Component Manufacturing Advertiser

A #

127

PUBLISHED WEEKLY January 20th 2012 #05127

Component Manufacturing dverti$er

Serving the Structural Building Components, Engineered Wood Products and Millwork Industry

Inside:

ALSC:

Board of Review: CLARIFICATION OF BOARD OF REVIEW RULING page 3

HILCO Auction: Page 4

SPIB:

Suppliment #9 Page 5

Madison’s Lumber Reporter Page 12

New Equipment Spotlight: Page 25

JobLine Hiring Zone: Page 27

Safety First Topics in English/Spanish: Page 31

Business Directory: Page 32

M ACdverti$er omponent

anufacturing

Don’t Forget!

You Saw it in the

Adverti$er

January 20th, 2012 #05127 Page #2

www.mii.com/MiTekAssurance

8 PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget!

Adverti$er ASLC Board of Review

You Saw it in the

Published Weekly

CLARIFICATION OF BOARD OF REVIEW RULING

Editor/Publisher

From: Thomas D. Searles

Thomas McAnally tmcanally@componentadvertiser.com

January 12, 2012

AMERICAN LUMBER STANDARD COMMITTEE BOARD OF REVIEW

Advertising

Thomas McAnally Position Available

In the Matter of the Submission of the Southern Pine Inspection Bureau for Approval of Supplement 9.

SUPPLEMENTAL RULING

Subscriptions

Renae McAnally

This is to clarify the January 11, 2011 ruling of the Board regarding the proposed design values for southern pine species. The ruling should have made clear that the approval was for No. 2 2x4 lumber and all lower grades of this size ( i.e. No. 3, Stud, Construction, Standard and Utility ). The recommended effective date for all of these grades is June 1, 2012. This approach is consistent with ASTM D-1990 and is mandated by the practical applications of these grades in the construction industry.

Distributed FREE

via e-mail subscription

Download FREE and

subscribe by e-mail at www.componentadvertiser.com

As the Board pointed out in its initial ruling, Section7.2 of D-1990 addresses limitations on the use of data from one grade for extrapolations to other grades. Given the full context of D-1990 and its practical implications, however, the Board has concluded that the principle of Section 7.4 does not apply to extrapolations from No. 2 2x4’s to lower grades in this size. For instance, Section X8.2.1 of D-1990 provides: “Property estimates for all grades below No.2 are estimated as the model predicted value at the grade minimum strength ratio (as listed in the grading rules).”

Thus, the design values for grades lower than No. 2 are controlled by the No 2 2x4 cell and would not likely to be effected by the ongoing matrix testing of higher grades.

News of interest can be submitted to: info@componentadvertiser.com We offer one forum for many sources Industry Articles are the property of their creator unless otherwise noted Disclaimer: We reserve the right to refuse any advertisement or material that we deem not in the interest of the industry or the Advertiser. The Advertiser is provided “As Is” including typographical errors, omissions, and mistakes both intentional and unintentional. Believe it at your own risk

This interpretation is also mandated by the discontinuities of grade properties that would otherwise occur if the lower grades were maintained while No. 2 values were substantially reduced.

This would lead to the anomalous result that Construction grade 2x4 would have higher values than No 2 2x4, for example. Because of different knot size allowances and other grading factors, Construction grade is, by definition, weaker than No. 2 2x4.

The Board regrets any confusion that this may have caused.

Advertiser “Stuff” Thomas McAnally - Publisher

Copyright 2008-2009-2010 -2011-2012

Happenings at the Advertiser.

Component Advertiser

PO Box 16685 Fernandina Beach, FL. 32035 no reproduction in whole

eMagazine Reading options

800-289-5627

•

New phone number:

•

FAX: 800-524-4982

•

Mailing address:

PO Box 16685

Fernandina Beach, Florida 32035

•

Our websitewas moved. Please be sure to update your bookmark

www.componentadvertiser.com

or in part without permission from the component advertiser

January 20th, 2012 #05127 Page #3

Advertising Free Trial: First quarter of 2012, free advertising trial for suppliers of materials, supplies or equipment You have two options with our new to industry manufacturers (at our discretion). Suppliers of Services free ad program will be later eMagazine, 1 or 2 page display. For smaller screens, tablets and phones, we will now offer this year. Please check with me for details. a 1 page link in our weekly notice. If you open 2012 Showcase: Submit pictures of your best truss or panel project, or manufacturing this in two page, you can easily change to one operation to be considered for our 2012 Showcase. Each week, we will showcase the best submittal page by clicking on the control Icon above. on our cover, with a story behind the photo inside. In a market where price is usually the winner, this is a chance to show your company pride. Photo’s should be high resolution, portrait format, any standard image file extension, submit to tmcanally@componentadvertiser.com.

Your comments are welcome: email info@componentadvertiser.com

Member PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er A HILCO ONLINE auCTION tHuRS. FEB. 9tH to WED. FEB. 15tH omponent

anufacturing

Don’t Forget!

You Saw it in the

By order of the owner, assets of

dverti$er

January 20th, 2012 #05127 Page #4

Preview info:

Mon., Tues. & Wed., Feb. 6, 7 & 8, 2012 from 7 AM to 3 PM ET Each Day or Earlier By Appointment.

Preview Locations:

• 5 E. Pointe Drive, Birdsboro, PA • 4775 Prairie Hill Road, South Beloit, IL Please check www.hilcoind.com for closing times

Earlier preview by appointment only.

To schedule an appointment please contact Tim Pfister at 847.313.4747

Leading Building Component & Millwork Manufacturing Company Including Roof Truss, Floor Truss, Wall Panel, Lumber, Millwork Machinery, Material Handling Equipment, Trucks & Trailers

Pick Up Trucks, Material Handling, Air Compressors & Dryer, Shop Equipment, Office Equipment, Portable Sheathing Bridge Millwork & Lumber Inventory

• • • • • • • • • • • • • • • • •

Roof Truss Gantry Equipment Truss Machines Wall Panel Lines Truss & Panel Support Equipment Laser Projection System Web Saws Component Saw Marking Saw Saws Millwork Machinery Tractor Mounted Knuckle Booms Tractors Flatbed Dump Truck Flatbed Truck Demountable Box Trucks Box Truck Trailers

Partial listings only. For Complete Terms, Lot Catalog, Buyers Premium, or to Subscribe to Our Email/Mailing Lists, Visit

www.hilcoind.com

Pennsylvania Auctioneer & License: Tommy Ingram, License #AU003942 • PA License #AY002121 PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget!

You Saw it in the

SAWS R P ed r u ice ct io n

January 20th, 2012 #05127 Page #5

Adverti$er

Supplement No. 9 to the Southern Pine Inspection Bureau 2002 Grading Rules Effective June 1. 2012 This supplement makes no changes in the provisions of the 2002 SPIB Standard Grading Rules except the changes to the design values as listed in Tables 1.A, 3, 6, and 7.

TABLE 1.A - STRUCTURAL LIGHT FRAMING - 2" To 4" Thick

2004 Monet DeSauw "Desawyer 2000" Five Blade Automated Component Saw

Automated, Semi-Automated & Manual Operating Modes. (1) 30" Blade & (4) 16" Blades cut 2x4 thru 2x12 up to 20'. No Incline Waste Conveyor. Add $5,000 for 2000 Monet DeSauw Power Deck. $47,500 NOW $44,500 - FOB IL) Wasserman & Associates 800-382-0329

Re Pri du ce ct io n

Grade

Extreme Fiber in Bending (psi) "Fb"

Tension Parallel To Grain (psi) "Ft"

Horizontal Shear (psi) "Fv"

Compression Perpendicular To Grain (psi) "Fc⊥"

Compression Parallel To Grain (psi) "Fc//"

Modulus of Elasticity (million psi) "E"

Kiln Dried or S-Dry, MC 15, MC 19 APPLIeS To 2” - 4” THICK – 2” - 4” WIDe onLY No. 2 Dense

1150

750

175

660

1250

1.5

No. 2

1050

650

175

565

1100

1.4

No. 2 N

975

575

175

480

1050

1.2

No. 3 & Stud

600

375

175

565

625

1.2

Compression Perpendicular To Grain (psi) " Fc⊥"

Compression Parallel To Grain (psi) "Fc//"

Modulus of Elasticity (million psi) "E"

TABLE 3 - LIGHT FRAMING- 2" To 4" Thick

Grade

Extreme Fiber in Bending (psi) "Fb"

Tension Parallel To Grain (psi) "Ft"

Horizontal Shear (psi) "Fv"

Kiln Dried or S-Dry, MC 15, MC 19 APPLIeS To 2” - 4” THICK – 2” - 4” WIDe onLY

2002 Alpine AutoMill RS 5 Blade Automated Component Saw including Live Deck

Automated via Download or SemiAutomated via Touch Screen Input 19 Axes of Automation. Cut 2x3 thru 2x12 from 13” to 20’. Label Printer. 5 Chain Live Deck. Extra Set of Blades. Waste & Incline Conveyor. Self Dumping Hopper. $40,000 NOW $35,000 FOB WA. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Construction

800

500

175

565

1150

1.3

Standard

450

275

175

565

950

1.2

Utility

200

125

175

565

625

1.1

TABLE 6 - MIXED SOUTHERN PINE (Virginia Pine and Pond Pine) - 2" To 4" Thick STRUCTURAL LIGHT FRAMING

Grade

Extreme Fiber in Bending (psi) "Fb"

Tension Parallel To Grain (psi) "Ft"

Horizontal Shear (psi) "Fv"

Compression Perpendicular To Grain (psi) "Fc⊥"

Compression Parallel To Grain (psi) "Fc//"

Modulus of Elasticity (million psi) "E"

Kiln Dried or S-Dry, MC 15, MC 19 APPLIeS To 2” - 4” THICK – 2” - 4” WIDe onLY No. 2

1050

650

175

565

1100

1.4

No. 3 & Stud

600

375

175

565

625

1.2

" Fc⊥"

Compression Parallel To Grain (psi) "Fc//"

Modulus of Elasticity (million psi) "E"

TABLE 7 - MIXED SOUTHERN PINE (Virginia Pine and Pond Pine) LIGHT FRAMING- 2" To 4" Thick

2005 Koskovich Auto Omni Component Saw Price: $34,900 :: FOB OH Condition: Good 4-blade Koskovich Auto Omni saw, (1) 30" and (3) 19" blades. Includes shaker-pan waste conveyor, factory side pans, factory console with PC, Exair cabinet coolers and set of spare blades. 440 volt, 3 phase electrical.

Wood Truss Systems 888.288.9874

PHONE: 800-289-5627

Grade

Extreme Fiber in Bending (psi) "Fb"

Tension Parallel To Grain (psi) "Ft"

Horizontal Shear (psi) "Fv"

Compression Perpendicular To Grain (psi)

Kiln Dried or S-Dry, MC 15, MC 19 APPLIeS To 2” - 4” THICK – 2” - 4” WIDe onLY Construction

800

500

175

565

1150

1.3

Standard

450

275

175

565

950

1.2

Utility

200

125

175

565

625

1.1

Approved by the Board of Governors of the Southern Pine Inspection Bureau.

Approved by the Board of Review of the American Lumber Standard Committee.

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget!

You Saw it in the

Adverti$er

January 20th, 2012 #05127 Page #6

R P ed r u ice ct io n

SAWS

2002 Alpine AutoMill RS Component Saw

8

Model 344, five-blade saw with (1) 20” blade, (3) 18” blades and (1) 32” blade.

Cuts lumber lengths from 13” 90/90 to 20 feet and sizes 2x3 to 2x12” depths. Touch screen controls, digital displays, powered angulation and length. Includes scrap conveyor and incline. 480 volt, 3 phase, 53 Amps. $32,900 NOW $26,900 NOW $16,900 FOB TX Wood Truss Systems 888.288.9874 www.woodtrusssystems.com

1998 MiTek Cyber Saw

SAWS

SAWS

R P ed r u ice ct io n

SAWS

PHONE: 800-289-5627

en d

Hain Company model QRC, double-bevel cut machine, cuts 2x4 and 2x6, includes (2) 2 HP motors, (2) 7 1/4” blades set at 45 degree angles to one another, steel frame with aluminum housing, manual angulation with air brakes. 90 PSI, 440 volt, 3 phase electrical. $2,900 FOB CA Wood Truss Systems 888.288.9874 www.woodtrusssystems.com

2005 Virtek LaserMC Wall Panel Cutting & Marking System

-Automated Wall Panel Component Cutting & Laser Layout Marking as directed by Wall Panel Software Output. Vista Angle Boss Cut-Off Saw. 20’ Capacity. Environmental Computer Enclosure with Computer/ Monitor. $39,000 NOW $32,500 NOW $29,900 FOB IL. Wasserman & Associates 800-382-0329

P

2002 Hain Quick Rafter Cutter

in

g

R P ed r u ice ct io n

Frame #072, Fully automated five-blade component saw. Cutting performed by 2-16” X 6HP, 2-20” X 6HP, 1-32” X 12.5HP. WITH Dell PC upgrade featuring touch screen controls for fully automated or manual part input, all powered movements, cuts 2x4 thru 2x12 and 4x2. Lengths cut from 11 inches to 20 feet. Includes scrap conveyor with incline, out-feed skate-wheel conveyor, 6-flight Mitek live, in-feed deck, a complete, well maintained, OEM serviced automated saw. 220V/60Hz/3ph. $17,900 FOB SC. Wood Truss Systems 888.288.9874

2004 Mitek Cyber A/T 5 Blade 2003 Delta 16" Radial Arm Saw Delta 33-411 16" Radial Arm Saw. Automated Component Saw Waste & Incline Conveyor. NOW Maximum crosscut of 29" and maximum right or left 45 degree miter cut of 22". $49,900 Includes $5,000 Parts Features "Turret Arm" construction which Allowance. FOB AZ. allows the sawblade to rotate 360° above the work table, a 5HP motor and 460V, 3ph Wasserman & Associates power. $1,800 :: FOB OH 800-382-0329 Wood Truss Systems www.wasserman-associates.com 888.288.9874

Read/Subscribe online at www.componentadvertiser.com

www.woodtrusssystems.com

FAX: 800-524-4982

omponent

anufacturing

Don’t Forget!

