Component Manufacturing Advertiser

Page 3

M ACdverti$er omponent

anufacturing

Don’t Forget!

Adverti$er ASLC Board of Review

You Saw it in the

Published Weekly

CLARIFICATION OF BOARD OF REVIEW RULING

Editor/Publisher

From: Thomas D. Searles

Thomas McAnally tmcanally@componentadvertiser.com

January 12, 2012

AMERICAN LUMBER STANDARD COMMITTEE BOARD OF REVIEW

Advertising

Thomas McAnally Position Available

In the Matter of the Submission of the Southern Pine Inspection Bureau for Approval of Supplement 9. SUPPLEMENTAL RULING

Subscriptions

Renae McAnally

This is to clarify the January 11, 2011 ruling of the Board regarding the proposed design values for southern pine species. The ruling should have made clear that the approval was for No. 2 2x4 lumber and all lower grades of this size ( i.e. No. 3, Stud, Construction, Standard and Utility ). The recommended effective date for all of these grades is June 1, 2012. This approach is consistent with ASTM D-1990 and is mandated by the practical applications of these grades in the construction industry.

Distributed FREE

via e-mail subscription

Download FREE and

subscribe by e-mail at www.componentadvertiser.com

As the Board pointed out in its initial ruling, Section7.2 of D-1990 addresses limitations on the use of data from one grade for extrapolations to other grades. Given the full context of D-1990 and its practical implications, however, the Board has concluded that the principle of Section 7.4 does not apply to extrapolations from No. 2 2x4’s to lower grades in this size. For instance, Section X8.2.1 of D-1990 provides: “Property estimates for all grades below No.2 are estimated as the model predicted value at the grade minimum strength ratio (as listed in the grading rules).” Thus, the design values for grades lower than No. 2 are controlled by the No 2 2x4 cell and would not likely to be effected by the ongoing matrix testing of higher grades.

News of interest can be submitted to: info@componentadvertiser.com We offer one forum for many sources Industry Articles are the property of their creator unless otherwise noted Disclaimer: We reserve the right to refuse any advertisement or material that we deem not in the interest of the industry or the Advertiser. The Advertiser is provided “As Is” including typographical errors, omissions, and mistakes both intentional and unintentional. Believe it at your own risk

This interpretation is also mandated by the discontinuities of grade properties that would otherwise occur if the lower grades were maintained while No. 2 values were substantially reduced. This would lead to the anomalous result that Construction grade 2x4 would have higher values than No 2 2x4, for example. Because of different knot size allowances and other grading factors, Construction grade is, by definition, weaker than No. 2 2x4. The Board regrets any confusion that this may have caused.

Advertiser “Stuff” Thomas McAnally - Publisher

Copyright 2008-2009-2010 -2011-2012

Happenings at the Advertiser.

Component Advertiser

PO Box 16685 Fernandina Beach, FL. 32035 no reproduction in whole

eMagazine Reading options

800-289-5627

New phone number:

FAX: 800-524-4982

Mailing address: PO Box 16685 Fernandina Beach, Florida 32035

Our websitewas moved. Please be sure to update your bookmark www.componentadvertiser.com

or in part without permission from the component advertiser

January 20th, 2012 #05127 Page #3

Advertising Free Trial: First quarter of 2012, free advertising trial for suppliers of materials, supplies or equipment You have two options with our new to industry manufacturers (at our discretion). Suppliers of Services free ad program will be later eMagazine, 1 or 2 page display. For smaller screens, tablets and phones, we will now offer this year. Please check with me for details. a 1 page link in our weekly notice. If you open 2012 Showcase: Submit pictures of your best truss or panel project, or manufacturing this in two page, you can easily change to one operation to be considered for our 2012 Showcase. Each week, we will showcase the best submittal page by clicking on the control Icon above. on our cover, with a story behind the photo inside. In a market where price is usually the winner, this is a chance to show your company pride. Photo’s should be high resolution, portrait format, any standard image file extension, submit to tmcanally@componentadvertiser.com. Your comments are welcome: email info@componentadvertiser.com

Member PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.
Component Manufacturing Advertiser by Component Manufacturing Advertiser - Issuu