Quarter 2, 2021
IndustrialMachineryDigest.com
ENHANCING COBOT CAPABILITIES Universal Robots Unveils Enhanced UR10e with 25% Greater Payload and Hirebotics Provides a Complete and Ready To Go Right Out Of The Box Cobot Welder Also this Quarter
» The Right Way to Diversify » Validating Inspections for Compliance vs. Non-Compliance » The Industrial Machinery Industry is Pivoting with Platforms like Alibaba.com » Robots for Rent » Reduce Waste and Recycle
DRILL. TAP. REPEAT. Engineered Tough for Year After Year Reliability
Experts in Automatic Drilling & Tapping Units and Multiple Spindle Heads
HYPNEUMAT.COM • 414-423-7400
WE LISTEN. WE OBSERVE. WE OPTIMIZE.
CLEAN AIR SOLUTIONS
STAY SAFE WITH DYNABRADE DUST CONTROL SYSTEMS
NEW MODELS!
RAPTOR VAC® VACUUM SYSTEMS n
n
For use on the most adverse applications, including aluminum, magnesium and titanium. Certified NFPA/CSA Listed Raptor Vac® Vacuum Systems available.
To learn more, scan code to visit our Clean Air Solutions microsite!
ABRASIVE POWER TOOLS AND PROCESS SOLUTIONS SINCE 1969
Dynabrade, Inc. | 1.800.828.7333 | dynabrade.com |
Table of Contents
COLUMNS:
20
8
BUSINESS 4.0 Robots for Rent Robotics as a Service (Raas) Market to Gain due to Adoption of Operational Intelligence and Data Analytics
10
SAFETY & MAINTENANCE Reduce Waste and Recycle Seco Tools Details How Data Matrix Codes Revolutionize Product Information Flow
FEATURES
16
NEW TECHNOLOGY Enhancing Cobot Capabilities Universal Robots Unveils Enhanced UR10e with 25% Greater Payload and Hirebotics Provides A Complete And Ready To Go Right Out Of The Box Cobot Welder
20
8
SPECIAL SECTION The Industrial Machinery Industry is Pivoting with Platforms like Alibaba.com
22 PROCESS
DEPARTMENTS
The Right Way to Diversify Manufacturers need the right tools and calculations to embrace new revenue streams By: James Thorpe, Product Manager at Sandvik Coromant
26
INDUSTRY INSIGHTS Validating Inspections for Compliance vs. NonCompliance
Exact Metrology Provides Scanning and Training to a Forging Company and a Machine Shop
16 4 | IMD | Q2 2021
6 FROM THE EDITOR 30 PRODUCT SHOWCASE 41 BUYERS GUIDE 52 SURPLUS BUYING AND SELLING 58 CLASSIFIEDS 59 ADVERTISER INDEX 60 PRODUCT INDEX
ON THE COVER The enhanced Universal Robots UR10e, retains the small footprint, intuitive programming experience, uncompromising repeatability, but Its greater payload takes more weight from the hands and shoulders of humans, leading to improved ergonomics and working conditions.
®
SAFELY
Lifts Up To 500 lbs! Ergonomic Portable Lightweight Meets OSHA & ASME Requirements
Customized Safety Lifting Devices For Any Application
The Sky Hook is your personal safety lifting solution, preventing lifting injuries while saving you both time and money!
800-4-SKYHOOK 800-475-9466 • 208-365-5770
www.skyhookmfr.com
From the Editor According to the latest U.S. Manufacturing Technology Orders report from the Association for Manufacturing Technology (AMT) while April saw a decline in orders from the previous month, compared to the same time last year, there was an increase of 72 percent. Thus far, even with a continued return to normalcy, total orders have reached a 40 percent increase compared to orders placed within the first four months of 2020, with a total of $1.57 billion spent on technology orders for the manufacturing industry. Douglas K. Woods, president of AMT, has described orders near the level that was seen back in 2018, and a resurgence of multi-machine orders at that. “Parts that would normally go to job shops are now being produced in-house by larger manufacturers with the means to increase their production capacity,” Woods says. “This is not to say production is shifting away from job shops; they are still operating at near capacity and increasing machine orders month over month, but increased consumer demand has necessitated more capacity, and confidence in the sustainability of that demand has justified the capital expenditure by large OEMs.” Both large and small manufacturers are seeing the need to grow and invest in the technology that is going to help meet their customer’s needs, which in most cases, had not ceased for many - even with the overall impact of various shutdowns in 2020. The report also indicated that the latest open houses for machine builders and manufacturing technology providers have had better than expected attendance. This overall confidence for in-person visits is another boost in terms of sales and even regular maintenance. SME just weeks ago announced the return of FABTECH to the halls of McCormick Place in Chicago this fall. But let’s keep in mind, it’s not just a return to normalcy that we need to be concerned with. The pivot towards digital means for connecting with companies and sourcing parts, products, and equipment in response to last year continues to provide options for business owners from the comfort of their own office or home. This quarter, Alibaba.com shares their insights on the importance of digital trade shows, and information on why Alibaba.com continues to grow as a source for B2B professionals worldwide. I think a hybrid model of in-person and digital shows will continue to be the norm for some time to come, and why not? What other time has there been when so many of us can keep in touch and find the solutions we are looking for anywhere in the world, and typically in real time? There’s no reason to think that the road to recovery will lead us to where we’ve already been. Until next time,
Nick Boliek
SERVING AMERICAN MANUFACTURERS FOR OVER
35 YEARS
William C. Strickland III, Publisher william.strickland@indmacdig.com 800-366-0676 ext. 103 | Fax: 866-826-5918
Russ Willcutt, Editorial Director russ@indmacdig.com
Nick Boliek, Editor nick@indmacdig.com 800-366-0676 ext. 104 | Fax: 866-826-5918
Shane Bell, Creative Director sbell@indmacdig.com
SALES
Lisa Hanschu, Sr. Account Executive lisa@indmacdig.com 785-965-9159 | Fax: 785-965-7199
Art Mazzone, Sales art@indmacdig.com 847-727-5744
William C. Strickland III, National Sales 205-903-9178 | fax 866-826-5918
Adrienne Gallender, Media Adviser agallender@indmacdig.com 888-407-7737
Susan Strickland, Accounting susan@indmacdig.com 205-542-1098 | Fax: 866-826-5918
Sarah Mayo, Interactive Specialist sarah.mayo@indmacdig.com 800-366-0676 | Fax: 866-826-5918
CIRCULATION & SUBSCRIPTIONS IMD, 3590-B Hwy 31 South, Suite 233, Pelham, AL 35124 circulation@indmacdig.com | Fax: 866-826-5918
REPRINTS To purchase article reprints please call 800-366-0676 ext. 103 or email wstrickland@indmacdig.com
source
360 media llc
A PUBLICATION OF:
Source 360 Media LLC 3590-B Hwy 31 South PMB #233 Pelham, AL 35124
Editor, Industrial Machinery Digest INDUSTRIAL MACHINERY DIGEST (ISSN 1542-5223) is published 12x per year by Source 360 Media. POSTMASTER: Please send change of address to INDUSTRIAL MACHINERY DIGEST, 3590-B US Hwy 31 South, PMB 233, Pelham, AL 35124. Printed in the U.S.A. SUBSCRIPTION POLICY: Individual subscriptions are available without charge in the U.S. to qualified individuals. Publisher reserves the right to reject nonqualified subscribers. Oneyear subscription to nonqualified individuals in the United States: $9600. Single copies available (prepaid only) $2000 each.
Alabama Automotive Manufacturers Association
6 | IMD | Q2 2021
REGISTRATION NOW OPEN Now accepting hotel reservations.
GEAR ELECTRIC FLUID POWER MOVING THE FUTURE.
At MPT Expo, you’ll see the full range of power transmission solutions, including hybrid solutions, utilizing mechanical power transmission, pneumatics, hydraulics, electric motors, and drives.
SEPTEMBER 14–16, 2021 AMERICA’S CENTER CONVENTION COMPLEX ST. LOUIS, MO
Your safety is our priority. Regular updates posted at MotionPowerExpo.com.
Formerly Gear Expo Owned by
Business 4.0
Robots for Rent Robotics as a Service (Raas) Market to Gain due to Adoption of Operational Intelligence and Data Analytics
G
lobal Robotics as a Service (RaaS) Market is projected to grow significantly owing to the high cost of deployment of robots. Deployment of robots requires huge initial one-time payment due to the equipment cost that comprises expensive sensors and software. Numerous end-users are adopting robotics as a service (RaaS) over deployment of robots due to the costly training of specialists. It encompasses maintenance charges in terms of upgrades, electricity, and servicing. The cost involved in the deployment of robots is one of the major reasons for the substantial growth of robotics as a service (RaaS) market. Robotics as a service (RaaS) is essentially a business model that allows end users to use specialized service robots and pay for the proficient services on hourly or monthly basis. This motivates the end users to adopt robotics services through the RaaS model. Besides the robotics services, the end users can also take advantage of technologies like cloud computing to improve their contributions via services like real-time robot monitoring. Robotics is widely used technology till date and have spread their spectrum in various industries and applications worldwide. From retailing to manufacturing and healthcare, robots perform almost every human activity competently with remarkable efficiency and speed. Spurring growth is observed in could-based storage, artificial intelligence, and computing. Owing to this growth, robots-as-a-service business models are attaining lot of traction globally, which ultimately stimulates robotics
8 | IMD | Q2 2021
as a service (RaaS) market. Robots as a service model offers largely customized business solutions that differ from customer to customer with numerous options and tasks. Their services are greatly reliant on high capacity and low-latency computing surrounding. Most manufacturing industries require heavy operational tasks in plants, warehouses, and distributional centers for robotics. RaaS involves a business model in which professional service robots are rented or leased on a monthly or hourly basis, along with upgradation, maintenance, and other basic services to end-users. Apart from renting the robots, vendors also leverage technologies such as cloud computing to enhance their offerings through services, such as real-time remote monitoring of robots. For more information, visit www.radiantinsights.com
THE RUDACP-TURNADO: LIFTING REINVENTED.
■ MADE ■ IN
■ GERMANY
A lot can go wrong when lifting heavy loads. If the suspension ring doesn't align into the direction of the force immediately, it can get stuck and has to withstand high transverse loads. If the lift ring then aligns suddenly, it may cause damage to the load, to lifting gear and the crane system. The RUD ACP-TURNADO is the world's first smart lifting point. Thanks to its unique spring mechanism, it doesn't jerk to a stop and therefore sudden kinking is impossible. What comes along: it offers significantly higher working load (WLL) capacities than other centric lifting points of a comparable size. Thanks to the RUD ICE-BOLT tech nology and to the optimized design, its bending resistance is unrivaled. The new RUD ACP-TURNADO: Lifting reinvented.
RUDRFID/a:\. CONNECTIT �
Rockford, IL 611091Toll Free: 800-628-4263 I Phone: 815-229-56671 Fax: 815-229-56861contact@caldwellinc.comIwww.caldwellinc.com
Safety & Maintenance
Reduce Waste and Recycle Seco Tools Details How Data Matrix Codes Revolutionize Product Information Flow
W
hen Jan Gravningsbråten came up with an idea for how to reduce waste in the tool production process, little did he realize the potential effect it could have on the Seco business. Several years later, his idea has the ability to track ten billion tools that in turn can generate huge amount of insight into how our products are used. Back in 2018 Jan, who is an R&D technician in the Innovation Lab in Fagersta, noticed that when faults occurred in the production process, it was impossible to identify the individual tools that were affected as each tool was only identifiable by a batch number. “You could have 10,000 or 20,000 in a batch and it was impossible to work out which ones might have been affected by a production fault, so we’d have to start all over again. That’s not really economically viable,” Jan says.
Individually Identifiable The challenge was to find a way to make each tool individually identifiable, and that’s when the lightbulb went on for him – data
10 | IMD | Q2 2021
matrix codes, which are similar to QR (quick response) codes. “We have chosen a series of ten billion numbers for our codes, and we can fully trace each tool marked with them using software where we collect all the codes from the machines that produce the tools,” Jan explains. Originally invented in 1987, data matrix codes are two-dimensional codes often used to track objects in industrial processes. The codes are put on each Turbo 16 tool, one of the most popular tools in the Seco Tools range, using a laser-printing process. Putting data matrix codes on each tool deployed out in the field will in the future allow both customers and Seco Tools to track it through its working life. The codes are also compatible with the Seco Assistant, an app which contains a wealth of useful information for clients and that allows them to make calculations and scan their tools directly to find out more about them. “Ideally, clients would input data about how they use the tool into the system – what machine they use, when it is installed, how long it is used for and for what purpose. Scanning
CUT IT
ON A COSEN 704.943.1030 www.cosensaws.com
the codes on the tool would then bring up all that data, which basically is the life story of the tool,” says Micael Baudin, specialist in digitalization at Seco Tools.
Laser-Printed Codes Together with Jan and a small team, they found a way to use lasers to print the codes on tools. “The vision is to be able to support the customer if there is a problem using the tool in certain ways – we can see what it has been used for in the past and based on that we can try to find a solution to their issue, no matter where they are in the world,” says Jan Gravningsbråten. Data collected from these tools can then be fed back into the R&D process, improving the next generation of products. “If the data matrix codes are still readable they can be used to sort products that are returned to us, which makes the process of recycling much easier. We will be able to sort the different metal compounds quickly so that we can re-use as much of them as possible, which is a real plus when it comes to our sustainability work,” Jan continues. “So far, we have used the idea with one product, and we are ironing out the teething problems, but ideally we would like to see a situation where customers agree when buying products from us that they will return them to us at the end of their useful lives. When they do so, we can scan these codes and see what has happened to them in their lifetime,” Micael Baudin says. For Jan Gravningsbråten, the biggest benefit is to be found in the sustainability aspect of the project. “Imagine if we could say to a customer that they had to send the tools back to us when they were finished with them – there might even be a situation in the future where they are not allowed to simply dump old tools and that they are required to recycle them. “There are a lot of benefits, being able to help customers immediately, but the automizing the recycling process and being able to sort different metals and coatings using this data matrix could quickly change things for the better,” Jan says.
12 | IMD | Q2 2021
Digital Solutions The use of the data matrix codes has huge potential in terms of transforming how Seco Tools does business. “I see many opportunities based on this technology for future digital solutions, solving pain points and increasing productivity, both in Seco Tools as well as at our customers,” says Thomas Norström, Senior R&D Manager. “To make our products smarter by connecting information to each individual item throughout the whole product life cycle will make a difference - our smart products will be able to answer questions like who are you, where do you come from, how should I use you and how have you been used.”