You Saw it in the

Adverti$er

On the Cutting Edge...

The Measuring System (MEA) is the fastest, most consistent way to measure and cut your product! Read more about where this machine can be used, and how it can be added to your existing sawing equipment.

The Folding Measuring System (FMEA) provides the same fast accurate measuring and cutting as the original MEA but in a smaller, portable version.

SAWS R P ed r u ice ct io n

M ACdverti$er

January 20th, 2012 #05127 Page #7

ASI WA 500 Floor Web Saw

Four blade saw that includes shaker pan and waste incline. This saw cuts from 8 to 115 degree angles. The minimum 90/90 cut is 9 inches and the shortest angle cut is 15 inches. The saw cuts 2x4 lumber up to 10 feet in length. Angles are set using digital readouts. Both the length and angle adjustments are power driven. $10,900 NOW $9,900 FOB TX Wood Truss Systems 888.288.9874 www.woodtrusssystems.com

The Table Measuring System (TMEA) provides the same fast accurate measuring and cutting as the original MEA but in a smaller version.

Idaco Componamatic 4 Blade Component Saw

The Portable Measuring System (PMEA) provides the same fast accurate measuring and cutting as the original MEA but in a smaller, portable version.

-Reconditioned in 2003 -Cuts 2x4 thru 2x12 from 12" to 24' -Powered Angulation & Carriage - B e l t Wa s t e & I n c l i n e C o n v e y o r -230 Volt / 3 Phase . $5,900 FOB ID. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

The Manual Measuring System (MMEA) adjusts quickly with a turn of a handle without changing the operator's position on the line.

The Vent Block Drill (VBD) is designed to make lumber, truss and wall panel manufacturing yards more efficient by easily converting scrap wood into useable vent (frieze) blocks in seconds.

Phone: 530.295.8068

Fax: 530.295.0468

Email: leonard@thehaincompany.com - www.thehaincompany.com P.O. Box 238 - Rescue, CA 95672 PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

1992 MiTek Easy Set 1000 Saw

5-blade component saw 2x 16”, 2x 20”, 1x 32” blades, with swing-arm central control system, digital/analog display, power holddown, carriage, waste conveyor, dust-hoods, cuts from 11”@ 90/90, 45º four angle webs from 16”, 2x3 through 2x12 up to 20’, 230v, 3ph power. $9,950 FOB OH. Wood Truss Systems 888.288.9874 www.woodtrusssystems.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget!

You Saw it in the

2006 Virtek Laser MC

Automated plate cutting/laser burning layout system is complete with Virtek Laser MC Class IV laser w/computer workstation, Vista Angle Boss undertable cut-off saw and infeed table with lumber advance pusher bar cuts material from 2"-10" thick up to 16' in length. System precision cuts and laser marks wall panel parts with extreme accuracy, infeed speed of 30" per sec., optimizes lumber usage, minimizes scrap, improves quality and reduces labor, 20" blade, power in-feed deck, 480V, 3ph power. Safety guard, pusher system and motor included. MS Windows 95 operating system provides easy user interface, reduces operator error and speeds production.

Requires 480V, 3ph power for saw, two 110 volt, single phase circuits required for the PC and the laser. 80 PSI air. $49,000 FOB OH Wood Truss Systems 888.288.9874

SO

•

Adverti$er

SAWS

LD

SAWS

2006 Alpine AutoMill SC 5 Blade Automated Saw

January 20th, 2012 #05127 Page #8

Automated(File Download) or SemiAutomated(Touch Screen) Servo Controlled Operation • 23 Axes of Automation • Set Up Times less than 20 Seconds • Auto Sequencing • Auto Management Reporting • Auto Saw Calibration (80 Seconds) without Lumber Cutting & Measuring • Enhanced Diagnostics & Safety Features • 5 Blades(3-18", 1-20" & 1-32") with Air Brakes cut from 13" to 20' $55,000 FOB Alberta Wasserman & Associates 800-382-0329 www.wasserman-associates.com

NEW! 8 1999 Alpine AutoMill Component Saw

Koskovich

Model 343-G, five-blade saw with (1) 20” blade, (3) 18” blades and Auto Omni (1) 32” blade. Cuts lumber lengths Component Saw from 13” 90/90 to 20 feet and sizes $19,900 FOB TX 2x3 to 2x12” depths. Touch screen oodTrussruss Wood inc. controls, digital display, powered Systems ystems angulation and length. Includes MANUFACTURERS’ REPRESENTATIVES conveyor and 480 volt, Combining the qualities and expertisescrap you should expect from an incline. industry supplier Toll Free: 3 phase, 56 Amps NEW 1999, five-blade Auto-Omni never unpacked from OEM shipment.

W

S

T

Toll Free: 888.288.9874

inc.

MANUFACTURERS’ REPRESENTATIVES

888.288.9874

This outstanding new computerized saw is configured with [1] 30 inch blade, [3] 20 inch blades and [1] 12 inch blade. Includes optional Matthews Ink-Jet Printer, spare set of blades, shaker-pan waste conveyor with OEM shaker side pans, includes fully complete spare parts kits, OEM system

PC with enclosure. This new saw is available for inspection, and is ready for many years of good service. Expert installation and support available from MiTek and other independent reps. 90 amp 208/230/460v, 3 phase, and 90 amp 120vac electrical service re-

$97,500 FOB WA NOW $69,900

quired.

Wood Truss Systems

inc.

2000 Alpine Speed Cut Mobile Little Framer

MANUFACTURERS’ REPRESENTATIVES

Combining the qualities and expertise you should expect from an industry supplier

(Trailer Mounted Radial Arm Saw)

16” Blade, 24” Cross Cut x 6” Depth, 10 Degree to 170 Degree Angular Capacity, -5 HP / 220 Volt / 1 Phase. $4,500 FOB WA Wasserman & Associates 800-382-0329

GET RESULTS ! with the

Advertiser

2003 Alpine ALS Linear Saw 275c

Was $39,900 NOW $29,900 FOB TX

2006 TCT EZ Trimmer

cuts model CT041-2000 double bevels on pitches from 0/12 to 12/12 including 2 x 3, 2 x 4 and 2 x 6 lumber. Totally enclosed, this unit has an average cycle time of 15 pieces per minute and can be used as a stand alone unit or attached to and powered from another TCT saw. Includes a 5 HP, 3 phase, variable frequency drive and Bosch-Rexroth/SMC pneumatics. Air requirements are 80 psi at 9 cfm. Electrical requirements are 440 volt, 3 phase. $5,900 FOB OH. Wood Truss Systems 888.288.9874

8 PHONE: 800-289-5627

Toll Free: 888.288.9874

Linear fed saw Model #275C, cuts all truss parts from any lumber width, cuts bevels from 90 to 25 degrees, 60"+ scarf cuts, optimizes material, production rates +2000 pcs. / 8 hr. shift. Includes 20 ft OEM infeed conveyor and 15 ft OEM outfeed conveyor, Ink jet printer, and belt scrap conveyor. All servo controlled functions, 7.5 hp motor with (1) 20" carbide tipped blade. 240v 3ph

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

January 20th, 2012 #05127 Page #9

Don’t Forget!

You Saw it in the

Adverti$er

SAWS

800-382-0329

www.wasserman-associates.com

2006 Hundegger SC-1 Lineal Saw with Milling Capacity $129,000 FOB Alberta

-32' Loading Conveyor -Automated Infeed Wheel -Automated Positioning & Clamping -360 Degree Servo Drive Saw for Angle & Bevel/Compound Cuttting -Vertical End Mill Router -Special Stacked Bevel Cutter Mill Head -Outfeed Table with Rear Stacked Ink Jet System (16 Nozzles) -6 Arm Storage Deck -Stack Assistant -Y-Axis Cross Section Measuring Device -Electronic Controls & Operator Console with 2 Computers -A/C System for Electronic Control Cabinet -Remote Diagnostic System -Disposal Conveyor under Saw -Small Parts Ejector & Conveyor -480 Volt / 3 Phase

2002 Koskovich Auto Omni Component Saw

Five-blade computerized saw that has been well maintained and is configured with [1] 30 inch blade, [3] 20 inch blades and [1] 12 inch blade. O.E.M. conveyor with shaker side pans, rear extensions and a set of spare blades. 230V/120V, 3/1 phase electrical service. Infeed deck shown in pictures can be purchased separately for an additional $5,900. FOB CA $39,900.

Wood Truss Systems 888.288.9874

8 TRUSS EQUIPMENT

TRUSS EQUIPMENT

TRUSS EQUIPMENT

Klaisler 6-40 Traveling Floor Machine

2002 MiTek Tee-Tracker Gantry System

Omega Round Web Saw

Web saw for cutting "Turb-O-Webs™" features (10) 5 HP saw blades 2@14" 8@12" with air brakes, cuts 2"x3" or 2"X4" webs from 17" to 14' at speeds up to 1,000 webs per hour. Includes scrap conveyor. 460V 3ph. $5,900 :: FOB TN Wood Truss Systems 888.288.9874

Tee-Lok Side-Eject 24" dia Gantry

2000 Monet DeSauw B500XE 5 Blade Semi-Automatic Component Saw

-Touch Pad/PLC Driven with Mechanical Backup -(1) 30" Blade & (4) 16" Blades cut from 10" Square to 20' -Vibrating Waste Conveyor -Belt Incline Conveyor -480 Volt / 3 Phase $22,900 FOB KS Wasserman & Associates 800-382-0329 www.wasserman-associates.com

PHONE: 800-289-5627

165' Side-eject system with (22) Tee-Slot 6'x14' slotted steel-top tables, Two (2) TeeLok 14'x24" dia. roller gantries, soft start, direct drive gear motors. System includes air-manifold and available jigging hardware.

System includes Tee-Lok 24"x14' dia final roller, transfer roller to inside and outside power/idle conveyor. 480v, 3 ph. (Can be sold in lesser quantities to create a customlength system). $49,900 FOB NC. Wood Truss Systems 888.288.9874 www.woodtrusssystems.com

Floor truss press includes gantry head with operator platform, all steel table, kick legs, air-cylinder clamping, and quick change 2-4-6-8” step-blocks, with end stops. Builds from 12" to 24" deep trusses, up to 40 foot long, with pre-set camber. Gantry has twohanded push-button forward / reverse & stop controls. Well maintained, currently in service, and under power, with twin-drive, 5-HP, riding on floor-mounted 85# crane rail, 460 volt, 3 phase electrical. $6,900 FOB KY. Wood Truss Systems 888.288.9874 www.woodtrusssystems.com

GET RESULTS !

14' X 72' side-eject, trackless system complete with (10) 6' X 14'slotted, 3/4" steel-top tables w/ejectors to powered transfer rollers, (66 tables available), 10 powered, 18 idle outfeed conveyor (140’ @ 5’ o.c.), MiTek Tee-Tracker Gantry head 14' X 24" dia. (seven available) featuring joy-stick control, Demag Gmb motor and drive components with Auto-Lube. System includes dual park stations, electrical festooned cable, bridge-plates, all available hardware, etc. 460v/230v, 3ph, 60Hz. Two (2) 14’ X 24" diameter MiTek final rollers available at an additional cost to complete a system.

Wood Truss Systems 888.288.9874 www.woodtrusssystems.com

with the

Advertiser Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

TRUSS EQUIPMENT

Don’t Forget!

You Saw it in the

Adverti$er

January 20th, 2012 #05127 Page #10

TRUSS EQUIPMENT

800-382-0329 Design your own custom roof truss gantry!

Don’t see the system that is just right for you? With many our listings, we can split the system up to create the perfect fit for your space or budget limitations. Need a 46’ RoofGlider, with 50’ of conveyor, and no final roller. or an 80’ Klaisler line with a final roller and a stacker; we can do that! Call or e-mail us with your specific request and put us to work building your custom solution.

Wood Truss Systems 888.288.9874

2006 MiTek Infeed Deck

$33,500 FOB SC

2006 MiTek live deck with foot controls, 19’ wide x 21’ long footprint, 3 HP motor, 25 fpm speed and 15,000 lb capacity.

Disassembled and ready to ship. 440 volt, 3 phase electrical. $4,900 FOB ID Wood Truss Systems 888.288.9874

8

2007 Klaisler Floor-Truss AgriStack AGS

Klaisler Agri-Stack AGS-02-0107, Heavyduty, 2 Pedestal stacker system consisting of two 2"x3" steel lift-arms, 2 stationary pedestals spaced 15' apart (15' total area), 2 aluminum upright arms, Sumitomo braking gear motors, two 6'x20' powered, 6 roller sections with 2.25 H,P, Sumitomo shaft1997 Pacific Automation Auto-8 mount gear-motors, stacks up to 40' floor (40’) Truss Press trusses with a 30-40 second cycle time.

