West Coast Edition A2Z Manufacturing Magazine June-July 2020

Vol. 10, No. 3 JUNE / JULY‘20 COVER STORY Pages 15-16

West Coast Edition For WA, OR, & CA

Foresight Finishing Has Placed Itself At The Forefront Of The New Push In The Electronics Industry To Not Only Be Nadcap Accredited For Plating, But Also Nadcap Accredited For Heat Treat A2Zmanufacturing.com

A2Z MANUFACTURING WEST COAST •

1 • JUNE - JULY ‘20

888 - THINBIT • 888-THINFAX • THINBIT.COM

EXTERNAL FACE GROOVING

EXTERNAL GROOVING

SPECIAL TOOLING

BORING

DOVETAIL FACE GROOVING

FORM TOOLING

INTERNAL GROOVING

INTERNAL THREADING

INTERNAL FACE GROOVING

PROFILING

EXTERNAL GROOVING

ACME THREADING

Introducing THINBIT

®

FOR MILLLING • FASTER • MORE OPTIONS • LESS EXPENSIVE • LASTS LONGER

Swift Tool Co. Inc.

KENT 800-562-0900 KENT@SWIFTTOOL.COM SEATTLE 800-700-2801 SEATTLE@SWIFTTOOL.COM

We stock a wide selection of Norton cut-off & grinding wheels, flap discs & wheels, sanding sheets and belts, cartridge rolls, a variety of sanding discs & much more!

Pack of 4 - 6 X 48” $61.95!

AB384X48XMEDAODNR

ARL020XMEDAONR Box of 25 - 2” discs $25.95!

ARL030XCRSAPNR Box of 25 - 4” discs $75.95!

Bag of 100 - 1 X 2 X 1/4”

$179.95!

9 X 5/8” $9.95!

AT279024AO8TGRRNR

4-1/2 X 5/8” $2.95!

ACRST16H8080AONR

AT274524AO4TGRRNR

2 X 1 X 1/4”

$2.95!

FW032K2S080AGSNR

Part # A0701501WA060JNVCG A0702501PA046HNVCG Surface Grinding Wheel A0702501BA046JNVCG • White Aluminum Oxide A0702501BA060JNVCG • 3,600 maximum RPM • Balanced cool cutting A0702501WA080KNVNR A0802501WA060KNVCG

Mini Flap Disc • Zirconia alumina grain with heat treated backing for longer disc life • 24,000 maximum RPM

Sanding Pads Premium non-woven hand pads for basic surface preparation • Sold in packs of 10

$4.95!

AFDT274580AOTFNR

Description 7” X .25” X 1.25” – 60J Grit 7” X .50” X 1.25” – 46H Grit 7” X .50” X 1.25” – 46J Grit 7” X .50” X 1.25” – 60J Grit 7” X .50” X 1.25” – 80K Grit 8” X .50” X 1.25” – 60K Grit

Part # AFDT272080ZARCCG AFDT273040ZARCCG AFDT273080ZARCCG

Part # AP6X9.5MDAOJI AP6X9.5CSAOJI AP6X9.5VFNSCJI AP6X9SFNAOCG AP6X9.5FNAOJI

4-1/2 X 5/8”

Description 2” - 80 Grit 3” - 40 Grit 3” - 80 Grit

Description 6” X 9.5” Medium Hand Pad 6” X 9.5” Hvy Duty Hand Pad 6” X 9.5” Very Fine Hand Pad 6” X 9.5” Light Duty Hand Pad 6” X 9.5” General Cleaning Pad

SALE! $12.95 $15.95 $14.95 $14.95 $24.95 $17.95

SALE! $2.05 $2.95 $2.95

SALE! $20.95 $20.95 $22.95 $8.95 $13.95

• Cutting Tools & Abrasives • Lubricant, Coolant & Solvents • Tool Vending • PVD Coating • Laser Marking • 5 Axis CNC Tool Remanufacturing • Machining Supplies, Tool Holding • Huge Inventory In Kent & Seattle

Editor’s Corner Standing Still is Actually Moving Backwards “Life is like riding a bicycle, to keep your balance, you must keep moving.”

Albert Einstein “If you can’t fly then run, if you can’t run then walk, if you can’t walk then crawl, but whatever you do you have to keep moving forward.”

Martin Luther King Jr. “To me, I will be a stronger person if I’m moving forward, doing the work I want, and continue to drive: force the purpose that I want to create versus doing what other people think I should be doing, which is never a way to live.”

Payal Kadakia The United States story has been on the evolution of moving forward since its beginning. Our forefathers all stumbled, some fell, and the American dream willpower drove us forward and propelled us to another day and a better way. But what about the other 7.4 billion people on planet earth?

There has always been a left and a right, a Yin and a Yang, and for the last 61 years, 50 states with their own state flag, flying beside their team flag, the USA flag.We tend to forget we are individuals, on the same team, and an integral part of humans, on planet earth.

As individuals we strive for what’s best for us in order to meet our potential, and to feel worthy of the air we breathe. We all experience physical, mental, and spiritual roadblocks on our journey forward, but we must keep moving forward. As individuals we realize we are part of a large group of humans co-residing on earth with shorter and longer fingers and toes. Earthlings vary in stature, language, beliefs, color, and ego. If you came from another planet to earth you might look at these very similar earthlings and say to yourself; they all look alike. This would be a valid statement coming from an extraterrestrial and something most of us take for granted every day. We are similar.

Forward thinking, and moving forward as an individual gives us a great opportunity to sneak a peek over our shoulder and look at where we came from in order to measure our progress.

We also grow healthier in the mind, body, and soul department as we socialize with our fellow earthlings.

The terrestrial team of the future will look even more alike, and will uplift and edify their teammates, while pushing forward to a better today ensuring tomorrows’ positive evolution.

As a citizen of earth we see change comes in the proportions of the equivalence we are able to crawl or walk. People are all different, but all the same. Universal diversity.

As we all take our 365-day ride in space around the sun we need to put things in perspective.

It has taken millions of years to get where we are today and most everything in this world changes every day. We need to peddle that bike forward and if we fall down, dust ourselves off, get back on and pay attention, focus, peddle the bike. We need to eventually fly to the greatest heights of our imagined self and our united oneness.We must not worry about where our team is in the evolutionary process, but offer terrestrials a helping hand when we can, keeping the other hand for ourselves, remaining focused on our purpose and our gift as a being, in a world of near 8 billion similar people.

Until next issue, God bless all of our first responders, troops, and the great people that help us keep pedaling forward.Thank you for your continued support of our manufacturing magazines.

Kim Carpenter

A2Z MANUFACTURING WEST COAST

• 4 • JUNE - JULY ‘20

Cover Foresight Finishing has placed itself at the forefront of the new push in the electronics industry to not only be Nadcap accredited for plating, but also Nadcap accredited for heat treat.

Announcements/Releases.................... 6-14 Feature Articles......................................1,16 Buyers Guide Equipment Services......32-38 Buyers Guide Processes.......................39-45 Card Gallery.........................................32-45 Index Of Advertisers................................46 Editorial................................... Throughout

Published by: A2Z Manufacturing West Coast PUBLISHERS/EDITORS Kim Carpenter & Linda Daly Kim@A2ZManufacturing.com

Mail Address: 1538 E. LaVieve Ln. Tempe AZ 85284 Telephone: (480) 773-3239

Website: www.A2ZManufacturing.com E-mail:Kim@A2ZManufacturing.com

CONTRIBUTORS

Linda Daly, Stephen Hannemann, Hugh Taylor, Eugene Wirth Published bi-monthly to keep precision manufacturers abreast of news, contracts, trends, and to supply a viable supplier source for the industry.

Circulation: A2Z Manufacturing West Coast maintains a master list of over 14,000 decision makers consisting of fortune 1000 companies, small manufacturing companies, engineering firms, DOD & Scientific Lab facilities, machine shops, fab-shops, and secondary source businesses. It has an estimated pass on readership of more than 25,000 people. The majority of our readers are based in CA, OR, WA area!

Advertising Rates have remained the same since 1999, deadlines and mechanical requirements furnished on our website at: www.a2zManufacturing.com.

All photos and copy become the property ofA2Z Manufacturing.

The Publisher assumes no responsibility for the contents of any advertisement, and all representations are those of the advertiser and not that of the publisher.

The Publisher is not liable to any advertiser for any misprints or errors not the fault of the publisher, and in such event, the limit of the publisher's liability shall only be the amount of the publishers charge for such advertising.

Intel to license Rivet’s will software customers secondary manufacturing locations are imperative throughout the production Waking lifecyclethe line’: At plans the same time, Boeing bringtoback the 737as Boeing CFO Reveals How Renton Factory well as develop new products and build Intel’s Wi-Fi to mitigate risk for products. Many medical device companies, for instance, made this Max production and make new airplanes again. CEO David Calhoun WillaRestart Max Line by identifying secondary portfolio.

Walker noted that Intel is active in developing secondary support priority forThe future737 product development said recently Renton could restart this month. the next generation of Wi-Fi technology, Wi-Fi 6, and manufacturing sources for line-down emergencies, or even when they were in need of a Returning the 737 Max to airline service and restarting the Boeing Boeing will beginadvocating “waking up line6astandards. little earlier than return to forthe Wi-Fi “Intel hasthe been investing bridge-tooling resource.

It is critical we continue to build and reinforce our supply chains Renton factory where the now grounded single-aisle jet is made will service,” Smith said.

“If we gain confidence in that timeframe of when and contributing to the evolution of Wi-Fi for more than with the learnings andofpartnership involve a mountain milestones.from these last few months, as industry ramps up in the grounding will be lifted, and start to 20 years, and that’s today when we’re we’ll excitedreassess to announce another the aftermath of COVID-19. wake the line up.”

So says Boeing ExecutiveVice President and Chief Financial Officer Greg leap forward,” Walker wrote about the deal.

We’re in who an unprecedented our nation’s history, and manufacturers off all sizes Smith, has describedchapter in detailin how that would be accomplished, been building outthe its sprawling portfolio of are stepping up to help a need for critical supplies devices. InThere order are to three Intel a fact its suppliers and fill Boeing investors havemedical wondered aboutand as goal Max has assembly lines inside 737technology factory beyond were its core chip making capturewill more the overall meet standards, between manufacturers, medical postsregulatory keep moving and thepartnerships aerospace market keeps changing. experiencedwhere 12,000 workers employed.

Thetorestart be of slow. computing ecosystem that requires data be stored, moved device manufacturers and suppliers should be formed—each providing a vital service Smith outlined of Boeing’s planscale during a Cowen and resources analyzed. These adjacencies areand important and function vitaldetails to building medicalstrategy suppliesand at the needed to defeat COVID-19.

“We will bring the back so-called to the first position, then and Co. conference. elements to the strategy.Within the company’s Disruption is inevitable, but will we learn and adapt during the journey?Chris Stevens is bring the gradually line back upcompany’s in a very smooth, methodical fashion that ultimately we’ll build on,” Smith PC business unit thesesaid. adjacencies made up 40 percent a He senior andbedevelopment Protolabs. saidresearch there will three keys asengineer Boeing at prepares for the 737 Max of year-over-year revenue growth in the first quarter. global grounding to be lifted. The grounding, which came 14 months ago after twoIntel crashesBuys of theAustin jet killed Networking 346 people, stopped airline Boeing recently shared detailsinclude of its 737 Max production restartplatform, goals Adjacencies modem, home gateway Company deliveries and forced a January production halt. The crisis has cost with suppliers, warning were “for planning purposes only” and wirelessdetails communications and wired connectivity.

Boeing tens of billions of dollars. not Rivet a commitment.

Intel announced last month that it acquired Wi-Fi hardware and software maker “Wi-Fi connectivity has become more essential than Networks a moveBoeing that will chipairlines maker’s Return toinservice: willboost needthe to help getwireless already offerings. delivered relyaon it toinwork, teach, learn andJuly stay Boeing aims to ever build as to we 21 jets month May and June.

From 737 Max jets safely back up into the air and earning revenue again. connected,” Walker wrote. reliable and secure Wi-Fi Austin, Texas-based Rivet’s products are used to maximize Wi-Fi bandwidthtouse and December, 2020, that drops to only 14“Fast, monthly.

In 2021, the rate connectivity is a necessity for keeping up as we add more optimize network connections.

The company’s team is joining Intel’s Wireless Solutions returns to 21.

By June 30, 2021, it rises to 28 aircraft monthly, and Delivering the Max: The jet maker will then turn its focus to more connected devices and higher bandwidth applications for Group within its PC business.

The two companies had already worked closely together to 35 monthly by end of 2021. than 400 other undelivered 737 Max aircraft that are parked and stored gaming, video streaming and content creation, as well as develop the Moses Killer AX1650 Wi-Fi product.“Rivet Networks is a terrific in Seattle, Lake, Renton, Everett and elsewhere across North complement to for processing sizes.”

Earlier our existingThose Wi-Fijets products us further vision of PC platforms that America. need and to behelps prepared and our delivered todelivering customers.

By end of June 2022, that rises toincreasingly 42 monthly. larger By earlyfile 2023, Boeing aimsthis Intel acquired multimodal tripthe planning app maker Federal Aviation Administration inspectors will each 737 Max vice president to make 47 Maxs.month Finally, it hits 52 – achieved before Max crisis – in power every person’s greatest contribution,” said oversee Chris Walker, corporate delivery.