Bar Pulling Made Easy
www.accudyneproducts.com • ONE TIME SETUP • AUTO ADJUST BY CHANGING “X” VALUE IN PROGRAM • EZ-RANGE • .093” – 2.000” ROUND STOCK • .125” – 1.375” HEX STOCK • .125” – 1.000” SQUARE STOCK Your time is too valuable to
be adjusting a bar puller!
303-991-1500
The use cases on the data matrix technology will be part of a bigger initiative called Seco Beyond Hardware, and Thomas will step out of his present role as Senior R&D Manager and step into a role as program manager for Seco Beyond Hardware. “I am really excited about this, to be able to follow and support all these exciting solutions all the way, from ideas to products implemented internally or at our end customers, will be very enjoyable,” he says.
Recycling Is Key to An Ambitious Target For Circular Economy Seco Tools is uniquely placed to make a strong contribution to the circular economy, which prioritizes separating economic activity from the consumption of finite resources and designing ways to remove waste from our system of economic activity. Though it is by no means the only aspect, recycling plays a vital role in the circular economy by asking us to look at how we use the earth’s scarce and finite resources, and what can be done to ensure that we extract maximum value and usage from them. Recycling will play a key role in reaching Seco Tools ambitious goal of being 90% circular by the year 2030, with a number of broad changes to processes and business models leading the way. “It’s a challenging target, but we see this as very important for our company and our business,” says Ted Forslund, Sustainability & Audit Coordinator at Seco Tools. “What is good for Seco Tools is that we already have very good recycling processes, so now it’s about creating a good partnership with our clients so that they understand the value of us buying back tools, so that it becomes a closed circle where nothing goes to waste.” Globally, only 8.6% of the resources we use are recycled, which means that over 90% of everything is used once and then disposed of. Due to the nature of the business of Seco Tools, the company is in a strong position to change that paradigm by buying back tools that have reached the end of their productive lives and recycling or repurposing them into new tools. “If we increase that kind of trade where we buy back old and get customers to understand the advantages of it, we can reduce the climate impact as we won’t need to use new materials and metals. It’s a win-win in many ways,” says Ted Forslund. There is an ever-growing awareness of environmental concerns, and suppliers and customers are keen to see initiatives that address them. “This has proved very positive so far with customers. They know that the tools we produce using recycled materials are of the same very high standard, that there is no drop-off in quality. There is now also a market for the buy-back of tools that have reached the end of their useful lives, and that is a positive thing for them too. It’s about getting this into our business relationships in a positive way,” Ted Forslund explains. In a circular economy recycling is very important, but it is also the last thing we should do after we reduce, repair and reuse. “This is one important component, but there are other aspects to the circular economy, and we have to look at them all. One of those is the lifecycle of our products – how can we design them so that they last a little longer, and that they can be recycled when they do reach the end of their useful lives? How can we produce them using
14 | IMD | Q2 2021
renewable energy and sustainable supply chains? The essence of the circular economy is preserving the value that we have already created,” says Ted Forslund. Recycling helps in terms of minimizing waste, but it is far from the only way to do so. There is a wide range of areas that can be analyzed with a view to stopping the “leakage” of valuable resources – delivery chain logistics, sorting, warehousing, risk management, power generation, and even molecular biology and polymer chemistry. Cost-efficient and better-quality collection and treatment systems and effective segmentation of end-of-life products will enable Seco Tools to support the economics of circular design. One of the main problems in addressing issues to do with the environment and climate change has been the sheer scale of the task, but Ted Forslund believes that the Seco Tools goal of 90% circular by 2030 is attainable. “It is essential to work with our suppliers and customers in order to take on the global challenge. If we do, we can create more value with less waste within a safe operating space for our planet—again, it’s a win-win situation,” he concludes.
ABOUT SECO With its origins in Fagersta, Sweden and present in more than 75 countries, Seco Tools is a leading global solution provider of metal cutting solutions for indexable milling, solid milling, turning, holemaking, threading and tooling systems. With the hands-on application advice of Seco Tools, the company drives excellence for more than 80 years throughout the entire manufacturing process of manufacturers by ensuring high-precision machining and high-quality output. For more information on how Seco innovative products, expert services, knowledge and experience bring success to manufacturers across all industry segments, please visit www.secotools.com
SHEARS & PRESS BRAKES Hydraulic Shears:
1/8” (10GA), 3/16”, 1/4”, 3/8”, 1/2”, 5/8”, 3/4”, 1” and 1-1/4”
Press Brakes:
Since 1972
50-Ton to 550-Ton
C-Frame Presses:
40-Ton to 200-Ton
Custom Designs:
for Custom Applications
Retrofit Backgauges:
for Shears and Press Brakes. Made to fit most machines with minimum modifications.
Precision Knife Sharpening
Phone: 319-435-2378 | Fax: 319-435-2262 | sales@betenbender.com | www.betenbender.com
CALL FOR A FREE CATALOG!
New Technology
Enhancing Cobot Capabilities
Universal Robots Unveils Enhanced UR10e with 25% Greater Payload and Hirebotics Provides A Complete And Ready To Go Right Out Of The Box Cobot Welder
U
niversal Robots (UR) is launching an enhanced UR10e with an increased payload of 12.5 kilogram (27.55 pounds), creating new possibilities for applications such as palletizing, machine tending, and packaging. The robot’s price remains unchanged. “Universal Robots is committed to continuous improvement based on meaningful conversations with customers and our ability to address critical market opportunities. Our customers have already deployed UR cobots on a wide variety of palletizing applications. Over time, they have identified opportunities to utilize our UR10e cobot in handling tasks with heavier items,” says Kim Povlsen, President of Universal Robots. “In response to this demand, we have enhanced the UR10e to support greater payloads, providing customers with exciting new deployment capabilities.”
16 | IMD | Q2 2021
The enhanced UR10e retains the small footprint, intuitive programming experience, uncompromising repeatability, commitment to quality, and trusted performance that Universal Robots customers have come to expect, but its increased payload capacity means that users can now do more: » The UR10e can now be used in palletizing applications with cartons weighing up to 10kg and a 2.5kg gripper. » The UR10e is now more versatile for other material handling tasks, too, such as loading and unloading heavier workpieces in machine tending deployments and packaging of heavy items. » The enhanced UR10e’s greater payload takes more weight from the hands and shoulders of humans, leading to improved ergonomics and working conditions. With overexertion and repetitive motion accounting for an estimated 24% and 8% of
IMD – The Industry’s Most Extensive Industrial Publication
workplace injuries respectively in the U.S. alone, this provides significant relief to human workers. “Humans are not designed to lift heavy goods repeatedly, but our cobots handle these tasks with ease. By taking over unergonomic activities, UR cobots boost productivity, improve product quality, and help businesses rethink how to best use the creative and problemsolving abilities of their workforce –all while keeping people safe,” says Kim Povlsen. Feedback from UR partners has been extremely positive; MBO Postpress Solutions in Germany has integrated the UR10e as part of its CoBo-Stack stacking cobot. “Increasing the payload of the UR10e will make our MBO CoBo-Stack much more profitable for our customers by expanding their application possibilities to include larger packages and heavier products, such as perfect bound or saddle stitched catalogues and brochures,” says Sebastian König, head of research and development at MBO Postpress Solutions GmbH. In addition, the updated UR10e also provides plug-and-play compatibility with products from Universal Robots’ UR+ ecosystem of hardware and software peripherals, ensuring that users can quickly and easily get started with collaborative applications. Nicolas Lauzier, Senior Product Manager at Robotiq comments: “The greater payload of UR10e makes a big difference to palletizing applications by enabling users to handle loads up to 12.5kg in weight. And with percent automation potential, it also Modex 8in25 x 4.75in Ad greater Amanda.pdf 1 13/02/2020 17:33
SAFETY | STORAGE | EFFICIENCY 877-COMBI-56
COMBILIFT.COM
C
M
Y
CM
MY
CY
CMY
K
Save up to 100% more storage
Before you invest in upgrading the infrastructure of your warehouse find out how Combilift could dramatically increase storage, improve productivity and enhance safety.
Our warehouse design consultancy service is FREE and without obligation. When combined with our material handling products we can deliver possible space savings of up to 100%. So contact us today to arrange a virtual site survey! INDUSTRIAL MACHINERY DIGEST.COM
IMD | 17
means that the UR10e can help whenever there is a single line that needs to palletize a wide range of products of different weights.” Orders can be placed with UR distributors globally now, with shipments of the new UR10e scheduled to start in the second half of June.
Advanced Robot Welding Via Easy-to-Use Smartphone Application Hirebotics’ Cobot Welder, Powered by Beacon™, is a complete, user-friendly collaborative robot welding system that enables painless automated welding deployments. “The Cobot Welder is a major leap forward in easy-to-use welding automation that combines industrial grade robot welding functionality with consumer level ease-of-use and a phenomenal price point,” says Rob Goldiez, Cofounder and CEO, Hirebotics. At the online launch event, held this past April, included a demo of the Cobot Welder system in action and a live Q&A session, providing attendees with an opportunity to see how easy it is teach new parts and welds using the ingeniously simple Cobot Welder cellphone application that runs on Hirebotics’ cloud-based Beacon software platform. Beacon, which Hirebotics launched in 2020, is a UR+ certified, powerful platform for cobot application building and remote cobot monitoring, maintenance and 24/7 global support. Complete and ready to go right out of the box, Cobot Welder provides all the hardware and software required to get started on an automated welding deployment, including: a UR10e collaborative robot, a Miller Invision 352 MPa cobot package, a Tregaskiss
18 | IMD | Q2 2021
robotic torch, a mobile cart with a standard 5/8” diameter on 2” center hole pattern, and Hirebotics’ ingenious Cobot Welder smartphone application. With Cobot Welder, Hirebotics has managed to eliminate the pain points from robot welding system deployments. At the heart of the system is our Cobot Welder smartphone app, which
turns welders into robot programmers in a matter of minutes, no pendant required,” says Mitch Dupon, Director of Business Development at Hirebotics. “By reducing the time taken to teach new parts by as much 60 percent, Cobot Welder reduces downtime, improves welding quality and productivity and ensures painless automated welding deployments. I’m excited to talk about this and the other productivity benefits provided by Cobot Welder at the forthcoming launch.” Joining Dupon at the launch event is Joe Campbell, Universal Robots’ Senior Manager of Applications Development & Strategic Marketing, North America. Campbell is a 40-year robotics industry veteran and an expert in collaborative robot deployments. “The welding profession is experiencing a labor crisis. The average age for skilled welders is 55, most are likely to retire within 10 years, and younger people aren’t entering the profession in sufficient numbers to sustain industry demand,” he says. “There is an urgent need for collaborative welding systems that are safe to use around human beings and can be used to support expert human welders by taking over the tedious and unergonomic aspects of the welding process,” says Campbell, who encourages small to medium size businesses in particular, to attend the launch event and check out the demo of the Cobot Welder system in action.
For more information, visit www.universal-robots.com
ABOUT HIREBOTICS Founded in 2015, Hirebotics is a cobot technology developer headquartered in Nashville, Tennessee. Hirebotics designs and develops tools designed to improve the productivity, usability and affordability of collaborative robot systems. Hirebotics entered the welding automation space as a key collaborator in the development of the popular BotX
WATCH VIDEO BELOW
cobot welding system. In 2020, Hirebotics launched Beacon, a powerful free platform with cobot application building, remote cobot monitoring and maintenance, and 24/7 global support functionality. (For use after the launch event: In 2021, building on its previous cobot welding technology development experience, Hirebotics launched Cobot Welder, Powered by Beacon; a complete software and hardware package for collaborative welding deployments.) For more information, visit www.hirebotics.com
ABOUT UNIVERSAL ROBOTS Universal Robots (UR) was founded in 2005 to make robot technology accessible to all by developing small, user-friendly, reasonably priced, flexible collaborative robots (cobots) that are safe to work with. Since the first cobot was launched in 2008, the company has experienced considerable growth with the user-friendly cobot now sold worldwide. The company, which is a part of Teradyne Inc., is headquartered in Odense, Denmark, and has regional offices in the United States, Germany, France, Spain, Italy, UK, Czech Republic, Poland, Hungary, Romania, Russia, Turkey, China, India, Singapore, Japan, South Korea, Taiwan and Mexico. In 2020, Universal Robots had a revenue of USD 219 million.
The Sky Hook is your personal safety lifting solution, preventing lifting injuries while saving you both time and money!
800-4-SKYHOOK 800-475-9466 • 208-365-5770
www.skyhookmfr.com
INDUSTRIAL MACHINERY DIGEST.COM skyhook-q-video-ErgSafety-03-2021.indd 1
IMD | 19
3/19/21 9:45 AM
Alibaba.com
The Industrial Machinery Industry is Pivoting with Platforms like Alibaba.com B2B ecommerce is giving industry access to global premium suppliers online to make sourcing more efficient through events like the Alibaba.com Online Trade Show | Summer edition
T
he global machinery industry—spanning food and beverage manufacturing machinery to plastics machinery—was hit hard by the Covid-19 pandemic and is likely to see lasting changes. Severe supply chain interruptions and manufacturing delays have led to difficulty sourcing inputs. Even so, the industry is expected to grow from $535 billion globally in 2020 up to $794 billion in 2025, as companies adapt their operations to a post-pandemic world by making changes like adopting automation and the industrial internet of things (IIoT) and focusing on B2B ecommerce. There will be certain lasting changes in the industrial machinery industry to mitigate future supply chain disruptions and adapt to a digital-first approach. Building a flexible and efficient supply chain will be a top priority for manufacturers to avoid future severe disruptions. What happens next for businesses that suddenly found themselves surging and for those that are in recovery will depend on how fully and rapidly they embrace B2B ecommerce and digital channels.
How the B2B Ecommerce Boom has Changed the Game Once nice to have, ecommerce is now a must-have, offering businesses access to more markets and global supply, greater operational flexibility, and the resilience to survive and thrive during challenging times. Traditionally, B2B companies have relied on building their supplier relationships face-to-face at trade shows and in factories and offices. With travel and in-person meetings restricted because of the pandemic last year, buyers and sellers were forced to tap into the value of digital tools. Now, 93% of U.S. companies are doing some portion of their B2B business online, and 43% are using ecommerce, according to an Alibaba.com study. Digital capabilities made all the difference for many businesses last year, serving as a lifeline to rapidly adapt to new and unprecedented social distancing norms. Going digital helped businesses across the country reimagine their operating models overnight, reach new customers and mitigate interruptions by diversifying their supply chains and supplier base. Shifting to digital has also given businesses key data and insights into customer habits and needs. The industrial machinery industry is no exception with
20 | IMD | Q2 2021
ecommerce driving the market forward as millions of consumers and customers shifted from shopping in-store to buying online for delivery or curbside pickup. Going forward, one thing is clear: ecommerce is here to stay.
