– Forging a Global Hub for Connectivity and Innovation
CFM Participates in 2025 Manufacturing Expo – Supporting Chinese Fastener Industry's Expansion in Southeast Asia
CFM Revisits Manufacturing World Tokyo: International Opportunities and Challenges for Chinese Fastener Enterprises
CFM Post-Show Review: How to Tap into South Asia's Largest Fastener Market?
CFM at Vietnam Manufacturing Expo - Competition and Opportunities in the Vietnamese Market
2025-2026 Fastener Exhibitions
CHINFAST：
Excellence in Transformation from Manufacturing to Service Innovation
CHINFAST Co., Ltd. (hereinafter "CHINFAST") has been committed to the research, development, manufacturing, and sales of fastener products since its inception. As one of the leading enterprises in Chinese fastener industry, CHINFAST has cultivated a strong international reputation by superior product quality, innovative service models, and global market layout. Looking back on its development history, CHINFAST has not only excelled in product manufacturing but also successfully expanded into DIY packaging services, demonstrating its keen market insight and strong execution ability through strategic transformation.
Strategic Transformation:
From Manufacturing to Service
CHINFAST initially focused on manufacturing multi-functional wood screws and decking screws. With excellent product quality and high-efficiency production capabilities, it quickly secured a competitive edge in the fastener industry. However, as market demands became more diversified and customers' service requirements increased, CHINFAST realized that relying solely on manufacturing operations would no longer meet customers' comprehensive needs. The company embarked on a strategic expansion into DIY packaging service area as early as five years ago.
This strategic transformation decision was not
accidental but was based on a deep understanding of market trends and accurate analysis of customer preferences for smallbatch, tailored packaging solutions. CHINFAST keenly captured this market opportunity and laid a solid foundation for the smooth development of the DIY packaging service through a series of hardware and software upgrades, including an automated warehouse, a professional accessory design team, and a state-of-the-art packaging production line. Meanwhile, the integrated ERP system further improved production efficiency, enabling the efficient operation of the DIY packaging service. These enhancements not only elevated CHINFAST's service capabilities but also provided customers with more flexible and efficient solutions.
Competitive Edge: DIY Packaging Service
CHINFAST's DIY packaging service stands out by robust technical infrastructure and an experienced team. The company, relying on the cost advantage from industrial-scale manufacturing, offers customers highly competitive packaging solutions. Whether it is product quality, outer packaging design, or delivery timelines, CHINFAST strives for excellence and ensures full customer satisfaction.
In terms of customized services, CHINFAST has demonstrated outstanding innovation capabilities. For example, a European customer originally purchased bulk goods and packaged them independently. After learning about
CHINFAST's DIY packaging service, the customer placed a trial order for one container. The CHINFAST team not only optimized the product structure and packaging process for the customer but also invited the customer to visit the automated packaging process on-site. The customer was full of praise for CHINFAST's highly efficient automated operation level and professional packaging team and immediately decided to entrust all DIY businesses to CHINFAST - a testament to the company's commitment to innovation and customer-centricity.
Future Opportunities:
Deeply Plowing the Carbon Steel and Stainless Steel Fasteners
CHINFAST has been consistently dedicating full efforts to the R&D of new fastener products. Over the coming years, CHINFAST intends to enhance the high-end carbon steel fasteners and stainless steel fasteners as one of its advancement paths, aiming to help customers achieve a more efficient user experience. The company believes that through continuous innovation and technological upgrades, it can meet the market's demand for high-quality fasteners and assist customers in standing out in the market competition with better fastener solutions.
Conclusion
CHINFAST has become a benchmark enterprise in Chinese fastener industry with its excellent product quality and innovative service models. The strategic transformation from manufacturing to service not only demonstrates CHINFAST's keen market insight but also lays a solid foundation for its future sustainable development. In the future journey, CHINFAST will continue to be customer-centered and innovation-driven, forging ahead in the fastener industry.
CFM COLLECTED NEWS
Major Events in the Fastener Industry in the First Half of 2025
In the third quarter of 2025, the fastener industry was impacted by tariff changes, and global trade was fraught with uncertainties. Amid these conditions, Chinese enterprises actively expanded their presence in overseas markets, leading enterprises formed alliances, industry leaders welcomed new leadership, and transnational exchanges yielded remarkable results. The global fastener industry is showcasing a resilient and upward stance amid adversity. Here’s a recap of the key developments.
EU Makes Preliminary Anti-Dumping Ruling on Screws Without Heads from China
The European Commission issued a notice, making an affirmative preliminary anti-dumping ruling against screws without heads originating from China, with the provisional duties set between 62.3% to 80.7% on June 16.
The dumping investigation period of this case is from July 1, 2023 to June 30, 2024, and the injury investigation period is from January 1, 2021 to the end of the dumping investigation period.
Nord-Lock Group Successfully Acquires High-End Professional Bolt Company Energy Bolting
The Nord-Lock Group announced that through the acquisition of Energy Bolting, a high-end professional bolt company, it will next offer unparalleled value to customers through this initiative.
Benefiting from the Nord-Lock Group's strong global business coverage and significant influence in highly demanding industries, this acquisition makes it easier for manufacturers to find customized bolting solutions for safetycritical applications.
Jiangsu Zhenjiang Expand into New Energy Market in the Middle East
Jiangsu Zhenjiang New Energy Equipment Co., Ltd., on June 17, issued an announcement stating that the company plans to establish a thirdtier overseas subsidiary, DTF (HK) Holding Limited, in Hong Kong, China, through its second-level subsidiary Suzhou Dtflock Precision Fastener Co., Ltd., with a total investment of USD 5 million using its own capital.
Meanwhile, in order to meet the growing demand for photovoltaic fasteners in Saudi Arabia's new energy market and cope with the tariff barriers in Europe and the United States, it is planned to establish an overseas fourthtier subsidiary, DTF Lock Fastener Arabian LLC, in Saudi Arabia with its own capital
through the newly established DTF (Hong Kong) Holdings Limited. The total investment amounts to 18.75 million Saudi Riyals, approximately 35.81 million RMB.
Finework's Two Significant Strides in International Development
On June 18, 2025, at the Paris Air Show, Chinese listed company Finework signed a strategic framework agreement with Heggemann, a renowned German aviation component manufacturer for a joint venture project.
On July 6, Mr. Awab Alsharif, Head of the Energy Sector at the Public Investment Fund (PIF) of Saudi Arabia, visited Finework. Both parties held in-depth discussions on Finework's investment in and establishment of a factory in Saudi Arabia as well as localized cooperation.
Ed Smith Elected as NFDA Chairman for
2025-2026
Ed Smith from Würth Industry USA was elected as the Chairman of the National Fastener Distributors Association (NFDA) for the 2025-2026 term. Melissa Patel from Field will serve as Vice Chairman, Christian Reich from Goebel Fasteners will continue as Assistant Vice Chairman, and Scott McDaniel from Martin Fastening Solutions will remain on the board of directors as former chairman.
2025 Screw Night and "Golden Screw Award" Ceremony
Successfully Held in Shanghai
On June 18, 2025, the 2025 Screw Night and "Golden Screw Award" Ceremony, co-hosted by CFM and Fastener Expo Shanghai (FES), was grandly held in Shanghai, China. As a grand event in China's fastener industry, it gathered more than 600 industry professionals, including representatives from various national commercial associations, industry experts, scholars, and participating enterprises.
Companies such as Ningbo Haixing Plastic Machinery Manufacturing Co., Ltd., Guangdong STL Fastening System Co., Ltd., Keruineil Machinery Equipment Co., Ltd., Dongguan Donglong Metal Mold Machinery Co., Ltd., New Dexin Stainless Steel (Zhejiang) Co., Ltd., Dongguan RKE Intelligent Technology Co., Ltd., Fangsheng Intelligent Technology (Shanghai) Co., Ltd., Zhejiang Excellent Industries Co., Ltd., Jiangsu Yanzhan Intelligent Technology Co., Ltd., etc., won the 2025 Golden Screw Award.
1st National Fastener Distributors Conference Successfully Held in Shanghai
The 1st National Fastener Distributors Conference, co-initiated by Yang Junfeng (Chairman of CFM), Zhu Zhiqiang (Founder of Dianjiang Consulting), and Hui Ge (a renowned industry influencer focusing on fastener insights), and undertaken by CFM, was successfully held on June 18 in Shanghai, China.
With the theme of "Winning in Cognition, Breaking Barriers to Win", the conference invited nearly 200 representatives, including fastener distributors from 50 large and medium-sized cities across China and representatives from leading manufacturing enterprises in the fastener industry, who embarked on a journey of in-depth intellectual exchange and collaborative brainstorming.
Delegation from the Fasteners Association of India Visits Chinese Fastener Equipment Factories
Adelegation consisting of 14 member enterprises of the Fasteners Association of India, led by Abhijat Sanghvi, President of the Fasteners
Association of India and Managing Director of Sang Fasteners Pvt. Ltd., and accompanied by CFM, visited Sijin Intelligent Forming Machinery Co., Ltd., Ningbo Sijin Benniu Machinery Co., Ltd., and Yongjin Smart Devices (Ningbo) Co., Ltd. on the morning of June 19, 2025.
Australia Initiates Anti-Dumping
and Countervailing Investigations Into Chinese Light Gauge Steel Studs and Tracks
The Australian Anti-Dumping Commission, on June 30, issued Announcement No. 2025/053, stating that in response to an application filed by domestic construction enterprise Rondo Building Services Pty Ltd, it will initiate anti-dumping and countervailing investigations into light gauge steel studs and tracks imported from China. The dumping investigation period is from April 1, 2024, to March 31, 2025.
Stanley Black & Decker Announces CEO Succession Plan
On June 30, Stanley Black & Decker (SWK) announced that Christopher Nelson, current Chief Operating Officer, will assume the role of CEO effective October 1, 2025.
Mr. Nelson expressed great enthusiasm for the opportunities ahead, stating that he looks forward to working hand in hand with the Board of Directors and the global team to fully unlock the tremendous potential of Stanley Black & Decker's brand innovation in the market.
China's Steel Exports Break Through Trade Barriers to Hit a New High, Exceeding 30.7 Million Tons in the Second Quarter
In the second quarter of 2025, China's steel exports hit a new high of 30.7 million tons, an 11% increase compared with the same period last year, surpassing the export peak a decade ago. In the first half of 2025, the total steel exports increased by 9% compared with last year, becoming a key pillar amid weak domestic demand. Exports of semi-finished steel products surged by more than 300% in the first five months of this year. Research institutions predict that China's steel exports will reach 125 million tons in 2025, and that trade defense measures will have limited impact on restricting exports. China's steel output remains at over 1 billion tons annually, and exports have become a major driving force for stable growth.
US Announces New Global Tariffs
On July 31 (local time), U.S. President Donald Trump signed an executive order, setting the rates of "reciprocal tariffs" to be imposed on multiple countries and regions, with specific rates ranging from 10% to 41%. The new tariffs officially took effect on August 7th.
The executive order specifies the following:
·Syria - 41%
·Myanmar, Laos - 40%
·Switzerland - 39%
·Algeria - 30%
·India - 25%
·Vietnam - 20%
·Philippines, Thailand, Cambodia - 19%
·Brazil, the United Kingdom - 10%
·Most countries and regions are subject to a 15% tariff rate, including Japan, South Korea, Israel, and Turkey.
·EU countries: For EU countries, if the current tariff on goods is lower than 15%, it will be raised to 15%; no additional tariffs will be imposed if the current rate is higher than 15%.
·Canada: The tariff rate on Canada has been increased from 25% to 35%, which took effect on August 1st.
·Mexico: Mexico will continue to pay a 25% tariff on fentanyl, a 25% tariff on automobiles, and a 50% tariff on steel, aluminum, and copper.
Countries not listed will uniformly apply a 10% tariff rate.
If any country or region evades tariffs through transshipment via a third country or region, its commodities will be subject to a 40% transshipment tax.
Australia Terminates Anti-Subsidy Investigation into China's Interchangeable Bolted Clipping System Clip Heads
On August 11, 2025, the Australian Anti-Dumping Commission (ADC) issued Announcement No. 2025/075, stating that in view of the negligible subsidy margins of interchangeable bolted clipping system clip heads exported to Australia by Chinese exporter Ningbo Fenghui Metal Products Co., Ltd. and other Chinese exporters, it therefore terminated the anti-subsidy investigation into China's interchangeable bolted clipping system clip heads.
Bulten Reports Stable Q2
Bulten Group has reported net sales amounted to SEK 1.337 billion (€119.8 million) for the second quarter of 2025, a decrease of 8.8% on the same period the previous year (Q2 of 2024: SEK 1.466 billion). Operating earnings totalled SEK 61 million, equating to an operating margin of 4.6% – with restructuring costs of approximately SEK 8 million having a negative impact on operating earnings.