Moovit $900 million. the final quarter of 2023. for

By Andrew McIntosh – Puget Sound Business Journal and general manager of mobile client platforms.

541 • JUNE • July- /JULY Aug‘20 2020

A2Z MANUFACTURING WEST COAST A2Z MANUFACTURING SW• •

Announcements & Releases Frontier Group Passes Nadcap Audit Frontier Group is the leading Arizona-based provider of metal finishing ser vices to the aerospace & defense and other industries including medical, commercial, industrial, and automotive. Since our founding in 1979, Frontier Group has delivered unrivalled quality and service to its long-standing customer s across the southwester n U.S.We are privately held and owned by our management team. This means as a pure metal finishing and welding company, we are not machining or assembling parts in competition with our customers – our only focus is to provide the A2Z MANUFACTURING WEST COAST •

6 • JUNE - JULY ‘20

best quality, delivery and communication to our customers.We are uniquely qualified to serve your special processing needs as Arizona’s only independent special processing service provider that is Nadcap accredited to offer Chemical Processing, Non-Destructive Testing, and Welding services.

Frontier Group continues to add to their precision arsenal of expertise. They have added Electroless Nickel Plating as a fully Nadcap accredited capability. They also have a new XRF inspection measuring machine.

We offer a variety of services including: Anodize, Chem Film, Electroless Nickel, Paint (Primer and Topcoat), Passivation, Phosphate (Manganese and Zinc), Complex Masking, Fluorescent Penetrant Inspection, Magnetic Particle Inspection, Pressure Test, Hardware Assembly, Helium Leak Test, High Humidity Testing, Salt Spray Testing, Fusion Weld, Torch Braze, Glass Bead, Media Blast We operate two full-service locations (Phoenix and Chino Valley) and are equipped to offer pick-up and delivery service to ensure the fastest delivery times.

For more information on Frontier Group contact them at: Phone: (602) 437-2426, Fax: (602) 437-2088,

Announcements Continued

STEEL ALUMINUM STAINLESS COPPER NICKEL

Albina Co., Inc. “Your Steel Bending Experts” Hello Customers, HOW DID YOU DO THAT? Leading up to the events of the last three months, you could often find us giving tours to customers and vendors in our shop. We were always willing to share our love of steel bending with those that were interested in learning about the process or for those who just wanted to check out the big machines, see some really big pieces of steel, or just gain a better understanding of what we do and how we do it. Since personal visits and tours are on hold for now, we took the opportunity to put together a virtual tour of our shop and office which will include exterior ariel footage of our shop, office and yard as well as hovering footage above some of our machines in action. Ever wondered how we bent that steel.....stay tuned for the full Virtual Tour coming this summer. Check out the trailer below for a sneak peak of what’s to come....

YOUR METAL BENDING EXPERTS CONSISTENT, ACCURATE & REPEATABLE PARTS

FOOD & BEVERAGE

TANKS

COILS

Preview of Summer Tour at: https://youtu.be/UE6yUvjUvqY WE ARE OPEN & WE ARE HIRING

HEAT EXCHANGERS

PIPE SPOOLS

Albina Co., Inc. remains OPEN and is a key supplier in our nation’s supply chain. We are very busy and are looking for qualified workers to join our team. If you know of anyone interested in working at the best bending company in North America please contact HR at HR@albinaco.com.We are interested in experienced Fabricators and Machine Operators (Benders).

Estimating / Project Managers: Aaron Hughes: ahughes@albinaco.com Joe Daniels: jdaniels@albinaco.com Mark King: mking@albinaco.com Jason Orefice: jason@albinaco.com Operations Manager/QAM: KC Lesch: kl@albinaco.com Traffic Manager/Purchasing: Ben Ingersoll: bingersoll@albinaco.com

AUTOMOTIVE AGRICULTURAL ALTERNATIVE PARTS ENERGY PARTS

MARINE PARTS LOCOMOTIVE PARTS

AVIATION PARTS

VP of Sales: Brad Lund: blund@albinaco.com Sincerely, Brian Smith President Albina Co., Inc. Phone: 503-692-6010 Ext. 105 Fax: 503-692-6020 bsmith@albinaco.com https://www.albinaco.com

Continued Page 8 PAGE 10

AQUATIC PLAYGROUND HIGH PARTS EQUIPMENT PURITY CLICK HERE FOR COMPANY DIRECTORY! https:// www.albinaco.com/about/contact

(503) 692-6010 https://www.albinaco.com Located in Tualatin, Oregon A2Z MANUFACTURING WEST COAST •

7 • JUNE - JULY ‘20

BOB KROHA

ROB KROHA

CNC AND MANUAL MACHINERY SINCE 1979 New - Used -Appraisals - Auctions

Customer service remains our #1 priority. We remain dedicated to providing machine and parts sales along with service and preventive maintenance including but not limited to technology support, operator training and installation.

Our goal is to provide you with new and used equipment while keeping your existing metal cutting and fabrication machines running smoothly and efficiently.

We are proud to have HYDMECH as one of our preferred partners.

Over the past forty years, HYDMECH has become a worldwide leader in metal bandsaw and cold saw technology and metal sawing solutions. We are honored to have received the HYDMECH 2019 SILVER CERTIFIED DEALER award.

CONTACT US TODAY: 510-249-1000, PERMACH.COM

Our Showroom At: 3305 Edison Way, Fremont, CA 94538 Is Open Monday - Friday From 8am To 5pm Announcements Continued

Fahey Machinery Company Inc. Continues To Support Our Customers In Every Way Possible.

hoRizontal band Saw

ouR affoRdable, high quality SawS aRe unmatched in PRoviding the beSt coSt-PeR-cut on the maRket

Please contact us for all your machinery and parts and tooling needs. We look forward to hearing from you. Phone: 503.620.9031 Email: office@faheyinc.com

The H-320A is an automatic horizontal band saw designed for safety with saw-in-a-box style. A heavy duty shuttle vise powered by a ball screw and stepper motor provides material indexing up to 23” in a single stroke with multi-index capability. Its standard split front vise delivers a short material remnant length of 1.8” reducing material waste. The H-320A is a reliable choice for your horizontal metal cutting needs.

Reliable SawS. Reliable PeoPle.

hydmech.com

• 8 • JUNE - JULY ‘20

2020 is the year we were reminded of the importance of being able to adapt, keep positive thoughts, and remain flexible.

We collectively maintain a hopeful watch for signs of a quick safe return to a more normal daily life soon.

To create innovative solutions to meet daily challenges in our industry, Fahey Machinery Company remains open and our team of professionals are available.

h-320-a

A2Z MANUFACTURING WEST COAST

Our close working relationship with HYDMECH coupled with 58 years of industry experiences have cemented our commitment to finding a saw that will meet your company’s needs. Our knowledgeable sales team’s promise is to always provide the most applicable saw for your company at very competitive pricing.

SEA CHANGE Monday was World Ocean Day, and the Ocean Renewable Energy Action Coalition (OREAC) was thinking big: The group announced its “vision” of generating 1,400 gigawatts of offshore wind by 2050, seeking to drive down carbon emissions and generate employment, including a “green recovery from the COVID-19 crisis.”

Led by major players in the offshore wind industry, including GE Renewable Energy, OREAC was formed in 2019 in response to a call for ocean-based climate action.

It’s already got the wind at its back: The offshore industry has grown 30% over the last decade, with 30 GW of installed capacity around the world. There’s a way to go till 1,400 GW, of course, but — said Benj Sykes, a representative of the Danish offshore wind developer Ørsted — right now we’re seeing “just the tip of the iceberg for the massive growth potential of offshore wind.”

The power of wind: One of the ways Ørsted is contributing to the growth potential includes plans for two huge offshore wind farms off the U.S. East Coast.

With an installed capacity totaling 1,220 megawatts, they’ll rely on GE Renewable Energy’s Haliade-X 12 MW offshore wind turbine platform — the world’s most powerful offshore wind turbine, which is currently spinning through certification tests in the Port of Rotterdam. The machine’s rotor and 12-MW generator can capture and convert enough wind into electricity to supply 16,000 European homes, making it an attractive piece of technology not just in the U.S. but around the world; the Haliade-X has also been selected for the North Sea’s 3.6-GW Dogger Bank installation, which will be the world’s largest offshore wind project. In 2019, Time magazine named the Haliade-X as one of its best inventions of the year.

Learn more here about the development of the Haliade-X offshore wind turbine platform, and here about OREAC’s ambitious wind energy goals.

THE FATHER OF INVENTION Today, GE machines produce one-third of the world’s electricity; 90% of power transmission utilities worldwide use the company’s technology; and 40% of the world’s energy is managed by its software. But there’s more.

Edison’s light bulb also illuminated other breakthroughs. Avatars of the carbon filament Edison used in his early bulbs are being pressed into service as jet engine components. GE replaced the metal fan blades of its most

powerful jet engines with their carbonfiber composite counterpar ts for lighter and therefore more fuel-efficient aircraft. Engineers are exploring more applications for this wonder material: as the building blocks for record-breaking wind turbine blades, for instance, and for use in medical imaging machines. The X-ray machine, too, can trace its origin to Edison’s inventive genius: GE co-founder Elihu Thomson rejiggered the Edison light bulb to emit X-rays, leading to the dramatic ability to peek inside the human body — a revolution in healthcare.

A Z MANUFACTURING WEST COAST • 9 • JUNE - JULY ‘20 2

platform that allows for two large adults and stuff, or one large adult and a lot of stuff, and that is not much bigger than a motorcycle,” Frohnmayer said. “This is the patent that underpins all our products. As a smaller new vehicle entrant, having intellectual property protection is important. We don’t want a big player to come in and roll over us.”

Frohnmayer was reached by phone in Fortuna, California, as he returned to Oregon after delivering FUVs in Southern California, including one to an entertainment-industry celebrity who he declined to name.

After shutting down production completely in March — at about the time its stock had sunk to an all-time low $0.97 — Arcimoto returned to “low-volume production” in May. More than half its 108-person workforce is on the job, some in the Eugene factory, others at home working on plans to scale up production.

Frohnmayer said that more of the vehicles, outfitted for deliveries but also promoted for general utility use, have gone out for pilot testing.

Available TPI 1/2”

6

6/10

8/12

10/14

3/4”

4/6

5/8

6/10

1”

2/3

3/4

4/6

5/8

6/10

8/12

1-1/4”

2/3

3/4

4/6

5/8

6/10

8/12

1-1/2”

2/3

3/4

4/6

8/12

10/14

Call Today 877-738-6437 or Visit

10/14

www.DeWaltbandsawblades.com Arcimoto Snares Patent As Pandemic Revival Continues EV-maker Arcimoto has received a patent for its Fun Utility Ve h i c l e d e s i g n , boosting a stoc k price already on the rise since mid-March.

The patent for the Eugene company’s “narrow ultra efficient three-wheeled vehicle with automotive class feel,” as it’s officially described, is both validation and protection, founder and CEO Mark Frohnmayer said.

“It speaks to what separates us from other vehicles in the marketplace, our A2Z MANUFACTURING WEST COAST •

10 • JUNE - JULY ‘20

The company also announced that it would work with the Michigan firm Munro & Associates “to evaluate Arcimoto’s manufacturing processes and supply chain management in order to drive down costs and begin high-volume production of Arcimoto ultra-efficient electric vehicles.”

Munro & Associates is headed up by Sandy Munro, who has been in the news recently for his reverse engineering of Tesla vehicles, including the new ModelY, shared recently in a series of YouTube videos.

“Often appearing on-camera in a face mask, Mr. Munro has become an EV folk hero during the pandemic, genially detailing the Y’s breakthroughs while reminding the ‘boys and girls’ watching to ‘tip those cashiers,’” the Wall Street Journal reported.

Munro’s unique style was evident in the quote he supplied for the press release announcing his company would work with Arcimoto: “OK, let’s start off with the fun part.This is a fun trike, no question about it! It is definitely not your grandpa’s electric three wheeler ... unless I am your grandpa. Munro is very excited to be part of this new adventure, this new way of traveling. We can hardly wait to get started. I look forward to doing everything I can to make this vehicle as profitable as possible.

Have a great day, and go buy one!”

By Pete Danko – Staff Reporter, Portland Business Journal

Tooling designed & manufactured specifically for your swiss-style CNC Machine

#1 IN SALES, SUPPORT, QUALITY, AND COMMITMENT TECHNOLOGY WITH COMMITMENT

www.SpinettiMachinery.com 775 - 996 - 3770 A2Z MANUFACTURING WEST COAST •

11 • JUNE - JULY ‘20

Your partner for innovative manufacturing

REVO®—the 5-axis revolution

Infinite positioning and synchronized 5-axis motion provide measurement access at unprecedented speed and accuracy. Our newest solution—the RFP fringe probe—expands our family of multi-

sensors further. It adds non-contact structured light inspection to our revolutionary 5-axis measuring system that already includes tactile scanning, touch-trigger, surface finish and vision probe solutions.

www.renishaw.com/revo Renishaw Inc West Dundee, IL

usa@renishaw.com

© 2020 Renishaw plc. All rights reserved.