Why Industrial Machinery Companies Put Their Trust in Alibaba.com As one of the world’s largest online B2B and wholesale marketplaces, Alibaba.com connects millions of business buyers with suppliers of all sizes across more than 200 countries and regions, offering a suite of powerful tools built specifically for B2B trade. Business buyers and procurement professionals can discover new products and manufacturers and place orders efficiently and securely with end-to-end trade enablement features, and sellers are able to reach global demand for their products. With Alibaba. com, companies can: » Expand their footprint. The inherently global nature of the more than 200,000 suppliers on Alibaba.com allows buyers to grow their supplier base digitally without the need to travel. Time zones become unimportant, allowing business discovery and communication 24/7. According to an Alibaba.com survey of U.S. B2B companies, the top benefits of online sourcing cited by buyers include finding suppliers more quickly (53%), reducing the need for travel (44%), greater purchasing power (38%), and higher profit margins (38%). » Optimize shipping efficiencies. Buyers can place large orders with international sellers to take advantage of transparent, reliable, and cost-effective shipping and logistics services, simplifying the entire process. Intelligent algorithms recommend the best routes, and multiple freight forwarders and carriers are available to ensure end-to-end transparency and real-time tracking. » Source securely from around the world. Alibaba.com supports over ten major global payment methods and more than 50 currencies worldwide. To reduce the risk of global trade, buyers who purchase on the Alibaba.com platform can use the free proprietary order protection escrow service, Alibaba.com Trade Assurance. Through Trade Assurance, if anything goes wrong, such as issues with quality or shipping delays, Alibaba.com will assist in reaching a satisfactory outcome, including getting your money back.
IMD – The Industry’s Most Extensive Industrial Publication
» Access trusted suppliers. To help business buyers source efficiently and screen for quality, the “Verified” logo will appear alongside professional suppliers that have been verified by independent third parties for industry-specific qualifications and services. When searching for product details or through company profiles, buyers can see these suppliers’ strengths like corporate qualification, product qualification, and corporate capabilities. To make it even easier, Alibaba.com recently launched an always-on Elite Partner Event where buyers can find high-quality products and suppliers in one place. This vetted group of global suppliers features innovative, new technologies and products in a variety of categories to help enhance your competitive edge. In the industrial machinery space, Alibaba.com Verified Supplier and Elite Partner Leapion has been a leader in developing and manufacturing high-powered laser equipment. Leapion is a highly-trusted and experienced supplier that produces laser cutting equipment, laser engraving machines and other industrial laser equipment like CNC routers. The company sells products to more than 30 countries and regions around the world, and their 220 employees are integrated across R&D, production, sales and after-sales. Leapion provides one-to-one customization for customers of all sizes with a professional design team dedicated to working with customers to produce small batch, flexible custom orders to serve the industrial machinery industry.
Alibaba.com Online Trade Show | Summer: Premium suppliers. Efficient sourcing. Trade shows have been an incredibly valuable channel for B2B businesses to discover new, high-quality suppliers like Leapion and products and drive their bottom line. While in-person global shows are still on hold, Alibaba.com has been hosting a series of online trade shows that have resulted in tens of thousands of new connections. Alibaba.com Online Trade Show | Summer kicks off on June 14 and lasts through June 27 and will feature Leapion and other Elite Partners as well as more than 10,000 premium suppliers across a spectrum of 30-plus categories. “The Alibaba.com Summer Online Trade Show is a two-week event available 24/7 on the Alibaba. com platform, where business buyers and sellers from around the globe can meet and do business with one another from the safety and convenience of their homes and offices,” said John Caplan, President of North America and Europe, Alibaba.com. “Our new Online Trade Show experience
makes it even easier for professional business buyers to connect and collaborate with premium suppliers, so that they can source more efficiently, effectively, and with ease.” Benefits of the experience will include: » Premium connections. Buyers can easily reach out to selected suppliers with outstanding products and services, from R&D and tailor-made design to customer service and order fulfillment. » Exclusive VIP pavilion access*. For the most efficient experience possible, there will be a dedicated “VIP Pavilion” where the top one percent of Alibaba.com buyers can meet and negotiate directly with managers rated four stars and above from more than 1,000 suppliers. » Cutting-edge industry insights. Businesses will be able to hear from Alibaba.com leaders like John Caplan, President, North America & Europe, and Flora Yan, Head of Integrated Marketing as well as Dirk Kowslowski, Director of IFA, Kai Hattendorf, CEO of Ufi and learn from successful buyers and sellers on Alibaba. com during the trade show opening ceremony. In-depth industrial reports filled with data and trends from Alibaba.com will also be available. » Pro Buyer Discounts*. Businesses who have upgraded to Pro Buyer status on or before June 27 can receive a US $100 coupon to use on Alibaba.com.
Attend the Show The event kicks off on June 14 with a session on the Future of Events, and businesses in the industrial machinery industry can attend Alibaba.com Online Trade Show | Summer through June 27, here. High-quality suppliers are just a click away. *Available to qualified Pro Buyers. Find out more here.
INDUSTRIAL MACHINERY DIGEST.COM
IMD | 21
Process
Choosing the “right” drill normally means a tool that perform for longer and produce better quality holes, particularly in tough materials.
The Right Way to Diversify Manufacturers need the right tools and calculations to embrace new revenue streams By: James Thorpe, Product Manager at Sandvik Coromant
T
here will be a “next normal” for manufacturers in the wake of COVID-19 — that’s according to a report published by McKinsey & Company. With losses of revenue in some sectors while others experience unexpected spikes in demand, the crisis is forcing manufacturers to diversify. McKinsey & Company’s COVID-19: Briefing note report predicts manufacturers can expect “lasting shifts in customer markets” and that resilience will be needed if manufacturers are to “to navigate an economically and socially viable path.” In other words, they must diversify to survive.
22 | IMD | Q2 2021
Fortunately, today’s engineers are well-versed in mixed production, and most have evolved far beyond the low-tech stereotype of “Fred in his tool shed”. That said, diversifying production is not without it challenges. Choosing the right tooling solution is essential for facilitating changes in production. This is particularly essential for engineers that work with tough materials like duplex stainless steels, Inconel or heat resistant super alloys (HRSAs) and companies that work with multi-materials. Operations like this require optimized tools with carefully calculated cutting data. Drilling tools are a prime example. Drill
IMD – The Industry’s Most Extensive Industrial Publication
penetration rates can typically vary from 50 to 1000 millimeters-perminute. For these tools, precise calculations are vital for avoiding poor tool life and, at worst, causing premature tool failures. Put simply, if component material is changing, then drilling cutting data will have to change.
A Tool For All Materials What do we mean when we say “the right” tool? With drills, this normally refers to tools that perform for longer and produce better quality holes, particularly in tough materials, like Inconel. Sandvik Coromant has developed a range of CoroDrill® 860 solid carbide drills with optimized geometries suited for different applications that involve tough, difficult materials as well as malleable, abrasive, and soft materials typically found in the ISO-K and ISO-N families. The range includes the CoroDrill 860-GM with enhanced -GM geometry, optimized for multi-materials and applications. Other tools in the range, like the CD860-PM, are optimised for drilling ISO-P steels. The CD860-SM is optimized for ISO-S materials for aerospace parts manufacturing. The CD860-GM is particularly useful for general engineering with mixed-materials, where productivity is important and engineers seek to diversify their production. The CD860-GM’s innovative, polished flute design improves the evacuation of chips and yields greater hole quality. It is made from a unique fine-grained carbide substrate that increases hardness while maintaining toughness. In addition, the drill is tip-coated with a multi-layer physical vapor deposition (PVD) thin film coating, which is key to improving the drill’s productivity and tool life. This was put to the test by an automotive engineering company in South Korea. The company used the CD860-GM to machine a transmission connector in ISO-P material, then compared its performance with a competitor’s drill on the same component. The cutting data used was a cutting speed (Vc) of 100 m/min, a cutting feed (Fn) of 0.21 mm/rev and a drilling depth of 10 mm. In the end, the customer reported a 1,150% increase in tool life with the CD860-GM.
Going Online Productivity advantages, like those demonstrated in South Korea, could be crucial in helping manufacturers to diversify their production while remaining competitive. But, just as important are the cutting data calculations that must be optimized for any given application. However, determining this for a new product may require expert opinion. With the travel restrictions of COVID-19, it’s unlikely that a tool specialist can come and visit your premises. So, how can today’s
WATCH VIDEO BELOW
The Sky Hook is your personal safety lifting solution, preventing lifting injuries while saving you both time and money!
800-4-SKYHOOK 800-475-9466 • 208-365-5770
www.skyhookmfr.com INDUSTRIAL MACHINERY DIGEST.COM
skyhook-q-video-WhySky-03-2021.indd 1
IMD | 23 3/19/21 9:46 AM
engineers not only calculate the best values, but also marry these to the best-recommended drill for the job? What’s more, how can this be done quickly and accurately to maintain production uptime against today’s diversification challenges? The answer lies in online software. To choose the right tool and cutting data for new or existing applications, Sandvik Coromant have developed the CoroPlus® Tool Guide. The Tool Guide not only selects the correct tool, it provides cutting data and anticipated tool life for the specific application The ability to make such important decisions, in relation to tooling and its calculations, is vital if manufacturers are to diversify and do so effectively. What’s more, the ability to access this guidance online could be crucial for engineers adapting to the circumstances of COVID-19. Combined with optimised tools like the CoroDrill 860 range, the challenges of what McKinsey & Company calls the “next normal” could also be a time of opportunity for manufacturers and engineers.
Sandvik Coromant’s CD860-GM solid carbide drill is useful for general engineering with mixedmaterials in diversified production setups.
A New Solution For Machining Automation Sandvik Coromant has announced the release of a machine integrated version of the award-winning Silent Tools™ Plus. The launch coincides with the release of CoroPlus® Connected, a solution to establish connectivity between machine tools and cutting tools. In combination, the products will enable conditional automation for internal boring applications, forming the basis of the future of automated machining. CoroPlus® Connected is used alongside the existing Silent Tools™ Plus, a digitally connected damped boring bar from Sandvik Coromant. Having been awarded first place in the International Manufacturing Technology Show (IMTS) Production Innovation contest in 2018, Silent Tools™ Plus helps customers by providing visibility at the cutting zone in internal turning applications with long overhang. Silent Tools™ Plus uses a connected turning adaptor and sensors to monitor load, vibration, deflection, surface finish, temperature and in-cut detection in turning applications. The product was brought to market to overcome the challenge of operator-blindness in internal turning. As an operator has no visuals of the process in question, it was previously extremely difficult to identify potential problems until turning was complete. For industries boring large components, such as aerospace and oil and gas errors can result in significant costs, waste, downtime, and delays. By streaming data directly to a dashboard, Silent Tools™ Plus provides operators with ‘eyes’ at the cutting zone, creating an opportunity to identify problems, such as excessive deflection, vibration or set up problems, before issues escalate and manufacturers are forced to scrap expensive components. The newly launched machine integrated version, with CoroPlus® Connected, allows the invaluable data generated at the cutting zone to result in automated cutting actions — removing the need for operators to monitor the machine dashboard for entire processes. “Using the system, an operator simply needs to set the desired load, vibration and temperature limits, either through the software dashboard, or directly in the NC code,” explained Thomas A Nilsson,
24 | IMD | Q2 2021
Product Manager at Sandvik Coromant. “From here, the conditional automation will protect the process, and reactions are initiated according to the set limits. This increases the process security, avoiding rework and scrap, while allowing the operator to focus on higher value work.” “Launching a machine integrated version is an exciting development of Silent Tools™ Plus,” added Mattias Tjomsland, Software Product Manager. “The tool has long been used to improve decision making in internal turning processes, delivering information and security to otherwise process-blind operators. In combination with CoroPlus® Connected, Silent Tools™ Plus will provide monitoring that, for the first time, can trigger automated mitigating actions when problems and deviations are detected. This will be a game changer for improving component quality and overall efficiency.”
ABOUT SANDVIK COROMANT Part of global industrial engineering group Sandvik, Sandvik Coromant is at the forefront of manufacturing tools, machining solutions and knowledge that drive industry standards and innovations demanded by the metalworking industry now and into the next industrial era. Educational support, extensive R&D investment and strong customer partnerships ensure the development of machining technologies that change, lead and drive the future of manufacturing. Sandvik Coromant owns over 3100 patents worldwide, employs over 7,900 staff, and is represented in 150 countries. For more information visit www.sandvik.coromant.com/us
carburizing (case hardening), SCM415 is normally used. requirements for harder material, SNCM220 and/or SNCM420 y used. hardness is determined by production condition. ected hardness value is informed in a quotation of gears.
Gear precision grade table : ntioned equivalent grades are for reference only. des completely match each other.
Largest selection of
Stock Metric GEARS in North America
15/05/21
14:20:18
259 Elm Place, Mineola, NY 11501 Phone: 516.248.3850 | Fax: 516.248.4385 Email: info@khkgears.us
Industry Insight
Leica Absolute Scanner
Validating Inspections for Compliance vs. Non-Compliance
Exact Metrology Provides Scanning and Training to a Forging Company and a Machine Shop
S
trohwig Industries is a large, familyowned tool and die, injection mold and custom machining shop that helps turn the ideas of engineers into reality. The company was founded in 1978 by Mr. Wolfgang Strohwig and his brother-in-law Larry Glass in Polk, Wisconsin. The initial location had only 600 square feet of space and a single Lucas Boring Bar. Located today in Richfield, Wisconsin, Strohwig Industries has 180 employees with a 225,000 square foot facility. With 56 horizontal and vertical CNC machines and the ability to handle over 100 tons, Strohwig is well equipped to handle large machining.