-8' x 40' Drilled & Tapped Steel Table Stacking operations controlled by reversing -50 Ton Hydraulic Press starter panel with independent motor -24" x 96" Platen overload protection control panel (push -Floor Truss Jig button controls included). Multi voltage -Press 2x4 and 4x2 with no adjustment. 208/230/460v, 3ph. $12,500 FOB SC. $29,500 FOB ID. NOW $18,900 Wood Truss Systems Wasserman & Associates 888.288.9874 800-382-0329 www.woodtrusssystems.com

1997 Tee-Lok 14' x 120' Side Eject Roller Gantry System

-2 Each - Tee-Lok 14’ Roller Gantries (Track Mounted) -Slotted Top Tables with Pop-up Skatewheel Ejectors -Powered Exiting Conveyor with Receivers -Tee-Lok 14’ Finish Roller -Dismantled & Stored in Early 2011

Optional Equipment -Eliminate 99% of the set-up time & all manual jigging by retrofitting the tables with WizardPDS® drop-in ChannelS™ www.wasserman-associates.com

8 PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget!

You Saw it in the

Adverti$er

January 20th, 2012 #05127 Page #11

TRUSS EQUIPMENT

2 0 0 3 R o b b i n s " S u p e r To r q u e " 14' x 24" Diameter Finish Roller

TRUSS EQUIPMENT

TRUSS EQUIPMENT

R P ed r u ice ct io n

R P ed r u ic ct e io n

-230 Volt / 3 Phase -$9,900 FOB SK Wasserman & Associates 800-382-0329 www.wasserman-associates.com

14’ X 20’’ Clary with Dual Drive

1999 Alpine Mighty Mite Truss Assembly System

Page 7 No Change...

Reconditioned / F.O.B Windsor / Detroit.

FOB Windsor/Detroit MI. SALTER & ASSOCIATES 770.434.1006 www.salter.com

-5’ x 20’ Table (needs new wood top) -(2) 4” Diameter Hydraulic Cylinders at 31,000 Lbs Each -240 Volt / 3 Phase / 5 HP Motor. $7,900 NOW $6,900 FOB OH. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2006 MiTek RoofTracker JSP System

14’ x 136’ trackless side-eject gantry.

Includes (17) 6’-10” x 14’ slotted, 3/4” steel-top Jet-Set Pro ready tables with ejectors (results in lower cost conversion to MiTek Planx, Wizard PDS, or Retrofit to Alpine C4 AutoSet). Includes two (2) model 63750-501 RoofTracker gantry heads each with a 24” dia. X 14’ roll w/joy-stick control, (1) model 68300 24” final roller.

System includes all air-manifold, jigging hardware, bridge-plates, etc. (conveyor seen in photos was previously sold with the opposite side system). 480V, 3 ph power. $149,900 FOB GA. Wood Truss Systems 888.288.9874

2005 MiTek RailRider End Eject Floor Machine

04 Mitek Rail Rider Reduced to $29,900 /FOB TX 7 X42 , 54 O/A. Trackless table design, Pop- up air ejectors, an overhead plate rack, a 9 shelf on each side of the table for plate storage and a riding platform.

24 roll -10HP motor w/electric softstart. Item F1026

End-eject system, 42 foot working length, 54 foot overall length, 24 inch diameter gantry head roll, depth truss capacity from 10 inches to 24 inches. Clamping fence actuated by air cylinders mounted under the table, pop-up end-eject ejector idler rolls, plate storage along table edge, end stop jigging, operator's riding platform and pendant controls. Includes overhead plate rack with end-stands, end eject parking ramp, nine (9) exterior, 4 foot wide, idler conveyors and four (4) floor stacking racks.

Electrical s/o chord, masts and wire cable included. 460 volt, 3 phase electrical. $49,000 FOB OH. Wood Truss Systems 888.288.9874

No change to content - Page 12

Truss Machinery Connections 800-580-6430

2005 Koskovich Jet-Set

-Model 725M -15 HP Motor (208 Volt) -Safety Bars Wasserman & Associates 800-382-0329 www.wasserman-associates.com

23 Auto Jigging rails with 2 independent pucks per rail, special compact 12' assembly jigs to 13', 3 with cosmetic damage to face cover (2 new covers included in spare parts) Can be retrofitted to most table styles, installation available. Price listed per rail. $1,554, FOB IN. Wood Truss Systems 888.288.9874

Robbins

Pacific Automation s We have a wide selection of popular brands!

Alpine Speed Roll Kick Leg Floor Machine

Mitek

Jager Truswal

Clary 6 Ft. Finish Press

Six foot throat finish roller with 20" rolls.

Presses 1 1/2" thickness. Push button controls. Includes (2) 2 foot wide roller conveyors, 10 feet long each. 240 volt, 3 phase. $3,900 NOW $1,500 FOB TX Wood Truss Systems 888.288.9874 www.woodtrusssystems.com

2007 Alpine 15'-6" x 24" Diameter Finish Roller

Need a Finish Roller?

PHONE: 800-289-5627

TRUSS EQUIPMENT

Alpine CMF

Read/Subscribe online at www.componentadvertiser.com

Alpine Speed Roll, floor truss press includes gantry head with 20 inch diameter roll, steel table, kick legs, air-cylinder clamping, operator platform and end stops. Builds from 12" to 24" deep trusses, up to 40 foot long.

Gantry has toggle forward / reverse & stop controls. Includes partial, overhead plate rack, (4) 78" wide idler conveyors & (4) 38" wide idler conveyors. 230 volt, 3 phase electrical. $9,900 FOB TX Wood Truss Systems 888.288.9874 www.woodtrusssystems.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget!

You Saw it in the

Adverti$er

January 20th, 2012 #05127 Page #12

TRUSS EQUIPMENT

Weekly updates on the solid wood market in Canada and the US provided by Keta Kosman, publisher and editor of Madison’s Lumber Reporter. Madison’s is a North American lumber and panel commodity price guide and market analysis newsletter, which has been published every Friday out of Vancouver, BC since 1952. For more information please visit http://www.madisonsreport.com

8 2007 RAND / AIR SET / FLOOR TRUSS GANTRY / MD-10-30-40 2007 RAND AIR SET TRUSS 40' Roll Driven Floor/ Truss Machine / Builds / 10" FLOOR min to 30" max Deep Floor TrussesGANTRY 40' Roll Driven Floor Truss Machine / Builds 10" min to 30" max Deep Floor Trusses. $39,500.

MD-10-30-14 FOB Arkansas

$39,500 FOB AR

“Sideways” does not adequately describe the North American solid wood market last week. Producers and customers are facing an entirely new industry, a new supply/demand balance, and a new market reality. While lumber demand continued soft to the end of 2011, the practice of just-in-time buying and only carrying enough lumber inventory as one knew they could sell within a week was a valid business model.

All that has changed and none of the players know how to react.

770-434-1006 / Salter.com



Evidence of this prevailing sense that the business of lumber is currently a mystery came in a couple of forms last week.

8

One was the destruction of Celulosa Arauco’s plywood mill to a wildfire in the Bio Bio region of Chile. The loss of one plant, even with its plywood inventory, log supply, and standing timber, would not normally be enough to effect commodity prices. However, US plywood prices, particularly in the high-grade, sanded products, jumped sharply upward in the very week of the fire. Last week that reaction continued, in addition the effects were felt in Canadian plywood prices. Canadian softwood plywood 3/8” in the Toronto zone spiked $15 msf, while the thicker products saw almost $100 price increases in one week. Such a jump is based purely on nervous traders, not on actual market conditions. This sense of panic even reached players in west side Canadian plywood market last week, again a response completely unfounded in reality.

This volatility, stemming from uncertainty due to the late unprecedented downturn, will likely be experienced through the solid wood market this year.

800-382-0329 2005 Robbins "No Rail" Roller Gantry System

e ic ion $72,000 r P ct NOW $69,000 du e FOB TX R

- 14’ x 130’ System with 2 Roller Gantries -2005 Robbins "Super Torque" 14' x 24" Diameter Roller Gantry (Trackless) -Slotted Top Tables with Pop-up Skatewheel Ejectors -Roof Truss Jig Hardware -Roller Gantry Park Sections -Powered Transfer Roller -Excludes Powered Exiting Conveyor & Finish Roller (available at additional expense) Optional Equipment -Eliminate 99% of the set-up time & all manual jigging by retrofitting the tables with WizardPDS® drop-in ChannelS™ www.wasserman-associates.com

PHONE: 800-289-5627

The other mystery was the sudden increase in 2x6 prices. WSPF, southern yellow pine, and even studs both east and west side, posted sharp price increases from $15 to $50 mmfbm depending on the commodity and region. No valid reason for this increase could be determined by lumber traders, all reported they didn’t really care why it was happening they were just happy for it.

Had this phenomenon occurred in 2x8’s then the suspicion would be that 2x4 supply is tight. In a booming market, mills are known to remanufacturer 2x8’s down to 2x4’s, which of course end up being somewhat smaller than the standard. Builders are usually happy to take the rerun product, which still meets building codes, rather than pay a premium on actual 2x4’s when they become that scarce. 2x6 however is not used in this way.

It’s possible that a new use for wood has been discovered in Asia, specifically China. Updates on this fascinating situation will be given as they occur.

Dimension Lumber Key Prices

For this week’s prices subscribe to Madison’s at www.madisonsreport.com

Product WSPF 2x4 WSPF 2x6 WSPF 2x8 WSPF 2x10 WSPF 2x4 Stud D.F. Green 2x4 D.F. Green 2x10 ESPF KD 2x4 8ft. Stud OSB Ontario 7/16

Read/Subscribe online at www.componentadvertiser.com

Last Week $260 $264 $250 $314 $260 $230 $320 $315 $202

Change 0 +4 0 +9 +2 +12 +10 0 +2 FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Wood Truss Systems

inc.

MANUFACTURERS’ REPRESENTATIVES

January 20th, 2012 #05127 Page #13

Don’t Forget!

You Saw it in the

Toll Free: 888.288.9874

Adverti$er

TRUSS EQUIPMENT

TRUSS EQUIPMENT

TSS Auto (6’-6” x 37’- 0”) Vertical Roof Truss Press

2001 Alpine (100’) Floor Track Gantry System #2

Combining the qualities and expertise you should expect from an industry supplier

2004 MiTek RoofGlider Gantry

94 foot working length, MiTek side-eject system featuring 14 feet working height, tracked system with (12) 6’4” x 14 foot, slotted 3/4” steel-top tables with ejectors

and (6) slots per table. Includes (1) 14’x24” dia. gantry head with operator platform, (10) stand-alone receivers, (20) powered conveyors, (15) idler conveyors, powered transfer roll, air-manifold, gantry head electrical chord system, bridgeplates and Tekset jigging hardware. 208v, 3phase electrical.

$59,900 FOB UT

Tell Them

You Saw it in the

TRUSS EQUIPMENT

Toll Free: 888.288.9874

inc.

MANUFACTURERS’ REPRESENTATIVES

Combining the qualities and expertise you should expect from an industry supplier

$34,500 FOB TX

Mitek Lumber Splicer

d

in

g

HP Hydraulic System. 3" x 12" Maximum Plate Size (2x4 Material). Magnetic Platens for Plate Placement. Pneumatic Lumber Clamps. Foot Pedal Control for Clamping, Dual Push Button Control for Pressing. $4,750 FOB WY Wasserman & Associates 800-382-0329

P

en

Clary Kick Leg Floor Machine

Floor truss press includes gantry head with 20 inch diameter roll, steel table, kick legs, air-cylinder clamping, operator platform and end stops. Builds from 12" to 24" deep trusses, up to 40 foot long. Gantry has toggle forward / reverse & stop controls. Includes partial, overhead plate rack. 230 volt, 3 phase electrical. $11,900 FOB TX NOW $5,900 Wood Truss Systems 888.288.9874 www.woodtrusssystems.com

Advertiser

Wood Truss Systems

R P ed r u ice ct io n

TRUSS EQUIPMENT

2001 Alpine (100’) floor track gantry system / (1) 7.5 HP 24” gantry head / Model 705 / SN 705A1007/ (14) (6’x14’) steel topped tables with 5” wide planks and 1 ½” unistrut “C” channels on each side / (1) pop-up skate roller conveyor / miscellaneous jigging hardware / overhead electrical / no electric poles / 240 volts 3 phase / purchased new 2001 Mechanical: 4½ Stars Appearance: 4 Stars As-Is/Where-Is: FL Salter & Associates 770-434-1006 www.salter.com

6’-6” wide x 37’-0” long clear span table supported with 16” steel “I” beams / Hydraulic vertical gantry head with a 16” wide x 6’-6” platen head / 240 volts but the motors are set up by the factory so they can quickly and inexpensively be rewired for 440 volts 3 phase . FOB GA Salter & Associates 770-434-1006 www.salter.com

2006 MiTek TK-8 Clamp System

MiTek TK-8, Qty. 1 20 ton C-clamp system with overhead beam, jigging, trolley, counter balance arm and manual drive. Reservoir is included. Approximately 14ft X 60ft production table. 220V 1ph electrical. $13,400 FOB OH Wood Truss Systems 888.288.9874

PHONE: 800-289-5627

2001 Alpine (100’) floor track gantry system / (1)

7.5 HP 24” gantry head / Model 705 / SN 705A1006 / (14) (6’x14’) steel topped tables with 5” wide planks and 1 ½” unistrut “C” channels on each side / (1) pop-up skate roller conveyor / miscellaneous jigging hardware / overhead electrical / no electric poles / 240 volts 3 phase. FOB FL. Salter & Associates 770-434-1006

2002 Tee-Lok/MiTek Tee-Tracker Gantry

14' x 72' side-eject, trackless gantry equipment with (10) 6' x 14' slotted, 3/4" steel-top tables with ejectors, (8) powered and (20) idle outfeed conveyor (140' @ 5' o.c.), (1) Tee-Lok Tee-Tracker gantry head. 14' x 24" diameter roll, featuring pendant control, Demag Gmb motor & drive components with auto-lube. Includes electrical festooned cable, (50) pucks, (18) aisle plates, (6) straight bars, (3) ejector plates and (2) T-bars.