CMM Revo Half Page Final.indd 1 Here Are Some Oregon Companies Making PPE

Looptworks usually makes bags and accessories from discarded material.

Since the pandemic started, it’s been churning out protective equipment.

The Portland-based company is one of several Oregon businesses that have retooled assembly lines to mass-produce masks and other protective gear.

At first, the companies focused on supplying hospitals and medical offices.

As the state’s economy reopens, they’re pivoting to serve businesses that need protective equipment for workers.

Other local companies making masks include Portland-based Spooltown, which is selling 10-packs of masks for $100, and Portland-based North St Bags, which is selling 50-packs for $200.The contract arm of Salem-based N.W. Alpine is accepting large orders.

Spooltown owners Dana Hinger and Sara Tunstall said the company has hundreds of masks ready to ship.

“Being a factory, we focused on getting lots of locally made masks to local folks versus selling direct to consumers,” Tunstall said, in an email. “It just seemed to us that mask wearing was around to stay and really ... people need to start thinking of them like socks. Once you’re out and about in the world again, you need more than one — you actually need quite a lot of them per person.”

A2Z MANUFACTURING WEST COAST •

12 • JUNE - JULY ‘20

2:04:17 PM Portland Garment Factory, one of the first companies to4/6/2020 start marking PPE for hospital workers, is selling 24-packs of masks for $223, reversible masks for $15 and scarf-like masks for $34. The factory’s 24-packs include the option of adding company logos.

Founder and CEO Britt Howard said Portland Garment Factory made 30,000 medical masks before shifting to masks appropriate for an office.

She’s offering discounts on mask purchases to B-corps and businesses owned by people of color.

“Demand is robust since so many doctors/leaders/smart people have told the greater public that a mask is a necessity,” Howard said in an email.

Like others, Portland Garment Factory also is donating masks.

The website of Business Oregon, the state’s economic development arm, has a complete list of Oregon companies making protective equipment.

Spooltown’s Tunstall said she hopes the pandemic has reminded people about the importance of local supply chains and manufacturing jobs.

“Having those close relationships with manufacturers and maintaining them even when we’re not in a global crisis is how we have access to folks that can pivot on a dime, prioritize local needs, and fill in when there’s a gap,” she said. “China isn’t going to give a damn about your business when there’s a global supply chain break, but we will.”

Looptworks founder and CEO Scott Hamlin said it wasn’t too difficult for his company to make masks. The company upcycles: It makes new products, such as pillows, from discarded material, such as old sports uniforms.

Boeing hasn’t made since the 2008 financial crisis.

The deals will support the U.S. government’s foreign military sales, the Chicago-based company said in a statement.

The company’s 16 sewers are largely remote. To make masks, it had to find material, then provide patterns to sewers. Looptworks was able to use surplus operating room material provided by hospitals. It found a local foundry to stamp out nose pieces made from recycled aluminum.

Boeing declined to identify the countries who are buying the missile weapons, which will be produced at its defense facilities in St. Charles, Missouri. But the deals are good news for the beleaguered jet maker, whose commercial aircraft business has sagged because of the pandemic.

The company has made more than 140,000 masks. Hamlin said he’s been careful to avoid being seen as a profiteer.

“We are pleased to continue our long legacy of partnering with the Navy to build weapons that defend America and its international partners,” Boeing Weapons vice president Cindy Gruensfelder said in a Boeing statement about the contract wins.

“We didn’t want to sound opportunistic,” he said. “This is just an extension of a product category for us. Our business is still the same. Our values are still the same.”

“These awards will not only extend production of the Harpoon program through 2026, they will also restart the production line for SLAM-ER and ensure deliveries through 2028,” Gruensfelder added.

Boeing Wins $3.1B Navy Deals, Some For Missiles It Hasn’t Made Since 2008 Recession

Boeing last delivered the SLAM-ER weapon system in 2008, the company said.

Boeing said it’s been awarded $3.1 billion worth of defense contracts to produce two different missile weapon systems for foreign government buyers.

In October 2019, however, Boeing started construction on a new 35,000 square-foot manufacturing facility to support increased production for the Harpoon and SLAM-ER programs.

The deals involves production of Harpoon and SLAM-ER, or Standoff Land Attack Missile Expanded Response systems, the latter being missiles

Construction is expected to be complete in 2021. By Andrew McIntosh – Puget Sound Business Journal A2Z MANUFACTURING WEST COAST •

13 • JUNE - JULY ‘20

Long Accredited To Nadcap For Plating....

And Now Announcing Nadcap Accreditation For Heat Treating

If your Copper, Copper alloys or Stainless Steel parts are very small, ultra precision and require Nadcap accredited plating, likely you consider Foresight Finishing to be an integral supplier to your business.The company, based in Tempe, Arizona for the past decade, specializes in plating connector contacts, RF components and loose piece contacts. Typical parts have tolerances as tight as +/- .0002. The finished parts pictured in the blue container to the right measure .1481” in length and .012” in diameter, and there are approximately 10,000 of these parts. Parts on the left are a result of Foresights pristine pre-clean and heat treat process.

Casey Weizel, co-founder with his brother Joe, says, “Our customers all across the United States have been utilizing our Nadcap accredited plating processes, but major OEMs are now starting to flow down Nadcap heat treat in the electronics industry. For the past few years, we’ve had a number of customers request that we add heat-treating to our list of competencies. 2 years ago, we brought heat treat in-house, and we perfected the process for the ultra small precision parts that are the cornerstone of our business.

The contacts and connectors Foresight plates are typically used in the Aerospace and Defense industries. As such, just like plating for these industries requires Nadcap accreditation, they would also require Nadcap for heat-treating.

Casey says, “We’ve been heat treating for the past couple of years, but only for customers who didn’t require Nadcap accreditation.That being said, it has always been part of our business plan to achieve Nadcap accreditation for heat treating.”

He added, “Our customers regularly tell us that standard heat treat companies who heat treat larger parts are not set up to handle ultra precision small parts.”

Casey and Joe enlisted the help of Rod Beverley to spearhead the company’s preparation for Nadcap accreditation for heat treat. Rod says, “6 months ago we began the difficult process of accreditation, and in June of this year, we were A2Z MANUFACTURING SW •

60 • July / Aug 2020 14 • JUNE - JULY ‘20

A2Z MANUFACTURING WEST COAST •

successfully Nadcap accredited for heat treating.”

Today, customers who machine very small parts that require both heat treat and plating, Nadcap accreditation, can simplify the number of companies in their supply chain and send their parts to Foresight Finishing.

Casey says, “A major challenge that is witnessed across the electronics industry is plating coverage on the insides of small heat-treated beryllium copper parts. One can have the best plating chemistry in the world, but heat treat scale and parts not cleaned properly prior to heat treat is often a major contributor to this issue.”

He adds, “Foresight Finishing has in process inspection that validates the cleaning of heat-treated components so we don’t go to plating with contaminated ID’s. However, this does not correct the problem — it only identifies it, until now. The combination of Foresight’s small parts plating line, pre-clean process and vacuum furnace provides our platers with a bright, pristine, oxide free surface that eliminates harsh cleaning cycles that can undersize and etch parts.

Foresight’s heat-treating process creates a surface that accepts the plating deposit willingly instead of hampering it.”

Joe says, “Before we opened our plating business in Arizona, both Casey and I had worked for many years plating in Minnesota, where we grew up.We learned much about the process, and we also knew that one of the key differentiators we could offer our customers over other platers was state of the art technology and processes. Foresight Finishing’s plating processes and equipment are best in class.The prep processing we’ve instituted prior to plating significantly reduces our turn around times.When we made the decision to add heat-treating to our business, we applied these same principles. Our built in cleaning processes help to ensure that the parts that we heat treat

About Vacuum Heat Treating Vacuum furnaces have massive advantages over traditional heat-treating methods. As a whole, vacuum fur naces are ideal for very high temperature p ro c e s s i n g, a n d they’re built to do this safely and efficiently.

are free of debris and oils. When we heat treat and plate a part, our prep and clean process can take 30 minutes. In comparison, if we plate a part that hasn’t been properly cleaned by an outside heat treater, the cleaning process can take hours or even days de-scaling the parts.”

Joe says, “We did research prior to investing in our heat treat oven. We wanted to ensure our oven would be the best fit for the type of parts we plate. In our analysis, we determined that we would purchase a vacuum heat treating oven, as we learned it could reduce cleaning cycle times by as much as 70%.”

Rod says, “We offer some of the most competitive heat treat prices and turnaround available in the market. Our heat treat and hardness testing lot charges are $275 for heat treat and $100 for hardness testing. In the market, our customers have told us that they paid $350 for heat treat and $150 for hardness testing.” He added, “We also hear from our customers that 2-3 weeks turnaround for their parts to be heat treated is the norm.

We are running 24x7, and with the best equipment, so we are able to offer 3-5 day turnaround for heat treating and plating.

Casey says, “Within our Quality Metrics, we are achieving 98.9% on-time delivery and 99.6% quality.” He adds, “When our customers bring us their parts for heat treat and plating, they will see many advantages over using two different suppliers, one for heat treat and one for plating. We can provide reduced variability in the process, we can control cleanliness throughout both processes, and we can reduce their turnaround times.

When you add this to extremely competitive pricing, I think we’ve got an outstanding solution for customers new and old.”

Prior to starting the Heat Treat division in their company, Joe and Casey solicited colleagues for recommendations on a hire. Casey says, “Mary Treiny came highly recommended, and we brought her on-board to get the heat treat division up and running.” He added, “Mary has done an outstanding job, and we are proud to say that through her efforts, we have the best heat treat facility for ultra precision parts around.” Rod adds,” When you add an oven to Nadcap accreditation, it doubles or even triples the accreditation process, it is just that difficult. I think our successful accreditation to Nadcap for heat treat is a testament to both Mary and the company owners’ drive for continuous improvement. I know our customers value what we have put in place to make their jobs just a little more simplified.”

If Foresight Finishing isn’t one of your suppliers, and you have plating and heat-treating requirement, visiting their new facility, purchased 3 years ago, should be a must. I am confident you will not see a special processing facility, with plating and heat-treating, that is as immaculate as you will encounter in this 14,000 sq. ft. state of the art business.

shiny, and ready for use.

Vacuum heat-treating creates an oxygenfree environment so your metals receive all the benefits of heat treatment, without any of the downsides of oxygen contamination. Parts come out clean,

Every metal has a different melting point and freezing point. Each desired heat treatment requires precise control over heating and cooling.Vacuum furnaces have incredibly precise controls, and very dynamic controls, so operators can easily control temperature to the finest degree.

Vacuum furnaces can quench without oil. No oil quenching means cleaner parts right out of the furnace.

Vacuum heat-treating creates higher quality products, both in function and appearance. This includes: • • • • • •

Reduced distortion Energy efficient Clean, shiny products Increased life cycle of parts Adds value to components through all of the above

•

AC7108 Rev D - Nadcap Audit Criteria for Chemical Processing (Bright Tin, Copper Plating, Electroless Nickel, Gold Plating, Nickel Plating, Silver) Testing Performed Internally In Support of the Chemical Process Accreditation: (Adhesion Testing, Conductivity Testing, Coating Thickness Measurement, Solderability and Porosity Testing, Solution Analysis) Nadcap Heat Treating

•

•

Accreditations

To learn more, contact Foresight Finishing at: (480) 921-0000 or visit their website at:WWW.FORESIGHTFINISHING.COM A2Z MANUFACTURING SW • A2Z MANUFACTURING WEST COAST

61 • July / Aug 2020 • 15 • JUNE - JULY ‘20

Amazon Moves To Boost Its Boeing Prime Air Fleet Amazon said it’s adding a dozen more Boeing jets to its fast-growing Prime Air operation, expanding its fleet of winged merchandise movers by 17% to help improve deliveries during the Covid-19 pandemic.

The Seattle-based company announced it is leasing 12 Boeing 767300 converted cargo aircraft from Air Transport Services Group (ATSG) of Wilmington, Ohio.

The new aircraft will join Amazon’s existing fleet of 70 767 widebody jets and smaller 737 freighters.

One of the 767s already joined Amazon’s air cargo operations in May, Amazon said, while the remaining 11 will be delivered in 2021.

The terms of the deal were not disclosed by either company.Amazon is a shareholder in ATSG. Amazon Global Air Vice President Sarah Rhoads said the fleet expansion will help her company improve rapid delivery of goods to its legions of customers during the pandemic.

“During a time when so many of our customers rely on us to get what they need without leaving their homes, expanding our dedicated air network ensures we have the capacity to deliver what our customers A2Z MANUFACTURING WEST COAST •

16 • JUNE - JULY ‘20

want: great selection, low prices and fast delivery,” Rhoads said in a statement.

“Amazon Air is critical to ensuring fast delivery for our customers – both in the current environment we are facing and beyond,” Rhoads added.

The deal is also a boon to Boeing Global Services, the jet maker’s unit that offers standalone parts and services for its older aircraft like the 767s that are still in service.

The availability of more retired 767 passenger airplanes appears to have facilitated the deal, and the Amazon deal appears to have been in the works for months.

