumber & Bldg Mat Takeoffs Truss & Wall Panel Design Staff EWP Layouts and much more!
www.AllPoints.Tech
Dave Walstad - Panama City Beach, FL
Cell - 941-713-4395
Dave.AllPoints@gmail.com
Material Takeoffs Slowing You Down? All Points Can Help You Sell More in 2025! All Points integrates with Epicor’s BisTrack So you can be More Accurate, Faster.
Work Smarter
Sub Component Nailer Speed Up Your Production of wall panels, windows, doors, and other sub components
Block Sizes: 2x4 & 2x6 framing lumber, any length Nail Cycle Time: 1 nail 1 sec; 2 nail 2 sec; 3 nail 3 sec Machine Set Up Time: 1 sec from any prior set up Air Supply: 125 psi at 30 CFM, nothing less Electrical Supply: 120 VAC Frame: 1/4” steel plates mounted to heavy duty roll top tables and 2x2 skids mounted no install Transfer System: Pneumatic transfer for finished sub component assembly Covers: 3/16” thick aluminum Shipping Weight: 1000 lbs including crate Dimensions: Height 48”, Width 48”, Depth 10” MADE IN AMERICA BY AMERICANS See it in Action!
530-295-8068 PHONE: 800-289-5627
sales@thehaincompany.com
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #10
Home Building Technology, Part VIII: The Engineering Advantage By Joe Kannapell
W
here is the best location to start a business — the easiest place or the toughest? Choosing the easiest means you may or may not “have what it takes” to succeed in the toughest markets. But, by choosing the toughest, you may “set yourself up” to market yourself everywhere, as Carol Sanford inadvertently did by clearing Miami’s hurdles. Successfully completing the Miami gauntlet resulted in a superior product, the Grip-Plate, which Sanford could sell almost anywhere.
The advantages of the Grip-Plate were obvious. But, when Sanford began to use that product in the field, he learned he would need superior engineering, too. That Miami required engineering drawings for every truss on every job was unlike any jurisdiction in America. To make matters worse, the complexity of roof framing in Florida, necessitating multiple drawings for a single house, was nothing like what Sanford had experienced in his native Ohio. In the pre-computer days of the 1950s, each of these designs required hand-calculations, manually drafted design drawings, and review by a professional engineer. And because building permits weren’t issued until drawings were approved by the building department, the pressure of meeting construction deadlines bore down on the truss engineer. Yet, because Sanford was an architect by training, and had built and sold houses in Ohio and Florida, he understood what he was up against, and went to work getting ahead of these challenges. At the same time, Sanford knew having the cheapest connector wasn’t enough. He also knew that he needed to have the most efficient lumber design. For example, shown in the top image is a design of his main competitor in 1958, Timber Engineering Company (TECO), that requires a 2x8 top chord for a 38’ truss, whereas Sanford’s, shown in the bottom image, uses a 2x6. In addition, this Sanford drawing specified a 55 lbs. loading, while TECO’s drawing called for only 40 lbs. So even without consideration for assembly labor savings, the Sanford design advantage enabled him to quickly gain the bulk of TECO’s Miami business. However, this would only be the first skirmish in the decades-long battle to produce the least costly engineering. Continued next page
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #11
By 1957, Sanford had secured the additional approval of FHA and VA, the main governmental loan guarantors, and the much stricter Uniform Building Code (UBC), the main regulator for the West Coast. With those approvals in hand, he published his first comprehensive design manual, possibly modeled after TECO’s widely distributed “Typical Designs of Timber Structures.” Besides common residential spans, Sanford included several more complicated structures, such as three-hinged arches and doublecantilevered lumber shed designs, mirroring some of the content of TECO’s manual. This is an impressive work that likely depicts some of the early projects that were built with Grip-Plate connectors, and broadcast to early fabricators the commercial, residential, and agricultural potential for plate-connected wood trusses. In 1958, anticipating the ongoing demand for engineering, Sanford recruited a licensed engineer, Bill McAlpine, whom he allowed to continually expand his staff. Sanford surely sensed that he stirred a giant when he took TECO’s business, since TECO was wholly owned by the nation’s largest lumber manufacturers, and employed a formidable staff of engineers In 1961, TECO responded by publishing a highly professional residential truss design manual and a model for what was to come. Each page contained all the design information for a series of truss spans, without being overly conservative. Apparently, their loss of split-ring connector business informed them that they should market their nail-on plate instead. Yet, without Sanford’s triangular shaped teeth, which were protected by a patent, they still would have been at a considerable disadvantage. Also, by this time, two more competitors with impressive engineering talent were already c h a l l e n g i n g t h e G r i p - P l a t e ’s dominance by marketing even better products. Next Month: The Great Connector
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
SCALE YOUR BUSINESS Get the industry-leading software and automation technology you need to scale your business. Overcome market challenges, boost productivity, and confidently meet demand when you choose MiTek as your solution partner.
Are you ready to scale your success? MII.COM/CM
EVERY CUT COUNT MAXIMUS ® High-Volume Precision Crosscutting with Integrated Package Aligner and Loop Bander
AUTOCUT ®
High-Volume Automated Crosscutting with programmable PLC Controls
SELECUT ®
High-Volume PET and Market Premium Length Crosscutting with Integrated Power Package Squeeze
TRANSCUT ® II SERIES
Portable Saws priced from $8,990*
Stationary Systems priced from $31,999*
holtecusa.com
Designed to cut whole bunks of lumber to length in less than 60 seconds with an accuracy of +/-1mm (.040”) and leave a planer finish. * It's that simple. *Specifications and prices are subject to changes without notice and results are based on HOLTEC installed V-Series systems using Scratcher® chain technology. Proper maintenance is essential for accuracy and longevity of cutting components and your results may vary. Photographs may show systems with optional accessories. All trademarks are the property of their respective owners. ©2023 HOLTEC USA Corporation. All rights reserved.
Streamline your truss operation with a total solution. © 2025 Simpson Strong-Tie Company Inc. M-T-CM25-SERV
Transform your truss operation with an integrated solution from Simpson Strong-Tie. The industry leader in truss plates now brings you a full suite of software, equipment, hardware and services to drive truss component manufacturing from idea to installation. Start with CS Director,™ CS Truss Studio™, CS EWP Studio™ and CS Producer™ for design, layout, production and project management. Use our powerful Monet DeSauw industrial saws to cut webs, chords, stair stringers, rafters and wedges with speed and precision. Specify the optimal connectors, anchors and Strong-Drive structural fasteners for every project. You can also complement your team with our professional truss design services at any time. Altogether, you have a smart solution made to increase productivity, ensure high quality and take your business to the next level. ®
To learn more, contact your representative at (800) 999-5099 or visit us online.
go.strongtie.com/cm
See ya, router.
SpeedWorx makes pre-cut sheathing more economical. Ditch the router and save material while increasing production.
Speedworx is a collaboration between ROGworx Automation and Safety Speed
Turn Your Manufacturing Challenges Into Solutions - Visit Us at BCMC! Our team is available to chat all things frame and truss, listen to your pain points and requirements and then recommend solutions that provide real benefits.
+
INNOVATIVE MACHINERY
LIVE DEMOS
KNOWLEDGE & EXPERTISE
Come visit us at Booth #300. We’re ready to help you achieve your manufacturing goals!
E sales@spida.com
T +1 866 647 7771
spida.com
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #17
Automation on the Factory Floor
Wendy Boyd Chief Customer Officer Machinery Group Spida Machinery
I
’ve had many conversations with manufacturers across the structural building components industry lately, and the topic that keeps coming up is automation. And it’s no surprise – automation is no longer a futuristic concept. It’s here, and it’s delivering real results.
The power of systems and machines working together, with less manual labor, across a streamlined, connected workflow is allowing manufacturers to unlock some serious value. But what really makes automation powerful isn’t just the machines, it’s the connection between every step: from design and software, to cutting, assembly, material handling, and sending out completed frames and trusses. Automation takes on the repetitive, decision-heavy tasks and does the heavy lifting, literally and figuratively, so your team can focus on what matters. Wherever you are on your automation journey, we’re here to support you step by step, offering practical, scalable recommendations based on your footprint, your budget, and your long-term goals. Whether you’re just exploring automation or you’ve already started down the path, these are some of the things to consider as you move forward.
What Automation Looks Like in Today’s Frame and Truss Manufacturing When I talk about automation, I don’t just mean having one high-tech machine in the corner of your shop. I see automation as an integrated approach, touching every part of frame and truss manufacturing – it connects your design, software, systems, machinery, and processes. Here’s how I see automation working today across a factory: •
Cutting – automated saws are faster and more accurate, optimizing cuts from design files and minimizing waste.
•
Wall Assembly – feeding lumber, precision nailing, sheathing, and stacking can all be automated to reduce manual labor and boost efficiency.
•
Truss Assembly – laser projection systems help with layout, while automated jigging systems and presses take the strain off your crew and provide greater precision.
•
Nail Plate Placement – machines handle plate placement with repeatable precision, minimizing rework and increasing throughput.
•
Material Handling – conveyors, auto feeders, robotic arms, and stackers improve workflow, reduce injury risk, and keep your factory moving.
All of this is powered by clever design and intelligent software. The software capabilities allow for real-time production metrics and insights, so you can utilize the full potential of your machinery.
Continued next page
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #18
At Spida, we’re constantly looking at ways to improve the automation functions we provide our customers. Our expert team of design engineers take the best from around the world and tailors it to the frame and truss industry, to meet the needs of fabricators today and tomorrow. At the heart of automation is our software, which we design, build, and support in-house. Our TandemOne suite of software has modules to suit all your frame and truss manufacturing needs. We provide automation solutions across cutting, wall assembly, roof truss assembly, floor truss assembly, and material handling. Take a look at some of our machines in action so you can see for yourself the benefits automation can provide.
When Does Automation Pay Off? This is one of the most frequent questions I hear: “Is it worth it?” And my answer? Absolutely – but timing, approach, and execution matter. Every automated machine adds value to a part of your workflow, but the biggest returns come when you begin to integrate automation across your production line. Here’s what you can expect: •
Labor Savings – you’ll reduce your reliance on manual labor and free up your team for more skilled, higher-value work.
•
Increased Productivity – automating previously manual processes leads to more output – and often faster than expected.
•
Better Quality and Consistency – tighter tolerances, fewer errors, and less rework means higher product standards.
•
Less Waste – optimization tools significantly reduce offcuts, miscuts, and overall material waste.
Automation offers strong ROI and can accelerate in multishift operations where uptime is maximized. You can boost efficiency and cut costs throughout the production process. Demonstrating the popularity of our machinery, in 2025, we have a Roller Plant being installed every two months in North America, with the individual company specs ranging from 88 ft to 240 ft. The majority of these customers tell us the desire to purchase innovation and efficiency, alongside the strength of build and value for the money, have meant the decision to upgrade and introduce automation was an easy one.
Continued next page
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #19
The positive feedback we’ve received really shows how automation is working, with one of our Roller Plant customers sharing, “We now have quicker setup times, much increased production volumes, and effectively it allows us to meet the demands of today as well as the future demands and growth. Production and productivity have increased very quickly and exponentially, and we’re well ahead of our production targets.”
Beyond the Numbers: Additional Benefits of Automation In my experience, automation’s impact goes beyond output. It changes the whole work environment for the better. •
Safety – less heavy lifting, fewer repetitive motions, and safer workflows mean fewer injuries and reduced worker fatigue.
•
Employee Retention – reduced physical strain and workers taking on more meaningful tasks will keep skilled staff longer.
•
Scalability – as demand grows, automation helps you scale production without hiring dozens of new employees.
How Automation Affects Your Workforce I’ve worked with plenty of teams worried that automation would remove all jobs. While it reduces the reliance on manual labor through the manufacturing workflow process (which does save time and money), in practice it’s also an opportunity for transformation and redeployment. When repetitive or physically demanding tasks are automated, you open up space for your skilled workers to take on roles in areas such as quality control, workflow optimization, data analysis, and machine maintenance. Assigning resources to these higher-value areas will help future-proof your business.
Continued next page
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #20
What’s Holding You Back? Common Barriers & How We Solve Them Many manufacturers share the same concerns about getting started with automation. Here’s what I hear most often and how we help address each one: •
Initial Investment – yes, automation can be a big investment up front, which can be a deterrent for some manufacturers. But financing options and a staggered rollout can help. At Spida, we specialize in factory layouts, where we can help you introduce automation to your factory in a phased approach, which helps you manage costs and scale smartly.
•
Implementation Disruption – the introduction of new workflows and installation of new machinery can cause some disruption. While sometimes unavoidable, we work alongside you in the planning stage and are on-site for installation, so we can control the implementation to minimize any downtime.
•
Training and Workforce Adoption – new processes, machinery and equipment require operators to use them, which means training of employees. Once we’ve completed the installation, we provide on-site training, so your operators know how to use the machinery correctly, efficiently, and safely. We train your people with ‘your’ jobs, so that they learn in the context they will be working in. Also, our design philosophy is simplicity, and we pride ourselves on building machines that are easy to use.
•
Software Integration – when you’ve automated your processes, software integration is key, as poorly integrated systems can lead to bottlenecks and errors (which is what you’re trying to get rid of!). Software integration is a key strength of Spida – and given that we design, build, and support our own software, this independence means we’re free of thirdparty software suppliers, allowing us to be agile and responsive.
Considering all of this, the bigger question I would challenge you to ask is actually, “What’s the cost of standing still?”
Continued next page
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #21
What Happens If You Don’t Automate? If you stick with purely manual processes, here’s what you’re facing: •
Higher operational costs as manual processes require more labor hours, and therefore more overhead.
•
Staff challenges because the skilled labor shortage is already here, and as the industry struggles to attract and retain skilled workers, reliance on manual processes will make this more difficult.
•
Production inefficiencies such as slower output and higher error rates which lead to rework, material waste, and of course cost implications.
•
Reduced competitiveness as you will not be as flexible as your competitors who have automation, as manual systems make it harder to quickly adapt to design changes or custom orders, which ultimately could result in lost business.
•
Lower profit margins result when all of these factors squeeze your margins, whereas automated operations could be increasing your profitability.
Put simply, if you stay manual as opposed to adding automation, you’re likely to experience higher labor costs, lower output, greater material waste, and more error/rework costs.
Final Thoughts If you haven’t started your automation journey yet, now is the time to take that first step. Review your current workflows, identify the most painful bottlenecks that automation could solve, and explore possible solutions. Start small but start smart – build a roadmap that fits your operation, and scale from there. And if you’ve already started with automation, ask yourself, “Is it true automation or partial automation?” If you’re still relying on operators to make key decisions, manually manage job lists, or manual steps remain in the workflow, you’re leaving efficiency on the table. At Spida, we don’t believe in one-size-fits-all. We work with manufacturers to understand your challenges and your goals, so we can recommend automation solutions that deliver value both today and into the future. When you’re ready to take the next step, or even if you’re just curious about what’s possible, I’d love to talk. Let’s explore how automation can work for your factory, your team, and your future.
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
IntelliVIEW Suite Manage. Design. Build. The industry’s most powerful integrated component design, engineering, and management software for steel and wood-framed structures. iCommand Manage projects, customers, materials, pricing & inventory
iModel Design truss layout & profiles
iDesign Optimize material usage & engineer trusses
iPanel Design wall layouts, panelize, bundle, break & stack
eShop Maximize crew productivity & improve manufacturing efficiency
Visit us at BCMC 2025 | Booth #1118 The IntelliVIEW Suite is a fully integrated software solution for the layout and design of a building’s rough framing elements—including roof and floor trusses, wall panels, solid sawn, EWP, sheathing and various ancillaries. The IntelliVIEW Suite provides the industry’s most complete analysis of the design, cost information and bill of materials—promoting increased profits by reducing plate and lumber use.
Ask those who know. They’ll tell you about the people at Alpine who make a difference.
BUILD MORE. alpineITW.com | 800.521.9790
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
JobLine.COM
August 2025 #17313 Page #23
Adverti$$er
The
Representing Employers Representing Employers and and Industry Industry Professionals Professionals for Over for Over 30 30 Years Years www.thejobline.com || info@thejobline.com www.thejobline.com info@thejobline.com || 800-289-5627 800-289-5627
Strictly Confidential!
BUILDING EXCEPTIONAL QUALITY TRUSS TRAILERS IN THE U.S.A.
2004 Alpine ALS 276 Linear Saw
FOR OVER 20 YEARS
ALL TRAILERS NOW AVAILABLE WITH OPTIONAL GALVANIZED ROLLERS
GOOSENECK TRUSS TRAILER 32’ & 36’ also available with Split Rollers (pictured with optional Top Roller)
NE
STANDARD TRUSS TRAILER 40’, 48’ & 53’ sizes available
W
HEAVY DUTY TRUCK ROLLER BED Custom Built to The Size you want for all Major Truck Brands
EXTENDABLE TRUSS TRAILER 38’-53’, 42’-60’, 50’-70’ & 53’-80’ sizes (pictured with optional Headache Rack)
Scan the QR Code to take you directly to our website. For more information or to request a quote Email: sales@precisionequipmfg.com or call 1-800-237-5161
$40,000 Pricteion! c Redu • Servo Controlled Single Blade Linear Saw • 7.5 HP Motor (230 Volt/3 Phase) with 20" Blade • Touch Screen Computer • Ink Jet Printer • 20' Infeed & Outfeed Roller Tables
NOW $35,000
FOB HI • Waste Conveyor (under outfeed conveyor) • Extra Programmed Computer • New L1 and L2 Belt • 2 Extra Blades
800-382-0329 | www.wasserman-associates.com PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
Feed Any Saw With a Lumber PickLine Dense Lumber Storage SmartConveyor Use Existing Truck and Forklift Paths
Picking Lumber
Picking lumber
The Ingeniously Simple Enventek Lumber PickLine
SmartConveyor
Accelerate Sawing ROI - Feed The Beast!
Upgrade ANY Saw with a Lumber PickLine: Enventek RetroC MiTek Blade Alpine ALS Monet DeRobo…and More!
SmartConveyor
Improve Truss Build Quality and Efficiency
Reclaim Saw Idle Time Increase Saw Output (416) 888-4457
Reduce ForkLift Operating Costs Maximize Yard Space
Edmond.Lim@LimTekSolutions.com
www.LimTekSolutions.com
No More Mini Batches Cull Lumber Out at the PickLine Collate Cut Lumber at the Saw F1 Pit Stop Truss Building
6021 Yonge St, Unit 1019 Toronto, ON, M2M 3W2
The Most Advanced and Unbiased Expert CM Advisement Best Practices Full/Non-Automated Equipment
Labor Time Studies Building Designs
All Areas - Manufacturing, Sales, Design, and Admin. √
Productivity Improvement for All Departments.
√
Reliable Time Units— R.E., S.U., Work Minutes.
√
Employee Issues — Reduce Costs & Vacancies.
√
Equipment and Building Design Recommendations.
Link for Testimonials of Services www.todd-drummond.com
√
Ask About Summer Schedule Discounts! todd@todd-drummond.com
(603) 748-1051
Effortlessly Monitor and Coordinate Every Project in Every Department and Division While Accessing All the Project Information From Anywhere.
√
Thousands of Users and Trusted by Some of the Largest LBMs, CMs, and Home Builders.
√
One of the Largest Project Management Software Providers in North America.
√
Very Easy to Use for Fast and Easy Deployment.
√
Works With Any Other Application via API interfaces.
Phone: (904) 268-9230 sales@appwright.com www.appwright.com
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #26
Lean Manufacturing Only Works with the Best Employee Management Practices Todd Drummond
A
nyone with any training in lean practice has heard of standard terms such as the Five “S” and “Just in Time.” What is not discussed often enough is that lean principles are based on healthy management and employee relations, which is the foundation of the lean-manufacturing tenets. That’s right: to implement real and meaningful lean principles in a company, you need to communicate and trust each other (management and employees) to garner better results. As part of my consulting services, I discuss and teach best practices for healthy employee relations management. Without question, the companies with the most significant resistance to this one aspect of the lean training are those in greater need of change and embracing better management-employee relation practices. And just FYI, the best-performing companies have very low turnover and excellent employee management, leading to high performance, low errors, and higher quality. So, what can we describe in a short article to start the conversation about better communication and employee relations practices? Sometimes it is easier to explain something by showing what it is not.
Food for Thought Great minds discuss ideas: they focus on the root cause and its effects. Average minds discuss events: they focus only on the effects and do not understand why these effects have happened. Small minds discuss people: they shoot the messenger and blame people, which solves nothing. — Eleanor Roosevelt Be honest with yourself and think about how others react to what you are trying to achieve when you communicate with your boss or the people you supervise. Do you find yourself at a loss as to why people are not reacting favorably to what you are saying and doing? If you think you do not have room for improvement, you are likely blind to your actions. (Self-improvement is a lifelong endeavor.) So to help one understand the poor characteristics of both managers’ and employees’ communications, here are three huge red flags that are clear signs of trouble. 1. You tend to obsess over the past. Imagine a world where no one will forgive you for your intentional or unintentional mistakes. Imagine that, every time you speak with your boss about an idea, they always bring up some past mistake you made and are unwilling to discuss your new idea. Of course, you are telling yourself right now that this is simply a ridiculous and toxic environment to work in, and that you would soon look for another company. Now ask yourself: How willing are you to forgive others for their transgressions? Do you focus on the Continued next page
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #27
person instead of the idea as a leader? A leader who focuses on the person is a leader with poor management skills, who cannot inspire and train effectively. (Why would they choose to follow you?) I have worked for a manager who always reminded me of my past mistakes. I honestly had very little respect for him as a person. As the employee, do you expect only others to forgive and forget, yet hold everything for a later date of redemption? To focus on past mistakes is a clear sign of immature and childish behavior. 2. You’re unable to empathize with others. If you cannot understand why people react the way they do, cannot forgive them for their actions, or do not understand why others do not listen to your suggestions the way you hoped they would, it may be as simple as you failing to understand them from their perspective. I have seen this far too often in managers when they do not understand why their great incentive program fails to achieve the desired results. You may ask yourself more than once, “Why won’t employees improve or make changes when I have given them everything they need?” Do you care about understanding things from the employee’s perspective, or is it only what you think is best? This kind of manager is surprised by the poor results. (Shocking!) The same can be said of an employee who does not understand why their boss asks for something the employee thinks is unreasonable or impossible. There are reasons why the manager cannot tell you everything about the decisions and requests they make. Let us face basic facts: understanding other people’s perspectives is the first step to better communication. 3. You suffer from envy. Are you telling yourself, “Other people have it so much better than I do?” or the classic, “It is just so unfair how ______” (fill in the blank)? Here is a simple fact of life that you may have never been taught, and that you need to come to terms with: there are reasons people are paid less or more, and pay usually corresponds with less or more responsibility and, most certainly, knowledge. A lean manufacturing culture is a healthy environment for employee and management relations. Lean manufacturing is all about team effort and implementing better practices. Do you want a cheap and effective method for improving your net profit and/or your position within your group? Go beyond empty promises and implement continuous management of employee relations. Productivity will increase, costs will drop, and everyone will be better off in a better environment. “Trust in the Lord with all your heart, and do not lean on your own understanding.” — Proverbs 3:5 There is no better value than TDC for getting the best ROI for professional consulting services. TDC is your best source for learning about proven and practical lean manufacturing best practices combined with industrial engineering principles to keep your company at the leading edge of competitiveness. Cost savings and net profit gains that usually take months or years can be accomplished in weeks or months with TDC. No one is better at providing your team with proven results for good employee practices, pricing, truss labor estimation, and so many other best-in-class practices. All areas are addressed, not just manufacturing. Please do not take my word about TDC’s services, though. Read the public testimonials many current and past clients with decades of expertise and experience have been willing to give. Website: www.todd-drummond.com • Phone (USA): 603-748-1051 E-mail: todd@todd-drummond.com • Copyrights © 2025 PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
Design and build faster than ever. From plans, to walls, to panels, and everything Learn more at EagleMetal.com
above. Introducing a new level of design tools, built from the ground up.
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #29
SAWS Name
Brand
Qty.
Used?
Part No. / Description
Pricteion! c e R du
Encoder Encoder Encoder
Encoder Encoder Encoder Encoder Encoder Encoder Drive Board
Serial #
344B
344B01013
Dynapar
7
New
H220360110022
Up / Down
2
New
H220360110422 PS
Up / Down
7
New
Alpine List Price Est. Market Value / List $521.31 $469.80
$939.60 $3,288.60
Carriage
$641.05
$2,564.20
Carriage
$641.05
3
New
H221000110022
Carriage
$534.65
$1,603.95
6
New
HC52550009000
4
New
1
New
H220360110422
$3,649.17
$469.80
H221000110422 H221000110422 PS
Dynapar Dynapar
Dynapar Dynapar
$641.05
$845.88
$5,075.28
Dynapar
3
New
H220060110022
$534.65
$1,603.95
Dynapar
1
New
H220060110422 PS
$529.57
$529.57
Dynapar
2
New
H220060110422
$529.57
$1,059.14
Dynapar
1
New
HR6250360900
$661.28
$661.28
Minarik
5
Rebuilt
115 Volt
Minarik
5
Rebuilt
230 Volt
2
New
7585DT-2 Open Frame Display 12.1"
Drive
Servostar
2
Rebuilt
Drives feeder chains
Cord for PC
Alpine
1
New
1
New
Drive Board
Model #
Dynapar Dynapar
Encoder Encoder
Function
Touch Screen Monitor
Computer
$0.00 $0.00 $0.00 $0.00 $0.00
Programmed - Came from Alpine
$0.00
Modbus
3
New
TSX C USB MBP
Servo Motor
3
New
MT304A1
$446.00
$1,338.00
$1,188.00
$1,188.00
$440.61
$440.61
Servo Motor E-Stop Control Cable
Telemecanique
Selector Swith
Allen Bradley
1
New
MT302A1
1
New
XY2CE2A196H7
2
New
$0.00
800EM-SM22
$36.71
$73.42
Selector Swith
Allen Bradley
1
New
800MR-NH2QB
$169.71
$169.71
ICE Block / Contactor
Finder
5
New
40.31 10 Amp 250 Volt 24 Volt D.C.
$0.00
Arms for Hold Down Chains
2
New
2 sets
Live Deck Chain
1
New
A section of approx. 3 feet... not a whole chain
$0.00 $0.00
Gearbox
Ironman
1
New
Left Hand; NH-BMQ-824-50-L-56
$859.28
$859.28
Gearbox
Ironman
1
Used
Right Hand; NH-BMQ-821-50-R-56
$683.74
$683.74
2
Used
Carriage - Double Shaft; SP.23UF-2
$400.00
$800.00
1
New
Right Hand; 23UF-1
$637.99
$637.99
$1,498.00
$1,498.00
$400.00
$400.00
Gearbox
Grove Gear
Gearbox
Grove Gear
Gearbox
Grove Gear
1
Used
Double Shaft; 20-UF-2
Gearbox
Grove Gear
1
New
Carriage - Double Shaft; (SP)MB23UF-2
2
1 Used & 1 New
Gearbox
Ironman
Gearbox
Grove Gear
Gearbox
Grove Gear
New 1
Box of Misc. Gearbox Parts
Angle; NH-FH-826-50-HR-23 Angle; SP MB26Y-2
4
New
CF 1 1/4 S
5
New
F15T8/CF
2
New
Lumber Hold Down Springs & Bolts
7
New
Lumber Hold Down Chain Sprocket
1
New
Lumber Chain Sprocket
1
New
Shaker Mount Plate
27
Overhead Arm Guide Rollers & Bushings
56
New
Shaker Pan Bushings
3
New
New
$800.00
$27.05
$108.20
$3.89
$19.45
$0.00
$0.00 $0.00 $0.00 $0.00 Red - Under Shaker
2
New
@ end of arms
3
New
2 Large; 1 Small
4
New & Used
2 New; 07280000
Telomatic
Misc. Brake Parts / Caliper Mounts
$0.00 $0.00 $0.00
Lumber Stops Saw Brake Rotors
$0.00 $0.00 $176.54
Used
Misc. Data Cables Saw Blade
$0.00
$400.00
$0.00
McGill Philips
Computer / Data Cable
Saw Brake Calipers
$1,686.00
BAD GEARBOX FOR PARTS: SP MB26Y-2 Used
Guide Bearings Cabinet Light Bulbs
$0.00
New 3
$706.16 $0.00
Retipped & Resharpened 32"
$0.00
Alpine AutoMill RS Parts Alpine AutoMill RS Parts per Uploaded PDF $23,500 NOW $19,500 FOB GA Wasserman & Associates 800-382-0329 www.wasserman-associates.com
2007 Servo Auto Omni Component Saw 2007 Servo Auto Omni Component Saw – Five-blade SERVO controlled saw that has been well maintained, and is configured with [1] 30 inch blade, and [4] 20 inch blades. Cuts dimensional lumber from 2×4 through 2×12. Includes Windows 7 Pro operating system, PC controls, all available spare blades and shaker side-pans. 460 volt, 3 phase, 60 Amp electrical required. As-is, Where-is $29,997 NOW $26,997 FOB MB Wood Tech Systems 765-751-9990 www.woodtechsystems.com
A
The
Component Manufacturing dverti$er
Serving the Structural Building Components Industry
“Serving the Component Industry Since 1996”
Now offering short term Working Capital Loans
Start smarter... Grow faster... Achieve more... Keep More of Your CASH Eliminate Yearly Financial Reporting
Low Fees Fixed Payment Programs No Additional Collateral
cvillella@acceptlease.com | www.acceptlease.com 894 Beaver Grade Road, Suite #304 - Moon Township, PA. 15108
Phone: 412-262-3225 Fax: 412-262-1154
MANUFACTURERS’
REPRESENTATIVES
NEW!
NEW!
New Monet FWA-500 CA Automated Floor Web Saw Price Based on Configuration FOB MO Additional Information Here 765-751-9990 PHONE: 800-289-5627
www.woodtechsystems.com
Safety Speed Manufacturing Model 6400 Panel Saw Safety Speed Manufacturing model 6400 vertical panel saw, 3 HP worm drive motor, 64 inch crosscut, 1 3/4" inch maximum thickness, accuracy within 1/64th of an inch, 10 foot welded steel frame with integrated stand and linear V-guides, enclosed counterweight system, adjustable vertical and horizontal rules. Quick changes from vertical to horizontal cutting. Includes machined aluminum material rollers, hold down bar, wheels, quick stop gauges and material hold downs. Dust collection ready. Options available include lower frame extensions, digital readouts, laser guide, stop bar, vacuum and midway fence. 120 volt. Starting at $5,799 FOB MN.
765-751-9990
Read/Subscribe online at www.componentadvertiser.com
www.woodtechsystems.com FAX: 800-524-4982
™
UC LINEAR SAW SERIES
Delivering Precision & Service Across North America! Nova Scotia, CANADA
Payzant Building Products ProCut™ UC Saws, Material Handling Systems, & ProDeck™ Alaska, USA
Kelly Truss Georgetown, CAYMAN ISLANDS
ProCut™ UC Saw
Utah, USA Cox Lumber - A.L. Thompson ProCut™ UC Saw St. George Truss ProCut™ UC Saws & Material Handling Systems
See more locations!
The ProCut™ UC Linear Saw Series range of configurable solutions, service, and support are transforming production lines across North America; earning the trust of manufacturers from the United States and Canada to the Caribbean and Mexico. The ProCut™ UC Linear Saw cuts up to four boards high with accuracy, delivering perfectly cut roof, floor, and wall panel components ready for assembly. Pair your saw with the ProDeck™ Lumber Infeed and custom Material Handling Conveyor Systems and keep materials moving. These tailored solutions make ProCut™ the partner manufacturers rely on to stay ahead in a competitive market. Discover how precision cutting and custom configurations can work for your business.
Cut, Deliver, & Build The Right Components For Success.
ProCut, LLC
www.procutsaws.com
(612) 521-9193
EVEN WITH ALL ITS ADVANCES, THE SAME OLD ADAGE RINGS TRUE. NOTHING DRIVES QUITE LIKE A V.8. Inspired by ten years of intensive field experience and the ample and detailed feedback of numerous customers, we’re pleased to introduce the most advanced, most enhanced and high-performance Terminailer yet - Terminailer V.8. Drawing on invaluable time in the trenches closely evaluating Terminailer’s performance under varying conditions, our engineers have incorporated critical learning and insight to enhance simplicity, performance and operator control. Just part of what V.8 offers includes: •
Vastly enhanced operator control for even greater productivity
•
A redesigned nail-feed supplying EverWin PN90-PAL industrial nail guns
•
Simplified pneumatics featuring direct air-supply to all six nail guns
•
Even more sub-component profiles for wall design flexibility
•
Rugged durability with pharmaceutical grade assembly
Developed by people who know well the mechanics, safety considerations and business aspects of wall panel production, Terminailer V.8 combines more enhancements & operator-friendly features than ever to take your productivity to the next level and beyond. Contact us to learn even more and to put the V.8 performance in motion at your facility.
765-751-9990 www.woodtechsystems.com
Wood Tech Systems is a registered tradename of Wood Truss Systems, Inc.
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #32
The truss industry relies on 3rd party quality assurance services to provide random visits to review the plants Quality Assurance program along with their operations. If your plant needs to comply with the IRC, IBC and to those who depend on solid, experienced QA expertise, we ask you to consider selecting Timber Products Inspection, Inc. (TP) as your choice for 3rd party inspections. Proudly serving the forest products industry for over 50 years, TP brings the expertise you need to ensure your business is successful. As a responsible partner, TP delivers to clients, employees, and the industries we serve the confidence to drive value through the effective use of our diverse professional team. TP would like to welcome the following authorized agents to our inspection team, each of whom have many years of experience in the truss industry! •
Al Coffman
•
Jean Hart
•
Curt Holler
•
Chuck Ray
•
Glenn Traylor
•
Elliot Wilson
If you have questions about how you can make this selection, please contact your authorized agent above or Glenn Traylor at 919-280-5905 or trusguy@gmail.com.
https://www.tpinspection.com/ https://www.tpinspection.com/auditing-services/truss
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #33
What are Your Options to Address Member-to-Member Gaps? By Glenn Traylor
recent phone call has prompted me to address the issue of fixing gaps. There are some misunderstandings about what qualifies as a member-to-member gap, and the options to fix them are not always clear either.
A
ANSI/TPI 1 recommends that members in a truss to touch each other when possible. The tight contact helps transfer loads from one member to another without depending on the connector plate to translate the load through the truss and ultimately to the bearing. Sometimes, member-to-member gaps happen. Sometimes, it’s a mis-cut. Sometimes, it’s the pressing operations. Often, it is the degree of variation of web and chord members, because wood is a natural product and can vary due to properties and the manufacturing process. The standard allows for repairs per 3.7.6.3 Correction Procedure by inserting a metal shim. The standard states: “Corrections procedures for joints with gaps exceeding these tolerances shall require shimming, unless otherwise specified by the Truss Designer. Shims shall be of galvanized metal, or alternatives approved by a truss designer, to obtain firm bearing between members…”
Using a Metal Shim vs. Rebuilding the Component The shim has specific requirements, as follows: 1. Must be metal 2. Must be coated to reduce rust potential. 3. Must be secured in place with a specific nail size or an approved fastener. 4. Must be at least ¾” wide. 5. Must have a folding tab that allows the shim to be secured or an approved alternate method of securing the shim as specified by the truss designer. By now, if you’re a normal, competent truss manufacturer you might be asking, “why on earth would I not just pull the truss apart and fix the problem?” Well, this aspect might need some discussion.
Continued next page
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #34
Situations where pulling the truss apart is not reasonable include these examples: 1. Removing connectors and replacing a connector may not be possible due to ANSI/TPI 1 Section 3.9.3, because removing the connector requires a larger connector to make up for the 50% reduction requiring a larger connector. A good example of this might be a floor truss where large plates are already installed. 2. Potential damage to the lumber is too great to risk further damage to the truss. 3. The location of the truss, as installed in the customer’s structure, might dictate a nonaggressive repair like pulling out lumber and connector plates. 4. Sometimes speed is of the essence, and a shim is a quick operation. 5. Shimming can be done while the truss is still in the pack without unbanding. 6. Shimming does not require repressing. 7. Shimming on the job site is much easier to do to correct the gap problem. Of course, the downside is the customer sees a repair more dramatically than a lumber/plate relocation. Here is an application for installing a shim (photo used with permission). What issues do you see? •
The shim is not coated or galvanized.
•
The shim does not have a tab, however, this requirement may be determined by the truss designer if the shim can be secured.
•
The shim is not secured to prevent removal. Gravity is not reasonable prevention as the shim can be dislodged during installation and use.
The Bottom Line Don’t discount shimming as an appropriate fix. It does not replace proper assembly, but in certain situations, it can be exactly the solution you need to manage member-to-member gaps. Thanks go to my caller for recommending article topics – additional suggestions are always welcome! An ANSI/TPI 1 3rd Party Quality Assurance Authorized Agent covering the Southeastern United States, Glenn Traylor is an independent consultant with almost four decades of experience in the structural building components industry. Glenn serves as a trainer-evaluator-auditor covering sales, design, PM, QA, customer service, and production elements of the truss industry. He also provides project management specifically pertaining to structural building components, including on-site inspections and ANSI/TPI 1 compliance assessments. Glenn provides new plant and retrofit designs, equipment evaluations, ROI, capacity analysis, and CPM analysis. Glenn Traylor Structural Building Components Industry Consultant http://www.linkedin.com/in/glenntraylor PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
Unlock innovation with a platform built for openness and connectivity.
DESIGN ANY SHAPE
COMPATIBLE FILE FORMATS
CONVERT PLATES
Draw and evaluate even the most custom trusses with full design flexibility.
Work seamlessly with industry-standard files like .TRE, .TPS, .IFC and more.
AnyPlate gives you the freedom to choose from any plate vendor at any time.
OPEN API INTEGRATION
GO PAPERLESS
COLLABORATE INSTANTLY
Power your tech stack with our open API and developer tools.