26 | IMD | Q2 2021
Strohwig building
M
ADE IN TH
E
USA
100%
The Best Tool Cabinet You Will Ever Buy GUARANTEED IN
E V E R Y W AY
MADE BY AMERICAN CRAFTSMEN IN THE USA
WWW.STORLOC.COM • 1-800-STORLOC 1-800-786-7562 sales@storloc.com
Brad Bucholtz, the company Quality Technician, explained Strohwig’s mission as, “The design, manufacture and repair of medium to large forging dies, plastic injection molds and metal die casts, as well as the manufacture of custom contract parts and/ or components.” They machine a variety of steel (H-13, stainless steel, castings, forgings) and aluminum components. The company serves various markets including aerospace, automotive, mining, defense, building assembly, oil and gas, energy, marine, etc. This is why they decided to use Exact Metrology equipment for their inspection needs. Brad said they’ve worked with Exact Metrology for over ten years. Initially, the company provided metrology services. He added that before 2010, there was no need for metrology as company employees manually inspected jobs that needed it. Working with Exact Metrology, Strohwig bought a Hexagon Romer Arm in
In a short video, Brad Bucholoz, Strohwig Quality Technician, describes Strohwig as company in business for 43 years that specializes in plastics and die cast molds and large contract machining parts. Tasked to test for compliance vs. non-compliance of a forged part by a Midwestern metal forging customer, Bucholoz highlighted that Strohwig uses the same hardware and software as their customer to communicate more accurately with them. This included the use of PolyWorks|Inspector™ Leica Absolute Tracker AT960MR and the Hexagon Romer Arm. The Absolute Tracker was used in conjunction with the Leica Absolute Scanner LAS-XL and T-probe. Bucholoz mentioned that Exact President, Dean Solberg and the Exact team have always been to help and that he sees this relationship continuing into the foreseeable future.
CLICK TO PLAY VIDEO 28 | IMD | Q2 2021
2016 and Leica Tracker in 2019. When the Romer RS6 scanner was released, Exact Metrology offered a trade in on the older Romer arm. The productivity increase was so great it was easy to justify the investment of the new arm/scanner. This equipment came in handy when Strohwig received a request from a major Midwestern forge that has a long-standing relationship with them. This metal forging company in Illinois has a 126-year history and specializes in open die forging and rolled ring forging. The company was using Coordinate Measuring Machines (CMM) but needed to upgrade their equipment. A new job required Leica Absolute Tracker precise measurability of a large forged part with complex geometry. Dean Solberg, Exact Metrology co-president suggested that they invest in scanning technology. Thus, the company purchased a Leica tracker, as well as PolyWorks software. Leica Absolute Tracker AT960 features an all-in-one integrated design, single-box probing system and smart connectivity. Additional features include continuous measurement, entry-level probing with T-probe and 2 Handheld laser scanners. One is an 8-inch line scan and another is a 24-inch line scan to capture huge amounts of data quickly. The System is IP54 Certified for protection against dust and other contaminants. PolyWorks|Inspector™ was used to verify the quality of the part through the use of high-density point clouds and contact-probe datasets. The scan was performed in a working environment, not a traditional lab, which meant that personnel were doing this while forging occurred. In the past, Strohwig machined various parts for them. Now, this forge had Strohwig test for compliance vs. non-compliance in one of their forged parts. To do this, Strohwig used the Hexagon Romer Arm and the Leica Absolute Tracker. The portable measuring arms allowed company personnel the flexibility to measure on the machine shop or the floor. It featured no honing procedures, simplicity of operation and reliable 3D measurements. The Absolute Arm 7-axis delivers tactile probing and laser scanning in a uniquely ergonomic package. Once this was completed, they used PolyWorks|Inspector™ to verify the quality of the part by using a color map. In the future, the company is looking to purchase additional Exact Metrology products.
Strohwig was able to coordinate with the company as they use common platforms to communicate and shared daily emails and PowerPoint presentations with their results. Brad Bucholtz used data mergers to combine the Romer and Leica data sets into one report. Since using Exact Metrology, Brad said, “We are able to provide detailed reports to our customers. Also, we’re able to perform in-process inspections to validate specific processes.” He further commented that Exact Metrology allowed them to supply a superior product and their deliverable to the customer has greatly improved. When referring to the benefits of working with Exact Metrology, Brad noted, “Training only goes so far. After initial training, there are many stumbles and Exact is always there to make sure we get the knowledge we need. Onsite or offsite, they go above and beyond the call to make sure we can provide our customers with the data they need.”
Large machining parts (inside Strohwig)
ABOUT EXACT METROLOGY
EXACT METROLOGY, INC.
Exact Metrology is ISO, AS9100 Certified as well as FFL and ITAR Registered.
Dean Solberg
Exact Metrology, with facilities in Cincinnati, Ohio, Moline, Illinois and
20515 Industry Avenue
Milwaukee, Wisconsin, plus affiliated offices throughout the country, is a
Brookfield, WI 53045
comprehensive metrology services provider, offering customers 3D and CT
Local: 262-533-0800
scanning, reverse engineering, quality inspection, product development
www.exactmetrology.com
and 2D drawings. The company also provides turnkey metrology solutions,
deans@exactmetrology.com
including equipment sales and lease/rental arrangements.
UNEXPECTED. IN A GOOD WAY. Prototyping. Second operations. Short-run production. Because it’s compact the 1100MX fits into spaces you’d think it wouldn’t, and with servo motors and a BT30 spindle, it does more than you’d think a compact machine would. It runs on our intuitive and easy-to-use CNC controller, PathPilot®. It’s a dealmaker for a lot of our users. And decked out with an automatic tool changer, it starts cutting at about $25K.
What do Tormach owners love about Tormach? • Owner assembly and commission keeps buying reasonable. • Owner maintenance and repair reduces cost of ownership. • Modular, buy-what-you-need-and-as-you-go machines. Get one now and install upgrades when you’re ready. • Veteran machinists make up our USA-based tech support. We’re dedicated to help people make things.
Learn more and build yours at tormach.com/1100MX/IMD INDUSTRIAL MACHINERY DIGEST.COM
IMD | 29
Product Showcase
PRODUCTSHOWCASE WANT TO BE FEATURED? Send your latest product information to editorial@indmacdig.com
IMD's Product Showcase features the latest from some of the manufacturing industry's top suppliers.
Vention and OnRobot Partner to Bring a One-Stop-Shop for Cobot Applications to Manufacturers Globally Vention, a manufacturing automation platform (MAP), announced its partnership with OnRobot, which makes tools for collaborative applications. This partnership combines Vention’s online-first manufacturing automation platform with OnRobot’s library of plug-and-play end-of-arm tools to accelerate the design and deployment of end-to-end cobot applications. Vention’s MAP provides users with the engineering software and modular hardware they need to design, automate, order, and deploy factory equipment in a single digital environment. With thousands of modular parts, smart design tools, and real-time pricing, factory equipment can be designed in minutes—from anywhere, on any web browser. With the addition of OnRobot’s plug-and-play tools for collaborative and light industrial robotics, manufacturing professionals can focus on scaling production with greater flexibility and efficiency. » For more information about Vention, visit vention.io » For more information about OnRobot, visit onrobot.com
30 | IMD | Q2 2021
The combination of offerings makes it even easier to automate tasks like machine tending, material handling, material removal and assembly. With solutions for grippers— parallel, flexible, magnetic, and vacuum alike—as well as vision cameras, sanding tools, screwdriving tools, and more, the application possibilities have now been significantly expanded. “We’re thrilled to be working with OnRobot to offer a range of industry-leading cobot solutions,” says Patrick Tawagi, Director of Application Development at Vention. “OnRobot’s suite of grippers and end-of-arm tools covers almost every application in the cobot market, and their straightforward interface combined with Vention’s platform makes them incredibly easy to deploy.”
IMD – The Industry’s Most Extensive Industrial Publication
Custom Cabinet Coolers for Electrical Enclosures EXAIR’s Cabinet Cooler systems can be customized to provide cooling within electrical enclosures in NEMA 12, NEMA 4, NEMA 4X and Hazardous location environments. These customizations include specific Btu/Hr values from 275-5600 Btu/Hr., adaptations for high temperature environments up to 200°F (93°C), and a selection of materials including aluminum, Type 303SS and 316SS to combat corrosive environments. For dirty and dusty environments, a Non-Hazardous Purge option will create a positive pressure inside the cabinet to keep dirt and debris from entering your control panel. All systems are UL Listed and CE compliant. Additional customizations include settings to maintain a specific cabinet temperature, special coatings, high temperature materials, special cold air distribution kits and more. Cabinet Cooler systems are the low-cost way to purge and cool electrical control panels. They convert an ordinary supply of compressed air to cold, 20°F air without refrigerants. The cold air is circulated through the enclosure to eliminate heat damage and control shutdown. The compact Cabinet Coolers can be installed in minutes through a standard electrical knockout hole. Optional thermostat control minimizes compressed air use. There are no moving parts to wear out and no maintenance is required. Applications include cooling PLCs, microprocessors, variable frequency drives, industrial computers, and robotics. Cabinet Cooler Systems start at $492. » For more information, visit exair.co/ccspec
Suhner Industrial Products Releases New Brochure Detailing their ECONOmaster® Drilling Unit Suhner Industrial Products recently released a revised 6-page color brochure detailing their ECONOmaster® drilling unit. The ECONOmaster® line is made in the USA and is suitable for multiple materials, such as metal, wood, and plastics. The revised brochure offers detailed information, including technical data, product features, specifications and mechanical drawings. It features speed & feed charts as well as a full range of collet sizes available. Optional mounting stand and details for 2 spindle multi-head & adapters are also shown. The final page includes a part numbering matrix that is easy to understand and helps the customer order the perfect unit. The ECONOmaster® drilling unit is affordably priced at just over $3,000 for the basic unit. It is in stock for immediate delivery or customizable to suit the customers application. » For more information, visit www.suhner-machining.com
ABB’s IRB 1300 Robot Enhanced with New Protection For Harsh And Clean-Room Applications ABB’s 6-axis IRB 1300 industrial robot includes new protection elements that enable it to be used in tough industrial applications and contamination-free production processes, opening new opportunities for increased productivity, improved product quality and reduced cycle times in a variety of industries including electronics assembly, automotive and metals fabrication, amongst others. Originally launched in 2020, the IRB 1300 is now available in IP67, Foundry Plus 2 and cleanroom ISO 4 versions. This will expand its use in tough environments, with high levels of INDUSTRIAL MACHINERY DIGEST.COM
IMD | 31
liquids and dust. This is achieved by preventing intrusion by sealing all electrical components, which enables in a variety of processes in industries including electronics manufacture, Automotive, and metals fabrication. For added protection in metals applications including metal die casting, sand casting, forging and machining, the Foundry Plus 2 version includes the use of stainless steel on the end effector. This will prevent rusting that can occur when liquids are applied to wash away dust particles and metallic de-bris. By helping to
protect against premature wear, this feature can help to prolong the robot’s service life, minimizing disruption caused by downtime and unscheduled repairs. “The addition of cleanroom and harsh environment capability enables us to offer the benefits of the IRB 1300 to a whole new set of manufacturing applications in industries renowned for their tough nature or their need to be contamination-free,” said Darren Hung, Global Product Manager – Small Robots for ABB.
» For more information, visit www.abb.com
ACSYS Lasertechnik Introduces Multishift Laser Processing System ACSYS Lasertechnik announces Multishift, the fully automatic laser system with Industry 4.0 integration. Multishift is a complete laser system that offers some of the most advanced laser marking, structuring, cutting, and engraving on the market. Its robotic precision ensures reliable and consistent results. Another advantage is ACSYS's specialized sensitive robotic gripping, which leaves no indelible marks. Multishift features automatic pallet processing to enable faster and more accurate laser processing as well as eliminating some batch tasks. Featuring OCR (Optical Character Recognition) and OPR (Optical Parts Recognition), Multishift provides operators more complete, accurate, and hands-free laser processing capabilities -- saving time and minimizing product reworks. The system's Online Depth Control (ODC) provides optimal engraving and Dynamic Focus Control (DFC) tracks the laser's focal point, delivering perfect laser accuracy. Designed to be user-friendly, Multishift features an industrial-grade frame made of high-strength steel with a temperature-stable granite structure. Its minimized footprint and configurable design enables Multishift to fit into smaller spaces and can be configured to a company's specifications. This laser system’s ergonomic design is height-adjustable to fit its user and provides a touch-sensitive surface. Most importantly, the high-resolution camera is highly sophisticated and functional such that it does not require any reconfiguring for each laser session. » For more information, visit www.acsyslaser.com
32 | IMD | Q2 2021
ACTEK HOIST RINGS SAFE & EASY LIFTING SOLUTIONS • 200% PROOF LOAD TESTED • INDIVIDUALLY SERIAL NUMBERED FOR BETTER TRACEABILITY • ORDERS SHIPPED SAME DAY • RATED LOAD 400 LBS - 250,000 LBS
ANYbotics’ new autonomous inspection solution is on the move Up-to-date and reliable data on the equipment's health is essential for effective and efficient industrial operations. In a condition monitoring process, inspection data is collected and analyzed, and provides the insights to trigger corrective actions to optimize operational uptime, performance, and quality. Even with IoT devices, full inspection coverage cannot be reached, as fixed-installed sensors will at some point stop scaling — both with regards to installation efforts and device cost. For this reason, plant operators manually perform routine inspection rounds multiple times a day, often in unpleasant or potentially hazardous settings. Fortunately, robotics technology has matured in recent years to provide an automated and fully digital inspection solution. The Swiss robotics company ANYbotics has been working with industrial customers for the last five years to enable the integration of robotics in their inspection routines. ANYbotics has launched its first certified commercial product as part of its integrated end-to-end robotic inspection solution. The new ANYmal D legged robot provides users an autonomous system with advanced condition monitoring capabilities. Out of the box, the robot provides large-scale autonomy, including obstacle avoidance and self-charging via a docking station for routine inspection tasks without human intervention. The pan-tilt inspection unit features high-end sensors for accurate and reliable visual, thermal, and acoustic measurements, as well as inspection intelligence software covering some of the most relevant industrial inspection tasks. Built for harsh environments, the robot is IP67 water- and dust-proof ingress protected for use in indoor and outdoor environments in all weather conditions.