Also included is (70') power transfer roll [(4) (10.5') sections and (2) (14') sections].

460v, 3ph, 60Hz. (Additional tables, conveyor, and MiTek gantry head available)

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Wood Truss Systems

inc.

MANUFACTURERS’ REPRESENTATIVES

January 20th, 2012 #05127 Page #14

Don’t Forget!

You Saw it in the

Toll Free: 888.288.9874

Adverti$er WALL PANEL EQUIPMENT

WALL PANEL EQUIPMENT

2007 MiTek Custom

Combining the qualities and expertise you should expect from an industryGantry supplier RoofTracker

System $56,700 FOB TX

2" Ball Coupler. Safety Chains with Hooks.

2,000 Lb Jack with Wheel. Wheel Fenders.

12" White Spoke Wheels. Primed & Painted White. Galvanized Platform Stands.

Galvanized Rollers & Cross Members.

Stainless Steel Guide Pins on 16" Centers.

Stainless Steel Air Cylinders. Stainless Steel Push-In Air Line Fittings. Water Separator & Regulator with Gauge. $15,000 FOB MO. Wasserman & Associates 800-382-0329

Reconditioned Panels Plus 10’ x 20’ Framing Table

-Stud Locators & Pop-up Skatewheel Conveyor on Framing Table -Motorized Telescoping Arms (for wall height adjustments) -No Rail or Track on Floor Increases Operator Safety and Simplifies Clean-up -Excludes Tool Dollies on Framing Table. $9,900 FOB NE. Wasserman & Associates 800-382-0329

P

en d

in

g

70' side-eject, trackless system includes (6) MiTek OEM modified JSP (Jet Set Pro ready) 6'-10" x 14' slotted, 3/4" steel-top tables w/ejectors and (3) Tee-Lok 6’ x 14’ slotted, ¾” steel top tables with ejectors. Features OEM modified 2007 MiTek RoofTracker Gantry head 14' X 24" dia. with operator platform, toggle controls and auto-lube. (Only 520 hours) and 2006 MiTek final press Model 68300. System includes (70’) of powered transfer roll [(4) (10.5') sections and (2) (14') sections], 140’ outfeed conveyor (8) powered and (20) idle conveyors. Also includes airmanifold, electrical festooned cable with mast, (50) pucks, (16) aisle plates, (4) straight bars and (2) T-bars. Includes, 14’ x 24” diameter rolls, panic bars and push-button controls. 460v, 3ph (tables and gantry head designed to fit Tee-Tracker systems only).

NEW PortaFramer 16' x 7'-9" to 10'-6" Trailer Mounted Wall Framer

14' x 84' trackless side-eject gantry. Includes (11) 6'-4" x 14' slotted, 3/4" steel-top tables with ejectors. Includes one (1) model 63750-501 RoofTracker gantry head with a 24" dia. X 14' roll w/joy-stick control. System includes all air-manifold, overhead tracked electrical system, limited jigging hardware, bridge-plates, two (2) parking sections. 460V, 3 ph power.

$79,900 FOB OH

2005 MiTek Roof Tracker System

Pending 800-382-0329

2007 Alpine Model 759A FloorMaster 40' Floor Truss Machine

-24” Diameter Trackless Gantry -Powered Truss Flipping & Ejection -Clamp Cylinders Under Table - O n Ta b l e C h o r d S p l i c i n g -Overhead Plate Rack -10 HP Motor (208 Volt) -Floor Truss Depths from 12” to 24”

PHONE: 800-289-5627

2005 Triad

8

Wall Panel Line

Wood Truss Systems

inc.

MANUFACTURERS’ REPRESENTATIVES

Toll Free: 888.288.9874

Combining the qualities and expertise you should expect from an industry supplier

System includes a 16' long Diamond Quad framing table that builds wall heights from 6'-9" to 12'-3" with quick release feature for VTP, powered pop-ups, (26) Duofast guns, Triad Generation II squaring/ sheathing bridge with laser indicator and side shift, router bridge, (4) 36" wide x 15' long transition conveyors, (1) 1-ton panel hoist, (2) plate carts and (6) standard Triad carts. 120 volt, single phase electrical.

$46,900 FOB TN Read/Subscribe online at www.componentadvertiser.com

$34,600 FOB CO

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

January 20th, 2012 #05127 Page #15

Don’t Forget!

You Saw it in the

Adverti$er

Toll Free: 800-382-0329

Buy/Sell Used Equipment & Manufacturers’ Representative

ALL Reasonable Offers Considered!

1999 Tee-Lok 40' Floor Truss Machine $19,900 FOB SC

Hydro-Air Beaver B-80 Floor Truss Machine $4,900 FOB IA

2000 Genie Model S-40 Manlift

-40' Reach -500 LB Capacity -Dual Fuel Engine -4x4 - 3,203 Hours

PCS/Mitek Power Framer with Smart Crane Auto Wall Panel Stacker

$22,500 FOB NE

Klaisler 14' x 24" Diameter Roller Gantry (Recessed Track). (10) 14' x 76" Steel Slotted Top Tables (WEG-IT) with Pop-up Skatewheel Ejectors. Powered Exiting Conveyor with Receivers -Excludes Finish Roller.

2007 Lauderdale Hamiltion Up-Cut Saw with Mango Plate Marker

29,500 FOB IL

R P ed r u ice ct io n

FOB: LA $12,900.00

LD

2005 Pratt 36'-50' Stretch Roll-Off Trailer -Sliding Tandems -Hydraulic Neck

2003 Klaisler 14' x 78' Side Eject Roller Gantry System

SO

SO

LD

$17,900 FOB LA

Lauderdale Hamilton 24” Super Chop Up-Cut Saw. Mango Plate Marker with Touch Screen Computer. 10’ Infeed & 20’ Outfeed Roller Conveyor with Stands. Dust Collection System.

$14,900 FOB LA

2004 TCT EZ Trimmer

2006 Triad "Diamond Quad" 12' x 16' Framing Table with Tool Dollies

$10,900.00

NEW Panels Plus 12' x 16' Combination Framing/ Sheathing Table

$84,500 FOB MN

-2x3, 2x4 & 2x6 Capacity -Double Bevels on Pitches from 0/12 thru 12/12 -230 Volt / 3 Phase

$6,250 NOW $5,750 FOB LA

FOB TN

Used Norfield Magnum Door Machine & Used Norfield 250M Strike Jamb Router $12,000 FOB OH

Why Buy From Wasserman & Associates?

We offer One Stop Shopping and Competitive Pricing on Complete Systems!

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

WALL PANEL EQUIPMENT

2007 Panels Plus Sub-Component Nailer

-Maximum Opening: 17" x 17 1/2" -On/Off Switches for Each Nail Gun -Button to Activate Squaring Stop -Foot Pedal to Activate Clamping -Excludes Nail Guns $7,950 FOB OH Wasserman & Associates 800-382-0329

January 20th, 2012 #05127 Page #16

Don’t Forget!

You Saw it in the

WALL PANEL EQUIPMENT

Panels Plus Manual Framer

16' x 12' manual framer with 2 three-gun tool dollies with push button controls, stud locaters at 16" & 24" o.c., pop-up skatewheel transfer, motorized telescoping arms for wall height (120v, 1ph), builds walls 2x4 and 2x6 from 6'11" to 12'4". Table is a trackless design for easy install. $17,900 FOB OH. Wood Truss Systems 888.288.9874

Adverti$er WALL PANEL EQUIPMENT

2007 Panels Plus 12' x 16' Framing Table with Tool Dollies

-(2) Three Gun Tool Dollies with Remote Fire & Clamp -Stud Locators at 16" & 24" O.C. -Pop-up Skatewheel Conveyor -Powered Height Adjustment -Adjustable Squaring Stops -(2) Pair of 15' Skatewheel Conveyor with Stands -Excludes Nail Guns FOB: LA - $16,950.00 Wasserman & Associates 800-382-0329

WALL PANEL EQUIPMENT

Wall Panel Equipment Accessories

$850 - 2006 Panels Plus Handle Bar Router $850 NOW $750 - Used Panels Plus 15' Skatewheel Conveyor with Stands (per Pair - 7 Pairs Available) $1,500 - 2005 Panels Plus Sub-Component Layup Tables $1,500 - 2007 Safety Speed Cut H4 Vertical Panel Saw $2,900 - Used Triad CN-4 Sub-Component Nailer $4,900 - 2004 Viking Fastrac 10' Portable Sheathing Bridge $145 Each - 2006 Associated Machinery 36" x 60" Material Carts - 7 Available $950 - NEW Wind Brace Saw for Wall Panel Metal Brace Wasserman & Associates 800-382-0329 www.wasserman-associates.com

NEED HELP WITH YOUR PANELS PLUS EQUIMENT? We offer:

Disassembly & packaging of equipment.

Installation by trained personnel.

Adjustment and calibration of equipment.

Training for operators and maintenance workers.

Recommend upgrade options.

Assistance in getting your fastening tools mounted and operational.

Contact Information:

email: tkaasa@panplus.com Phone:507.377.5341 www.panplus.com www.youtube.com/panelsplus

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Wood Truss Systems

inc.

MANUFACTURERS’ REPRESENTATIVES

January 20th, 2012 #05127 Page #17

Don’t Forget!

You Saw it in the

Adverti$er

2008 Moffett Forklift & '96 Fruehauf 45' Flatbed Trailer Moffett model M80 BC forklift, 70 hours, 8,000 lb. capacity with fork extensions.

Fruehauf flatbed trailer is balanced for the lift. Ideal for wall panel deliveries.

$54,900 FOB MO

Toll Free: 888.288.9874

8

www.woodtrusssystems.com

Wood Truss Systems

inc.

MANUFACTURERS’ REPRESENTATIVES

MiTek PCS Component Express Conveyor M i Tek / P C S C o mp o n en t Express conveyor, transfers wall subcomponents & parts between nailing stations and a framing station. Toggle controls, (2) 18” wide conveyors, 5 feet long each, included. 1 HP motor. 480 volt, 3 phase.

$3,200.00 NOW $1,500 FOB TX

Toll Free: 888.288.9874

www.woodtrusssystems.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Adverti$er

You Saw it in the

TRUCKS & TRAILERS

TRUCKS

&

TRAILERS

TRUCKS

&

TRAILERS

R P ed r u ice ct io n

TRUCKS & TRAILERS

Don’t Forget!

January 20th, 2012 #05127 Page #18

1994 Wabash T-30 Trailer

48 ft long, sliding tandem, fifth wheel neck, hydraulic lift, no locking rollers, passed DOT, no ABS, brakes average. 68,000 lb. capacity. $8,100. NOW $4,900 FOB MI. Wood Truss Systems 888.288.9874

MAKE AN OFFER!

2005 36’ gooseneck tilt trailer Includes in-bed hitch

1999 Western Star Truck with National 990 Crane

2008 Precision 42-60' Stretch Roll-Off Trailer (4001c)

Price: $19,900 :: FOB TX Condition: Good Category: Trailers and Rolling Stock Description: Precision roll-off 42 x 60 ft stretch trailer, 102" width. Features include ABS, locking rollers, controllable rollers, sliding tandem axle, hydraulic lift neck and expanded metal deck between rolls. Needs two tires and one replacement roller. 64,000# GVWR. Wood Truss Systems 888.288.9874 www.woodtrusssystems.com

Model 4964F Truck with 20’-6” Flatbed.

475 HP CAT Engine. 8 Speed Manual Transmission. 215,885 Miles, National Model 990 Crane, Crane Capacity: 46,000 Lbs. 90’ Boom with Jib Option. $74,900 FOB OH. Wasserman & Associates 800-382-0329 www.wassermanassociates.com

2007 Komatsu FG45T-8 Forklift

8,870 Lb Capacity, Dual Fuel, 1199 Hours Optional Fork Extensions are Available. $27,800 FOB LA Wasserman & Associates 800-382-0329

Page 15 No-Change ...

(manufactured 12/19/05) MD 06 Ultralight Weight / Vin 1P9GR36226F554005 / 20k Axle / 25,900k GVWR. Electric / brakes 90% / Tires 90%. FOB LA Salter & Associates 770.434.1006

Price Reduction 01 Haulin (Stretch 48 -70 )

2000 Raglan Trailer 48’

2004 Pratt 48' Roll-Off Trailer

48 ft long, sliding tandem, fifth wheel neck, electric lift, locking rolls, passed DOT in April of 08, no ABS, brakes average. 78,000 lb. capacity. $9,800. NOW $7,800 FOB MI. Wood Truss Systems 888.288.9874

We go to any lengths to expand your opportunity.

PHONE: 800-289-5627

-Sliding Tandems -Hydraulic Neck $8,500 FOB OH Wasserman & Associates 800-382-0329 www.wassermanassociates.com

$8,900 /FOB FL Dual axle trailer in good working condition. Some minor surface rust.

Slanted profile w/ fixed tandem. 68,000 Gross Vehicle Weight Rate and a Gross Axle Weight Rate at (2) 20,280. #T1016 Truss Machinery Connections 800-580-6430

You find the opportunity -- we’ll build you the products to meet it.

Whether it’s a 70’ squaring table or a 16’ sheathing station. We have a proven track record of building robust, well-engineered equipment within your time frame. And we install it and start it up promptly.

Each of these machines was built to provide custom details to fit the customer’s plant.