Access every truss, drawing, and calculation digitally from anywhere.
Cloud-based design tools keep your entire team in sync, wherever they are.
Get started with our free plan.
WWW.PARAGONTRUSS.COM
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
August 2025 #17313 Page #37
Adverti$$er
The Ultimate
TRUSS JIGGING TABLES Precision and Value You Can Rely On! Upgrade your truss-building workflow with our precision engineered jigging tables – the industry standard for quality and efficiency. Built to accommodate all truss jig parts and accessories, our tables ensure a flawless fit, every time.
Precision. Efficiency. Affordability..
We combine unmatched craftsmanship with competitive prices to deliver the best value for your business. Choose us – trusted by truss builders nationwide!
We offer Machinery Services
Before
Recondition | Rebuilds Replace Components Framework | Fabricate Guards Repaint Equipment Etc.
863 602 2019 info@trussbuilderparts.com 2810 Parkway St. Unit 4 | Lakeland, FL 33811
After Restoration
www.trussbuilderparts.com
HSF
Hain Systems Framer
T
he Hain Systems Framer (HSF) will help you build square and accurate wall panels for residential or commercial construction applications. It will help you cut building costs by saving time and improving your quality. It’s a reliable, efficient and proven Electrical Supply: 110 VACsimple design. The HSF is based on a proven design with over 20 years of actual production system that features a ruggedly 1/4 HP, 110ItVAC, Linearfully Actuator useMotor: and maintenance experience. comes assembled and is designed for portable job site framing or in-plant permanent Highly Accurate: +/- .010 Inches installation. The table has many optional attachments and will support Mylar Tape wall layout or any other type of layout. The Stop Rail: 2 x 4 x 1/4 Aluminum Extrusion optional gun rails can also be retro-fit to any table. Stops: Jig Bored Steel Stop Blocks:
Internal Components: Details: Dimensions: Table Construction:
Air Supply:
Machine Billet Aluminum Hardened, Ground and Polished Steel and Billet Aluminum Length: 5Structural feet (60”) to 60 feet (720”) Thick-wall Steel Tubing, Jig Welded for Accuracy Height: 12 inches 90Depth: psi (10 12 CFM Air Flow Recommended) inches
If you are looking for the fastest, mostVAC consistent way to measure and cut your product, 120 Electrical Supply:
then the Hain Measuring System (MEA) is your answer. The MEA changes from one length
Graythe operator’s position on the line. It Powder t any lengthCoat: instantly, up to 60’,Industrial without changing
is also highly accurate (+/- .010) and quickly moves from one length to the next in Dimensions: Height: 43”
seconds. The MEA is designed for quick and easy setup and is simple to use. Even a first
time user will be productive with little or no16’ training required. It can adapt to any saw and Length: or 20’ can be mounted to any surface so that you can integrate the MEA with your existing
Width: Adjustable to 10’ or 8’ operation to 12’ and setup. The MEA is versatile allowing “left” or 8’ “right” handed
measurement in “feet and inches” or “inches” depending on your preference. The MEA is Shipping Weight: 3000 lbs also available in a “Skid Mounted” version.
theHAINCOMPANY 6125 Enterprise Drive, Unit 92 | Diamond Springs, CA 95619 530.295.8068 | sales@thehaincompany.com PHONE: 800-289-5627
Electrical Supply: Motor: Highly Accurate: Stop Rail: Stops: Stop Blocks: Internal Components: Dimensions:
110 VAC 1/4 HP, 110 VAC, Linear Actuator +/- .010 Inches 2 x 4 x 1/4 Aluminum Extrusion Jig Bored Steel Machine Billet Aluminum Hardened, Ground and Polished Steel and Billet Aluminum Length: 5 feet (60”) to 60 feet (720”) Height: 12 inches Depth: 12 inches
If you are looking for the fastest, most consistent way to measure and cut your product, then the Hain Measuring System (MEA) is your answer. The MEA changes from one length t any length instantly, up to 60’, without changing the operator’s position on the line. It is also highly accurate (+/- .010) and quickly moves from one length to the next in Read/Subscribe online at www.componentadvertiser.com FAX: 800-524-4982 seconds. The MEA is designed for quick and easy setup and is simple to use. Even a first time user will be productive with little or no training required. It can adapt to any saw and can be mounted to any surface so that you can integrate the MEA with your existing
Building on Better.
616.698.7500 | stilesmachinery.com
Off-site construction solutions built around your business.
Build higher-quality components and modules more efficiently. Stiles has been a trusted name in the U.S. woodworking industry for over six decades. Today, we continue to lead the way with a consultative approach to off-site construction, partnering with you to increase speed, precision, and productivity, while providing ongoing parts and service support when you need it.
Invest in equipment built to perform—and last. Stiles is the exclusive North American provider of WEINMANN, the world’s leading machinery and equipment manufacturer for off-site construction. Whether it’s an individual machine or fully automated system, Germanengineered WEINMANN machines provide innovative solutions that revolutionize your production.
Make your good decisions work even better.
Learn More
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the SAWS
August 2025 #17313 Page #39
Adverti$$er
GOOSENECK ROLL OFF TRUSS TRAILERS
Pricteion! c e R du
26’, 32’ & 36’ sizes available, Split Rollers available too!
2 YEAR WARRANTY ALL TRAILERS NOW AVAILABLE WITH OPTIONAL GALVANIZED ROLLERS
2021 Powermatic Model 511 Panel Saw 2021 Powermatic model 511 panel saw. Vertical panel saw features a powerful 3HP worm-drive motor which rotates in the carriage, adding the versatility to perform rip cuts. The solid aluminum rollers assure smooth feeding of stock and perfect 90° cuts every time. This saw will handle panels up to 5-ft tall in unlimited length. Includes horizontal and vertical scales and casters for mobility, the counterweight system keeps the saw carriage in the desired position when loading or unloading panels. Features dual 4″ dust collection ports with nylon brush surrounding the blade for superior dust collection from the front and the rear side of the panel. 115v, 1-phase electrical required. $6,799 NOW $1,999 FOB AZ Wood Tech Systems 765-751-9990 www.woodtechsystems.com
(Shown with Additional Top Roller option)
Whirlwind Model 1000 Cut-Off Saw • 5 HP Motor with 14" Blade • 2 3/16" x 8 1/4" Capacity • Pneumatic Blade Guard/Lumber Clamp • Foot Pedal Control • Dust Collection Outlet • 460 Volt / 3 Phase • 1 Left Hand & 1 Right Hand Model Available $3,500 NOW $2,250 Each FOB NC Wasserman & Associates 800-382-0329 www.wasserman-associates.com
VALUE PACKAGED WITH PIN LOCKS, LOAD CONTROL, LED LIGHTS, STROBE LIGHTS & MORE!
BUILDING EXCEPTIONAL QUALITY TRUSS TRAILERS IN THE U.S.A.
Scan the QR Code to take you directly to our website. For more information or to request a quote Call or Email: 1-800-237-5161 sales@precisionequipmfg.com
MANUFACTURERS’
! W E N 2023 Northfield Model 410 Upcut Saw NEW 2023 Northfield model 410 upcut saw available for immediate shipment. 90/90 degree cuts to 4″ x 10″ capacity (fence forward position) to 2″ x 14″ (fence rearward position). Saw is configured for material from left to right, with 3″ x 6″ air operated cylinder, filter, regulator, lubricator, 10 HP motor, enclosed steel base with cast iron table, magnetic starter and adjustable operating speed from 20 to 60 CPM. Includes optional two-palm controls, additional 4″ dust outlet, NEMA 12 electrics with fused disconnect and two 18″ diameter 60 tooth blades with 1″ diameter bore. 460 volt, 3 phase electrical required. $18,630 FOB MN Wood Tech Systems 765-751-9990 www.woodtechsystems.com PHONE: 800-289-5627
1982 SpeedCut MetraCut Centerline Saw 1982 Speed Cut Metra Cut, model SSA-11, centerline saw, 16″ blade, maximum cutting depth of 6″, maximum cut length of 31″, 164 deg. cutting range and 5 HP motor. Includes push-button on/off controls and analog angle measure on turntable with air stop, 20′ long infeed conveyor with OEM SpeedMeasure, 20′ long outfeed conveyor and one (1) spare blade. 208 volt, 3 phase electrical required (can be converted to 240v/440v). $6,990 FOB WY Wood Tech Systems 765-751-9990 www.woodtechsystems.com
M ACdverti$er
The
omponent
anufacturing
FOR OVER 20 YEARS
REPRESENTATIVES
NEW! New Monet DeRobo Linear Saw New, DeRobo linear saw by Monet organizes "fill" boards to increase optimization of each board, can produce unlimited scarf cuts, cuts 1 or 2 boards at a time and cuts webs, chords, wedges, rafters and open-stair stringers. Works with all major connector plate manufacturer's software. Features include 22 inch blade, left-to-right feed direction standard, lumber push and pull grippers for more accuracy, ink marking on the 1 1/2" face of the incoming boards and small piece capture and delivery to the front of the saw for easy access. Infeed deck and bunk feed are shown as options only. 480 volt, 3phase.
Serving the Structural Building Components Industry
$245,000 FOB MO. 765-751-9990
Read/Subscribe online at www.componentadvertiser.com
www.woodtechsystems.com FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #40
Improve Your Efficiency with a Hain Sub Component Nailer By Leonard Hain
W
ith the continuing growth of wall panel production, everyone is looking for ways to improve their efficiency. An important place to look when you’re considering your options—speeding up subcomponent production! If you want to increase your efficiency, take a look at the new video demonstrating the Hain Sub Component Nailer. Our Sub Component Nailer (SCN 6) substantially speeds the cumbersome task of building wall panel sub-components including trimmers (built two at a time), stud-block-stud channels, and variations of preassembled framing subcomponents. When efficiently run, the SCN 6 cycles 14,000 nails in a shift.
The SCN Specs The SCN 6 is CAD/CAM designed, efficiently built using a modern in-house CNC machining center to machine aircraft-quality 6061 billet aluminum stock for all internal parts. The outside frame is laser cut 1/4”-steel main frame plates, powder-coated and assembled with grade 8 fasteners throughout. All of this makes the SCN 6 robust, simple, dependable, and productive. And the SCN 6 control is simple with advanced pneumatic circuitry that is intuitive and robust as well as being easy to troubleshoot and maintain. The SCN 6 can place (2) nails in a 2×4, (2) or (3) nails in a 2×6, or stagger the nail pattern all with just a turn of a switch. It comes with one Heavy Duty 10-foot roller bed infeed, with a board guide. The outfeed is a Heavy Duty 10-foot roller bed with automatic side-discharge roller transfer system. There is a board bump stop used when loading component boards to the stop, and after the first nail cycle the stop retracts automatically to facilitate advancement of component. When the component is fully nailed and exits the SCN 6, the stop retracts automatically and the finished component is automatically transferred to the transfer roller. Continued next page
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #41
SCN Setup and Safety The SCN 6 is a plug and play unit that is skid mounted for ease of install. First, secure the machine by lagging to the floor. Second, hook up clean dry air that has a large air volume. Last, plug in electrical of 120 VAC and you are making sub components! It’s that simple. The SCN 6 has no length limitations, so it works well in “Just-In-Time” and “batch” production. Changing to the SCN 6 setup can happen instantly—from chosen configuration to chosen configuration, you simply use the analog machine multiple position switch, with (8) common configurations from corners, channels, trimmers, and other configurations desired within those 8 parameters. The SCN 6 is fully enclosed for safety, and loading the nail guns is simple and convenient for the operator. Moreover, it is easy to maintain, which further increases its durability.
Work Smarter Are you intrigued yet? Check out the new video demonstrating the Hain Sub Component Nailer in action. And, when you’re ready to improve your production, be sure to contact The Hain Company at (530) 295-8068 or sales@ thehaincompany.com.
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
BCE-MASTER INTRODUCING THE ALL NEW
IN 8' & 10' WiDE
AUTOMATiC OR MANUAL
HEAVY DUTY TABLE TOP
T-SLOT OPENING FOR JiGGiNG
20' TO 40' iN LENGTHS AT YOUR REQUEST
Element Equipment
a brand manufactured by GOW Group Inc.
Experience the unparalleled expertise of our building components equipment manufacturing company, delivering top quality equipment built with the customer's needs in mind.
SCAN HERE
OR CONTACT US FOR MORE iNFO 1 (800) 799-4711
info@element-equipment.ca
Our Latest Installation Project www.element-equipment.ca
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
August 2025 #17313 Page #43
Adverti$$er
Terminailer
NEW!
Price: $237,900 FOB: ND
The Terminailer all but shatters the stereotypical myth that sub-component equipment is essentially peripheral – unimportant. And it does so by quickly and accurately driving far more framing nails in your wall panel jobs than ever before. Whether in your shop or in the field, one operator sets the pace for production and quality, which reduces labor costs and other aspects of overhead.
The new Terminailer V.8 improves on the previous generation Terminailer in several key ways: All new HMI/Software
Reengineered air system
• Siemens Pivoting HMI Touchscreen display to operate from either side • On-screen tutorial for all menu items • Operator now controls functions such as process speed, nail spacing, nail patterns, etc. • Simplified input commands Nail Feed Complete Redesign • All new frame to allow for redesigned nail coil placement with direct feed path • EverWin PN90-PAL industrial tools now standard equipment • New nail guides with spring-loaded tensioners • Nail coils move with vertical travel of the nail guns
• SMC “Soft–Start” Pneumatics • Simplified air for control to all components: lift– cylinders, triggers, stop–gate, etc. • Direct air supply to each nail gun for improved nailing performance • All pneumatic elements are clearly labeled for EZ service and adjustment Overall Features • Pharmaceutical grade assembly, industrial grade durability • “Block–wheel” redesign for 3X increased applied force • Approximately 1,200# of applied clamping force resulting in straighter finished • Subcomponents from even the poorest lumber • Larger doors for easier access to interior elements including coil–nail spools
Terminailer is an event-driven, sub-component assembler that will quickly and accurately drive 30% to 70% of the framing nails in any wall panel job. In your shop or in the field, one operator sets the pace for production and quality. The Terminailer functions independent of design software, requires zero set-up time when switching between any configuration, and requires no special operator training. The Terminailer is easy to move around the shop so its location can evolve as your shop evolves. With all of the nailing occurring in the closed main chamber, nail injuries and nail location misfires are eliminated, making your plant that much safer. With nearly ten years of development from people that know machinery, it is assembled to exacting standards, well supported, and it is easily maintained with shelf-item parts. Terminailer: vetted, tested, and ready to drive maximum productivity for you. Be sure to check out our videos below for a quick review of this revolutionary machine! 240 volt, 1-phase, 30 (full load) Amps, 60 Hz electrical required. 50 SCFM @ 120 PSI air required. Net weight 7,000 lbs.
765-751-9990 PHONE: 800-289-5627
www.woodtechsystems.com Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
HUNDEGGER lnnovationen fur den Holzbau
HUNDEGGER
_,...,_,
Hundegger leads the way in automation innovation for the truss component industry. Our advanced CAMBIUM software offers cutting-edge automation and digitalization solutions, revolutionizing operations, boosting productivity, and driving sustainable growth for manufacturers like you.
We go beyond standard mechanization; we champion true
Automation. The Hundegger TD-II isn't just a saw-it's a
REVOLUTIONIZE YOUR TRUSS MANUFACTURING WITH THE HUNDEGGER TD-II
transformative, comprehensive solution designed to streamline your production process. From retrieving lumber to optimizing, nesting, stacking, destacking, sorting, buffering, and precise delivery, our system ensures peak efficiency and productivity, tailored specifically to truss component manufacturing.
Harness the power of data with Hundegger's advanced CAMBIUM TACTICAL software. It meticulously tracks and optimizes your production, ensuring more automated operations and significant productivity gains. We provide state-of-the-art automation and control solutions that set the industry standard. Our focus on industrial automation and robotics positions Hundegger as the leader in enhancing performance and efficiency in truss component manufacturing and beyond. Hundegger products are essential for future-proofing your business. Elevate your productivity and secure your competitive edge with our advanced technologies and automation solutions, meticulously designed to meet the unique demands of component manufacturers today and tomorrow.
Don't get left behind. Invest in the future with true automation from Hundegger and see your business thrive.
om .
.
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #45
SAWS
2018 Spida Plate Marker with DeWalt Saw • 20' of Steel Framed Table with Plastic Top • Spida Automated 20' Length Stop/ Plate Positioner • Auto Plate Positioning with Manual Marking • Control Cabinet Enclosure with Touch Screen Computer • DeWalt Model DWS780 Miter Saw • Support Table for DeWalt Saw • 10' Infeed Roller Conveyor • Excludes Dust Collector & Spida Annual Support Fee $19,900 FOB ND Wasserman & Associates 800-382-0329 www.wasserman-associates.com
1994 Timbermill Model MH5G-20 Component Saw Five blades cut lumber from 2″ x 4″ through 2″ x 12″, 4″ x 2″ lengths from 12 inches to 20 feet, including four-angle floor webs from 18 inches. All powered movements. Saw includes (1) 30″, (2) 20″ and (2) 14″ blades, analog scales, chain-drag scrap conveyor with chain-drag scrap incline, and an extra set of blades. Additionally this saw includes an extensive spare parts inventory including: Contacts/Starters, fuses, push buttons, limit switches, crank handles, scales/rulers/dials, angulation, conveyor, and saw motors, universal joints, and arms for outfeeds. 480 volt, 3 phase electrical required. $17-924 FOB NC Wood Tech Systems 765-751-9990 www.woodtechsystems.com
$72,500 FOB WA 2024 Spida Automated Apollo Saw • Automated Truss Length and Angle Cutting as directed by Truss Design Software Output • Direct Drive 7.5 HP Motor with Automated 160 Degree Angulation & 18" Blade • Minumum Angle of 10 Degrees with 36" Stroke for Long Scarf Cuts • Braked Saw Motor, Safe Grip, Variable Stroke Limiter & Plexiglass Shield for Operator Safety • 20' of Steel Framed/MDF Table with Automated 20' Length Stop & 10'
Gravity Conveyor • Workstation, Control Cabinet Enclosure & 21" Touch Screen Integration • Kufo Dust Collector • Spare Parts • Truss Cutting Operating Software • 480 Volt / 3 Phase • Lighty Used • Excludes: Installation/Training & Annual Technical Support Fee
800-382-0329 | www.wasserman-associates.com
2003 Alpine ALS 276 Linear Saw
$35,000 FOB IL • Servo Controlled Single Blade Linear Saw • 7.5 HP Motor (230 Volt/3 Phase) with 20" Blade • Touch Screen Computer • Ink Jet Printer • Powered Infeed Roller Tables & Outfeed Queue System • (2) Manual Bunk Feeders (saw can be used with or without bunk feeders) • Waste Conveyor (includes new belt which needs to be installed) • 240 Volt / 3 Phase • Motion Control Upgrade in 2018 • New Computer with Touch Screen in 2019
• T1 Axis Rod and Pillow Bearings replaced in 2023 • (4) T1 Linear Bearings replaced in 2023 • (4) Z1 Linear Bearing replaced in 2023 • (8) Belt Drive Linear Bearings replaced in 2023 • Several Belt Drive Wheels replaced in 2023 • New Z1 Actuator in 2023 • Spare Parts: 2 White Drive Belts, Spare Power Cable, Rebuilt Z1 Actuator • Video available upon request
800-382-0329 | www.wasserman-associates.com PHONE: 800-289-5627
2004 Alpine ALS 276C Linear Saw $39,990 FOB OH Cuts wall and truss parts from lumber depths 2×4 through 2×12, 60”+ scarf cuts, internally optimizes material (up to 11 7/8″ x 1.5″ EWP) Includes 20 foot OEM auto-infeed conveyor and 15 foot OEM outfeed conveyor, and under-saw scrap conveyor with belt-type incline. All servo controlled functions, Microsoft Windows XP OS, 7.5 hp motor with 20” carbide tipped blade. Includes spare infeed/outfeed belt and any available spare parts. No printer is included. The door latch needs to be repaired. 220v / 3 ph power, 125 PSI air required. 765-751-9990 www.woodtechsystems.com
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #46
“OBBB” and “AII” Inspiration to Feed the Beast!
Edmond Lim, P.Eng. LimTek Solutions Inc.
B
oth the US’ One Big Beautiful Bill Section 179 and Canada’s Accelerated Investment Incentive are designed to stimulate economic growth by encouraging businesses to invest in new equipment and technology by providing upfront tax relief. How’s that for Inspiration to Feed the Beast?!
Here’s my disclaimer: “The information shared is for informational purposes only and is not a substitute for professional tax or financial advice. Tax laws are complex and can change, and your business circumstances are unique. Always consult with a professional accountant or a tax consultant to discuss your specific tax and financial situation.” OK, back to the business at hand. This year at the BCMC in Omaha, Enventek will have an even bigger booth than at last year’s BCMC show. We are bringing everything again, with emphasis on Version 2.0 of the Plate Dispenser. This will be an operational production model with our recommended minimum 32 plate SKUs in full on demo mode. Meaning of course, if you ask for a demo, you’ll get to help re-fill the plate hoppers at the end of the demo! Our booth setup will be similar to last year as shown in these pictures. We’ll have a Lumber PickLine in front of the Amazing AutoFeeding RetroC accessorized with SpeedCatch AutoFill Carts, all integrated with PlantOne TVs.
The Plate Dispenser (left) and the SpeedCatch end of the RetroC (right).
Lumber PickLine (left) feeding the RetroC (background) and the Plate Dispenser (right).
Lumber PickLine (left) feeding the RetroC (behind) and the Plate Dispenser (right).
Continued next page
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #47
A great way to get inspiration to Feed the Beast in 2025 or 2026 is to attend one or all of the August Feed the Beast! Plant Tours. Click this link to register: https://limteksolutions.com/tours/ We’ll be offering four (4) truss plant tours that will be a nice warm-up for BCMC in Omaha and to help in making decisions and calculating ROIs. These four photos preview these four tours: Thursday August 21, 2025, Edmonton, AB – Drop in anytime from 9 am to 4 pm to see a two-month-old Double PickLine feeding a brand new RetroC and an existing Monet DeRobo Linear saw. Monday August 25, 2025 – Three (3) completely different implementations of a Fully Loaded RetroC fed from Lumber PickLines auto-filling SpeedCatch Carts supported by PlantOne TVs. Drop in to see one, two, or all three in the same day. 8 am Smith Falls, ON – A green field truss plant (see also “In-Line Truss Production Starts With Lumber Picking”). 1 pm Waddington, NY – An extreme plant makeover of a side-by-side Fully Loaded RetroC and a relocated MiTek Blade saw fed from a Double Lumber PickLine (see also “An Extreme Plant Makeover in Pictures” and “Inspiration to Feed The Beast! in 2024”). 3 pm Cornwall, ON – A high-rise Lumber PickLine feeding a Fully Loaded RetroC up on a loading dock (see also “Threading the Needle with a High Rise Lumber PickLine”).
Join us for an August plant tour and then come see us at BCMC where Enventek’s proven process automation will give you inspiration on how to Feed the Beast! https:// limteksolutions.com/#solutions.
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #49
SAWS
2003 Alpine AutoMill RS Component Saw, Model 344 Computer controlled saw sets up in 2 to 19 seconds and downloads from a network or by using a touch screen for ease of operation. Five-head automated component saw works in both automated (downloading files) and semi-automated control via touchscreen input. It has [23] axes of automated movement, enhanced diagnostics, auto management reporting. The RS cuts from 13″ to 20′ long material in size ranging from 2×3″ through 2×12″, includes [3] 18″, [1] 22″ and [1] 32″ blades with air brakes, shaker pan waste conveyor to incline scrap conveyor, one set of spare blades and any available spare parts. (Infeed conveyor needs electrical service). 480v/60Hz/3Ph power. $17,997 NOW $12,497 FOB AZ Wood Tech Systems 765-751-9990 www.woodtechsystems.com
2000 Alpine AutoMill Component Saw 2000 Alpine AutoMill model 343H, (5) blade component saw, cuts lumber from 2×3 through 2×12, from 18″ to 20′, 4-angle floor webs from 18″. Includes powered length and angulation, digital readouts, (1) 32″, (3) 18″ & (1) 20″ blade, shaker under-saw scrap conveyor, incline, PC with Windows 98 o/s, and outfeed conveyor. Decommissioned in 2018. Stored indoors. 480 volt ,3 phase electrical required. $10,497 FOB ON Wood Tech Systems 765-751-9990 www.woodtechsystems.com
M ACdverti$er
Th e
omponent
anufacturing
Serving the Structural Building Components Industry
Like Money in the Bank. Service you can count on!
Striebig Optisaw, model Optisaw Automatic (Type # 5164) vertical panel saw station, with angled frame supporting material being cut: Max. cutting height (vertical) 5′-4″, max. cutting length (horizontal) 15′-1″, max. cutting thickness 2.36″. Both vertical and horizontal analog measuring scales on frame. Cutting head manually rotates from vertically to horizontally for rip vs. cross-cutting, adjustable spacers for repetitive cuts, 5.25 HP saw motor, 9.84″ diameter blade, guide bearings for travel , push button controls, e-stop button and dust extraction hose (no vacuum included). Overall footprint of station 19′-1″ wide x 4′7″ deep x 7′-10″ height. Sold for $36,000 new. 208 volt, 3 phase electrical required. $14,490 FOB AZ Wood Tech Systems 765-751-9990 www.woodtechsystems.com PHONE: 800-289-5627
NEW Hain 20' Powered Measuring System Adapts to Any Saw. Left or Right Hand Operation. Feet & Inches System (Stops at 12” Centers) or Inches System (Stops at 10” Centers). Motor: 1/4 HP Linear Actuator (110 Volt). Stop Rail: 2 x 4 x 1/4” Aluminum Extrusion. Stops: Jig Bored Steel. Stop Blocks: Machine Billet Aluminum. Optional Lengths from 5’ to 60’. Optional Gang Stop. Add $890 per 10’ Section of Heavy Duty Roller Conveyor with Stands $8,990 Wasserman & Associates 800-382-0329 www.wasserman-associates.com Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
LUMBER RETRIEVAL SYSTEM
BUILT STRONG BUILT TO LAST At ACER, we don’t cut corners. Every component is carefully designed, built, and tested to deliver the productivity and return on investment you expect. To prove the strength of the truss that forms the backbone of the Ranger RS, we suspended a 3400-pound car from it. Looking to feed your linear saw reliably? The Ranger RS won’t let you down.
www.acerinc.com
507-864-2220
Acer Inc. 301 Industrial Drive Rushford, MN 55971 The RANGER RS system is protected under U.S. Patent #8,960,244. Other patents are pending.
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
August 2025 #17313 Page #51
Adverti$$er
SAWS
NEW!
NEW! 2012 Vista "Angle Boss" Saw with 20' TigerStop • 2012 Vista Model M-20 AutoSet Cut-Off Saw • 0 to 75 Degree Left & Right Blade Rotation • 10 HP/460 Volt Motor with 20" Blade • 10' Infeed Roller Conveyor & 20' Outfeed Roller Conveyor • 2012 TigerStop (250" Cut Length) • TigerStop Software Version 5.30 • Excludes Dust Collector • Video available upon request • Price in US Dollars $18,880 FOB MB Wasserman & Associates 800-382-0329 www.wasserman-associates.com
Safety Speed Manufacturing Model 7400 XL Panel Saw Safety Speed Manufacturing, model 7400 XL*, vertical panel saw, 3 HP induction motor, 64 inch crosscut, 2 1/8" maximum thickness, accuracy within 0.005 inches, 13 foot long welded steel frame with integrated stand and linear V-guides, enclosed counterweight system, adjustable vertical and horizontal rules. Quick changes from vertical to horizontal cutting. Includes machined aluminum material rollers, hold down bar, wheels, quick stop gauges and material hold downs. Dust collection ready. Options available include digital readouts for vertical cuts, automated length measuring, laser guide, stop bar, vacuum and midway fence. 208-230/460 volt, 3 phase electrical (208-230 single phase, 2 HP power optional +$100.00). $14,499 Base, FOB MN. Wood Tech Systems 765-751-9990 www.woodtechsystems.com
Safety Speed Cut Model 7000 Panel Saw
Safety Speed Manufacturing model 7000, vertical panel saw, 3 HP induction motor, 64 inch crosscut, 2 inch maximum thickness, accuracy within 1/64th of an inch, 10 foot welded steel frame with integrated stand and linear V-guides, enclosed counterweight system, adjustable vertical and horizontal rules. Quick changes from vertical to horizontal cutting. Includes machined aluminum material rollers, hold down bar, wheels, quick stop gauges and material hold downs. Dust collection ready. Options available include lower frame extensions, digital readouts, laser guide, stop bar, vacuum and midway fence. 208-230/460 volt, 3 phase electrical (208-230 single phase, 2 HP power optional +$100.00). $10,199 Base, FOB MN.
765-751-9990
A
The
Equipment Wanted! Saws
Trucks & Trailers
• Automated Component & Linear Saws (2010 & Newer) • Monet DeSauw or TimberMill Manual Component Saws • Floor Web Saws • Spida (Apollo) Saws with Truss Automation • Bunk Cutters
Modular Equipment
Truss Equipment
• Roller Gantry & Hydraulic Press Systems • Finish Rollers • Truss Stackers • Floor Truss Machines • Lumber Splicers • Jack Tables • C-Clamp Presses
• Stretch Roll-Off Trailers • Gooseneck Roll-Off Trailers • Pacific Automation or MiTek Mobile Home Press
Component Manufacturing dverti$er
Serving the Structural Building Components Industry
Presents
Truss Tales
Contact Wasserman & Associates for a Fair Market Value Assessment of your Used Equipment
Stories and posts on the truss and components industry
Operational, Needs Work, and Parts Only equipment will be considered!
Let us know if you would like to contribute to this online forum
800-382-0329 | www.wasserman-associates.com PHONE: 800-289-5627
www.woodtechsystems.com
Read TrussTales
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #52
What a Flight on Japan Airlines Taught Me About Visual Safety Culture
O
n a recent trip from Seattle to Vietnam via Tokyo, I flew on Japan Airlines and was struck by more than just the exceptional hospitality. What stood out most was their disciplined safety culture, specifically how their flight attendants conducted safety checks. As they walked the cabin before takeoff and landing, I noticed a practice that felt refreshingly deliberate: verbalizing the check and pointing to each item visually as they confirmed it. It wasn’t just procedural, it was purposeful. That small act resonated deeply with me.
By Ben Hershey CEO, 4Ward Solutions Group
The Missed Opportunity in Our Plants In offsite manufacturing, we talk a lot about building lean and safety cultures. But too often, those cultures become overly verbal, routine, and disengaging, especially for the younger generations on our teams. Millennials and Gen Z, who now make up a significant portion of the workforce, are visual-first learners. They’re conditioned by the digital tools we use every day, yet many of our safety practices still rely on outdated briefings and rote reminders. Visual cues, whether it’s pointing during a safety check, using standardized work visuals, or physically modeling a behavior, aren’t just nice to have. They’re how people learn. They’re how safety becomes part of the culture, not just the compliance manual.
Visual Management Isn’t Just Lean It’s Human Visual management is one of the cornerstones of lean teaching and training, but we often forget that it’s also rooted in how people learn and retain information. Studies and practical experience alike confirm that visual cues dramatically improve recall and compliance. In safety checks, visual confirmation (like pointing at gantry rollers, fire extinguishers, lockout stations, or eyewash areas) reinforces not only the task but the accountability behind it.
Continued next page
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #53
And this isn’t about adding complexity, it’s about clarity. A visual safety walkthrough, whether at shift start or before a machine is operated, gives both new and experienced team members a tangible signal: safety is active, not passive. And it brings energy to what can otherwise be seen as mundane.
Bring Safety to Life This is a great opportunity to reenergize our Gemba walks and leadership routines. Let’s not just “walk” the floor. Let’s model the behavior. What can we do as leaders? •
Revisit your safety walks. Don’t just observe—demonstrate. For example, wear your PPE in the proper areas and show others how to do the same. Lead by example.
•
Use visual checklists and signage that prompt behavior, not just awareness. Instead of generic safety signs have the sign say something specific like “Is this guard locked in position?” or “Test the E-Stop…does it rebound correctly?”
•
Encourage your team to point, touch, and engage with what they’re checking. An example might be that before the gantry is activated to roll a truss, the operator points and says the word clear in various key places on the table to ensure no one or “thing” like a staple gun is in the area where the truss is going to be rolled.
•
Reinforce that safety is active, not passive. Create a near miss/good catch system for recording leading indicators instead of just lagging.
Visual management isn’t just a lean tool. It’s a leadership tool.
Final Thought If a flight attendant on a trans-Pacific route can reinforce safety with every gesture, we can do the same in our operations. As leaders, we set the tone not just with our words but with our actions, especially the visual ones. If you’re looking for ways to build a stronger visual culture around safety and lean practices, my team at 4Ward Solutions Group would be honored to help. Let’s build safer, smarter operations together.
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
Cutting, Framing and Truss Solutions - We Do It All! We provide high quality precision machinery suitable for cutting and assembly of walls, roof trusses and floor trusses. All your needs are covered.
+
OVER 70 PRODUCTS
EXPERTISE & KNOWLEDGE
SERVICE & SUPPORT
If you’re wanting to increase productivity in your factory, then get in touch with us today. E sales@spida.com
T +1 866 647 7771
spida.com
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
August 2025 #17313 Page #55
Adverti$$er
New Monet DeSawyer 2000 Component Saw
! W
NE $349,000 Location: MO
New, Monet DeSawyer 2000, computerized, five-bladed component saw, sets up in 15 to 17 seconds, can run in manual mode, downloads projects from a network or manually using display screen controls. Features all powered movements, cuts from 15" 90/90 cuts to 20 foot length, 2 x 3" to 2 x 12" lumber depths and internal brakes are standard. Options include enhanced servo controls featuring autocalibration, catcher's display and either shaker or belt scrap conveyor and incline. 440 volt, 3 phase electrical. www.woodtechsystems.com
765-751-9990 PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
woodchuck 90/90 Parts Saw
ROGworx.com
Sales@ROGworx.com
833-ROG-WORX (764-9679)
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #57
800-382-0329
2014 Mitek Blade Wood Processing System •
Automated Square, Angle, Rip & Bevel Cutting
•
Auto Infeed Rail
•
2x3 through 2x12 up to 16' in Length
•
Powered Skewed Outfeed Conveyor with Roller Conveyor Receivers
•
5 HP Motor (recently updated) with 17" Blade
•
Incline Waste Conveyor
•
230 Volt / 3 Phase
•
Touchscreen Computer
•
Available in late June 2025
•
Crooked Lumber Sensor
•
Video available upon request
•
Ink Jet Printer
•
Auto Deck (4 Chain)
$119,900 FOB WY
Buy Factory Direct From Wasserman & Associates at the same price as the Manufacturer, and get the added support and care you need to be up and running FAST! WE’LL EVEN HELP SELL YOUR USED EQUIPMENT TOO!
800-382-0329 | www.wasserman-associates.com PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
Software. Equipment. Hardware. Service. Your all-in-one truss component solution. © 2025 Simpson Strong-Tie Company Inc. M-T-CM25-SOFT
Transform your truss operation with an integrated solution from Simpson Strong-Tie. The industry leader in truss plates now brings you a full suite of software, equipment, hardware and services to drive truss component manufacturing from idea to installation. Start with CS Director,™ CS Truss Studio™, CS EWP Studio™ and CS Producer™ for design, layout, production and project management. Use our powerful Monet DeSauw industrial saws to cut webs, chords, stair stringers, rafters and wedges with speed and precision. Specify the optimal connectors, anchors and Strong-Drive structural fasteners for every project. You can also complement your team with our professional truss design services at any time. Altogether, you have a smart solution made to increase productivity, ensure high quality and take your business to the next level. ®
To learn more, contact your representative at (800) 999-5099 or visit us online.
go.strongtie.com/cm
A
Th e
Component Manufacturing dverti$ dverti $ er
By Simpson Strong-Tie
W
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #59
Simpson Strong-Tie’s Saw Line-up at BCMC e are just under two months away from the 2025 Building Component Manufacturers Conference (BCMC) in Omaha, Nebraska. Simpson Strong-Tie’s dedicated employees are excited to demonstrate our latest innovations in our booth this year.
Along with our software offerings, design services, and hardware, we are excited to once again showcase our equipment solutions. We will have the following saws at the show: •
Monet DeRobo linear saw
•
Monet DeSawyer 2000 fully automated component truss saw
•
Monet Floor Web truss saw
•
EasyFrame’s EasyCut automated marking saw
As a longtime partner to the component manufacturing industry, Simpson Strong-Tie provides a total, integrated solution for component design, manufacturing, and installation. Component Manufacturers and LBMs are utilizing our EasyFrame™ automated marking and cutting system for wall panels, along with precision truss component and linear saws by Monet DeSauw. This advanced saw machinery comes with powerful software, plus onsite installation, in-depth training, and ongoing technical support. Homebuilders also rely on a full line of industry-standard truss plates and connectors, fastening systems, professional design services, and project software. Altogether, it’s a complete portfolio of solutions, tailored for your operation, backed by expert service and support. We will have two live demonstrations a day for the Monet DeRobo and the EasyCut saws. Look for more information on the scheduled times in our booth. We look forward to welcoming you to our booth this year! PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
“Alpine’s industry-leading engineering, software, and production equipment allow us to remain competitive in today’s market. Alpine’s commitment to the industry is second to none!” — Bill Weber Cascade Mfg. Co.
Visit us at BCMC 2025 | Booth #1118
Alpine has it all — the right equipment, user-friendly software and dependable hardware to improve your teams efficiency. Alpine delivers the complete package for success — including comprehensive support and service that sets us apart within our industry.
Ask those who know. They’ll tell you about the people at Alpine who make a difference.