Until the global collapse in aviation, companies competed aggressively to buy and convert retired 767 passenger jets to freighters. But with airlines parking dozens of such planes and or retiring them, so-called “feedstock” is more available to companies like ATSG. ATSG has agreements with Israel Aerospace Industries Ltd. to convert the Boeing 767 passenger aircraft into a standard configured freighter aircraft, ATSG has revealed in SEC filings.

Such conversions primarily consist of installing a standard cargo door and loading system on the airplanes after old passenger seats are ripped out.

In its annual 10K SEC filing, ATSG revealed in late March it had secured 12 767 aircraft that “were in or awaiting the modification process” and that it had placed $15 million in non-refundable deposits to buy 10 more Boeing 767-300 passenger aircraft through 2021.

PRECISION ACCURACY

| NTY3-150 • • • • •

Multi-Tasking Turning Center 2.5” Bar Capacity Y-Axis On All 3 Turrets 60° Slant Bed Increased Productivity with Simultaneous Machining • FANUC 31i-B w/Smart-X HMI

| PX30i • 5-Axis High Precision Vertical Machining Center • Large Work Envelope • High Torque Spindle • High Speed Direct Drive Rotary Axis • Self-Contained Multi Pallet Stacking System • 323 ATC Standard

Methods | Los Angeles 1980 West Corporate Way Anaheim, CA 92801 Phone: 714.521.2507

Methods | San Francisco 650 Whitney Street, San Leandro, CA 94577 Phone: 510.636.1430

• 17 • www.methodsmachine.com A2Z MANUFACTURING WEST COAST

JUNE - JULY ‘20

TVT DIE CASTING Precision aluminum and zinc die casting, machining and finishing.

Quality, Reliability and Service

We are a full service job shop, providing as much or as little project involvement as required – from tool and die design to finishing and assembly.

tvtdiecast.com

▼

800 280 2278

ISO 9001:2008 Certified

Ford, Volkswagen to Make Electric and Autonomous Vehicles Together

their relationship as competitors.

Ford Motor Co. and Volkswagen AG signed an agreement to cooperate on the development of new commercial vehicles.The pact was announced in July 2019 and formalized June 1.The cooperative effort does not include any exchanges of company ownership, and the two companies maintain

The partnership involves several projects, including a medium pickup truck which will be built by Ford and sold by Volkswagen, a Ford electric vehicle built on Volkswagen’s modular electric drive system to be sold in Europe, and new commercial vehicles for both companies.The commercial vehicles will include a 1-ton cargo van made by Ford and a city delivery van based on the Volkswagen Caddy.

Both companies will also work with Argo AI, a Pittsburgh-based autonomous driving company, to form their own autonomous-vehicle businesses. Ford already had ownership and development interests in the company, whichVolkswagen invested in last week.According to Ford,Argo AI’s self-driving system is the first such system with plans for deployment in both the U.S. and Europe.

A2Z MANUFACTURING WEST COAST •

18 • JUNE - JULY ‘20

“This alliance comes at a time of tremendous enthusiasm about the intersection of increasingly intelligent, connected vehicles in an eversmarter world,” said Jim Hackett, CEO of Ford. Volkswagen Group CEO Dr. Herbert Diess said the companies’ joint effort would allow both to cheaply develop and distribute electric and commercial vehicles. “This collaboration will efficiently drive down development costs, allowing broader global distribution of electric and commercial vehicles, and enhance the positions of both companies,” said Diess.

Both companies have their eye on saving costs and carbon emissions. “In light of the COVID-19 pandemic and its impact on the global economy, more than ever it is vital to set up resilient alliances between strong companies,” said Diess. Hackett noted the partnership was a great opportunity to innovate, “even as companies need to be selective about how they use their cash.”

As for carbon, Ford says its use of Volkswagen’s electric drive system will help it fulfill its commitment to the Paris 2015 agreement, and Volkswagen and Ford reportedly plan to “explore additional ways to cooperate on electric vehicles.” Ford plans to design and engineer the vehicle in Germany, specifically Cologne-Merkenich. Independently, Volkswagen plans on officially releasing its own electric 1D.3 vehicle next week for about $45,484 in U.S. dollars as it prepares for a substantial push into electric vehicles.

Source: IndustryWeek

IMTS booth South Hall 338381

California call Scott McIntire 909-992-8536 • Arizona call Ron Vogel office 480-836-1782/ Cell 630-235-1827 In our 29th year of exclusive EDM Sales and support • We offer Everything in EDMTMSW • 39 • Jan / Feb 2020 A Z MANUFACTURING 2

BIGGER. BETTER. BOLDER. Your One-Stop Shop for Metal Finishing Services PAS Technologies, a StandardAero Company, offers a comprehensive

OEM APPROVALS (list non-exhaustive)

portfolio of services for component processing in metal finishing, including: Nondestructive testing, shot / flap peening, grinding, special processing and paint.

Chemical Processing

• Anodize Type I, II, III • Black Oxide • Brush Cadmium • Brush Nickel • Cadmium Plating • Chemfilm/Alodine • Chrome Plating • Copper Plating • Dry Film Lube • Electroless Nickel • LHE - Low Hydrogen Embrittlement • Manganese/Zinc Phosphate Plating • Olive Drab • Passivation • Prime/Painting • Silver Plating • Sulfamate Nickel • Thin Dense Chrome Plating • Zinc Nickel

Metal Finishing & Enhancements • Flap Peen • Glass Bead • Shot Peen Grinding • Centerless Grinding • CNC Grinding • Jig Grinding • Surface and Low Stress Grinding Non-Destructive Testing Services • Fluorescent Penetrant Inspection • Magnetic Particle Inspection • Nital Etch

Certifications & Approvals • AS9100D, AS9110C w/ ISO9001:2015 • DDTC Registered • FAA / EASA Certified • NADCAP Accredited - Chemical Processing - Conventional Machining Surface / Low Stress Grinding - Non Destructive Testing - Surface Enhancement Shot Peen / Flap Peen • ROHS Compliant

CONTACT US TODAY TO LEARN MORE pnx_custsvc@standardaero.com pnx_quotes@standardaero.com 1021 N. 22nd Ave, Phoenix, AZ 85009 +1.602.744.2600 www.standardaero.com/phoenix

Despite Challenging Conditions Most Keeping “It’s somewhat logical and intuitive.Where our lives are disrupted and Manufacturers we need to do more and more things from our home, we need to ensure we have the technology Doors Open at our disposal so things can go on as normal as possible,” Chief Executive Officer Bob said Thursday in anwith interview withmany Bloomberg “What hasthe current pandemic with the As anSwan industry that has dealt adversity times, Television. manufacturers arethat facing meantdetermination. is demand forAmore more devices, including PCs, for parents to continue same newand study, Manufacturers’ Outlook Survey, released on May 28 reviewing the second quarter to 2020, conduct theirthat work and for kids to drop continue their education.” of found despite a historic in optimism, to nearly 34%, and challenging business conditions, the vast majority of manufacturers (98.7%) have continued or only temporarily halted operations.

Swan’s company dominates the markets for processors that run PCs and the server The surveythat alsoact shows thatbackbone manufacturers are innovating to find to centers. keep businesses running and to protect machines as the of corporate networks andsolutions cloud-data workers Demandand for communities: more expensive server chips is also higher as companies and service providers improve the systems needed to connect work PCs in people’s homes.

– 22% retooling to produce personal protective equipment –Companies 67% reengineering processes to including reflect COVID-19 safety protocols around the world -Intel -- have sent employees home in - compliance 12% completely reevaluatingorders the mission firm. the spread of the Covid-19 with government aimedof at the containing pandemic. That shift has provoked a rush to invest in the infrastructure that keeps “Manufacturers led theAnalysts country and through the COVID-19 response, America people workinghave remotely. investors are now looking for and signals on is counting on our industry to lead our recovery and renewal,” said NAM CEO Jay Timmons.

“While these show that we’ve faced whether that’s a short-term lift that will subside as lower economic activity takes numbers a difficult circumstances and that there is a challenging road ahead, manufacturers have proven that with our grit, toll on corporate and consumer spending, or whether it is a lasting trend. determination and patriotic spirit, we can overcome any challenge facing the nation.”

Intel is scheduledand to report first-quarter earningsto onhelp Aprilthe 23economy and is expected give this pandemic, the NAM urges As policymakers regulators debate solutions recovertofrom projections for the current period.

In January, before the virus had spread around them to focus on the renewal agenda laid out in the American Renewal Action Plan. the world, the company forecast about $19 billion in revenue for the March quarter.

Some of the key provisions include the following: The chipmaker was partly prepared for a surge in demand because it was already Congressional andquarter administrative actions to allowupmanufacturers to components, further ramp up production and enhance expecting a strong and had facilities geared to produce more distribution of personal protective equipment tocompany support isnotnow onlyworking our hospitals but all sectors of the economy.

Swan said. The Santa Clara, California-based hard to convince governments that its operations are essential and should be exempt from Congressional andBy administrative closures, he said.

Ian King actions to ensure that employees are able to go into work confident that proper A2Z MANUFACTURING WEST COAST •

20 • JUNE - JULY ‘20

health precautions are being implemented.

Strong and clear legal reforms that protect the essential manufacturers that must remain open to provide vital goods and those that retool their factories to make urgently needed equipment and supplies.

Significant investment in workforce training programs to aid dislocated workers.

Historic investment in our nation’s infrastructure to boost the economy.

Key reforms to boost economic and national security by growing the U.S. manufacturing industry.

Congressional and administrative a c t i o n s t o e x p a n d U. S . exports and strengthen the manufacturing supply chain.

TheTreasury Department, Small Business Administration and

A2Z MANUFACTURING SW •

25 • May / June

2020

Federal Reserve should speed the delivery of aid to small businesses by addressing key issues related to their new lending facilities. ”We have been encouraged by actions taken thus far, but there is still greater need for targeted liability reform, tax provisions to ensure investment in manufacturing and measures to reaffirm the U.S. supply chain to protect those businesses that continue to work on the front lines of the COVID-19 response to ensure as swift a recovery as possible,” said Timmons.

SOURCE: IndustryWeek

Eviation Alice Development Takes Step GKN Aerospace and Eviation have signed a deal to collaborate on the wings, empennage and electrical wiring systems of the Eviation Alice, a regional electric airplane.

GKN Aerospace, which operates facilities in the Puget Sound region, said its agreement with Eviation covers the design and manufacture of Alice wings, its tail assembly and the Alice’s electrical wiring interconnection systems (EWIS).

“The development of all-electric aircraft is ground-breaking. It’s a step change in aviation and we are delighted to contribute ... expertise to the project,” GKN Aerospace President, Civil Airframes, John Pritchard said.

The deal is also notable in the Puget Sound region because the Eviation Alice is powered by Magnix, an electric airplane motor maker based in Redmond.

The first Eviation Alice prototype was introduced to the world at the 2019 Paris Air Show. Eviation is part of the Clermont Group, a conglomerate owned by billionaire Richard Chandler, and the Israelbased startup is aiming to make flights up to 650 miles more environmentally

sustainable and cheaper. Eviation and Magnix are both part of Clermont Group.

In a letter obtained by the Business Journal last year, Chandler explained his passion for electric aviation.

Eviation’s deal with GKN Aerospace comes just a week before Magnix conducts its first flight tests of new motors, which are installed on an Cessna Caravan, at the Moses Lake flight test and engineering facilities of Seattle-based AeroTec. MagniX CEO Roei Ganzarski stands next to an airplane propellor mounted electric motor that his company is innovating as seen in a R&D lab at his growing company’s headquarters in Redmond, Washington.

The all-electric nine-passenger Cessna has been renamed “eCaravan.” It will powered by a 750-horsepower (560 kW) magni500 propulsion system, which Magnix says will make it the world’s largest all-electric aircraft after its first inaugural flight.

Magnix has already loaded one of its electric motors onto a modified Harbour Air seaplane for test flights in Canada last December as aviation enthusiasts lined the docks in Vancouver to watch. By Andrew McIntosh – StaffWriter, Puget Sound Business Journal A2Z MANUFACTURING WEST COAST •

21 • JUNE - JULY ‘20

METALS

SHAPES

SERVICES

Aluminum Steel Stainless Brass Copper Ornamental

Sheet/Plate Production Cutting Shim/Bar Tube/Pipe Precision Channel Sawing Angle Shearing Beam Perf./Expand.

818-729-3333, www.IMSmetals.

TURN TO THE LEADER IN SPINDLE PRECISION SALES • SERVICE • SUPPORT

Check Out Our New State-of-the-Art Facility!

So-Cal’s Source For All Your

Metal Needs Next Day Delivery - No Minimum - Open Saturdays

STOP BY TODAY! Los Angeles | Orange County | San Diego | Inland Empire

Returning to Work?

Within the next three months, the majority (78%) of non-essential businesses say they are ready to return to their physical locations, while 34% plan to return within one month.

Other employers are moving more slowly. Only 18% plan to bring employees back immediately after stay-at-home orders expire.Another 33% will wait a few weeks and 42% plan to take a “wait and see” approach to gauge the outcome of other businesses’ reopening efforts.

These are the findings of a study, COVID-19 Return to Work Survey Report, released by Littler, an employment law practice.