Bulten Group is a leading global manufacturer and distributor of fasteners to the automotive industry, as well as other industries – such as consumer electronics. Headquartered in Gothenburg, Sweden, the company has approximately 1,900 employees around the world.
Axel Berntsson, president and CEO at Bulten Group, reports: "Our Q2 results were in-line with both the previous year and the previous quarter. Sales to segments, such as medtech and consumer electronics were strong, while volumes for light vehicles fell slightly as a result of the downturn in the automotive sector."
In June, Bulten also decided to initiate a strategic review of which products should be manufactured in-house versus externally sourced in the future, as well as how the company should be organised. The review includes an assessment of the potential consequences of consolidating and/or divesting one or more of the Group's manufacturing facilities.
Provisional Anti-Dumping Duties on Chinese Headless Screws
The European Commission has published its regulation applying anti-dumping duties on screws without heads, originating in the People's Republic of China, with a range from 62.3% to 80.7%. The regulation came into force on Tuesday 17th June and applies to imports of the product concerned into the EU from that date.
According to the definition of the product concerned in Article 1, Section 2 of the regulation, the provisional anti-dumping duty is imposed on imports of screws and bolts, whether or not with their nuts and washers, without heads, of iron or steel other than stainless steel, regardless of tensile strength, excluding coach screws and other woodscrews, screw hooks and screw rings, self-tapping screws, and screws and bolts for fixing railway track construction material, currently falling under CN codes 7318 15 42 and 7318 15 48 and originating in PR China.
The full text of the regulation can be found here: https:// eur-lex.europa.eu/legal-content/EN/TXT/?uri=OJ:L_202501189
EU Commission reviews Chinese cooperating exporting procedures
The British and Irish Association of Fastener Distributors (BIAFD) has also reported that the EU Commission is currently assessing the Chinese cooperating exporting producers subject
to the reduced provisional anti-dumping duty rate of 67.4% on imports of headless screws, including threaded rods, from the People's Republic of China. These companies are listed in the Annex of the Commission's Implementing Regulation.
The applicant, the European Industrial Fasteners Institute (EIFI), has expressed concerns that many of the listed entities may not actually be manufacturers of the specified product, but rather traders or producers of different goods. As a result, the Commission asked the relevant Chinese companies to provide both the original and an English translation of their articles of association and business licence by 26th June 2025.
EU importers should be aware that the Commission may conclude, following its investigation, that not all the companies currently benefiting from the reduced provisional duty rate meet the criteria for doing so. This means that, as a result of the investigation procedure, the duty rates for certain suppliers may be amended, with the consequence that the (higher) general duty rate will apply to certain companies.
A Mood of Cautious Optimism
Würth Group's preliminary figures for the first half of 2025 indicate a slight trend towards a return to growth. In the first half of 2025, Würth Group was able to increase its consolidated sales by 2.2% to €10.4 billion (adjusted for currency effects, growth was 2.7%), while generating an operating result of €475 million.
Overall, Würth Group reports that the business climate appears to be improving slightly, despite the erratic US economic policy. The number of orders the Group received over the past few weeks points to an acceleration in growth in the second half of 2025.
For now, Würth Group is entering the coming months with cautious optimism. Measures taken by Germany's newly elected federal government are fostering a sense of optimism in the national economy, which could quickly replace the previous pessimism and dissatisfaction among the population.
BUMAX Announces Strategic Partnership with Leading Turkish Distributor
Swedish premium fastener manufacturer BUMAX has strengthened its market presence in Türkiye, following the signing of a new strategic agreement with Standart Civata (STD) – a renowned distributor of high-quality fasteners.
The partnership marks a significant milestone in the BUMAX international growth strategy, aimed at strengthening its distribution network and brand presence in key markets. "We are thrilled to partner with Standart Civata, a company that shares our commitment to quality and customer satisfaction," states Jacob Bergström, regional sales manager at BUMAX. "This collaboration will enable us to better serve our Turkish customers and expand our footprint in this important market."
Kuntay Ayberkin, general manager of Standart Civata, adds: "BUMAX's premium stainless steel fasteners are a perfect fit for the Turkish market, and we are excited to work together to bring these high performance products to our customers. The technical training and local support provided by BUMAX will be invaluable in ensuring the success of this partnership."
BUMAX recently held an in-depth training session for the Standart
Civata team in Izmir, Türkiye, to raise awareness of the unique characteristics and capabilities of BUMAX fasteners. This included a deep dive into the full range of BUMAX grades and products, and how they can overcome particular customer challenges by providing properties, such as high strength, corrosion resistance, anti-galling and temperature resistance.
Leading Turkish distributor
Founded in 1982, Standart Civata operates as part of Norm Holding – Türkiye's market leader in fasteners, hardware and customised fastening solutions. With a trade-focused model and a dedicated team of over 160 experts, Standart Civata is committed to delivering top tier service and product quality. With more than 45,000 pallets of capacity in its sales and logistics centres and 15,000 tonnes of inventory spread across strategic hubs in Izmir, Manisa, Kocaeli, and Ankara, Standart Civata ensures fast delivery to all provinces of Türkiye and exports to over 50 countries worldwide. Its logistics operations are supported by its own fleet and third-party warehouse and distribution partners.
Fontana Gruppo Acquires MNP Corporation
Just a few months after announcing the acquisition of Right Tight Fasteners, a key player in the Indian market, Italian-based Fontana Gruppo is continuing its growth strategy with the acquisition of US-based MNP Corporation, a company specialised in the design and production of fasteners for the automotive, earthmoving and agricultural sectors.
Giuseppe Fontana, CEO at Fontana Gruppo, outlines: "We are continuing our strategy of expanding into the local markets served by our customers, who demand timely and efficient service. Thanks to this acquisition, we will be able to significantly increase our production capacity while maintaining our high-quality standards, becoming the largest fasteners manufacturer in North America and worldwide."
Giuseppe continues: "With strong roots in Italy, we have always pursued a localisation strategy that allows us to seize opportunities on every continent, keeping our minds and eyes
open to the world. In this regard, the United States, where we have had a presence for many years, continues to represent a strong market."
Founded by Larry Berman and headquartered in Utica, Michigan, MNP Corporation is a leading manufacturer in the fastener industry. Today, it employs 1,000 people and operates five production facilities in Michigan and Illinois. Terri Chapman, CEO at MNP Corporation, states: "This company has been my family's legacy since 1970, and I’m proud to pass it on at a time of strength, with confidence in its future."
Effects of Domestic Producer Price Index on the Fastener Industry
Annual changes in the four sectors of industry were mining by 28.30%, manufacturing by 24.02%, electricity, gas generation and distribution by 22.10% and water supply by 55.74%.
Annual changes in main industrial groups were increased by 21.91% for intermediate goods, increased by 31.35% for durable consumer goods, increased by 26.40% for non-durable consumer goods, increased by 20.82% for energy, increased by 28.34% for capital goods, monthly.
Reflections on the Fastener Industry
Cost pressure: Steel-based fasteners are directly affected by cost increases in the manufacturing industry. The annual producer price increase of close to 24% requires companies to develop more careful strategies in the supply of intermediate goods and capital investments.
Supply chain effect: The high increase in both intermediate goods and capital goods can drive up the costs of raw materials and spare parts used in production. Need for price adjustments: The rising cost trend of durable and non-durable consumer goods may necessitate the reflection of price increases in final products. Sustainability and competition: In order to maintain competitiveness in the domestic market and exports, it is important for manufacturers to invest in areas such as efficiency, coating technologies and automation.
Result
TurkStat's July 2025 data show that the upward trend in producer prices creates a strong cost pressure in the fastener sector. In particular, the 24% annual increase in the manufacturing sector will force companies to review their price strategies and turn to efficiency-oriented improvements.
June Report of Turkiye's Steel Industry
STEEL PRODUCTION
In June 2025, Turkey's crude steel production decreased by 3.5% compared to the same month last year, to 2.9 million tons.
In the first half of the year, production decreased by 1.7% to 18.3 million tons.
STEEL CONSUMPTION
Final product consumption was 3.1 million tons in June 2025, an increase of 8.8% compared to the same month of 2024.
In the first half of the year, final product consumption decreased by 2.6% to 18.6 million tons.
FOREIGN TRADE
Export
In June 2025, exports of steel products increased by 21.5% in terms of quantity to 1.4 million tons and by 13.5% in terms of value to 931.3 million dollars compared to the same month of 2024.
In the January-June period, exports of steel products increased by 18.6% in terms of quantity to 7.7 million tons and by 8.8% in terms of value to 5.2 billion dollars compared to the same period of 2024.
Import
In June 2025, imports of steel products increased by 52.4%
in terms of quantity to 1.8 million tons and by 28.7% in terms of value to 1.2 billion dollars compared to the same month of 2024.
In the January-June period, imports of steel products increased by 12.6% in terms of quantity to 9.3 million tons and decreased by 0.3% in terms of value to 6.5 billion dollars compared to the same period of 2024.
Foreign Trade Balance
Although the ratio of exports to imports, which was 73.5% in the January-June period of 2024, increased to 80.2% in the same period of 2025 thanks to the upward trend in exports, this ratio lagged behind 83.4% in the 4-month period due to the high rate of increase in June imports.
WORLD STEEL PRODUCTION
According to the June 2025 data announced by the World Steel Association (worldsteel), world crude steel production decreased by 5.8% compared to the same month of the previous year to 151.4 million tons, and in the January-June period, it decreased by 2.2% compared to the previous period to 934.3 million tons.
In the January-June period, China's crude steel production decreased by 3% compared to the same period of the previous year and amounted to 514.8 million tons. India's crude steel production, which ranks second, increased by 9.2% to 80.9 million tons, while Japan's production decreased by 5% to 40.5 million tons.
Türkiye's Automotive Sector July Results
In the January-July period of 2025, total production increased by 1 percent compared to the same period of the previous year, while automobile production decreased by 4 percent. In this period, total production was 834 thousand 838 units and automobile production was 521 thousand 447 units.
In the January-July period of 2025, the total market increased by 6 percent compared to the same period of the previous year and amounted to 739 thousand 903 units. In this period, the automobile market increased by 7 percent and amounted to 572 thousand 198 units.
In the commercial vehicle group, in the January-July period of 2025, total commercial vehicle production increased by 11 percent and light commercial vehicle group production increased by 14 percent compared to the previous year, while heavy commercial vehicle group production decreased by 9 percent. Compared to the January-July period, the commercial
vehicle market increased by 3 percent, the light commercial vehicle market increased by 6 percent, while the heavy commercial vehicle market decreased by 8 percent.
In the January-July period of 2025, compared to the same month of the previous year, total automotive exports increased by 9 percent on a unit basis, while automobile exports decreased by 5 percent. In this period, total automotive exports amounted to 630 thousand 992 units and automobile exports amounted to 361 thousand 36 units.
In the same period of 2025, total automotive exports increased by 14 percent in dollar terms compared to the same month of the previous year. According to the data of Uluda Automotive Industry Exporters' Association (OIB), total automotive exports amounted to $ 23.5 billion in this period, while automobile exports increased by 12 percent and amounted to $ 6.9 billion.
2025 TEMMUZ Ayı Özeti
2025 July Summary
by Alexander Ostashov, Chief Editor of "Fasteners, Adhesives, Tools
and…" Magazine, www.fastinfo.ru
Tech-KREP Opens an Engineering Direction Europartner Shares Experience
General Director of Tech-KREP Dmitry Markov presented a new strategic step of the company –the creation of the Tech-KREP Engineering direction.
"We are responding to market demand: professionals need not just high-quality fasteners or tools, but full-fledged technical solutions. We will be engaged in design, technical calculations, modeling and selection of optimal fastening systems for objects of varying complexity. The key areas of our work cover the most popular areas of application of engineering fasteners, including: solutions for pipeline systems, for ventilation systems, for roofing systems.
We have developed a full-fledged ecosystem of products for the implementation of engineering solutions of any complexity. The strategic goal is to become a leading expert center in the field of engineering fastening solutions in Russia with the prospect of entering the international market of engineering services."
The Europartner fastener plant shared its experience in contract manufacturing and in the release of new products at the PlastForum forum of the Rosplast exhibition. Europartner is one of the few Russian fastener manufacturers open to sharing experience. On June 19, at the open conference platform PlastForum, Europartner took part in the session "Contract manufacturing: from idea to series in the polymer industry". As part of the report by plant specialist Sergey Pavlov, the company's experience in contract manufacturing was presented and how to avoid mistakes when launching the production of a new product was discussed.
Europartner is constantly expanding its range of products. Among the new products are PNDS F dowels for through mounting, which are currently equipped with high-strength screws.
Provided
The High-Strength Fasteners Plant "BERVEL"
Announced the Launch of a New Service for Clients - "Fastener Installers School"
The main objective of this project is to help construction organizations correctly organize the process of working with high-strength fasteners at construction sites, including acceptance, quality control, storage, preparation and installation.