0° 18 ts vo
Pi
Forged Street Plate™ Swivel Hoist Rings
Side Load Hoist Rings
Hoist Ring Kits
Swivels 360°
Drop Forged Hoist Rings
ISO 9001
Mold Handler™ Swivel & Pivot Hoist Rings
Forged Swivel Hoist Rings
Round Base Swivel & Pivot Hoist Rings
ACTEKMFG.COM 800-752-7229 | SALES@ACTEKMFG.COM
» For more information, visit www.anybotics.com INDUSTRIAL MACHINERY DIGEST.COM
IMD | 33
New Compact HEIDENHAIN Rotary Encoder Made for Robots With its small dimensions and high reliability, HEIDENHAIN’s new KCI/KBI 1300 series of inductive rotary encoders are made specifically to support compact servomotors for collaborative and service robots. First presented at the international virtual trade show SPS in November of 2020, these new KCI 1319 / KBI 1335 measurement feedback devices are now available and are proving to be of great interest to those in this ever-growing market. Each lightweight KCI 1319 / KBI 1335 encoder includes a 25 mm hollow shaft and inductive scanning technology that makes it insensitive to contamination and magnetic fields. » For more information, visit www.heidenhain.us
Stoecklin Logistics Debuts CO-PRO Robotic Case Picker at ProMat DX Conventional manual picking of crates and cartons is inefficient, wastes valuable time and labor resources, is not ergonomic, requires heavy lifting and repetitive tasks and leads to inaccuracies and higher costs. Stoecklin Logistics, a supplier of innovative supply chain solutions, is addressing these challenges with a new robotic case picker, called CO-PRO, for temperature controlled environments. The Stoecklin CO-PRO automatically moves cases, crates and cartons directly from pallets to a conveyor or robotic system, eliminating labor for picking operations. Its patented universal gripper holds up to 66 pounds and the loadhandler is flexible enough to transfer multiple units for higher throughput. » For more information, visit stoecklin.us
Doosan Robotics Unveils Industry's First ROS Package that Supports ROS 2 Foxy Fitzroy Doosan Robotics strategically designed its ROS 2 Foxy package to provide both convenience and accessibility. As the package is compatible with Doosan Robot Language (DRL), operators of Doosan robots with only standard ROS knowledge can easily create intelligent robotics application. The package is expected to accelerate the development of robot applications in various fields, including gripper, mobile robot integration, and multirobot control in addition to existing controls. The company plans to support ROS 2 on various platforms such as Windows and Amazon AWS RoboMakers from the second half of 2021 and anticipates more robot applications incorporating cloud and AI to be deployed. To familiarize users to ROS 2 and expose its new features to operators, the company will be supplying tutorial packages on » For more information, visit www.doosanrobotics.com
34 | IMD | Q2 2021
creating robot functions via its partner supporting site, Doosan Robot LAB. Video tutorials on ROS application will also be made available on the site. Doosan Robotics has been supporting ROS Kinetic and ROS Melodic since 2019, and additionally distributed the ROS Noetic package in March this year. To date, Doosan Robotics officially supports four versions of ROS.
ESAB Rogue ES 130i Pro Compact Stick/Lift TIG Inverter The Rogue ES 130i PRO is a new portable and affordable Stick/ Live TIG inverter with professional arc performance and controls such as adjustable hot start, adjustable arc force and power factor correction. The Rogue ES 130i PRO joins the Rogue ES 180i PRO, introduced last year, as the latest addition to the Rogue ES family of compact Stick/TIG inverters. The new Rogue 130i PRO weighs just 18.2-pounds., measures 13.5 x 6 x 10.4 inches and uses 120 – 230V ± 15% 50/60 Hz primary power. On 230V input it delivers a maximum output of 130 amps at 25 percent duty cycle for welding with electrodes up to 1/8-inch; on 120V input it offers a maximum output of 90 Amps at 25 percent duty cycle for welding with 1/16- and 3/32-inch electrodes. Rogue’s next-level control technology produces a smooth welding arc with all types of Stick electrodes, including E70818, and it has a special mode for E6010. The Live TIG (DC TIG) function provides positive arc starts without the use of high frequency. It
delivers a stable TIG arc down to 10 amps, giving welders the control they need to work on thin metal or delicate components.
» For more information, visit www.esab.com
FANUC’S Popular LR Mate Robot Series Now Features 10 Model Variations FANUC America, the leading supplier of CNCs, robotics, and ROBOMACHINEs has introduced the LR Mate 200iD/14L, the tenth model variation of the popular LR Mate series of tabletop industrial robots. Since the LR Mate series was launched nearly 30 years ago, it has become one of FANUC’s biggest sellers, with over 70,000 units installed across the globe. The popularity of the LR Mate robot series is due to FANUC’s world-renowned reliability along with a number of unique features including its lightweight, tabletop size, which is often compared to the size of a person’s arm. In addition, the LR Mate can process or handle
Innovation, Quality & Performance Backed By Decades Of Experience
Faster Deliveries and Superior Service Angle Rolls 1” to 10” Capacities, 3 Axis Universal
Rolls, Touch Controls, Coiling Solutions & Custom Tooling Options
3000 SERIES
Section Bending Machines
1" to 3" Capacities, CNC & Ornamental Options All work both Horizontal & Vertical
VBH SERIES
Plate Rolls 20 Ga to 6” Capacities, CNC 3-D CAD Controls, Vertical Tank Systems, Translating Geometry & More!
www.carellcorp.com • www.eaglebendingmachines.com sales@carellcorp.com • sales@eaglebendingmachines.com
NEW! EAGLE BA-55
Visit us at Booth A5314 September 13-16, 2021 in Chicago
Visit Us Online or Call: (251) 937-0947 MEMBER
INDUSTRIAL MACHINERY DIGEST.COM
IMD | 35
parts weighing up to 14kg in the automotive, e-commerce and warehousing, food and beverage, medical device, pharmaceutical, and many other industries. Ten models include clean room and wash proof versions, each with various wrist speeds and reaches to accommodate even the most limited workspace. The LR Mate 200iD robots offer a “best in class” work envelope for both upright and invert mount installations. The LR Mate 200iD robot series also offers an ISO Class 4 clean room/food-grade variant for food handling and healthcare packaging applications. These small tabletop robots can be equipped with a variety of intelligent features including robot vision and force sensing functionality for even higher levels of accuracy and productivity. » For more information, visit www.fanucamerica.com
Save Space, Gain Mounting Flexibility with KUKA’s New KR C5 micro Robot Controller The robot controller features an industry first compact design, yet it provides the same, if not more, capabilities and storage capacities as full-sized controllers but in a much lighter and approximately 200% smaller size platform. The new controller is for the company’s KR AGILUS and KR 6 SCARA families of robots, and its compact size saves floor space and provides significantly increased mounting flexibility along with seamless integration of software and robot compatibility. With an overall volume of only 16 liters and weighing just 9 kg, the KR C5 micro, allows users to mount the controller horizontally or vertically in a wall mounted/ bookshelf orientation or stack multiple units on top of each other, or with an existing
NO BETTER TIME. NO BETTER PLACE.
TO RECONNECT. The 17th biennial Wisconsin Manufacturing & Technology Show presents the opportunity to get back to face-to-face and hand-to-handshake interaction for exhibitors and attendees alike.
WIMTS has evolved into a destination for future ideas, technologies and solutions.
DISRUPTIVE TECHNOLOGY. ADVANCED MANUFACTURING. •
Machines will be up and running, creating live showcases.
•
There will be Labor Enhancement Initiatives, including Student Competitions in Welding and Robotics, generating an on-site talent pool.
•
Three educational seminar rooms will be sharing insights and providing a wealth of solution-based resources.
TO GET BACK TO BUSINESS YOU HAVE TO LOOK FORWARD OCTOBER 5-7, 2021 - MILWAUKEE, WI
WWW.WIMTS.COM 36 | IMD | Q2 2021
Questions? Contact Cheryl Luck at 262-367-5500 or Cheryl@EpiShows.com
standard 19” rack mount cabinet. Optional mounting brackets for controller fastening allow the new controller to adapt to existing industry standard rack mount rails for having multiple robot controllers within a single cabinet. Plus, with a lighter, more compact design, the KR C5 micro is easy to deliver/ship, set up and relocate if needed.
KUKA’s options allow for the use of either a KUKA battery or users can supply their own uninterruptable power source. KUKA also gives users the option to use one battery for up to three robots via a simple cable connection.
» For more information, visit www.kuka.com
The Ez Series machines are designed to give job shops and other manufacturers affordable access to Mazak technology and engineering expertise. For maximum efficiency, reliability, and value in precision part production, the QT-Ez 12MSY is a turning center with milling and Y-axis off-centerline capabilities paired with a second turning spindle for complete DONE IN ONE® part processing. Productivity and unmanned operations are further enhanced when shops seamlessly integrate the machine with a range of automation solutions, from a bar feeder and parts catcher to full cooperative robot systems. Mazak’s HQR-200MSY Multi-Tasking Machine equipped with highly productive twin spindles and twin turrets for unequaled part processing and high throughput. The machine makes easy work of complex workpieces, processing them complete from raw material to finished part in single-setup DONE IN ONE® operations.
INDUSTRIAL MACHINERY DIGEST.COM
IMD | 37
IF YOU HAVE AN EDGE… WE HAVE A TRIM! FREE SAMPLES
FREE CATALOG
Test Our Trims and Seals for Quickly View Our Most Popular Fit and Function Lines of Trims and Seals
DESIGN ASSISTANCE Let Us Help You Find the Right Trims and Seals
Sporting equal Y-axis off-center capability in both its upper and lower turrets, the HQR-200MSY significantly shortens part cycle times through balanced cutting and simultaneous 1st and 2nd-op processing. The machine also integrates easily with a bar feeder or robot loader/unloader for lights-out production. » For more information, visit www.mazakusa.com
High-Speed PL190 and PL320 Palletizing Robots Add Versatility to the PL-Series Line Offering exceptionally fast and powerful operation for increased production throughput, the highly reliable four-axis PL190 and PL320 models now join the PL500 robot, enabling a wide range of palletizing applications, order picking and other logistical tasks. Ideal for end-of-line or distribution automation, PL-series robots are well-suited for a variety of industries, moving boxes and filling pallets with ease and precision. A one-piece upper arm reduces mass and increases durability, while parallel-link construction for strength and heavy-duty bearings for smooth arm rotation support the handling of large, heavy payloads. A 75 mm T-axis pass-through facilitates easy connections to the end-of-arm tool, and its high moment of inertia ensures unbalanced loads are handled effectively. The PL190 and PL320 robots can be floor-mounted, and brakes are included on all axes. Installation is quick and efficient. A single cable is all that is needed to connect the manipulator to the controller, resulting in easy setup and reduced expenses for maintenance and spare parts inventory. Airlines and cables are routed internally from the base to the end-of-arm tool to maximize reliability, and a cable installation tube facilitates fieldbus routing to the upper arm and/or gripper. » For more information, visit www.motoman.com
Same Day Shipping on Thousands of Parts
CALL US TODAY!
800-663-9507
HEADQUARTERS MIDWEST MANUFACTURING 6855 HERMOSA CIRCLE 1642 GATEWAY COURT BUENA PARK, CALIFORNIA 90622 ELKHART, INDIANA 46514
WWW.TRIMLOK.COM INFO@TRIMLOK.COM 38 | IMD | Q2 2021
CUTTING-EDGE PROBLEMS NEED CUTTING-EDGE SOLUTIONS
Join us as we return to live events with the ONLY Machining & Manufacturing Show in the Pacific Northwest! SEPTEMBER 1-2, 2021 |
OREGON CONVENTION CENTER, PORTLAND, OR
The Machine Tool Expo features: • Exhibit Hall of Innovative, New, and Exciting Products • Live Equipment Demos
For Exhibiting Information: Joyce Lortz 410-598-3535 JLortz@FacilitiesExpo.com
• Meet Face-to-Face with Leading Solution Providers • Networking with Your Peers • In-Depth Educational Seminars by Experts • Will Follow State, Local and CDC Guidelines
Register Online for FREE Today! MTENW.MachineTool Expos.com
Quarter 1, 2020 IndustrialMachineryDigest.com
IndustrialMachineryDigest.com June 2021
K C A B G N I T T GE ! ! K R O W O T ESTABLISHED IN 1986 AND IS THE INDUSTRY’S
Most Extensive Industrial Publication.
2021 INDUSTRIAL MACHINERY DIGEST’S
SERVING AMERICAN MANUFACTURERS FOR OVER
35 YEARS
ANNUAL SUPPLIERS DIRECTORY
Also this Quarter » 2021 Featured Suppliers
» 2021 Annual Suppliers Guide Listings
Featured Suppliers
2021 ANNUAL
SUPPLIER'S DIRECTORY FEATURED SUPPLIERS
Accudyne Products – EZ Puller
Actek Manufacturing & Engineering
Accudyne Products sells the EZ-Puller which does not need adjustment. Your time is too valuable to waste adjusting a bar puller. Join the thousands of machinists worldwide who are enjoying the benefits of a reliable puller that does not need adjustment. Change bar size in seconds and end the frustration. EZ-Puller, BAR PULLING MADE EASY!
Since 1989, Actek® Manufacturing & Engineering has established a reputation for providing top-quality products as well as excellent service. Actek hoist rings are ISO 9001:2015 certified, 200 percent proof-load tested, and come with a certificate.
(303) 991-1500 dan@ezpullerusa.com | www.ezpullerusa.com
(800) 752-7229 sales@ActekMfg.com | www.actekmfg.com
AeroGo, Inc.
AGMA – American Gear Manufacturers Association
AeroGo manufactures innovative load moving equipment, utilizing wheels and hovercraft technology, that move heavy, awkward, or delicate loads in factories. AeroGo works with companies large and small to find a load moving solution that is safe, efficient and cost-effective.
AGMA is the global network for technical standards, education, and business information for manufacturers, suppliers, and users of mechanical power transmission components. The association includes about 495 of the world's top gearing companies across more than 30 nations.
(800) 426-4757 info@aerogo.com | www.aerogo.com
(703) 684-0211 membership@agma.org | www.agma.org
Allied Machine & Engineering
American Technical Publishers
Allied Machine & Engineering is a leading manufacturer of holemaking and finishing cutting tool systems. Located in Dover, Ohio, Allied devotes its advanced engineering and manufacturing capabilities to creating the widest selection of value-added tooling available to metal-cutting industries around the world.
American Technical Publishers (ATP) produces effective training materials for technicians and skilled-trades workers in construction, electrical, mechanical, and maintenance industries. Our high-quality instructional materials are widely used in apprenticeship and industrial training programs.
(800) 321-5537 info@alliedmachine.com | www.alliedmachine.com
(800) 323-3471 service@atplearning.com | www.atplearning.com
42 | IMD | Q2 2021
IMD – The Industry’s Most Extensive Industrial Publication
AMS | Press Brake Safety
Baker Engineering LLC
Advanced Manufacturing Solutions | Press Brake Safety is a leading industry advocate for press brake operator safety. PBS is the exclusive North American installer of Germany-based Fiessler AKAS® laser safety systems, the most sophisticated press brake safety systems in the world.
Precision machining company, Baker Engineering LLC.’s core business centers around the design and development of high tech, high-performance technologies for a variety of applications, from custom engines, to engine components, to the production of parts and mechanical assemblies for other industries.