“While many businesses and their employees are eager to return to a sense of normalcy and resume in-office operations, they face a host of unknowns when it comes to what the workplace looks like in a COVID-19 era,” said Alka Ramchandani-Raj, a leader of Littler’s COVID-19 Task Force. “Particularly given the wide-ranging, and often conflicting, guidelines from state and local officials, employers are left to balance multiple logistical, emotional and legal concerns in determining whether, when and how to reopen their workplaces.”

Employer Liability Concerns As the debate over granting employers “liability shields” to protect A2Z MANUFACTURING WEST COAST •

22 • JUNE - JULY ‘20

• 800-686-1679 • info@gmnusa • www.gmnusa.com against COVID-19 lawsuits rages on in Congress, 71% of in-house counsel respondents report being at least somewhat concerned about potential lawsuits upon reopening. Only 6% say that they are not concerned at all.

As for the bevy of claims and lawsuits employers could face, respondents ranked leaves of absence entitlements (68%), unsafe working conditions (59%) and workers’ compensation (43%) as the top three areas in which they expect to see an uptick.

Safety Efforts As far as ensuring the safety of employees, employers are taking numerous steps, including: increased cleaning (90%), limiting employee contact in common areas (87%), providing and/or encouraging the use of face coverings or other protective gear (86%), modifying workspaces to maintain safe distances (78%).

More than half (58%) of respondents also plan to conduct testing or health screenings on employees, with most referring to temperature checks (89%) and symptom screenings (72%) and a small number selecting antibody (8%) and antigen (7%) tests.

Yet while the U.S. Equal Employment Opportunity Commission has released some guidance about screening employees for COVID-19, uncertainty remains around implementation, privacy matters and litigation risks.

‘Buy America’ Package Introducing BySmart Fiber with 10kW Fiber Laser Power Building the next generation BySmart Fiber at the new Bystronic USA Headquarters for the Americas is now a reality. By investing in the North American marketplace, the new Bystronic assembly line has created, and will continue to create, new U.S. jobs both within Bystronic, as well as with our sub-contractors across America.

The NEW Bystronic 10kW BySmart Fiber 3015 delivers outstanding value and unprecedented cutting speeds.

The ‘Buy America’ package includes: • • • • •

High performance BySmart Fiber 3015 with automatic shuttle table Powerful Bystronic ByVision Cutting control interface Bystronic’s proven SSC Cutting Head technology Maximum flexibility with Fiber laser powers from 2kW to 10kW High speed ByTrans Extended 3015 material handling automation

Next Generation BySmart Fiber Proudly Assembled in the USA

Special ‘Preparing for the Upturn’ financing program includes ZERO down payment.

Call Landmark Solutions, Bystronic’s Exclusive West Coast Distributor, for all the details on this and other exclusive offerings!

Landmark Solutions | Irvine CA | 714-393-3783 | landmarksolutionscorp.com

A2Z MANUFACTURING WEST COAST •

23 • JUNE - JULY ‘20

ROCTEC® Abrasive Waterjet Nozzles Kennametal ROCTEC composite carbide waterjet nozzles are preferred by manufacturers and operators around the world for their superior wear resistance and quality performance.

ROCTEC APX Extends life as much as 20% over industry-leader ROCTEC 500

ROCTEC 500

Trusted for consistent long-duration precision cutting

ROCTEC 100

Workhorse for everyday cutting ROCTEC has been the industry leading technology for over 30 years. Made in the USA and distributed

by BARTON International.

Don’t settle for less.

800-741-7756 store.barton.com/roctec

BARTON is a trademark of BARTON Mines Corporation.

KENNAMETAL and ROCTEC are trademarks of Kennametal Inc.

OIL MIST AND SMOKE IN YOUR SHOP? Low-Cost, Highly Efficient Mist and Smoke Collectors Designed Specifically for the Metalworking Industry www.mistcollectors.com 1-800-645-4174

Reshoring Manufacturing Is Key For Economy And National Security, Experts Say Encouraging corporations to bring manufacturing out of China and back to the United States could be a key component to reviving the coronavirusstricken economy, economists tell the Herald, as they laid out their visions for the recovery.

The return of manufacturing to the U.S. would be an economic boon and also a vital national security interest to help combat future pandemics and public health crises, economists said.

“Out of this b l a c k sw a n event, I do think the good news is it will really b r ing more manufacturing back to America and get people back to work,” said Professor Nada Sanders of Northeastern University’s D’Amore-McKim School of Business.

Low-interest loans and tax incentives from the federal government would encourage companies to bring jobs back to the U.S. from China, Sanders said.

China is now under growing international pressure, suspected of failing to act swiftly or truthfully to stop the virus that emerged inWuhan late last year.

Beyond the federal government helping revive businesses, companies on their own will have to rethink their supply chains because of the protracted nature of this pandemic, she said. The global supply chain will look much different, she said.

“This has exposed the vulnerabilities of concentrating supplies in one region,” Sanders said. “Businesses will not be exclusively relying on their eggs in one basket, and instead diversify and begin to do manufacturing back here in the U.S.” President Trump’s trade adviser Peter Navarro has stressed reshoring — bringing manufacturing jobs that had been off-shored back to the U.S. — in the medical industry, noted Scott Harold of the RAND Corp.

“There will be a big impetus for the U.S. to pursue a decoupling from China, be less reliant on China, and bring back jobs here especially in the medical industry,” he said.

A2Z MANUFACTURING WEST COAST •

24 • JUNE - JULY ‘20

Before the pandemic derailed the economy, Trump was credited with spurring an era of growth with regulatory rollback and other pro-business measures. Adding national security and American jobs to the equation amidst a global pandemic, Trump said Sunday, “We’ve learned a lot about supply chains. We’ve learned that it’s nice to make things in the U.S. I’ve been saying that for a long time.

THE NEW MITSUBISHI EDM...

BURNING CIRCLES AROUND THE COMPETITION.

NEW M800 CONTROL

- CYLINDRICAL DRIVE TECHNOLOGY - 19” TOUCHSCREEN CONTROL - FIBER OPTIC SERVO CONTROL

REMOTE MONITORING

- INDUSTRY LEADING AUTO-THREADING

TRADE-IN PROGRAM

“One of the reasons I ran for office was because we started making things everywhere but here,” the president said. “If one thing comes out of this, more than anything else, is that we should make product in the United States.”

More politicians will call for certain products, notably medical supplies, to be made in the U.S. because supply chains have been unreliable, said Gary Hufbauer of the Washington, D.C.-based Peterson Institute for International Economics.

The limitation, however, is the labor supply in the U.S., he said. People who are now unemployed would have to go through extensive training programs for the highly skilled manufacturing work, he said.

“Maybe the government can incentivize firms to do more on-the-job training,” Hufbauer said.

The federal government can also incentivize businesses to reshore manufacturing jobs by creating tax breaks that are tied to investment in the U.S., said American Enterprise Institute’s Derek Scissors.

U. S . R e p.

Lori Trahan is pushing the Pandemic Production Act, which w o u l d require the federal government to buy U.S.made personal protective equipment and essential medical equipment.

“I think we would do ourselves a huge favor by directly investing in manufacturing to expand the production of PPE and medical technology, and at the same time investing in manufacturing jobs,” the Lowell Democrat said. “So this is an opportunity for us to make sure we’re prepared for future pandemics, and it would be an unbelievable source of jobs to bring back to the U.S. to help stimulate the economy.”

SOURCE: Boston Herald; By: Rick Sobey A2Z MANUFACTURING WEST COAST •

25 • JUNE - JULY ‘20

Are you ready to implement or upgrade your Quality Management System to the new ISO 9001:2015 or AS9100D / ISO 9001:2015 Standard, AS9110C or AS9120B? Special Packages available, take advantage of 20 plus years’ experience implementing and auditing quality management systems for commercial and aerospace companies!

Bretta Kelly, President and Owner of BMSC, LLC www.businessmsc.com has proven, copy written templates for ISO 9001:2015, AS9100D / ISO 9001:2015, AS9110C / ISO 9001:2015 and AS9120B / ISO 9001:2015 Standards with more than 30 companies upgraded and certified with zero to one finding results to date in their upgrade audits!

Packages Available: Complete Electronic QMS System/Templates and 4 hours consulting – Manual, Policy, System Procedures, Work Instruction / Flow charts for some processes, internal audit program, management review program (including forms), competency / training program, objectives training template, risk training and how to document a corrective action training PowerPoint’s - $3,500

Complete Electronic QMS System/Templates and online webinar of how to complete – Manual, Policy, System Procedures, Work Instruction / Flow charts for some processes, internal audit program, management review program (including forms), competency / training program, objectives training template, risk training and how to document a corrective action training PowerPoint’s - $2,500

Do you need Quality Management System Software? Bretta Kelly is also President of CIS WWSG, LLC and is now offering the $3,500 Templates for FREE with purchase of CIS Software! www.cissoftware.com. CIS Software costs $5,000 upfront (one time) and $385/month license and server fees for UNLIMITED users, request a demo today!

Testimonial from BMSC Clients featured in the A2Z Manufacturing Magazine who have taken advantage of the BMSC Templates for successful upgrades: Bretta, I wanted to email you and let you know that because of the help of yourself and Debbie we completed our audit to the new revision with no findings! :) We very much appreciate all of the help that you both did for us and will recommend your company to anyone looking to get certified. Your system really makes it easy for companies like ours to stay organized and compliant to the guidelines. Kristie McKee, Gibbs Precision Machine

:2015

Manufacturers to Spend $19.8 Billion on Data Analytics by 2026

analytics in their roles, the report states

Data management and data analytics continue to become an essential part of how manufacturers conduct business. In fact, this market will reach $19.8 billion in sales by 2026, according to ABI Research.

“While manufacturers have spent decades refining their physical production lines, today they need to expend effort in optimizing their processes for collecting and analyzing data,” Larner concludes. But data should not be collected just for the sake of it. SOURCE: IW Staff

“For many manufacturers, there is an appreciation that operational decisions need to be based on empirical evidence rather than guesswork,” explains Michael Larner, Principal Analyst at ABI Research.

Keeping Robots in Perspective

“The challenges are not necessarily capturing and analyzing data, rather what to analyze in the first place,” added Larner. “The findings need to have a meaningful impact on operations and so manufacturers need to take a step back and devise precise objectives.”

The report recommends that manufacturers” engage suppliers to help them prioritize activities and shape projects.” The report cites examples of using data analytics to increase production, improve quality, or reduce waste.

Analyzing data has become more sophisticated with newer technologies such as artificial intelligence (AI) and machine learning.The report points out that suppliers’ are now able to not just report data but also predict outcomes and make recommended actions.

Other developments in the arena, such as the advent of no-code/low code platforms allow staff not to have to be data scientists to utilize A2Z MANUFACTURING WEST COAST •

26 • JUNE - JULY ‘20

Even in an environment where remote work is normalizing and investments in robotics are paying rewards, robots are still not taking over the production environment. In many of the best use cases robots remain complementary – to humans as well as other technologies.

The human element is critical to making AI and robots work, explains Daniel Theobald, CEO of Vecna Robotics. “As counterintuitive as it sounds, human workers are essential to all manufacturing processes that include autonomous systems. In a facility that employs AI, robots and workers, each plays a unique role,” he says.

AI is constantly scanning, looking for and learning from opportunities to create greater operational efficiencies, and communicating with workers through wearables and robots to deploy them to solve problems in realtime. Robots are used for automating routine, repetitive, dangerous jobs, such as lineside replenishment, racking, and staging. Supported by AI and automation, humans can then turn their attention to higher-value

Precision Micro Aluminum Extrusions AS 9100 & ISO 9001 CERTIFIED

Well-designed extrusions can cut machining costs by 60%.

We can help!

Contact us for a quote today.

Thin, difficult hollow & multi-void hollow shapes Tolerances +/- .001 5" maximum circle size 25 lb minimum order qty Shapes as light as .015 lb/ft CNC machining & fabrication Hard alloys- 2024 & 7075 Soft alloys- 6061 & 6063 Engineering & design assistance

Family-owned and operated since 1983.

4730 Eucalyptus Ave. Chino, CA 91710

909-947-3455 www.superiormetalshapes.net svargas@smshapes.net activities, like exception handling and creative problem-solving.

“We have seen this allocation of tasks between our pivotal orchestration engine, autonomous mobile robots and workers in a production environment result in high employee satisfaction and engagement,” says Theobald. Daniel Theobald, CEO of Vecna Robots Ongoing evolution Early adopters of automation have validated the functionality of autonomous mobile robots (AMRs). According to Theobald, the next clear step is pushing interoperability forward. “This is interoperability between AMRs and warehouse management systems, enterprise resource planning systems and manufacturing execution systems; AMRs and humans; and, most importantly, between AMRS of different makes and models,” he says. “There is no one-size-fits-all robot. The typical industrial facility will require many types of robots to handle many types of applications.To effectively orchestrate tasks, interoperability amongst platforms is imperative.”

However,Theobald explains, sometimes the hardest part is getting started.

“Manufacturers can get over the hump by starting small and then scaling

their use of AI and automation,” he says.

The first route is to begin collecting information using real-time location services (RTLS) to gather data across all robots, workers, assets, pallets and manual equipment. “Our customers can collect data, including resource usage, distance traveled, travel time vs. idle time, deadheading, and high-traffic routes through a facility,” he says. “This data is a lowcost way to identify areas for improvement and can be used as a way to simulate and assess multiple scenarios to determine optimal resource utilization and automation mix. Understanding what’s really going on in your operation is the key to unlocking significant value.”