76 feet of Expanded Wall Opportunity required a “custom built “ wall table with optional Dual Beams & Plate nailing tool carriages.

• Wall Framers

• Combination Tables – frame, square & sheath on one table

• Single or Dual Tool Beam Sheathing Bridges

Contact Tim Kaasa about custom solutions for your plant Wall Framing Made Simple

An

Company

866.726.7587 or www.panplus.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

January 20th, 2012 #05127 Page #19

Don’t Forget!

Wood Truss Systems

You Saw it in the

Adverti$er

inc.

MANUFACTURERS’ REPRESENTATIVES

Toll Free: 888.288.9874

R P ed r u ice ct io n

Combining the qualities and expertise you should expect from an industry supplier

2005 Robbins No-Rail Gantry

14'x180' trackless gantry with aisles. Includes (2) gantry heads, (26) plastic-top, steel tables with ejectors and full-length powered transfer roller. Each gantry head includes an AC invertor soft start control with 15 HP drive. System includes air-manifold, bus-bar electrical, jigging hardware and bridge-plates. 440v, 3phase. Seller is willing to sub-divide this system. $79,000 NOW $59,000 FOB TX

PA

2008 IBS Yard Barn Wall Panel Line

FO

B

-

$24,900 FOB MI

Custom Yard Barn system includes Special 16' framing table with laser guided tool dollies with multiple panel set-ups (two 4' and two 2' sections), to squaring sheathing table, includes joy-stick controlled single-tool nailing bridge with tilt-beam function for accurate seams, System features full-length 40' Panel Transfer System with stops, two 20' skate-wheel conveyor sections and sheathing staging area with panellift, equipment in good working condition and available for immediate use, 230v, 3ph. (System priced new at over $130,000). $24,900FOB MI

2004 Ruvo 925 Door Machine

Model 925 pre-hung door machine handles both interior or exterior doors. It machines the door, hinge jamb, strike jamb, drills and fastens the hinges for door sizes 6’-8” to 8’-0”. Handles door thicknesses of 1 3/8 inch or 1 3/4 inch. 440v, 3 phase electrical.. $19,000 FOB PA

2005 (8) Projector SL Laser System

R P ed r u ice ct io n

Eight-projector system with two computers, model SL 400205 GBPU, Pro director 4. Includes cables, 20’ projection area per head, green lasers. Software license required.

$62,600 :: FOB AZ Condition: Good 2005 Koskovich Auto Omni $52,900 FOB UT

NOW $49,900

Fax: 765-288-9991 PHONE: 800-289-5627

www.woodtrusssystems.com Read/Subscribe online at www.componentadvertiser.com

Phone: 765.751.9990 FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget!

You Saw it in the

Adverti$er

January 20th, 2012 #05127 Page #20

TRUCKS

&

TRAILERS

800-382-0329 www.wasserman-associates.com

Truck & Trailer Values get You Rolling NOW! 2004 Moffett M5500 Piggyback Lift with 2002 Great Dane 42' Flatbed Trailer

FOB OH $17,900.00 2005 Pratt 36'-50' Stretch Roll-Off Trailer

-Sliding Tandems -Hydraulic Neck

1999 Sterling Tractor

1999 Sterling L7500 truck tractor. Tractor has a 3126 CAT diesel engine, 224 HP, CD player, cruise, 22.5” tires, 180,000 miles, 8LL transmission and passed DOT inspection. $11,900 FOB CO. Wood Truss Systems 888.288.9874 www.woodtrusssystems.com

Tell Them

You Saw it in the

Advertiser Kubota Diesel, 5500 Lb Capacity, 10' Mast, 1000 Hours, Pallet Forks, Side Shift, Tilt, Serviced w/50% Tires. 2002 Great Dane 42' Flatbed, 42' x 96", Headboard, Toolbox, Winches and Straps, Aluminum Wheels, DOT Inspected, Moffett Mount Kit.

R P ed r u ice ct io n

1997 Ford Truck with 2002 PM Knuckle Boom Crane

$49,900 FOB ND

-New Paint PM Crane Model 14024 -Dual Side Controls -40'-8" Reach

Location: CO Price: $9,900.00 Lumber/Teeter Carts

-20 Available -6,000 Lb Capacity -Rubber Tires & Swivel Casters Location: SC, Price: $395.00 Each Wasserman & Associates 800-382-0329 www.wasserman-associates.com

8

-400 Degree Rack & Pinion Rotation -Check Valves on All Cylinders -Overload Relief Valves -Hydraulic Load Limit Device -Dual Outriggers w/19'-8" Span -New Paint

2004 Volvo VNL64T300 Truck

-Engine: D12-435, 435 HP, 1550 Torque, 342,000 Miles -Transmission: ZF Meritor MO-15G10A-M15 -Tandem Axle, 40,000 Lb Rear Axle Capacity -3.73 Rear Axle Ratio w/Interaxle Diff. Lock -Wabco ABS Brakes & Exhaust Brake -200 Gallon Diesel Capacity -Day Cab with Aero Cab Package -Reference Photo 2 for PDF Photos

$37,500 FOB MO

PHONE: 800-289-5627

MISC.

-Sliding Tandems -Hydraulic Neck -Less than 500 Miles on Tires

$22,500 FOB OH.

1997 Ford LTL A9000 Truck -Engine: Series 60 Detroit 430 HP -12,000 LB Steer Axle -40,000 LB Rockwell Differentials 3:58 Gears -Transmission: 10 Speed RTLO 15610B

1995 Wabash 36'-50' Stretch Roll-Off Trailer

Read/Subscribe online at www.componentadvertiser.com

Federal Pacific Transformer Company 45 KVA Step Up Transformer (240 to 480 volts) 45 KVA @ 150C Rise IMP 5.10%, High Voltage 480 (H), Low Voltage 240/120 LT (X), Weight 345 lbs. , 60 HZ / 3 Phase, 220 C Insulation System FH4G, Ambient Temp 40C Max, / Series 4192 / File E7783 / Catalog # T43T45 Salter & Associates 770-434-1006 www.salter.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

January 20th, 2012 #05127 Page #21

Don’t Forget!

You Saw it in the

Adverti$er

Wood Truss Systems

Toll Free: 888.288.9874

inc.

Price Reduction

800-382-0329

MANUFACTURERS’ REPRESENTATIVES

Combining the qualities and expertise you should expect from an industry supplier

8

2006 Omni Miser Automated Material Picking System $89,000 FOB SD

-Incline Live Deck -(1) Standard Bulk Feeder -(3) Shuttle Bulk Feeders -(3) Magazines -New Price is Over $325,000!

Option to Omni Miser Picking System. -The standard NEW WoodRunner System is $119,900 $114,900 which includes 4 Bunk Stations & 1 Pieces Station (with 3 Magazine Racks & 1 Manual Load Shelf) -Eliminate the picker and dramatically increase the Omni Miser or ALS Saw output with the WoodRunner!

Click for WoodRunner Details: http://apexmw.com/ MISC.

2005 Williams Pulverizer

Model “Hog C32” 100 HP, heavy-duty wood waste system includes crushing unit, waste blower, hopper and discharge ductwork. Generates 1 ½ tons of material per hour maximum capacity. The drum is 24 inch diameter, uses hammers at 3200 RPM to pulverize wood scrap into saleable waste. 460v, 3Ph power. Serial #20585.

$8,000 FOB TN

MISC.

MISC.

1987 Jager TTS Auto Lumber Stacker $14,900 FOB NB Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2005 Kaeser Model ASD40 Air Compressor with Kaeser Model TD51 Dryer -Direct Drive Rotary Screw Compressor delivers 191 CFM at 125 PSI -Storage Tank -40 HP / 480 Volt / 3 Phase $9,900 Wasserman & Associates 800-382-0329 www.wasserman-associates.com PHONE: 800-289-5627

MISC.

2004 MiTek Lumber Splicer

MiTek Chord Splicer - Model 88560-501 - Hydraulic system splices 2x4 chords (minimum material length 17") for floortruss operation with maximum plate size of 3" X 12" with dual action pressing platen.

Dual hand controls, and magnitic plate positioning allows for safer operation. Plate storage bin, and conveyor. 5HP motor, 20 gal. hydraulic reservoir, 460v, 3ph, 60Hz. Wood Truss Systems 888.288.9874 www.woodtrusssystems.com

Your Ad Could be Here 2007 Hydrovane HV15 Rotary Air Compressor with Sullair SR75 Refrigerated Air Dryer 77 CFM, -20 HP / 230 Volt / 3 Phase, Manchester 200 Gallon Vertical Tank. $7,750 FOB LA. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Read/Subscribe online at www.componentadvertiser.com

Advertising Rates & Forms

Advertising rates and forms are available at

www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Wood Truss Systems

inc.

MANUFACTURERS’ REPRESENTATIVES

Don’t Forget!

You Saw it in the

Toll Free: 888.288.9874

Combining the qualities and expertise you should expect from an industry supplier

Adverti$er

January 20th, 2012 #05127 Page #22

MISC.

8

NEW SnoVantage Skidsteer Snow Plow

WoodRunner by Apex Machine Works $114,900 FOB MN

Wing Span Open: 20', Closed: 9 1/2' . Center Section: 7 1/2'. Wings: 6' . Front Skin: 10 Gauge. Rear Structure: 1/4" & 5/16".

Aeroquip Hydraulics. $8,500 Retail, Now $6,000 FOB ND. NOW $5,000 Wasserman & Associates 800-382-0329

McGlaghlan EX-50 Lumber Carousel

The WoodRunner is a revolutionary step forward in automated lumber retrieval systems. As a totally automated system, the WoodRunner eliminates the costs and limitations associated with manulally fed saws. This proven technology brings a new level of versatility, efficiency and accuracy to picking and feeding lumber to saws like Omni Mizer, Alpine's ALS and other linear saws. Click on the photo for additional images, a brief VIDEO, or to download a Brochure and a footprint layout for Wood Runner Miser Specs or Wood Runner Alpine ALS Specs.

MISC.

MISC.

Model EX-50 Expediter, lumber carousel, seven (7) station, nominal 50 foot diameter, material handling system with track.

Maximum bunk length 20'. Includes toggle controls and 5 HP, hydraulic drive motor.

240 volt, 3 phase electrical. $8,900 FOB TX. Wood Truss Systems 888.288.9874 www.woodtrusssystems.com

MISC.

2003 Virtek LPS-6R Laser System

2005 Kaeser ASD-25 Compressor, Dryer & Tank

1999 Holz-Her Accura "S" 14' Beam Saw

Model CA80. 230V 3ph. $12,500 FOB NE Wasserman & Associates 800-382-0329

PHONE: 800-289-5627

Kaeser screw type compressor model ASD 25, serial #100618-10001 with a 25 HP motor, belt drive and digital controls, along with a Kaeser dryer model KAD-115.

Includes one large storage tank. $6,500 FOB TN. Wood Truss Systems 888.288.9874

McGlaghlan EX-30 Lumber Carousel

Model EX-30 Expediter, lumber carousel, seven (7) station, nominal 30 foot diameter, material handling system with track.

Maximum bunk length 16'. Includes toggle controls and 5 HP, hydraulic drive motor.

240 volt, 3 phase electrical. $7,900 FOB TX Wood Truss Systems 888.288.9874 www.woodtrusssystems.com

Read/Subscribe online at www.componentadvertiser.com

Virtek truss projection system, quantity of fourteen (14) model LPS-6R red-laser heads, with 16’ coverage each, system PC. Heads have been under OEM maintenance agreement since new, Windows 2000 PRO O/S, Virtek TrussLine version 4.4/1.118.

Virtek license agreement required, Virtek maintenance agreement suggested (call for additional cost estimates).. $6,195 and $4,950 each FOB OH. Wood Truss Systems 888.288.9874 www.woodtrusssystems.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

MISC.

Refurbished 2005 Hain 20Ft. Measuring System

2005 Hain power head 1/4 HP electrical unit with new steel rails, pusher and stops, 20 foot long from OEM, measures lengths in feet, inches and fractions of an inch. The Hain MEA is a consistent way to measure your product, can adapt to any saw, allows left or right hand operation. OEM can custom build the unit to length up to 20 feet.

110 volt electrical.

Wood Truss Systems 888.288.9874 www.woodtrusssystems.com

January 20th, 2012 #05127 Page #23

Don’t Forget!

You Saw it in the

MISC.

2007 Kaisler Rolsplicer

Splices in vertical orientation and forces lumber together (compression) prior to plate pressing, single operator easily trained to accomplish accurate, reliable splices.

Splices 2x3, 2x4 and 2x6 lumber. Includes two recessed simultaneous activation buttons, guarded motors and sprockets, and a 3 HP motor. Includes 10 foot infeed and 20 foot outfeed conveyors. 460v, 3 phase Wood Truss Systems 888.288.9874 www.woodtrusssystems.com

Adverti$er MISC.

MISC.

Like New Altman Model 122 Dustless Sheetrock Saw

Call for Price. FOB NE. Wasserman & Associates 800-382-0329

Murphy-Rodgers MRT-9A Dust Collector

-Air Delivered: 1,740 CFM -Free Air: 2,400 CFM -9" Inlet -5 HP / 3 Phase Motor with Starter -Includes 2 Filter Bags, Plenum & Vertical Piping to Plenum -Add $100 for (2) 55 Gallon Drums

Virtek Laser Projection Heads

QUANTITY ten (10) red-laser heads (only) for up to 140 ft. projection @ 16' ceiling ht. Heads are model LPS-2D that were under OEM maintenance agreement since installation. Virtek license agreement required, OEM inspection required to obtain continuing maintenance agreement and installation. Contact us for serial number history per OEM records. $39,900 NOW $29,800 FOB IN. Wood Truss Systems 888.288.9874

GET RESULTS ! with the

Advertiser

NEW Monet DeSauw Wood Finger Jointing Line

Cut-Off/Shaper Unit. 5 HP Saw to CutOff Angles. 25 HP Cutter Head to Shape/ Fingerjoint Ends. Shape up to (8)2x4's or (5)2x6's. 480 Volt / 3 Phase / 60 Amp.