BUILD MORE. alpineITW.com | 800.521.9790
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #61
SAWS
Pricteion! c e R du
Pricteion! c Redu
MANUFACTURERS’
REPRESENTATIVES
NEW!
Used Hain Quick Rafter Cutter • Reconditioned in December 2020 • Board Sizes: 2x4 and 2x6 • Motors: Two 1 HP / 220 Volt or 440 Volt / 3 Phase • Saw Blades: 7 1/4" Carbide Tipped (set at 45 degrees) • Angle Adjustment: Manual Rotation with Air Brake • Air Supply: 90 PSI • Carriage: Steel Rails with Steel Dual V Rollers • Pedestal: 3/16" Formed Steel • Saw Housing: 1/2" Billet Aluminum • Covers: 10 Gauge (1/8" thick) Steel • Fully Enclosed for Safety $12,500 NOW $9,900 FOB AZ Wasserman & Associates 800-382-0329 www.wasserman-associates.com
2008 Alpine ALS 286A Linear Saw • Servo Controlled Linear Saw • Touch Screen Computer • Automated Infeed Deck • Infeed/Outfeed Roller Table • Ink Jet Printer (does not work) • 230 Volt / 3 Phase • Excludes: Outfeed Queue Rollers & Waste Conveyor $29,900 NOW $22,900 FOB AZ Wasserman & Associates 800-382-0329 www.wasserman-associates.com
A
The
Component Manufacturing dverti$er
Serving the Structural Building Components Industry
Monet FWA 500 CA Automated Floor Web Saw In answer to the demands of high-volume customers comes the Monet DeSauw FWA 500 CA (Automated Controls) floor web saw. The 500 CA is perfect for component manufacturers who routinely run floor trusses in high volumes with variable web geometry. Another primary feature is enhanced safety through automation which eliminates the need to open the saw motor cabinets other than for periodic service. The 500 CA includes automation for all blades, including the fixed cut-off blade for minimal waste. Lumber infeed speed is variable up to sixty (60) boards per minute, while the powered carriage utilizes rack and pinion drive with airlock for set accuracy throughout the production run. Your operator will easily download batches to the 500 CA saw from your design software via an ethernet connection to a MS Windows 10 industrial PC with a 17″ monitor housed in a stand-alone console. If you frequently batch floor web cutting, and if enhanced safety with increased productivity are a concern, then an automated Monet FWA 500 CA may be the right selection for you. More information Here Price based on configuration.
765-751-9990
www.woodtechsystems.com
Work Smarter
2 Seconds That's all the time it takes
to drill studs for running Romex or other electrical wire in the wall panels
Motor: Heavy Duty 5 HP - 3 phase - 220v or 440 v (Please specify when ordering) Motor carriage bearing and spindle assembly mounted on Blanchard ground steel plate Lineal motion is hardened and ground V bearings and rails Block Sizes: 2 x 4 through 2 x 12 infinite height setting to center Air Supply: 100 psi 10 CFM Drills: 2 wing 3/4'” Carbide Tipped can accommodate smaller or larger Spindles: Alloy Steel polished and ground precision shafting Frame: 2" Steel With Powder Coat Finish Covers: 10 Gauge (1/8" Thick) Aluminum removable Dimensions: Height - 60 inches, Width - 33 inches, Depth - 33 inches Shipping weight: 750 lbs. - (Including crate) MADE IN AMERICA BY AMERICANS
See the Stud Driller in action! Go to https://youtu.be/AnODX5vPesE for a demonstration
530-295-8068 • www.thehaincompany.com PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #62
2016 Alpine AutoMill HP Component Saw Alpine AutoMill HP, model 349C component saw. Servo controlled computerized saw sets up in 2 to 19 seconds and downloads from a network, or by using a touch screen for ease of operation. Five-head automated component saw works in both automated (downloading files), semi-automated control (via touch-screen input) or manual mode. It has (23) axes of automated movement, enhanced diagnostics, and auto management reporting. The HP cuts from 2′-6″ to 20′-0″ long material in size range from 2×3″ through 2×12″, and 4-angle floor webs from 2′-0″. Includes [3] 18″, [1] 20″ and [1] 30″ blades with air brakes, Windows 7 o/s and under-saw scrap conveyor. The Windows 7 o/s can be upgraded to a version of Windows 10 that will be supported until 2032, at an additional expense. Also includes over $8,000 in spare parts. 480 volt, 3 phase, 100 Amp electrical required. 90 PSI @ 69 SCFM air required.
$129,997 - FOB OR www.woodtechsystems.com
765-751-9990 PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
August 2025 #17313 Page #63
Adverti$$er
SAWS
NEW! 2003 Koskovich Auto Omni Component Saw • 5 Blade Automated Component Saw • Cuts 2x3 through 2x12 from 11" to 20'-0" • Computer, Enclosure & Stand • Waste Conveyor (under saw) • Excludes Incline Waste Conveyor (adjacent to saw) • Video available upon request • Add $12,500 for 6 Chain Live Deck $16,500 FOB ND Wasserman & Associates 800-382-0329 www.wasserman-associates.com
$14,499 Base FOB MN
Used - Alpine Jack Rafter Cutter Parts Machine $500 – Make Offer Eide Machinery Sales, Inc. 612-521-9193 www.eidemachinery.com
A
The
Component Manufacturing dverti$er
Serving the Structural Building Components Industry
Safety Speed Manufacturing Model 7400 XL Panel Saw Safety Speed Manufacturing, model 7400 XL*, vertical panel saw, 3 HP induction motor, 64 inch crosscut, 2 1/8" maximum thickness, accuracy within 0.005 inches, 13 foot long welded steel frame with integrated stand and linear V-guides, enclosed counterweight system, adjustable vertical and horizontal rules. Quick changes from vertical to horizontal cutting. Includes machined aluminum material rollers, hold down bar, wheels, quick stop gauges and material hold downs. Dust collection ready. Options available include digital readouts for vertical cuts, automated length measuring, laser guide, stop bar, vacuum and midway fence. 208-230/460 volt, 3 phase electrical (208-230 single phase, 2 HP power optional +$100.00).
765-751-9990
2010 Alpine ALS 286A Linear Saw 2010 Alpine ALS 286A Linear Saw -Linear feed saw model 286A cuts truss parts from lumber up to 12″ nominal depths. Cuts bevels from 90 to 20 degrees, scarf cuts to 60 inches, and optimizes material usage. From OEM literature, “…has 6-axis of automation, self-calibrates at powered startup with 1/32” accuracy”. Includes Matthews InkJet printer (single 3 ½” face), servo motor drive mechanism, 10 HP motor, 20 inch carbide tipped blade, small parts outfeed bin and touch screen control with Windows XP o/s. Includes 18 ft. infeed conveyor, 16′ outfeed conveyor and any available spare parts. Decommissioned in March of 2025. Cutting chamber weighs 8,000 lbs. 230V, 3 phase, 85 Amp electrical required.
$40,995 FOB QC
PHONE: 800-289-5627
www.woodtechsystems.com
STANDARD TRUSS TRAILERS 40’, 48’ & 53’ sizes available
2 YEAR WARRANTY
ALL TRAILERS NOW AVAILABLE WITH OPTIONAL GALVANIZED ROLLERS
VALUE PACKAGED WITH PIN LOCKS, LOAD CONTROL, LED LIGHTS, STROBE LIGHTS & MORE!
BUILDING EXCEPTIONAL QUALITY TRUSS TRAILERS IN THE U.S.A.
FOR OVER 20 YEARS
Scan the QR Code to take you directly to our website. For more information or to request a quote Call or Email: 1-800-237-5161 sales@precisionequipmfg.com
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #64
Future-Proofing Off-Site Construction: Why Flexibility is Key in the Age of ValueAdded Manufacturing By Dario Schmidt, Off-Site Construction & Mass Timber Solutions Engineer
I
n today’s rapidly evolving construction industry, manufacturers face a growing imperative to do more with less—less labor, less waste, and less downtime. Traditionally, dedicated machines have been used for specific tasks like cutting or marking. While effective for current needs, this approach can be limiting, especially as customer demands shift and new building methods emerge.
This is why the flexibility of a CNC saw is becoming more and more of a necessity. Think of the analogy of a Swiss Army Knife: you may buy it because you need a screwdriver today, but the real value is in having a whole set of tools at your fingertips for whatever challenges tomorrow brings. Similarly, CNC saws offer manufacturers a suite of processing options—cutting, marking, routing, labeling, and more—even if not all are required on day one. This flexibility enables businesses to adapt swiftly when new opportunities or requirements arise. Market trends in North America are clear: what’s standard practice today may be only one part of the equation tomorrow. Many component manufacturers currently focus on trusses and wall panels. However, as the industry embraces more pre-fabrication, there is a rising need for additional value-added products such as pre-cut floor cassettes, I-joist packages, and even finish carpentry elements for timber framing. Expanding into these areas can open new revenue streams and strengthen customer relationships. For example, lumber yards, by adding pre-cut or processed lumber packages, can differentiate themselves and provide greater value to their clients. Similarly, as European-style timber framing and larger-dimension components gain traction in North America, manufacturers prepared with the right technology will be best positioned to seize emerging opportunities. Anticipating these shifts—and investing in flexible, future-proof equipment—ensures that manufacturers are not just responding to today’s needs but are prepared for the evolving demands of the market. This is where the BEAMTEQ series comes in. Much like the Swiss Army Knife in your toolbox, BEAMTEQ is designed as a multi-functional solution for modern off-site Continued next page
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #65
construction. Unlike single-purpose saws, BEAMTEQ combines straight and angular cutting, advanced marking, labeling, routing, and milling, all within a single, integrated platform, with the possibility to connect directly into your wall panel or floor cassette lines. This modularity is particularly relevant as manufacturers seek to diversify their product offerings. Whether you’re considering processing I-joists for floor cassettes, pre-cutting lumber packages, processing stair stringers, or exploring the complex joinery of timber framing, BEAMTEQ’s adaptable design provides the flexibility to support both current operations and future expansion. Beyond its versatility, BEAMTEQ’s robust, German-engineered construction ensures longevity and precision, while software-driven optimization features help maximize material yield and minimize waste. Automated feeding and offload options further reduce labor requirements and boost productivity.
How the BEAMTEQ can help your operation for today and tomorrow •
Versatile Processing: Handles I-joists, stair stringers, standard lumber, and complex joinery, all on one machine.
•
Labor Efficiency: Advanced automation enables high output with just one operator.
•
Seamless Integration: Works easily with existing software and production lines.
•
High Precision: Consistently accurate cuts, marking, and labeling.
•
Scalable Automation: Modular options let you add more automation as your needs grow.
•
Durability: Built with robust, long-lasting construction for demanding use.
The construction industry’s move toward greater pre-fabrication and value-added manufacturing is unmistakable. As the pace of change accelerates, manufacturers who equip themselves with flexible, future-ready technologies will be best placed to grow, adapt, and thrive. The BEAMTEQ series exemplifies this new approach: a “Swiss Army Knife” for component manufacturing that empowers businesses to meet today’s needs while staying ready for tomorrow’s opportunities. For those looking to expand their capabilities, whether in panels, floor cassettes, or finish carpentry, rethinking equipment choices now may be the key to unlocking future growth and staying competitive in a dynamic market. If you are interested in unlocking that future potential for yourself, please reach out to us! Contact Stiles Machinery at (616) 698-7500 or visit StilesMachinery.com/ OSC to learn more.
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
The Auto-Feeding RetroC
The Amazing RetroC by Enventek
A complete wood processing system proven to profitably feed cut lumber to truss plants of all sizes. Easy to use, simple robust automation that is scalable with less labor. A RetroC holds calibration.
Out Produces Any Saw in Batch Cut or Cut by Truss Mode
Auto-Feeding, no upper hold-downs (just 15 automation axes) with electronic braking. Efficient material handling that will significantly increase cut piece production with reduced operating costs and improve truss build times with consistently accurate cut pieces.
The Magic of SpeedCatch - No Catching Labor Catching labor is eliminated with our optional SpeedCatch cart system. Sophisticated SpeedCatch software enhances the efficiency of truss production by effectively collating and organizing the lumber at the truss tables. SpeedCatch upgrades the RetroC to a comprehensive one-person (sawyer) wood processing system.
(416) 888-4457
Edmond.Lim@LimTekSolutions.com
www.LimTekSolutions.com
6021 Yonge St, Unit 1019 Toronto, ON, M2M 3W2
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
August 2025 #17313 Page #67
Adverti$$er
Prices good through August 2025
PRECISION EQUIPMENT TRUSS TRAILER MANUFACTURING EW
N 2002 Monet B500 5-Blade Component Saw $54,908 FOB NC
IN-STOCK Truss Trailers for SALE
Due to manufacturing efficiency upgrades we have increased production and have various trailers with various options on our lot READY TO GO!
* Large Toolbox and/or Headache Rack can be added as Options Does NOT INCLUDE FET or Freight ² DOES NOT include Freight
1
EXTENDABLE TRUSS TRAILERS 38’-53’ (T-1418) - No Options*- $65,6701 42’-60’ (T-1392) - Headache Rack, Large Toolbox - $71,2391
42’-60’ (T-1414)S- O NoLD Options* - $68,9701
42’-60’ (T-1416) - No Options* - $68,9701 42’-60’ (T-1415) - No Options* - $68,9701
50’-70’ (T-1277) Headache Rack, SOL- D Large Toolbox, Sliding Winches - $81,9591 50’-70’ (T-1346) - Headache Rack, Large Toolbox, Lift Axle - $76,7001 50’-70’ (T-1347) - No Options* - $76,7001
2002 Monet B500 five-blade component saw – Single Sided Setup includes digital readouts, push-button movement controls for angles, manual movement for length, mechanical backup counters, (1) 30″ diameter blade, (2) 18″ diameter blades, (2) 16″ diameter blades, powered chain infeed with upper hold-downs and shaker pan waste conveyor. Cuts angles from 8 to 115 degree angles. Minimum 90/90 cut is 10 inches and shortest angle cut is 18 inches. Cuts 2×4 through 2×12 lumber up to 20 feet in length. Includes horizontal shaker-pan waste conveyor, spare set of blades, any available spare parts. 480 V, 3 Ph, 100 Amp electrical.
765-751-9990
a blending of excellent services and products, with answers that work...!© Not producing the results you need or want – getting conflicting info about what to do and the equipment and the systems you may need?
Before you Buy - Ask yourself – do I need a salesman or a guide? If you want an Independent Guide that has your bottom-line results as the #1 priority, Call Me. If the salesman will do - we'll talk later... Also, don't let Financing Deals influence your best solution. FitzGroup can arrange – Zero down & No payments for 90 Days! Please be assured that your investment with any of our selected partners will not cost one penny more with the Fitzgerald Group as your purchasing contact. In addition, you will receive the full advantage of our Partner Relationships and Services NOT offered elsewhere.
RFitzgerald@FitzGroup.com PHONE: 800-289-5627
50’-70’ (T-1377) - Headache Rack, Large Toolbox - $78,3691
53’-80’ EXTENDABLE TRUSS TRAILER (T-1420)
Lift Axle Toolbox and Headache Rack - $83,9191
www.woodtechsystems.com
Fitzgerald Group, LLC
719.528.5445
50’-70’ (T-1186) - Headache Rack, Large Toolbox - $78,3691 $76,369 (Demo)
www.FitzGroup.com
GOOSENECK TRUSS TRAILERS
32’ Gooseneck (T-1381) - Front Roller - $50,825² 32’ Gooseneck (T-1382) - No Options - $49,485² 36’ Gooseneck (T-1384) 12K Axles, Front Roller-$53,163² 36’ Gooseneck (T-1385) No Options - $50,515² All of our Trailers come with a 2 Year Warranty and are custom built. We use blast prep for our powder coat prime and paint system, air-ride suspension and we now offer Galvanized Rollers as an option. We build 38’-53’, 42’-60’, 50’-70’ and 53’-80’ Extendable Truss Trailers, 26’, 32’ and 36’ Gooseneck Truss Trailers (Split Truss Available as well on Goosenecks) and 40’, 48’, and 53’ Standard Truss Trailers.
You Can Truss our Truss Trailers!
Quality American Made Truss Trailers
Call Bryan Shinn today to purchase one of the trailers listed above or to get a Quote and have us build a NEW Truss Trailer for you call or email -
Bryan Shinn - Sales Manager 701-941-2017 or 1-800-237-5161 bryan.shinn@precisionequipmfg.com
sales@precisionequipmfg.com
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
CREATE. CONVERT. SHARE. BUILD.
Paragon gives you the flexibility to control your tools, partners, and process. TRUSS LINK
ANY PLATE
Any18
Any18HS
Any20
Any20HS
TDD
.TPS
.TRE
.TRS
.IFC
.DXF
.TDL
.QCX
.CYB
CUT
WWW.PARAGONTRUSS.COM
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
August 2025 #17313 Page #69
Adverti$$er
NEW!
New Monet DeSawyer ESC (Servo Controlled) Component Saw Monet DeSauw model Desawyer ESC enhanced servo-controlled ( ESC) component saw with touch screen user interface with backup mechanical controls. Includes three operating modes: Auto (download setups from LAN or USB), Semi-auto (touch screen setup entry), and Manual (backup push-button switches for powering all movements). Includes over-travel protection, comprehensive setup screens, auto sequencing, auto-calibration and pneumatic brakes on all five () blades. One (1) 30” blade and four (4) 16” blades. Manual cut limits are 18” min., 11” min. square edge blocks, 20’ max cut. Belt under-saw waste conveyor. Voltage: 480 volt/3 phase/60 Amp. Air: 50 PSI at 5 CFM. One-year warranty included. Can be paired with a model PD-6 lumber feed system at an additional cost. Heavy duty 80 RIV chain feed system. 16’ wide x 20’ long x 36” deck height. Transfers 3’ to 20’ lumber. Includes auto-feed control, foot pedal override, forward & reverse, variable speed control with HD double-bearing construction. Other additional-cost options include, inkjet marking, label printing, backside screen display, spare blades and incline scrap conveyor.
$379,900 FOB MO
765-751-9990 PHONE: 800-289-5627
www.woodtechsystems.com Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #70
Continuous Improvement with JAX
W
e put our JAX gantry into full operation in late 2023, but we never stopped working to enhance its effectiveness. That’s the advantage By Kathryn Pedde of having owner-operators who are hands-on in the plant every day. Fortunately, we began with a proven automated gantry system equipped with a proven vacuum pickup technology, all manufactured and installed by Sage Automation, located in Beaumont, Texas. We believe this is the first adaptation of proven automated technology in a component plant, and we’re very pleased with the results. Unlike many other component plant innovations, JAX is designed to work with the most challenging material, Southern Pine lumber, which is the only species we use in our truss plant. Of course, we’ve had to make adjustments to the picking heads and gripping surface as we’ve gained experience with JAX. But JAX has never let us down during the post-COVID rush of orders, consistently supplying lumber to two linear saws and a component saw. No longer are we picking individual sticks of lumber, instead we only handle full bundles of 2x4s through 2x12s.
Additional Innovations to Keep Up with JAX With JAX picking up lumber so quickly, we soon learned that we needed a more efficient way to keep JAX stocked with full bundles! Since we were often restocking JAX ourselves, we were getting very tired manhandling carts loaded with two tons of lumber. While we used a fork lift to load carts, we had to manually push or pull carts to get them to the desired location within JAX. To minimize downtime, we designed JAX with two separate safety zones, so that the JAX Gantry could keep picking in one zone while we were restocking the other. Yet, we still had times when the JAX gantry was slowed down, so we adapted an electric pallet jack to the task and called it Tugger!
Continued next page
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #71
Here’s how we modified a Toyota electric pallet jack to create Tugger: •
Onto its forks, we installed an 18” high wood platform.
•
On the top of the platform, we created a gripping surface with upside-down connector plates.
Here’s how to operate Tugger: •
Position Tugger beneath the portion of a bunk that extends beyond the ends of a cart.
•
Raise the forks so that the teeth of the connectors engage the bottom of the bundle.
•
Guide Tugger using the controls on its handle to pull, push, or turn it into the desired location.
In this diagram of a truss plant with two saws, you can see how easy it is to position Tugger within the configuration for maximum convenience. On our plant tours, Tugger continues to impress attendees. Furthermore, Tugger is just one of the innumerable enhancements we’ve made and continue to make with JAX. Remember, with JAX, only full bundles are handled, which eliminates 200+ picks by hand on every bundle of 2x4s. With JAX, no one picks individual pieces. With JAX, saws run at maximum efficiency because they are fully stocked. And JAX doesn’t pick the wrong grade of lumber in the heat of summer. The result is dramatic labor savings, less turnover, and more consistent and accurate saw output. If we’re not on the plant floor, we’re in our office, watching JAX live on a computer screen and making sure that JAX keeps the feed decks of all three of our saws fully loaded. When you visit us, you can see Tugger, JAX The Wood Retriever, and the JAX-Universal Compiler (JAX-UC) software running smoothly. Please call me or Richard Pedde at 980-404-0209 with any questions or to request a tour. We’re in Shelby, North Carolina, less than an hour from the Charlotte airport.
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
ON THE ROAD TO GREATER ACCURACY AND PRODUCTIVITY, CONSIDER THIS A GREEN LIGHT. To see meaningful labor savings, quality improvement and production gains, SL Lasers with their easy-to-see green light are nothing short of illuminating. They enhance worker accuracy and productivity, regardless of experience or primary language. They can reduce tedious setup time by up to 70%. No complex training or costly service agreements are required. And SL Lasers integrate seamlessly with any component design software and are quickly installed over existing equipment.
We’ve been trailblazers in wood component laser projection since its very beginning, and we’re still delivering more rapid ROI for roof truss, wall and floor panel producers every day. Contact our enlightening team at Wood Tech Systems to see how SL Laser can deliver for you.
765-751-9990 www.woodtechsystems.com ProDirector7, the world's fastest laser, is now ever faster and more accurate. Images move much smoother from this new, compact design for all wood component applications. Faster and brighter results and even greater productivity.
Wood Tech Systems is a registered trade name of Wood Truss Systems, Inc.
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #73
SAWS
Pricteion! c e R du 2006 Alpine Speed Rafter Cutter Simplified compound cutting for hip, valley and jack rafters (double & single compound cuts) • Two Worm-Drive Circular Saws (110 Volt / 30 Amps) • Saw Turntable (for angle cutting) • Saw Carriage (for up to 45 degree bevel cutting) • Infeed & Outfeed Roller Conveyor with Stands $4,900 NOW $4,250 FOB CA Wasserman & Associates 800-382-0329 www.wasserman-associates.com •
NEW!
New Monet FWA 500 Floor Web Saw New, Monet five-head, floor truss web saw, cuts 4-angle, 4×2 floor truss webs from 13 inches and 90-90 blocks from 7 inches, to 4 foot long maximum length. Features 10-board magazine feed, powered, fixed-quadrant angulation, manual carriage standard, scrap conveyor and cut-off blade. Options available for longer carriage length, incline scrap conveyor, and choice of shaker or belt scrap conveyor. 440 volt, 3 phase, 60 Amp electrical. 50 PSI air at 5 CFM required. $75,000 FOB MO Wood Tech Systems 765-751-9990 www.woodtechsystems.com
! W E
N
New SpeedWorx Automated Sheathing Station New SpeedWorx Automated Sheathing Station by Safety Speed Manufacturing- Reduce labor and operator fatigue by taking advantage of the SpeedWorx automated vertical panel saw. This one-person station cuts wood sheathing sheets up to 50-inches x 10-feet, and up to 2-inch thickness, using a fast 1-button cutting setup with CNC accuracy to 1/32 of an inch (0.03125″). The photos of raw materials illustrate the drastic reduction of scrap material thanks to implementing the Rogworx saw station.
Used - Metra Cut Radial Arm Saw (2x) Parts Machine $500 – Make Offer Eide Machinery Sales, Inc. 612-521-9193 www.eidemachinery.com
Building Component Manufacturing Industry
Job Board Employer <> Candidate
Direct Hiring!
No Used - 2005 Model 305 Infeed Conveyor Designed for use with all component saws. To include: Soft Start ~ Soft Stop Inverter System. Programmable load sensing; Overload / Jamb sensing shut down feature. Gear motor providing conveyor speed of 36' per minute. Forward and reversing controls for location at both ends of conveyor unit. Material capacity range - 4' through 24' lumber. Chain deck pedestals 20' long with cross bracing. Staging area at the saw independent of the live deck system. 30,000lb. Deck capacity. Call for pricing Eide Machinery Sales, Inc. 612-521-9193 www.eidemachinery.com PHONE: 800-289-5627
Recruiting Fees! Post Your Opportunity Candidates Respond
Directly to You! For Additional Information twm@Hiring-Zone.com or Call: 800-289-5627 x1 Visit our website: www.Hiring-Zone.com
Visual user interface makes choosing the job and sheet cutting order easy to determine. Files are downloadable allowing for minimum waste. Saw station reads WBX file format (Alpine) or EHX file format (MiTek) or CSV files with manipulation. Automated sequencing of sheets provides optimum usage of each sheet. The cutting chamber changes from ri to cross-cutting automatically. All this in a very small machine footprint, so it can fit easily into your existing building. Visual user interface with standard ‘Auto Fill’ feature makes choosing the job and sheet cutting order easy to determine. System offers full optimization and sequence panel parts looking ahead through the job based on your specification. The cutting chamber changes from rip to cross-cutting automatically. All this in a 100 square foot footprint, approximately 25′ long x 4′ deep, so it can fit within existing facilities. Includes advanced dust collection. Integrated Printing for labeling parts is available as an option. 208-230V volts, 3-Phase, 25 Amp electrical required, 5 CFM at 100 PSI air required.
Price Based on Configuration FOB NM 765-751-9990
Read/Subscribe online at www.componentadvertiser.com
www.woodtechsystems.com FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
August 2025 #17313 Page #75
Adverti$$er
NEW!
2006 Hundegger SC1 Linear Saw $59,900 FOB WA • Serial #9184 • Servo Driven Single Blade Linear Saw • Automated Cutting with Software Download to Operator Console (Windows 10) • 20' Capacity Loading Conveyor System • Automated Infeed Wheel • Automated Clamping & Positioning System • Angle & Bevel Drive for Roof & Floor Truss Cutting
• Vertical End Mill Prep • 20' Capacity Outfeed Table with Ink Jet Printer (the REA JET print head is NEW) • 6 Arm Storage Deck (adjacent to saw outfeed table) • Waste Conveyor (under saw, parts to the rear) • Incline Waste Conveyor • A/C System for Control Cabinet • 480 Volt / 3 Phase
800-382-0329 | www.wasserman-associates.com
2015 Monet DeSawyer 2000 Component Saw 2015 Monet DeSawyer 2000, (non-servo) fiveblade, automated component saw using a touch screen interface and Windows 10 O/S for direct input. The DeSawyer 2K Can operate in automated or manual input mode. (1) 10 h.p., 30″ diameter blade with PAE setup & (4) 5 h.p. 16″ diameter blades with center line setup. Mechanical backup counters and scales, powered chain infeed with upper hold-downs, and shaker pan waste conveyor (no scrape incline). 16″ blades cut angles from 3º to 115º, 30″ blade from 3º to 100º . Minimum 90/90 cut is 10 inches and shortest 4-angle cut is 18 inches. Cuts 2×4 through 2×12 lumber up to 20 feet in length. 480 volt, 3 phase, 60 Amp electrical 90 psi air required. (Seller reserves the right to decline sale based on buyer’s regional trade area).
$119,000 FOB GA 765-751-9990 PHONE: 800-289-5627
www.woodtechsystems.com
New Monet FWA 500 Floor Web Saw
New Monet 5-head, floor truss web saw, cuts 4-angle, 4×2 floor truss webs from 13 inches and 90-90 blocks from 7 inches, to 4 foot long maximum length. Features 10-board magazine feed, powered, fixedquadrant angulation, manual carriage standard, scrap conveyor and cut-off blade. Options available for longer carriage length, incline scrap conveyor, and choice of shaker or belt scrap conveyor. 440 volt, 3 phase, 60 Amp electrical. 50 PSI air at 5 CFM required.
765-751-9990
$79,000 FOB MO www.woodtechsystems.com
Pricteion! c Redu
• 10 Each - Standard 20 Ton Track Mounted Heads with 10" x 10" Platens (refurbished in 2011) • 6 Each - 2011 Double 40 Ton Track Mounted Heads with 10" x 15" Platens • 2 Each - 2021 Double 40 Ton Track Mounted Heads with 10" x 15" Platens • 2 Each - 10 HP Two Stage Hydraulic Systems with Controls (230 Volt / 3 Phase) • Track System for 55' Scissor & Flat Bottom Trusses • 1 E a c h - P e a k H e a d Tr a c k (perpendicular to base line)
Clark Industries Multi-Head Roof Truss Pressing System • 2 Each - Movable Bottom Chord Tracks (to adjust for pitch) • 8 Each - Floating Tracks for Top Chord Head • Clamping Package: Peak, End Stop, Camber Stops & Air Clamps • Air & Hydraulic Manifolds with Quick Connectors for Heads • Pneumatic Pop-Up Skatewheel Ejectors (for truss removal) • 56' Powered Transfer Roller with Stands • 26 Each - 14' Powered & Idle Exiting Rollers with Stands
$89,900 NOW $75,900 FOB AR
800-382-0329 | www.wasserman-associates.com
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
BCE-FGS INTRODUCING THE ALL NEW
SiDE EJECTiNG
FLOOR GANTRY SYSTEM
UP TO 40' LONG HEAVY DUTY TABLE TOP PRODUCE JOiSTS FROM 9.5"-24"
Element Equipment
a brand manufactured by GOW Group Inc. Your success is our priority. We believe in building strong partnerships with our clients, working hand in hand to understand your unique challenges and goals. We pride ourselves on delivering custom machinery solutions of the highest caliber.
Our Latest Installation Project
PROUDLY MADE
SCAN HERE OR CONTACT US FOR MORE iNFO 1 (800) 799-4711
info@element-equipment.ca
IN CANADA
www.element-equipment.ca
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #77
Celebrating Growth at Element Equipment
E
lement Equipment is one component of GOW Group, an end-to-end metal fabrication company that serves several industries. In July, we were thrilled to celebrate the grand opening of our new GOW office!
By Marco Gagnon
This was a far cry from our humble start in 1968 as an ornamental steel manufacturer. Through the early years, the company evolved into designing and manufacturing its own line of equipment for the potato industry and doing work in more industrial settings including sawmills and papermills. Reorganized in the 2000s, GOW Group continued with the design and manufacturing of equipment as well as helping on material handling projects for various industries with conveyors of all sorts. In the mid-2010s, GOW Group expanded its on-site team, giving us the ability to install equipment and provide more customer support. Then in 2022, we introduced a new line of equipment for the building components industry. As the truss business arm of GOW Group, Element Equipment offers innovative products for component manufacturers in Canada and the United States, including our BCE-Gantry, BCE-Master, BCE-Finish Roller, BCE-Stacker, and BCE-Floor Joist Gantry System. So, we’d like to extend a huge thank you to everyone who came out to celebrate with us and to all of the companies that have helped us reach this point in our company’s growth. We couldn’t do it without our customers or our terrific staff. This is a major milestone for us, and we’re beyond excited for what the future holds. Here’s to continued growth, new opportunities, and the next chapter for GOW!
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
™ Table
Built To Extend Any Existing Line
Klaisler Recessed Expansion
MiTek Universal™ Table Line
CMF Expansion
Keep up with the latest press lines, without the expense of replacing your entire system. The EIS Universal™ Table is the perfect solution to compliment any line expansion and is compatible with any table type. » » » »
WizardPDS® Ready with 24” OC Spacing Side or End Eject 92” Table Width x Your Table Length Ejector Postions at Center or Side of Table
» Works with ALL Tables & Gantry types, even discontinued models » Available for Trackless, Track on Floor, & Recessed Track systems
Universal™ Table. For Every Table.
We bring the best together! Eide Integrated Systems, LLC
612-521-9193
www.eideintegratedsystems.com
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
August 2025 #17313 Page #79
Adverti$$er
TRUSS EQUIPMENT
WANTED
Pricteion! c e R du
$32-45hr. Plus Bonus Plus Benefits D.O.E
Baumeister Lumber Splicer • Vertical Hydraulic Press with 3"x 12" Platen Size • 2x3 and 2x4 Lumber Material (3" x 10" maximum plate size) • Magnetic Platens to hold plates in the correct position • Working Pressure: 1600 PSI • Dual press cycle activation for safety • 208, 240 or 480 Volt / 3 Phase (10 HP) • Video available upon request • Excludes: Infeed/Outfeed Roller Conveyor • Optional 2x6 Capacity (up to 16" long plate) Splicer is available $29,500 NOW $26,500 FOB PA Wasserman & Associates 800-382-0329 www.wasserman-associates.com
Commercial Machinery Fabricators 12' Finish Roller • 12’ Long x 18” Diameter Rollers • Front and Rear Safety Bars • Adjustable Roller Height (1 1/2” and 3 1/2”) $14,900 FOB IA Wasserman & Associates 800-382-0329 www.wasserman-associates.com
A
Th e
Component Manufacturing dverti$er
Serving the Structural Building Components Industry
RS E N SIG E D SS U R T Full Time rid
Hyb
e
ffic
In-O
ote
Rem
Part Time
Let The JobLine Represent You! We Search our Large Network of Clients Throughout the US and Canada To Find Your Perfect Job
Strictly Confidential! See Our Job Postings at www.thejobline.com
Like Money in the Bank. Service you can count on!
The
JobLine.com Truss Designer Central Florida J15346
Four Eagle Production Presses with Jig Table • (4) Eagle Production Presses (1 new in 2023, 2 with new pumps within the last 3 years, 1 with older Simplex motor) • (2) TP300 C-Clamps (Roof & Floor Trusses) • (2) TP600 C-Clamps (Extra Throat Depth for 2x8 & 2x10 Roof Trusses) • 25 Ton Cylinder • 5 1/4" x 6 1/4" Platen • 220 Volt / 1 Phase • Jig Table • (2) 40' Steel Beams • (4) Beam Trolleys $37,500 FOB CO Wasserman & Associates 800-382-0329 www.wasserman-associates.com PHONE: 800-289-5627
EMSI Field Repair Press EMSI 10 Ton Field Repair Truss Press System. Complete with: 1/2 HP, 115 Volt, 50/60 Cycle Universal Motor – Operates at voltage as low as 60 volts. 10,000 PSI Portable Power Pack with Two Speed Operation – 200 cu in/min @ 0–200 psi, 20 cu in/min @ 200–10,000 psi and Externally Adjustable Relief Valve (unit weight 55 lbs.). C-Clamp Assembly with 8" Maximum Reach, 4" x 5" Pressing Platen (optional platen available for 4” x 2”). Independent 10 Ton Hydraulic Cylinder. 10’ Hydraulic Hose Assembly with Quick Disconnect Coupling. Handle with 24 Volt Remote Electrical Pendant. Call for Price Eide Machinery Sales, Inc. 612-521-9193 www.eidemachinery.com
Our client, a private, singlelocation roof and floor truss manufacturer for the local single-family custom and small multifamily market, is seeking an on-site truss designer. The ideal candidate can hit the ground running using MiTek software. Besides the normal day-to-day duties of a normal truss designer, the employer is looking for someone who can create an overall design department process, including standards and specifications, to provide consistent design results across all designers, internal, remote, and contract. If you are someone who can set up standards in the software and in writing, Advancement to Design Manager is possible $32-38hr DOE plus benefits, PTO, 401k, Health Ins. Relocation assistance is negotiable
800-289-JOBS
Read/Subscribe online at www.componentadvertiser.com
www.thejobline.com FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
August 2025 #17313 Page #80
Adverti$$er
:
C H I H E A LT H C E N T E R O M A H A O M A H A , N E B R A S KA
S E PT E M B E R 2 9 – O CTO B E R 3 , 202 5 KEYNOTE SPEAKER
JIM TOBIN President & CEO National Association of Home Builders
15
HOURS OF EXHIBIT FLOOR ACTIVITY
SCAN CODE FOR MORE INFORMATION OR VISIT:
bcmcshow.com
15
HOURS OF PEER-LED EDUCATION
25
HOURS OF MAKING CONNECTIONS
R EG I ST E R TO DAY A N D S AVE ! E A R LY B I R D R EG I ST R AT I O N R U N S F R O M M AY 1 TO AU G U ST 8 PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #81
“Serving the Component Industry Since 1996”
Now offering short term Working Capital Loans
Start smarter... Grow faster... Achieve more... Keep More of Your CASH Eliminate Yearly Financial Reporting
Low Fees Fixed Payment Programs No Additional Collateral
cvillella@acceptlease.com | www.acceptlease.com 894 Beaver Grade Road, Suite #304 - Moon Township, PA. 15108
Phone: 412-262-3225 Fax: 412-262-1154
The
JobLine.com
Remote or In-Office Multifamily Truss Designers J15368 Eastern Time Zone Join a nationwide structural component manufacturer seeking a Remote Multifamily Truss Designer. You’ll create roof and floor truss designs and layouts using MiTek or equivalent software, interpret architectural drawings, and collaborate with internal and external teams. Responsibilities include optimizing designs, managing multiple projects, and providing technical support. Candidates should have 5+ years of multifamily truss design experience, and score above 85 on the JobLine Truss Design Skills Evaluation. Bring a friend and earn a bonus!
Wait until you see their in-office perks! For Additional Information email: twm@thejobline.com PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
EVERY CUT COUNT MAXIMUS ® High-Volume Precision Crosscutting with Integrated Package Aligner and Loop Bander
AUTOCUT ®
High-Volume Automated Crosscutting with programmable PLC Controls
SELECUT ®
High-Volume PET and Market Premium Length Crosscutting with Integrated Power Package Squeeze
TRANSCUT ® II SERIES
Portable Saws priced from $8,990*
Stationary Systems priced from $31,999*
holtecusa.com
Designed to cut whole bunks of lumber to length in less than 60 seconds with an accuracy of +/-1mm (.040”) and leave a planer finish. * It's that simple. *Specifications and prices are subject to changes without notice and results are based on HOLTEC installed V-Series systems using Scratcher® chain technology. Proper maintenance is essential for accuracy and longevity of cutting components and your results may vary. Photographs may show systems with optional accessories. All trademarks are the property of their respective owners. ©2023 HOLTEC USA Corporation. All rights reserved.