Most problematic situations that arise with high-strength bolt kits are associated with insufficient awareness of installation teams when working with high-strength fasteners. In order to prevent these problems, increase the level of professionalism in the field of installation of metal structures and close all sorts of issues related to the use of high-strength fasteners at installation sites, the ZVK "BERVEL" team has developed a training course "Fastener Installers School".
In addition, the team of OOO ZVK "BERVEL" provides full support at the stage of preparation and installation of connections on high-strength bolts with controlled tension.
Moscow Region Manufacturer of Hardware and Other Components for Radio Electronics to Double Capacity
The company "New Technologies and Materials" from Sergiev Posad, Moscow Region, plans to double its production capacity. This was announced at the exhibition
"Innoprom-2025" by the company's CEO Alexander Karpenko. Large-scale modernization will start this year.
"The production expansion program provides for a twofold increase in the number of employees, the introduction of new technological lines and the modernization of equipment. This will create hundreds of new jobs and increase the production capacity of the enterprise by 1.8 times", - Karpenko explained.
At the international industrial exhibition "Innoprom-2025", the company presented components for drones, a new generation of hardware for mechanical engineering and much more.
"New Technologies and Materials" is a high-tech enterprise that is part of the structure of JSC "Concern VKO "AlmazAntey". It produces special ceramics and ferrites, fasteners and medical products, is engaged in mechanical processing and metalworking.
Japanese Company Makita Has Returned to the Russian Market
Makita, which reduced its supplies to the Russian Federation after February 2022, has begun to increase their imports into the country. By the autumn of this year, the manufacturer intends to restore part of the withdrawn assortment through direct deliveries. The manufacturer has already restored activity in social networks, and also created an online showcase on the Ozon marketplace.
Makita did not officially leave the Russian market, but due to logistics problems, the company reduced imports, ultimately reducing its share in the Russian Federation from 20% to 1.5%. And since the summer of 2024, Makita products have been entering the Russian market through parallel imports. Experts believe that it will not be easy for the company to regain its previous position in the market. To do this, it will have to resume warranty service, official deliveries and investments in marketing support.
The Russian Autumn Exhibitions Where Fasteners Will Be Presented
Several Russian exhibitions that will be held in the fall have announced the topic of fasteners. The fasteners will be presented at the exhibitions: FastTec, Fastenex, MITEX, Metal-Expo.
The exhibitions FastTec, Fastenex, MITEX will be held in Moscow. A new platform for fasteners "MITEX Fasteners" will be organized at the MITEX exhibition.
This year the exhibition Metal Expo will take place in St. Petersburg from 11 to 24 of November.
From China to the World - How SRC Forged a Global Footprint with Annual Capacity Up to 6 Billion Rivets
Special Rivets Corp. (hereinafter "SRC") has been focused on R&D, production and sales of a full range of rivets since 1983. Its product types include highstrength structural rivets, open-end rivets, closed-end rivets, multigrip rivets, large flange rivets, as well as round-head or countersunk-head rivets. SRC's full range of rivets complies with international standards and specifications, is compatible with various manual or pneumatic tools, and features easy operation. They are widely used in riveting applications such as construction, automotive, shipbuilding, aviation, machinery, and electrical appliances.
From Sales Agent to Well-Known Asian Manufacturer
SRC started by acting as an agent for rivets and riveting tools of well-known overseas enterprises. After gaining a thorough understanding of the industry and accumulating
a certain amount of capital, it resolutely established its first factory in the Taichung Industrial Zone of Taiwan, China in 1983, officially transforming from an agent sales enterprise into an integrated manufacturing factory covering both production and sales.
Entering the 21st century, mainland China ushered in an opportunity for rapid economic development. In 2000, SRC invested in and established its first factory in mainland China - SRC Metal (Shanghai) Co., Ltd., which covers an area of 20,000 square meters and has two modern workshops.
Figure 1. SRC Metal (Jiashan) Co., Ltd.
With the acceleration of the company's development pace, in 2003, SRC established its second production factory in mainland China - SRC Metal (Jiashan) Co., Ltd.in the Jiashan Economic and Technological Development Zone of Zhejiang Province, and has successively built three new production workshops. After the full completion and commissioning of the new Jiashan factory, the total production capacity increased by 60%, and the factory has obtained ISO9001 certification, achieving a dual improvement in both output and quality.
In 2023, when SRC celebrated its 40th anniversary, its new factory located in Chonburi Province, eastern Thailand - Apex International (Thailand) Co., Ltd. - was also completed and put into production simultaneously. The new Thai factory is a crucial measure for SRC's development in Southeast Asia and global expansion. Covering an area of 14,000 square meters, the factory has introduced a full-chain of rivet production equipment. Apex has ISO9001 and IATF16949 certifications. SRC can produce up to 6 billion rivets and 2 million sets of various tools annually.
Navigating the Global Market with Brand Recognition
In the field of rivet products, the sales volume of Asian manufacturers is often lower than that of well-known European and American enterprises. One of the most important reasons is that global customers have higher brand
recognition of European and American products than of Asian manufacturers.
As an export-oriented production enterprise, SRC has regarded brand promotion as a powerful tool to enter the market since the brand was established. Its presence can be seen in international exhibitions, industry publications and media platforms, through which it has built up customers' recognition of the SRC brand. Nowadays, the SRC brand has gained considerable popularity in the global market.
At the commissioning ceremony of the Thai factory, Zhang Yizai, Chairman of SRC, once stated: "Since its establishment, SRC has been aiming at the global market, cooperating with global manufacturers to create win-win results. With the continuous deepening of global cooperation, more than 40 years of professional production experience and the globally renowned SRC brand will become the twofold assurance for SRC to explore the market."
In today's world where global tariff policies are volatile, SRC still maintains a positive and optimistic attitude, continuously upgrading its technology, improving its services, and fully adhering to the corporate management philosophy of "not advancing is regressing", so as to continuously expand its global footprint.
Figure 2. Apex International (Thailand) Co., Ltd.
Figure 3. SRC Participating in Fastener Fair Global 2025
Figure 4. Zhang Yizai, Chairman of SRC
Half a Century of Precision Craftsmanship: Forging a Benchmark in the Global Fastener Die Industry
Introduction
Within the global landscape of the fastener die industry, one enterprise, tempered by half a century of challenges, consistently occupies a pivotal position. Originating in Taiwan, China and cultivating the mainland China market for over two decades, it has become a standout player renowned for its exquisite craftsmanship, leading technology, and global footprint. Today, we are honored to invite Ms. Hsu Yating, General Manager of Haiyan Jieng Beeing Metal Products Co., Ltd. (hereinafter "Jieng Beeing"), to explore this integrated R&D and manufacturing high-tech enterprise. We delve into the secrets behind its enduring success in the fastener die sector and examine the forward-looking vision and strategic resolve it demonstrates amidst industry transformation.
Half a Century of Dedication to Excellence
As a world-renowned exclusive manufacturer in the fastener industry, Jieng Beeing's core products encompass
punches and various forming dies. Its technological edge within the industry was certainly not achieved overnight. Ms. Hsu explained that since its establishment in 1973, the Jieng Beeing Group has traversed over five decades, with more than 20 years dedicated to the mainland China market. Operating production bases in both Zhejiang and Guangdong provinces, the company specializes in manufacturing precision stamping dies, thread rolling dies, and high-strength precision fastener dies.Discussing specific process and patented technological advantages, Ms. Hsu stated: "Throughout its journey, Jieng Beeing has consistently drawn inspiration from international world-class technology. We have gradually introduced grinding machines from Germany and heat treatment equipment from France and Poland. In recent years, the fiveaxis milling machine jointly developed by our Taiwan, China headquarters and academic institutions has significantly enhanced the stability and precision of our dies." Leveraging these advanced machines and a robust R&D team, Jieng Beeing has secured multiple internationally authorized patents, including CONTI, Mathread, and TENZ.
- An Interview with Ms. Hsu Yating, General Manager of Haiyan Jieng Beeing Metal Products Co., Ltd.
Technological accumulation stems from continuous investment and exploration. Ms. Hsu emphasized: "We don't just supply products; we provide services. Because we deeply understand our customers' needs, we are willing to grow alongside them, offering customized solutions." It is precisely this customer-centric philosophy that propels Jieng Beeing forward on its technological path.
Precision Inspection and Full-Process Traceability
The fastener die industry demands extremely high product precision, where the slightest deviation can impact the performance and safety of the final product. Jieng Beeing maintains a rigorous quality control system to meet this demand. Ms. Hsu stated that Jieng Beeing products strictly adhere to the ISO9001 international standard, laying a solid foundation for quality.
Regarding inspection equipment, beyond standard profile projectors, hardness testers, roughness testers, and spectrometers, the company has also introduced precision inspection instruments such as Japan's Mitutoyo and KEYENCE, demonstrating its relentless pursuit of product quality excellence.
To achieve full-process quality traceability, Jieng Beeing has established a comprehensive production history database. "Every batch of products is tracked via an ERP work order number recording the manufacturing process. Detailed production histories are meticulously documented in the database, ensuring product quality is fully traceable," Ms. Hsu added.
Technological Differentiation
Faced with emerging competitors in the die market, Jieng Beeing possesses unique core competencies. "Jieng Beeing leads the industry in the field of high-strength bolts and thread rolling after heat treatment. Our differentiated thread rolling plate materials allow our products to achieve exceptional durability" stated Ms. Hsu.
Furthermore, the Jieng Beeing Group boasts over 50 years of technical experience and a comprehensive database, earning a strong reputation within the industry.
"Currently, non-standard orders account for over 50% of our business, which fully illustrates Jieng Beeing's technological differentiation from peers," Ms. Hsu stated proudly.
Regarding strategic responses, Jieng Beeing's R&D team swiftly adapts to changes in the fastener market, particularly in adjusting thread rolling plate materials, with the aim of providing customers with the best possible products.
Global Footprint
Jieng Beeing's products are exported to 25 countries worldwide, reflecting its extensive international presence. "As a Taiwan-funded enterprise of China, Jieng Beeing provides localized services through its offices in different countries," Ms. Hsu explained. "The production of identical screws can vary slightly between countries, and operators' practices also vary. Therefore, each office has dedicated engineers facilitating communication to meet diverse customer needs."
Ms. Hsu revealed: "Construction of the new factory at our Zhejiang Haiyan plant will commence in August 2025, with completion scheduled for the end of 2026. Smart production lines and digital management systems will be introduced then. Furthermore, the second-phase construction of our Vietnam factory is already underway, aiming to meet the demands of the Southeast Asian market."
Customer Feedback Mechanism
Through long-term cooperation with overseas clients, Jieng Beeing has established a sophisticated customer feedback analysis mechanism. "Jieng Beeing's sales team continuously gathers product usage feedback from customers, assisting them in better utilizing our products through remote meetings, product demonstration videos, and remote diagnostics," said Ms. Hsu.
Moreover, Jieng Beeing conducts on-site visits to clients' facilities, often accompanied by technical personnel. "Countries visited to date include Turkey, Thailand, Indonesia, India, Russia, Egypt, Uzbekistan, and Iran," Ms. Hsu detailed. "Through these channels, we gain in-depth understanding of customer requirements and product usage, transforming their feedback into actionable plans for product improvement and service optimization."
FEATURED COMPANY
Navigating Tariff Changes
Recent shifts in tariff policies have impacted the importexport operations of many enterprises. For Jieng Beeing, Ms. Hsu views tariffs as uncontrollable external factors.
In response, Jieng Beeing's strategy focuses on cost reduction and efficiency enhancement. "Our shared priority is cost reduction and efficiency improvement. We strive to offer discounts to our clients, enabling them to use Jieng Beeing's superior products and maintain customer loyalty," Ms. Hsu stated.
Equipment and Technological Upgrades
In adopting modern production equipment, Jieng Beeing has achieved simultaneous improvements in production efficiency and product quality through equipment upgrades and technical transformations.
"Traditional manufacturing of pointed-tail thread plate rolling processes involved over 10 processes," Ms. Hsu illustrated. "Jieng Beeing Group, collaborating with academic professors, developed specialized software paired with milling machines from Taiwan, China to create a fiveaxis automatic processing machine. By simply loading the prepared semi-finished product into the machine and initiating the process, all operations are completed rapidly, eliminating the instability caused by multiple machine handling in traditional methods."
Currently, automated equipment enhances production efficiency and guarantees product quality. All Jieng Beeing branch factories have introduced five-axis automated thread milling equipment. "Fasteners produced using Jieng Beeing dies serve not only foundational industries, rail construction, and new energy vehicles but also position us as a supplier to the high-end aerospace fastener die sector," Ms. Hsu added.
Intelligent Manufacturing Exploration
As artificial intelligence and big data technologies permeate manufacturing, Jieng Beeing is actively exploring their applications.
"Currently, Jieng Beeing utilizes its ERP database as the foundation for big data analysis, augmented by intelligent software to analyze and predict sales trends," Ms. Hsu explained. "In the future, we will integrate intelligent manufacturing management, progressively advancing towards the concept of a smart factory."