(800) 901-1193 sales@pressbrakesafety.com | www.pressbrakesafety.com
(616) 837-8975 jones@bakerengineeringmfg.com | bakerengineeringmfg.com
BEHRINGER SAWS, INC.
Betenbender Manufacturing, Inc.
BEHRINGER SAWS manufactures high-performance superior sawing technology bandsawing machines, circular cold saws, and structural fabricating equipment. Our primary goal is to create additional value for our customers by striving to achieve the highest combination of speed, accuracy, and cost-effectiveness.
The Betenbender Family of American Hydraulic Shears and Hydraulic Press Brakes are made by Betenbender Manufacturing,Inc. in Coggon, Iowa, U.S.A. Now in their fifth decade in business, this Midwestern Company continues to produce, what they believe, is America's best built shears and press brakes.
(610) 286-9777 info@usa.behringer.net | www.behringersaws.com
(319) 435-2378 sales@betenbender.com | www.betenbender.com
Burr King Mfg., Co., Inc.
Carell Corporation
Since 1951 Burr King grinders, polishers, and mass finishing systems have utilized innovative designs of uncompromising quality. They are industrial grade and intended for use on metals, woods, composites, plastics, rubber, stone, fiberglass and other materials.
Founded over 27 years ago to provide higher quality fabricating machines, faster deliveries, and superior service. Carell Corporation & Eagle Bending Machines, Inc. proudly maintain their goals and have placed over 8,000 machines in North America. Proof that their commitment, quality, and service are valued by today’s industry.
(660) 438-8998 info@burrking.com | www.burrking.com
(251) 937-0947 sales@carellcorp.com | www.carellcorp.com
Clamprite, LLC
Combilift
The Clamprite Gage was designed for accurate spindle tension testing right on the machine. The actual force exerted by the spindle drawbar mechanism is read directly on the dial, so there is no need for any calculations or conversions. Drawbar force checking is made easy using the Clamprite drawbar force gage.
Combilift is a specialist four-directional forklift and straddle carrier manufacturer producing a wide range of customized handling solutions, all of which are designed for the safe, space-saving, and very productive handling of long and awkward loads. Capacities from 3,200-pounds to 18,000-pounds.
(775) 246-5100 jerome@clamprite.com | www.clamprite.com
(877) 266-2456 info@combilift.com | www.combilift.com/us
Cosen Saws, North America
COXREELS
Cosen Saws is a global leader in COSEN SAWS Since 1976 manufacturing industrial band saws and technologies. Offering cutting solutions for a wide variety of industries and applications, we offer over 70 different models with nearly 200 units in stock and ready to ship from our Charlotte, NC HQ.
COXREELS® has remained focused on manufacturing high-quality professional-grade hose, cord, and cable reels since 1923. Offering a full product line serving the industry in every channel and application, COXREELS® designs, builds, and supports their products in America.
(704) 943-1030 info@cosensaws.com | www.cosensaws.com
(480) 820-6396 info@coxreels.com | www.COXREELS.com
Custom Machine & Tool Co., Inc.
DCM Tech, Corp.
Custom Machine & Tooling is an American-made manufacturer of power transmission and motor control components. Since 1964, CMT has supplied the world with high-quality products at competitive prices from its Northeast manufacturing location. The multigenerational company continues to expand its global reach.
DCM Tech is a family-owned manufacturer of rotary surface grinders and automotive rebuilding equipment. Our machines are backed by factory-direct service and support from our production facility in Winona, MN. Check out their full lines of equipment and request a quote.
(781) 924-5154 cstevens@cmtco.com | www.cmtco.com
(800) 533-5339 info@dcm-tech.com | www.dcm-tech.com INDUSTRIAL MACHINERY DIGEST.COM
IMD | 43
Featured Suppliers Dynabrade, Inc.
Eagle Bending Machines
Dynabrade has earned a reputation in the innovative design and manufacturing of unique portable pneumatic abrasive power tools, related accessories, and dust collection. Dynabrade tools have been proudly designed, manufactured, and built in the USA for 50 years.
Eagle Bending Machines’ precision engineered quality is designed to meet the demands for tough, dependable Section Benders for bending pipe, tube, profiles, sections, and ornamental pieces and working day after day with minimum downtime.
(800) 828-7333 customer.service@dynabrade.com | www.dynabrade.com
(251) 937-0947 sales@eaglebendingmachines.com | www.eaglebendingmachines.com
Essex Structural Steel Co., Inc.
Federal Knife, Inc.
Essex Structural Steel has been manufacturing pre-engineered building since 1972. Their buildings are designed for easy erection, energy efficient, designed to exceed local and state codes and are built in the USA by American Workers.
Federal Knife Inc. is a global supplier of high-quality machine knives and blades of all types. Federal Knife also provides the correct replacement blade for your equipment. In addition to our large inventory and custom manufacture blades to your specifications. Federal Knife has over 25 years of experience in cutting edge technology.
(800) 323-7739 sales@essexstructuralsteel.com | www.essexstructuralsteel.com
(812) 364-1448 sales@federalknife.com | www.federalknife.com
Formdrill USA, Inc.
Fortville Feeders, Inc.
Formdrill helps you produce your own inserts out of the same parts material. Users save money by eliminating the need to buy nuts or threaded inserts. You do not need to weld or install fasteners.
Fortville Feeders is a manufacturer of Feeding Systems that are engineered to easily integrate into your automation system. Maintenance and changeover friendly. Turnkey capable. Of the highest quality and ability.
(773) 290-1040 info@formdrill-usa.com | www.formdrill-usa.com
(317) 485-5195 info@fortvillefeeders.com | www.fortvillefeeders.com
H&K Equipment, Inc.
HE&M Saw
H&K Equipment, Inc. was founded in 1983 to provide specialized material handling solutions and exceptional service to their customers. H&K Equipment is a comprehensive leader in lift trucks, container handlers, personnel carriers, yard trucks, and industrial sweeping and scrubbing equipment.
HE&M Saw manufactures more than 70 different models of production band saws for the metalworking industry. Their product line, includes vertical, horizontal, plate and double column saws with capacities ranging from 12 feet x 12 feet to 80 feet x 80 feet machines.
(800) 272-9953 info@hkequipment.com | www.hkequipment.com
(888) 729-7787 sales@hemsaw.com | www.hemsaw.com
HMI a Division of Betenbender
HYDMECH Canada Corp.
HMI offers the most versatile C-Frame press or punch of all machines available today. Their frames are designed to have fewer tons-per-square-inch of pressure on their side plates, thus reducing spring back of the frame and reducing tool wear.
HYDMECH is a world leader in metal band saw and cold sawing solutions. Their innovative solutions are geared to meet the practical needs of the aerospace, automotive, steel service centers, metal fabrications shops, racing, and other sectors.
(319) 435-2378 sales@betenbender.com | www.betenbender.com
(877) 276-7297 info@hydmech.com | HYDMECH.com
Hypneumat, Inc.
Jergens, Inc.
Hypneumat, Inc. manufactures an array of automatic drilling units, tapping units and multiple spindle heads under the Hypneumat, Commander and Snow brands. Hypneumat also specializes in contract machining services offering multi-axis turning and vertical machining capabilities.
Since their founding in 1942 Jergens, Inc. has grown to comprise three distinct business units: Workholding Solutions, Lifting Solutions and Specialty Fasteners. Their tooling components, fasteners, and hoist rings are at work in just about every industry on every continent.
(414) 423-7400 info@hypneumat.com | www.hypneumat.com
(877) 486-1454 info@jergensinc.com | www.jergensinc.com
44 | IMD | Q2 2021
IMD – The Industry’s Most Extensive Industrial Publication
Kanetec USA Corporation
KHK-USA
Kanetec has been at the forefront of magnetic tools and equipment since 1959. The company has expanded their magnetic bases, tools, and chuck lines with the latest technology and electronic controls.
Having been a company solely devoted to the manufacture of gears for 80 years, KHK is world renowned for their brand of gears. KHK USA is a factory direct, full-service distributor of KHK gears to meet your gearing needs.
(800) 959-0449 sales@kanetec.com | www.kanetec.com
(516) 248-3850 info@khkgears.com | www.khkgears.us
L&L Special Furnace Co., Inc.
Lenzkes Clamping Tools, Inc
L&L Special Furnace Co., Inc. has a longstanding reputation for designing special industrial furnaces, ovens, kilns, quench tanks and heat treating systems. Their broad product line allows L&L to provide special treatment in creating the best system for thermal needs.
Lenzkes clamps assist with QMC-Quick Mold Change, QDC-Quick Die Change, SMED-SingleMinute Exchange of Die and other machining/safety issues. Their free trial program allows use in real-time working situations (such as Stamping, Milling, and Injection Molding) without obligation to purchase.
(610) 459-9216 sales@llfurnace.com | www.llfurnace.com
(540) 381-1533 info@lenzkesusa.com | www.lenzkesusa.com
LS Industries, Inc.
Motion + Power Technology Expo (formerly Gear Expo)
From design and manufacturing, to parts and service LS Industries is committed to providing the highest levels of performance in addressing your metal cleaning needs. LS Industries designs and manufactures a full line of metal cleaning equipment for the industrial and automotive markets.
At Motion + Power Technology Expo 2021 in St. Louis, you'll see the full range of power transmission solutions, including hybrid solutions, utilizing mechanical power transmission, pneumatics, hydraulics, electric motors, and drives. Anyone looking to facilitate new ideas and connections is invited to attend this in-person event.
(316) 265-7997 info@lsindustries.com | www.lsindustries.com
(703) 684-0211 mptexpo@agma.org | motionpowerexpo.com
Northwest Machine Tool Expo | Endeavor Business Media
OnRobot
Northwest Machine Tool Expo is a unique regional event for the machining and manufacturing industries. This event features free educational sessions and an exhibit floor showcasing the latest products and services in the industry. See what is new in the world of machining and manufacturing, and network with peers and key industry players.
OnRobot's cutting-edge robotic tools for lightweight industrial automation empowers end-users to work alongside cobots on applications such as machine tending, quality control, materials handling, packaging, assembly, or surface finishing. Their One System Solution yields unified programming, easy deployment, and zero complexity.
(913) 565-2199 info@machinetoolexpos.com | www.MTENW.MachineToolExpos.com
(469) 586-8384 americas@onrobot.com | www.onrobot.com
Pro-Line Work Benches
Radwell International, Inc.
Pro-Line has been a leader in workbench manufacturers since 1978. Pro-Line offers a wide selection of workbenches that feature a modular designs and interchangeable accessories. Pro-Line continues to be on the leading edge of modular ergonomics.
Radwell International stocks and sells new and surplus industrial automation, MRO, pneumatic, motion, electronic, hydraulic, HVAC and electrical control equipment for plant floor and facilities maintenance machinery. Radwell has full component level repair capabilities for industrial electronic and electrical equipment.
(800) 739-9067 bench@1proline.com | www.1proline.com
(800) 332-4336 sales@radwell.com | www.radwell.com
RAS Machine Tool Technologies, Inc.
RHH, Inc.
RAS Machine Tool Technologies is your one-stop CNC shop; serving Machine Tool Builders/Dealers/End Users and Service Companies. Contact RAS to help you find those hard-to-find Japanese, Taiwanese & Korean Machine Tool parts and accessories.
Specialists in fine pitch Carbide Gear Hobs, Gear Shaper Cutters, Spur + Helical Master Gears. Our precision line of TRU-VOLUTE gear products are known for reducing setup times, improving gear quality, and producing more parts per regrind. Quality Products Since 1915
(413) 323-9041 sales@rasmachinetool.com | www.rasmachinetool.com
(201) 226-9000 gears@tru-volute.com | www.tru-volute.com INDUSTRIAL MACHINERY DIGEST.COM
IMD | 45
Featured Suppliers Salinger Electric Co.
Scotchman Industries
Salinger Electric Co., Inc. has been selling quality electrical equipment both new and reconditioned since 1946. We can supply all new, all reconditioned, or a combination of both at very competitive prices. Call or email us with your requirements.
Scotchman is the most trusted hydraulic ironworker manufacturer in the USA, and also builds a complete line of Circular Cold Saws: manual to fully automatic, plus distributor of quality Digital Measuring Systems, Band Saws, H-Presses, and Tube and Pipe Notchers/Grinders.
(248) 585-8330 info@salingerelectric.com | www.salingerelectric.com
(605) 859-2542 info@scotchman.com | www.scotchman.com
Sprinter Marking
Standard Direct.com
Sprinter Marking manufactures a range of machines models that automatically ink code-mark message on a wide range of porous and non-porous surfaces. While very small in physical size, they are designed for rugged industrial operation.
Industrial Grade, All-Welded STEEL Carts, Cabinets, Tables & Work Benches. Shipping points in Illinois, New York, Virginia, Nevada. Standard-Direct.com offers you the best quality and service in the industry with its “more metal” and “quick ship” programs. We offer the industry’s largest selection with OVER 450 models!
(740) 453-1000 sales@sprintermarking.com | www.sprintermarking.com
(800) 622-2692 standardpaul@aol.com | www.standard-direct.com
Stor-Loc
Suhner Industrial Products, LLC
The original heavy duty Modular Storage Drawer Cabinet that was the norm in the industry until the early 1990s is available only from Stor-Loc®. Their durable Modular Drawer Cabinet comes complete with a unique 55 Year Satisfaction Guarantee.
Since 1914, Suhner has offered solutions for specific applications and process improvements in the areas of refining industrial surfaces with their abrasive products, tool holders for machining units that multiply capacity, customized flexible drive shafts, and stamping technology. Remanufacturing Services for Machining Spindles.
(815) 936-0700 sales@storloc.com | www.storloc.com
(706) 235-8046 machining.us@suhner.com | www.suhner-machining.com
Sure Tack Systems, LLC SERVING AMERICAN MANUFACTURERS FOR OVER
Sure Tack Systems, a division of Crist Company, Inc. established in 1980 and offers a diverse product line for your hot melt adhesive equipment and application needs. Whether your need is for high-speed extrusion, wide web spray, slot coating or manual product assembly; STS has a hot melt system to fit your individual needs and budget.