A
Th e
Component Manufacturing dverti$ dverti $ er
Carl Villella, CLFP President, Acceptance Leasing & Financing Service
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #83
Strategic Capital Investment: Leveraging Section 179 Expansion and Multi-Entity Structures in the Building Component Manufacturing Industry Post-OBBBA
T
he recently enacted One Big Beautiful Bill Act (OBBBA), signed into law on July 4, 2025, marks a transformative moment for U.S. tax policy, particularly for capitalintensive sectors like building component manufacturing. This comprehensive legislation significantly expands Section 179 expensing and permanently restores 100% bonus depreciation, creating an unprecedented environment for immediate tax deductions on qualifying equipment investments. For building component manufacturers, whose operations rely heavily on specialized machinery for efficiency, precision, and scalability, these updates offer a powerful lever for optimizing cash flow, accelerating growth, and enhancing competitiveness. The ability to immediately expense a larger portion, or even the full cost, of new and used equipment can dramatically reduce taxable income, freeing up critical capital for reinvestment and strategic expansion. The indispensable role of professional tax advisory and integrated financial planning cannot be overstated. Consulting experts is crucial to ensure compliance with IRS regulations (especially controlled group rules), maximize tax savings, optimize cash flow, and support long-term growth.
Section 179 Expansion: Unlocking Immediate Expensing Opportunities The OBBBA has significantly expanded the Section 179 deduction. For the 2025 tax year, the maximum Section 179 deduction limit has doubled from $1.25 million to an impressive $2.5 million. The deduction begins to phase out dollar-for-dollar when total eligible purchases exceed $4 million, a substantial increase from the previous $3.13 million threshold, fully phasing out at $6.5 million. This expanded threshold ensures that a broader range of businesses, particularly small and mid-sized entities, can take full advantage. Section 179 allows businesses to deduct the full purchase price of qualifying equipment and software purchased or financed during the tax year, provided it is placed in service in that same year. For building component manufacturers, this includes: •
Machinery and equipment: Automated production lines, fabrication machinery, welding equipment, cutting tools, material handling systems. Continued next page
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #84
•
Off-the-shelf software: ERP systems, CAD/CAM software, automation control systems.
•
Improvements to nonresidential real property: Roofs, HVAC systems, security systems, fire protection systems.
To qualify, equipment must be placed in service by December 31 and used more than 50% for business.
Section 179 vs. 100% Bonus Depreciation: Key Differences Both Section 179 and 100% bonus depreciation enable immediate expensing but operate with distinct rules: Feature
Section 179 (Post-OBBBA)
Bonus Depreciation (Post-OBBBA) Percentage of asset cost (100%); Generally required
Deduction Type
Fixed dollar amount; Optional
2025 Deduction Limit
$2.5 million
Phase-out Threshold
Begins at $4 million; fully phases out No phase-out threshold at $6.5 million
NOL Creation
Cannot create a Net Operating Loss Can create a Net Operating Loss (NOL) (limited to taxable income)
Real Property Improvements
Applies to certain improvements (e.g., Generally does not apply to real roofs, HVAC, security) property improvements
New vs. Used Equipment Both new and used qualify
100% of cost (permanent)
Both new and used qualify
For optimal tax planning, these provisions can be combined. Section 179 offers flexibility for purchases below its phase-out. For larger investments or when creating an NOL is desired, 100% bonus depreciation applies to the remaining cost after Section 179. The permanence of 100% bonus depreciation removes previous uncertainty, enabling long-term capital planning.
Multi-Entity Structures: Amplifying Tax Advantages and Mitigating Risk Multi-entity structures, such as parent-subsidiary arrangements or controlled groups, offer strategic advantages like enhanced liability protection and tax flexibility. However, their interaction with Section 179 limits requires careful consideration. Crucial Clarification on Controlled Groups: The IRS explicitly states that “component members of a controlled group... are treated as one taxpayer in applying the dollar limitation.” This means the $2.5 million Section 179 deduction limit and the $4 million phase-out threshold apply to the entire controlled group collectively, not to each individual entity. Strategic planning must focus on optimizing this single, group-wide Section 179 limit through careful coordination of equipment purchases and deliberate allocation of the shared deduction. Continued next page
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #85
Intercompany equipment leasing and financing arrangements within multi-entity frameworks also offer strategic advantages. Intercompany loans can provide flexible, lower-cost capital for equipment, with deductible interest payments (if at “arm’s length”). Intercompany leasing allows for strategic placement of equipment ownership to optimize depreciation or expense deductions, subject to the controlled group aggregation rules for Section 179.
Equipment Financing in Building Component Manufacturing: Industry-Specific Considerations Capital expenditures are fundamental for building component manufacturers, driven by growth objectives and maintenance needs. The industry is experiencing a surge in construction spending, demanding investment in advanced machinery like industrial automation, specialized fabrication machinery (for concrete, steel, timber), and material handling systems. The choice of equipment financing method carries distinct tax implications: •
Direct Purchase/Equipment Loan: You own the asset, making it fully eligible for Section 179 and 100% bonus depreciation. Interest payments are also deductible.
•
Capital Lease (Finance Lease): Treated as a purchase for tax purposes; eligible for Section 179 and bonus depreciation. The interest portion of payments is deductible.
•
Operating Lease: A rental agreement; not eligible for Section 179 or bonus depreciation as the leasing company retains ownership. However, full monthly lease payments are 100% deductible as a business expense.
Building component manufacturers face challenges like significant upfront costs, cash flow strain (especially in modular construction with high material deposits), budget constraints, and sometimes lender hesitation. The enhanced Section 179 and 100% bonus depreciation are crucial tools to alleviate cash flow strain by reducing the net cost of equipment acquisition, making modernization more viable.
Actionable Strategies for Building Component Manufacturers To leverage these opportunities, manufacturers should: 1. Conduct a comprehensive capital expenditure review: Annually assess planned purchases for Section 179 and bonus depreciation eligibility. 2. Optimize deduction allocation for controlled groups: Strategically allocate the single group-wide Section 179 deduction among entities. 3. Strategically time purchases: Ensure equipment is “placed in service” by December 31 for current-year deductions. 4. Leverage intercompany financing: Explore intercompany loans or capital contributions for efficient capital deployment.
Continued next page
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #86
5. Critically review and structure lease agreements: Align lease types (capital vs. operating) with desired tax outcomes. 6. Utilize deductions for new and used equipment: Both qualify if “new to your business,” offering cost-effective upgrade options.
Conclusion The One Big Beautiful Bill Act ushers in a new era of tax incentives, fundamentally reshaping capital investment strategies for building component manufacturers. The expanded Section 179 deduction and permanent 100% bonus depreciation offer unparalleled opportunities for immediate expensing, significantly improving cash flow and providing a powerful financial impetus for growth. By proactively understanding and strategically leveraging these provisions within well-structured multi-entity frameworks and optimized equipment financing choices, manufacturers can accelerate modernization, enhance operational efficiency, and build a stronger financial foundation for sustained competitiveness.
We are Acceptance Leasing and Financing Service, Inc. We were established in 1992, which puts us in our 33rd year of business. We pride ourselves on our Certified Leasing and Financing Professional designation. We are a member of SBCA and a frequent attendee of the BCMC tradeshows. We can provide financing for any new and, regardless of age, used equipment. We invite you to contact us at 412 262-3225 to discuss your particular situation.
Building Component Manufacturing Industry
Job Board Employer <> Candidate
For Additional Information twm@Hiring-Zone.com or Call: 800-289-5627 x1 Visit our website:
Direct Hiring! No Recruiting Fees! Post Your Opportunity Candidates Respond Directly to You!
www.Hiring-Zone.com PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #87
800-382-0329
$569,000 FOB Manitoba
2023 Wescana Roller Gantry System with SL Laser Projection System • Trackless Gantry Roller Press Head • 84' x 14' Steel Slotted Top Tables with Skatewheel Ejectors • Two 5' Park Sections • Transfer Conveyor • Inside Powered Conveyor
• • • • •
14' Finish Roller 60' Outside Non-Powered Conveyor 5 Head SL Laser Green Projection System 480 Volt / 3 Phase Price in US Dollars
www.wasserman-associates.com PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
MAXIMIZE
ACCURACY, SAFETY, & PRODUCTIVITY INTRODUCING THE SPLICEMASTER 12... ...an innovative approach to producing longer truss members with enhanced strength and reliability.
• Unmatched Accuracy • Superior Safety • Maximized Productivity To learn more about the SpliceMaster 12, scan this code!
Visit www.wasserman-associates.com or call 402.761.2421 for more information! 2341 Shepard Road, Milford, NE 68405 PHONE 402.761.2421 | TOLL-FREE 800.382.0329 WWW.WASSERMAN-ASSOCIATES.COM
MANUFACTURED BY
Continued next page
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
August 2025 #17313 Page #89
Adverti$$er
NEW! $92,400 FOB MT TruStance Pedestal Jig System The TruStance Pedestal Jig System was developed to solve the problems associated with pedestal jig systems, while retaining and enhancing all the advantages. The system features track mounted pedestals with a track and lockdown design, movable pedestals, and a roller lift assembly. The pedestal tops are 30″ above the floor, creating a comfortable working height. The ability to configure the system in a very small footprint makes it ideal for any size truss plant. It is designed to use with a ‘C-clamp’ type press. With the ability to install the interchangeable crossmembers and angle iron stops on both track mounted and movable pedestals, the system can be configured to meet the needs of even the most complicated truss designs. Movable pedestals can be moved and locked down efficiently; the 4″ thick steel base provides the weight needed to keep them in position. Bottom chord pedestals are installed on the steel track mounted to the floor. Pedestals are easy to move and rigidly lock into place with threaded rod locks. The optional air activated roller lift assembly raises the truss above the jig to be easily ejected. Its versatile design allows it to be configured for any set-up. TruStance recommends a (16) pedestal system for roof trusses to 60-ft in span. 120 volt, 1 phase, 20 Amp electrical required. 50 PSI air required.
www.woodtechsystems.com
765-751-9990 PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
August 2025 #17313 Page #91
Adverti$$er
TRUSS EQUIPMENT
Pricteion! c Redu
Wescana Floor Truss Machine
Tee-Lok Roller Gantry System • Tee-Lok 14' Gantry Roller with Track on Floor • 9 Each - 6'-0" x 13'-11" Steel Slotted Top Tables with Ejectors • 7 1/2 HP Motor (460 Volt / 3 Phase) • Excludes: Inside Powered Exit Conveyor, Finish Roller and Outside Conveyor $61,900 NOW $54,900 FOB HI Wasserman & Associates 800-382-0329 www.wasserman-associates.com
Virtek LPS-6R Laser Projection Heads • 8 Each - Virtek LPS-6R Laser Projection Heads • Excludes: Computer, Virtek Software License & Service Agreement $2,000 Each or $15,000 for all 8 Heads Price in US Dollars Wasserman & Associates 800-382-0329 www.wasserman-associates.com
A
Th e
Component Manufacturing dverti$er
Serving the Structural Building Components Industry
Like Money in the Bank. Service you can count on!
NEW!
Price based on configuration
New Wescana floor truss machine, available in side-eject or end-eject models. Builds floor truss depths from 12 inches to 26 inches, to 40-ft long. Features under-table cylinders powering the clamping system, built-in camber, truss flip arms, truss pop-ups, control valves for clamps, flip arms and pop-ups, with parking stations at each end of the table, and emergency shut-off bars on each side of the press head.
765-751-9990
NEW!
$49,880 2022 Eagle Production Presses with FastSet Jig Pedestals • (1) Eagle TP300 C-Clamp Press (Roof & Floor Trusses) with Beam Trolley • (1) Eagle TP600 C-Clamp Press (Extra Throat Depth for 2x8 & 2x10 Roof Trusses) wit Beam Trolley • 25 Ton Cylinder with 5 1/4" x 6 1/4" Platen
• 220 Volt / 1 Phase • (12) Eagle FastSet Jig Pedestals with 50' Base Rail • Excludes Steel Columns/Beams for Overhead Press Support • The Presses are New, The Pedestals are Lightly Used
800-382-0329 | www.wasserman-associates.com PHONE: 800-289-5627
www.woodtechsystems.com
NEW IDLE & POWERED 14' TRUSS CONVEYOR (AZ) • 14' Long x 4" or 5" (Inside Diameter) Schedule 40 Pipe • Tube Steel Stands (7" Height Adjustment - Height to be Specified) • 4 Bolt Flange Bearings • Idle and Motorized Rollers • 1/4 HP Motors (240/480 Volt-3 Phase) with Controls • 1" and 1 1/4" Cold Rolled 24" Shafts Baffled • 6 to 8 Week Delivery
800-382-0329 | www.wasserman-associates.com
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #92
Economic Outlook: Resilience and Uncertainty By the Lesko Financial Services Team
he first half of this year ended with the U.S. economy showing a resilience that forecasters weren’t expecting. Solid growth in earnings and jobs, plus a rebound after the chaos of early tariff announcements, powered past the pessimism and steep market declines of April and helped the second quarter end on a positive note while it quieted fears of a slowdown, along with worries about stagflation and/or recession.
T
The Trump administration’s sweeping tariff announcements at the beginning of April set the markets reeling. But subsequent trade negotiations prompted the delays of some tariffs and a pullback of others. Business and economic leaders harshly criticized the new tariff policies at first and blasted the sense of chaos about what to expect for the remainder of the year. But as the additional trade agreements were announced and more economic indicators pointed to growth, initial fears began to fade and hints of optimism helped the S&P 500 to steadily recoup early losses, hit a new all-time high, and finish with strong gains by the end of June. The most recent economic news and even assessments by the Federal Reserve that the economy is on solid ground have fostered a better outlook for the second half of 2025. Job creation has remained strong, with the U.S. adding an average of 146,000 jobs each month. Wages have continued to tick up, albeit slowly. Consumer sentiment has also seen a rebound, tempered by more discerning consumer choices. The stock market has been hovering near historic highs and analysts believe some bullishness has returned. Most upbeat of all are revised growth forecasts for the next six months. But some headwinds linger. Geopolitical concerns have surfaced as the war between Israel and Iran flared up when Israel launched a massive attack on Iranian nuclear and military facilities. The hostilities caused oil prices to temporarily spike but the concerns were short-lived; the U.S. decisively struck Iran’s nuclear facilities in June, then brokered a ceasefire and oil prices dropped sharply. But hopes for a similar outcome for hostilities between Russia and Ukraine have hit a standstill, with Russia not showing any desire to negotiate a ceasefire and the U.S. now committed to sending more arms to Ukraine. That conflict is likely to continue to fuel additional economic uncertainty.
Inflation and Interest Rates One other development has been an uptick in inflation after many months of cooling and the inflation rate remaining not far from the Fed’s target of two percent. Prices increased 0.3% in June, reaching an annual rate of 2.7% – the highest since one year ago. Some analysts speculate that the numbers may represent the first signs of tariff pass-throughs with even higher prices in the months ahead. Continued next page
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #93
One looming question, when all economic considerations are taken into account, is when the Fed will lower interest rates again, after keeping them steady through its last eight meetings. This has been the basis of an ongoing dispute between President Trump and Fed Chair Jerome Powell, with Trump calling for immediate cuts and Powell and other members keeping their eyes on the fallout from tariffs and maintaining a “wait and see” approach. Expectations are that the Fed will hold interest rates steady at its meeting at the end of July but may enact one of two anticipated rate cuts for this year in September.
Lesko Investment Committee Outlook The U.S. stock market has seen a generally positive year so far, with key indices like the S&P 500 and NASDAQ reaching new highs. While there have been periods of volatility, particularly around trade policy and Federal Reserve decisions, the market has been largely driven by strong corporate earnings and positive investor sentiment. At the time of this writing, the S&P 500 is up 6.5% YTD, the Dow is up 4.98%, and the techheavy NASDAQ Composite is up 7.08%. As we’ve said repeatedly, markets do not like uncertainty. President Trump’s tariff policy announced on “Liberation Day” created widespread uncertainty and was the primary driver behind the market weakness earlier in the year. Since that time, markets have become more comfortable with the President’s strategy and have rallied behind the “potential” for more balanced trade. Passing of the One Big Beautiful Bill Act, as well as the promise of deregulation in critical areas of the U.S. economy, have also contributed to the robust rally off the April 8th low to current new highs. We remain optimistic for the second half of the year with S&P estimates ranging from 6,500 to 7,000. With that said, we would anticipate markets to take a breather from the historic rally as we proceed through the seasonal weakness of the summer months. A pullback of 5% or more would be normal within a Bull Market of this type.
Looking Ahead Even with economic news pointing to renewed optimism, uncertainty and volatility are likely to linger into the third and fourth quarters of this year. It’s important to avoid letting the current market climate create a sense of complacency. The Lesko Financial Services team remains committed to helping you effectively navigate the investing climate today and for the future. It’s critical for you to stay invested, remain patient, and stick to a plan based on your unique financial position, risk tolerance, and investment timeline.
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
Increase output and minimize labor costs. Increase fastening speed by up to 40% with the WALLTEQ sheathing station’s parallel fastening guns. No more trade-offs between speed and performance. • Easy, automated execution with one operator • Achieve unparalleled accuracy and squareness with NC-controlled precision • All-in-one nailing, stapling, screwing, routing, and sawing capabilities
Build on better with Stiles Machinery. Stiles has been a trusted name in US manufacturing for over 60 years and is the exclusive North American provider of WEINMANN, the world’s leading manufacturer of off-site construction machinery.
Contact us today to discover automated solutions that take your business to the next level. 616.698.7500 | stilesmachinery.com
Learn More
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #95
2023 Panels Plus Single-Tool Sheathing Station
Featuring precision Gen. 2 controls, this system squares and sheathes wall panels ranging up to 16′ in length and up to 12′ -3″ wall height with dimensional material from 2×4 through 2×10. This late-model system includes a servodriven bridge with joy-stick controlled motion on the operator’s riding platform. The single, large-coil capacity tool carriage travels across the wall frame inserting sheathing fasteners at the spacing set by the operator. The stitchers will automatically insert fasteners through the sheathing into the top and bottom plates at your chosen spacing during the auto-return process. The bridge has 9 programmable presets for fastener spacing. Other features include: Single Beam Bridge, top and bottom plate stitchers, Operator Platform with Windows industrial touchscreen, and joystick control. Squaring table features a squaring edge, footswitch & push-button controls for telescoping side and horizontal outfeed rollers. 120 PSI at 60 CFM air.120 volt AC electrical required. Utilizes large-coil 15º wire-collated nails. (No nail tools included).
185,000 FOB WI 765-751-9990 PHONE: 800-289-5627
www.woodtechsystems.com Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
Reliable automated machinery, built to last for generations!
“The equipment is extremely durable to stand up to the beating it takes in a truss plant”. Jackie Crutcher - Manager, Wilson Lumber
Get in touch today and find out how our machinery can benefit your plant! E sales@spida.com
T +1 866 647 7771
spida.com
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
August 2025 #17313 Page #97
Adverti$$er
A
TRUSS EQUIPMENT
The
Component Manufacturing dverti$er
Serving the Structural Building Components Industry
Building Component Manufacturing Industry
Job Board
Presents
Employer <> Candidate
Truss Tales
No Recruiting Fees! Post Your Opportunity Candidates Respond
Directly to You! For Additional Information
twm@Hiring-Zone.com or Call: 800-289-5627 x1 Visit our website: www.Hiring-Zone.com
Read Now
2023 2-Head 30 mW LAP Laser System Condition: As-Is, Where-Is Set of (2) 30 mW green Cad-Pro LAP Lasers. Includes mounting brackets, distribution box, projector cables, remote control, and all available system hardware and instructions. 30 mW lasers are better suited to Canadian facilities, but could work in a US location with some additional steps due to regulations. $39,890 FOB BC Wood Tech Systems 765-751-9990 www.woodtechsystems.com
Stories and posts on the truss and components industry Let us know if you would like to contribute to this online forum
The
JobLine.com
Truss Design Skills Evaluation
Price based on configuration
Measures 9 areas of Skills and Experience Compairs Results to National Averages Identify Strengths and Areas For Improvement theJobLine.com, inc.
NEW!
Company: Name: Tools: Notes
Available On-Line
Test Date:
JobLine Sample Candidate
National Average: Years of Experience
MiTek, Construction Master
National Average: Score as of 12/19/2019
Candidate Score:
90%
PHONE: 800-289-5627
www.woodtechsystems.com
$145 per Exam
93% 87%
86%
84% 81%
79%
(Volume Discounts Available)
86%
81% 80%
82%
Truss
Math
81%
82% 81%
Design
Layout
74%
70%
765-751-9990
81.1%
100%
88%
New Wescana roof finish roller presses, available in either a 14ft or 16-ft throat models. Travel speed of 2-ft per second. Both models feature 24″ diameter steel rolls with 3 1/2″ diameter shafts with baffles, (2) 5-horsepower drive gear motors with controlled motor drive systems for starting and stopping, along with taperlock sprockets, sealed flange roller bearings and reversing magnetic starters.. Includes safety shutoff bars, electric eyes, amber running light, red reversing light with buzzer, and e-stop module. 240 / 480 /575 volt, 3 phase electrical required.
84.4% 13.73
Truss Design Skills Evaluation Version 8.0
80%
New Wescana Roof Finish Roller Press
05/15/20
60% 55%
50% 40% 30% 20%
Overall
Basic
Inter. Candidate
0-60% - 2.85 60-70% - 4.79 70-80% - 6.26 80-90% - 8.09 90-100% - 11.13
03:21 02:52 02:24 01:55 01:26 00:57 00:28 00:00
03:00
National Average
Score = Avg. Years Exp.
Speed
Time
Adv.
02:32
Years Exp. Ver 7.0
16.0
Blue = Candidate | Red = National Avg.
14.0 13.7
12.0 10.0 8.0 6.0
Copyright 2019 - the The JobLine,.com Inc. Phone 800-289-5627 Fax 800-524-4982 No portion of this material can be copied, duplicated or used in any way with out written
4.0 2.0 0.0
5.0
4.9 0.00 2.4
0.00
Test your design team to have a better understanding of individual strengths and areas for improvement. Use your team's results to measure potential new hires!
For Additional Information email: twm@thejobline.com
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #98
Designer Hiring Blues in the Summer
Thomas McAnally TheJobLine.com Hiring-Zone.com The Advertiser
I
t’s August. The heat is relentless, the humidity unforgiving, and your design team is running as hot as a NASCAR pit crew in Alabama. Project timelines are tight, customer expectations are high, and every minute counts. So when someone suggests bringing in a new designer, it can feel like tossing another log on a blazing fire. Sure, your team needs help—but adding a new hire during peak season can create more stress before it relieves any.
Hiring a designer at any time of year comes with its own headaches. But during the summer, those headaches become migraines. First, there’s the administrative maze. You’ve got to post the job, vet resumes, schedule interviews, run reference checks, and coordinate background screenings. Some companies even require physical exams or credit checks depending on the nature of the work. HR may handle most of this, but it still takes time, attention, and coordination—resources already stretched thin when the summer rush hits. Once you’ve finally found a candidate you’re excited about, the real work begins: onboarding. Getting someone into the system is just the beginning. You’ve got to physically (or virtually) set them up. That means ordering a computer with the right specs, making sure software licenses are in place, configuring access to shared drives, setting up VPNs or remote desktop access, and getting them connected to your design software—often through complex setups tied to company-specific infrastructure. In some companies, an IT department handles this. In others, it falls to the Design Manager, an unlucky team lead, or whichever designer happens to answer the phone when the new hire calls in. None of these people have time to spare, especially during the summer production crunch. What seems like a straightforward task—getting someone a working system—can quickly become a time-sucking distraction. Let’s say the technology setup goes smoothly (though it rarely does). The next hurdle is orientation and training. Even seasoned designers need time to understand your systems, your workflows, your naming conventions, and how your team communicates. In a perfect world, you’d have a structured onboarding process with training modules, documentation, and a dedicated mentor. But many companies still rely on informal onboarding—“shadow this person for a day and ask questions when you’re stuck”—which often leaves new hires overwhelmed and disengaged. This puts pressure on your experienced team members, who are already juggling deadlines and client calls. When they’re asked to pause and mentor a new hire, productivity takes a hit. It’s not that they don’t want to help—it’s just that the timing couldn’t be worse. The summer workload doesn’t pause for onboarding.
Continued next page
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #99
And if there’s no clear onboarding structure or assigned support system, things unravel fast. The new designer may feel unsupported or confused about expectations. Mistakes happen. Questions go unanswered. Frustration builds. In some cases, that new hire starts updating their resume before the first week is over. That’s why companies that succeed with summer hiring have one thing in common: preparation. They treat onboarding like a mission-critical process, not an afterthought. They invest in repeatable systems, delegate tasks clearly, and empower a team—formal or not—to guide the new hire from day one through full productivity. Designers are the engine of your operation. And in summer, you need every piston firing smoothly. Hiring can still happen—but only if it’s treated as a coordinated effort, like a NASCAR pit crew, not a last-minute scramble. Otherwise, you’re just adding more fuel to the fire—and risking burnout, turnover, or both. The bottom line? If you’re bringing on new talent in the heat of the summer, you better have a plan. Because even the best new designer won’t help if your onboarding process drives them away before they ever get up to speed.
JobLine.COM
The
Representing Employers Representing Employers and and Industry Industry Professionals Professionals for Over for Over 30 30 Years Years www.thejobline.com || info@thejobline.com www.thejobline.com info@thejobline.com || 800-289-5627 800-289-5627
Strictly Confidential!
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
HUNDEGGER lnnovationen fur den Holzbau
HUNDEGGER
_,...,_,
Hundegger leads the way in automation innovation for the truss component industry. Our advanced CAMBIUM software offers cutting-edge automation and digitalization solutions, revolutionizing operations, boosting productivity, and driving sustainable growth for manufacturers like you.
We go beyond standard mechanization; we champion true
Automation. The Hundegger TD-II isn't just a saw-it's a
REVOLUTIONIZE YOUR TRUSS MANUFACTURING WITH THE HUNDEGGER TD-II
transformative, comprehensive solution designed to streamline your production process. From retrieving lumber to optimizing, nesting, stacking, destacking, sorting, buffering, and precise delivery, our system ensures peak efficiency and productivity, tailored specifically to truss component manufacturing.
Harness the power of data with Hundegger's advanced CAMBIUM TACTICAL software. It meticulously tracks and optimizes your production, ensuring more automated operations and significant productivity gains. We provide state-of-the-art automation and control solutions that set the industry standard. Our focus on industrial automation and robotics positions Hundegger as the leader in enhancing performance and efficiency in truss component manufacturing and beyond. Hundegger products are essential for future-proofing your business. Elevate your productivity and secure your competitive edge with our advanced technologies and automation solutions, meticulously designed to meet the unique demands of component manufacturers today and tomorrow.
Don't get left behind. Invest in the future with true automation from Hundegger and see your business thrive.
om .
.
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
August 2025 #17313 Page #101
Adverti$$er
WANTED $32-45hr.
TruStance Portable Field Repair Press
Plus Bonus Plus Benefits D.O.E
S R E N G I S DE S S TRU Full Time
NEW!
rid
Hyb
e
ffic
This is the first, self-contained, truly portable repair unit used to press metal truss plates into dimensional lumber at virtually any location. Wood component (roof and floor truss) manufacturers, as well as builders, frequently require a tool to repair metal plate connected, wood truss components. The complete unit is mounted to a wagon built from square tubular steel. Extremely compact at only 28” wide and about 32” long the wagon features four wheels on soft-rubber solid tires, and a steering axle on the front with a handle that makes the unit easily maneuverable. The wagon contains the hydraulic power unit and an area for a portable gas generator. A rack in the back securely stores the C clamp, a standard 25′ hydraulic hose, and an electric power-supply cable. The clamp is manufactured from T1 steel, cut into a C-shape with a steel tube welded to the front that securely holds the hydraulic cylinder. Pressing is easily performed with a 4×4 magnetized steel platen that holds and presses the truss connecter plates. The C-clamp that weighs less than 30 pounds, features a throat that opens to 4-1/2” inches to accept either 4 x 2 or 2 x 4 lumber. It has a push on and release off switch to cycle the unit. A 10,000-psi electric-overhydraulic power unit pumps hydraulic fluid through a 10,000-psi hose to activate a 10-ton hydraulic cylinder with a 3.9 inch stroke. The unit can be powered by 120v electric power or an optional 120v, 2200-amp (output), gasoline powered Honda generator, which can also act as a portable power supply out in the field for other singlephase equipment. • Pressing Capability: 4.5” throat opening presses 2×4 through 4×2, includes a standard 25-foot, HD 10,000 PSI hose, with a 10 TON, 4”x4” magnetized pressing platen. • Electric/Hydraulic: SPX Hydraulic Technologies – Rockford, IL USA 10,000 PSI / 700 BAR. 10 ton pressing capability • Power Source: The unit is powered by a standard 120v/15 amp electric power or an optional 120v, gasoline powered Honda generator with 2200-watt output capability, which can also act as a portable power supply for other single-phase equipment. • Warranty: One year from date of purchase on manufactured unit, OEM warranties on hydraulic and optional gas motor
$9,800 FOB MT 765-751-9990 PHONE: 800-289-5627
www.woodtechsystems.com
ote
In-O
Rem
Part Time
Let The JobLine Represent You! We Search our Large Network of Clients Throughout the US and Canada To Find Your Perfect Job
Strictly Confidential! See Our Job Postings at www.thejobline.com
Equipment Wanted! Saws
Trucks & Trailers
• Automated Component & Linear Saws (2010 & Newer) • Monet DeSauw or TimberMill Manual Component Saws • Floor Web Saws • Spida (Apollo) Saws with Truss Automation • Bunk Cutters
Modular Equipment
• Stretch Roll-Off Trailers • Gooseneck Roll-Off Trailers • Pacific Automation or MiTek Mobile Home Press
Truss Equipment
Contact Wasserman & • Roller Gantry & Hydraulic Associates for a Fair Market Press Systems Value Assessment of your • Finish Rollers Used Equipment • Truss Stackers • • • •
Floor Truss Machines Lumber Splicers Jack Tables C-Clamp Presses
Operational, Needs Work, and Parts Only equipment will be considered!
800-382-0329 | www.wasserman-associates.com
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
THE MOST
TRUSSED NAME IN LUMBER
Why do so many manufacturers rely on West Fraser for mechanically graded lumber? With over 30 North American mills, 14 of which produce MSR, we run a highly dependable supply chain in both SYP and SPF. Our ability to identify higher grade lumber imparts predictable strength and consistency to high-performing trusses and other products. Why not let our high production standards support yours?
Truss us – we won’t let you down.
STRENGTHINLUMBER.COM
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
August 2025 #17313 Page #103
Adverti$$er
2003 Klaisler Roller Gantry System
Pricteion! c Redu
• Klaisler Model GR1424 Gantry Roller • Recessed Floor Mounted Rail • (5) 6' x 14' WEG-IT Tables with Ejectors • 460 Volt / 3 Phase • Excludes: Inside E x i t i n g C o n v e y o r, Finish Roller & Outside Conveyor • Price in US Dollars
$65,000 NOW $60,000 FOB Newfoundland 800-382-0329 | www.wasserman-associates.com The
JobLine.com Senior Truss Designer Rocky Mountains
J15342 Come live in this mountain resort community. The employer needs an on-site truss designer and will pay $70-150k based on experience, skills, and ability. They prefer a candidate with MiTek software experience and help candidates with relocation and housing assistance if needed. They are a single-location, privately owned company that prefers a team closely connected to the community over everyone working remotely. However, a resort community has it's benefits and challenges,and the employer helps ensure their people are safe, secure, and happy.
The
JobLine.com
Truss Design Skills Evaluation $145.00 Measures 9 areas of Skills and Experience Compare Results to National Averages Identify Strengths and Areas For Improvement
Available On-Line Test your design team to have a better understanding of your department strengths and areas for improvement.
Use your team's results to measure against potential new hires!
For Additional Information 800-289-JOBS PHONE: 800-289-5627
www.thejobline.com
email: twm@thejobline.com
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #104
Design Connections
Geordie Secord, Senior Recruiter TheJobLine.com – Canada
Onboarding Designers: What They Really Need to Know
W
hen a new designer comes on board—especially one with experience—there’s a good chance the onboarding process involves setting up their computer, pointing them to the right network folders, handing them a relatively simple job, and giving them a vague suggestion to “jump in” and call Joe, Sally, Roger, or whoever might answer if they run into trouble. Even with over 40 years in this business, I know there’s a long list of things I need to learn to properly mesh with how a new truss company operates. And with that experience, I’m not afraid to ask a bunch of questions—because I know they’re valid. But what about a designer with just a few years under their belt? Will they feel comfortable speaking up? Or will they assume their new employer expects them to already know everything? After all, they did say they were experienced, right? The same challenges probably exist within your current design team. Some may have been trained entirely in-house, which means they’re 100% convinced your way is the only right way. That might be true—or not. But is everyone really doing things the same way? Or at least close enough? You can help new hires feel more confident—and save everyone a lot of frustration—by putting together a guide that outlines key information and company preferences. Ideally, this guide would cover dozens of topics, but here are a few areas I think are especially important, and why they should be communicated early on. Local terminology Even now, I occasionally hear a term in the truss world that’s new to me. I’ve worked for five different truss companies and collaborated with at least 50 or 60 more from across North America while training designers. You can’t assume that just because someone is experienced, they know your lingo—especially if they’ve relocated to join your team.
Continued next page
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #105
Building codes and local requirements Make sure your new hire knows which building codes apply in your area(s). Does your company go beyond code minimums as part of your quality standards? Also, what does your local market expect? For example, are gables dropped all the time, some of the time, or never? Are hips framed Atlantic-style, Midwest-style, California-style? Truss layout information What details must appear on your layouts? And, just as importantly, what should be left off? Truss configuration Do you have preferences for webbing arrangements or chord sizes? Do you always—or never—want a king post? Do all trusses over a certain length require 2x6 chords? Truss labeling and file naming If your truss software doesn’t automatically label everything exactly how you and your clients want (and let’s be honest, none of them really do), what’s your system for making truss placement clear to the folks on site? How do you name job files, layout files, etc., and where should they be stored? Of course, all the above is just scratching the surface. I know that if I were starting a new job as a designer, I would likely fire a hundred questions at my new supervisor or team member. At this stage in my career and experience, I understand that there is more than one “right” way to do almost every part of a truss designer’s job, and I’m comfortable asking for more information when things aren’t as clear as they should be. Your new hire or even your existing staff may not be as comfortable asking those questions. You can help yourself and them by compiling a list of what is important to your company and your clients. If you’ve got ideas or experiences of your own, I’d love to hear them. What information do you think is essential for helping new designers hit the ground running? Feel free to reach out and share your thoughts—I’m always looking to improve the way we bring people into this industry.
If you want help finding that next perfect component designer or design job in Canada, please contact me. If your work is in the mass timber world anywhere in North America, I’d love to talk to you about connecting you to that next great job or candidate. You can reach me at secord@ thejobline.com, or 800-289-5627 ext. 2. I’m also happy to engage at: LinkedIn.com/in/geordiesecord www.thejobline.com
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
Wasserman & Associates Framing Table With Panel Bridge
One Ta
ble Sys
-Laser Pointer -Bridge Auto Return -Bridge Tilt at Sheathing Seams -Programmable Fastener Patterns -Pop-Up Skatewheel Conveyors -6’-11” to 12’-5” Wall Heights -Fixed Squaring Stops -No Floor Rails
tem $9 6,900
*Inclu des Ins t h e United tallation Sup Wasserman & Associates p States & Can ort in 2341 Shepard Rd ada Milford NE 68405 Phone: 800-382-0329 Web: www.wasserman-associates.com
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #107
2020 Spida Wall Panel Equipment
Pricteion! c u d e R
WALL EXTRUDER
CURVED CONVEYOR
• Wall Lengths to 20' / 6' to 12' Wall Heights • Length Stops Position the Top & Bottom Plates for Nailing (as directed by Wall Panel Design Software output) • Touch Screen Computer/Enclosure • 4 Everwin PN80PAL Coil Feed Nail Guns
WALL EXTRUDER OUTFEED CONVEYOR • Transfers Wall Panels from the Wall Extruder to the Squaring Table
STUD EXTRUDER • Nail C, L, U Sub-Assemblies and Double/Triple Studs
• Transfer Sub-Assemblies & Studs to the Wall Extruder Operator
SQUARING TABLE • Squaring the Wall Panel before attaching Sheathing
Excludes: Installation/Training and Annual Technical Support Fee EQUIPMENT FINANCING available from Fidelity Leasing
$249,000 NOW $235,000 FOB AZ
• Touch Screen Computer/Enclosure
• 2 Everwin PN80PAL Coil Feed Nail Guns
Buy Factory Direct From Wasserman & Associates at the same price as the Manufacturer, and get the added support and care you need to be up and running FAST! WE’LL EVEN HELP SELL YOUR USED EQUIPMENT TOO!
800-382-0329 | www.wasserman-associates.com PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
Consider the
BENEFITS of Membership
The MSR Lumber Producers Council (MSRLPC) represents the interests of machine stress rated lumber producers in the manufacturing, marketing, promotion, utilization, and technical aspects of MSR and MEL lumber. Suppliers, customers, and professionals may join as Associate members to enjoy:
• Online Marketing • Networking Opportunities • Reliable Market Data • Education “There is no question that the MSR Lumber Producers Council meetings are worth your time to attend. The information you will receive from the guest speakers and members of the Council is unparalleled!” —Sean Kelly, Automated Products Inc.