Future Development
Regarding future trends in the fastener die industry, Jieng Beeing has clear forward-looking plans and R&D roadmaps.
"Technology currently under development targets thread rolling plates for ultra-high hardness grade 14.9 fasteners. Grade 14.9 represents the pinnacle of fastener hardness, reaching the physical limit, intended for extreme applications such as high-performance racing, advanced precision industries, critical energy equipment, and aerospace engines," Ms. Hsu elaborated.
Concurrently, another project focuses on developing thread rolling plates for titanium alloy fasteners. "The primary requirements driving this development are lightweighting, corrosion resistance, and high-temperature resistance, making them suitable for aircraft fuselages and wings in the aerospace sector," Ms. Hsu added.
Looking ahead, Ms. Hsu stated: "Jieng Beeing's future direction lies in providing higher value-for-money fastener dies, attentively listening to the high-end demands of the industry, working hand-in-hand with our customers, and striving for the overall advancement of the industry."
From T-bolts to Global Accessories: How Xinchun Opens Overseas Markets on Quality
-
Zhejiang Xinchun Fastening Piece Co., Ltd. (hereinafter "Xinchun") has been deeply engaged in the field of accessories for industrial aluminum profile systems for many years. By adhering to quality, continuous innovation, and development, Xinchun has occupied an important position in the industry. In this issue, we spoke with General Manager Yang Chun about Xinchun's history, operating philosophy, and global ambitions.
Product Matrix
Xinchun began to produce screws and nuts for industrial aluminum profile connections in 2005, starting with T-nuts and T-bolts. Over time, the company's product range has been continuously enriched. At present, Xinchun has applicable accessories for some of the world's mainstream industrial aluminum profiles. In terms of product production, Xinchun's accessories are manufactured in accordance with the drawings and requirements of foreign original factories as much as possible; at the same time, the company itself has product development capabilities, and can provide suggestions and customize products according to customer requirements. When designing new accessories, 3D software is used for drawing and simulated assembly to ensure that the design is correct before trial production.
Adhering to Quality
Xinchun's goal is to provide customers with the highest quality products. Mr. Yang believes that only superior products can command fair prices and sustainable profits. Relentlessly competing on price alone leads to a narrowing path, ultimately ending in a dead end. Furthermore, without adequate profit margins, compromising on quality through shortcuts becomes inevitable. He emphasizes that he would rather customers leave Xinchun due to price than due to quality concerns. Currently, while some cost-driven clients in certain regions have gradually shifted their business elsewhere, many quality-focused customers have maintained enduring partnerships with Xinchun for over a decade, some even exceeding two decades.
Quality Control Advancement
Customers in different regions have different requirements for products. Relatively speaking, European clients prioritize performance and dimensional conformity; Japanese clients place greater emphasis on appearance finish. Xinchun encountered significant difficulties when first collaborating with Western European clients. These clients insisted on strict inspection against drawings; any dimensional deviation, even when functionally irrelevant, was unacceptable and triggered
An Interview with Yang Chun, General Manager of Zhejiang Xinchun Fastening Piece Co., Ltd.
claims. As a result, Xinchun paid substantial compensation and also bore the cost of airfreighting replacement goods to them. Frequently, the air freight costs even exceeded the value of the products themselves.
Precisely because of these experiences, the company implemented changes. Gradually, the number of customer claims decreased significantly. In 2024, during a visit by the Quality Assurance department of a Swiss client, the representative stated that since he joined the company, among their Chinese suppliers, Xinchun's products have never had quality problems.
Focus on Environmental Protection
Xinchun's products are all polished to make the surface look better. However, there will be wastewater discharge during the grinding process. Xinchun has installed wastewater treatment equipment in its factory to recycle wastewater and meet discharge standards. Later, the company improved the process so that there was no wastewater discharge during the grinding process. In addition, waste gas treatment equipment has been installed on all forming machines. At that time, the manufacturers who came to install the equipment all said that the waste gas generated during Xinchun's production process was very little, and it was even unnecessary to install the equipment.
Future Plans
For the future, Xinchun will continue to pursue a quality-
led strategy, deepen its presence in this field, and will not reduce quality for the sake of sales volume. Mr. Yang firmly believes that only with profits can there be development. At the same time, the company will actively explore overseas markets and participate in international exhibitions. At present, Xinchun's products have strong competitiveness in the Western European market.
Global New Products and Technologies
- 2H 2024 to 1H 2025
As an indispensable part of the manufacturing industry, fasteners not only play a crucial role in connection and fixation but also serve as an important driving force for industrial progress. With the continuous pursuit of efficiency, precision, and sustainability, the fastener industry is witnessing the age of innovation. The emergence of new products and technologies is redefining the future of this field.
Japan's Sanko Techno has launched the EZI-SA postinstalled screw fixing anchor bolt system, specifically designed for hanger rods in concrete structures. EZI-SA is suitable for various concrete substrates such as those with steel mesh frames and semi-precast panels.
EZI-SA is only for vertical hanger rods; reuse of anchors and drill holes is prohibited. During construction, safety helmets and goggles must be worn, and overtightening and the use of impact drivers exceeding 36V should be avoided. The installation process generates no waste, facilitating environmentally friendly disposal.
EZI-SA offers a W3/8 thread specification, with two embedding depths: a shorter 35cm and a standard 55cm. It meets strict building standards, providing a safe and efficient fastening solution for concrete hanger rods.
Baoti Group's Titanium-Alloy Coiled Wire in Large Coil Weights for Fasteners Successfully Passes Evaluation
Recently, the project "Development of Wire for a Certain Type of Titanium Alloy Nut" undertaken by China Wire Factory passed final acceptance, and the project "Development and Application Research of Large Single-Weight Coiled Wire of TC4 and TC16 Titanium Alloys for Aviation Fasteners" passed the process review.
The Wire Factory installed additional production equipment for fastener wire, and has successively broken through multiple key technologies such as hot continuous rolling of large-coil titanium-alloy wire rod, dimensional tolerance control of high-precision coiled wires, and surface coating of titanium alloy fastener wire. It has successfully developed large single-weight coiled wires of TC4, TC16 alloys and other specifications with coil weights exceeding 100 kg that meet technical requirements. It has also completed the upsetting validation of fasteners and successfully passed the application evaluation, process review, and final acceptance, laying a solid technical foundation for the subsequent industrialization and promotion of such products.
U.S. ARP Launches New Bolts to Facilitate Installation in Confined Spaces
High-performance fastener brand ARP has launched a new series of bolts for confined wrench-access areas. This series sold in five-piece, size-specific packs, including 3/8-16 and 3/824 specifications with 3/8-inch or 7/16-inch wrench heads, as well as 7/16-14 and 7/16-20 specifications with 7/16-inch or 1/2inch wrench heads. The materials include polished stainless steel and black oxide 8740 chrome-moly steel, with a tensile strength of 180 ksi, approximately 20% stronger than standard Grade 8 hardware.
The underhead lengths of the bolts are diverse: 3/8-inch specifications range from 0.5 inches to 5 inches, and 7/16-inch specifications range from 1.5 inches to 5 inches. Hexagonal and 12-point head types are available. All bolts are forged, heattreated, and precision-machined in-house by ARP to strictly control quality. This series of products further complements ARP's range of specialized fasteners and complete engine accessory kits widely used in the racing and automotive industries.
With the rapid development of e-mobility and renewable energy, the demand for high-performance busbar connections is growing significantly. Traditional solutions often involve complex plating processes and additional fasteners, resulting in not only high costs but also cumbersome procedures.
To address this, Bossard introduces the PEM® eConnect® Busbar Connection Solution: an innovative system specifically designed for electric vehicles, automotive electronics, and industrial applications. It streamlines processes, reduces costs, and delivers exceptional performance.
Japan's Saima Launches System 6 Aluminum Anti-Theft Screws
Japan's Saima has launched a new product, System 6 small screws, in its TRF series of anti-theft screws, now available in aluminum for the first time. System 6 small screws cover sizes M3, M4, and M5, with lengths ranging from 6mm to 16mm. They are available for sale in single units to meet diverse customer needs. Saima emphasizes that this product combines anti-theft functionality with aesthetics, making it suitable for occasions requiring both safety and appearance.
Interpretation of U.S. Standards for Mechanical Properties of Bolts, Screws and Studs
2024 and 2025 Editions
By Ren Chibing 2025-04-21
Building on the content covered in Part I (see CFM Issue 42, pp. 68-75), this article will elaborate in detail on the remaining content.
3.4.1 ASTM F3125 (2025) - Standard Specification for High-Strength Structural Bolts Made of Steel and Alloy Steel with Inch and Metric Sizes, Having Minimum Tensile Strengths of 120 ksi (830 MPa), 144 ksi and 150 ksi (1040 MPa) and Subjected to Heat Treatment
① This specification covers the chemical, physical, mechanical properties and torque-angle test requirements for two strength grades, two types (Type 1 carbon steel or alloy steel materials and Type 3 weathering steel materials) and two forms (heavy hexagon bolts or Tension Control Bolts (TC bolts) which are made of steel and alloy steel, undergo quenching and tempering treatment, and have dimensions in inches and metric units.
② The high-strength bolts manufactured in accordance with this specification are applicable to the structural connections covered by "Specification for Structural Connections Using High-strength Bolts" approved by the Structural Connections Research Council. ASTM first issued the ASTM F3125 standard in January 2015, and the latest version is in February 2025. It merges and replaces the original six steel structure bolt assembly standards (A325, A325M, A490, A490M, F1852 and F2280, which are now the affiliated grades), making the standard more concise, reasonable, systematic and easier to implement.
③ Among them, the A325/A325M and 144 ksi grades are permitted to be hot-dip galvanized.
Heavy Hexagon Head Bolt Assemblies
Tension Control Bolt (TC bolt) Assemblies
Figure 6 Two Kinds of High-strength Structural Bolt Assemblies (bolt/nut/washer sets)
Type: Heavy hex bolt
Table 14 Requirements for Grades A325,144ksi and A490 in the F3125 Standard for Structural Steel Bolts
Type: Twist-shear Bolt
Table 14 Requirements for Grades A325 and A490 in the F3125 Standard for Structural Steel Bolts
Flat, beveled or thick washers, if used F436/ F436M-1
Notes:
DH3
F436/ F436M-3 F436/ F436M-1 F436/ F436M-3
a. The Rotational Capacity (RC) Test for F3125 (A325, A325M, A490, A490M) shall include a combination of one bolt, one nut, and at least one washer. The test method applies to A325, A325M, A490, A490M bolts paired with the recommended nuts. The purpose of the test is to evaluate the effectiveness of lubrication and the qualification of torque and axial force during assembly. It further determines the assembly functionality under different coatings (hot-dip coatings), as well as the nut reaming amount, bolt strength, and material ductility, so as to ensure that the required pre-tightening axial force is achieved during assembly (of bolts, nuts, and washers).
3.4.2 F3148-24 Standard Specification for High-Strength Structural Bolt Assemblies (bolt/nut/washer sets) of HeatTreated Steel and Alloy Steel with Inch Dimensions and Minimum Tensile Strength of 144 ksi
①This specification covers the chemical, dimensional, physical, and mechanical requirements for quenched and tempered bolts made from steel and alloy steel. These bolts can be used as structural bolt assemblies, with sizes ranging from 1/2 inch to 1-1/2 inches, which consist of a non-grooved bolt with a fixed spline end, a suitable nut, and at least one washer.
② Installation requires a combined torque-turn method with specialized tools.
③ The types of chemical compositions of the bolt raw materials are as follows:
——Type 1: 144 ksi carbon steel, carbon-boron steel, alloy steel, or boron-added alloy steel (approximately equivalent to ISO Property Class 9.8)
——Type 3: 144 ksi weathering
ISO Property Class 9.8)
Table 16: Mechanical Properties and Matching Relationships of Non-Grooved Structural Steel Bolt Assemblies
Notes:
a. The 144 ksi (992 MPa) bolt assemblies were formulated by the American Steel Construction RCSC (Research Council on Structural Connections) in 2020 and incorporated into the "Specification for Structural Joints Using High Strength Bolts (A325/A490)".
Table 17 RCSC Specification Recommended Bolts and Matching Assemblies for ASTM A325 and A490
3.4.3 ASTM F3111-23 Specification for Heat-Treated Heavy Hex Structural Bolt/Nut/Washer Assemblies with a Minimum Strength of 200 ksi
① This standard covers structural bolt assemblies consisting of heat-treated steel and alloy steel heavy hex structural bolts, nuts, and washers in three nominal diameter sizes.
② The tensile strength ranges from 200 to 215 ksi (1378 MPa to 1481 MPa), equivalent to ISO Property Class 14.9 ultra-high strength fasteners.