2006 Allison Material Carts

PHONE: 800-289-5627

inc.

Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Toll Free: 888.288.9874

MANUFACTURERS’ REPRESENTATIVES

Combining the qualities and expertise you should expect from an industry supplier

Glue Station - Apquip Glue Applicator & Valve. 6 Gallon Glue Pot. 110 Volt / 1 Phase / 15 Amp. Finger Joint Press -Hydraulic Press for 2x4 and 2x6 Material. Internal Cut-Off Blades for 8' & 9' Studs. 480 Volt / 3 Phase / 20 Amp. Includes Installation & Training in the United States & Canada.

Advantages: -Reduce Waste -Positive Ecological Impact -Produce Straight Material $79,900 FOB MO Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Material carts feature heavy duty tubular/CChannel construction with two (2) uprights, 3' x 5' with four (4) phenolic casters (fixed) allowing for "teeter" maneuvering. Quantity of (35) available. $95 EA, FOB SC Wood Truss Systems 888.288.9874 www.woodtrusssystems.com

Wood Truss Systems

$990

Hain Powered Measuring Systems

-20' Hain Measuring System with Conveyor & Stands (No Infeed Conveyor) -15' Hain Measuring System with Infeed & Outfeed Conveyor & Stands $2,900 EA FOB NE Wasserman & Associates 800-382-0329

2004 Hain 60 Ft Measuring System

Hain Company measuring device model MEA, 1/4 HP electrical linear actuator unit with steel stops and pusher, 60 foot long, measures lengths in feet, inches and fractions of an inch. Includes conveyor with legs and 2" x 4" x 1/4" aluminum extrusion. The Hain MEA is a consistent way to measure your product, can adapt to any saw, allows left or right hand operation. 110 volt electrical.

$9,900 FOB CA

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

MISC.

Don’t Forget!

You Saw it in the

Tell Them

You Saw it in the

Advertiser

Wood Truss Systems inc.

Adverti$er

MISC.

bargain basement

2005 Hain Sub-Component Nailer

2005 Hain Sub-Component Nailer Model SCN - Sub-component assembler includes optional set up for coil fed nail guns. This model SCN handles 2x4 and 2x6 material and requires 100 PSI of air along with 120 volt electrical service. Includes automated off-feed system, ten foot long infeed and outfeed conveyors. System INCLUDES over 20 boxes of 10Dx.131 coil nails (4,600 nails per coil). $10,820 FOB MI. Wood Truss Systems 888.288.9874 www.woodtrusssystems.com

January 20th, 2012 #05127 Page #24

Priced to move - offers welcome NEW Strong Hold Topview Computer Cabinet

-26" Wide x 24" Deep x 66" High with 6" Legs -Polycarbonate Window -Welded-In 12" Deep Keyboard Shelf -Three Point Locking System -Fan for Hot Air Evacuation -2 Adjustable Shelves in Lower Cabinet $950 FOB NE Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Toll Free: 888.288.9874

MANUFACTURERS’ REPRESENTATIVES

Combining the qualities and expertise you should expect from an industry supplier

1997 PCS Hercules Auto-Feeder

Three (yes 3) Idaco Componamatic Saws plus One (1) Speed Cut Parts Saw Location: IL Price: $5,250.00 For All 3 Componamatics -2 Working Saws, One Parts Saw -2 Scrap Conveyors

12 7 Manual Component Saws - $7,500 & Under $6,900 - FOB NE - 1989 TimberMill 6-20 Component Saw $7,500 - FOB NE - 1995 Clary Master 5 Blade Component Saw $7,250 - FOB AB - 1990 TimberMill 6-20 Component Saw $7,000 - FOB AZ - Mid-90’s Mitek Easy Set 1000 Five Blade Component Saw $5,500 - FOB MI - 1992 Mitek Easy Set 2000 Five Blade Component Saw $5,000 - FOB VA - Clary 4 Blade Component Saw $4,900 - FOB MT - Idaco Componamatic 4 Blade Component Saw

3 Used Lumber Splicers - $2,000 & Under (OH, IL & IA) Used Tee-Lok 14’ x 78’ End Eject Roller Gantry System Location: MI Price: $19,900.00 NOW $16,900 Tee-Lok 14’ Roller Gantry (Track Mounted) (10) 6’ x 14’ Tables with Pop-up Roller Conveyor (For End Eject) Roof Truss Jig Hardware Tee-Lok 14’ Finish Roller Add $4,000 $3,500 for 2nd Tee-Lok 14’ Roller Gantry Add $5,000 $4,250 for 2nd PE & E 14’ Finish Roller

sold

Used Stair Clamp - FOB NE - $1,500 -Hydraulic Clamping - 240 Volt / 3/4 HP / 4 Amp Motor -(8) 9” High Side Clamps - 148” Frame Length - 34” to 50” Clamp Width NEW Wind Brace Saw for Wall Panel Metal Brace - FOB NE - $950 Used Idaco Webmatic 4 Blade Web Saw FOB: MN - $9,900.00 NOW $7,500 -Manual Angulation -16’ Capacity Waste Conveyor & Short Incline Conveyor to Adjacent Saw - 480 Volt/3 Phase Add $4,000 for 22’ Live Deck with 7’ Skatewheel Conveyor Extension

$4,499 FOB SC Model HAF-620 for component saw, handles lumber from 3’ to 20’, 6 rail/pedestal, safety-guarded sprockets, SM-Cyclo gearmotor, HD I-beam construction, photo-eye lumber stop PLUS foot-pedal control, adjustable swivel base feet, easily shipped and installed.

460V, 3ph.

PHONE: 800-289-5627

Used Full House Assembler FOB: OK - $1,900.00 Assemble Interior & Exterior Doors & Jambs Height: Up to 8’-0” - Width: 1’-0” to 8’-0” -Excludes Staple Guns

Toll Free: 800-382-0329

www.wasserman-associates.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget!

You Saw it in the

RUVO 512 Strike Jamb Router

-Jambs up to 1 1/4 x 10" x 9' -Strike Mortise up to 6" -Adjustable Jamb Stops -Foot Pedal Clamp -Porter Cable Router -120 Volt / 20 Amp FOB: MO Price: $1,500.00 Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Adverti$er

Door & Stair Equipment

800-382-0329

R P ed r u ic ct e io n

Door & Stair Equipment

January 20th, 2012 #05127 Page #25

2001 Norfield Signature Series Magnum Door Machine

Includes Nasco Model WP-539 Auto Feed Screwdriver & 2 Routers. $19,900 FOB AZ NOW $16,900 Wasserman & Associates 800-382-0329

1985 Norfield Magnum II Door Machine $9,900 NOW $8,500 FOB AZ

Roller Table (16' x 5' x 32")

Norfield 1020 Double-End Trim Saw

Norfield 1020 Double-End Trim Saw Miter cuts or square cuts can be compound/ beveled up to 10º to create a snug fit for any casing material, hopper fed, compound angle adjustments for a variety of cuts, 10” blade, easy adjustment for 45º to 90º , Material width from 1’6” to 8’0”, length from 1” to 3.5”, thickness from 3/8” to 1.5”, at an average of 24 cycles per minute. 230V, 3PH $10,900 Wood Truss Systems 888.288.9874

-Gravity Rollers at 2' O.C. -3 Available, $800 ea, FOB NE Wasserman & Associates 800-382-0329 www.wasserman-associates.com

new equipment showcase

Reconditioned 1999 Norfield 3800 LRO Door Lite Machine

Window Lite Cutting, Cylinder Lock Boring, Latch Drilling, Faceplate Routing, Overhead Template. $12,500 FOB OH. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

January 20th, 2012 #05127 Page #26

Don’t Forget!

Adverti$er

You Saw it in the

new equipment showcase

On the Cutting Edge...

New! Porta Field Press

New! Roll Splicer

The Measuring System (MEA) is the fastest, most consistent way to measure and cut your product! Read more about where this machine can be used, and how it can be added to your existing sawing equipment.

The Folding Measuring System (FMEA) provides the same fast accurate measuring and cutting as the original MEA but in a smaller, portable version.

The Table Measuring System (TMEA) provides the same fast accurate measuring and cutting as the original MEA but in a smaller version.

Features: • • • • • • • •

Vertically Splices 2x3, 2 x 4, and 2 x 6 lumber (3 to 4) second align, roll, eject, cycle time (2) recessed / simutaneous activation required / saftey controls Guarded motor and sprockets 3 HP heavy duty Sumitomo brand electric motor Air operated / bearing mounted / solid steel hold down rollers Both top and bottom bearings are adjustable with single crank Anti-abrasible resistant steel wear slide plate in the splice area

Call 770-434-1006 For Details Salter & Associates www.salter.com

We go to any lengths to expand your opportunity.

PHONE: 800-289-5627

Features: • • • • • • • •

The Portable Measuring System (PMEA) provides the same fast accurate measuring and cutting as the original MEA but in a smaller, portable version.

Presses roof and floor trusses 4 x 4 " p l a t e n 5 ton, 1 1/8 dia Cylinder 5 ton, C-Clamp-Weight 35 lbs 10,000 psi hydraulic 2 stage power unit / 110 Volts-Weight 40 lbs 10,000 psi 10' length hose Simple toggle switch operation Magnets hold connector plates while moving press unit into place

The Manual Measuring System (MMEA) adjusts quickly with a turn of a handle without changing the operator's position on the line.

The Vent Block Drill (VBD) is designed to make lumber, truss and wall panel manufacturing yards more efficient by easily converting scrap wood into useable vent (frieze) blocks in seconds.

Direct Lender Financing Ed Ragofsky 561.309.7652 eragofsky@msnbank.com

Phone: 530.295.8068

Fax: 530.295.0468

Email: margie@thehaincompany.com - www.thehaincompany.com P.O. Box 238 - Rescue, CA 95672

You find the opportunity -- we’ll build you the products to meet it.

Whether it’s a 70’ squaring table or a 16’ sheathing station. We have a proven track record of building robust, well-engineered equipment within your time frame. And we install it and start it up promptly.

Each of these machines was built to provide custom details to fit the customer’s plant.

76 feet of Expanded Wall Opportunity required a “custom built “ wall table with optional Dual Beams & Plate nailing tool carriages.

• Wall Framers

• Combination Tables – frame, square & sheath on one table

• Single or Dual Tool Beam Sheathing Bridges

Contact Tim Kaasa about custom solutions for your plant Wall Framing Made Simple

An

Company

866.726.7587 or www.panplus.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget!

You Saw it in the

Job Opportunities IMMEDIATE OPENING .com, inc.

Georgia 800-289-JOBS SeniorinDesigner - Truss Truss Designers

JobLine

The

Adverti$er

Time To Hire?

We’re here when you need help!

www.thejobline.com or call Thomas McAnally for Personalized Service STRICTLY CONFIDENTIAL! IMMEDIATE OPENING Estimator - Truss

Location: Mid Atlantic Estimator for Single Family Custom, Commercial, and Multifamily. Must have experience with MiTek eFrame for estimating. Truss Design is not the main focus of this job. Other pre-screening specifications apply Compensation: $20hr.+- ($50k+- w/OT) based on ability and experience. Relocation assistance is negotiable. Priority for low cost and no relocation candidates.

ID: J10475

IMMEDIATE!

This opportunity is for a specific type of Truss Designer. If you have scored in the Senior Designer or upper levels on the JobLine Design Skills Evaluation using ONLY a calculator, in what we consider a very fast completion time, your skills are perfect for this position. If you are knowledgeable in designing high end, complex projects that are detailed and require exceptional ability, and thrive on challenges and are willing to learn new approaches, this may be what you have been looking for. The company will invest in your training, both initially and ongoing to keep your skills at peak performance. Because of that, no job hoppers will be considered.

We have specific instructions on what type of candidate they will accept, and we will be closely screening candidates for this opportunity. This is the perfect chance for someone who is topped out at their current employer to move up in responsibility and compensation. Priority is for currently employed superstars, but if you were laid off and have been a top performing Senior Designer in the past 1-2 years, don't pass this one up.

Compensation: Starting salary is open, but expect to show your abilities before you get top compensation. Designers at the level we need for this position can make in the $70's and more, based on performance. That is 2011 numbers, not back in the good olé days.

Benefits include: Medical, Dental, Vision, 401K and/or other retirement programs.

Relocation is acceptable and expenses are open to negotiation for the right candidate.

ID: J10473

@JobLine

NOW!

send your resume to mail@thejobline.com or Register On~Line at www.thejobline.com Strictly Confidential!

Sales/Plant/Design/Estimating Manager

Are you a multi-tasker with the ability to grow sales, lead design, and manage operations for a plant that has potential to produce $20M? The job requires someone who has experience with total takeoff, design/layout/engineering using MiTek software, manufacturing operations, and managing multiple department while focusing on growing sales. The ideal candidate will have either been a GM or past owner, who came up through the business in manufacturing, design or sales. If this is a possible match for what you are looking for, let's talk!

The JobLine.com, Inc. Thomas McAnally 800-289-5627 thom@thejobline.com

Design Manager Truss/EWP/MiTek

Building Components Industry Advertising Sales How Can You Help Us Grow?