LEARN MORE & JOIN AT:
msrlumber.org/about
Continued next page
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
August 2025 #17313 Page #109
Adverti$$er
Every Truss Part You Need
ALL IN ONE PLACE with the Best Prices! From essential components to custom solutions, we’ve got everything you need to build trusses with precision and confidence. Our inventory includes parts for all leading truss jigging tables, OEM replacements, and custom components tailored to your needs. Choose from high-quality materials in custom lengths and widths, including durable plastic, unistrut, and steel. We work with a nationwide vendor network, ensuring fast delivery. Don’t waste time searching – call us first to keep your projects on track.
Your One-Stop
TRUSS PART SHOP
JIGGING & FASTENING OEM REPLACEMENT PARTS 863 602 2019 info@trussbuilderparts.com www.trussbuilderparts.com 2810 Parkway St. Unit 4 Lakeland, FL 33811
● ● ●
PlanSwift Lumber & Bldg Mat Takeoffs Truss & Wall Panel Design Staff EWP Layouts and much more!
www.AllPoints.Tech
Dave Walstad - Panama City Beach, FL
Cell - 941-713-4395
Dave.AllPoints@gmail.com
PHONE: 800-289-5627
Your Solution for Lack of Technical Staff Eliminate your lack of technical resources to grow sales and increase the clock speed of your company. We have the network and experience you can count on. Deploy Technical Teams from All Points!
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
ON THE ROAD TO GREATER ACCURACY AND PRODUCTIVITY, CONSIDER THIS A GREEN LIGHT. To see meaningful labor savings, quality improvement and production gains, SL Lasers with their easy-to-see green light are nothing short of illuminating. They enhance worker accuracy and productivity, regardless of experience or primary language. They can reduce tedious setup time by up to 70%. No complex training or costly service agreements are required. And SL Lasers integrate seamlessly with any component design software and are quickly installed over existing equipment.
We’ve been trailblazers in wood component laser projection since its very beginning, and we’re still delivering more rapid ROI for roof truss, wall and floor panel producers every day. Contact our enlightening team at Wood Tech Systems to see how SL Laser can deliver for you.
765-751-9990 www.woodtechsystems.com ProDirector7, the world's fastest laser, is now ever faster and more accurate. Images move much smoother from this new, compact design for all wood component applications. Faster and brighter results and even greater productivity.
Wood Tech Systems is a registered trade name of Wood Truss Systems, Inc.
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #111
Development Begins on ANSI/TPI 2 and ANSI/TPI 3 for the Truss Industry By Jay P. Jones, P.E. Executive Director, TPI
T
he ANSI/TPI 1 standard is a critical document that governs the design and quality criteria for metal plate-connected (MPC) wood trusses. It serves as a guideline for truss manufacturers and engineers alike, providing the technical framework to design and construct reliable and code-compliant trusses used in residential, commercial, and industrial buildings.
Now, the Truss Plate Institute (TPI), the nationally recognized leader in MPC wood truss engineering standards, has officially initiated the ANSI-accredited consensus process to develop two new American National Standards: •
TPI 2 – National Standard for Structural Testing of Metal Plate Connected Wood Trusses
•
TPI 3 – National Design Standard for Bracing Metal Plate Connected Wood Trusses
The new TPI 2 standard will establish procedures for testing and evaluating MPC wood trusses for four distinct objectives: (1) determining truss stiffness, (2) testing for design confirmation, (3) establishing design capacities, and (4) assessing deflection recovery performance. The standard will outline methods for conducting each type of test and provide guidance on interpreting and applying the results to support design validation, product evaluation, and quality assurance. The new TPI 3 standard will establish design requirements and methods for both permanent and temporary bracing of MPC wood trusses. It will build upon and ultimately replace the current industry standard known as DSB – National Design Standard for Bracing Metal Plate Connected Wood Trusses. The TPI 3 standard will focus on engineering-based bracing design practices applicable to building designers, truss engineers, and structural engineers of record. TPI is now accepting applications from interested individuals who wish to serve on the TPI 2 and TPI 3 Project Committees. Stakeholders directly and materially affected by the content of the proposed standards are encouraged to apply. Application forms and additional information about the project are available on the TPI website at www.tpinst.org. The development of TPI 2 and TPI 3 will follow TPI’s Project Committee Method for Achieving Consensus (PCMAC), an ANSI-accredited process that ensures balanced participation and transparency. The resulting standards are anticipated to eventually be referenced by the International Building Code (IBC) and serve as resources for the MPC wood truss industry. For more information or to request an application, contact the Truss Plate Institute directly.
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
The Industry-Leading Manufacturer of Wall Panel and Floor Cassette Systems.
SINGLE TOOL WOOD
CALL US TODAY FOR CUSTOM-SIZED BUILDS 1-866-726-7587 | WWW.PANPLUS.COM
WALL SHEATHING MACHINE This machine is designed to fasten Sheathing to wall panels made from 2x4 to 2x10, dimensional and engineered lumber. The wall panel is rolled into the sheathing machine from the Framer or Squaring table and clamped to ensure the wall panel is square. The operator then uses the bridge to fasten the sheathing to the wall. The design concepts used in the single tool bridge are based on that of the multi tool bridge which has been in production for many years. The advantages of the single tool over the multiple tool bridge are more flexibility in the fastener spacing both in the field, on seams, and while stitching the top and bottom plates, fewer tools to maintain.
Features:
Options:
• Touchscreen & Joystick operation
• Single tool beam with plate stitchers
• One touch preset buttons for nail spacing
• Dual beam single tool
and wall height
• Multiple screw tool bridge
• Servo driven system
• 16’4” x 16’ length
• Nail spacing accuracy
• Custom lengths available
• Table clamping controls on both ends • 12’4” x 16’ length
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
PANEL EQUIPMENT
Pricteion! c Redu
2007 VIKING 16' X 12' SQUARING TABLE WITH SHEATHING BRIDGE • 16' x 12' Squaring Table with Powered Width Adjustment & Powered Chain Conveyor • Wall Panel Lengths up to 16', Wall Panel Heights from 4'-0" to 12'-2" • Swing Gates at Both Ends of Squaring Table • Automated Field & Edge Nailing Driving by Panel Pro Event Software & Your Programmed Nailing Patterns • Simple Touchscreen Controls • 2 Tool Carriages for Sheathing Nailing with Tilt Function for Seams • 2 Paslode Nail Guns with High Load Coil Tray • Auto Sheathing Bridge Return • Includes 4 Pallets of Magnum Coil Nails (2 3/8 x .113) • 480 Volt / 3 Phase $29,900 FOB KS. Wasserman & Associates 800-382-0329 www.wasserman-associates.com
August 2025 #17313 Page #113
Adverti$$er
A
The
Component Manufacturing dverti$er
Serving the Structural Building Components Industry
2022 Prairie Mechatronics 12' Portable Sheathing Bridge • Programmable Fastener Spacing with PLC Touch Pad Entry • One Touch Selection for Field or Seam Pattern • Gun Tilt at Sheathing Seams • Laser Pointer for Stud Location • Sensors to Detect Sheathing • Nail/Staple 8' Wall in 6 to 8 Seconds • Quick Tool Changeout • Weight: 150 Lbs • Extra Gun Mounts & Spare Parts • Excludes Nail or Staple Guns • 120 Volt / 1 Phase • Includes Custom Pneumatic Supports (adjustable from 35" to 47" above floor) • 1 Available at $18,500 NOW $14,500 Each Wasserman & Associates 800-382-0329 www.wasserman-associates.com
Presents
Truss Tales Stories and posts on the truss and components industry Let us know if you would like to contribute to this online forum
Used Panels Plus Wall Panel Lift • Two available at $1,175 Each Wasserman & Associates 800-382-0329 www.wasserman-associates.com
A
Th e
2020 Panels Plus Framing Station
Component Manufacturing dverti$er
Serving the Structural Building Components Industry
Like Money in the Bank. Service you can count on!
Model 55000 Framing Station frames walls from 4′-6″ to 12′-3″ and lengths up to 16′ utilizing 2×4 through 2×10 material. Features include a squaring edge, color-coded stud locators, adjustable vertical plate supports, pop-up rollers with footswitch activation, and push-button controls for remote operation of pop-up conveyor and motorized clamping and wall heightadjustment. System includes tool carriages with (4) Paslode F350S PowerMaster Plus, long-stick nailers attached to each side of the framing table. This semi-automated system fastens the top and bottom plate studs and subcomponents with the press of a fire button. The indexing tool carriages offer precise fastener placement taking the tools out of the operators’ hands. Also includes two pairs of 15′ skate-wheel, infeed/outfeed conveyors, Panel Lift (no hoist), and P+ Handle-Bar Router Features a built-in air-reserve tank. 120 PSI dry air required. 120v / 1Ph / 60Hz / 13.5 Amp electrical required.
$74,899 FOB FL 765-751-9990
PHONE: 800-289-5627
Read Now
Read/Subscribe online at www.componentadvertiser.com
www.woodtechsystems.com FAX: 800-524-4982
Now Available! Component Warning Notice Tags Component manufacturers have a duty to warn installers about the safety risks associated with the handling and installation of trusses and components.
To help component manufacturers in their duty to warn, SBCA has created the Component Warning Notice (CWN) and corresponding website: componentwarningnotice.com.
In addition to the Component Warning Notice Sheet being included in every standard SBCA Jobsite Package, SBCA has created a Component Warning Notice Tag to direct installers to the important information contained on the website. Visit pubs.sbcacomponents.com to order today.
Learn more about the Component Warning Notice at sbcacomponents.com/CWN
Unlike other SBCA tags, which are typically applied to trusses and components under certain circumstances, the CWN Tag is intended for application on every truss and component sent to a jobsite.
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #115
Fitzgerald Group, LLC Equipment Wanted! Saws • Automated Component & Linear Saws (2010 & Newer) • Monet DeSauw or TimberMill Manual Component Saws • Floor Web Saws • Spida (Apollo) Saws with Truss Automation • Bunk Cutters
Truss Equipment
• Roller Gantry & Hydraulic Press Systems • Finish Rollers • Truss Stackers • Floor Truss Machines • Lumber Splicers • Jack Tables • C-Clamp Presses
Trucks & Trailers
• Stretch Roll-Off Trailers • Gooseneck Roll-Off Trailers
Modular Equipment • Pacific Automation or MiTek Mobile Home Press
Contact Wasserman & Associates for a Fair Market Value Assessment of your Used Equipment Operational, Needs Work, and Parts Only equipment will be considered!
800-382-0329 | www.wasserman-associates.com
a blending of excellent services and products, with answers that work...!© Not producing the results you need or want – getting conflicting info about what to do and the equipment and the systems you may need?
Before you Buy - Ask yourself – do I need a salesman or a guide? If you want an Independent Guide that has your bottom-line results as the #1 priority, Call Me. If the salesman will do - we'll talk later... Also, don't let Financing Deals influence your best solution. FitzGroup can arrange – Zero down & No payments for 90 Days! Please be assured that your investment with any of our selected partners will not cost one penny more with the Fitzgerald Group as your purchasing contact. In addition, you will receive the full advantage of our Partner Relationships and Services NOT offered elsewhere.
RFitzgerald@FitzGroup.com 719.528.5445
DUAL BEAM SHEATHING OPTION
www.FitzGroup.com
CALL US TODAY FOR CUSTOM-SIZED BUILDS 1-866-726-7587 | WWW.PANPLUS.COM
The Dual Beam Sheathing option on our Single Tool Wood Sheathing Machine adds the ability to have two different fasteners operating at the flip of a switch.
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #116
Bringing Innovation to the Forefront of the Construction Industry
By MiTek Staff
T
oday’s construction industry is governed by a complex network of building codes and standards. In the U.S., the development cycle for new building codes spans three years, while the creation of new standards may take even longer. As a result, adoption and acceptance of innovative, cutting-edge building materials can be slow. Fortunately, the International Code Council (ICC) I-Codes include a pathway for recognizing alternative building products through product evaluation reports. While the code official must approve product evaluation reports, they can significantly accelerate the process of bringing new building materials to market. Previously addressed in Sections 104.11 and R104.11 of earlier editions of the International Building Code® (IBC) and International Residential Code® (IRC), the 2024 IBC and IRC now cover these provisions in Sections 104.2.3 and R104.2.2. These code provisions address alternative materials, designs, construction methods, and equipment. They also outline the approval authority, application process, and evaluation criteria— such as compliance with the intent of the code, equivalency in performance, required testing, reporting, and peer review. The administrative requirements create a framework for evaluating new building products and determining whether they meet code requirements and intent.
Building Codes and Standards – A Strong Foundation U.S. building codes are developed by the International Code Council (ICC) and published as the I-Codes. The most widely used I-Code volumes are the IBC and IRC, which include performancebased and prescriptive requirements for the design and construction of buildings and one- and two-family dwellings, respectively. The most current editions of the IBC and IRC are 2024, but development of the 2027 editions is underway. Some jurisdictions and building departments have already adopted the 2024 I-Codes in some form, including the states of Colorado, Mississippi, Wyoming, the cities of Phoenix, Arizona, Reno and Las Vegas, Nevada, Austin and San Antonio, Texas, and the U.S. General Services Administration. More jurisdictions and building departments are expected to adopt the latest I-Codes as time moves on.
Continued next page
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #117
The I-Codes reference hundreds of standards developed by Standards Development Organizations (SDOs). The referenced standards provide detailed design provisions and testing methods specific to various building materials. Including standards by reference keeps the building codes from becoming unmanageably long. The IBC lists referenced standards in Chapter 35, and the IRC in Chapter 44. Major SDOs include ASTM International (formerly the American Society for Testing and Materials), the American Wood Council (AWC), the American Institute of Steel Construction (AISC), the American Concrete Institute (ACI), the American Society of Civil Engineers (ASCE), and the Truss Plate Institute (TPI). These organizations follow consensus-based processes to develop their standards. Once finalized and approved by committees, the standards may be adopted into the I-Codes through the code change process administered by ICC committees, including public review and comment. Building products may also be evaluated directly to code referenced standards and documented through listings rather than product evaluation reports.
Acceptance Criteria – Tools for Rigorous Evaluation Before a product evaluation report can be issued, an ISO 17065-accredited certification body first develops Acceptance Criteria. Although not considered standards, criteria create a fair and consistent basis for product evaluation or a “level playing field.” Certification bodies involved in this process primarily include ICC Evaluation Service (ICC-ES) and IAPMO Uniform Evaluation Service (UES). Acceptance Criteria are developed by the certification body through a transparent process that involves input from the public, code officials, design professionals, and product manufacturers. A committee of code officials hears the criteria proposals and then votes for approval, disapproval, or further study. Future criteria proposals may be made for technical and administrative revisions such as updating referenced codes and standards. This collaborative effort is focused on establishing whether novel building materials are equivalent in quality, strength, effectiveness, durability, safety, and fire resistance to what is already referenced in codes and standards. Some notable ICC-ES Acceptance Criteria related to wood construction include AC13 Joist Hangers and Similar Devices, AC116 Nails, AC155 Hold-downs (Tie-downs) Attached to Wood Members, AC233 Dowel-Type Threaded Fasteners Used in Wood, AC257 Corrosion-resistant Fasteners and Evaluation of Corrosion Effects on Wood Treatments, AC283 Metal Hinge Plate Connectors for Wood Trusses, and AC387 Metal Webs for Parallel Chord Wood Trusses, amongst others.
Continued next page
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #118
ICC-ES Acceptance Criteria include an Introduction, Purpose and Scope, Codes and Referenced Standards, Basic Information and Test Reports, Test Methods and Performance Requirements, Analysis Requirements, Quality Control, Evaluation Report Requirements, and optional Environmental Product Declarations.
Product Evaluation Reports – Solving the Need for Speed Product evaluation reports offer an efficient and faster route for manufacturers to introduce innovative technologies into the construction market. Evaluation reports document compliance with codes, standards provisions, and Acceptance Criteria, offering assurance and peace of mind to code officials and builders alike. Evaluation reports are a mark of heavy investment made by manufacturers in research and development, engineering, manufacturing, and quality systems.
Continued next page
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #119
ICC-ES Evaluation Reports have a well-established structure that includes the Evaluation Scope, Product Uses, Product Description, Design and Installation, Conditions of Use, Evidence Submitted, Product Identification, and Technical Data including allowable load values, design strengths, figures, and details. Evaluation Reports may also include state and city code supplements referring to those building codes and specific requirements in the jurisdiction. MiTek product evaluation reports, state and city code supplements, product approvals, and environmental product declarations can be found at: Evaluation Reports – MiTek Residential Construction Industry.
Product evaluation reports are a strong indicator of a manufacturer’s research and development, engineering, manufacturing, and quality management systems. While developing a product evaluation report requires significant investment in time and money by the manufacturer, this alternative approval pathway plays a pivotal role in advancing construction innovation. Product evaluation reports empower code officials to confidently approve new technologies, helping modernize the industry while also ensuring the safety and well-being of the public who live, work, and play in the buildings we design and construct. For additional information, or if you have questions, please contact the MiTek Testing & Regulatory Compliance Team or the MiTek Engineering department.
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
IT’S NOT ONLY SMART AND INSPIRED, BUT LITERALLY UPLIFTING. Stacking wall panels at the end of your production line can be a real labor-intensive and safety-challenging task. But it doesn’t have to be now, thanks to ProStack. This innovative wall panel stacker literally stacks from the bottom up, reducing awkward overhead lifting & placement, and the risk of head injury. Plus, ProStack frees up at least one worker to return more productively to your core task—building wall panels. Enhanced worker safety and productivity is what ProStack is all about.
Setup and installation is easy too, without the need for complex training or disruption to workflow. So, free up your team to do what they do best, and you need to do most, and let ProStack stack your wall panels instead. Contact us to learn more today. For a ProStack demonstration video, scan the QR code below.
ProStack
By: DAK Automation
765-751-9990 www.woodtechsystems.com
Wood Tech Systems is a registered trade name of Wood Truss Systems, Inc.
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #121
Pricteion! c Redu
2017 Bradbury R-Stud Rollform Line $650,000 NOW $389,000 FOB OR • Model SRDE6.5 Stock Reel
• Roll Tooling
• Model RS35-4-12" Roller Straightener
• Beck Automation Controller
• Model FR5-12 Feed Roll
• Citronix CIJ Ink Jet Printer
• Hydraulic Press System with Three Feature Dies (36" Feeds)
• 3 5/8" and 6" R-Stud • Coil Inventory
• 22' Powered Entry Conveyor • Model 420 STR Rollformer (10 Forming Stations)
• Reference Uploaded PDF for Additonal Details & Layout
Buy Factory Direct From Wasserman & Associates at the same price as the Manufacturer, and get the added support and care you need to be up and running FAST! WE’LL EVEN HELP SELL YOUR USED EQUIPMENT TOO!
800-382-0329 | www.wasserman-associates.com PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
Flow Optimized. Output Maximized. Factory layouts built around your needs, today and tomorrow.
Let’s work together.
Your factory, our expertise.
E sales@spida.com
T +1 866 647 7771
spida.com
Wasserman & Associates Wall Panel Line Accessories
t w en Ne ipm u Eq
nt ew me N ip u Eq
Wall Panel Lift * 8’- 12’ Wall Height * 1,000 LB Capacity * Easy Adjustment * Hoist and Crane Sold Separate
$1,950.00
Handle Bar Router * 8’ - 12’ Wall Height * 2 Person Operation * 3 ¼ hp Production Router * 120 Volt /1 Phase/15 Amp
$3,000.00
Lay-Up Tables * 10’ x 10’ Working Area * Lift & Extend Rollers * Squaring Lip * Nail Tray
$13,900.00
Skate Rollers * 15’ Standard Length * Adjustable Height * Sturdy Stands * Custom Lengths Available
$3,500.00
EST. 1991
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #124
Fastener Substitutions in Connectors — Where We Started and Where We Are By Paul McEntee
W
e often get questions about using fasteners different from those listed in a connector’s catalog load tables. A question came up recently, and I said, “I did a blog post about that not too long ago.” Turns out that blog post is over 10 years old, which no longer qualifies as “not too long ago.” The options we offer as alternative fasteners for our connectors have grown since that blog post, so I thought it was worth revisiting the topic. Nothing to do with fasteners, but I would be remiss not to mention that our first catalog in 1957 was four pages long. The first “Nail Conversion” table did not arrive until 37 years later, when we added this section to our 1994 Connectors catalog. A bit more about double-shear nails. We introduced double-shear nailing in 1984 with the HUS hangers and later created the LUS, HGUS and HHUS hangers to take advantage of this innovative feature. The Eighth Day of Christmas blog post from December of 2023 discussed the innovation of double-shear nailing. In straight-nailed hangers, the joist nails are important in securing the joist for uplift, but they don’t help increase the download capacity of a hanger. In double-shear hangers, dome holes angle the joist nails so they penetrate through the hanger, through the joist and into the header. This allows
Continued next page
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #125
both the hanger face nails and the joist nails to transfer load into the header, resulting in higher allowable loads. Double-shear nails need to be long enough to penetrate the header, so we required 10d common (0.148” x 3”) or 16d common (0.162” x 3 ½”) nails for double-shear nailing. Positive placement nailers are pneumatic tools that have a mechanism that helps locate the nail in the connector hole. Many of these tools are limited to 2 ½”long nails, so contractors wanted the option to use short nails in double-shear joist hangers. We created a separate technical bulletin that provided reduction factors for short nails in specific hanger models. We incorporated these reduction factors into the connector catalog to make sure the information was readily available. We also expanded the substitution options to include post caps and post bases based on new testing. Finally, we have StrongD r i v e ® S D C O N N E C TO R Screws, which we designed as a replacement for nails and which are awesome for people like me who aren’t good at driving nails. I’ll copy this portion about rim board fasteners from my previous blog post. The question of nail size also comes up when attaching hangers to rim board, which can range from 1” to 1 ¾” thick. The adjustment factors in C-C-2024 do not necessarily apply to rim board, which may be thinner than the length of the nails used. We have a technical bulletin for Hangers on Rim Board Headers
Continued next page
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #126
— T-C-RIMBDHGR. Most of the reduction factors are the same as those in the catalog, although some are lower based on reduced nail embedment in thinner materials. Testing of hangers with 10d x 1 ½” nails on 1” OSB or 1 ¼” LVL did not do as well, however. We observed that once the nails withdrew a little bit under load, they quickly lost capacity. For that reason, we recommend full length 10d or 16d nails on those thinner rim board types. Finally, how does Simpson Strong-Tie specify nails in our literature? Prior to 2019, we used penny size — 16d, 10d, 8d, 10d x 1 ½”, 8d x 1 ½”. Nails were common nails, unless noted otherwise. We recognized over time, though, that nail manufacturers most prominently identified their nails by diameter and length, often not listing the penny size at all. In our 2019 Wood Construction Connectors catalog, we therefore switched to specifying nails by diameter and length, which matches up with the nail labels you’ll see at the hardware store.
The article, Fastener Substitutions in Connectors — Where We Started and Where We Are, appeared first on Simpson Strong-Tie Structural Engineering Blog. To sign-up to receive the Engineering Blog in your inbox, go to seblog.strongtie.com/subscribe.
Copyright © 2025 Simpson Strong-Tie Company Inc. All Rights Reserved
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
August 2025 #17313 Page #127
Adverti$$er
PANEL EQUIPMENT
NEW!
New Component Table with Skatewheel Conveyors Lift & Extend Skatewheel Conveyors. 10' x 10' Work Area with Squaring Lip. Gun Holster & Nail Tray. $13,900 FOB NE Wasserman & Associates 800-382-0329 www.wasserman-associates.com
CLICK HERE for more information New Panels Plus Wall Panel Framing Equipment
• • • •
New Wall Panel Lift 8' to 12' Wall Heights 1,000 Lb Capacity Weight: 120 Lbs Excludes: Electric Hoist & Freestanding Bridge Crane $1,950 FOB NE Wasserman & Associates 800-382-0329 www.wasserman-associates.com
Consider Panels Plus wall panel assembly equipment for manufacturers of wood or steel wall panels, floor-panels, and related framing components. Panels Plus is an employee owned, ISO certified, manufacturing company that builds state-of-the-art equipment featuring durable construction, with fit and finish second to none in the structural building component industry. The referenced base framing table allows you to assemble from 7-12 foot wall heights, at industry standard 16 foot lengths, at a working height of 29 to 32 inches. This framer design includes controls at each end of table, squaring stops and pneumatic clamping for consistent wall panel quality. Frames 2x4 or 2 x 6 walls, with color-coded, steel stud locators at 16 and 24 inches O.C. spacing. Includes pop-up skate wheels for easy transfer of completed wall frame. Framing table can be configured to receive wall framing light bars, other options include custom buildable wall heights, lengths and auto-indexing of optional 2 or 3 tool carriages. Additionally from Panels Plus are sheathing tables with features that include foot pedal control at squaring end of table, with squaring stops, roller conveyors at both sides, single pendant controls for bridge, tool spacing at 6 inch centers with 3 inch bridge shift for offset nailing. Tool bridges can accommodate from 2 x 4 to 2 x 8 walls, with seam tilt being standard equipment Panels Plus Tool Bridges are available with single beam or dual beam design for two different tool mounts on one bridge. Squaring stations, sub-component tables, conveyors and panel lifts are also available to complete the configuration of the wall panel assembly line. Price includes factory installation and training. 50 CFM at 120 psi air. 120 or 230 volt, 1 phase electrical.
765-751-9990
ProStack Wall Panel Tilt In-Feed Conveyor Solving the problem of missed fasteners on exterior sheathing remains one of the primary reasons for call back charges and exceptions noted during jobsite building inspections. Clearly finding and resolving missed fasteners or “shiners” becomes mission critical before a sheathed wall panel leaves the production line. Our shop-proven, tilting conveyor makes the process safe, fast, and labor efficient. The ProStack tilt in-feed safely lifts wall segments to 45º in 5 seconds for inspection and on to 75º for easy to reach repairs. This tilt system is also excellent for installing blocking , windows, and other details in your wall panel segments. More information click here. 72,657 FOB ND
NEW!
765-751-9990
Video
PHONE: 800-289-5627
www.woodtechsystems.com
www.woodtechsystems.com
NEW! $37,525 FOB ND
ProStack Wall Panel In-Feed Conveyor ProStack powered in-feed conveyor was engineered to deliver wall panel segments at a matched speed and height into the ProStack automated wall panel stacker. Built for smooth operation and assembled with laser cut, powder-coated finish steel. Base model conveys wall panel segments up to 12’ in height and up to 16’ in length for wall segments up to 1,600 lbs. Extended length systems come in standard 20′ and 24’ length capacity. All models come with adjustable working heights and variable conveyor speeds. Powered in-feed conveyor section, synchronized chain drive under top and bottom plate for open access, 5-HP, 208v, 3Ph power. Adjustable working height from 28” to 34”. 16′ length capacity.
765-751-9990
Read/Subscribe online at www.componentadvertiser.com
www.woodtechsystems.com FAX: 800-524-4982
Intro duce Yo urs el f at the B oo t h : # 1 5 0 1
Watch it Sheath a Wall in under 2 MIN (in Plant Production)
There has never before been a Sheathing Bridge Like It!
YOUTUBE See it in action on
BCMC I sFRAMER uMM IT BUILDlflG C0llP0IIUII
\1AIIUFACTURERS CO�rERf)JCt
•
Put our 60+ years of experience to work for you!
Triad Machines
800-568-7423 ext. 133 www.TriadMachines.com
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #129
NEW!
New Panels Plus Combination Table
Price: $Call for pricing FOB: MN 765-751-9990
www.woodtechsystems.com
2021 Panels Plus LightGauge-Steel Framing Station
2007 Panels Plus Steel Wall Panel Sheathing Station $74,970 NOW $68,997 FOB MN 765-751-9990 PHONE: 800-289-5627
www.woodtechsystems.com
2021 Panels Plus light gauge steel (LGS) framing station, builds steel stud wall panels from 6′-9″ to 16′-0″ heights, from 1′-0″ to 20′-0″ long. Includes four (4) Graber SuperDrive tools with mounts, two tools per dolly, adjustable top and bottom plate stops, squaring stops and pop up conveyors. 110 volt, 1 phase, 30 Amp electrical required. 80 PSI at 10 CFM air required. $71,993 NOW $59,000 FOB PA
765-751-9990
Read/Subscribe online at www.componentadvertiser.com
www.woodtechsystems.com FAX: 800-524-4982
When it’s all about production… Think Ranger RS.
Three Ranger Retrieval Systems at the front of this plant feed three linear component saws, each equipped with automated conveyor systems to move parts to the tables.
Acer Inc. 301 Industrial Drive Rushford, MN 55971 507-864-2220 www.acerinc.com
RANGER RS is a trademark of ACER INC. The RANGER RS system is protected under U.S. Patent #8,960,244 and other patents pending.
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
August 2025 #17313 Page #131
Adverti$$er
New ProStack
Wall Panel Stacker
NEW!
NEW 12' X 16' FRAMING TABLE
• Pop-up Skatewheel Conveyor • Powered Height Adjustment (6'-11" to 12'-5" wall heights) • Fixed Squaring Stops • Excludes Tool Dollies • 110 Volt / 20 Amps • Add $6,000 for Stud Locators at 16" & 24" O.C. • Add $2,750 for 1 Pair of 15' Skatewheel Conveyor with Stands
• Add $11,900 for Sub-Component L a y u p Ta b l e s w i t h P o p - u p Skatewheel Conveyors • EQUIPMENT FINANCING available from SLS Financial Services
$38,750 FOB NE
800-382-0329 | www.wasserman-associates.com
2021 Panels Plus Light-Gauge-Steel Framing Station 2021 Panels Plus light gauge steel (LGS) framing station, builds steel stud wall panels from 6′-9″ to 12′-3″ heights, from 1′-0″ to 20′0″ long. includes four (4) Graber SuperDrive tools with mounts, two tools per dolly, adjustable top and bottom plate stops, squaring stops and pop up conveyors. 110 volt, 1 phase, 30 Amp electrical required. 80 PSI at 10 CFM air required.
$71,993 NOW $59,000 FOB PA
765-751-9990 PHONE: 800-289-5627
www.woodtechsystems.com
Call for Pricing FOB ND Reduced labor, increased safety, the benefits just keep stacking up. Stacking wall panels at the end of your production line can be a real labor-intensive and safety-challenging task. But it doesn’t have to be now, thanks to ProStack. This innovative wall panel stacker literally stacks from the bottom up, reducing awkward overhead lifting & placement, and the risk of head injury. Plus, ProStack frees up at least one worker to return more productively to your core task—building wall panels. Enhanced worker safety and productivity is what ProStack is all about. Developed for commercial wall panel production facilities this is the remarkable ProStack, fully automated wall panel stacker. The ProStackrelieves your build team from creating a stack of wall panels and keeps them building walls instead. Stacks 2×4 through 2×8 walls up to 20′ in length and up to 12′ in height (taller by special order). The ProStack will automatically center or left or right justify each layer including multiple wall segments on the same layer. For ease of loading in your yard or on the build site, fork pockets are created in two ways: The operator can attach blocking up to 5″ tall to the last wall of the stack prior to entering the stacker, or two shorter walls can be spread apart prior to the second to last row of the stacker. Designed without any overhead frame or apparatus, so no crane inspections are required. The ProStack is “event driven”, so there is no need to read a file. Setup and installation is easy too, without the need for complex training or disruption to workflow. So free up your team to do what they do best, and you need to do most, and let ProStack stack your wall panels instead. ProStack can even operate with your existing powered conveyors or select our optional matching conveyors (see the video shown below). 208 volt, 3 phase, 43 Amp base model electrical required. No air required. Footprint is 26′-5″L x 19′-3″W. For additional information Click Here
765-751-9990
Read/Subscribe online at www.componentadvertiser.com
Video
www.woodtechsystems.com FAX: 800-524-4982
Design and build faster than ever. From plans, to walls, to panels, and everything Learn more at EagleMetal.com
above. Introducing a new level of design tools, built from the ground up.
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
TRUCKS & TRAILERS
August 2025 #17313 Page #133
Adverti$$er
EXTENDABLE TRUSS TRAILERS
38’-53’, 42’-60’, 50’-70’ & 53’-80’ sizes available
2 YEAR WARRANTY
ALL TRAILERS NOW AVAILABLE WITH OPTIONAL GALVANIZED ROLLERS (Shown with Optional Headache Rack)
2022 Peterbilt 579 S/A Day Cab Truck #1 Paccar MX-13 / 12.9L / 405 HP Engine 249,300 Miles / 5,566 Engine Hours Auto Transmission Engine Brake 12,000 Lb Front Axle / 22,700 Lb Rear Axle / 34,700 Lb GVWR Air Trac Air Ride Suspension 148 Inch Wheelbase Dual Fuel Tanks Tires are Very Good $35,000 FOB PA Wasserman & Associates 800-382-0329 www.wasserman-associates.com
2016 Precision 50-70′ stretch roll off trailer Features sliding tandem axle, fifth wheel connection, locking rollers, ABS brakes, and hydraulic lift neck. This trailer does have a current DOT inspection. Estimated 50% tire tread remaining. $28,990 FOB WI Wood Tech Systems 765-751-9990 www.woodtechsystems.com
BUILDING EXCEPTIONAL QUALITY TRUSS TRAILERS IN THE U.S.A.
FOR OVER 20 YEARS
Scan the QR Code to take you directly to our website. For more information or to request a quote Call or Email: 1-800-237-5161 sales@precisionequipmfg.com
Pricteion! c e R du
2021 Big John Extendable Pole Truss Trailer Extendable pole trailer Used for 60' span roof trusses, peak down Retracted length - 35'. O.A. Extended length - 45' O.A. Adjustable 2' Increments Outer tube frame - 8" square tube Inner tube frame - 6" square tube Axles - (2) 25,000 LB Capacity Each Axle width -102" Anti-lock brake system Parking brakes on both axles Wheels - 10 stud outboard drums Tires - 11 R 22.5 radials Rims - 22.5 steel unimount (8) alum wheels Suspension - Watson air ride with dump valve Landing gear - 2 speed Bumper - standard Lights - DOT Specs, LED Package (2) truss stands (4) winches with straps $29,900 NOW $17,500 FOB SC Wasserman & Associates 800-382-0329 www.wasserman-associates.com
VALUE PACKAGED WITH PIN LOCKS, LOAD CONTROL, LED LIGHTS, STROBE LIGHTS & MORE!
1997 Lakeside JDH Trussmaster 36-51 ft Stretch Trailer (OR-1) 1997 Lakeside JDH Trussmaster 36′51′ – Lakeside trailer features 5th-wheel connection, sliding tandem axle, locking rollers and hydraulic lift neck. Current DOT inspection September 2023. 50% brakes and 50% tire tread remains. 26,000 GVWR $28,997 NOW $21,997 FOB MO Wood Tech Systems 765-751-9990 www.woodtechsystems.com
2019 Landoll 48-ft Roll-off Trailer
2019 Landoll 48′ Roll-off Trailer with Anti-lock Brake System (ABS), sliding tandem axles, spring suspension, rollers: Galvanized 6″ x 95 5/8″ tube, Rear 15 rollers @ 24″ O.C., front 6 rollers @ 36″ O.C. Hydraulic Lift neck with a Honda 13 h.p generator and onboard battery, Roller Locks: 2-Zone (front and rear) Air-powered, Controls: Mounted roadside at landing gear, galvanized 15″ dia. ground rollers, LED lighting, Straps: Sliding winches complete with straps to curb-side “J-hooks”, Air-powered fold-away Galvanized under-ride bumper, Mud Flaps behind tandem. Black powder-coated finish. Current DOT inspection as of 24 June ’25.
1996 ASI 42′ – 60′ Stretch Rolloff Trailer (1252) 1996 ASI stretch rolloff trailer, model T-24, stretches from 42′ to 60′, features tandem sliding axle, locking rollers, Hydraulic lift, ABS brakes, 50% brakes remaining, 50% tire tread remaining and lights working. 68,000# GVWR. Current DOT inspection in April ’25. $14,997 FOB GA Wood Tech Systems 765-751-9990 www.woodtechsystems.com Read/Subscribe online at www.componentadvertiser.com
800-382-0329 | www.wasserman-associates.com
PHONE: 800-289-5627
FAX: 800-524-4982
Valuable
WEBSITE Resources Visit msrlumber.org to find: • Sources for MSR Lumber
Filter by species, grade and dimension to locate products from MSRLPC members.
• Educational Resources
Find helpful information for current and potential MSR lumber users.
• NEW! Design Values Comparison Tool
Compare MSR lumber reference design values with visually graded dimensional lumber by species.
The MSRLPC website is a one-stop shop for lumber buyers looking to make informed purchasing decisions as well as those exploring design optimization with MSR Lumber. Check it out!
LEARN MORE AT:
msrlumber.org
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
August 2025 #17313 Page #135
Adverti$$er
TRUCKS & TRAILERS
Prices good through August 2025
PRECISION EQUIPMENT TRUSS TRAILER MANUFACTURING EW
N
IN-STOCK Truss Trailers for SALE
Due to manufacturing efficiency upgrades we have increased production and have various trailers with various options on our lot READY TO GO!