③ Bolts and their matching nuts shall be structurally adjusted to avoid stress concentration. For example, regarding thread forms:
- Threads of Class 1 shall conform to the 2A UNJ coarse thread series specified in ASME B1.15;
- Threads of Class 2 shall comply with the provisions for the 2A UNJ coarse thread series in "Appendix A1" of this standard;
- A rolled thread blank area shall be left at the transition between the thread and the shank;
- Technical measures such as using thickened nuts shall be adopted.
④ Residual phosphorus coatings from the manufacturing process shall be removed to prevent phosphorus embrittlement and IHE (Internal Hydrogen Embrittlement). Surface treatments such as hot-dip galvanizing, Dacromet, mechanical galvanizing, and powder zinc infiltration are not permitted.
Table 18 Mechanical Property Requirements for ASTM F3111 Heavy Hex Structural Bolts
Notes:
a. Due to the high strength grade, attention shall be paid to the impact of EHE (Environmental Hydrogen Embrittlement). They shall not be used in heavy industrial environments with severe, high-concentration, and highly corrosive gases, fumes, or chemicals, or concentrated liquids or solids, as well as chemical environments that affect fasteners or their protective coatings.
b. Suitable for indoor applications in building construction, typically in dry interior environments, including structural steel embedded in concrete, encased in masonry, or protected by a
or by
3.5 High-Strength Externally Thread Fasteners (Approximately Equivalent to ISO Property Class 12.9)
3.5.1 ASTM F2882/F2882M-17 Standard Specification for Heat-Treated Alloy Steel Screws with Minimum Tensile Strength of 170 ksi and 1170 MPa (Inch and Metric)
① This specification covers requirements for quenched and tempered alloy steel screws with diameters from 0.060 to 11 2 inches (metric M1.6 to M42), having a minimum ultimate tensile strength of 170 ksi (1170 MPa min).
② The standard defines it as "Grade 11.9" (actually approximately equivalent to ISO Property Class 12.9), which is equivalent to the popular Grade 9 in U.S. trade.
Notes:
a. This specification specifies quality assurance requirements for carbon and alloy steel wires and bars used in mechanical fasteners. The manufacturing of materials shall comply with the smelting, casting, deoxidation, grain size, hardenability, and heat treatment specifications of this standard.
b. Several material grades are recommended in the appendix of the standard (see Table S1.1), such as Grade 4037 steel in ASTM G40370.
① The "Grade 9" ultra-high strength externally thread fasteners popular in U.S. trade have high strength, high hardness, and correspondingly high stress. Therefore, caution should be exercised in production and material selection.
② "Grade 9" is equivalent to Grade 12.9 of ISO 898-1. Currently, there is no clear standard specification in the United States, and it is recommended to refer to ASTM F2882/F2882M standard. At present, U.S. companies such as Fastenal, PFC, and BBI have issued corresponding enterprise standards.
Notes:
a. These "Gr9" fasteners are common in engineering. All "Grade 9" fasteners are manufactured using proprietary processes and materials.
b. Grade 9, equivalent to Grade 12.9 in ASTM A574 and ISO 898-1, represents the highest-strength standardized fasteners. Due to its high hardness and strength, it has a relatively obvious tendency to brittleness. Therefore, appropriate technical measures should be taken in the manufacturing process, and caution should be exercised in application.
① This guide, issued by the Industrial Fasteners Institute (IFI), aims to provide information on the mechanical properties of fasteners made of bainitic structure materials and ultra-high strength steels. It also offers preventive measures and processing technologies related to ultra-high strength steel fasteners, as well as guidelines for their application in automotive standard joint design.
② The guide specifies 3 ultra-high strength grades with ultimate tensile strengths of Grade 14.8U (1400~1576 MPa), Grade 15.8U (1500~1670 MPa), or Grade 16.8U (1600~1770 MPa), all with a bainitic metallographic microstructure.
③ The screws covered in this guide are bolts from M6 to M20, suitable for service temperature ranging from -50℃ to 200℃.
④ Ultra-high strength bolts and screws with a tensile strength of 1400 MPa or higher are highly susceptible to hydrogen embrittlement. They are only used in engines, gearboxes, axles, and structural components with low corrosion risk.
Table 19 Mechanical Property Requirements for F2882 Alloy Steel Screws
3.6 Mechanical Properties of ASTM Stainless Steel Fasteners
3.6.1 ASTM A193/A193M-2024 Standard Specification for Alloy-Steel and Stainless Steel Bolts for High Temperature or High Pressure Service and Other Special Applications
① Bolt materials suitable for high-temperature conditions include medium-carbon alloy steels, martensitic stainless steels, austenitic stainless steels, ferritic steels, and austenitic stainless steels such as B5 and B8, depending on performance requirements.
② Austenitic stainless steel bolt materials shall undergo solution annealing treatment and strain hardening. This includes finished fasteners of Class 1, Class 1B, Class 1C, Class 2, Class 2B, and Class 2C; as well as wires, bars, and finished fasteners of Class 1D. Bolt materials of Class 2, Class 2B, and Class 2C shall undergo strain hardening to achieve the required properties.
Table 22 ASTM A193/A193M Standard Specification for Stainless Steel Bolts for High Temperature or High Pressure Service and Other Special Applications
Notes: A193/A193M is formulated for high-temperature applications. Among them, Grade 1 is more common than Grade 2.
3.6.2 ASTM F593-24 Standard Specification for Stainless Steel Bolts, Hex Head Screws and Stud
① This specification includes requirements for chemical composition and mechanical properties of corrosion-resistant bolts, hex head screws, and studs (diameters: 0.25 -1.50 inches) manufactured from several commonly used stainless steel materials.
② This standard includes 7 groups of stainless steel grades, including 12 austenitic, 2 ferritic, 4 martensitic, and 1 precipitationhardening stainless steel.
Table 23 ASTM F593 Standard Specification for Stainless Steel Hex Bolts, Hex Screws and Studs
Matching Guidelines for External and Internal Thread Fasteners
① Table 24 provides information on matching application guidelines for external and internal thread fasteners.
② Grade C3, DH3, 8S3, and 10S3 nuts are made of weathering steel. Their atmospheric corrosion resistance is significantly better than that of carbon steel with or without copper addition. When properly exposed to the atmosphere, these steels can be used bare (uncoated) in many applications.
Table 24 Applicable Matching Guidelines for Nut and Bolt Grades
Grade
Type O Unplated d
Type
F3125 Type 1 A490、F2280
F3125 Type 3 A490、F2280 Unplated d 1/2~1-1/2
F3125 A325M Type 1 Unplated d M12~M36
F3125 A325M Type 3 Unplated
F3125 A490M Type 1
F3125 A490M Type 3 Unplated
F3148 Type 1 Unplated d 1/2~1-1/4
F3148 Type 3 Unplated d 1/2~1-1/4
F1554 Grade 36 Unplated d 1/2~1-1/2 A
Zinc-plated e 1/2~1-1/2
F1554 Grade 55 Unplated d 1/2~1-1/2
F1554 Grade 105 Unplated d All
Zinc-plated e
Notes:
B、C、C3、D、DH、DH3
a. Grade 2 or 2H nuts manufactured in accordance with A194/A194M specifications, marked with their grade symbols, are acceptable equivalents to Grade C heavy hex nuts and Grade D nuts. Nuts manufactured in accordance with the Grade 2H requirements of A194/A194M specifications and marked with their grade symbols are acceptable as Grade DH nuts.
b. "Recommended" indicates that the nuts available in the market have the most appropriate mechanical properties and dimensional configurations (types), enabling the bolts to be stretched to the required load when used in combination.
c. "Suitable" indicates that the nuts have mechanical properties allowing the bolts to be stretched to the required load when used together; however, the suitability and availability of dimensional configurations (types) need to be considered. Others are unsuitable.
d. "Unplated" nuts refer to nuts for externally thread fasteners with smooth surfaces (unplated or uncoated) or insufficient plating thickness.
e. "Zinc-plated" nuts refer to nuts used for externally thread fasteners that are hot-dip galvanized, mechanically galvanized, or have electroplating/coating of sufficient thickness, requiring hole drilling and thread tapping on the internal threads of the nut.
Financial Report of Top 10 Fastener Listed Companies
(Unit: million USD)
Ranked by market value as of August 26th, 2025, and converted based on the exchange rate of that day.
Financial Report of International Fastener Listed Companies
Converted based on the exchange rate as of August 26, 2025.
Import and Export Situation of Fasteners in China in the First Half of 2025
Executive Summary
The import and export situation of China's fasteners in the first half of 2025 has become the focus of the industry. This report summarizes Jan-Jun 2025 customs statistics for HS 7318 and highlights key trends by destination/source and unit values.
Exports
Jan-Jun 2025 China exported 3.056 million tons of fasteners (+12.9% YoY; +343,580 t). Export value totalled USD 5.920 bn (+7.9% YoY; +USD 423.8 mn).Among them, steel fasteners under commodity code 7318 accounted for the largest proportion, with an export value of 4,972,930 thousand USD.
From January to June 2025, the average export price of China's fasteners was 1,900 USD/ton, while that from January to June 2024 was 2,000 USD/ton. In June 2025, the average export price of China's fasteners was 2,000 USD/ton.
In the first half of 2025, China's fastener export market showed a strong growth trend, especially to the top 10 export destinations. Ranked by export value, they were: the US, Vietnam, Russia, Germany, Japan, Thailand, South Korea, the UAE, the UK, and Mexico. Among these, the export values to Vietnam, Germany, Thailand, and the UK achieved significant growth of over 20% YoY, with growth rates of 27.9%, 23.8%, 21.1%, and 28.5% respectively.
Note: The
Table 1 Top 10 Regions of Fastener Exports from China in the First Half of 2025 (Unit: USD)
Figure 1 Top 10 Regions of Fastener Exports from China in the First Half of 2025 (Unit: USD)
Imports
From January to June 2025, the import value of China's steel fasteners under commodity code 7318 was approximately USD 1.126 bn. Compared with USD 1.228 bn in the same period last year, the import value decreased by about 8.27%.
Note: The fasteners in the charts refer to steel fasteners classified under commodity code 7318. Data sources: China Customs.
In the first half of 2025, the top five sources of China's fastener imports were Japan, the US, Germany, Taiwan (China), and Italy. Fasteners from these regions typically feature advantages such as high quality, high precision, and technological innovation. With the rapid development of China's high-end equipment manufacturing industries such as automotive and aerospace, the market's requirements for the performance and quality of fasteners have become increasingly stringent. In the future, China's manufacturing industry will accelerate its intelligent transformation, continuously improve product quality, and forge ahead in the global market full of opportunities and challenges.
Table 2 Top 10 Regions of Fastener Imports into China in the First Half of 2025 (Unit: USD)
Figure 2 Top 10 Regions of Fastener Imports into China in the First Half of 2025 (Unit: USD)
U.S. Fastener Import and Export Data from January to June 2025
Note: "-" indicates data not shown or disclosed.
In terms of imports, the total value of U.S. fastener imports from January to June 2025 reached $3,405,555,986, a decrease of 3.44% compared with the same period in 2024. This fluctuation not only reflects the dynamic adjustment of the global supply chain but may also be related to the periodic shifts in domestic market demand in the United States.
As one of the core sources of U.S. fastener imports, China has long maintained a significant share in the U.S. import market by virtue of its advantages in a complete industrial chain, stable product quality, and competitive price system. Despite the uncertainties in the international economic and trade environment in recent years, China's exports of fasteners to the United States have remained highly resilient.
On the export front, the value of U.S. fastener exports in the first half of 2025 was $2,876,954,966, a slight decrease of 0.16% compared with the same period in 2024. The decline was much lower than that on the import side, indicating the relative stability of the U.S. export market. This situation benefits from the accumulation of the U.S. fastener industry in high-end technology fields, such as fasteners for aerospace and special fasteners for new energy equipment. Relying on technological and performance advantages, U.S. fasteners maintain a high market dominance. In terms of export destinations, trade within the North American Free Trade Area (NAFTA) remains the mainstay. At the same time, emerging markets in Asia, Europe, and other regions have also become important sectors supporting the U.S. export scale.
Overall, the import and export trade of U.S. fasteners in the first half of 2025 showed a trend of slight fluctuations in imports and overall stability in exports. The fluctuation in import volume is the result of the combined effect of global supply chain restructuring and changes in domestic demand, while the stability of exports confirms its core technological competitiveness in high-valueadded fields.
Table 1: U.S. Fastener Import Data from January to June 2025
Table 2: U.S. Fastener Export Data from January to June 2025
Figure 1 U.S. Fastener Import and Export Values for January-June 2023, 2024, and 2025 (USD)
Analysis of the Russian Fastener Market
With a population of 146 million, abundant resources, and a solid manufacturing foundation, Russia is ushering in a new round of industrial revitalization. Against this backdrop, its fastener market presents prominent characteristics such as strong demand, concentrated imports and an urgent need for industrial upgrading, especially in industries like machinery, automotive, construction and furniture.