Future vision: Take ultrasound, more commonly associated with imaging fetuses in utero. COVID-fighting physicians have turned to ultrasound, though, to get a quick look at the lungs of infected patients and assess the extent of infection with the help of AI, whose algorithms can detect subtle patterns in the grayscale images.

AI is helping on the level of the individual patient, but can also be a good systems manager: Some 64 Oregon hospitals — representing about 90% of the state’s beds — have begun coordinating with the Oregon Capacity System, based on GE Healthcare’s Critical Resource Tile, which uses AI to help maximize life-saving resources such as intensive care units and ventilators. “It’s easy for clinicians to instantly see where the hot spots and excess capacity are across the whole network,” said Jeff Terry, chief executive of GE Healthcare’s clinical command centers.

A2Z MANUFACTURING WEST COAST •

27 • JUNE - JULY ‘20

MANUFACTURING / DISTRIBUTION BUILDING 4275 NW PACIFIC RIM BOULEVARD CAMAS, WA 98607

14.53 ACRE SITE 204,800 TOTAL SQUARE FEET 35,000 SQUARE FEET OF STACKED OFFICE 2,500 AMPS OF POWER AIR COMPRESSORS AND AIR EXHAUST SYSTEM

Partnerships Forged in Crisis The COVID-19 pandemic has resulted in the fastest contraction on record for factory activity, while the country’s Purchasing Managers’ Index (PMI) fell to a record low as well. Global supply chains for medical devices, already strained from Hurricane Maria in 2017, have been further disrupted. American industry has been conscripted to build personal protective equipment (PPE), coronavirus test kits, life-saving ventilators and other critical medical devices. Ford, GM, Tesla and other large-scale manufacturers across the spectrum have stepped up and contributed to the national effort.

It’s true that the FDA has lowered the regulatory bar during this emergency.

The pandemic has required it to become more agile and evaluate risk differently—giving emergency use authorizations to products so they can be brought to market in days, not months. This has been one of the most notable things we’ve witnessed throughout the pandemic: As numerous companies and individuals have stepped up to help with the medical supply shortage, the FDA has been a partner in arming our healthcare professionals with the supplies they need to fight COVID-19.

But products still have to undergo rigorous compliance testing before they are shipped to the front lines. It’s a public safety issue. As large-scale manufacturers in other markets step up to build much needed medical devices, they need to keep these regulatory issues in mind—even as they are under pressure to design, build and ship products as quickly as possible.

To do that, they are partnering. Tesla may not have the specific expertise A2Z MANUFACTURING WEST COAST •

28 • JUNE - JULY ‘20

LOCATED IN BEAUTIFUL CAMAS, WA AT THE EDGE OF PORTLAND, OR

CONTACT MARK CHILDS, SIOR MARKC@CAPACITYCOMMERCIAL.COM 503.542.4350

to navigate the medical device regulatory landscape, but Medtronic certainly does. These two companies have pooled their resources and expertise to build much-needed ventilators.Tesla is providing the additional manufacturing capacity, while Medtronic brings decades of medical device expertise to the table.A third partner acts as a supplier and provides backup capacity when needed.

Experienced medical device manufacturers can provide product design, material selection and material tracking as they relate to FDA compliance.

These companies can provide risk mitigation expertise to make sure the device does what is intended and key parts don’t wear down or impact functionality—such as a rough edge puncturing a plasma bag. They can also help choose materials that have already passed medical approval to make sure parts or devices don’t cause allergies and can be sterilized properly. Traceability—where the material came from, who mined or made it and on what day—can also be managed by experienced medical device manufacturers for auditing purposes.

As the third member of the partnership, suppliers are needed for prototyping, testing and backup manufacturing capacity.These companies can provide advice about how a design affects the manufacturing process.

For example, perhaps a design is too complicated or costly to scale appropriately. An assembler would have the knowledge to make that call.

Suppliers can also provide expertise on materials and manufacturing processes such as whether 3D printing or injection molding would be appropriate.

Supply chains have been disrupted before, and there’s no reason to believe further disruptions aren’t ahead. As the medical industry learned from

Hurricane Maria, secondary manufacturing locations are imperative throughout the production lifecycle to mitigate risk for products. Many medical device companies, for instance, made this secondary support a priority for future product development by identifying secondary manufacturing sources for line-down emergencies, or even when they were in need of a bridge-tooling resource. It is critical we continue to build and reinforce our supply chains with the learnings and partnership from these last few months, as industry ramps up in the aftermath of COVID-19.

We’re in an unprecedented chapter in our nation’s history, and manufacturers off all sizes are stepping up to help fill a need for critical medical supplies and devices. In order to meet regulatory standards, partnerships between manufacturers, experienced medical device manufacturers and suppliers should be formed—each providing a vital service and function vital to building medical supplies at the scale needed to defeat COVID-19.

Disruption is inevitable, but will we learn and adapt during the journey?

Chris Stevens is a senior research and development engineer at Protolabs.

Redmond Company Powers Cessna Caravan In Electric Aviation Milestone An electric motor made by Redmond-based Magnix powered itself into the electric aviation history booksThursday as the company’s all-electric Cessna Caravan took off into the skies above Moses Lake in another world first.

The Magnix 750-horsepower all-electric propulsion system, called the magni500, powered a specially-modified Cessna 208B Grand Caravan test airplane during a 30-minute first flight that appeared to go off without problems.

Precious Metals Plating Co., Inc + Gold Plating + Silver Plating + Nickel Plating + Electroless Nickel Plating + Tin Plating + Heat Treat With Plate + Nadcap Approved Processes + Boeing Approved Processes + Expedited Turnaround + X-ray Fluorescence Thickness Verification + In-House Laboratory With Atomic Absorption (AA) + Expanded Capacity In Vibratory Plating We Are The Noble Partner With The Personal Touch!

(800) 481-6271 www.pmplating.com

Magnix CEO Roei Ganzarski narrated the first flight during a live webcast that saw the electric airplane climb to 2,500 feet above Grant County International Airport at Moses Lake in central Washington, make several turns before returning to the airport for a safe final approach and landing.

Ganzarski remarked on how quiet the electric-powered airplane during its take off and test flight compared to the smaller, gas-powered chase plane that was also monitoring and recording the event.

“The small Cessna (chase plane) is now making double the noise that the Caravan is,” Ganzarski said.

After the flight ended, Ganzarski and Lee Human, the CEO of Seattle-based AeroTec, which provides consulting engineering and airplane certification services, celebrated with a high fives.

The two CEOs contend that the flight was the largest ever completed electric airplane flight.

Human’s team is working with Magnix on the eCaravan program at its facilities at Moses lake.

The difference in noise emitted by the two aircraft were especially noticeable as the eCaravan approached for its landing.

Last December, a smaller Magnix electric motor powered a Harbour Air passenger seaplane in Vancouver on its own inaugural flight, piloted by the CEO of Harbour Air himself.

By Andrew McIntosh – StaffWriter, Puget Sound Business Journal A2Z MANUFACTURING WEST COAST •

29 • JUNE - JULY ‘20

The Manufacturer’s Secret Weapon Attitudes That Matter

Positivity is the predominant attitude as Flatline continues to develop these humanitarian products. They are paring margins as low as possible to enable your restart to be as painless as possible.

A brochure with photos, renderings and pricing is in process at the time of this writing and will be available as this publication reaches your desk.

By Stephen Hannemann

Several months ago I began a series of articles on continuous improvement. This series is not about process improvement, but about attitude and how uplifting attitudes will positively affect every aspect of a manufacturing operation. A positive attitude in any organization is best when mentored from ownership or leadership, and can be equally powerful when it trickles up from the workforce.

Given the situation in our country in Q1 and Q2, first with COVID-19 and now the civil unrest that has befallen our country, a positive and encouraging attitude is a precious commodity.An optimistic attitude in your workforce these days can make the difference of whether your company will survive or not.

Last week I returned to the road and visited one of my principals, Flatline Fab in Portland, OR. A palpable atmosphere of positive enthusiasm enveloped me from the moment I entered the reception area. Flatline is one of the fortunate manufacturing companies having been allowed to remain open during the quarantine. Recognizing how other companies are less fortunate, the owners Free Standing and their managers took on a posture of Sanitatizing Station gratitude. To that end, Flatline, a nimble company, reconfigured their manufacturing floor to accommodate the production of a suite of safety products to aid businesses of all sizes and genres to open safely as sheltering abates.

Here is an abbreviated list of their offering: • Sneeze Guards – 24”x24.5”or 48”x24” • Sanitizing Station – wall mounted • Sanitizing Station – counter top or with stand • Touch Free Sanitizing Station – free standing • Touch Free Sanitizing Station – wall mounted • Foot Door Opener • Hands Free Door Opener A2Z MANUFACTURING WEST COAST •

30 • JUNE - JULY ‘20

Sanitizing Stand with Trash Holder

To order or for more information regarding these timely products, call Flatline Fabrication, 4322 NW Yeon Ave., Portland, OR. at 503.477.7566 97210 or visit www. flatlinefabrication.com.

Remember Flatline Fab is a full service house and can accommodate all your fabrication needs. For more information r e g a r d i n g Flatline Fab or all manuf acturing r e s o u r c e s r e p r e s e n t e d by SMH Inc. you may contact me directly.

Phone 425.501.7342 or email stephen@ smhincllc.com o r v i s i t w w w. smhincllc.com.

For all services Sneeze Guard For Counter represented by SMH Inc. visit www.smhincllc.com Phone 425.501.7342 or email stephen@ smhincllc.com.

SMH Inc. – “The Manufacturer’s Secret Weapon”

Swift Tool Co. Inc.

KENT 800-562-0900 KENT@SWIFTTOOL.COM SEATTLE 800-700-2801 SEATTLE@SWIFTTOOL.COM

414 MAXKOOL ULTRA Boeing APPROVED! #PSD D6147

5 GALLONS $185!!

55 GALLON DRUM $1,695!!

We’ll remove the old fluid, clean all your machines absolutely FREE then recharge them with Schaeffer’s!

Chlorine-free, exceptionally low foaming, bio-stable Heavy duty, suitable for both ferrous & non-ferrous metals including aerospace aluminum alloys Designed for high pressure, high speed machines Rejects tramp oil and other contaminates • Cutting Tools & Abrasives • Lubricant, Coolant & Solvents • Tool Vending • PVD Coating • Laser Marking • 5 Axis CNC Tool Remanufacturing • Machining Supplies, Tool Holding • Huge Inventory In Kent & Seattle A Z MANUFACTURING WEST COAST • 31 • JUNE - JULY ‘20 2

Buyer’s Guide & Card Gallery Equipment and Services

Cutting Tools made in the U.S.A. since 1964

w w w. t h i n b i t . c o m

A2ZWCBG2019.indd 1

12/6/2018 10:33:33 AM

Cutting Tool Mfg PVD Coating Sharpening Industrial Supplies Laser Marking Technical Support Tarik Swift tarik@swifttool.com Kent

Ofc (253) 854-7777 Fax (253) 854-7779 Seattle Sales

ACCESSORIES

Swift Tool Co, Inc.________ 800-562-0900 Swift Tool Co, Inc.________ 800-562-0900

Abrasive Systems Applications Specialities____ 253-872-0305 MESCO______________ 626-303-5680

S.L. Fusco San Leandro_____510-895-9000 S.L. Fusco R. Dominguez____ 310-868-1010 S.L. Fusco National City_____619-477-7733 Swift Tool Co, Inc._______ 800-562-0900 Air Cleaning Guns Royal Products_________631-273-1010 Air Coupliings Bilz USA____________ 224-563-7233 Auto-Bar Feed Systems Western Machine Center____408-955-1000 Ballscrews C & M Precision Spindle, Inc.__503-691-0955 Band Saws/Saw Blades Bandsaw Tech__________562--419-7675

Cycle Time Solutions_____510-708-8665 S.L. Fusco San Leandro_____510-895-9000 S.L. Fusco R. Dominguez____ 310-868-1010 S.L. Fusco National City_____619-477-7733

A2Z MANUFACTURING WEST COAST •

Coolant Chemicals: Ultrasonic Applications Specialities______253-872-0305 Bandsaw Tech__________ 562--419-7675 Star Metal Fluids________ 800-367-9966 Star Metal Fluids_________800-367-9966 Band Saw Repair US Shop Tools___________800-243-7701 Chip Removal Band Saw Replacement Parts