* Large Toolbox and/or Headache Rack can be added as Options Does NOT INCLUDE FET or Freight ² DOES NOT include Freight
1
EXTENDABLE TRUSS TRAILERS
1997 Lakeside JDH Trussmaster 48-ft Rolloff Trailer 1997 Lakeside JDH Trussmaster 48-ft rolloff trailer features 5th-wheel connection, sliding tandem axle, locking split rollers, and hydraulic lift neck. Current DOT inspection valid through 1 October 2025. 60% brakes remaining. Six tires at 50% tread remaining and two tires at 40% tread remaining. 68,000 GVWR. $11,997 NOW $8,9978 FOB IA As-is, Where-is Wood Tech Systems 765-751-9990 www.woodtechsystems.com
2014 Precision 48′ Roll Off Trailer (R157) 2014 Precision 48′ roll off trailer features tandem axle, fifth wheel connection, locking rollers, ABS brakes, and hydraulic lift neck. Estimated 50% tire tread remaining. $17,990 FOB WI Wood Tech Systems 765-751-9990 www.woodtechsystems.com
38’-53’ (T-1418) - No Options*- $65,6701 42’-60’ (T-1392) - Headache Rack, Large Toolbox - $71,2391
42’-60’ (T-1414)S- O NoLD Options* - $68,9701
42’-60’ (T-1416) - No Options* - $68,9701 42’-60’ (T-1415) - No Options* - $68,9701
50’-70’ (T-1277) Headache Rack, SOL- D Large Toolbox, Sliding Winches - $81,9591 50’-70’ (T-1346) - Headache Rack, Large Toolbox, Lift Axle - $76,7001 50’-70’ (T-1347) - No Options* - $76,7001 50’-70’ (T-1186) - Headache Rack, Large Toolbox - $78,3691 $76,369 (Demo)
50’-70’ (T-1377) - Headache Rack, Large Toolbox - $78,3691
1990 Wabash 48' - 77' Roll off trailer • Certified for highway • 70% rubber • New 5th wheel • Newer undercarriage • New rear bumper • New wiring • Annual inspection report completed on 9/19/24 - good for 1 year. Asking $19,500 NOW $17,500 M.P.B. Builders 920-748-2601 www.mpbbuilders.com
53’-80’ EXTENDABLE TRUSS TRAILER (T-1420)
Lift Axle Toolbox and Headache Rack - $83,9191
GOOSENECK TRUSS TRAILERS
32’ Gooseneck (T-1381) - Front Roller - $50,825² 32’ Gooseneck (T-1382) - No Options - $49,485² 36’ Gooseneck (T-1384) 12K Axles, Front Roller-$53,163² 36’ Gooseneck (T-1385) No Options - $50,515²
2004 Lakeside 42 to 60-ft Stretch Rolloff Trailer 2004 Lakeside 42-60′ stretch roll off trailer features hydraulic lift, locking rollers, sliding tandem, ABS brakes, and a fifth wheel neck. Six tires have 75% tread remaining and two tires have 50%. 68,000 GVWR. Iowa DOT inspection valid until October 2025. $26,997 NOW $22,997 FOB IA Wood Tech Systems 765-751-9990 www.woodtechsystems.com
PHONE: 800-289-5627
All of our Trailers come with a 2 Year Warranty and are custom built. We use blast prep for our powder coat prime and paint system, air-ride suspension and we now offer Galvanized Rollers as an option. We build 38’-53’, 42’-60’, 50’-70’ and 53’-80’ Extendable Truss Trailers, 26’, 32’ and 36’ Gooseneck Truss Trailers (Split Truss Available as well on Goosenecks) and 40’, 48’, and 53’ Standard Truss Trailers.
2021 Big John Extendable Truss Pole Trailer 2021 Big John peak down extendable pole trailer. Transports up to 60′ peak down trusses with a retracted length of 35 ft. O.A., and an extended length of 45 ft. O.A. Adjustable in up to 2 ft. increments. Outer tube frame is 8″ sq. tub and inner frame is 6″ sq. tub. Features 2 axles with anti-lock brake system and parking brakes on both axles. Trailer features air ride suspension with dump valve and 2 speed landing gear. $23,890 FOB NC Wood Tech Systems 765-751-9990 www.woodtechsystems.com
You Can Truss our Truss Trailers!
Quality American Made Truss Trailers
Call Bryan Shinn today to purchase one of the trailers listed above or to get a Quote and have us build a NEW Truss Trailer for you call or email -
Bryan Shinn - Sales Manager 701-941-2017 or 1-800-237-5161 bryan.shinn@precisionequipmfg.com
sales@precisionequipmfg.com
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #136
$235,000 FOB WA
2019 Peterbilt with Manitex Crane • 2019 Peterbilt (40,000 Miles) • Cummins X15 500 HP Diesel Engine • Eaton 10 Speed Autoshift • Power Windows, Locks & Mirrors
• Cruise Control • Jake Brakes • Manitex Model TM200 20 Ton Crane • 84' Six Section Boom
Buy Factory Direct From Wasserman & Associates at the same price as the Manufacturer, and get the added support and care you need to be up and running FAST! WE’LL EVEN HELP SELL YOUR USED EQUIPMENT TOO!
800-382-0329 | www.wasserman-associates.com PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #137
TRUCKS & TRAILERS
Pricteion! c e R du
Used - 2014, R157 48” Roll -Off Precision Trailer Tandem Axles | Air Ride Suspension : Air Operated Load Control, Air Operated Pin Locks | Mesh Between Rollers | Beaver Tail | Strap Locks and Winches | LED Lighting | 11.4 Ton Self Contained Power | (1) Heachache Rack $17,500 NOW $10,500 Eide Machinery Sales, Inc. 612-521-9193 www.eidemachinery.com/equipment/ trailers
Used - 2014, R156 48” Roll -Off Precision Trailer Tandem Axles | Air Ride Suspension : Air Operated Load Control, Air Operated Pin Locks | Mesh Between Rollers | Beaver Tail | Strap Locks and Winches | LED Lighting | 11.4 Ton Self Contained Power | (1) Heachache Rack $17,500 NOW $10,500 Eide Machinery Sales, Inc. 612-521-9193 www.eidemachinery.com/equipment/ trailers
2015 JLG G10-55A Telehandler Lift • 10,000 LB Capacity • 55' Lift Height • 4 Wheel Drive • 3 Way Steer • 72" Fork Carriage • 60" Pallet Forks • Foam Filled Tires • Cummins QSB 4.5 Turbo Diesel • 4,350 Hours $59,900 FOB CA Wasserman & Associates 800-382-0329 www.wasserman-associates.com PHONE: 800-289-5627
2004 and 2005 Pratt 53' Roll-Off Trailers Hydraulic Front End Sliding Tandems Roller Locks Winches and Straps Headache Rack Tool Box Several cross member have rust holes and need to be replaced $12,500 Each or $24,000 for Both Trailers Wasserman & Associates 800-382-0329 www.wasserman-associates.com
2015 Precision 50-70′ Stretch Roll Off Trailer (R158) 2015 Precision 50-70′ stretch roll off trailer features sliding tandem axle, fifth wheel connection, locking rollers, ABS brakes, and hydraulic lift neck. This trailer does have a current DOT inspection. Estimated 50% tire tread remaining. $27,990 FOB WI Wood Tech Systems 765-751-9990 www.woodtechsystems.com
A
The
Component Manufacturing dverti$er
Serving the Structural Building Components Industry
1993 JDH Trussmaster 48'-70' Stretch Roll-Off Trailer Fixed Tandem • • Spring Suspension • Roller Locks • Winches & Straps Headache Rack • • Tires are Good (less than 5,000 miles on tires) • DOT is Current • Video available upon request $19,900 NOW $13,900 FOB IN Wasserman & Associates 800-382-0329 www.wasserman-associates.com
Pricteion! c Redu
2000 Haulin 36' Truss/Panel Roll-Off Trailer • Bed Length: 36' • GVWR: 26,000 Lbs • Battery Operated Hydraulic Tilt • Electric Brakes • Locking Rollers • Trailer Inspection is current • One location needs steel plate/weld repair (reference photo) $19,900 NOW $10,900 FOB PA Wasserman & Associates 800-382-0329 www.wasserman-associates.com
Pricteion! c Redu
1995 ASI 48'-70' Stretch Roll-Off Trailer • Slanted Profile • No Hydraulic Lift (has been removed) • Fixed Tandems • Spring Suspension • New Landing Gear and New Springs/ Shackles on the rear axles within the last year • Tires are Good (4 new tires in Summer of 2024) • Roller Locks • Headache Rack DOT is current (February 2025) $12,800 NOW $9,980 FOB WI Wasserman & Associates 800-382-0329 www.wasserman-associates.com
2014 Precision 48′ Roll Off Trailer (R156) 2014 Precision 48′ roll off trailer features tandem axle, fifth wheel connection, locking rollers, ABS brakes, and hydraulic lift neck. Estimated 50% tire tread remaining. $17,990 FOB WI Wood Tech Systems 765-751-9990 www.woodtechsystems.com
JobLine.com, inc.
The
800-289-JOBS
Time To Hire? We’re here when you need help! visit: www.thejobline.com email: twm@thejobline.com
STRICTLY CONFIDENTIAL!
Read/Subscribe online at www.componentadvertiser.com
Used Precision 50’-70’ Stretch Trailer Tandem Axles | Air Ride Suspension, Air Operated Load Control, Air Operated Pin Locks | Mesh Between Rollers | Beaver Tail | Strap Locks and Winches | LED Lighting | 11.4 Ton Self Contained Power Unit | (1) Heachache Rack $27,500 NOW $25,500 Eide Machinery Sales, Inc. 612-521-9193 www.eidemachinery.com/equipment/ trailers FAX: 800-524-4982
Subcomponent Assembler Guards Not Shown
Two 2x6 ells SIMULTANEOUSLY See it in action on
Triad's proprietary (Patent Pending) Ai means: • Your operator doesn't waste time telling the machine what kind of subcomponent is being built, • OR what size dimensional lumber is being used, • OR what nailpattern to switch to OR tool gun(s) to use. • You can switch from building one type of subcomponent to another instantly! • Just-in-time subcomponents are now a reality - OR batch build subcomponents -- your choice!
►
VouTube
[!l
Triad's unique outfeed conveyor: • Can send finished subcomponents in any one of three directions: Left, Right, or Down the line. • Now you can sort & feed: To your component table, framing table, AND material handling carts, if desired!
•w' Triad Machines
Put our 65+ years of experience to work for you! 800-568-7423 ext. 133 www.TriadMachines.com
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #139
MISC.
New Handle Bar Router • Metabo HPT M12XE Variable Speed Router • Steel Handle Bar Frame with Makita Switches • 3 1/4 HP / 120 Volt / 1 Phase / 15 Amp • Includes 2 Router Bits $3,000 FOB NE. Wasserman & Associates 800-382-0329 www.wasserman-associates.com
Pricteion! c Redu
Champion Valve Plus Compressor Champion Valve Plus – Reciprocating twostage compressor, model 7.5–V80E, with Eaton controls, 7.5 HP motor, 80 gal vertical tank, rated for 22 cfm @ 175 PSI. 208/230/ 460 volt, 3 phase electrical required. $2,495 FOB AZ Wood Tech Systems 765-751-9990 www.woodtechsystems.com
2019 Kundel 35' x 100' 1 Ton Crane System • 200' Travel Length (can be split into two 100' systems) • 2 Each - 35' Span Gantry Bridges with 1 Ton Harrington Electric Hoists • 20' Height • Internal Electric Bus Bar (eliminates festoon system)
$45,000 NOW $26,900 FOB AZ
800-382-0329 | www.wasserman-associates.com 2023 Atlas Copco Compressor in Container Housing 2023 Atlas Copco type G7FF rotary screw compressor with internal dryer and external tank. Compressor capacity is 145 PSI, has a 10 HP motor, external air tank includes bleed valve and manual output valve. System comes contained in a custom shipping container with locking entry door, thermostat controlled electric fans, throughwall induction vent grills, interior lighting, electrical panel and utilities for a second compressor. Container size is 8′ width x 10′-6″ long x 8′-8″ height. Hours as of 19 September ’24 were 986. 480 volt, 3 phase / 120VAC electrical required. $34,490 FOB AZ Wood Tech Systems 765-751-9990 www.woodtechsystems.com
Pricteion! c Redu
2023 Triad Flow Through Component Nailer • Assembles Trimmers, Partition Leads, Corners, Headers, Ells, Jack Studs • Length Capacity: 10'-2" • Clamp Opening: 3" x 3" to 12" x 12" • Vertical & Horizontal Clamping Pressure: 300 Lbs at 100 PSI • Foot Pedal Control • On/Off Switches for Each Nail Gun • Pop-Up Stop • Nail Trays • 10' Infeed & 10' Outfeed Roller Conveyor with Stands • Excludes Nail Guns $19,900 FOB ON Wasserman & Associates 800-382-0329 www.wasserman-associates.com
A
The Triad 20' Power Chain Conveyor • Foot Pedal Control • 2 Pairs available at $7,500 NOW $6,500 Each Wasserman & Associates 800-382-0329 www.wasserman-associates.com PHONE: 800-289-5627
Component Manufacturing dverti$er
Serving the Structural Building Components Industry
NEW!
New Sub-Component Nailer • • • • • • • •
Assembles Trimmers, Jacks, L’s, Channels & Headers 2x4 and 2x6 Capacity Remote Fire & 3-Way Clamping Staggered or Straight Line Nail Pattern Squaring Stop Foot Pedal Control Reserve Air Tank 5’ Infeed & Outfeed Roller Conveyor
$29,800 FOB NE 800-382-0329 | www.wasserman-associates.com Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget!
August 2025 #17313 Page #140
Adverti$$er
You Saw it in the
MISC.
• • • •
Electrical Supply: Motor: Highly Accurate: Stop Rail: Stops: Stop Blocks: Internal Components: Dimensions:
110 VAC 1/4 HP, 110 VAC, Linear Actuator +/- .010 Inches 2 x 4 x 1/4 Aluminum Extrusion Jig Bored Steel Machine Billet Aluminum Hardened, Ground and Polished Steel and Billet Aluminum Length: 5 feet (60”) to 60 feet (720”) Height: 12 inches Depth: 12 inches
If you are looking for the fastest, mist consistent way to measure and cut your product, then the Hain Measuring System (MEA) is your answer. The MEA changes from one length t any length instantly, up to 60’, without changing the operator’s position on the line. It is also highly accurate (+- .010) and quickly moves from one length to the next in seconds. The MEA is designed for quick and easy setup and is simple to use. Even a first time user will be productive with little or no training required. It can adapt to any saw and can be mounted to any surface so that you can integrate the MEA with your existing setup. The MEA is versatile allowing “left” or “right” handed operation and measurement in “feet and inches” or “inches” depending on your preference. The MEA is also available in a “Skid Mounted” version.
theHAINCOMPANY 6125 Enterprise Drive, Unit 92 | Diamond Springs, CA 95619 530.295.8068 | sales@thehaincompany.com PHONE: 800-289-5627
Alpine Lumber Carousel 7 Bunk Capacity (up to 12' Lumber) Pushbutton Control Station 10 HP / 3 Phase Motor In working condition when removed in August 2023 $11,900 FOB Manitoba Wasserman & Associates 800-382-0329 www.wasserman-associates.com
New Monet Power Deck Infeed Decks Heavy-duty, 5-chain feed system to bring material to the infeed of the component saw. 16′ wide x 20′ long x 36″ high. Transfers 6′ to 20′ lumber lengths. Option for 6-arm Power Deck available at an additional cost. Features auto-feed advance, foot pedal override forward and reverse, variable speed control, double bearing construction, softstart and soft-stop and e-stop cable. Base price shown. 480 volt, 3 phase, 15 Amp electrical required. (Prices start at $31,000.) Wood Tech Systems 765-751-9990 www.woodtechsystems.com
JobLine.com, inc.
The
800-289-JOBS
SL-Laser Model ProDirector 7 Projection System Improved model ProDirector 7, green-color laser projection system from SL-Laser. Projects roof truss, floor truss and wall panel design images accurately onto building surface for faster setup and fabrication times. New employees are productive more quickly, with less training required. Each laser head provides 21′ projection length (at 15-foot ceiling heights). New model PD7 projector heads are smaller in size than previous models, have diodes that are easier than ever to swap out and maintain, and project an even clearer line onto the building surface. System includes projector heads, cables, mounting hardware for attachment to customer’s structure, factory installation, training, and options for computer controls. Works with each connector plate manufacturer’s design software. Modular nature of the laser heads allows for easy future expansion of system length. 120 volt, 1 phase. FOB NC Wood Tech Systems 765-751-9990 www.woodtechsystems.com
6 Chain Live Deck 6 Chain Live Deck 20’ Long x 17’ Wide Foot Pedal Control 240 Volt / 3 Phase $9,900 FOB ND Wasserman & Associates 800-382-0329 www.wasserman-associates.com
Time To Hire? We’re here when you need help! visit: www.thejobline.com email: twm@thejobline.com
STRICTLY CONFIDENTIAL!
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
August 2025 #17313 Page #141
Adverti$$er
Equipment Wanted! Saws
Trucks & Trailers
• Automated Component & Linear Saws (2010 & Newer) • Monet DeSauw or TimberMill Manual Component Saws • Floor Web Saws • Spida (Apollo) Saws with Truss Automation • Bunk Cutters
Modular Equipment
Truss Equipment
• Roller Gantry & Hydraulic Press Systems • Finish Rollers • Truss Stackers • Floor Truss Machines • Lumber Splicers • Jack Tables • C-Clamp Presses
• Stretch Roll-Off Trailers • Gooseneck Roll-Off Trailers • Pacific Automation or MiTek Mobile Home Press
Contact Wasserman & Associates for a Fair Market Value Assessment of your Used Equipment Operational, Needs Work, and Parts Only equipment will be considered!
800-382-0329 | www.wasserman-associates.com
The
JobLine.com
$50,000 FOB QC New ASI Ink Jet Plate Marker • Automated Wall Panel Parts Cutting & Marking as directed by Wall Panel Design Software Output • 20' Roller Conveyor with Servo Motor Controlled Length Stop/Plate Pusher • 10' Infeed Roller Conveyor • 24" Lenovo Touch Screen Computer (Windows 11 Pro OS) • ASI Basic L Plate Cutting/Marking Operating Software • 4 Head Ink Jet Plate Marker (marks 2 plates on edge)
800-382-0329 | www.wasserman-associates.com MISC.
Pricteion! c Redu
Truss Design Manager(s) MiTek software J15370
Lead truss design teams in Central Florida. In-office role using MiTek software. Full-time with strong benefits, relocation assistance, and leadership opportunity. Two locations, two positions. One is in a trendy location, the other is in a great place for avid outdoor enthusiasts. I have worked with this client for years and they are expanding! In addition to another truss plant, they are adding a wall panel plant. We have additional job opportunities for Remote Truss and Wall Panel Designers. Please contact me for additional information.
• 110 Volt / 1 Phase • Includes Onsite Installation & Training • Excludes Saw & Dust Collector • Approximately $50,000 USD with DeWalt Sliding Miter Saw including Freight, Customs Brokerage Fees & Installation • Other Saw Options Include: Existing Saws, ASI Radial Arm Saw, Lauderdale Hamilton Up Cut Saw & Vista Angle Boss Saws • Video available upon request
FC Curtis CA Series Compresso FC Curtis model E-15 two-stage, piston drive, air compressor with dryer and 80 Gal. horizontal storage tank, 175 PSI, and 5 HP drive motor. Sold for $4,200 new. 480 volt, 3 phase electrical required. $2,495 FOB AZ Wood Tech Systems 765-751-9990 www.woodtechsystems.com
Hain 210" Powered Measuring System • Powered (1 Phase) Measuring System • Inches System (21 Stops at 10" Centers) • 15' Roller Conveyor with Stands $6,225 NOW $5,250 FOB CA Wasserman & Associates 800-382-0329 www.wasserman-associates.com
A
The
Component Manufacturing dverti$er
Serving the Structural Building Components Industry
For Additional Information email: twm@thejobline.com PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #142
MISC.
EMSI Teeter Cart Width – 46” / Length – 73” / Load Capacity – 2850 pounds / Pneumatic tires – 14.5 inch / Maximum utility in truss plants, panel plants, and lumber yards / Quick Assembly by bolting parts together / All hardware is supplied / Upright 2 x 4’s not supplied / Medium duty tires rated at 1500 lbs each are included. Call for Price Eide Machinery Sales, Inc. 612-521-9193 www.eidemachinery.com
Used - Quincy 25 Horsepower Screw Compressors (2x) Taken from service | Optional: Refrigerated Air Dryer - $500 $3500 each Eide Machinery Sales, Inc. 612-521-9193 www.eidemachinery.com
NEW GALVANIZED STEEL STRAPPING 1 1/4" wide x .035 thick. $95 per coil. $1,900 per skid (21 coils). FOB PA. Wasserman & Associates 800-382-0329 www.wasserman-associates.com
2022 Sullair Rotary Screw Air Compressor • Model 1112E • 43.7 CFM at 175 PSI • 460 Volt / 3 Phase $4,900 FOB WA Wasserman & Associates 800-382-0329 www.wasserman-associates.com
2010 UsiFab Splicer 2010 UsiFab Splicer, model RL, splices 2×4 to 2×8 in vertical orientation, forces lumber together prior to plate pressing, maximum plate size is 7×17″, tubular construction, adjustable pressing rollers, upper hold down and plate clamping guides, single operator station with push-button controls. 4.5 HP motor. 600 volt, 3 phase electrical required. 100 PSI air required. $17,997 FOB QC Wood Tech Systems 765-751-9990 www.woodtechsystems.com
AMI Industrial Floor Carts AMI's industrial floor trucks (material carts) are designed of hardwood construction, fitted with space-age phenolic, roller-bearing wheels, and ball bearing swivel casters for strength and durability. AMI's phenolic wheels resist shock without chipping. They are non-sparking, non-marking, and can be operated continuously between -50℉ and 260℉. They are unaffected by grease, oil or debris on your shop floor. Series "B" AMI Industrial Floor Truck
2018 Wasserman Sub-Component Nailer • Assembles Trimmers, Jacks, Corners, Ells, Partition Leads, Channels & Headers • 2x4 and 2x6 Capacity (double pass on headers to 2x10) • Remote Fire & 3-Way Clamping • Staggered or Straight Line Nail Pattern • Squaring Stop • Foot Pedal Control • Reserve Air Tank • 5' Infeed & Outfeed Roller Conveyor • (2) Duo-Fast DF350S Strip Nailers $19,900 FOB ND Wasserman & Associates 800-382-0329 www.wasserman-associates.com
PHONE: 800-289-5627
Our swivel casters are precision built with perfectly aligned raceways. All cold-form parts are made to exacting tolerances from heavy-gauge steel, and are hardened for severe service and long wear. Series B-4 carts include four casters, one at each corner, to prevent "tri-cycling" of long lumber loads. S t a n d a r d M o d e l s Av a i l a b l e Max Load Weight (lbs.) 2748 27" x 48" Series "B" & "C" 2500 3248 32" x 48" Series "B" & "C" 2500 3260 32" x 60" Series "B" & "C" 2800 3660 36" x 60" Series "B" & "C" 2800 3672 36" x 72" Series "B" 4000 4072 40" x 72" Series "B" 4000 3696 36" x 96" Series "B" 4000 4896 48" x 96" Series "B" 4000 *Other models and sizes are available on request. FOB NC. Wood Tech Systems 765-751-9990 www.woodtechsystems.com
$94,900 NOW $79,900 FOB NE 2020 Ranger RS Lumber Retrieval System
• Fully Automatic Laser Guided Lumber Retrieval System • 5 Lumber Carts (6' to 20' Lumber) • Vertical Dividers for Magazine Carts • Vacuum Pick Head System • Perimeter Safety System (Light Curtains, Fencing & Gate) • 50' x 28' Footprint • 5 Extra Custom Built Lumber Carts • Designed to fit Monet Deasuw DeRobo Saw • Available July 2024 • Video available upon request
800-382-0329 | www.wasserman-associates.com
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #143
NEW!
NEW!
BAM Stair Wedge Saw Builders Automation Machinery (BAM) model 2220, stair wedge saw station automatically produces wood wedges used to lock stair treads and risers into slots cut into the stair stringers…
Price based on configuration FOB FL
765-751-9990
www.woodtechsystems.com
BAM Pre-Hung Door Machine Titan Series Builders Automation Machinery (BAM) Titan series pre-hung door machine. Designed to produce between 150 and 250 doors per day. Multi-function door machine capable of doors 1'-6″ to 4′-0″ in width, and both 6′-8″ or 8′-0″ door heights. Processes both 1 3/8″ and 1 3/4″ thick door slabs. Machines the door, hinge jamb and strike jamb all at the same time. Capable hinge sizes include 3 1/2″ x 3 1/2″, 4″ x 4″, 4 1/2″ x 4 1/2″ with 5/8″ radius. Cycle time with flush hinge routing is 45 seconds. 10′ long x 7′-6″ wide footprint. Shipping weight 4,000 lbs. More information Click Here Price based on configuration
NEW!
765-751-9990 PHONE: 800-289-5627
www.woodtechsystems.com
Builders Automation Stair Stringer Router More information here: http://goo.gl/mSsxyY 800-382-0329 | www.wasserman-associates.com
NEW! BAM Staircase Assembly Clamp Builders Automation Machinery (BAM) staircase assembly clamp, model 2210, accommodates up to 20 foot long stringers with a maximum width of 54″…
Price based on configuration FOB FL 765-751-9990
Read/Subscribe online at www.componentadvertiser.com
www.woodtechsystems.com FAX: 800-524-4982
Now EVEN BETTER with: • Automatic Homing (time-saver)! • Larger capacity (up to 16" wide stringers)
Triad's very successful Open Stringer Saw (OSS) was designed to increase productivity and cut perfect stringers -- every time! After 20 years, the newly-redesigned OSS takes the experience of our industry-leading engineering to create an even higher-capacity AND higherproduction version of the OSS.
W Open Stringer Saw
It now also features automatic homing!
Check out our full line of Machines for the Pro Stair Builder
NEW! 60" Max Width Tilting Staircase Assembly Clamp
Triad Wedge Cutter
The OSS is powered by two 10 HP soft-start motors & uses two 30x80" carbide blades.
Triad Stair Boss PRO
Triad Template Stair Router
Triad Handrail Machine
Triad Staircase Assembly Clamp
Triad XSL Stair Lift
Heavy Duty Stringer Cart
� Experience you can trust. �
The NEW OSS is touchscreencontrolled and has automatic indexing and cutting. A built-in infeed & outfeed roller conveyor come as standard equipment.
www.TriadMachines.com I P.O. Box 130 Alda, NE 68810 I 800-568-7423 Ext. 133
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
August 2025 #17313 Page #145
Adverti$$er
Door } Stair } Window Machines
BAM “Ovation” Door Machining Center (DMC) New Builders Automation Machinery “Ovation” series, door machining center (DMC). Fully programmable, two-stage door machine featuring (27) axes of operation. Can be specified with either two or four front machining heads. Machine is side-eject, direct-drive with helical gear racks and gear protection from dust. The door loader is driven by an absolute encoder; no stepping motors, belts or exposed ball screws are used. More information Click Here Price based on configuration Wood Tech Systems 765-751-9990 www.woodtechsystems.com
RUVO MODEL 1300 DOUBLE END DOOR TRIM SAW $4,250 FOB PA Wasserman & Associates 800-382-0329 www.wasserman-associates.com
Used - Auto Omni Control Panel Set Control Panel Set for 5 Head Auto Omni Component Saw | Complete with Control Cards | Parts Machine $500 – Make Offer Eide Machinery Sales, Inc. 612-521-9193 www.eidemachinery.com
We create transformative website and app experiences Since 2006, we've been helping businesses of all kinds build their online presence. We make websites and software for the construction industry to empower companies to reach a wider customer base and engage their audiences. Companies all around the world work with us to make websites and apps that people actually want to use. Reach out to Wolf X Machina if you're a business and you want a website that actually drives results.
WOLF X MACHINA www.wolfxmachina.com info@wolfxmachina.com
New Rack Cart • 44" x 77" Base • 10" Casters • 4 Vertical Uprights with 32 Adjustable Arms • 3,000 Lb Capacity • White Powder Coat Finish (Optional Custom Colors) • Made in the USA with USA Steel $2,210 FOB SD Wasserman & Associates 800-382-0329 www.wasserman-associates.com
Pricteion! c e R du
Building Component Manufacturing Industry
Job Board Employer to Candidate
Direct Hiring!
No Recruiting Fees! Post Your Opportunity Candidates Respond
Directly to You! Sweed Scrap (Band) Chopper with Stand 1/2 HP Motor (115/208-230 Volt) $1,900 NOW $1,750 FOB NE. Wasserman & Associates 800-382-0329 www.wasserman-associates.com PHONE: 800-289-5627
For Additional Information twm@Hiring-Zone.com or Call: 800-289-5627 x1 Visit our website: www.Hiring-Zone.com
NEW!
BAM Door Loader, Model 2001
Builders Automation Machinery (BAM) door loader, model 2001. Allows you to stack door slabs horizontally and feeds them into a horizontal door machine like the BAM model 996E-TS. Mechanically adjusts door stack height vertically as slabs are fed into machine. Clamp automatically adjusts to type and size of door slab: steel, solid-core or hollowcore, from 6-ft to 8-ft heights. Electronic, programmed controller manages the loading process. Loader positions the door stacks adjacent to the door machine infeed to save effort of the operator. Pneumatic motor and heavy-duty drive train provide dependable continuous use. Cycle time approximately (30) seconds per loaded door slab. Footprint approx. 10′ x 10′ x 11′. Weight 2,000 lbs. 120 volt, 1 phase, 15 Amp electrical required. 120 PSI at 20 CFM (1/2″ ID line min.) air required.
Price Based on Configuration
765-751-9990
Read/Subscribe online at www.componentadvertiser.com
www.woodtechsystems.com FAX: 800-524-4982
EVEN WITH ALL ITS ADVANCES, THE SAME OLD ADAGE RINGS TRUE. NOTHING DRIVES QUITE LIKE A V.8. Inspired by ten years of intensive field experience and the ample and detailed feedback of numerous customers, we’re pleased to introduce the most advanced, most enhanced and high-performance Terminailer yet - Terminailer V.8. Drawing on invaluable time in the trenches closely evaluating Terminailer’s performance under varying conditions, our engineers have incorporated critical learning and insight to enhance simplicity, performance and operator control. Just part of what V.8 offers includes: •
Vastly enhanced operator control for even greater productivity
•
A redesigned nail-feed supplying EverWin PN90-PAL industrial nail guns
•
Simplified pneumatics featuring direct air-supply to all six nail guns
•
Even more sub-component profiles for wall design flexibility
•
Rugged durability with pharmaceutical grade assembly
Developed by people who know well the mechanics, safety considerations and business aspects of wall panel production, Terminailer V.8 combines more enhancements & operator-friendly features than ever to take your productivity to the next level and beyond. Contact us to learn even more and to put the V.8 performance in motion at your facility.
765-751-9990 www.woodtechsystems.com
Wood Tech Systems is a registered tradename of Wood Truss Systems, Inc.
A
Th e
CComponent Manufacturing OMPONENT MANUFACTURING dverti$ dverti $ er dverti$er
Don’t Don’t Forget! Forget! You Saw it in the Adverti$ $er YOU SAW IT IN THE
Safety First! Safety Meeting Topics From State Fund CA.
Sharp and Cutting Tool Safety Hand-held sharp and cutting tools are frequently used in the workplace. The tools range from scissors, razors, saws, and knives to pruners, chisels, and snips. While these tools are very different and can be used for a wide variety of jobs, they have some common hazards and safety precautions. Horseplay should be forbidden around sharp and cutting tools. Sharp and cutting tools can cause cuts and puncture wounds, if they’re not handled properly. Workers should be trained in the tool manufacturer’s directions for proper use, including how to inspect, maintain, and sharpen the tool. For some tools, workers must wear personal protective equipment such as safety glasses and well-fitting gloves.
August 2025 April 20th, 2012 #17313 #05139 Page #147 PAGE #34
Adverti$er La Seguridad con Herramientas de Corte y Filosas
Frecuentemente en el sitio de trabajo se usan herramientas de mano de corte y filosas. Estas herramienta abarcan desde tijeras, navajas, sierras y cuchillas hasta podadoras, cinceles y cortadoras. Aunque estas herramientas son muy diferentes y pueden usarse para una amplia variedad de tareas, tienen en común ciertos peligros y precauciones de seguridad. Se deben prohibir los jugueteos cerca de herramientas de corte y filosas. Las herramientas de corte y filosas pueden ocasionar cortadas y lesiones por perforación si no se manejan debidamente. Los trabajadores deberán estar capacitados sobre las instrucciones del fabricante en el uso correcto de la herramienta, incluyendo cómo inspeccionarlas, mantenerlas y afilarlas. Con algunas herramientas los trabajadores deberán usar equipos de protección personal, tales como gafas de seguridad y guantes que le queden bien.
Con el objeto de seleccionar la herramienta correcta para cada tarea, el trabajador debe considerar no sólo la tarea a ejecutar sino también el tipo, In order to choose the right tool for the job, workers should consider not la dureza y las dimensiones del material con el que trabajará. El uso de una only the job task but the type, hardness, and size of the material on which they’ll herramienta incorrecta para el trabajo puede resultar en un accidente o lesión. Los be working. Substituting the wrong tool for the job can lead to an accident or trabajadores deberán usar sólo herramientas de buena calidad que estén afiladas injury. Workers should use only quality tools that are sharp and in good condition. y en buenas condiciones de operación. Si una herramienta está rota, desafilada If a tool is broken, dull or damaged, it should be tagged as such and taken out o dañada, debe rotularse como tal y sacarse de servicio. of service. La regla más importante a recordar cuando se usan herramientas de corte The most important rule to remember y filosas es SIEMPRE hacer el corte en sentido opuesto about using sharp and cutting tools is to al cuerpo y la cara. Cuando se corta con una sola mano, ALWAYS cut away from the body and el trabajador debe saber dónde tiene la otra mano. Si se face. When cutting with one hand, workers cae una herramienta afilada, los trabajadores deberán estar should know where their other hand is. If entrenados para no tratar de atraparla, sino dejar que se a sharp tool is dropped, workers should be caiga, asegurándose de tener las piernas y los pies fuera taught not to try to catch it but allow it to de su trayecto. fall, making sure that their legs and feet are La manera segura de trabajar con herramientas de out of the way. corte y filosas es concentrarse en la tarea que se está The safe way to work with a sharp haciendo, efectuando cortes rectos y uniformes sin sacudir, or cutting tool is to concentrate on the levantar o girar la herramienta. Martillar o aplicar presión task at hand, making straight, even cuts excesiva sobre herramientas de corte y filosas puede hacer without rocking, prying or twisting the que se resbalen. Tenga en cuenta que algunos materiales o tool. Hammering or applying excessive condiciones del tiempo también pueden volver resbalosas force or pressure to sharp and cutting tools a las herramientas. can cause them to slip. Keep in mind, that Los trabajadores necesitan tener cuidado al some materials or outdoor conditions can transportar y almacenar las herramientas filosas. Los also make tools slippery. trabajadores deben recibir instrucciones de nunca llevar Workers need to be careful when transporting and storing sharp tools. una herramienta filosa en el bolsillo, que deben usar funda, cinturón o delantal Workers should be instructed not to carry a sharp tool in their pocket; to use a y que cuando hay una pausa en el trabajo se debe sostener la herramienta a sheath, belt or apron; and when there is a pause in work, to hold the tool at their un lado del cuerpo, pero a una distancia segura. Cuando se camina con una sides but a safe distance from their body. When walking with a sharp tool, the tool herramienta filosa, ésta deberá llevarse con la cuchilla hacia abajo y alejada del should be carried with the blade down and away from the body. When climbing cuerpo. Cuando se sube con una herramienta filosa, se debe usar un cinturón with a sharp tool, tool belts or buckets with hand lines should be used so workers para herramientas o cubetas con cuerdas para subirlas a mano, de manera que el can have both hands to grip the ladder. When passing a sharp or cutting tool to trabajador tenga las dos manos libres para sujetar la escalera. Cuando se traspasa another worker, tools should be passed with the hand first and the blade down; una herramienta filosa a otro trabajador, ésta debe darse con el asa primero y con they should never be tossed from one worker to another. la cuchilla hacia abajo; nunca se debe tirar de un trabajador a otro. When not in use, sharp or cutting tools should be stored in a sturdy tool Cuando no estén en uso, las herramientas de corte y filosas deben guardarse box or on a tool rack with the sharp edges suitably covered. Otherwise, they en una caja de herramientas resistente o en un bastidor para guardar herramientas, should be placed near the back of work benches to keep handles or blades from con sus cuchillas debidamente cubiertas. De lo contrario, se deben colocar cerca extending over the edge. de la parte trasera de bancos de trabajo para evitar que las asas o las cuchillas sobresalgan más allá del borde del banco.
The above evaluations and/or recommendations are for general guidance only and should not be relied upon for legal compliance purposes. They are based solely on the information provided to us and relate only to those conditions specifically discussed. We do not make any warranty, expressed or implied, that your workplace is safe or healthful or that it complies with all laws, regulations or standards.
PHONE: PHONE:800-289-5627 800-289-5627
RRead/Subscribe EAD/SUBSCRIBE online ONLINE at AT www.componentadvertiser.com WWW.COMPONENTADVERTISER.COM
FAX: 800-524-4982 FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
August 2025 #17313 Page #148
Adverti$$er
Calendar of Events AUGUST 2025
August 6–8
So Forest Prod Assoc (SFPA) Forest Prod Machinery Equip EXPO
Nashville, TN
August 7
Midwest Bldg Suppliers Assoc. (MBSA) Sycamore Scramble Golf
Anderson, IN
August 7
Wisconsin Truss Mfrs Assoc (WTMA) Chapter Meeting
Online
August 12–14
Ace Hardware Fall Convention
Chicago, IL
August 14
Mountain States Lbr & Bldg Mat Dealers (MSLBMDA) Clay Shoot
Brighton, CO
August 19
Offsite Construction Summit
Atlanta, GA
August 19–21
Mid-States 2025 Fall Rendezvous
Phoenix, AZ
August 21
Minnesota SBCA Chapter Meeting and Twins Game
Minneapolis, MN
August 21–22
Florida Bldg Mat Assoc (FBMA) Building Products Expo
Lake Buena Vista, FL
August 28
Midwest Bldg Suppliers Assoc. (MBSA) White Pine Classic
Stanwood, MI
SEPTEMBER 2025 September 5–8
Do it Best Fall Market
Indianapolis, IN
September 10–12 Northeastern Lumber Mfrs Assoc (NEMLA) 92nd Annual Meeting
Stowe, VT
September 11
TBA
Truss Mfrs Assoc of Texas (TMAT) Heroes’ Tribute Golf
September 15–18 North Am Wholesale Lumber Assoc (NAWLA) Wood Basics
Corvallis, OR
September 16
Portland, OR
Forest Economic Advisors (FEA) Forest Products Forum
September 16–18 Southeastern Lumber Mfrs Assoc. (SLMA) 2025 D.C. Summit
Washington, D.C.