Currently, the import market for fasteners in Russia is mainly distributed across countries and regions such as China, Germany, Turkey, and India. This article will comprehensively analyze the current situation and opportunities of Russia's fastener market from dimensions such as the recent situation of Russia's manufacturing industry and import conditions.
Manufacturing and Fastener Market
Russia's four major industrial concentration areas are mainly distributed in Moscow (comprehensive heavy industry), St. Petersburg (shipbuilding and electronics), the Urals (steel and machinery), and Novosibirsk (energy and military industry). Each of these four industrial zones has its own characteristics and forms a fastener demand matrix, with a focus not only on quantity but more importantly on high-grade and special fastener requirements.
It is the strong and diverse industrial foundation formed by these four industrial zones that provides the core driving force for the comprehensive development of Russia's industry and is directly reflected in the strong growth of its macroeconomy.
Russia's economy grew by 4.1% YoY in 2024, 0.2 percentage
points higher than the official forecast, with the total economic output breaking through 200 trillion rubles for the first time in history. This growth was mainly driven by the processing industry: the machinery manufacturing industry grew significantly by 19.5% YoY, contributing 40% of the growth in the processing industry. Among them, the production of transportation machinery increased by 29.6%, automobile manufacturing by 16.5%, and the output of computers and electronic technology rose 28.8%; the pharmaceutical industry also achieved a significant growth of 18%.
From the perspective of application fields, the mechanical engineering and automotive industries are at the forefront of fastener demand, followed by the construction and furniture industries. In terms of product types, bolts (37%), self-tapping screws (34%), and nuts (19%) constitute the main subdivided categories, a structure that highly matches the types of fasteners (steel products) exported by China to Russia.
In 2024, the Russian fastener market continued its trend of high dependence on imports. Among the top 10 supplying countries, China accounted for 87.66% of the total export volume with an export value of USD 567 million, and its products (priced at USD 1.44 per kilogram) boasted significant cost-performance advantages. Although European countries such as Germany and Austria supplied high-end products with a unit price exceeding USD 11 per kilogram, their market shares remained limited due to geopolitical constraints. In contrast, the imports of special fasteners from countries like Thailand (priced at USD 41.20 per kilogram) reflected Russia's demand in the field of precision fasteners.
Import Situation
Table 1: Top 10 Import Countries of Russian Fasteners (Steel Products) in 2024 (Ranked by Value)
Note: Orange represents Asian countries, green represents European countries; Turkey is classified in Europe. Data sources: UN Comtrade Database.
Figure 1: Top 10 Import Countries of Russian Fasteners (Steel Products) in 2024 (Ranked by Value)
Table 2: Top 10 Import Countries of Russian Fasteners (Steel Products) in 2023 (Ranked by Value)
Data sources: UN Comtrade Database.
Compared with the 2023 ranking, the 2024 list of top 10 import values shows that China remains firmly in the first place; Thailand makes its debut on the list by virtue of high-unit-price special fasteners; European countries such as Germany hold their ground in the high-end segment with high unit prices; and India and Poland have moved up in the ranking.
Trade Situation of Chinese Fasteners (Steel Products) Exported to Russia
Data sources: China Customs.
From 2022 to 2024, China's exports of steel fasteners to Russia showed a trend of first declining and then rising - dropping by 7.29% in 2023 and rebounding rapidly by 28.63% in 2024, with the value reaching USD 567 million, a record high; in 2025, the cumulative exports from January to June amounted to USD 274 million, maintaining a YoY growth of approximately 7.94% despite the high base in the same period last year, demonstrating resilience in demand.
Figure 2: Top 10 Import Countries of Russian Fasteners (Steel Products) in 2023 (Ranked by Value)
Table 3: Situation of Chinese Fastener (Steel Products) Exports to Russia from 2022 to 2024
Table 4: Situation of Chinese Fastener (Steel Products) Exports to Russia from January to June 2025
Japan Fastener Import and Export Data from January to June 2025 Turkey Fastener Import and Export Data from January to
June 2025
Table 1: Turkey Fastener Import Data from January to June 2025
Table 2: Turkey Fastener Export Data from January to June 2025
Table 1: Japan Fastener Import Data from January to June 2025
Table 2: Japan Fastener Export Data from January to June 2025
Malaysia Fastener Import and Export Data from January to June 2025
15,446,826 48,481,691
11,925,106 43,734,064 March 15,209,823 47,671,904 April 17,943,330 54,222,513
31,157,285 59,863,985
- 28,223,532
Note: "-" indicates data not shown or disclosed.
Table 1: Malaysia Fastener Import Data from January to June 2025
Table 2: Malaysia Fastener Export Data from January to June 2025
EU Fastener Import and Export Data from January to May 2025
Table 1: EU Fastener Import Data from January to May 2025
Table 2: EU Fastener Export Data from January to May 2025
Fastener Import and Export Data from January to May 2025
Table 1: India Fastener Import Data from January to May 2025
Table 2: India Fastener Export Data from January to May 2025
– Forging a Global Hub for Connectivity and Innovation
The 15 th Fastener Expo Shanghai (FES) concluded successfully after a three-day run at the National Exhibition and Convention Center (Shanghai) from June 17 to 19, 2025. As one of the world's top three professional fastener exhibitions, this year's event upheld its reputation for being "professional, international, and efficient," bringing together enterprises from across the global fastener industry to foster connections between supply and demand. The expo saw comprehensive upgrades in exhibition scale, product structure, and supporting services.
The 2025 edition occupied three halls: two dedicated tor finished fasteners (Halls 1.1 and 2.1) and one showcasing fastener equipment, wires, molds, and consumables (Hall 3). Over 1,200 enterprises participated, attracting 21,781 professional visitors, including 1,136 from overseas.
The expo featured a vibrant lineup of both established global brands and emerging players, jointly showcasing the steady progress of the manufacturing sector.
Alongside the exhibition, a variety of industry activities were held, highlighting fastening technologies and application practices, and establishing a hub for efficient collaboration and knowledge sharing.
One-on-One Buyer Matching Sessions
A flagship event connecting Chinese suppliers with distributors and buyers from Europe, Japan, South Korea, Southeast Asia, the Middle East, and Russian-speaking regions in Central Asia. This facilitated international business development for Chinese companies.
4th National Invitational Tournament on Fastener Anti-loosening Performance & 4th Fastening AntiLoosening Technology Forum
Held on the opening day, these events evaluated antiloosening products based on performance, ease of installation, and reusability. They offered valuable guidance for end-users in product selection and opened up paths for commercialization- serving as a crucial platform for technical exchange and investment.
The 19th Industrial Directory of Chinese Fastener Signing Ceremony & 42nd CFM Launch
The 19th edition of Industrial Directory of Chinese Fastener integrates industry news, cutting-edge technologies, future trends, and business directories. It serves as a key reference for decision-makers, buyers, researchers, and enthusiasts. Mr. Yang Junfeng, Founder and Chairman of CFM, attended the launch for a book signing, alongside General Manager Ms. Yuan Xiaocheng and the editorial team, who shared insights into the compilation process and industry trends.
The 42nd issue of CFM, released during the expo, included the latest global fastener news, import and export data from various regions, valuable insights shared by leading fastener enterprises, and a curated list of recommended suppliers of Fastener Expo Shanghai, drawing extensive interest from professional visitors.
1st National Fastener Distributors Conference
Representatives from over 200 large and medium-sized fastener wholesalers and distributors across more than 50 Chinese cities gathered to discuss H2 2025 market trends, corporate development strategies, and the evolution of distribution models.
2025 Screw Night & "Golden Screw Award" Ceremony
Co-hosted by CFM and FES on June 18, this prestigious event brought together over 600 attendees, including association leaders, professionals, scholars, and exhibitors, to celebrate excellence in the sector.
Indian Buyer Delegation Factory Tour
On June 19, an Indian buyer delegation visited the Ningbo Fastener Equipment Industrial Base in Zhejiang Province, conducting detailed inspections of intelligent cold heading machines, high-speed thread rolling machines, and technical solutions at companies including Sijin Intelligent Forming Machinery Co., Ltd., Ningbo Sijin Benniu Machinery Co., Ltd., and Yongjin Smart Devices (Ningbo) Co., Ltd.. The tour helped strengthen direct connections between Chinese equipment manufacturers and overseas buyers.
The next Fastener Expo Shanghai will be held at the National Exhibition and Convention Center (Shanghai) from June 24–26, 2026. We look forward to continuing the industry's journey of innovation and development with you.
CFM Participates in 2025 Manufacturing Expo – Supporting Chinese Fastener Industry's Expansion in Southeast Asia
On June 18, 2025, the Manufacturing Expo officially kicked off at the Bangkok International Trade & Exhibition Centre (BITEC) in Thailand. CFM traveled to Thailand to participate in the exhibition, further supporting the global expansion efforts of Chinese fastener enterprises.
As the second-largest economy in Southeast Asia (after Indonesia), Thailand is widely recognized as one of the world's newly industrialized countries and emerging market. Its manufacturing sector, particularly electronics, has experienced rapid growth and notable industrial transformation. The automotive industry, in particular, serves as a cornerstone the Thai economy, making the country Southeast Asia's automotive manufacturing hub of Southeast Asia and the largest automotive market in ASEAN. China, Japan, and the United States continue to be Thailand's top three trading partners.
Statistics show that the previous edition of the Manufacturing Expo drew over 2,000 leading brands from 30 regions and countries, including Australia, China, France, Germany, Hong Kong (China), India, Italy, Japan, South Korea, Malaysia, Russia, Singapore, the Philippines, the United States,
and Vietnam, showcasing cutting-edge technologies and services.
Held annually in Bangkok, the Manufacturing Expo has successfully completed 30 editions to date. This year's exhibition covered of 60,000 square meters, hosted 2,100 exhibitors and brands, and welcomed 55,580 professional visitors.
The exhibits spanned nine major fields:
• Power transmission and control
• Robotics and automated production lines
• Industrial automation and control
• Scanning equipment and label printing machinery
• Air compressors
• Automotive manufacturing
• Mold manufacturing
• Coating and surface treatment
• Electronic components and production equipment
Known as the "Grain of Industry," fasteners are indispensable to industrial manufacturing. Chinese fasteners, praised for their high cost-effectiveness and reliable delivery, have earned the trust and recognition of the global manufacturing industry.
As a crucial bridge between China's fastener industry and global markets, CFM is committed to promoting the excellence of Chinese fastener products on the international stage. Through a professional lens and rich content, CFM showcases innovative technologies and diverse product portfolios of Chinese fasteners. With high-resolution visuals and detailed information, CFM enables global customers to clearly understand the core strengths of Chinese fasteners. At the expo, CFM's booth drew the attention of numerous international buyers and industry professionals. The team actively introduced partner enterprises to visitors, systematically demonstrating their manufacturing capabilities, and received widespread recognition and praise from attendees.
CFM Revisits Manufacturing World Tokyo: International Opportunities and Challenges for Chinese Fastener Enterprises
From July 9 to 11, 2025, Manufacturing World Tokyo was held at Makuhari Messe in Chiba-city, Japan. The exhibition gathered 1,800 exhibitors from around the world, with international participants mainly from Japan, China, South Korea, and Southeast Asia. The event attracted 65,000 professional visitors and spanned 11 halls, showcasing three major categories of exhibits:
• IT, DX, and 3D printers
• Parts, manufacturing technologies, ODM/EMS
• Factory facilities and measurement equipment
Among them, as a fundamental element of industrial manufacturing, fastener-related enterprises are mainly gathered in Hall 4. Twenty outstanding Chinese fastener
enterprises participated, collectively demonstrating the strength of "Made in China".
On-site Insight: Coexistence of Popularity and Challenges
CFM's on-site staff observed strong visitor turnout, with the booth of MISUMI industrial products e-commerce platform being particularly bustling - highlighting the rapid development of the e-commerce model and digital transformation in the industrial supply chain.
Japanese companies sent cross-functional teams to relevant exhibitions, including sales, procurement, marketing, human resources, and technical personnel, reflecting their strong commitment to industry exchanges and technological
updates. However, some exhibitors told CFM staff that although the exhibition remained popular, changing composition and number of exhibitors indicated intensified market competition.
Chinese exhibitors generally noted that Japanese customers are renowned for their strict quality standards and long decision-making cycles. It often takes two to three years to convert potential leads into orders. Although Chinese fasteners are recognized for their "high cost-performance ratio" in overseas markets, Japanese-funded enterprises still prefer purchasing from local suppliers when quality and price are comparable.
Market Analysis: Panorama of Japan's Fastener Trade
As one of the world's high-end manufacturing centers, Japan's demand for fasteners leans toward stability and precision. Public data shows that Japan's annual import value is approximately USD 3 billion, with China being the largest supplier, accounting for nearly 60%. However, Chinese exports are mainly general-purpose and mid-range products; in key fields such as high-end precision, automotive and aerospace fasteners, Japanese local enterprises and those from Europe and the United States continue to dominate, with a notable price gap and highlighting the urgency for Chinese enterprises to upgrade and innovate.