Bandsaw Tech__________ 562--419-7675 DATRON_____________ 480-826-3689

Coolant Systems & Chillers

MP Systems____________909-282-7463 Bar Feeders ChuckJaws & Adapters Automatics & Machinery Co., Inc_303-990-6190 Lucy’s Machine Company____ 323-587-6162 Star Metal Fluids_________800-367-9966 Swift Tool Co, Inc._________800-562-0900 Edge Technologies_______ 951-440-1574 Collets & Chucks Cutting Fluids & Oils Spinetti Machinery_______ 775-996-3770 Cycle Time Solutions______ 510-708-8665 Castrol_______________800-894-7773 Bar Feeder Repair Edge Technologies_______ 951-440-1574 Edge Technologies_______ 951-440-1574 Royal Products_________ 631-273-1010 S.L. Fusco San Leandro______510-895-9000 Boring Swift Tool Co, Inc.________ 800-562-0900 S.L. Fusco R. Dominguez_____310-868-1010 THINBIT_____________ 888-844-6248 US Shop Tools__________ 800-243-7701 S.L. Fusco National City______619-477-7733 Star Metal Fluids________ 800-367-9966 Cams CNC Lathe Accessories Dayton Lamina._________ 708-203-6684 Trusty-Cook___________ 877-240-2462 Swift Tool Co, Inc.________ 800-562-0900 Cutting Tools Von Ruden Manufacturing, Inc._763-682--3122 Carbide Tools, Indexable

Applications Specialities_____ 253-872-0305 CNC Spindle Liners Cycle Time Solutions______ 510-708-8665 Horizon Carbide_________ 602-524-3802 Trusty-Cook___________ 877-240-2462 Bilz USA_____________ 224-563-7233 Compressor Systems DATRON______________480-826-3689 MESCO______________ 626-303-5680 S.L. Fusco San Leandro_____ 510-895-9000 Ingersoll Rand__________ 206-472-0826 Horizon Carbide_________ 602-524-3802 S.L. Fusco R. Dominguez____ 310-868-1010 Innovative Tool Sales______ 714-780-0730 Cooling Systems S.L. Fusco National City_____ 619-477-7733 Buds Equipment Sales_____ 435-659-9455 MESCO_______________ 626-303-5680

32 • JUNE - JULY ‘20

Division of Curran Manufacturing Corporation

200 Oser Avenue Hauppauge, NY 11788 U.S.A.

Tel:

1-631-273-1010 1-800-645-4174 Fax: 1-631-273-1066 1-800-424-2082

www.royalprod.com

orders@royalprod.com

4740 NE 166th Avenue Portland, OR 97230 (503) 224-6061 (877) 398-6061 Fax (503) 253-1790 Cell (503) 572-9331 ERIC JAMES 15600 NE 8th, Ste B-1, #162 | Bellevue, WA 98008 Office: 425.881.1200 | Cell: 206.713.7748 | ejames@pmtnw.com

www.coastaluminum.com jpalmer@coastaluminum.com

John Palmer Jr.

www.pmtnw.com

Vice President: Northwest Region

Rosco Precision Machinery___ 206-818-6813 Lucy’s Machine Co._______323-587-6162 Drills/Cutters-Magnetic S.L. Fusco San Leandro_____510-895-9000 S.L. Fusco R. Dominguez____ 310-868-1010 Bilz USA____________ 224-563-7233

Filiter Mist Collectors

Ingersoll Rand__________206-472-0826

Royal Products_______631-273-1010

Live Centers Fixturing Royal Products_________631-273-1010 Innovative Tool Sales______714-780-0730 DATRON_____________ 480-826-3689 Load Unload Systems S.L. Fusco National City_____619-477-7733 Form Tooling Edge Technologies_______ 951-440-1574 Spinetti Machinery_______775-996-3770 S.L. Fusco San Leandro_____510-895-9000 S.L. Fusco R. Dominguez___310-868-1010 THINBIT_____________ 888-844-6248 Lubricants / Systems Swift Tool Co, Inc._______ 800-562-0900

THINBIT_____________888-844-6248 S.L. Fusco National City____619-477-7733 Grooving Head, Grooving Tools Drills/Reamers/Taps Cycle Time Solutions______ 510-708-8665 US Shop Tools__________800-243-7701 Bilz USA____________ 224-563-7233 THINBIT_____________ 888-844-6248 Von Ruden Manufacturing, Inc._763-682--3122 S.L. Fusco San Leandro_____510-895-9000 Guide Bushings, Swiss Cutting Tool Holders S.L. Fusco R. Dominguez____ 310-868-1010 Bilz USA____________ 224-563-7233 Edge Technologies_______ 951-440-1574

Innovative Tool Sales______714-780-0730 S.L. Fusco National City_____ 619-477-773 Swift Tool Co, Inc.________800-562-0900 Cutting Tool Systems EDM Materials & Supplies Bilz USA____________ 224-563-7233 Cycle Time Solutions______510-708-8665 Desert EDM____________480-816-6300

Hangsterfer’s__________316-640-2462 Hangsterfer’s__________760-580-1357

S.L. Fusco San Leandro____ 510-895-9000 S.L. Fusco R. Dominguez____ 310-868-1010 S.L. Fusco National City_____619-477-7733 Hydraulic Fluids Star Metal Fluids_______ 800-367-9966 S.L. Fusco San Leandro_____ 510-895-9000 Swift Tool Co, Inc._______ 800-562-0900 S.L. Fusco R. Dominguez___310-868-1010 Machine Tool Acccessories S.L. Fusco National City____619-477-7733 Swift Tool Co, Inc.________800-562-0900 Indestructable Keyboards US Shop Tools__________800-243-7701

Innovative Tool Sales______714-780-0730 S.L. Fusco San Leandro_____510-895-9000 S.L. Fusco R. Dominguez____ 310-868-1010 S.L. Fusco National City_____619-477-7733 Spinetti Machinery_______775-996-3770 THINBIT_____________888-844-6248

EDM Network_________480-836-1782

Dayton Lamina._________708-203-6684

Modular Spray Systems Fullerton Tool Company_____ 303-478-3497 Fabrication Tooling Swift Tool Co, Inc._______ 800-562-0900 Lifting & Material Handling Dayton Lamina._______708-203-6684

EDM Performance_______ 800-336-2946 Byte Box______________ 888-bytebox Von Ruden Manufacturing, Inc._763-682--3122 Inserts Machine Tool Cool Filtration End Mills Applications Specialities_____253-872-0305 Horizon Carbide_________ 602-524-3802 S.L. Fusco San Leandro____ 510-895-9000 Horizon Carbide_______602-524-3802 Swift Tool Co, Inc.________ 800-562-0900 S.L. Fusco R. Dominguez____ 310-868-1010 Jaws S.L. Fusco National City_____619-477-7733 S.L. Fusco San Leandro___510-895-9000 EDM Network__________ 480-836-1782 Star Metal Fluids_______ 800-367-9966 Deburring Tools S.L. Fusco R. Dominguez____ 310-868-1010 Milling & Turning Products Royal Products_________ 631-273-1010 S.L. Fusco National City_____619-477-7733 US Shop Tools__________ 800-243-7701 Von Ruden Manufacturing, Inc._763-682--3122 Die Tooling Springs Swift Tool Co, Inc.______800-562-0900 Keyseat Cutters Draw Tubes Von Ruden Manufacturing, Inc. Since 1946

Fluid Power / Mechanical / Tool Products ISO 9001:2008 Certified

Brandon Anderson President

MOBILE: 612.251.0868 E-MAIL: brandon@vonruden.com

DIRECT: 763.682.0322 PHONE: 763.682.3122 FAX: 763.682.3954

1008 First Street NE - PO Box 699 - Buffalo, MN 55313 USA Made in USA

www.vonruden.com

Driven Tooling for the Machine Tool Industry

Made in USA

A2Z MANUFACTURING WEST COAST •

33 • JUNE - JULY ‘20

Exclusive provider of OKUMA

Marc Goerlich Business Manager

GOSIGER NORTHWEST 21911 68TH Ave South Kent, WA 98032

www.SwiftTool.com

C 253.278.1110

E marc.goerlich@gosiger.com www.gosiger.com

Since 1922

ISO 9001:2008 Certified

GROUP

Brandon Anderson

Von Ruden Manufacturing, Inc. MOBILE: 612.251.0868 E-MAIL: brandon@vonruden.com

DIRECT: 763.682.0322 PHONE: 763.682.3122 FAX: 763.682.3954

1008 First Street NE - PO Box 699 - Buffalo, MN 55313 USA Made in Italy

www.live-tooling.com

Driven Tooling for the Machine Tool Industry

Made in Italy

Mounting Brackets Spindle Liners Innovative Tool Sales______714-780-0730 Lucy’s Machine Company____ 323-587-6162 Lucy’s Machine Company____ 323-587-6162 MESCO______________ 626-303-5680 Stamping Tooling APPRENTICESHIPS & TRAINING Packaging/Shipping Supplies Alliance Packaging______ 206-445-5898- Dayton Lamina._________ 708-203-6684 Aerospace & Advanced ManufacSupport Stands Parts Washing Equipment turing Apprenticeships Ebbco Inc____________800-809-3901 Lucy’s Machine Company____ 323-587-6162 AJAC______________ 206-737-8342 Threading Machining Apprenticeships Polycrystalline Diamond (PCD) THINBIT_____________ 888-844-6248 AJAC_______________206-737-8342 Fullerton Tool Company_____303-478-3497 Tooling Pins & Bushings Precision Metal Fabrication Power Tools Dayton Lamina._________ 708-203-6684 Apprenticeships Ingersoll Rand_________ 206-472-0826 Tool Sharpening (Grinding) AJAC_______________206-737-8342 Precision Bearings Applications Specialities_____ 253-872-0305 Training & Education C & M Precision Spindle, Inc.__ 503-691-0955 Swift Tool Co, Inc.________ 800-562-0900 AJAC_______________206-737-8342 Probing Systems Tooling Systems BANKING Sherpa Design_________ 503-771-3570 Applications Specialities_____ 253-872-0305 Quick Turn Financial______ 415-608-5692 Profiling Bilz USA_____________ 224-563-7233 Pacific Continental Bank____ 503-310-3604 THINBIT_____________ 888-844-6248 Cycle Time Solutions______ 510-708-8665 U.S. Bank Equipment_____ 800-810-0038 Punch Die Tooling Horizon Carbide_________ 602-524-3802 Dayton Lamina._________708-203-6684 Rosco Precision Machinery___ 253-333-2439 Valley Financial Services____818-968-4861 BUSINESS ADVISORS Safety Products RyansDovetails.com_______ 253-876-9981 US Shop Tools__________800-243-7701 S.L. Fusco San Leandro_____ 510-895-9000 Muerller Prost__________ 314-862-2070 BUSINESS MANAGEMENT Saw Blades & Replacement Parts S.L. Fusco R. Dominguez____ 310-868-1010 SOFTWARE SOLUTIONS Rocky Mountain Saw Blades_ 303--761-3000 S.L. Fusco National City_____ 619-477-7733 SawBlade.com_________ 800--240-2932 Spinetti Machinery_______ 775-996-3770 Vision 33 _______ 303-937-6543 Ext. 353

DOOR SYSTEMS Automatic Door opening Systems Midaco Corporation______ 847-593-8420 ENGINEERING/DESIGN Mechanical Design Creative Aero Engineering____ 562-443-7566 ERP SOFTWARE VIision 33____________206-456-5185 Business Management Software Solutions VIision 33____________206-456-5185 FINANCING EQUIPMENT Pacific Continental Bank____503-310-3604 U.S. Bank Equipment______800-810-0038 Valley Financial Services____818-968-4861 FORK LIFTS Bixby Machine Tool Supply___509-534-1208

CNC PROGRAMING TRAINING Solvents: Vapor degreasing THINBIT_____________ 888-844-6248 GARNET Star Metal Fluids________800-367-9966 Von Ruden Manufacturing, Inc._763-682--3122 GMA Garnet Group ______ 832-243-9300 Streamingteacher.com Western Sintering________ 509-375-3096 GRINDING Solvents:Hand Wipe CONSTRUCTION MANAGEMENT Vises & Vise Jaws Flywheel & Rotor Grinders, Star Metal Fluids________800-367-9966 Capacity Commercial Group__ 503-326-9000 RyansDovetails.com_______ 253-876-9981 CPA/ ACCOUNTING DCM Tech ____________ 800-533-5339 Solvents: Mil PRF 680 Workholding Muerller Prost__________ 314-862-2070 Grinding Filtration Star Metal Fluids________800-367-9966 Applications Specialities_ _ ___ 253-872-0305 DISIGN FOR MANUFACTURABILITY S.L. Fusco San Leandro_____ 510-895-9000 Special Tooling Cycle Time Solutions______ 510-708-8665 THINBIT_____________ 888-844-6248 3-D Plastics, Inc._________503-720-0572 S.L. Fusco R. Dominguez____ 310-868-1010

Gregory S. Pfeuffer

Partner and Business Advisor 3 Park Plaza | Suite 400 | Irvine | CA | 92614 gpfeuffer@muellerprost.com Phone: 314 862 2070

®

Advising with Vision® | www.muellerprost.com

A2Z MANUFACTURING WEST COAST •

34 • JUNE - JULY ‘20

Carlos R. Lugo Sales Manager

NORTH WESTERN - MAC H I ~_ E R Y ,

,-

'"

1222 S. Weller St. Seattle, WA 98144 www.nwmachinery.org

Email/Skype jd.wogoman@datron.com

(206) 583-2333 Fax (206) 583-0698 Cell (206) 898-6900 clugo@nwmachinery.org

Punch & Die Grinders DCM Tech ___________________ 800-533-5339 INSPECTION EQUIP HS&S Machine Tool______________ 408-472-2436

Hexagon_____________206-304-3847 King Machine Inc.________ 509-435-6741 Equipment Financing

Rosco Precision Machinery___ 206-818-6813

S.L. Fusco San Leandro_____ 510-895-9000 S.L. Fusco R. Dominguez____ 310-868-1010 S.L. Fusco National City_____ 619-477-7733 Swift Tool Co, Inc._______ 800-562-0900 Zeiss Industrial Metrology___800-327-9735 3D CAD for CMM S.L. Fusco National City_____ 619-477-7733 Hexagon_____________ 206-304-3847 Grinding Machines CMM Probes DCM Tech ____________ 800-533-5339 Hexagon_____________ 206-304-3847 Ellison Technologies_______ 206-669-3578 OGP ______________ 480-889-9056 Gosiger In WA__________ 937-586-5067 Zeiss Industrial Metrology___800-327-9735 Gosiger In CA__________ 714-446-7770 Coordinate Measuring Mach.