September 17–19 Lumbermens Assoc. of Texas (LAT) 138th Annual Convention & Expo
Austin, TX
September 18
Offsite Construction Summit
Denver, CO
September 22
Woodrise 2025
Vancouver, BC, Canada
September 23–25 Lumbermens Merchandising Corp. (LMC) Leadership Summit
Denver, CO
September 24
Portland, OR
Forest Economic Advisors (FEA) Forest Products Forum
September 24–26 Construction Suppliers Assoc (CSA) Conference & Tradeshow
Miramar Beach, FL
Sept 29–Oct 1
Builder Connections
Arlington, TX
Sept 29–Oct 3
Bldg Component Mfrs Conference & Framers Summit (BCMC | FS)
Omaha, NE
OCTOBER 2025 October 1
BLD Connection 2025 Sunflower Shootout Golf Outing
Manhattan, KS
October 2
North Am Wholesale Lumber Assoc (NAWLA) Regional Meeting
Omaha, NE
October 4
BLD Connection 2025 Wine & Whiskey Outing
Des Moines, IA
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
August 2025 #17313 Page #149
Adverti$$er
Calendar of Events
October 8–10
ProDealer Industry Summit 2025
Louisville, KY
October 13–14
Timber Construct 2025 Conference & Exhibition
Melbourne, VIC, Australia
October 15–16
Midwest Bldg Suppliers Assoc (MBSA) Connect
Michigan City, IN
October 15–17
Construction Specifications Institute (CSI) Conference
Cleveland, OH
October 15–17
LBM Strategies 2025 Conference
Nashville, TN
October 20–22
LBM Advantage Fall Planning Conference
Indianapolis, IN
October 21–23
METALCON
Las Vegas, NV
October 27–29
Future Place
Irving, TX
October 28–30
West Coast LBMA Annual Convention
San Diego, CA
NOVEMBER 2025 November 3–5
Lumbermens Merchandising Corp. (LMC) Expo
Philadelphia, PA
November 5–7
North Am Wholesale Lumber Assoc (NAWLA) Traders Market
Kansas City, MO
Don’t see your event? Increase attendance and participation by listing your industry focused events here! E-mail details and event web-link to Anna@componentadvertiser.org. We can’t guarantee space for all events, but all industry related events will be added on a space available and interest to our reader priority.
Elevate Your Wall Panel, Floor Truss or Roof Truss Manufacturing with 4Ward Design Solutions’ Precision Component Design Services!
Contact
Us PHONE: 800-289-5627
Design@4WardConsult.com
4Wardsolutionsgroup.com
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
The truss industry relies on 3rd party quality assurance services to provide random visits to review the plants Quality Assurance program along with their operations. If your plant needs to comply with the IRC, IBC and to those who depend on solid, experienced QA expertise, we ask you to consider selecting Timber Products Inspection, Inc. (TP) as your choice for 3rd party inspections. Proudly serving the forest products industry for over 50 years, TP brings the expertise you need to ensure your business is successful. As a responsible partner, TP delivers to clients, employees, and the industries we serve the confidence to drive value through the effective use of our diverse professional team. TP would like to welcome the following authorized agents to our inspection team, each of whom have many years of experience in the truss industry! •
Al Coffman
•
Jean Hart
•
Curt Holler
•
Chuck Ray
•
Glenn Traylor
•
Elliot Wilson
If you have questions about how you can make this selection, please contact your authorized agent above or Glenn Traylor at 919-280-5905 or trusguy@gmail.com.
https://www.tpinspection.com/ https://www.tpinspection.com/auditing-services/truss
The
JobLine
.com
Since 1992
Careers in the Truss, Wall Panel
and Engineered Wood Components Industry
Job Opportunities Available Candidates Services & Products
800-289-5627 www.thejobline.com
JobLine.com, inc.
The
800-289-JOBS www.thejobline.com
job opportunities available Remote EWP Designer New England ID: J15380
WANTED $32-45hr. Plus Bonus Plus Benefits D.O.E
S R E N G I S DE S S TRU Full Time rid
Hyb
ice -Off
In
te emo
R
Part Time
Let The JobLine Represent You! We Search our Large Network of Clients Throughout the US and Canada To Find Your Perfect Job
MiTek Multifamily Truss Designer Texas ID: J15378 Plant Manager - Wall Panels - J15375 Central Florida Truss & EWP Design Manager - J15376 Central Ontario Truss Design Manager - MiTek software J15370 Florida Remote Truss Designer J15313 New England Truss Designer J15339 New England Outside Sales - Truss/Panel J15371 Northeast Truss Design Manager - Apline J15366 Texas Light Gauge Steel Truss Designer - Alpine Remote, Hybrid, or South J15374
Strictly Confidential!
Remote Truss Designer - MiTek J15361 Mid Atlantic
See Our Job Postings at www.thejobline.com
Remote Mega-Multifamily Truss Designer J15368 Mid-Atlantic
The
JobLine.com
Truss Design Skills Evaluation Measures 9 areas of Skills and Experience Compairs Results to National Averages Identify Strengths and Areas For Improvement
Available On-Line
Sales Representative - J15355 Central Ontario Sales Manager - J15373 Southern Alberta In Office or Remote Truss Designer - MiTek Software J15369 Florida or remote in FL or GA Truss Designer - Multifamily/MiTek J15362 TN Truss Designer - Multifamily/MiTek J15363 TX Remote Truss Designer - Alpine Software J15350 Remote
$145 per Exam (Volume Discounts Available)
Truss Designer-J15365 Western Canada
Test your design team to have a better understanding of individual strengths and areas for improvement.
Remote Multifamily Truss Designer J15356 Texas
Use your team's results to measure potential new hires!
For Additional Information email: twm@thejobline.com PHONE: 800-289-5627
Truss Designer J15357 East Texas Implementation and Support Specialist J15306 100% Remote - Northeast Truss & Wall Panel Designer J15226 Northeast
Remote Truss Designer J15307 Full Time Remote Read/Subscribe online at www.componentadvertiser.com
August 2025 #17313 Page #152
Truss Production Manager-J15354 Greater Toronto Area Remote Truss Designer - Alpine J15246 Midwest Candidate preferred Senior Truss & Wall Panel Designer - MiTek J15352 Midwest CFS Truss Designer | Wall Panel Designer J5323 Midwest Outside Sales - Truss/Lumber J15345 Southeast Truss Designer - On-site - MiTek J15346 Florida Truss Designer J15348 South Senior Truss Designer - J15342 Mountains Project Coordinator J15272 TN Remote Truss Designer - MiTek J15228 Florida Truss Designer J14165 Carolinas Senior Truss Designer-J15300 Eastern Ontario Senior Truss & EWP Designer - J15320 AB, BC, ON EWP Designer - J15314 BC
WE WORK WITH OVER 100 LOCATIONS IN THE UNITED STATES AND CANADA SOME ARE HIRING NOW AND SOME ASK US TO CALL WHEN QUALIFIED CANDIDTES ARE AVAILABLE WE RESEARCH OPPORTUNITIES FOR YOU!
Strictly Confidential! See Our Current Job Opportunities
Here FAX: 800-524-4982
JobLine.com, inc.
The
ID: C18378 Remote Truss Designer Relocation: REMOTE, USA - Western Experienced Roof Truss Designer with a strong foundation in the building industry, seeking a role where my skills can contribute to company growth and long-term success. I thrive in fast-paced, high-pressure environments and excel at understanding customer needs, communicating clearly, and motivating teams through effective delegation. I recognize the importance of company-wide financial performance and strive to support overall success through efficient operations. My industry background is diverse, including truss design, hardware, lumber, equipment operation (small and heavy), construction, and home inspections. I began my career in the plant and advanced into design, gaining hands-on knowledge at every level. I designed trusses using EdgeCad and Computrus to generate customer estimates and batch cutting reports for sawyers and builders. I prepared engineering packages for submission to Building and Safety Departments and use EdgeTrack for scheduling, delivery coordination, and billing. I’m now transitioning to MiTek SAPPHIRE Structure for advanced design and project management and have completed many training programs for MiTek SAPPHIRE and am ready for the next challenge. ID: C18549 Remote Wall Panel Designer Relocation: USA - ALL States Wall panel designer with 10 years' experience including production builders, single family custom and small to MegaMultifamily projects. MiTek Sapphire software experience. ID: C18426 Remote Truss Designer Offshore Truss Designer with MiTek experience. The candidate is a civil engineer with 6 years' truss design experience for companies in Texas and Florida. Prior work for BFS and smaller manufacturers. Bilingual Spanish/English with a company set up to make paying easy. Scored 89 on our truss design skills evaluation, which is near the senior designer level. He is also SBCA I & II certified. He is willing to go to work immediately. Compensation: $65-75k as a subcontractor, no benefits or taxes. We haven't represented offshore candidates in the past but feel this candidate is worth a shot. Please contact Thom for additional details.
www.thejobline.com
Available Candidates ID: C10122 Designer/Design Manager - Truss Relocation: Iowa Senior Designer. - Advanced. Candidate has 24 years Truss Ddesigner experience and 5 years Truss Design Manager experience. Products include floor trusses, roof trusses, I-Joists, and hardware. Markets include single family, custom, high end, multi-family, light commercial, and agriculture. Primary duties include design, layout, optimization, cutting/production documents, and takeoff. Secondary duties include checking others work, repairs, customer service, inside sales, software maintenance, training, and filling in for the Design Manager as needed. Software experience includes MiTek and Keymark. Training received includes WTCA Level 2. Education: High School Graduate and Batchelors degree. Motivating factors: advancement, compensation, benefits, work location, job security, and relocation. ID: C18604 Truss Designer - Remote (MiTek) Relocation: Alberta I currently design & layout roof trusses, floor trusses, I-Joists and EWP from PDF plans and specifications for pricing. Also does engineering using MiTek, then uploads to Management or MBA in the past. Once sold, and field measurements are provided, I update the project and clean up the layouts, trusses and release them to the shop. I also answer questions from sales and the shop as needed as well as training newer designers. Most of my projects are single family, but I have also done several apartments, hotels, assisted living centers, and other commercial projects. I want to grow, learn, and become a better designer to be a valued team member. ID: C10968 Senior Wood Truss Designer - Part Time Relocation: Florida, Alabama, Georgia, REMOTE Candidate desires to use his career long industry experience to be the best Part Time Remote Designer you have. Prior truss plant owner for 10 years, strong production and operations management background, and JobLine Senior Designer rating in truss design using MiTek software. Also has FASTBeam experience. Products: floor & roof trusses. Markets: Single family custom, multi family, tract and light commercial. Was successful in creating strong teams in production, design and customer service, but the local economy and overwhelming competition was more than he could overcome from a small plant perspective. Degree: BSEE Compensation: Based on employee or 1099 status. Thom's Notes: I have worked with this
PHONE: 800-289-5627
August 2025 #17313 Page #153
800-289-JOBS
JobLine.com, inc.
The
candidate as an employer for years. Very detail oriented. Fair, honest, and customer service oriented. Very design/liability conscious. Scored 98
800-289-JOBS
ID: C10853 Remote Design Manager | Remote Offshore Design Project Manager Relocation: Texas, Georgia, USA - South Top level Engineering/Design Management candidate, 14+- years experience Truss, 4+- Panel experience. Has experience building and integrating offshore design resources with internal design departments and training design managers to better utilize offshore capabilities. Large volume manufacturer experience. MiTek Sapphire design/layout proficient. Too confidential to go into more detail. Compensation: $120k+ ID: C11370 General | Plant Manager/Operations - Truss/ Panel/Framing Package Relocation: Texas, Arizona 20 years' experience. Started in production, advanced to Saw Supervisor, Production Manager, Plant Manager, now General Manager. As General Manager operated a $125M truss plant. Tripled output and reduced errors and labor cost. Developed and implemented standards and procedures to manage quality and costs. As Plant Manager (4 years), manage all the operation of the manufacturing plant, such as Productivity, logistics, efficiencies, costs. As Production Manager (12 years), manage all the areas of the manufacturing across the plant. Safety, quality control, efficiencies, HR, etc... Software: MiTek, Word, Excel, OptiFrame. Products: R & F Truss, Panel, Framing package. Markets: Single Family, Multifamily, Custom Homes. Bilingual English/Spanish spoken and written. Degree in Industrial Engineering. Compensation: $90's+ bonus ($100k min) ID: C10897 Design Manager/Senior Designer/PE/ Optimizer - Truss/Panel/EWP Relocation: REMOTE 30 year industry veteran, started as a Truss Designer, earned his way to Design Manager over 20+ designers. MiTek - Advanced, AutoCAD proficient. BSCE - PE. Compensation: Open?? Thom's Notes: PE with Mid Atlantic seals ID: C18565 Designer: Truss/Panel, Wood/Steel, BIM Relocation: North Carolina Material take-offs, proposals, job-site meetings, Submittal Tracking, Excellent Problem-solving Skills, Material Ordering,
Read/Subscribe online at www.componentadvertiser.com
Need Help? We’re here when you need help! visit: www.thejobline.com email: twm@thejobline.com
STRICTLY CONFIDENTIAL!
Available Candidates Field Measuring, 3-D Modeling Program (3-D and 4-D BIM in-house), Generated material take-offs from the BIM model, Coordinated RFI's thru the BIM model, Clash detection between wood trusses, structural steel and LVL's. 3-D Scan's of job-sites. Scheduled / Distributed work to 6 designers Cross-trained all designers in roof floor and wall panels for whole-house design. ID: C18370 Plant | Location | General Manager - Truss/ Panel Relocation: California, Nevada Highly experienced (20+ years) roof and floor truss, and wall panel manufacturing manager. Started in the plant as builder, then sawyer, supervisor, truck driver, maintenance manager, designer, outside sales, plant manager, operations manager, and general manager. OSHA trained, developed and implemented safety programs. Successful turn around experience, hands on ability to work with departments to combine individual strengths into one team effort, lower costs, and meet quality and volume expectations. Past experience negotiating better vendor programs to lower costs and improve inventory turns. ID: C10507 Senior Management - Truss/Panel/Lumber/ Installed Services Relocation: USA - Western I am a Diverse driven individual seeking a position in the fast paced construction component industry where my professionalism in sales, business and leadership skills along with a strong proven background in, General Management, Operations, Sales Management, strategic alliances, business development, team building, P&L experience and Customer Satisfaction will play an integral part in growing new business, nurturing existing business or developing company operations to meet the highest level of efficiencies, standards and safety while having fun doing it! FAX: 800-524-4982
JobLine.com, inc.
The
Relocation: Maine, Massachusetts, New Hampshire, Ontario, Vermont As District Manager: Responsible for the financial performance of three wood truss and wall panel plants, two Millwork and door assembly facilities and one installed labor location in multiple states. Group revenues increased from $50 million/year in to $70 million per year. Devised a “buy versus make” purchasing protocol in to ensure that internal truss and Millwork plants were operating at capacity before using outside vendors that supplied similar products. Spearheaded a “hub and spoke” organizational structure for three truss plants. This plan optimized scarce design talent, reduced clerical expenses, and synchronized output at each plant. Restructured the installed labor division to include material estimators, lumber salespeople and cost accounting methods in 2005. The changes resulted in a 400k gain in profits. Drafted corporate training material for fall protection and new hire safety orientation. As General Manager: Won “Gold Store” award for exceeding company goals in profits, sales growth, and ROA. Served on a corporate manufacturing audit and operating performance team that made recommendations to under performing truss plants. Two of the facilities audited became “Gold Stores” the following year. When the sales of three district stores were allocated to the truss plant, the lost business ($1.5 million/year) was made up and organic sales grew by over 10%. Sales volume grew from $11 million per year to over $15 million per year. ID: C18387 Division Manager, VP Operations, President - Truss | Panel | Building Materials | Pro Dealer Relocation: Arizona, Colorado, Florida, Georgia, Hawaii, Maryland, Texas, USA South, Virginia, Washington DC, Wisconsin Executive level manager, VP, President with $1+B P&L responsibility. Lumber, building materials, trusses, wall panels, and CFS background. Inquire to discuss this candidate. ID: C18449 Estimator | Designer - Truss, Panel | Prior carpenter Relocation: Ohio, Pennsylvania Prepare and distribute estimates to competing bidders. Calculate labor, time, and material estimated per individual job. Read, analyze, and interpret residential and commercial blueprints. Ensure projects meet the proper building codes and standards for the industry. Communicate with prospective bidders both over the phone and in person. Design and engineer roof trusses, floor trusses, pre-fabricated wall panels, and EWP. Gained first-hand experience setting PHONE: 800-289-5627
800-289-JOBS www.thejobline.com
Available Candidates trusses in the field during prior construction Managed the master schedule based on job. Design roof systems to be most efficient sales orders, plant volume, and lead time and inexpensive when being constructed in through the Mitek Management Business the field. Design complete models in MiTek Application System. Sapphire. Design and engineer roof trusses Followed all orders through the process and transfer loads throughout the structure to insure OTD (on time delivery). as need. Also design and engineer beams Handled all phone communications from and hangers when necessary. the customer as it related to changes in the delivery schedule. ID: C12414 Batched jobs through the engineering Truss Designer | Wall Panel Designer | software to the component saws and truss All Hats building tables Relocation: Arizona Quality Assurance – WTCA/TPI Engineered panel and truss design, developed material take off for turnkey build up, worked in coordination with multiple plants and design teams, worked closely with material suppliers on take offs and estimating. I've worked for decades in the construction industry. Not only in new construction, but additions and remodels as well using innovative designs for added value and to drive down cost. In addition to experience with MiTek, Wallbuilder and other design software packages, I have extensive manual trig/math skills. I use these to back check questionable loads as well to design from scratch in the field when needed. I have also written tutorials for the training of others and checked other designer's work as a Design Manager at a Panel Plant. All things being equal, I love working in components whether designing, cutting, building or setting components at the site. ID: C18430 Truss Designer | Remote Truss Designer Relocation: USA - South, USA - Southwest, USA - ALL States Extensive experience in truss estimating and design. Proficient in designing roof and floor trusses for a variety of projects including: custom homes, track homes, multi-family, mega-multifamily, and light commercial projects. I always get everyone involved with the project like architect, engineers, homeowners, and sales personnel Many times I go to the job site for the convenience of the framer and see what kind of condition or changes they might have; this way we will be working on the same page. Also included in my experience is purchasing material, negotiating contracts, setting up deliveries, steel and cmu detailing for steel columns and beams, with almost 25 years of experience in the construction business. MiTek Sapphire. ID: C18412 Plant | Production | Operations Manager Truss/Panel Relocation: Georgia, South Carolina, Florida Oversaw all aspects of the manufacturing and shipping of wood truss component systems for the building industry: roofs, floors and wall panels; 2 shift operation; 8 million in sales.
ID: C18367 Wall Panel Designer | Remote Wall Panel Designer | Mega-Multifamily Relocation: Utah Remote wall panel design for medium to large scale MF. Remote estimating using MiTek Sapphire to get a more accurate material count. 100,000 - 500,000 sq ft MF projects primarily in the New England Market with the panel plant being in New Brunswick. Also worked on projects in the Arizona, Texas, and California markets. Compensation: $70's+ (45+- hours) ID: C18365 Intermediate Canadian Remote Truss Designer - Sapphire Relocation: Ontario Remote Truss Designer available.. Currently provides technical support and designs to lumber distributors for roof systems for residential and commercial applications. Provides technical assistance and support to the distribution staff to meet client demands for engineered wood structural applications. Ensures that wood truss fabricators, lumber distributors and specifiers have adhered to established building standards, codes and practices. Maintains extensive knowledge of structural analysis programs such as MiTek SAPPHIRE Structure design software. Analyze/prepare engineered wood designs and details for Design Engineer review and approval. Generate manufacturing information and quotations for sales team and management. Prepares the job for production. Canadian codes and standards experienced. ID: C15958 Operations/Plant Manager - Millwork | Doors | Ply | Flooring Relocation: Colorado, Illinois, Indiana, Iowa, Kansas, Kentucky, Minnesota, Missouri, Montana, Nebraska, Nevada, North Carolina, South Dakota, Tennessee, Virginia, Wyoming 30 years' experience starting in production and advancing to multi-plant operations manager. Door experience includes managing three Production Managers and five Production Supervisors, consisting of 300 hourly employees producing 11,000
Read/Subscribe online at www.componentadvertiser.com
August 2025 #17313 Page #154 doors and 10,000 face frames per day. Responsible for the manufacturing functions of all mill operations, five frame component machining cells, three frame assembly operations, four door component machining cells, three door assembly clamps, three door profiling lines, two wide belt sanding lines and specialty machining and assembly cells. Flooring experience: Responsible for all plant functions including budgeting and P&L. Managed six Department Managers: two Production Departments, Quality Assurance, Materials, Human Resources including SHE, and Plant Engineer/Maintenance Manager including the CI program. Their staffs consist of eleven Supervisors and 330 hourly employees. The door plant operation dries lumber, cuts dimension stock, assembles and sands the doors. The panel plant produces the veneered flat and raised center panels, by cutting engineered wood and veneer from flitch and pressing the veneer to the substrate. Both plants are equipped with finishing lines. ID: C15995 Truss Designer - MiTek Relocation: Florida Truss Designer. Primary duties: design, layout, optimization, and cutting/production documents. Secondary duties: checking others work. Software used: MiTek and AutoCAD. Component experience includes floor trusses and roof trusses. Market experience includes single family, multifamily, light commercial, and agriculture. My volume was varied depending on projects. 2 years experience, MiTek software. ID: C18277 Professional Engineer | Engineering Manager - Engineered Wood Products, Components Structural Hardware | Codes & Compliance Relocation: Maryland, Minnesota, North Carolina, Pennsylvania, South Carolina, USA - Eastern, Virginia, Washington DC Experienced and successful professional engineering manager with over 25 years experience in improving productivity and resolving structural problems for engineered wood product and truss manufacturers and developing innovative design software programs. Also skilled in building outstanding teams and relationships among sales, manufacturing, and engineering stakeholders. Highly educated with exceptional employment history & experience. ID: C18250 Remote Senior Light Gage Steel Truss/ Panel Designer. Relocation: Texas Top level Light Gage Steel Senior Remote
FAX: 800-524-4982
JobLine.com, inc.
The
Designer with Truss and Panel and well as metal frame commercial project experience. Alpine, Truswal and Keymark experience. ID: C17230 Remote Wall Panel Designer - Sapphire Relocation: Newfoundland My objective is to be part of a team/company and prove I am reliable, show my ability and my willingness to learn! In addition to being a newer wall panel designer, I have learned software such as Mitek Sapphire, Revit 2017, Bluebeam Revu 2016. I have recently done jobs such as designing garages and adding on additions to homes. Jobs I have worked in wall paneling include a massive wall panel job for the US (500,000+ SFT) and designed units for a senior complex. In addition to wall panels...I also add in blocking, windows, doors, etc. I also do bundling and paperwork as well. ID: C16152 Mega-Multifamily General Manager Relocation: Florida Mega-Multifamily General Manager. Apply to discuss this candidate. Highly confidential. ID: C11781 Truss Design Manager Relocation: New York Worked on the most complicated custom projects, commercial buildings, and apartment complexes. Quickly became a team leader and was considered company wide as an expert in truss framing and computer applications. Provided training for a group of 30 experienced component designers in topics including load tracking, truss and layout optimization, and hardware specification. Optimization training helped to reduced material costs by 5%. Developed departmental procedures to increase consistency and accuracy of all designs and estimates. Reduced errors on repetitive projects by 25% by creating the master project file database, which organized and provided fast and easy access to project information. Streamlined estimating process for commercial construction projects. Analyzed the final cost of completed projects and applied results to new estimates. Reduced estimating time by 75% Managed up to 10 designers/sales reps. Software: MiTek, AutoCAD. ID: C15999 Outside Sales - Truss | Wall Panel | EWP | Installed Sales Relocation: Alabama, Georgia, Kentucky, North Carolina, South Carolina, Tennessee, Virginia 16 years' experience in outside sales of trusses, wall panels, engineered wood components, stairs and other building materials. Projects range from tract to high volume multifamily apartments. Has developed new territory, improved sales in lagging markets, and met or exceeded sales goals in most years. Has turn key PHONE: 800-289-5627
August 2025 #17313 Page #155
800-289-JOBS www.thejobline.com
Available Candidates installed sales experience, and has limited As Senior Technical Services Engineer, design skills from the past. Please inquire I held the nation-wide responsibility for for additional information. Easy relocate. all light gauge cold-formed steel truss engineering including field applied repair ID: C15857 design. I provided technical advice and Senior Truss Designer | Remote Truss counsel to our staff and functioned as a Designer | Design Manager subject matter expert (SME) for all three Relocation: California product divisions. As a result, I augmented my professional registrations to include 38 Truss Designer. Primary duties: design, States, 1 District, and 1 Canadian Province. layout, optimization, cutting/production ID: C14490 documents, and takeoff. Secondary duties: General Manager | Operations Manager | checking others work, scheduling, repairs, Turn Around customer service, inside sales, and field Relocation: Colorado, Delaware, Illinois, measurements. Software used: MiTek and Indiana, Iowa, Kentucky, Maryland, AutoCAD. Component experience includes Michigan, New Jersey, New York, North floor trusses, roof trusses, I-Joists, EWP, and Carolina, Ohio, Pennsylvania, Tennessee, hardware. Market experience includes tract, Virginia, Washington DC, West Virginia, single family, single family custom, multi- Arkansas, Massachusetts, Minnesota, family, and light commercial. My volume Missouri, Montana, North Dakota, Rhode was varied depending on projects. Has used Island, South Carolina, South Dakota, Texas, MiTek, Alpine, AutoCAD, and Microsoft Wisconsin, Florida, Georgia, Idaho, Kansas Office programs. Full P&L turnaround of a family owned light The candidate has been out of the industry, working in parallel jobs, and wants to return to a design position. Scored Senior Designer using an HP calculator, 8 years after his last truss design job. Speed was faster than average too. It may take a little time for him to get up to speed on the latest software. Ranked 5 out of 5 in our system. ID: C10810 Designer/Inside Sales - Truss Relocation: Virginia 6 years design experience, 1 inside sales. Primary duties: design, layout, optimization, cutting/production documents, and takeoff. Secondary duties: scheduling, repairs, customer service, inside sales, and field measurements. Software used: MiTek, AutoCAD, and CAD - Other. Component experience includes floor trusses and roof trusses. Market experience includes tract, single family, single family custom, multifamily, light commercial, and agriculture. My volume was varied depending on projects. Past carpenter and framer. Has an engineering related associates degree/ drafting Compensation: $45k+
gage steel panel manufacturing company. Turned it form a mom and pop, into a large, functioning manufacturing company that had systems, KPI programs, personnel development, and a growing customer base. Ready to help take your company to the next level. ID: C11976 Design/Estimating/Sales - Truss/LGS Relocation: New York Experienced wood & cold formed steel truss designer with 12 years experience using MiTek Industries and Aegis Metal Framing products and software. Seasoned sales professional with 8 years experience selling; wood roof & floor trusses and accessories, metal roof trusses and accessories, and the sale of component design and engineering services. A highly motivated designer and sales person with a proven track record for achieving excellence, building long term business relationships, and providing impeccable service to contractors, engineers, architects, and developers throughout New York and New England. Specialize in design build and defense contracting from early pre-bid/qualification stages through installation.
ID: C15679 LGS Truss & Panel PE Relocation: USA - Eastern, USA - South
ID: C11895 Designer - Truss/I-Joists, EWP Relocation: California, USA - ALL States, Texas, Alaska
As Engineering Manager I was responsible for oversight of all technical and engineering engagements. Design of light gauge metal trusses, wall panels, shear walls, for hotels, retirement homes and other commercial and residential structures. Making jobs viable by replacing red-iron with light gauge metal was key to solidifying more projects. I was actively engaged in computer software development of truss design and coordinating overseas programming efforts into truss layout.
Designer. Primary duties: design and cutting/production documents. Secondary duties: checking others work and field measurements. Software used: Alpine and MiTek. Component experience includes floor trusses, roof trusses, I-Joists, EWP, and hardware. Market experience includes single family, single family custom, multifamily, and light commercial. BS Civil Engineering. Software: Alpine, MiTek, AutoCAD, Word, Excel.
ID: C10324 Read/Subscribe online at www.componentadvertiser.com
Plant Manager/Designer/Design Manager/?? - Truss/Panel/Installed Relocation: Georgia As Location Manager, managed one estimator, four designers, a secretary/ data entry person, and a shop of 40 truss production employees. As Senior Designer, primary duties: design, layout, optimization, and takeoff. Secondary duties: checking others work, scheduling, repairs, customer service, and training. Software used: Alpine and AutoCAD. Component experience includes floor trusses, roof trusses, wall panels, framed openings, I-Joists, EWP, hardware, lumber, and complete framing package. Market experience includes tract, single family, single family custom, multifamily, and light commercial. Thom's Notes: Very experienced, willing to wear many hats.
JobLine.com, inc.
The
800-289-JOBS
Time To Hire? We’re here when you need help! visit: www.thejobline.com email: twm@thejobline.com
STRICTLY CONFIDENTIAL!
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Industry News
August 2025 #17313 Page #156
Builder Confidence Edges Up in July
Posted July 17, 2025 on NAHB Now | The News Blog of the National Association of Home Builders Reprinted with permission. Builder confidence for future sales expectations received a slight boost in July with the passage of the One Big Beautiful Bill Act but elevated interest rates and economic and policy uncertainty continue to act as headwinds for the housing sector. Builder confidence in the market for newly built single-family homes was 33 in July, up one point from June, according to the National Association of Home Builders (NAHB)/ Wells Fargo Housing Market Index (HMI) released today. Builder sentiment has now been in negative territory for 15 consecutive months. “The passage of the One Big Beautiful Bill Act provided a number of important wins for households, home builders and small businesses,” said NAHB Chairman Buddy Hughes, a home builder and developer from Lexington, N.C. “While this new law should provide economic momentum after a disappointing spring, the housing sector has weakened in 2025 due to poor affordability conditions, particularly from elevated interest rates.” Indeed, the latest HMI survey also revealed that 38% of builders reported cutting prices in July, the highest percentage since NAHB began tracking this figure on a monthly basis in 2022. This compares with 37% of builders who reported cutting prices in June, 34% in May and 29% in April. Meanwhile, the average price reduction was 5% in July, the same as it’s been every month since last November. The use of sales incentives was 62% in July, unchanged from June. “Single-family housing starts will post a decline in 2025 due to ongoing housing affordability challenges,” said NAHB Chief Economist Robert Dietz. “Single-family permits are down 6% on a year-to-date basis and builder traffic in the HMI is at a more than two-year low.” The HMI index gauging current sales conditions rose one point in July to a level of 36 while the component measuring sales expectations in the next six months increased three points to 43. The gauge charting traffic of prospective buyers posted a one-point decline to 20, the lowest reading since end of 2022. Looking at the three-month moving averages for regional HMI scores, the Northeast increased two points to 45, the Midwest held steady at 41, the South dropped three points to 30 and the West declined three points to 25. HMI tables can be found at nahb.org/hmi. More information on housing statistics is also available at Housing Economics PLUS.
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Industry News
August 2025 #17313 Page #157
Use NAHB Resources to Protect Workers from Heat and UV Exposure Posted July 1, 2025 on NAHB Now | The News Blog of the National Association of Home Builders Reprinted with permission. As NAHB celebrates UV Safety Awareness Month in July, it is important for home builders and general contractors to educate workers about the potential risks associated with ultraviolet (UV) radiation, and have plans and resources in place to keep them safe on the jobsite. Why UV Awareness Matters UV radiation can come from both natural and artificial sources. The sun is the main source of exposure for most people and specifically those working in construction. Overexposure of UV radiation can lead to serious health issues, including sunburn, skin cancer, premature aging and eye damage. UV Safety Awareness Month serves as a timely reminder to protect workers against these risks. Practical Tips for UV and Heat Stress Protection As UV intensity is typically at its strongest and temperatures begin to climb during the summer, workers can better protect themselves from sun and UV exposure with the following recommendations: • • • • • •
Wear sunscreen with a minimum of SPF 15 and apply it to all uncovered skin — especially your nose, ears, neck, hands, feet and lips. Reapply every two hours or more often depending on the level of activity. Avoid extensive periods in the sun, seek shade as needed and limit time in the sun between 10 a.m. and 4 p.m. when UV rays are the most intense. Wear protective clothing that covers your arms and legs. Wide-brimmed hats and sunglasses with UV protection are also crucial. Review the UV index before the beginning of each shift. Avoid artificial UV sources, including tanning beds, lasers, mercury vapor lighting, halogen and fluorescent lighting. Understand basic first aid and heat stress response measures, which can be found in NAHB’s Video Toolbox Talk on heat stress safety and on the NIOSH website.
Spreading Awareness to Workers Understanding the basics of sun safety can help prevent injuries and illnesses. More information on what employers and workers can do to stay safe can be found in NAHB’s Heat Stress Safety Toolkit. Additional Resources OSHA Heat Illness Prevention Campaign NIOSH Fast Facts: Protecting Yourself from Sun Exposure National Weather Service: Protect Yourself, Family and Pets from Excessive Ultraviolet (UV) Radiation National Weather Service: Ultraviolet (UV) Index Forecasts PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Industry News
August 2025 #17313 Page #158
New Home Sales Hold Steady at a Relatively Tepid Level Posted July 24, 2025 on NAHB Now | The News Blog of the National Association of Home Builders Reprinted with permission.
Challenging affordability conditions, elevated interest rates and economic uncertainty continue to act as headwinds on the housing sector as many potential buyers continue to stay on the sidelines. Sales of newly built single-family homes edged 0.6% higher in June, rising to a seasonally adjusted annual rate of 627,000, according to newly released data from the U.S. Department of Housing and Urban Development and the U.S. Census Bureau. The past two months have been the slowest sales pace since October of last year, as mortgage rates averaged above 6.8% in June. “New home sales remained flat last month, highlighting persistent weakness in the housing market despite seasonal expectations for growth,” said Buddy Hughes, chairman of the National Association of Home Builders (NAHB) and a home builder and developer from Lexington, N.C. “Elevated mortgage rates and sustained price levels continue to limit purchasing power, particularly among first-time and middle-income buyers.” “Despite targeted incentives and pricing adjustments by builders, demand remains tepid, suggesting these measures have had limited impact on overall sales volume,” said Danushka Nanayakkara-Skillington, NAHB’s assistant vice president for forecasting and analysis. And while inventory conditions have stabilized, the flat performance signals continued buyer hesitation and a cautious outlook for the sector. Unless there is a material improvement in financing conditions or household income growth, a near-term acceleration in new home sales appears unlikely.” A new home sale occurs when a sales contract is signed, or a deposit is accepted. The home can be in any stage of construction: not yet started, under construction or completed. In addition to adjusting for seasonal effects, the June reading of 627,000 units is the number of homes that would sell if this pace continued for the next 12 months. New single-family home inventory continued to rise with 511,000 residences marketed for sale as of June. This is 1.2% higher than the previous month, and 8.5% higher than a year ago. At the current sales pace, the months’ supply for new homes remained elevated at 9.8 compared to 8.4 a year ago. Completed, ready-to-occupy inventory stood at 114,000 homes in June, up 21.3% from a year ago. The median new home sale price edged down 4.9% in June to $401,800. This is down 2.9% compared to a year ago. Regionally, on a year-to-date basis, new home sales are down in all four regions, falling 25.6% in the Northeast, 8.5% in the Midwest, 1.6% in the South and 4% in the West.
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Industry News
August 2025 #17313 Page #159
Single-Family Starts Weaken in June as Affordability Challenges Persist Posted July 18, 2025 on NAHB Now | The News Blog of the National Association of Home Builders Reprinted with permission.
Single-family housing starts declined in June to the lowest rate since July 2024 as elevated interest rates, rising inventories and ongoing supply-side issues continue to act as headwinds for the housing sector. Due to a solid increase in multifamily production, overall housing starts increased 4.6% in June to a seasonally adjusted annual rate of 1.32 million units, according to a report from the U.S. Department of Housing and Urban Development and the U.S. Census Bureau. The June reading of 1.32 million starts is the number of housing units builders would begin if development kept this pace for the next 12 months. Within this overall number, singlefamily starts decreased 4.6% to an 883,000 seasonally adjusted annual rate and are down 10% compared to June 2024. The multifamily sector, which includes apartment buildings and condos, increased 30% to an annualized 438,000 pace. “Single-family building conditions continued to weaken in June as housing affordability challenges caused builder traffic to move lower as buyers moved to the sidelines,” said Buddy Hughes, chairman of the National Association of Home Builders (NAHB) and a home builder and developer from Lexington, N.C. “Policymakers need to focus on easing high housing costs by eliminating burdensome regulations, promoting careers in the skilled trades, alleviating permitting roadblocks and overturning inefficient zoning rules.” “Single-family conditions are measurably weakening as resale inventories levels rise, particularly in previously fastgrowing areas such as the U.S. south,” said NAHB Chief Economist Robert Dietz. “Single-family home building in the South is down 12.4% on a year-to-date basis, far outpacing declines in the Northeast and the West. However, single-family home building is up 10% on a year-to-date basis in the Midwest, where housing affordability conditions are generally better than much of the nation.” On a regional and year-to-date basis, combined single-family and multifamily starts were 28.8% higher in the Northeast, 13.1% higher in the Midwest, 8.1% lower in the South and 0.6% lower in the West. Overall permits increased 0.2% to a 1.40-million-unit annualized rate in June. Single-family permits decreased 3.7% to an 866,000-unit rate and are down 8.4% compared to June 2024. Multifamily permits increased 7.3% to a 531,000 pace. Looking at regional permit data on a year-to-date basis, permits were 16.9% lower in the Northeast, 8.2% higher in the Midwest, 3.3% lower in the South and 3.7% lower in the West. The declines for single-family home building have caused the number of single-family homes under construction to level off. There are currently 622,000 single-family homes under construction, which is 6% lower than a year ago. The number of apartments under construction in June, 739,000, is 18.8% lower than a year ago.