Statistics show that Japan's fastener imports rose during
2020-2022 but subsequently fell back. By 2024, both import value and average unit price had dropped below 2022 levels. Following a peak in 2021, Japan's fastener exports declined year by year, with both export value and average unit price continuing to decrease through 2024. Although Japan's fastener export value remained significantly higher than its import value, the persistent decline in export unit prices resulted in a narrowing overall trade surplus.
CFM's Role: Deepening Services to Connect China and Japan
As a media outlet in China's fastener industry, CFM has participated in Manufacturing World Tokyo multiple times. At this year's show, it actively distributed the 42nd issue of CFM, efficiently reached Japanese, Korean, and other international purchasers while serving as an important channel for disseminating updates on China's fastener industry.
Meanwhile, CFM staff collected first-hand market information and conducted in-depth interviews with exhibitors, providing real-time insights into the Japanese market. This trip laid a solid foundation for the upcoming ChinaFastener. com Global Business Trip - Japan Station, which will be held in December this year, continuing to assist Chinese enterprises in developing and maintaining valuable Japanese customer resources.
Faced with high barriers to entry and long lead times in the Japanese market, CFM believes that the intensive efforts of Chinese enterprises and the support of various channels will be key to breaking through market bottlenecks and achieving long-term success in Japan.
CFM Post-Show Review: How to Tap into South Asia's Largest Fastener Market?
The India Fastener Show was successfully held from July 11 to 13, 2025. Over the three days, the exhibition halls were buzzing with activity, featuring more than 180 exhibitors, 225 brands, and over 15,000 fastener products and supporting solutions. Professional attendance exceeded 10,000, setting a new record as South Asia's largest fastener exhibition.
Official data reveals broad sector coverage - including automotive manufacturing, construction engineering, industrial production, aerospace, electronics, specialty alloy materials, manufacturing equipment, measurement technology, quality inspection, automated assembly, and warehousing and logistics systems.
The 42nd issue of CFM made its debut during the event. Many Indian buyers and distributors scanned QR codes to access the digital edition, inquiring deeply about Chinese manufacturers' production capabilities, delivery cycles, and after-sales services in India. One buyer showed keen interest in solutions advertised in CFM, extensively questioning exhibitors about capacity and delivery before submitting onsite collaboration proposals.
According to data from the 19th issue of Industrial Directory of Chinese Fastener, India ranked as China's 9thlargest export partner for steel fasteners in 2024, with bilateral trade reaching USD 297.5 million. India also secured the position as the 2nd-largest export destination for fasteners from Thailand (USD 20.0 million) and South Korea (USD 13.5 million).
These figures underscore India's growing influence in the global fastener trade. Beyond its strong trade relationship with
China, India is becoming a key market for other Asian countries such as South Korea and Thailand. With manufacturing expanding worldwide, India's fastener market holds immense potential to deepen international partnerships and elevate its role in global supply chains.
Notably, following the 15th Fastener Expo Shanghai, a 14-member delegation led by Mr. Abhijat Sanghvi - President of the Fasteners Association of India (FAI) and Managing Director of Sang Fasteners Pvt. Ltd. - visited leading Chinese manufacturers including Sijin Intelligent Forming Machinery Co., Ltd., Ningbo Sijin Benniu Machinery Co., Ltd., and Yongjin Smart Devices (Ningbo) Co., Ltd., securing multiple procurement intentions.
These visits reinforced industrial ties between China and India, highlighting India's drive toward international manufacturing standards. As India's manufacturing sector surges, demand grows for high-end, specialized, and unique fasteners, Chinese enterprises are shifting from a "costeffective" approach to one emphasizing "high-end, advanced, specialized, and distinctive" solutions, unlocking new growth and fostering sustainable partnerships.
CFM at Vietnam Manufacturing Expo - Competition and Opportunities in the Vietnamese Market
From August 6 to 8, 2025, the Vietnam Manufacturing Expo (VME) was held at I.C.E. Hanoi. Over three days, 200 international brands from over 20 countries and regions worldwide participated together, attracting over 10,000 professional visitors.
According to on-site observations by CFM staff, exhibitors specializing in fasteners and fixing solutions were concentrated in a dedicated exhibition area. More than 60 Chinese domestic enterprises and Chinese-invested Vietnamese companies participated, along with over 30 local Vietnamese enterprises, making them dominant participants in this section.
Staff feedback indicated that visitors showed strong interest in Chinese fastener enterprises and their products, with promising potential for further cooperation. Additionally, the CFM magazines distributed on-site were well-received. Visitors from Vietnam, Japan, Europe, America, and Taiwan, China, actively requested the magazines and inquired about subscription methods, hoping to connect with suppliers more effectively through this channel.
Notably, representatives from NSS Fasteners (Pty) Ltd., Africa's largest industrial fastener distributor, visited the CFM booth. CFM successfully established business ties with
the company, laying an important foundation for Chinese enterprises to expand into the African market.
The exhibition hall of this event was divided into sections such as mechanical manufacturing, automation equipment, fasteners and fixing solutions, industrial measurement, mold manufacturing and maintenance. The venue attracted a large number of visitors and facilitated efficient exchanges. On-site staff distributed the latest issue of CFM, conducted market
demand research, and engaged in friendly communication with local Vietnamese enterprises to prepare for the business trip plan to Vietnam. Several exhibitors subscribed to CFM onsite, expecting to expand their fastener procurement channels.
It is worth mentioning that, aside from Chinese exhibitors, Japanese enterprises were also a significant part of the expo. Co-organized with VME, the 11th Vietnam-Japan Exhibition on Supporting Industries in Hanoi (SIE 2025) featured 40 booths, among which 20 were dedicated to the procurement needs of Japanese buyers and 20 to the capacity display of Vietnamese manufacturers. This precisely matched the localized procurement demands of Japanese automobile, motorcycle, electronics, and home appliance enterprises in Vietnam.
To gain a more intuitive understanding of Japanese enterprises' supply chain layout in Vietnam, CFM's global business trip group, organized in 2024, had already visited TOKYO BYOKANE CO., LTD., a Japanese-invested enterprise with a factory in Vietnam. In addition, the group visited multiple Chinese-invested Vietnamese factories, local Vietnamese manufacturing enterprises, and well-known distributors, conducting on-site investigations into local market demands and cooperation models in Vietnam.
Statistics show that among the top 10 regions exporting fasteners to Vietnam in 2024, mainland China ranked first in both value and quantity, totaling USD 518.23 million and 174,614,821 kilograms, respectively. It was followed by South Korea and Japan, with South Korea ranking second at USD 82.68 million and Japan third at USD 38.58 million. The combined share of these three regions accounted for over 90% of the total among the top 10 regions.
TecoMaco Vietnam Co., Ltd.
Lung Kee Group (LKM)
2025-2026 FASTENER EXHIBITIONS
15-17
27-29
1-3
7-10
15-16
International Fastener Expo
美国拉斯维加斯国际紧固件展（CFM Partner）
Las Vegas·USA
Hand Tools & Fastener Expo
印度国际五金工具展
Mumbai·India
Manufacturing World Osaka 日本(大阪)工业展览会（CFM Partner）
Osaka·Japan
Fastenex（CFM Partner） 俄罗斯国际紧固件展览会
Moscow·Russia
Fastener Poland
波兰克拉科夫五金工具及紧固件展
Krakow·Poland
FastTec
21-23
俄罗斯国际紧固件及五金展览会
Moscow·Russia
29-31
19-22
Korea Metal Week（CFM Partner） 韩国金属周
Seoul·South Korea
Istanbul Hardware Fair（CFM Partner） 土耳其伊斯坦布尔国际五金展览会
Istanbul·Türkiye
Manufacturing World Fukuoka 日本(福冈)工业展览会 Nov.
20-22
India Fastener Show 印度紧固件展览会（CFM Partner）
Kolkata·India
3-5
Fukuoka·Japan
Eisenwarenmesse Fair
德国（科隆）五金展览会
Cologne·Germany
Fastener Expo Frankfurt
法兰克福紧固件专业展（CFM Partner）
São Paulo·Brazil 7-10
Feicon Batimat 巴西圣保罗国际五金展览会
Tube & Wire
13-17
德国杜塞尔多夫线材展览会
Dusseldorf·Germany
Sydney Build
29-30
澳大利亚五金及建材展览会
Sydney·Australia
InaFastener 印尼雅加达紧固件展览会
Jakarta·Indonesia
METALTECH & AUTOMEX
Kuala Lumpur·Malaysia 20-23
马来西亚国际机床、金属加工设备与自动化科技展
1
24-26
Taiwan International Fastener Show 台湾高雄扣件展
Kaohsiung·Taiwan
Fastener Expo Shanghai 上海紧固件专业展（CFM Partner）
Shanghai·China
Ningbo ABC Fasteners Co., Ltd.
宁波联欣标准件有限公司
Ningbo ABC Fasteners Co., Ltd. is one of the main manufacturers for building anchor in China. We are able to provide various kinds of anchor such as drop in anchor, wedge anchor, metal frame anchor, sleeve anchor, etc. We also provide standard & non standard parts.
Zhejiang Xinchun Fastening Piece Co.,Ltd is the enterprise which specializes in the development, sales, service, and production of industrial aluminum profiles, connectors, bolts, and more. The main products include the T-bolt, T-nut, Flange nut, Square nut, Spring nut, Channel nut, Cold forged nonstandard fasteners, Stainless steel bolts, Stainless steel nuts, and stainless steel pins.
Jiaxing Xingxin Standard Heat Treatment Co., Ltd is found in July 2005. It has grown to the leader of fastener heat and surface treatment in China. The main products including hex bolt, hex nut, drywall screw, threaded rod and washer etc.
Ningbo Jiulong Chuangzhan Fastener Holding Co., Ltd. is an enterprise specializing in the production, research & development, sales, and technical service of high-strength fasteners. The products, including hexagon bolts, socket head screws, studs, hexagon nuts, welding studs, other high-strength fasteners, and non-standard fasteners made according to the drawings, are widely applicable in metallurgy, power, petrochemical industries, large span steel structure factories, high-rise buildings, wind power generation, railway bridges, cross-sea bridges, subways, oil refineries, etc. The company has passed the ISO9001:2015 Quality Management System, IATF 16949:2016, ISO14001:2015, and ISO45001:2018 certifications. All products adhere to the standards of GB, ISO, EN, DIN, ASME, JIS, BS, and other international standards.
We are specialized in producing all kinds of Threaded Rods and Short Studs. Grade 4.8, 5.8, 8.8, 10.9, 12.9; A2-70, A2-80, A4-70, A4-80; ASTM A307, SAEJ429 Grade 2 & 5; ASTM A193 B7, B7M, B8, B8M, L7; Brass etc.
Our company specializes in construction fasteners, which are widely used for outdoor walls, indoor decoration, and the fixing and installing of doors, windows, ceilings, air-conditioners, roof boards, floors, etc. Additionally, they are utilized for highway guards and photovoltaic equipment. The products are made of carbon steel, stainless steel, alloy steel, reinforced nylon, brass, zinc alloy and so on.
Ningbo Gangtong Zheli Fasteners Co., Ltd is a manufacturer in China which mainly produces high strength standard fasteners. Our products consist of bolts & nuts assembled, threaded rod or studs, washers, which are made from both carbon steel and stainless steel. The company always carries forward the spirit of "Employee is footstone, customer first, technique expert, quality first".
Yongnian County Tianbang Fasteners Co., Ltd. was established in 2005. We specialize in the manufacturing of various types of hex bolts, hex nuts, flat washers, threaded rods, anchor bolts, and non-standard fasteners, etc. With over 10 years of experience in research, development, and production, our products are exported to Europe, the United States, Southeast Asia, Russia, and other regions.
The company established in 1992, covering an area of 11,100square meters, with 24 forging machines and 24 threading machines, mainly produce hex bolts, flange bolts, carriage bolts, square head bolts, and non-standard bolts as required, assured with ISO 9001 and CE certificate.
CHINFAST Co., Ltd.
嘉兴市锋捷贸易有限公司
CHINFAST wholly owns two screw factories - Haiyan Yousun Enterprise Co., Ltd. and Joystart Automotive Parts Co., Ltd. YOUSUN factory's AD rate imposed by the EU is only 39.6% with tariff code: C788. Our YOUSUN factory is specialized in producing wood timber screws, chipboard screws and drywall screws with the production capacity of 1000 tons/month. The wood timber screw has an ETA certificate; the drywall screw and the chipboard screw have CE certificates. JOYSTART factory is specialized in the production and DIY package services for Advanced Multi-Purpose Screws, Stainless Steel Screws, etc. Welcome to visit us!
Reliable Partner: Established in 1997, we're a leading manufacturer, exporting 2,000 containers annually. We specialize in screws, anchors, and plastic products, with a dedicated DIY packaging facility. Certified with ISO9001 and ISO14001, we strictly adhere to management systems, focusing on quality and cost control. Our excellent testing and R&D team, driven by innovation and passion for development, ensures continuous progress. Partner with us for consistent quality and service.