With 3 years of publishing history, the Component Manufacturing Advertiser is growing. We need someone who can work closely with industry suppliers to develop long term advertising relationships.

Yes you will have a start up curve, but as any true sales professional knows, this can be a money maker once your sales turn into advertising orders and residual income builds. There is only one sales rep position, no territories. This is a high commission only job, but with a residual income potential that can justify a full time effort. The compensation plan has yet to be developed and is open to negotiation.

Contact Thomas McAnally in Strict Confidence twm@thejobline.com or 800-289-5627 PHONE: 800-289-5627

Needed

New opening for a seasoned Design Manager or Senior Designer who can implement an improvement program, training, and grow current department capabilities.. The candidate should be very technical, have strong MiTek experience, be people oriented with an ability to get results. The employer wants someone who will commit and become part of the company family. Location is central Canada, cold winters, snow, truly 4 seasons so you southern candidates are not likely to get considered without some history in a similar region. Dollar volume $10M now, but lots more in the past and looking like it will continue to grow from here.

Compensation: $65-75k, depending on your ability, experience, and fit in the job.

They have a performance based bonus program.

Thom's Notes: US Candidates must have a two year degree or training certificate in a drafting/design or cad related field and 3 years experience in the job to be considered.

J10452

Read/Subscribe online at www.componentadvertiser.com

January 20th, 2012 #05127 Page #27 Multifamily Modular Design Manager

West coast.

Professional opportunity at the corporate office, not the plant. Must have Multifamily and modular building experience. Engineering or Architectural Degree preferred but will consider modular design management experience as a factor.

The Modular Design Manager will be responsible for developing product designs for projects, new product innovation, and business development support. This person will drive product design and engineering, quality assurance, code compliance, and alignment with our sustainability standards.

The Modular Design Manager will develop green technology specifications that are cost effective. This person will monitor production and sales related to procedural compliance, quality control, manufacturing engineering, and cost reduction programs.

This position is based on the west coast, and will require frequent weekly travel to manufacturing and client locations.

Key Requirements • Minimum 5 years experience with systems-built structures and third party submittal procedures; • 4-year degree in architecture or related field; • Complete working knowledge of design, structural and plan approval packages, and all building code requirements, including, but not limited to, (a) UBC, IRC, CBC, Commercial Building codes; • Strong experience with drafting software such as AutoCAD; • Familiarity with lean manufacturing operations methodology; • Experience working closely with engineering and manufacturing for integrated design implementation.

• Experience with multifamily and commercial construction projects $90-120K+- ID:Mod12001

LGS Truss Designer - South

New opening for an LGS Designer with Aegis software experience. $35-50k.

Relocation assistance negotiable.

The JobLine.com, Inc. Thomas McAnally 800-289-5627 thom@thejobline.com

Catch us on thejobline.com FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget!

You Saw it in the

Adverti$er

January 20th, 2012 #05127 Page #28

Available candidates

JobLine.com, inc.

The

800-289-JOBS

Time To Hire?

We’re here when you need help!

www.thejobline.com

These and additional candidates are available through theJobLine. com, Inc. All inquiries are strictly confidential. Fees are contingency based and only due if you hire or engage a candidate we present. Low cost, flat rate fees quoted upon request.

Contact Thomas McAnally thom@thejobline.com www.thejobline.com 800-289-5627 x 1

Multifamily Designer/Design or Plant Manager - Truss/Panel

Supervise wood truss design/pricing department for single, multifamily, and commercial construction for a $28 million plant. Perform recruiting, training and management of design staff. Complete design and engineering of complex truss systems. Develop design department procedures, training program, and methods to measure productivity for all of the Eastern Division plants. Assisted with training new Managers in company procedures. Prior experience as Plant Manager & Production Manager of truss & panel plants, 25+ production workers. MiTek, eFrame, PanelBuilder advanced user, CAD, Excel, too.

Compensation: $55k+ Relocation: USA - ALL States ID: C11051

Catch us on thejobline.com PHONE: 800-289-5627

Senior Designer - Truss/Panel/ Wood or Steel

As a production designer I produce between $200,000 - $300,000 per month in cold form steel roof truss designs, mostly commercial projects. As a designer the majority of my projects are being built in the pacific northwest and military projects in California, shipped from our facility in Colorado.

Contact the customer: Many of my projects are "design/build", extensive contact with Architects and Engineers is required to problem solve engineered truss to bearing connections, progressive collapse systems, seismic/ lateral loading, misc material (ridge angle, eave angle etc) Design: Ensure that my designs are accurate, efficient, cost effective.

Utilizing CAD, ensure that all truss to truss, truss to bearing, misc materials, truss placement, cross sections, any special connection details are accurate and clearly drawn to scale for approval/ field use. Ensure all details are clearly marked on the shop drawings as my production packs are presented to the shop for fabrication.

Documentation: Build a library of reference material, blanket seals, truss to truss connections etc. Log any and all RFI's required for any project I'm working on.

If this is the job you need done, Candidate is asking upper $40's to $50's Relocation: CO, USA - Western ID: C11592

Senior Designer/ Design Manager/Estimator/Inside & Outside Sales - Truss

JobLine Certified Senior Designer.

Candidate has 17 years industry experience and 17 years experience in this position.

Products include floor trusses, roof trusses, and I-Joists. Markets include tract, single family, custom, high end, multi-family, light commercial, and agriculture. Primary duties include design, layout, optimization, cutting/production documents, and takeoff.

Secondary duties include checking others work, scheduling, repairs, customer service, inside sales, field measurements, software maintenance, network administration, training, and filling in for the Design Manager as needed. Software experience includes Alpine, MiTek, and AutoCAD. Education: High School Graduate and Bachelors degree in Math (Strong Trig/ Math skills) Compensation desired: Salary $40k+ Relocation: FL, GA, KY, USA - South, TN, NC, SC, WV ID: C10145

Designer/Design Manager Truss/Panel/EWP/I-Joist

Design Manager: Supervised 6 designer.

Utilized MiTek Sapphire, 20/20, MBA, EFrame and OptiFrame as well as GP I-Joist programs. Design commercial, tract and custom projects for quotation and sales.

Produced shop drawings for production.

Utilized MiTek Sapphire Structure, MiTek 20/20, MiTek MBA and joist/beam calc programs. Worked closely with sales force and customers to produce best design possible.

Compensation: $50's Relocation: USA - ALL States ID: C11005

JL Senior Designer(5) Design Manager Truss/Single & Multi Family

17 years design experience. 14 in Multi Family. Estimate, design, and engineer roof and floor truss systems for Multifamily, Commercial and Agricultural truss systems.

Prepare shop drawings for production.

Provide customer support, troubleshooting, and design solutions. Current software experience: MiTek, TJ Beam, Simpson, Word, Excel.WTCA certified.

Compensation: 50k Thom's Notes: Candidate scored in our Senior Designer range! Top 5% nationwide.

Perfect skills curve. No deficiencies.

Relocation: KS, TX, OK, CO, USA - Southwest, IA, LA, MO, NE, NM, ND, SD, AZ, USA - South, UT, USA Western, WY ID: C11016

Senior Designer/Outside Sales,Estimator - Truss/I-Joist/ EWP

20+ years experience as a Designer/Senior Designer. Primary duties: design, layout, optimization, and takeoff. Secondary duties: customer service and field measurements.

Software used: MiTek, OptiFrame, Alpine, AutoCAD, Soft Plan, Robbins. Component experience includes floor trusses, roof trusses, I-Joists, EWP, and hardware. Market experience includes single family custom, multi-family, and light commercial. My volume was varied depending on projects.

Also involved in Outside Sales.

Compensation: $48k+ JobLine Notes: JobLine Certified Senior Designer - Advanced Level Relocation: IL, IN, OK, TN, TX ID: C10536

@JobLine

Read/Subscribe online at www.componentadvertiser.com

Senior Designer/Design Manager/Outside Sales - I-Joist/ EWP/Glue Lam/Open Web

10 years EWP experience. Over saw all of the designs of EWP sold in the Dallas/ Fort Worth, Houston, San Antonio, Austin and South Texas region. Oversaw a team of 5 designers. Trade show experiences, Supported outside sales to close the deals.

Software: AutoCAD, BC Framer, TJ Beam, TrusPlus, Excel, I-Joist software.

In addition to "10 years experience w i t h Tr u s J o i s t s , B o i s e , L o u i s i a n a Pacific,Roseburg, TrusWal, GatorJoist and SpaceJoist, I have extensive knowledge of glulams. I have also trained others and checked other designer's work as a Design Manager roles." I also have outside sale experience, along with product knowledge to Builders and Code officials.

Compensation: $45-50k Relocation: KS, OK, TX ID: C11594

Designer/Design Manager Truss (wood & steel)

10 years experience. Assist design manager in everyday accountability for architectural and truss design department for a home builder / truss company. Train and assist beginning and junior designers with questions and design issues. Responsible for producing accurate construction and truss design drawings. Design and estimate wood roof and floor truss systems for multi-family, commercial, residential, and custom homes.

Work closely with architectural firms, engineering firms and general contractors to resolve issues and concerns of client or company. Job site inspection for code compliance. Service customer accounts on a daily basis. Products: Roof & floor trusses, wood & LGS, lumber and hardware.

Software: MiTek, Alpine, AutoCAD, Excel, Word Compensation: $50k+Relocation: TX, AR, FL, NC, OK, TN ID: C10723

Senior Designer/Design Manager - Truss/Panel/I-Joist/ EWP

20 years experience designing roof & floor trusses, wall panels, I-Joists, and EWP. Supervised 5 designers, customer service, optimizing, and quotes. MiTek, OptiFrame, Robbins, TJ Beam, Truswal and Microsoft Office.

Compensation: $60k+- opportunity JobLine certified Senior Designer, 5/5 overall ranking.

Relocation: USA - ALL States, AB, Canada - Western/Central, Canada Eastern ID: C11256

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget!

You Saw it in the

Adverti$er

January 20th, 2012 #05127 Page #29

Available candidates Design/Sales/Management - Truss/Panel/I-Joist/EWP/ Installed Sales

Single/Multi-Family Engineered Component Sales. Responsible for a sales region which covers the Southeastern areas of North Carolina and the Myrtle Beach area of South Carolina. I service singlefamily, multi-family, and commercial contractors. I also work with local building supply companies in order to provide them a link to component sales. I am responsible for making contact and then building and maintaining relationships with these contractors and building supply companies.

I am responsible for the estimating and preliminary design of all projects I come in contact with, utilizing the design software.

While developing relationships with the surrounding building supply companies and G.C.'s, I am able to provide engineered components, Wall panels and I-Joists/LVL's; all of which I have at least 10 years of design experience. With experience in almost all aspects of the Engineered Component industry, I've found that I truly excel within the Sales and/or Sales Management areas.

Relocation: AL, FL, GA, LA, SC, TN ID: C11728

Senior Designer/Design Manager - Truss/Panel

JobLine Certified Senior Designer (Top 2%). Candidate has 12 years industry experience and 12 years experience in this position. Products include floor trusses, roof trusses, wall panels, and hardware. Markets include tract, single family, custom, high end, and light commercial. Primary duties include design, layout, optimization, and cutting/production documents. Secondary duties include checking others work, customer service, training, and filling in for the Design Manager as needed. Software experience includes MiTek, Truswal, Comsoft/IBS, OptiFrame, GenericCAD, and TJ Expert. Training received includes WTCA Level 1, 2, 3, MiTek 20/20 & Engineering Principles..

Compensation desired: $70 to $75 Relocation: WI, IL, MN ID: C10019

Design Manager/Sr. Designer/ PE - Truss/Panel/EWP

30 year industry veteran, started as a Truss Designer, earned his way to Design Manager over 20+ designers. MiTek - Advanced, AutoCAD proficient. BSCE - PE. Compensation: Open??

Thom's Notes: PE with Mid Atlantic seals Relocation: USA - South ID: C10897

PHONE: 800-289-5627

Senior Estimator/Estimating Manager - Truss/Whole House/ Framing Package

6 years estimating experience. 4 with MiTek 20/20 and 2 with eFrame. Markets include Single Family Custom, Tract, Light Commercial and Multi Family.

Products include component framing packages and total project estimating.

Prepares hard construction estimates by means of manual and computerized takeoff methods. Extensive MiTek/Excel experience. Supervises monthly inventory audits for all truss department materials.

Maintains records for all received and processed quotes. Pre-engineers all plans for difficulty and profitability. Participates in cost studies to enure a correct labor and pricing strategy.

Compensation $50k+ Relocation: AL, FL, GA, MS, TN ID: C10580 General/Location/Regional Manager - Truss/Panel/EWP Currently has P&L responsibility for floor and roof truss plant mostly building tract and single family custom. Also distributes EWP. All departments report to the candidate with oversight by a corporate sales manager for the sales staff only. Has managed two shifts with 100 +/- employees at the $13,000,000 to $16,000,000 level. Prior industry experience includes EWP Division Manager, Technical Sales Representative, and EWP Designer.

Is also an experienced framer/framing foreman. Education: Associates degree. Has a working knowledge of, but is not currently proficient in AutoCAD, TJ Epert, MiTek 20/20 and eFrame.

Compensation: Negotiable.

Relocation: AL, CT, DE, GA, IN, KY, LA, ME, MD, MA, MI, MN, NH, NJ, NY, NC, OH, RI, SC, VT, WV, PA, TX, WI, USA - ALL States, AZ, CO, FL, IL, MT, NE, NV, VA, WA, DC ID: C10241

Senior (ACE) Designer/ Estimating/Outside Sales Truss/EWP

6 years experience: facilitated the truss sale, design, & delivery for lumber salesmen lacking truss experience. Developed own customer base by selling trusses. Design layouts of floor and roof truss systems for multifamily/commercial projects.