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Industry News
August 2025 #17313 Page #160
West Fraser Announces Second Quarter 2025 Results July 23, 2025—West Fraser Timber Co. Ltd. reported the second quarter results of 2025. All dollar amounts in this news release are expressed in U.S. dollars unless noted otherwise. Second Quarter Highlights • • • • • • • • •
Sales of $1.532 billion and earnings of $(24) million, or $(0.38) per diluted share Adjusted EBITDA1 of $84 million, representing 6% of sales Lumber segment Adjusted EBITDA1 of $15 million North America Engineered Wood Products segment Adjusted EBITDA1 of $68 million Pulp & Paper segment Adjusted EBITDA1 of $(1) million Europe Engineered Wood Products segment Adjusted EBITDA1 of $2 million Renewed and extended $1 billion credit facility and increased and extended $300 million term loan Repurchased 448,001 shares for aggregate consideration of $33 million Released 2024 Sustainability Report
“Demand for many of our wood-based building products slowed in the second quarter as spring building activity fell short of our expectations. This was more acute in our NA EWP segment, which experienced further easing of demand as the quarter progressed, consistent with government data pointing to softer U.S. new home construction,” said Sean McLaren, West Fraser’s President and CEO. “However, while uncertainty for wood building products demand persists given ongoing housing affordability challenges and the lingering prospects of higher lumber duties and tariffs on many of our products, it is important to note that we are taking action to ensure our operations are flexible, sized to meet the needs of our customers, and that they continue to be managed with a strong focus on controlling costs. Further, we continue to evaluate mill investments that upgrade our portfolio and generate returns above our cost of capital, all while maintaining strong liquidity and a balance sheet that allows us to pursue a balanced capital allocation strategy and opportunistic growth objectives should they meet our long-term strategy.” Results Summary Second quarter sales were $1.532 billion, compared to $1.459 billion in the first quarter of 2025. Second quarter earnings were $(24) million, or $(0.38) per diluted share, compared to earnings of $42 million, or $0.46 per diluted share in the first quarter of 2025. Second quarter Adjusted EBITDA was $84 million compared to $195 million in the first quarter of 2025. For the complete report, including the impact of tariffs and the market outlook, read the full press report online.
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Industry News
August 2025 #17313 Page #161
UFP Industries Announces 2025 Second Quarter Results July 28, 2025—UFP Industries, Inc. a leading manufacturer focused on delivering value-added products across its Retail, Packaging, and Construction segments reported results for the second quarter ended June, 28, 2025, including net sales of $1.84 billion, net earnings attributable to controlling interests of $100.7 million, earnings per diluted share of $1.70, and adjusted EBITDA of $174.1 million. Results for the quarter include impairment charges and one-time tax benefits which each amount to $0.05 per diluted share and offset one another. “Our second quarter was largely a continuation from our first quarter as visibility remains limited, tariff uncertainty remains a challenge for consumer and business sentiment, and end market demand remains soft but stable. Despite the current environment, we continue to make progress positioning UFP as a leaner and faster growing enterprise for when markets recover,” said Will Schwartz UFP Industries CEO. “I want to thank each of our employees for their continued dedication and willingness to make the difficult but necessary business decisions during these uncertain times. We remain on target to realize approximately $60 million of structural cost savings by year-end 2026 and will continue to evaluate all aspects of our business to drive additional margin improvement.” “Looking ahead, we remain focused on driving innovation across the portfolio and making strategic investments to drive growth and profitability. Our long-term capital plans are focused on investing in our most attractive opportunities for growth, margin, and returns. We are also actively pursuing M&A transactions that complement our core capabilities. Our strong balance sheet and free cash flow generation remain competitive advantages, enabling us to pursue strategic investments, along with share repurchases and dividends, while maintaining a conservative capital structure.” Second Quarter 2025 Highlights (comparisons on a year-over-year basis except where noted): • Net Sales of $1.84 billion decreased by 4 percent due to a 1 percent decrease in price and a 3 percent decline in organic units. • New product sales of $129.1 million were 7.0 percent of total net sales compared to 6.7 percent in the second quarter of 2024. • Net Earnings of $100.7 million declined from $126.0 million a year ago. • Adjusted EBITDA1 was $174.1 million in the quarter, or 9.5% percent of net sales, compared to $203.9 million, or 10.7 percent of net sales, for the same period a year ago. UFP Construction Net sales of $551.6 million were down 4 percent compared to the second quarter of 2024 as a 6 percent decrease in selling prices was partially offset by an organic unit sales increase of 2 percent. Organic unit sales increased 8 percent in Factory Built due to higher industry production, market share gains, new products, and expanded capabilities. Organic unit sales increased 6 percent in Commercial and 11 percent in Concrete Forming. Site Built Housing volumes decreased 7 percent due to softer demand. Gross profit for the Construction segment was $100.2 million, or 18.2 percent of net sales, compared to $125.6 million, or 21.9 percent of net sales, in the second quarter last year. The decrease in gross profit was primarily driven by lower unit sales and more competitive pricing in our Site Built business unit. Favorable volumes in both the Concrete Forming Solutions and Factory Built businesses each supported year over year gross profit growth in the quarter. Read the complete press release online PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Industry News
August 2025 #17313 Page #162
A-1 Industries of Georgia Repeats as Best Local Manufacturer
BAINBRIDGE, GA. – July 14, 2025 –A-1 Industries of Georgia, LLC, a subsidiary of A-1 Global Holdings, Inc., proudly announces that it has been named the 2025 Best Local Manufacturer in the annual Best of Bainbridge Readers’ Choice Awards, hosted by The Post-Searchlight. This marks the second consecutive year A-1 has earned this distinction. “We are deeply honored by this backto-back recognition,” said Jan S. Beck, President of A-1 Global Holdings. “It reflects the incredible work ethic and dedication of our employee-owners in Georgia and Florida and the strong support we continue to receive from the Bainbridge-Decatur County community.” Since beginning operations in Georgia, A-1 has experienced rapid growth and deepened its connection to the local community through workforce investment, participation in civic initiatives, and community partnerships. As an employee-owned company, A-1’s culture emphasizes innovation, shared success, and continuous improvement. “This recognition speaks to the culture we’ve built and the people who bring it to life every day,” said Miguel A. Amiuny, Vice President and COO of A-1 Global Holdings. “We’re proud of our team and grateful for the community that supports us.” A-1 thanks The Post-Searchlight, the Bainbridge, Georgia community, and all who voted for their continued trust. The Company looks forward to many more years of partnership, progress, and shared achievement in the region.
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Industry News
August 2025 #17313 Page #163
A-1 Industries of Florida Named Runner-Up in SFMA 2025 Manufacturer of the Year Awards FORT PIERCE, Fla. – June 30, 2025 – A-1 Industries of Florida, Inc., a subsidiary of A-1 Global Holdings, Inc., proudly announces that it was named Runner-Up in the Manufacturer of the Year – Trailblazers Category at the 2025 Recognition of Excellence Awards, hosted by the South Florida Manufacturers Association (SFMA). The annual event, held on June 26 in Pembroke Pines, Florida, honors companies and individuals leading the way in innovation, operational excellence, and manufacturing leadership. “We’re proud to be recognized among the most forward-thinking manufacturers in the Southeastern U.S.,” said Jan S. Beck, President of A-1 Global Holdings. “This honor reflects the dedication of our entire team and reinforces our mission of Using Technology to Change the Way America Builds Homes™.” A-1 was selected from nearly 180 nominations, earning its place in the Trailblazers Category for companies that are setting new standards through innovation, impact, and growth. As part of this recognition, eight A-1 employees were also nominated for Employee of the Year awards based on their outstanding contributions and embodiment of A-1’s Core Values: Own It, Passionate, Honesty, and Respect. The 2025 Employee of the Year nominees included Ariel Arias Perez, Enrique Rodriguez, Giovanni Martinez, Jose Ramos, Leticia Fernandez, Michael Fagan, Milagros Estrada, and Paulo Capelo. “These individuals exemplify the leadership, creativity, and operational strength that drive our continued growth,” Beck added. “Their contributions reflect the culture of excellence that sets A-1 apart in the manufacturing sector.” A-1 looks forward to returning to the SFMA awards in 2026—stronger than ever. About A-1 Global Holdings Founded in 1977, A-1 is a leading manufacturer of pre-engineered wood trusses and its proprietary EZWALL® Innovative Framing Solution™. Dedicated to excellence in manufacturing, sustainability, and customer service, the Company reorganized in December 2022 as A-1 Global Holdings, Inc., the parent Company for A-1 Industries of Florida, Inc., and A-1 Industries of Georgia, LLC. A-1 operates state-of-the-art manufacturing facilities in Fort Pierce, Florida, and Bainbridge, Georgia. All employees are eligible to participate in the Company’s Employee Stock Ownership Plan (ESOP).
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Industry News
August 2025 #17313 Page #164
SBCA Unveils Restructured Professional Membership Program to Strengthen Industry Connections IRVING, TX – July 8, 2025 – The Structural Building Components Association (SBCA) has restructured and expanded its Professional Membership program to provide targeted value to engineers, architects, code officials, draftspersons, and others whose work is critical to the success of structural framing. This member initiative is designed to facilitate greater collaboration and communication between these key professionals and component manufacturers (CMs) by providing tools and resources that will make their jobs easier and more efficient. Whether these professionals are specifying trusses, reviewing plans, inspecting installations, or designing for structural performance, SBCA’s goal is to connect Professional Members with the people, knowledge, and resources that are driving best practices in structural framing today. Going forward, SBCA’s Professional Members will gain access to SBCA’s growing technical resource library, exclusive continuing education (CEU) courses, structural detail guides, live educational events, and member-only virtual roundtables that foster direct collaboration with peers and CMs. These benefits are specifically tailored to help professionals solve today’s design challenges, efficiently meet code requirements, and improve communication throughout the supply chain. Joining SBCA as a Professional Member also provides integrated access to a national network of manufacturers and suppliers committed to advancing best practices, promoting cost-effective innovation, and fostering greater collaboration between design and construction disciplines that result in more successful projects. For more information on SBCA membership, visit www.sbcacomponents.com/membership-information. About SBCA The Structural Building Components Association (SBCA) is a trade association representing manufacturers of structural building components. Its membership also includes truss plate suppliers, original equipment manufacturers and resellers, computer software companies, lumber suppliers, builders, and professional individuals in various fields, including engineering, marketing, and management. SBCA provides services its membership needs to continue expanding the market share of all structural building components by promoting the common interests of those engaged in manufacturing trusses, wall panels, and related structural components; to ensure growth, continuity, and increased professionalism, which will strengthen the structural building component manufacturing industry’s influence. www. sbcacomponents.com
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Industry News
August 2025 #17313 Page #165
Simpson Strong-Tie Awards Scholarships to 120 College Students
June 26, 2025—Simpson Strong-Tie, the leader in engineered structural connectors and building solutions, announced the winners of its 2025– 2026 Student Scholarship program, a part of the company’s Strong-Tie Undergraduate Fellowship. The company awarded $3,000 scholarships to 120 college juniors and seniors studying architecture, structural and civil engineering, or construction management. The annual scholarship encourages the design and building of safer structures in our communities by supporting education for US students in engineering, design and construction majors. Scholarship recipients also become part of the Strong-Tie Undergraduate Fellowship, which provides access to industry contacts, training, job leads, peerto-peer connection and community to help build their knowledge and networks as they prepare for their careers. “The continued success of the building industry, and Simpson Strong-Tie itself, depends on supporting the next generation of engineers, designers and builders,” said Simpson Strong-Tie CEO Mike Olosky. “We’re proud to contribute to these efforts year after year through the scholarships as well as the learning and networking opportunities provided by our fellowship program.” The full list of scholarship recipients and their respective schools can be viewed online. The Simpson Strong-Tie Student Scholarship program began in 1999. Since then, the company has awarded more than $2.1 million to more than 1,200 students across the country. The Simpson Strong-Tie Student Scholarship is administered by Scholarship America, the nation’s largest designer and manager of scholarship and tuition reimbursement programs for corporations, foundations, associations and individuals. Learn more at strongtie.com/scholarships.
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Industry News
August 2025 #17313 Page #166
Toll Brothers Annual Gala Raises Over $1.2 Million for HomeAid to Help Build a Future Without Homelessness PHILADELPHIA, PA—Toll Brothers, Inc., the nation’s leading builder of luxury homes, recently honored HomeAid at its 31st Annual Gala, held at the historic Water Works venue in Philadelphia. The highly anticipated fundraising event raised $1.2 million in support of HomeAid, a national nonprofit organization with 19 affiliates across the U.S., dedicated to helping individuals experiencing or at risk of homelessness rebuild their lives through construction, community engagement, and education. The theme of the evening, “All Together Now,” was brought to life by hundreds of Toll Brothers employees, HomeAid America staff, national partners, community leaders, and philanthropists who gathered to celebrate the power of partnership and purpose. The evening included an inspiring program featuring remarks from Toll Brothers Chairman and Chief Executive Officer Douglas C. Yearley, Jr. and HomeAid America Chief Executive Officer Scott Larson, followed by a moving video presentation, a live auction, and a paddle raise in support of HomeAid’s mission. “HomeAid is a truly remarkable organization that’s uniquely connected to the work we do every day in homebuilding,” said Douglas C. Yearley, Jr., Toll Brothers Chairman and Chief Executive Officer. “Our employees have proudly supported HomeAid for years, serving on local boards and spearheading transformative projects for the community. We’re now excited to deepen our relationship with HomeAid by making them the beneficiary of our annual fundraising efforts.” Over the past 36 years, HomeAid and its affiliates have partnered with builders like Toll Brothers to complete nearly 1,500 housing and outreach projects, providing more than 15,000 beds and serving close to 900,000 individuals in need. Proceeds from this year’s Gala will directly support the construction and renovation of safe, dignified housing and programmatic facilities, as well as critical outreach and educational initiatives across the country. “This Gala was more than a celebration – it was a catalyst for impact. The generosity shown by Toll Brothers and everyone who contributed will help us expand our work into new communities and deepen our support where the need is greatest. We are humbled by the shared commitment to building a future without homelessness, and incredibly grateful to be walking this path together,” said Scott Larson, HomeAid America Chief Executive Officer. This year’s event also marks a major step forward in HomeAid’s expansion efforts, including plans to launch a new affiliate in the Delaware Valley and explore growth into Tennessee and the Carolinas - regions where Toll Brothers builds and where the need for housing solutions is pressing. The Toll Brothers Annual Gala continues to make a meaningful impact, underscoring the strength of purposedriven partnerships and the profound change that can be made when we come together – all together now.
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Industry News
August 2025 #17313 Page #167
Do it Best Foundation Raises Record $1.36 Million at Fore the Cause Golf Tournament June 30, 2025—The Do it Best Foundation hosted its fifth annual Fore the Cause golf tournament on June 9, raising a record-breaking $1.36 million to support nonprofit organizations across the country and surpassing its fundraising goal of $1.25 million. A record 460 golfers, including Do it Best suppliers, vendors and partners, participated in the event, which was held across four of Fort Wayne’s premier golf courses: Fort Wayne Country Club, Orchard Ridge, Pine Valley and Sycamore Hills. The tournament supports the Foundation’s mission to fund nonprofit organizations and agencies that serve children, families and underserved communities nationwide. “This event continues to grow in both impact and enthusiasm each year, and we’re incredibly grateful for the generosity shown by our partners and community,” said Curtis Smith, executive director of the Do it Best Foundation. “What makes it even more meaningful is that every dollar raised comes into Fort Wayne and is then distributed to incredible nonprofit organizations serving communities locally and across the country. It’s a powerful way to give back and a beautiful picture of collective generosity.” At the kickoff event, the Do it Best Foundation unveiled a new logo and website, aligning its visual identity with the broader Do it Best Group. The Foundation remains focused on its mission to support nonprofit community organizations dedicated to serving others, with a special emphasis on four key areas: health and wellness, youth enrichment, the arts and community development. Since its founding in 2019, the Foundation has awarded nearly $2 million in grants to organizations across the country, advancing efforts to uplift children, families and underserved communities. Planning is already underway for next year’s tournament, scheduled for June 8, 2026. About the Do it Best Foundation The Do it Best Foundation supports not-for-profit community organizations that focus on serving the needs of others. Rooted in servant leadership, the Foundation awards grants to agencies that can make big impacts in four key areas: health & wellness, youth enrichment, the arts, and the community. Nonprofit organizations located in or near cities where Do it Best has business operations are given priority consideration. To learn how you can support the work of the Do it Best Foundation, follow us on Instagram and visit www.doitbestfoundation.org. About Do it Best Based in Fort Wayne, IN, Do it Best is the only US-based, member-owned comprehensive and fully integrated hardware, lumber, and building materials buying cooperative in the home improvement industry. With annual sales of nearly $5 billion, Do it Best serves thousands of member-owned locations across the United States and in more than 50 other countries. To learn more, visit www.doitbestonline.com and follow us on Facebook, Instagram, LinkedIn, and X.
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Industry News
August 2025 #17313 Page #168
RONA Foundation Will Award $1.3 Million to Eight Canadian Non-Profit Organizations as Part of its Building with Heart 2025 Program July 8, 2025—The RONA Foundation, which oversees the philanthropic activities of RONA Inc., a leader in the home improvement sector in Canada, operating and serving some 425 corporate and affiliated stores, will award a total of $1.3 million to eight non-profit organizations (NPOs) across the country as part of its Building with Heart 2025 program. Launched in 2023, this initiative aims to financially support NPOs with a project aimed at revitalizing a living environment or facilitating access to housing for victims of domestic violence and their children, low-income families and people with special needs or mental health issues. The recipient organizations were selected earlier this year following a call for applications. The projects were reviewed by a selection committee, which selected them using a rigorous evaluation framework. “At the RONA Foundation, we are committed to improving the daily lives of the communities in which we are involved. In a context where access to housing represents a major challenge and increases the vulnerability of many Canadian populations, we are committed to helping them,” says Catherine Laporte, Chair of the Board of Directors of the RONA Foundation and Senior Vice President, Marketing and Customer Experience at RONA. “The success of all the initiatives that have been put forward is an incredible demonstration of solidarity,” says Josée Lafitte, Director of the Foundation. “Thank you to our partners, clients, and donors. Every gesture counts. I would like to express my sincere gratitude to each of them for their generosity and support. Together, we are making a difference.” To learn more about the projects of organizations that will receive funding through the Building with Heart program, visit https://www.ronainc.ca/en/corporate-responsibility/communities/our-campaigns. About the RONA Foundation The RONA Foundation is a charitable organization created in 1998. On the occasion of its 25th anniversary in 2023, the RONA Foundation redefined its mission: to help improve the quality of life of Canadians in need by revitalizing their living environments or facilitating access to housing. It seeks in particular to help victims of domestic violence and their children, low-income families, people with special needs or people living with mental health issues. https:// www.ronainc.ca. About RONA Inc. RONA Inc. is a leader in the Canadian home improvement sector, headquartered in Boucherville, Quebec. The RONA Inc. network operates or services some 425 corporate and affiliated stores under the RONA+, RONA, Réno-Dépôt and Dick’s Lumber banners. With a long and rich history, RONA Inc. has been supporting Canadians in their renovation and construction projects since 1939. To achieve this, the company relies on a team of 21,000 employees, to whom it strives to provide an inclusive workplace where everyone is invited to make a contribution. RONA Inc. has been listed as one of the top employers in the Montreal region since 2021. In addition, thanks to its ongoing efforts in sustainable development, the company is recognized as one of the greenest employers in Canada. https://www.ronainc.ca.
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Industry News
Component Manufacturing dverti$ dverti $ er
August 2025 #17313 Page #169
Westcap Announces Second Strategic Acquisition for Timber-Tech Truss July 9, 2025—Westcap Mgt. Ltd. is pleased to announce that its portfolio company, Timber-Tech Truss Limited Partnership, has acquired Darmac Framing Systems. Westcap completed its initial platform investment in Timber-Tech in December 2023 through Westcap MBO III Investment LP, its third buyout fund focused on succession and growth opportunities in Western Canada. Headquartered in Calgary, Alberta, Timber-Tech has four decades of experience as a leading provider of engineered truss systems and engineered wood products, servicing customers throughout Western Canada. In July 2024, Timber-Tech acquired Brydon Stairs Ltd., which diversified the company’s product offerings to its broad suite of customers, and today it completed its second strategic acquisition since joining the Westcap portfolio of companies only 18 months prior. Operating in Balzac, Alberta, Darmac is a leader in the fabrication of panelized and modular building components for residential construction. Darmac offers complete framing packages, including both material supply and on-site installation, operating from its 40,000 square foot facility with over 50 employees. The company manufactures a range of products, including prefabricated walls and floor systems that are precision-engineered, ensuring consistently high quality, dimensional accuracy and structural integrity. “Timber-Tech’s ability to execute its aggressive, organic and acquisition-based growth strategies, which are also aligned with strong sector tailwinds, was a key factor in our decision to invest in this platform company only 18 months ago,” said Mr. Grant J. Kook, President and CEO of Westcap. Ms. Wendy Murphy, Chief Executive Officer of Timber-Tech indicates, “The acquisition of Darmac enables Timber- Tech to now provide the entire structural package for a new home and meet both the federal government’s mandate and the market’s desire for prefab construction. Since Westcap’s partnership we have seen exciting growth in aggregated top line revenues and our team of 82 key members double in size to now 172.” About Westcap Mgt. Ltd. Founded over 25 years ago, Westcap is a leading private equity and venture capital fund manager with over $1 billion in assets under management. Westcap has an uncompromising vision to build long-term value for investors by supporting visionary management teams in their growth and succession strategies. Our vast network of strategic partners and long history of success across Western Canada is grounded by our strong culture and integrity. About Timber-Tech Truss Limited Partnership Founded in 1980, Timber-Tech is a leading provider of engineered truss systems and engineered wood products, servicing customers throughout Western Canada. The company has a long-standing reputation of credibility and reliability and has grown to operate three manufacturing facilities, located in Lethbridge, Calgary and Medicine Hat, with 52,000 square feet of combined manufacturing space.
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Industry News
August 2025 #17313 Page #170
Statistics Canada: Investment in Building Construction, May 2025
July 18, 2025—The total value of investment in building construction decreased by $491.4 million to $21.8 billion in May. Investment in the residential sector fell 3.0%, while the non-residential sector edged down 0.4%. On a constant dollar basis (2023=100), the total value of investment in building construction in May was down 2.3% from the previous month and was up 3.1% on a year-over-year basis. Multi-unit component leads residential construction decline Investment in residential building construction declined by $462.6 million to $15.0 billion in May. Losses were recorded in the construction of both multi-unit dwellings (-3.4%) and single-family homes (-2.5%). In May, investment in multi-unit construction dropped by $295.2 million to $8.5 billion. The monthly decline was largely attributed to Ontario (-$166.4 million) and Quebec (-$159.0 million). Meanwhile, Alberta (+$50.4 million) saw notable gains, followed by Saskatchewan (+$20.2 million). Single-family home investment decreased by $167.4 million to $6.6 billion in May. Ontario (-$80.4 million) accounted for nearly half of the decrease, followed by six other provinces and three territories. Non-residential investment declines slightly The value of non-residential investment in building construction edged down by $28.8 million to $6.8 billion in May. Declines in the industrial (-1.3%) and commercial (-0.5%) components were mitigated by a gain in the institutional component (+0.2%). Investment in the industrial component decreased by $18.0 million to $1.4 billion in May. The fall was largely due to declines in Quebec (-$10.9 million) and Ontario (-$7.1 million). Nova Scotia (+$2.3 million) led the increases recorded in five provinces and one territory. Investment in the commercial component declined by $15.9 million to $3.3 billion in May. Decreases were recorded in eight provinces and two territories, led by Ontario (-$8.8 million). Meanwhile, investment in the institutional component edged up by $5.1 million to $2.1 billion in May. Gains in Alberta (+$8.5 million) and six other provinces were partially offset by a decline in Quebec (-$13.9 million). For more information on construction, please visit the Construction statistics portal. For more information on housing, please visit the Housing statistics portal.
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Advertiser Directory
623-512-6770
888-485-8623
ben@4wardconsult.com www.4wardconsult.com 4Ward Solutions Group
info@buymetrics.com www.buymetrics.com BuyMetrics®
412-262-3225
sales@acerinc.com www.acerinc.com Acer Inc.
800-289-5627
general@clark-ind.com www.clark-ind.com Clark Industries, Inc.
twm@hiring-zone.com www.hiring-zone.com Hiring-Zone
800-521-3245
813-754-1665
connect@eaglemetal.com www.eaglemetal.com Eagle Metal
507-864-2220
● ● ●
719-528-5445
rfitzgerald@fitzgroup.com www.fitzgroup.com Fitzgerald Group, LLC
800-743-9727
cvillella@acceptlease.com www.acceptlease.com Acceptance Leasing & Financing Service, Inc.
info@holtecusa.com
www.holtecusa.com HOLTEC USA Corporation
612-521-9193
PlanSwift Lumber and Building Material Takeoffs Truss and Wall Panel Design Experienced Staff EWP Layouts and much more!
941-713-4395
August 2025 #17313 Page #171
tom@eidemachinery.com www.eidemachinery.com Dave.AllPoints@gmail.com Your Solution for Lack of Technical Staff Eide Machinery Sales, Inc. www.AllPoints.Tech All Points Technical All Points was launched by Industry Veteran Dave Walstad with over 20 years of Offshore Experience to create the Gold Standard in Technical Support Teams.
435-654-3028 steve@hundeggerusa.com www.hundeggerusa.com Hundegger USA
Dave.AllPoints@gmail.com
1-941-713-4395
www.AllPoints.Tech
Offices in: Panama City Beach, FL USA HCMC (Saigon), Vietnam Bengaluru, India
AN ITW COMPANY
800-521-9790 mschwitter@alpineitw.com www.alpineitw.com Alpine
PHONE: 800-289-5627
Eliminate your lack of technical resources to grow sales and increase the clock speed of your company. We have the network and experience you can count on. Deploy Technical Teams from All Points!
800-799-4711 info@element-equipment.ca www.element-equipment.ca Element Equipment by GOW Group Inc.
Read/Subscribe online at www.componentadvertiser.com
980-404-0209 www.woodretriever.com richard@rafterswalls.com JAX, The Wood Retriever FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Advertiser Directory 866-726-7587
416-888-4457 edmond.lim@limteksolutions.com limteksolutions.com LimTek Solutions
800-325-8075 customerservice@mii.com www.mitek-us.com MiTek USA
sales@panplus.com www.panplus.com Panels Plus
August 2025 #17313 Page #172
800-237-5161 sales@precisionequipmfg.com www.precisionequipmfg.com Precision Equipment Truss Trailer Manufacturing
423-225-2331 salessupport@paragontruss.com www.paragontruss.com Paragon
707-333-4507
sales@ROGworx.com www.ROGworx.com ROGworx Automation
Read Now
Presents
Truss Tales Stories and posts on the truss and components industry Let us know if you would like to contribute to this online forum PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Advertiser Directory
800-999-5099
770-922-8000
web@strongtie.com www.strongtie.com Simpson Strong-Tie
www.tpinspection.com Timber Products Inspection
866-647-7771
603-748-1051
sales@spida.com www.spida.com Spida Machinery USA
todd@todd-drummond.com www.todd-drummond.com Todd Drummond Consulting, LLC.
616-698-7500
800-568-7423 ext 133
info@stilesmachinery.com www.stilesmachinery.com/osc The Hain Company Stiles Machinery
LowellT@merrickmachine.com www.triadmachines.com Triad | Merrick Machine
530-295-8068
863-602-2019
Welcome
info@trussbuilderparts.com sales@thehaincompany.com Welcome to The Hain www.thehaincompany.com Company's website!www.trussbuilderparts.com Here you will find informationTruss Builder Parts The Hain Company Home Hain Engineering Services Company Overview Products Companies We Represent
800-289-5627
Hain Racing Products
mail@thejobline.com Request Form www.thejobline.com Contact Us TheJobLine.com Mailing List
about the Hain Company and its line of innovative products that can help streamline your company. Our products are diversely used throughout the manufacturing industry to speed production and reduce labor costs.
News
800-382-0329 sales@wasserman-associates.com www.wasserman-associates.com Wasserman & Associates
916-276-7226 gregory.bates@westfraser.com www.strengthinlumber.com West Fraser
info@wolfxmachina.com www.wolfxmachina.com Wolf X Machina
765-751-9990
Products
info@woodtechsystems.com All Measuring Systems Hain Systems Framer www.woodtechsystems.com Sub Component Nailer Wood Tech Systems, Inc. Quick Rafter Cutter Vent Block Drills
Hain Racing Offset Drive Aluminum Valve Cover
Used Products
907-230-8276
info@vektausa.com www.vektausa.com Vekta USA
Refurbished QRC
Services
You Too Can Join Our Refurbished MEA List of Industry Suppliers Refurbished SCN Contact Anna Stamm Refurbished VBD
Refurbished MMEA anna@componentadvertiser.com
Monet Desauw
Used Products
PHONE: 800-289-5627 Leasing & Financing
August 2025 #17313 Page #173
Read/Subscribe online at www.componentadvertiser.com
Component Saws Floor Web Saw Material Handling
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Hiring-Zone
August 2025 #17313 Page #174
job opportunities available
For Information on Any of these Job Opportunities Truss Designer J15339 Posted on July 1, 2025 Visit: Hiring Zone Truss Designer J15312 Employer: Confidential Nestled in the serene landscapes of Central Florida, away from the hustle and bustle of the city, their location offers a picturesque setting with abundant lakes, perfect for boating, fishing, and outdoor enthusiasts. (Iused to live there and know it is truer) If you appreciate the balance between work and the great outdoors, you've found the right place. Our client, located in Florida, is seeking two Truss Designers. Remote is acceptable if you live in Florida, Alabama, or Georgia as they are able to offer benefits if you live in one of these three states. Remote Multifamily Truss Designer J15356 Employer: Confidential We have a client in Texas who needs Remote Multifamily Truss Designer(s) familiar with the Houston, San Antonio, Austin, and DFW areas. In addition to Texas, they sell to multiple other states. They have multiple plants and are bringing on another plant this year. If you inquire about this job, know that we will represent you to the best of our ability. With over 30 years of experience, The JobLine is your source for career moves that offer advancement and better-than-average compensation.
layout, optimization, cutting/ production documents, and takeoff. Work Schedule: Monday/Friday, limited Saturdays, average 40-45 hours a week, and work from home - full time if qualified. Your hours can be semi-flixible. Components include: floor trusses and roof trusses. Markets include Single Family, Custom, and Multifamily. Educational requirements: GED and High School graduate. Compensation Relocation is acceptable with limited assistance and open to negotiation. Remote if you are qualified. Truss Designer J15312 Florida
Employer: Confidential We seek Truss Designers year around to join our client's team and support their New England office. In this role, you will design various truss products, focusing on floor and roof trusses for singlefamily custom projects. Experience with Simpson software is highly desirable, and panel experience, while not required, is a valuable asset.
Building Components Manufacturing Industry
Job Board Employer to Candidate
Direct Hiring! Available Subcontractors
Nestled in the serene landscapes Business Consultant of Central Florida, away from the hustle and bustle of the city, Accomplished Operational their location offers a picturesque Excellence Manager and Business setting with abundant lakes, Consultant with a strong accumen perfect for boating, fishing, and and track record of driving outdoor enthusiasts. (Iused to live revenue growth and profitability... there and know it is truer) If you See Profile appreciate the balance between work and the great outdoors, you've found the right place.
Our client, located in Florida, is seeking two Truss Designers. Remote is acceptable if you live in Florida, Alabama, or Georgia as they are able to offer benefits if you live in one of these three states. If you and a friend are interested in moving to a great outdoor enthusiast's location, work together, even hit the rivers and lakes for some outstanding bass fishing, this is that location. Truss Designer J15307 I lived in this area in the past and Employer: Confidential my production manager and I Truss Designer - Single Family, would work hard all week to get our production finished in time Custom, and Multifamily. Experience required: 5 years to do some bass fishing Friday industry experience, 3 years afternoon. It was awesome! experience in this position, and will consider a move up if qualified. Primary duties include design,
No Recruiting Fees! Post Your Opportunity Candidates Respond
Directly to You! For Additional Information twm@Hiring-Zone.com or Call: 800-289-5627 x1 Visit our website: www.Hiring-Zone.com
The Hiring Zone is operated by TheJobLine.com, Inc. All applications are sent exclusively to the job poster and not to TheJobLine.com. PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
SCALE YOUR BUSINESS Get the industry-leading software and automation technology you need to scale your business. Overcome market challenges, boost productivity, and confidently meet demand when you choose MiTek as your solution partner.
Are you ready to scale your success? MII.COM/CM
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #176
TheLast Word Finding Your Place in a Great Industry Joe Kannapell, P.E.
T
ouring two plants in July, I couldn’t help wondering which would be a better place to work in the current slowdown. Both are privately owned businesses that are being managed by second-generation owners. Plant “A” is in a stable, rust belt market, and plant “B” is part of a longstanding organization that has expanded to a rapidly growing, southeastern market. Comparing the two sheds light on the key characteristics of a sustainable business. Companies that exemplify these factors are the best places to work, even though all component companies are impacted by the overall health of the housing market. Slowdowns are hard to predict, but they are more difficult when they follow a euphoric period, like the recent Covid-induced mini-boom. That was a rare period when our industry prospered while others suffered. Now it seems that we’re doomed to repeat the feast-and-famine, ratcheting economy that has plagued the component industry. The fact that most of us have been through several of these down cycles offers little consolation. But, most of us also made it out the other side, and many of us even got to a better place, though not necessarily by choice. This component business was, is, and will be a good place to stake our future. Recall its euphoric birth described in last month’s Home Building Technology, Part VII: Carol Sanford’s Quantum Leap, when a piece of metal costing seven cents could be sold for a dollar. And realize that, over the subsequent few years, trusses were so much better than their alternatives that a worldwide industry was created in less than a decade. Certainly, housing starts have been volatile since then, but they have been less volatile since 1990. The sharpest declines have occurred after the greatest excesses, and today we are not generally close to being in an overheated market. We are producing less units, about 1.2 million annually, than the 50-year average of 1.4 million units, with a population more than double what it was at the start of this industry.
According to our builder customers, the future looks bright. At the June SBCA Open Quarterly Meeting, NAHB presented the results of a heartening survey of 1000 builders. Although expected sales increases varied across types of builders and regions of the country, 12% plan to purchase more wall panels and 20% plan to purchase more roof trusses over the next five years. What was striking is that national builders plan to purchase 29% more wall panels, despite the significant skepticism of many CMs. Continued next page
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
A
Th e
Component Manufacturing dverti$ dverti $ er
Don’t Forget! You Saw it in the
Adverti$$er
August 2025 #17313 Page #177
More important than this data is the resilience of a company and how it makes the tough decisions that have to be made. As I learned in the military, the worst decision is the decision not made. And the more tough decisions a company has survived in the past, the better chance it has of surviving in the future. Now, to assess the resilience of the Company A Company B two organizations I visited, the measures Type of Market Hot Steady outlined by Jim Collins in his book, “GoodLong History +++ +++ to-Great,” are most instructive. From the Known Niche ++ ++ many plusses shown in the categories in Driven Leader +++ + the chart, it is obvious that both companies Humble Leader — ++ have strong attributes, which is what Discipline + ++ it takes to succeed through the ups and Technology ++ + downs in this industry. However, their main differences are shaped by the markets Patience + +++ where they operate. To succeed in a steady market takes a steady and usually humble leader. But to succeed in a hot market generally takes a much more driven leader, who is willing to work “outside of the box,” and who leverages the latest equipment and software technology to beat the competition, which is always greater in hot markets. As both companies would be great to work for, the decision comes down to an individual’s tolerance for risk. Moving to a new plant like A in a hot market, as I have done, is riskier, but offers greater rewards. However, the overall cost of living is a large consideration in a relocation. For example, houses in the small college town where I moved cost significantly more than houses in the much larger city of St. Louis, where I began working. What if you were asked by either of these two fine companies to move into a different functional area and/or city? I say welcome the opportunity to take on new or unfamiliar responsibilities, as I had to do when I was moved, not by choice, from engineering to marketing. This helped me years later when I had to move from truss plant manager to salesman, and I’ve known others in this industry who have converted unplanned changes into successful careers. Of course, you should know everything you can about your company, especially its profitability and how it is faring against its competition. That means reaching out and meeting personally as many people as possible. LinkedIn can open doors, but it is your job to go through those doors and see what’s on the other side. That provides perspective. Fortunately, the component industry is part of the largest and most essential industry in America, and the use of the products we make will continue to grow. There are hundreds of great entrepreneurial component companies across American that have found their niche. Now it is up to each individual to find theirs.
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
When you work with us, you get:
Speed and Scalability Adjustable Hours No Need for Training Reduced Regulatory Burdens Reliable Timelines and best of all...
Great Designs! EXTEND YOUR EXISTING CAPABILITIES WITH 4WARD’S DESIGN EXPERTISE Without the hassle and expense of training your own designers, partnering with us guarantees that each wall panel, floor truss or roof truss will be designed for structural integrity and production and field efficiency.
CONTACT US
4Wardsolutionsgroup.com Design@4WardConsult.com