35 YEARS
IndustrialMachineryDigest.com
March 2019
IndustrialMach ineryDigest.co m
IMPACTING DROP ZONE
July 2019
June 2019
2019 Feat ured Sup » 2019 pliers Annual Supplie rs Guid e Listings
the
m ineryDigest.co IndustrialMach
INGE GOB IL
(800) 580-2803 info@suretacksystems.com | www.suretacksystems.com
» Don’ t Fear The Robotics How the coming automatio changing n revolutio the work force, for » Enab n ling On-T the bette is r he-Fly The New Product Era of Experts: Sales and Manufac Marketing turing in »
Syclone ATTCO Service (Sky Hook)
Wildeck Provides Increased Safety for Moving Palletized Loads » Empowering Employees
MO
ESAB lies on bile ens Re g Kitch to Feed the Mo Cruisin Welders Mobile Boom Vending Parts Long Large or hining » Mac Set-up Single with a efits ning Ben ers k Belt Trai Their Custom » Blac ies and pan Com turing Manufac ng erican » An Am Still Going Stro , Legacy
» Surpassing Energy Savings Manufacturer in Oxnard, CA experiences the benefits of Green Hydraulic Power Units
Manufacturer of the Sky Hook, a small, portable, ergonomic lifting device designed to provide safe, high quality lifting solutions that can assist in applications involving hard to reach loads up to 500 pounds. Proudly family owned and operated since 1969.
» Lifting Higher Combi-PPT - A High Capacity Powered Pallet Truck
» Streamlining Control Siemens Offers Optimized Control Panel Construction to Machine Tool Builders
THIS IS SOME TEST HERE MANUFACTURING SHOWCASE:
TAP ASSOCIATES INC A Good Tool Is Like A Bar Of Gold
THIS IS SOME TEST HERE THIS IS SOME TEST HERE THIS IS SOME TEST HERE
SE: OWCA Y PAN RING SH FACTU CTURING COM MANU UFA
THIS IS SOME TEST HERE
ESTA AND IS BLISHED IN 1986 THE INDU STRY’S Mo
Life Y MAN Built for KENNED Purpose, Built with
st Extens Indust ive Publica rial tion
SERVIN AMERIC G AN MANUFACTURE FOR OVER RS
33 YEARS
Industrial Machinery Digest | Established in 1986 and is the industry’s
(208) 365-5770 sales@skyhookmfr.com | www.skyhookmfr.com
MOST EXTENSIVE INDUSTRIAL PUBLICATION
Tap Associates, Inc. The innovative Self-Locking “Jüngere” design has offered the smallest OD Tap Extension in the industry. For that reason, it is the preferred solution for close quarter and long tapping applications.
SUBSCRIBE & Stay Informed
(800) 566-4827 info@tapextension.com | www.tapextension.com
www.IndustrialMachineryDigest.com IMD-FP-022021.indd 1
46 | IMD | Q2 2021
11/17/20 8:10 AM
IMD – The Industry’s Most Extensive Industrial Publication
The Caldwell Group, Inc Caldwell is the leading manufacturer of below the hook lifting solutions. We provide the most effective material handling solutions available. Our team of employee-owners take the time to understand your application. This understanding allows us to apply our experience and provide the most effective material handling solution available.
(800) 628-4263 contact@caldwellinc.com | www.caldwellinc.com
Tormach, Inc. At Tormach, our mission is to empower people who make things. We are dedicated to providing exceptionally engineered compact CNC machines, tooling, and related products with best-in-industry technical support and customer service.
IF YOU HAVE AN EDGE… WE HAVE A TRIM! FREE SAMPLES
FREE CATALOG
Test Our Trims and Seals for Quickly View Our Most Popular Fit and Function Lines of Trims and Seals
DESIGN ASSISTANCE Let Us Help You Find the Right Trims and Seals
(608) 849-8381 info@tormach.com | www.tormach.com
Trilogy Machinery, Inc. Trilogy Machinery, Inc. is committed to bringing the highest standards of professionalism, integrity and service in order to achieve a reputation as a leader in the metal fabricating machinery industry. Trilogy proudly offers products from Italy, Sweden, Turkey, and Taiwan.
(410) 272-3600 sales@trilogymachinery.com | www.trilogymachinery.com
Trim-Lok, Inc. Trim-Lok, Inc. manufactures high-quality plastic and rubber extruded trim and seal profiles. From plastic edge trims to sponge rubber seals, our profiles add protection from rough edges while sealing out moisture and debris with a clean, finished look to your application. In-stock profiles and custom engineering is available.
(888) 874-6565 info@trimlok.com | www.trimlok.com
TS3, LLC TS3 – The Saw Sales and Service Company – provides all aspects to support for your saws - Names you know and trust – Amada, Marvel, Tigerstop, MK Morse, and many more. New machine sales, on-site repairs, applications and replacement parts. TS3 - factory trained or factory authorized in many current and former saw manufacturers.
(612) 503-8670 ts3machine@gmail.com | www.ts3machine.com
US Metal Crafters, LLC American-owned and operated, US Metal Crafters knows the right supplier transforms your supply chain. Our broad service offering coupled with our commitment to quality & on-time delivery will transform & simplify yours. Laser cutting, stamping, fabrication, assembly, powder coating, tool & die services, and more all under one roof!
(336) 861-2100 info@us-metalcrafters.com | us-metalcrafters.com
Same Day Shipping on Thousands of Parts
CALL US TODAY!
800-663-9507
HEADQUARTERS MIDWEST MANUFACTURING 6855 HERMOSA CIRCLE 1642 GATEWAY COURT BUENA PARK, CALIFORNIA 90622 ELKHART, INDIANA 46514
WWW.TRIMLOK.COM INFO@TRIMLOK.COM INDUSTRIAL MACHINERY DIGEST.COM
IMD | 47
Featured Suppliers
2021 ANNUAL
SURPLUS GUIDE
FEATURED SUPPLIERS
Aaron Industrial Services
AMCbid.com
At Aaron Industrial Solutions, we understand that liquidating/transferring assets isn’t a one-size-fits-all scenario. Aaron Industrial Solutions is your trusted source for Equipment Auctions, Liquidation Sales and Asset Management Services.
At Auction Management Corporation, we understand the importance of liquidating your asset in a timely and professional manner. When we take your property to auction, we invest our time and resources into generating willing and able buyers that are qualified to bid on your asset.
(630) 350-2200
(780) 980-9565
jbersh@aaronauctions.com | www.aaronauctions.com
info@amcbid.com | www.amcbid.com
Arizona Auctioneers LLC
BidIndustrial.com, LLC
For over 70 years THE ARIZONA AUCTIONEERS have provided a time-tested, skilled appraisal and auction service – The vital link between Buyer and Seller! For business owners who wish to dispose of complete or partial inventories or equipment!
BidIndustrial.com provides online auctions at a local, national, and global reach for industrial machinery, heavy commercial equipment & commercial real estate.
(602) 258-6981
(888) 777-9888
steve@arizonaauctioneers.com | www.arizonaauctioneers.com
info@bidindustrial.com | www.bidindustrial.com
BTM Industrial
Capital Recovery Group, LLC
Our overall goal at BTM Industrial is to develop and nature relationships that allow our customers to receive maximum value for your company and asset disposition needs. Whether your company defines value as quick turnaround, convenience or cash, we understand that true value is meeting and exceeding your production needs!
CRG is a global private equity firm that creates liquidity for its clients through expertise, innovative solutions, and access to worldwide markets. Specializing in complex scenarios comprised of industrial assets and real estate, we revitalize idle or marginally productive assets and liquidate surplus.
(616) 745-5953
(860) 623-9060
sales@btmindustrial.com | www.btmindustrial.com
info@crgllc.com | www.crgllc.com
48 | IMD | Q2 2021
Featured Suppliers Centra Corp.
Cincinnati Industrial Auctioneers, Inc.
Centra Corporation has been selling machinery Since 1988, The President Michael DiBlasi has been selling machinery for over 25 years and is a Certified Machinery & Equipment Appraiser (AMEA).
CIA is a nationwide provider of asset disposition, auction and appraisal services. Our expert services are rendered to a variety of organizations. A fifty year history with thousands of satisfied clients and customers, has afforded our company a reputation that is second to none in the industrial auction business.
(410) 945-0040
(513) 241-9701
sales@centracorp.com | www.centracorp.com
info@cia-auction.com | www.cia-auction.com
Compass Auctions & Real Estate
DeCosmo Industrial Auctions
Compass specializes in industrial and job completion surplus auctions. Every month Compass auctions machinery, heavy equipment, contractor grade tools and more! Our multi-platform system coupled with the ability to auction your items in place makes for a fast, convenient way to sell your items and put profit back into your business.
Our primary focus is to help you understand today's market and which auction format fits your needs to maximize your financial return. Whether it is an Online or Onsite/Webcast style auction, we have a knowledge of values along with current market conditions second to none in the industrial auction world.
(800) 729-6466
(413) 530-0019
info@soldoncompass.com | www.soldoncompass.com
info@diauctions.com | www.diauctions.com
Denver Breaker & Supply
Harbor Machinery, Inc.
Denver Breaker and Supply was established in 1984 and has always had a "Customer First" approach of doing business. They provide new and reconditioned electrical equipment and guarantee the finest quality and best prices you can find in the business.
Harbor Machinery Inc. buys and sells all types of manufacturing machinery and equipment. In addition, we offer full auction services, brokerage services, consignment and appraisal services. Our expert knowledge of the manufacturing industries and their use of machine tools enables us to achieve high net returns for our customers!
(800) 544-7375
(231) 526-9525
sales@denverbreaker.com | www.denverbreaker.com
sales@harbormachinery.com | www.harbormachinery.com
Harris Auctions
Henderson Auctions
Harris Auctions is a specialist in surplus asset management. We utilize online only auctions, live webcast, and live on-site auctions, and have an aggressive marketing system to reach a wide audience of bidders. Harris Auctions also participates in other auctions by providing high quality, consignment items to those auctions.
Henderson Auctions is one of the oldest equipment auction firms in existence and is recognized as a leader in the industry. We specialize in heavy construction machinery auctions, truck and trailer auctions, mobile home auctions, travel trailer auctions, industrial equipment auctions, and real estate auctions.
(713) 462-5800
(225) 686-2252
jeanjr@harris-auctions.com | www.harris-auctions.com
auctionoffice@hendersonauctions.com | www.hendersonauctions.com
HMI Asset Sales
Industrial Auction Services, LLC
Harbor Machinery Inc. buys and sells all types of manufacturing machinery and equipment. In addition, we offer full auction services, brokerage services, consignment and appraisal services. Our expert knowledge of the manufacturing industries and their use of machine tools enables us to achieve high net returns!
Industrial Auction Services, LLC acts as an agent or principal in the conversion of industrial machinery, tooling and related assets into cash, through public auction, privately negotiated sale, or a combination of both.
(231) 526-9525
(848) 229-2500
sales@harbormachinery.com | www.harbormachinery.com
sales@ind-auctions.com | www.ind-auctions.com
Infinity Asset Solutions
James G. Murphy Co.
Infinity Asset Solutions is your Full-Service Asset Solutions provider for AUCTIONS, LIQUIDATIONS AND APPRAISALS. We serve businesses of all sizes in a variety of industries. Our team of experienced professionals are ready to help you obtain the best value for your assets.
Since 1970, JGM has conducted thousands of NO MINIMUM NO RESERVE auctions throughout the USA. Our past experience auctioning items and businesses from various different industries is what sets us apart from our competitors. JGM brings its past experience and wide range of industry specific knowledge and advertising to every auction!
(905) 669-8893
(425) 486-1246
info@infinityassets.com | www.infinityassets.com
Ray@murphyauction.com | www.murphyauction.com INDUSTRIAL MACHINERY DIGEST.COM
IMD | 49
Featured Suppliers Joiner Sales Corp
KD Capital Auctions LLC
Longevity earned from a track record of many successes! Joiner Sales Corp has over 44 years of experience in providing market leading industrial auctions and appraisal services coast to coast in Canada. We are a family team of experienced industrial auctioneers and machinery appraisers. We work to make every client a reference client.
KD Auctions has over 100 years of combined experience in market place knowledge, equipment valuations, international experience, preparing machinery for viewing, marketing and selling, making KD Auctions the right choice for your next auction! With our experienced staff we can help alleviate some of the stress involved in the process!
(604) 852-8711
(480) 922-1674
info@joinersales.com | www.joinersales.com
service@kdauctions.com | www.kdauctions.com
Kingfish Capital Advisors, LLC
Lee Stevens Machinery, Inc.
Kingfish Capital Advisors, LLC is a national appraisal and valuation firm for machinery and equipment. Our ASA and AMEA appraisers provide expert advice for asset disposition, acquisition, tax challenges, estate planning, banking and management requirements. We are Accurate. Ready. Reliable.
For close to 70 years, Lee Stevens Machinery, Inc. has been providing solutions to manufacturers worldwide for their machine tool needs. Their services range from buying and selling used machine tools to appraising, brokering, marketing, leasing and financing production equipment.
(401) 792-4300
(248) 926-8400
valuation@kingfishcapital.com | www.kingfishcapital.com
info@stevensmachinery.com | www.stevensmachinery.com
Levy Recovery Group
Machinesused.com
With over 30 years experience in the machinery business, our management team has been instrumental in some of the industry's most coveted sales, responsible for over $50 million in direct sales. We hope that you'll give us an opportunity to show you that "Complete Asset Solutions" is not just a tag line – it's what we deliver.
Machinesused.com has been providing affordable and reliable used machines for sale across the US for over 18 years. We provide a variety of models and brands of used machines which include, Haas, Mazak, Fadal, VMC, Grinders, Inspection Equipment and Rotary Tables. We will also buy, trade-in, online auction or consign your used machines.
(248) 914-4226
(763) 745-1166
sales@levyrecovery.com | www.levyrecovery.com
sales@machinesused.com | www.machinesused.com
Moecker Auctions, Inc.
Perfection Industrial Sales
Moecker Auctions, Inc. is licensed, bonded, & fully insured and maintains a staff of experienced personnel to administer and facilitate its operations. With combined experience of over 40 years in auctions and appraisals, Moecker Auctions offers a unique approach to auctions, appraisals and liquidations.
Perfection Industrial Sales excels in performing live and online industrial machinery auctions. Whether you are looking to sell one machine or an entire facility. We want to partner with you to ensure your next auction or liquidation project is both seamless and profitable.
(954) 252-2887
(847) 545-6374
info@moeckerauctions.com | www.moeckerauctions.com
sales@perfectionindustrial.com | www.perfectionindustrial.com
Pressbid Auction, LLC
Prestige Equipment
PressBid Auction, LLC conducts complete plant liquidations and online auction sales in North America. We serve the metal stamping, fabricating, roll forming, tool and die, prototype, machining and plastics industries.
Founded in 1990, Prestige Equipment is a worldwide leader in the procurement and sales of metalworking machinery, fabricating equipment and complete manufacturing facilities. Related services include both online and on-site auctions and liquidations, asset management programs, appraisals, financing, plant turnaround and business sales.