Handan Feite Metal Products Co., Ltd. integrates production and sales, renowned for its highquality products and timely delivery. The company specializes in manufacturing hexagon flange concrete cement self-tapping self-cutting anchor bolts, elevator expansion screws, wedge anchors, British/American standard carriage bolts, British/ American standard hex bolts and flange bolts, spring nuts, stamping products, and also offers customized production services.
Shenhu was established in 1984. We are a professional fastener manufacturer that integrates production, supply, and marketing. We have over 100 advanced equipment from Taiwan and Japan to ensure high-quality products. We have passed IATF 16949, ISO 45001, and ISO 14001. Also, we implement ERP computerized network management, focusing on providing high-quality service for clients in various industries.
Join Fasteners has grown into a leading player in the fastener industry. We're holding three main factories covering an area of around 200 acres, supplying our customers with One-Stop shopping for Premium Quality and Multi-grade steel screws, bolts, nuts, washers, threaded bars, and so on.
Jiaxing zhengying Hardware Co., Ltd. was founded in 2005. It is a Mainland-Hongkong joining venture company. Our productions include chipboard screw, drywall screw, drilling screw, machine screw, non-standard fasteners, etc. The annual production capability can reach The annual production capability can reach to 3000-5000 tons.
86-573-85535366
jxzywj@jxzywj.com www.zhengying.chinafastener.com
Zhejiang Excellent Industries Co., Ltd.
浙江天开实业有限公司
Zhejiang Excellent Industries Co., Ltd. was founded in 1997. We have two production bases (China: ZHEJIANG EXCELLENT and Vietnam: TINSING INDUSTRY), mainly producing screws, anchors and DIY Hardware kits. The monthly production capacity exceeds 2000 tons.
Hisener
Industrial Co., Ltd.
浙江海迅精密科技有限公司
Hisener is a leading manufacturer of top quality screws, both carbon steel and stainless steel. We offer a complete range of high performance screws, including timber screws, chipboard screws, drywall screws, terrace screws, self-drilling screws, selftapping screws, machine screws, etc. Hisener, a reliable, supportive, innovative and loyal business partner, definitely is your best choice.
86-13819084509 simon@hisener.com www.hisener.com
Hangzhou Lizhan Hardware Co., Ltd.
杭州力展五金有限公司
Started in 2007, with more than 10,000 square meters of workshop and package warehouse, we offer screws for composite deck, windows, concrete, wood, furniture, steel pipe, roofing and customized items. Monthly production yield is more than 2,000 tons, and we are increasing day by day. We sincerely hope for your cooperation and trust.
KINGPLUSE, ISO9001:2008 certified, is a professional manufacturer and exporter of screws, bolts and nuts, as well as an exporter of a wide range of industrial and constructive fasteners. Main products are self-driling screws, roofing screws, hex head bolts, and customized products.
UNI-PROTECH WAS FOUND IN 1992, AND ESTABLISHED CHINA BRANCH IN 2010. OUR PRODUCTS ARE USED IN THE FIELD SUCH AS AUTOMOTIVE, SOLAR PANNEL, EV, MINING, CONSTRUCTION, ETC. WE PROVIDE ONE-STOP SOLUTION FOR YOUR FASTENERS NEEDS. OUR LAB IS ISO17025 CERTIFIED AND WHOLE GROUP IS ISO9001 CERTIFIED TO ENSURE OUR PRODUC QUALITY AND RELIABILITY.
We are specialized in producing and exporti ng fasteners according to the standards of DIN, ANSI/ASME, ISO, BS, etc. Our produc ts are mainly Hexagon nuts, Flange nuts, Co upler nuts, Nylon nuts, U-Bolts,and so on.
Founded in 2000, Zhejiang Xianchuang covers an area of 22,000 square meters and is a wellknown manufacturer in the auto parts industry. The company has equipped itself with advanced domestic and international production and testing equipment, and a one-stop production chain including material restructuring, molding, machining, modulation, and surface treatment, as well as a mature integrated packaging and storage system. The company has passed ISO9001 international quality system certification and IATF16949 quality system certification and has its export right.
Grand Metal produces self-clinch nuts, standoff, studs equivalent to PEM standard, rivet nuts, weld studs, cage nuts, brass inserts and customized parts for CNC and cold forging, 200 millions stock, 5000+ items, PPAP and IMDS for automotive industry, IATF 16949 certificated . Most quotation can be obtained within 24-48 hours, with samples usually available within one week.
The company always works faithfully, professionally and people oriented to increase the quality of products constantly and create famous corporation. Products: DIN985 DIN982 ANSI BSF NYLON LOCK NUT, DIN1587 CAP NUT, DIN6923 etc.
Shanghai Fast-Fix Rivet Corp. is a Chinese leader in Blind riveting systems. We have two rivet factories We are ISO9001 and IATF196949 certified, with 80% products exported to worldwide. We offer a comprehensive line of blind rivet, including open type blind rivets, closed-end rivet, multi-grip rivet, tri-fold rivet, peel type, grooved, and high strength structural rivets.
Established in 2006, it specializes in the production of fasteners for sheet metal riveting applications. The products are mainly used in industries such as communication cabinets, instrument cabinets, energy storage equipment, medical equipment, household electrical appliances, automobiles, and highspeed railways.
Rivets & Self-clinching
Hardware
86-13510980258
Youk@szlangu.com www.szlangu.com
Shanghai Shangdian Washer Co., Ltd.
上海上垫垫圈有限公司
Shanghai Shangdian Washer Co., Ltd. is a washer manufacturing company located in Shanghai, China, established in the early 1960s.
We specialize in producing all types of washers, including flat washers, wave spring washers, spring lock washers, deformed washers for automobiles, square taper washers, square hole washers, conical spring washers, serrated lock washers, toothed lock washers, round washers, and plastic washers. We can utilize any material, ranging from Aluminum and Brass to Titanium and Viton, in accordance with DIN, BS, ANSI, ASTM, JIS, and NF standards.
Established in 1983, SRC specializes in BLIND RIVETS, BLIND RIVET NUTS, & RIVETING TOOLS manufacturing.
We can manufacture 6 billion blind rivets that meet DIN 7337, IFI and ISO standards annually – production power that most competitors simply can't match. We also produce up to 2 million high-quality riveters annually, leaving no doubt that we can cover your largest, most demanding orders. For more details, visit our website today.
Zhongshan city chehan hardware products co., ltd. Was established in 2002, the factory is located in No. 10-3, Baofeng East Road, Xiaolan Town, zhongshan city, guangdong province. Specializing in the production of various rivets and fasteners, from Taiwan imports more than 40 rivets and screws heading mechanical equipment, the monthly production capacity of 200 tons.We have 20 years of strong professional development technology, advanced imported production equipment and precision testing instruments, dedicated to provide customers with quality products and excellent services.Our products are exported to Asia, Africa, Europe, Oceania and North America.Welcome to contact and cooperate with us.
+86-760-22284520 james@chfastener.com chfastener.chinafastener.com www.chfastener.com We chat/Whats app/Telegram:+86-13809682476
Founded in 1988, YNK is one of the most reliable manufacturers of washers and high strength threaded rods with production capacity reaching over 2,000 tons/month. Our company is capable of manufacturing all types of standard and customized carbon steel washers, DIN976/B7 threaded rods. Our company is certified according to ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and EN14399-1:2015.
Suzhou Baisiwei Hardware Co., Ltd.is one professional fasteners company, established in Suzhou City, China since 2008. We supply a wide range of fasteners. It includes both standard and customized washers, nuts, bolts, threaded rods, anchors, screws, stamping parts, threaded plates and assemble parts in carbon steel, stainless steel, aluminum, etc.
Cargin Fastener Company is a manufacture of circlips,washers,rings based on many standards.With advanced machines and more than 20 year's experience, we provide our customers high-quality product,DIY package,reasonable price,on-time delivery and good service.Having customers from all around the world, we are here to wait for you.
86-13906641106 asher@cargin.cn www.cargin.cn
Dongtai QB Stainless Steel Co., Ltd.
东台市溱标不锈钢有限公司
Dongtai QB Fasteners Factory (Dongtai Qindong High Strength Standard Factory) was founded in 1976, dedicated to the manufacture of stainless steel fasteners. It can produce all kinds of high quality products such as bolts, nuts, screws, drawn wire and other off-standard fasteners.
"It takes months to earn a customer and seconds to lose one..."
Sunrise is one such company that understands this. Therefore, we offer high-quality products while ensuring customer satisfaction and longterm customer relationships.
Our company specializes in automatic elevators, automatic packaging machines, and other equipment. We provide standardized production, a complete range of varieties, diverse specifications, as well as diversified customized services. Welcome to consult with us!
86-13829295012 385324878@qq.com www.dgyaolin.com
Equipment
Stainless Steel Fastener
Jiashan Sanyung Electric Furnace Industry Co., Ltd.
嘉善三永电炉工业有限公司
San Yung is a professional manufacturer of high-quality heat treatment machines. Since its establishment in 1970, San Yung's brand has been affirmed by all of our customers.
Now we mainly have products such as: applications for continuous bright carburizing (tempering) quenching furnaces, continuous hot blast non-oxidation annealing (spheroidizing) furnaces, etc.
If you're looking for something efficient and reliable, our product is definitely worth considering. We continuously innovate our products based on customer feedback to stay ahead of the curve.
Our headquarter was established in Taiwan in 1973, with the branch set up in China in 2001, with experiences spanning more than 50 years in serving thread rolling machines to the customers worldwide. The external diameter of thread rolling machines varies from 1mm to 38mm, with length up to 600mm.
Chaoyue Mould is a professional screw and bolt mould manufacturer. The company has a production workshop covering an area of 7200 m². In addition to mould manufacturing, we also produce some drywall screws and chipboard screws.
Main Products:
Header punches (second punches), Carbide dies, First punches, Trimming dies, Thread rolling dies, Wire drawing dies, K.O. pins, Drywall screws, and Chipboard screws.
86-18631721110 hbcymj@qq.com www.chaoyuemould.com Die
Kunshan Datong Precision Dies Co., Ltd.
昆山大同精密模具有限公司
Kunshan Datong Precision Dies Co., Ltd., founded in 2005, is a technology-oriented enterprise focusing on the manufacturing of cold heading dies and accessories. The company owns more than 6,000 square meters of production plants, and more than 70 sets of production and processing equipment. The company has more than 50 employees, and the core staff has nearly 30 years of industry experience.
JunGu produces high-quality moulds with advanced production and testing equipment such as +GF+ Slow Wire Cutting Machine, MAKINO Electrical Discharge Machining, and Mitutoyo Coordinate Measuring Machine. It has adopted ERP management software to optimize the production process and form a unique processing system, providing customers with high-precision, fast delivery, and high-level moulds at competitive prices, ensuring stable and efficient production for customers.
Handan Feite Metal Products Co., Ltd. 邯郸市飞特金属制品有限公司
Ningbo ABC Fasteners Co., Ltd.
宁波联欣标准件有限公司
Dongtai QB Stainless Steel Co., Ltd. 东台市溱标不锈钢有限公司
Dongguan Yaolin Machinery Co., Ltd. 东莞市垚林机械有限公司
Jiashan Sanyung Electric Furnace Industry Co., Ltd.
嘉善三永电炉工业有限公司
Zhejiang Jiancai Machinery Co., Ltd.
浙江键财机械有限公司
Hebei Chaoyue Standard Fastener Mould Co., Ltd.
河北超跃标准件模具股份有限公司
Kunshan Datong Precision Dies Co., Ltd.
昆山大同精密模具有限公司
Haiyan Jieng Beeing Metal Products Co., Ltd.
海盐精斌五金制品有限公司
Jiangyin Tengma Standard Tools Co., Ltd.
江阴市腾马标准件工具有限公司
For advertising inquiries, please contact editor@chinafastener.com or 86-18688878737
广告刊登请联系editor@chinafastener.com或86-18688878737
Chairman
Yang Junfeng / yangjf@luosi.com
Chief Editor
Kelly Yuan / Kelly@chinafastener.com
Deputy Editor
Hailey Ruan / hailey.ruan@chinafastener.com
Graphic Design
Wu Likui / wulk@luosi.com
Review
Gracie Wang / editor@chinafastener.com
Disclaimer
The Publisher cannot be held responsible or liable for errors or omissions, during input or printing of any materials supplied or contained herein. The Publisher also cannot be held liable for any claims made by advertisers. The opinions expressed are not necessarily those of the Editor or the Publisher. The advertisers should be responsible for authorization of copyright of any materials provided.
Copyright
All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means without the prior permission of the publisher. Annual subscription (4 issues) to non-trade and outside China is USD99.00.
We kindly invite submissions for consideration to editor@chinafastener.com