Proficient use of MiTek Engineering, eFrame, AutoCAD, TJBeam, and Excel programs. Compensation: $60's One of our top 1% ACE's Relocation: TX ID: C11427

Designer - Truss

30+ years truss design. Stable, MiTek, Roof & Floor Trusses.

Compensation: $45k+ Relocation: NC ID: C11692

General Manager - Truss/Panel/ Lumber/ Doors/Windows/ Cabinets/ EWP/I-Joists

Oversee all aspects of the manufacturing plant (made trusses, floor trusses and wall panels). HR— Shipping — Sales— Budget control — safety —- design — ordering. Did 2 start ups for this company and travel to many of their component plants to help get cost and budget under control.

Also work with redesigning the flow of some of these plants. My last year traveled to a lot of the plants to set up new policy for them. Areas of experience: Inventory control, ordering of raw goods, hiring and firing. Working with Sales, Engineering, and Converting, Shipping and Receiving along with working closely with the owners.

Running the plant --- the only thing I really don't get to involved with is sales --- the CEO handles the sales team.

Compensation: $80's Relocation: AL, AZ, CO, FL, GA, HI, IN, KY, MS, NM, NC, OH, SC, TN, TX, VA, WV ID: C11686

Senior Designer - Truss/Panel/ EWP/I-Joist/Framing Package

Candidate has 15 years industry experience, 4-5 years experience in this position, and 10 years in subordinate positions leading to this position. Products include floor trusses, roof trusses, wall panels, I-Joists, EWP, hardware, and complete framing packages.

Markets include tract, single family, single family custom, multi-family, and light commercial. Primary duties include design, layout, optimization, cutting/production documents, and takeoff. Secondary duties include checking others work, customer service, inside sales, software maintenance, network administration, training, and filling in for the Design Manager as needed. Software experience includes MiTek, Truswal, Comsoft/IBS, TJ Expert, AutoCAD, and I am willing to learn new software.

Compensation desired: $45k+. Motivating factors: advancement, compensation, benefits, job security.

Relocation: CA, CO, TN, WA ID: C10199

Designer/Design Manager Truss/I-Joist/EWP/Packages

35 years experience. Supervision of staff designers, training and coaching design team, checking work for accuracy, estimating and quote preparation, promoting sales with technical assistance, using Mitek software for advanced truss designing and Mitek MBA for creating and enhancing useful reports, using MS Word, MS Excell, MS Outlook, problem solving and field trouble shooting, communicating repair details.Compensation: $65k+ package Relocation: FL, GA ID: C11671

Read/Subscribe online at www.componentadvertiser.com

Senior Designer/Technical Outside Sales - Truss/Panel/ EWP/Installed Services

20 years Technical Sales & Design experience, 2 as Design Manager. Roof truss, floor truss, wall panels, EWP, component framing package, I-Joist and installed services experience. Current with MiTek 20/20, eFrame, TJ Expert, AutoCAD software. Single/multi family, light commercial, tract markets. Sold $5mm in truss and panels, provided estimates, designed plans, scheduling and customer service.

Compensation: Low $60's+ Relocation: TN ID: C10710

Senior Designer(JL) Truss/Multifamily

10+ years industry experience as senior truss designer. Software: 10 years Mitek, 1 year Truswal, MS Office, TJI Beam, Autocad Lt, Simpson, & USP. Primary duties: estimating, layout, engineering, & job costing of roof, floor, & ewp components. Secondary duties: checking others work, field visits, field measures, customer meetings, repairs, & customer service on a daily basis with contractors, engineers, architects, & builders to resolve design issues from project conception to completion.

Go to guy for complex commercial & residential applications. Associates Structural Engineering. WTCA Level III. Thom's Notes: JobLine Tested at Senior Designer Level 94% only used Jobber calculator.

Relocation: WI ID: C11282

Production Mgr/Supervisor Floor Truss/Wall Panel

Set up of work to production employees, batch, distribute, manage jobs to be cut and built for on time delivery.Perform weekly payroll, hire of new employees. set up and purchase lumber and other necessary stock for production. oversee maintenance of all equipment including the repair.

Compensation: $50's Relocation: IL, IN, IA, WI ID: C10942

New Candidates and more on www.thejobline.com W E A L S O H AV E WORK FROM HOME CONTRACT DESIGNERS available NOW! FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

January 20th, 2012 #05127 Page #30

Don’t Forget!

You Saw it in the

Adverti$er

Used Equipment Wanted!

888.288.9874

Omni Miser Saw Alpine AutoMill RS/SC/HP Saws Pacific Automation Auto Press 14 LT of 14 RT Ink Jet Printer for MiTek Cyber Saw or Auto Omni Saw Planx Ready Tables Triad “Diamond Quad” Framing Tables Triad Wall Panel Lift Viking Fastrac Portable Sheathing Bridge Triad Metal Framing Equipment Gooseneck Roll-Off Trailers Apollo Saws with Truss Automation Pacific Automation Auto-10 Truss Press Pacific Automation Raised Track Gantry Systems Planx or Wizard Jigging Systems Virtek Laser Projection Systems Field Repair Press Portable Bunk Cutter Mark-8 Truss Press Pacific Automation Ultra-Press 16

Toll Free: 800-382-0329 www.wasserman-associates.com

Join the Southern Pine Partnership!

Since 1915

Take Back Your Business Become More Competitive with:

  

Powerful Software High Quality Connector Plates Independent Established Supplier

All at a Great Price

For a software demonstration call 1-800-652-6050 www.keymark.com

Your Ad Could Be Here Free Advertising!

Trial period during the first quarter of 2012

Let us Earn Your Business!

As a member, your ideas help formulate programs and activities that benefit not only your company but the wellbeing of the entire industry

Contact Thomas McAnally at tmcanally@componentadvertiser.com or 800-289-5627 for details

2900 Indiana Ave. Kenner, LA. 70065 504/443-4464 sfpa.org southernpine.com mail@sfpa.org

Unmatched Quality • Engineered Design • Structurally Superior

Call 573.437.4848 for your FREE SAMPLE, or visit www.trimfitllc.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget!

You Saw it in the

Safety First!

Safety Meeting Topics From State Fund CA.

Safety and Substance Abuse Dont Mix Drug use and alcohol consumption are normally considered personal issues. They only become an employers concern when they affect safety and worker performance. Drug and alcohol abuse cost employers through high absenteeism and sick pay. Abusers hurt themselves and their families if they lose their job as a result of their actions. If they are fired or cannot function on the job, the company loses the services of an experienced worker.

Those under the influence of drugs or alcohol cause friction in the work group, lower morale and work efficiency, use poor judgment that results in bad decisions, and give the company a poor public image.

Certain times of the year individuals should be especially aware of their alcohol and drug consumption.

In the winter months when the days are dark and dreary, some people experience a sense of depression or seasonal affected disorder (SAD). They may turn to drugs or alcohol in the mistaken belief it will relieve the symptoms of the disorder.

January 20th, 2012 #05127 Page #31

Adverti$er La seguridad y la drogadicción o el alcoholismo no se mezclan

El uso de drogas y el consumo de alcohol se consideran generalmente asuntos de índole personal. Éstos solamente incumben al empleador cuando afectan la seguridad y el desempeño del trabajador. La drogadicción y el alcoholismo tienen un costo elevado para los empleadores por ser causas del ausentismo laboral elevado y de las ausencias por enfermedad con goce de salario. Los drogadictos y los alcohólicos se lastiman a sí mismos y a sus familias si pierden sus trabajos como resultado de sus acciones. Si se les despide o si no pueden desarrollar las funciones del trabajo, la empresa pierde los servicios de un trabajador con experiencia.

Aquéllos que se conducen bajo la influencia del alcohol o las drogas causan fricción en el grupo de trabajo, bajan la moral y la eficiencia en el trabajo, utilizan el mal juicio que resulta en malas decisiones, y dan una mala imagen pública a la empresa.

Durante algunas épocas del año, las personas deben estar especialmente conscientes de su consumo alcohólico y de drogas. Durante los meses de invierno, cuando los días son opacos y lúgubres, algunas personas padecen de algún tipo de depresión o de síndromes estacionales (SAD, por sus siglas en inglés). Ellos pueden optar por consumir drogas o alcohol con la falsa esperanza de que eso les aliviará los síntomas del trastorno.

La época de las fiestas de fin de año, con un mayor número de reuniones sociales o de mayor tensión nerviosa por problemas económicos, conduce a muchas personas a excederse en el uso de drogas o en el consumo de alcohol, especialmente este año de celebración del nuevo milenio. Todos aquellos que consumieron alcohol o drogas en exceso ayer, y tienen resaca hoy, pueden sentirse faltos de coordinación, aún tratando de recuperarse y quizá no le presten completa atención a los aspectos de seguridad que su trabajo requiere. Su juicio y desempeño seguro se verán seriamente disminuidos y aumentará la posibilidad de que ellos o sus compañeros de trabajo sufran accidentes o lesiones.

The holiday season, with increased social gatherings or added financial stress, leads some people to misuse drugs or alcohol, especially during this year of millennium celebration. Those who over-consumed alcohol or drugs yesterday and are hung over today may feel out of sorts, still trying to recover, and may not give all their attention to the safety aspects of their job. Their judgment and safety performance becomes Algunas veces los problemas personales o de salud persisten. En impaired and the likelihood of an accident or injury to themselves or la mayorìa de los casos, el problema se resuelve. Pero si no se resuelve, coworkers increases. algunas personas recurren al alcohol o a las drogas. Incluso algunos Sometimes a personal or health problem persists. In most cases, medicamentos recetados pueden interferir en el desempeño del trabajo. the problem gets resolved. But if it is not resolved some people turn to La persona no puede pensar claramente o se distrae. Esto puede llevar alcohol or drugs. Even some prescription drugs can interfere with job a accidentes. El consumo irresponsable de las drogas o del alcohol performance. The individual cannot think clearly or becomes distracted. no solamente pone en peligro la seguridad y la salud del trabajador This can lead to accidents. Irresponsible consumption of drugs or alcohol y sus compañeros, sino además, puede repercutir en las actividades not only jeopardizes the safety and health of the worker and coworkers empresariales del empleador y afectar el futuro de todas las familias but it can impact the employers business and affect the future of all involucradas. families involved.

The above evaluations and/or recommendations are for general guidance only and should not be relied upon for legal compliance purposes. They are based solely on the information provided to us and relate only to those conditions specifically discussed. We do not make any warranty, expressed or implied, that your workplace is safe or healthful or that it complies with all laws, regulations or standards.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

January 20th, 2012 #05127 Page #32

Don’t Forget!

You Saw it in the

Adverti$er

Business Listings

JobLine.com, inc.

The

800-289-JOBS

Truss Design | Wall Panel Design | Whole House Materials exclusively for MiTek 20/20 customers

www.componentrunner.com 314.374.7400 CDean@ComponentRunner.com If you are a supplier of building compopnent industry materials, equipment, or supplie, send us your business card and we will poste it free during the first quarter of 2012 send to Info@ComponentAdvertiser.com

J. Chip Dean PRESIDENT

Time To Hire?

We’re here when you need help!

www.thejobline.com

Bruce Mann

Wood Roof & Floor Trusses Wall Panels Engineered Components Gould Design, Inc. Christopher A. Gould -

Designing to your needs... One project at a time.

President

440 Spring Street, Marshfield, MA. 02050 phone: (314) 374-7400 email: CDean@ComponentRunner.com www.ComponentRunner.com

Manager

13540 East Boundary Road Building I, Suite 102 Midlothian, VA 23112-3943 brucemann.kbbp@gmail.com

CAD Design

Office: 804-744-7253 Fax: 804-744-7420 Cell: 804-304-7253 www.kb-bp.com

Designing to your needs... One project at a time

Reasons to consider utilizing GDI’s Design Services Design is custom fit to your individual standards Industry Leading Professionals at your fingertips

Is your Safety Program Working?

Overall design department cost reduced, saving you $$$ Experienced with multiple industry design software suites Up to date with US & Canadian Building Codes

(772) 475-3583 - Call Today

cgould@goulddesigninc.com | www.goulddesigninc.com

40+ consultations have demonstrated that companies can improve their bottom line through lean and TOC principles.

Time standards (R.E., S.U. Man-Minutes) for truss labor estimation are provided.

See what past clients are saying on web site. Payback less than 3 months.

The easiest and most inexpensive truss labor tracking program available!

No Pre-Scheduling of orders or employees Any order or shop employee can be logged into any workstation at any given time for maximum flexibility! ½ the normal pricing of plate providers’ truss labor tracking software cost. No Setup & Installation Fees. Use Existing Shop Computers.

Free, No Obligation 3-Month Trial Period www.todd-drummond.com Phone: 603-763-8857

PHONE: 800-289-5627

Leverage Our Extensive Experience to Gain:

Continual reduction in incident frequency & severity Sustained productivity, quality and customer relations Avoidance of regulatory costs, liability and risk Increased employee retention Strengthened business reputation

BIG PICTURE SAFETY, L.L.C. eXPeRIenCe ~ ReSULTS ~ SAVInGS

888.519.4130 CALL NOW! info@bigpicturesafety.com www.bigpicturesafety.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

PHONE: 800-289-5627

Don’t Forget!

You Saw it in the

Adverti$er

Read/Subscribe online at www.componentadvertiser.com

January 20th, 2012 #05127 Page #33

FAX: 800-524-4982