(248) 268-1603
(631) 249-5566
sales@universalpress.com | www.pressbid.com
sales@prestigeequipment.com | www.prestigeequipment.com
Prime Machinery, Inc.
RAAR Group USA Inc
Prime Machinery is one of the nation’s most trusted quality used machinery dealers specializing in buying and selling vertical and horizontal boring mills, CNC machining centers, CNC turning centers, lathes, EDM's and fabricating equipment.
Since 1988, RAAR Group USA has been conducting auctions in North America in all types of industrial categories such as machine tools, presses, power generation equipment, railroad, aerospace and automotive. We guarantee that we are the most transparent and honest!
(516) 922-7977
(310) 487-3800
sales@primemach.com | www.primemach.com
rick.raargroup@gmail.com | www.raargroupusa.com
50 | IMD | Q2 2021
IMD – The Industry’s Most Extensive Industrial Publication
Rabin Worldwide, Inc.
Resell CNC Auctions
Rabin is a family-held industrial auction and real estate investment company, with a focus on the acquisition and sale of industrial equipment and facilities around the world. As leading industrial and commercial liquidators, Rabin has sold equipment assets in every trade sector and on almost every continent.
Our online, timed auctions are a terrific way to buy and sell used CNC machinery, tooling equipment, plant support equipment, and ancillary items. Whether you are looking to buy or sell a single item or an entire facility, we can help you. We even help facilitate the logistics of prepping, loading, and shipping the items sold
(415) 522-5700
(844) 478-8181
info@rabin.com | www.rabin.com
sales@resellcnc.com | www.resellcnc.com
Salvadore Auctions, Inc.
SIGMA Auction
Salvadore Auctions, Inc. provides full service online, live and simultaneous webcast auctions for machinery & equipment nationwide. Metalworking equipment, water well drilling equipment, machine shop and commercial and industrial assets. Whether buying or selling assets contact us first.
For over 20 years, the SIGMA Group of companies have established themselves as one of the leading industrial reselling and auction companies in the world. SIGMA Auctions is dedicated to providing professional, organized, and profitable auction services to the industrial and commercial equipment market.
(401) 792-4300
(812) 308-6400
auctions@siaai.com | www.siaai.com
jrivera@sigma-auction.com | www.sigma-auction.com
Stone Auctioneers & Appraisers
UPM, LLC
From manufacturing and transportation equipment to inventories and real estate, Stone Auctioneers & Appraisers’ specialized training and affiliations allow them to offer asset marketing, appraisal and consulting services in plastics, metalworking, construction, transportation, and more.
UPM, LLC is a stocking used machinery dealer specializing in buying and selling metal stamping and fabricating equipment. We will buy a single machine or an entire facility. Our three generations of family have been in the used machinery business since 1963. UPM also has a Certified Equipment Appraiser on staff
(205) 373-1130
(248) 268-1603
auctioneer@stoneauctioneers.com | www.stoneauctioneers.com
sales@universalpress.com | www.universalpress.com
Westbrook Asset Management Westbrook Asset Management is a full-service industrial auction and liquidation company. We offer a wide range of programs for sellers to quickly turn their surplus machinery and equipment into cash. Our marketing team will customize a program that is designed to bring maximum exposure to every asset we sell on your behalf.
(800) 899-8182 info@westbrook-eng.com | www.westbrook-eng.com
Winternitz Industrial Auctioneers & Appraisers National asset disposition services firm considered one of the nation's leading and most successful industrial liquidation firms, and industry pioneer. Auctions conducted throughout the United States, Canada, and Mexico.
YOUR COMPLETE AUCTION RESOURCE With our user-friendly website, users can easily find the type of auction they are looking for, regardless of size or location. The site has the latest technology to make it simple for users to engage with an auction of interest.
(847) 272-0440 charlie@winternitz.com | www.Winternitz.com
Workingman Capital Corp. Workingman Capital Corp. provides personalized solutions to industrial business problems. Be it asset monetization, valuation or strategic sale, professional advice is essential when your business needs assistance. With offices in Toronto and Chicago, we look forward to meeting you.
Subscribe now to receive FREE news on upcoming auctions!
(416) 847-7336 info@workingmancapital.com | www.workingmancapital.com INDUSTRIAL MACHINERY DIGEST.COM
IMD | 51
Mention SBSDA2021 for a 10% Discount!
YES...We Have That!
Denver Breaker & Supply One of the Nation’s Largest Inventory of NEW, Obsolete, Inspected & Tested Electrical Equipment! • Circuit Breakers • Panel Mount Switches • Motor Controls • Bus Duct Plugs • Transformers • Starters • and More!
WE SPECIALIZE IN THE TOP BRANDS & CARRY THE HARD-TO-FIND ITEMS Providing Same Day, Next Day Air Shipments for Emergency Needs!
WE ALSO BUY YOUR USED EQUIPMENT…
CALL US TODAY!
855-4UR-BRKR WWW.DENVERBREAKER.COM All Breakers are Insured and Guaranteed — All Material is Fully Load Tested.
DenverBrakerFP_2021.indd 1 | IMD | Q2 2021 52
Stay Connected
6/22/21 9:26 AM
INDUSTRIAL MACHINERY DIGEST.COM
IMD | 53
SELECT
EQUIPMENT
Industrial Electrical Sales MCC BUCKETS & MOTOR CONTROL CENTERS CUSTOM BUILT MCC BUCKETS • LARGEST INVENTORY IN THE MIDWEST!
WE CAN RETROFIT ANY MAKE AND MODEL OF MCC BUCKET WITH ALL NEW COMPONENTS INCLUDING VFD’S! SOFT STARTERS NEMA & IEC STARTERS
888-459-5191 • SALES@SELECTEQUIPMENT.NET SELECTEQUIPMENT.NET
| IMD | Q2 2021 54SelectEquipment_SBS0917_FP.indd
1
11/21/17 6:22 PM
INDUSTRIAL MACHINERY DIGEST.COM
IMD | 55
56 | IMD | Q2 2021
BTM MACHINERY AUCTIONS Looking for a fair market?
BTM Industrial offers a Monthly Machinery Auction (MMA) and can offer stand alone auctions if a customer has enough inventory to warrant one. Our MMA is where customers looking for fair market value sell their unwanted or decommissioned machinery.
Contact Us For More Information! Email: sales@btmindustrial.com Phone: 616-745-5953
View All Services: Scan QR Code
INDUSTRIAL MACHINERY DIGEST.COM
IMD | 57
classifieds
OIL MIST & SMOKE IN YOUR SHOP? www.mistcollectors.com Tel: 1-800-645-4174
Need Need Work Work Benches Benches Need Work Benches
???
InIn Stock-Factory Stock-Factory Direct In Stock-FactoryDirect Direct
workbenchmarket.com
workbenchmarket.com workbenchmarket.com workbenchmarket.com
ProLine-2RClass-112018.indd 1
10/19/18 11:18 AM
MachineShopWeb.com
...............Visit Online Today!...............
AmericanMachineShop.com ...............Visit Online Today!...............
Only $4575
BoothLocation.com
LCD BATTERY INDICATOR PT33 SERIES
GE NC/CNC Parts & Electronic or Mechanical Field Service
We can RETROFIT your machine!
248-543-8262
www.DHMassociates.com 58 | IMD | Q2 2021
TROY, MI
FAGOR CONTROL • SERVO DRIVES LINEAR SCALES
ENM’s PT33A1 series compact meter with various functions and alert systems is ideal for customers to get the most relevant information from their battery system. The unit has a built in hour meter and service timer, a battery level monitor, and a voltage monitor all designed to gather relevant information about your battery in an intuitive manner. MADE IN THE USA
www.enmco.com
E-MAIL:
customerservice@enmco.com
TOLL FREE: 888-372-0465
E-MAIL: customerservice@enmco.com TOLL FREE: 888-372-0465
Ad INdex Accudyne Products USA — www.ezpullerusa.com ......................................................................... 13 Actek Manufacturing and Engineering Inc. — www.actekmfg.com ............................................ 33 ATTCO, Inc. DBA Syclone ATTCO Service — www.skyhookmfr.com ...............................5, 19, 23 Betenbender Manufacturing, Inc — www.betenbender.com ....................................................... 15 BTM Industrial — www.btmindustrial.com ........................................................................................ 57
SERVING SERVING AMERICAN AMERICAN MANUFACTURERS MANUFACTURERS FOR OVER OVER FOR
33 35 YEARS YEARS
Carell Corporation — www.carellcorp.com ...................................................................................... 35 Combilift, USA — www.combilift.com ................................................................................................17 Cosen Saws, USA — www.cosensaws.com .......................................................................................11 Denver Breaker & Supply — www.denverbreaker.com .................................................................. 52 Design-2-Part Shows — www.d2p.com ............................................................................................40 DHM Associates, Inc. — www.dhmassociates.com ........................................................................58 Dynabrade, Inc. — www.dynabrade.com ............................................................................................ 3 Eagle Bending Machines — www.eaglebendingmachines.com ................................................... 25 ENM Co — www.enmco.com ..............................................................................................................58 Essex Structural Steel Co. — www.essexstructuralsteel.com ........................................................56 H&K Equipment, Inc. — www.hkequipment.com ............................................................................ 53 HYPNEUMAT, Inc. — www.hypneumat.com ................................................................................... IFC IMDauctions.com — www.imdauctions.com ................................................................................... 51 Kanetec USA Corp — www.kanetec.com .......................................................................................... 55
IS YOUR COMPANY LISTED? IMD’s New online Directories. Searchable directories with over 400 categories specifically designed for the industrial machinery industry. IF YOU’RE NOT LISTED, YOU’RE MISSING OUT!
KHK Gears — www.khkgears.us .....................................................................................................25, 37 L&L Special Furnace Co., Inc. — www.llfurnace.com .....................................................................58 Motion+Power Technology Expo by AGMA — www.MotionPowerExpo.com ........................... 7 Northwest Machine Tool EXPO — www.machinetoolexpos.com ...............................................39 Pro-Line — www.1proline.com ............................................................................................................58 Royal Products — www.mistcollectors.com .....................................................................................58 Schweiss Doors — www.schweissdoors.com ..................................................................................58 Select Equipment Company — www.selectequipment.net ..........................................................54 Stor-Loc — www.storloc.com ............................................................................................................. 27 The Caldwell Group, Inc — www.caldwellinc.com ........................................................................... 9 Tormach — www.tormach.com ..........................................................................................................29 Trim-Lok — www.trimlok.com ...................................................................................................... 38, 47 Wisconsin Manufacturing & Technology Show — www.wimts.com ...........................................36 INDUSTRIAL MACHINERY DIGEST.COM IMDdirectory-Listed-TV-01-2019.indd 1
IMD | 59 3/26/19 8:59 AM
Product Index ABB — www.abb.com ............................................................................................................................ 31 ACSYS Lasertechnik — www.acsyslaser.com ................................................................................... 32 ANYbotics — www.anybotics.com ..................................................................................................... 33 Doosan Robotics — www.doosanrobotics.com .............................................................................34 ESAB — www.esab.com ........................................................................................................................ 35 EXAIR Corporation — www.exair.com ............................................................................................... 31 FANUC America — www.fanucamerica.com .................................................................................... 35
SERVING SERVING AMERICAN AMERICAN MANUFACTURERS MANUFACTURERS FOR OVER OVER FOR
33 35 YEARS YEARS
HEIDENHAIN — www.heidenhain.us ..................................................................................................34 KUKA — www.kuka.com ........................................................................................................................36 MAZAK — www.mazakusa.com ........................................................................................................... 37 OnRobot — www.OnRobot.com .......................................................................................................30 Stoecklin Logistics — www.stoecklin.us ............................................................................................34 Suhner Industrial Products Corporation — suhner-machining.com .......................................... 31 Vention — vention.io ..............................................................................................................................30 Yaskawa — www.motoman.com..........................................................................................................38
SERVING AMERICAN MANUFACTURERS FOR OVER
35
IMD’s New online Directories. Searchable directories with over 400 categories specifically designed for the industrial machinery industry.
YEARS
IndustrialMachineryDigest.com
IndustrialM achineryDi gest.com
IMPACTING DROP ZONE
July 2019
» Don ’t Fear The Rob otics How the coming automat changin ion revo g the wor lution is kforce, » Enablin for the g On-The better The New -Fly Pro duct Exp Era of Sales and erts: Manufa cturing Market ing in »
June 2019
2019 Fea tured Sup » 2019 pliers Annua l Supplie rs Guide
the
gest.com achineryDi IndustrialM
March 2019
INGE GOB IL
IS YOUR COMPANY LISTED?
IF YOU’RE NOT LISTED, YOU’RE MISSING OUT!
Listings
Wildeck Provides Increased Safety for Moving Palletized Loads » Empowering Employees
MO
AB s on ES ile s Relie the Mob Kitchen Cruising elders to Feed W Mobile Boom ing Vend rts ng Pa ge or Lo ining Lar -up » Mach Set Single fits with a g Bene lt Trainin eir Customers Be ck Th » Bla ies and Compan turing Manufac g erican on Am Str ing » An , Still Go Legacy
» Surpassing Energy Savings Manufacturer in Oxnard, CA experiences the benefits of Green Hydraulic Power Units
» Lifting Higher Combi-PPT - A High Capacity Powered Pallet Truck
» Streamlining Control Siemens Offers Optimized Control Panel Construction to Machine Tool Builders
THIS IS SOME TEST HERE MANUFACTURING SHOWCASE:
TAP ASSOCIATES INC A Good Tool Is Like A Bar Of Gold
THIS IS SOME TEST HERE THIS IS SOME TEST HERE THIS IS SOME TEST HERE
SE: OWCA ING SH G COMPANY FACTUR MANU Y MANUFACTURINLife for e, Built KENNED h Purpos Built wit
THIS IS SOME TEST HERE
ESTABL AND IS ISHED IN 198 THE IND USTRY’S6
Most Ex tensive Indus Publica trial tion
SERVING AMERICAN MANUFACTU FOR OVERRERS
33 YEARS
Industrial Machinery Digest | Established in 1986 and is the industry’s
MOST EXTENSIVE INDUSTRIAL PUBLICATION
SUBSCRIBE & Stay Informed www.IndustrialMachineryDigest.com 60 | IMD | Q2 2021 IMD-FP-022021.indd 1
11/17/20 8:10 AM
IMDdirectory-Listed-TV-01-2019.indd 1
3/26/19 8:59 AM