HS&S Machine Tool________408-472-2436 HS&S Machine Tool________408-472-2436 North-South Machinery_____ 562-690-7616 Hexagon_____________ 206-304-3847

CHARLIE TAYLOR 15600 NE 8th, Ste B-1, #162 | Bellevue, WA 98008 Office: 425.881.1200 | Cell: 503.781.2327 | ctaylor@pmtnw.com www.pmtnw.com

Business Insurance Solutions Sentry Insurance________ 877-373-6879 MACHINERY/MACHINE TOOLS Additive Manufacturing 3D Machines

Gosiger In WA__________ 937-586-5067 Gosiger In CA__________ 714-446-7770 Production Machine Tools, Inc._ 425-881-1200

Boring Mills Rosco Precision Machinery___ 253-333-2439 Bridgeport Parts Desert EDM____________480-816-6300

CNC Controls & Retro Fits Rosco Precision Machinery___ 253-333-2439 CNC Lathes Chevalier USA__________ 562-903-1929 Desert EDM____________480-816-6300

North Western Machinery____ 206-583-2333 OGP ______________ 480-889-9056 Ellison Technologies_______ 206-669-3578 Performance Machine Tools___ 510-249-1000 Zeiss Industrial Metrology___800-327-9735 Expand Machinery_______ 818-349-9166 Sharp Machine Tool_______ 310-944-8016 Laser Trackers Gosiger In WA__________ 937-586-5067 Guard & Vacuum Pedestals For Metrology Instruments Grinders HS&S Machine Tool________408-472-2436 Gosiger In CA__________ 714-446-7770 HS&S Machine Tool________408-472-2436 Midaco Corporation_______847-593-8420 Hexagon_____________ 206-304-3847 Sharp Machine Tool_______ 310-944-8016 OGP ______________ 480-889-9056 King Machine Inc.________ 509-435-6741 Zeiss Industrial Metrology___800-327-9735 KNUTH Machine Tools______ 847-415-3333 Grinders, Rotary

WWW.GANESHMACHINERY.COM

Santa Cruz Electronics______ 831-479-5444 Selway Machine Tool_______503-314-3165 Selway Machine Tool______ 425-931-1680

Selway Machine Tool______ 925-699-2522 Sharp Machine Tool_______ 310-944-8016 Spinetti Machinery_______ 775-996-3770 Summit Machine Tool______ 800-654-3262 CNC Lathes-Big Bore

Ganesh Machinery_______ 818-349-9166 3 , 4, & 5 Axis CNC Mills DATRON_____________ 480-826-3689 Desert EDM____________480-816-6300

Ellison Technologies_______ 206-669-3578 Expand Machinery_______ 818-349-9166 Gosiger In WA__________ 937-586-5067 HS&S Machine Tool________408-472-2436

Machine Toolworks_______ 800-426-2052 King Machine Inc.________ 509-435-6741 Optical Comparators Hexagon_____________ 206-304-3847 Methods Machine Tools Inc.___ 714-292-9384 Methods Machine Tools Inc.___ 714-292-9384 Industrial Surface Grinders DCM Tech ____________ 800-533-5339 Zeiss Industrial Metrology_800-327-9735 North-South Machinery______562-690-7616 North-South Machinery_____ 562-690-7616 Particle Inspection Mach North Western Machinery____ 206-583-2333 North Western Machinery____ 206-583-2333 DCM Tech ____________ 800-533-5339

DCM Tech ____________ 800-533-5339 Romi Machine Tools, Ltd_____ 480-510-4146 Production Machine Tools, Inc._ 425-881-1200 INSURANCE Rosco Precision Machinery___ 253-333-2439 Rosco Precision Machinery___ 253-333-2439 DCM Tech ____________ 800-533-5339 Silicon & Quartz

Exclusive provider of OKUMA

Michael Garver Sales Manager

GOSIGER NORTHWEST 21911 68TH Ave South Kent, WA 98032 T 253.826.3921 C 253.508.4771 E michael.garver@gosiger.com www.gosiger.com

A2Z MANUFACTURING WEST COAST •

35 • JUNE - JULY ‘20

The Industry’s Most Trusted Source to Buy, Sell, and Trade-In Used CNC, Plastics, and Sheet Metal Fabrication Machinery.

800.922.1674 • Purchase/Resale-Individual Machines/Entire Plants • Auctions • Certified Appraisal Services • Asset repossession and disposition services.

• Finance - leases, loans - working capital lines

7918 E. MCCLAIN DR., STE 101, SCOTTSDALE, AZ 85260

www.SwiftTool.com

Selway Machine Tool______ 503-314-3165 KNUTH Machine Tools______ 847-415-3333 Manual Mills And Lathes Swiss Screw Machines Selway Machine Tool______ 425-931-1680 Methods Machine Tools Inc.___ 714-292-9384 Ganesh Machinery_______818-349-9166 Spinetti Machinery______________ 775-996-3770 Selway Machine Tool______ 925-699-2522 North-South Machinery_____562-690-7616 HS&S Machine Tool_______ 408-472-2436 Turning Centers CNC 3 & 5 Axis Routing Machines KNUTH Machine Tools______ 847-415-3333 EDM Drilling & Micro Hole Spinetti Machinery______775-996-3770 Ellison Technologies_______ 206-669-3578 Machines Machine Toolworks_______ 800-426-2052 Used Wire EDM Machines CNC Slant Bed Turning Centers Current EDM, Inc. ________ 612-840-0037 North Western Machinery____ 206-583-2333 Current EDM, Inc. ________ 612-840-0037 Expand Machinery_______ 818-349-9166 HS&S Machine Tool_______ 408-472-2436 Sharp Machine Tool_______ 310-944-8016 Desert EDM___________ 480-816-6300 Methods Machine Tools Inc.___ 714-292-9384 Summit Machine Tool______800-654-3262 CNC Swiss Turn Machines EDM Network__________ 480-836-1782 Ellison Technologies_______ 206-669-3578 EDM Service Swift Tool Co, Inc._______ 800-562-0900 MATERIAL Gosiger In WA__________ 937-586-5067 EDM Network__________ 480-836-1782 Parts Washing Aluminum EDM Tooling Systems Gosiger In CA__________ 714-446-7770 Gosiger_____________ 937-586-5067 Bralco_____________ 602-722-3324 King Machine Inc.________ 509-435-6741 Desert EDM___________ 480-816-6300 Prototype Machines Coast Aluminum_________877-398-6061 LMI Machinery Inc.________866-437-7315 EDM Network__________ 480-836-1782 DATRON_____________ 480-826-3689 DIX Metals____________714-677-0788 Equipment Financing Machine Toolworks_______ 800-426-2052 Robotics & Automatics Fry Steel_____________800-423-6651 Methods Machine Tools Inc.___ 714-292-9384 Pacific Continental Bank____ 503-310-3604 Ganesh Machinery______818-349-9166 Gorilla Metals Inc.________855-516-3825 Saw Lubricants North-South Machinery______ 562-690-7616 Scottrade Bank Equip. Finance__206-948-0022 Industrial Metal Supply Co.___818-729-3333 North Western Machinery____ 206-583-2333 U.S. Bank Equipment______ 800-810-0038 Saw Service Of WA_______ 360-738-6437 Ryerson Corporation______425-204-2601 Sawing Machines Custom Design/Build Machines Gantry & Bridge Systems Sunshine Metals_________760-579-8327 Fahey Machinery Co., Inc.___503-620-9031 Lambie Engineering________509-868-3100 Ellison Technologies_______ 206-669-3578 Aluminum Extrusions Dot Peen Markers Kwik Mark Inc__________ 815-363-8268 EDM Automation

Methods Machine Tools Inc.___ 714-292-9384

HS&S Machine Tool_______ 408-472-2436 KNUTH Machine Tools______ 847-415-3333 Aluminum Precision______ 805-889-7569 North-South Machinery_____ 562-690-7616 Bralco_____________ 602-722-3324 Horizontal Boring & North Western Machinery____ 206-583-2333 Armor:Commercial Milling Machines (CNC )

HS&S Machine Tool_______ 408-472-2436 Performance Machine Tools___ 510-249-1000 Kloeckner Metals_______ 480-389-2883 Sharp Machine Tool_______ 310-944-8016 Rosco Precision Machinery___ 253-333-2439 Rocky Mountain Saw Blades__303-761-3000 Service Steel__________ 503-224-9500 EDM Die Sinking Machines Rosco Precision Machinery___ 206-818-6813 Armor: Military Grade Jig Boring Desert EDM___________ 480-816-6300 Methods Machine Tools Inc.___ 714-292-9384 Saw Replacement Parts Kloeckner Metals_______ 480-389-2883

Rocky Mountain Saw Blades__ 303-761-3000 Service Steel__________ 503-224-9500 EDM Filtration Brass CNC Machine Services______ 206-999-3232 Saw Service Of WA_______ 360-738-6437 Swift Tool Co, Inc._______ 800-562-0900 EDM Network__________ 480-836-1782 HS&S Machine Tool________408-472-2436 Bralco_____________ 602-722-3324 Saws Methods Machine Tools Inc.___ 714-292-9384 King Machine Inc._________509-435-6741 Coast Aluminum_________877-398-6061 Fahey Machinery Co., Inc.___ 503-620-9031 EDM Machines Coastal Metals__________800-811-7466 Rosco Precision Machinery___ 253-333-2439 Methods Machine Tools Inc.___ 714-292-9384

Lathes

CNC Machine Services______ 206-999-3232 Spinetti Machinery_______775-996-3770 King Machine Inc.________ 509-435-6741 Current EDM, Inc. ________ 612-840-0037 Summit Machine Tool______800-654-3262 Production Machine Tools, Inc._ 425-881-1200 Sub Spindle Lathes EDM Network__________ 480-836-1782 Laser Marking Machines

Gorilla Metals Inc.________855-516-3825

HS&S Machine Tool_______ 408-472-2436 Spinetti Machinery_______775-996-3770 Rosco Precision Machinery___ 253-333-2439

Ryerson Corporation______425-204-2601

A2Z MANUFACTURING WEST COAST •

36 • JUNE - JULY ‘20

Fry Steel_____________800-423-6651 Industrial Metal Supply Co.___818-729-3333

Richard Amy Regional Sales Manager 8300 San Fernando road Sun Valley, Ca 91352 MONday - frIday 7:00 aM to 5:00 PM saTurday 8:00 aM to 2:00 PM

BARTON INTERNATIONAL

8300 San Fernando road Sun Valley, Ca 91352

PHONE (818) 729-3333 fax (818) 729-3377 suNvallEy@IMsMETals.COM www.INdusTrIalMETalsuPPly.COM

MONday - frIday 7:00 aM to 5:00 PM saTurday 8:00 aM to 2:00 PM

PHONE (818) 729-3333 fax (818) 729-3377 suNvallEy@IMsMETals.COM www.INdusTrIalMETalsuPPly.COM

cell 951.551.2685 sales 800.741.7756 ramy@barton.com www.barton.com

Streamingteacher.com

Production Machine Tools, Inc._ 425-881-1200

METROLOGY PRODUCTS

Revolution Machine Tools____ 385-355-0316

8300 San Fernando road Sun Valley, Ca 91352

C

M

Y

CONTACT HS&S TODAY: 408-472-2436 JOHN@HSANDS.COM

Sequoia Brass & Copper____ 800-362-5255 Bronze Coastal Metals__________ 800-811-7466 Sequoia Brass & Copper____ 800-362-5255 Carbon Steel

CM

MY

Metals: Bar & Plate

CY

CMY

Altemp Alloys__________ 800-227-8103 K

Hexagon______________ 206-304-3847 MONday - frIday 7:00 aM to 5:00 PM saTurday 8:00 aM to 2:00 PM

PHONE (818) 729-3333 fax (818) 729-3377 suNvallEy@IMsMETals.COM www.INdusTrIalMETalsuPPly.COM

MONday - frIday 7:00 aM to 5:00 PM saTurday 8:00 aM to 2:00 PM

PHONE (818) 729-3333 fax (818) 729-3377 suNvallEy@IMsMETals.COM www.INdusTrIalMETalsuPPly.COM

Rosco Precision Machinery____253-333-2439 Fahey Machinery Co., Inc.___ 503-620-9031 Metrology Hardware

North-South Machinery______562-690-7616

Hexagon______________ 206-304-3847 Production Machine Tools, Inc._ 425-881-1200 Metrology Software

Fry Steel_____________ 800-423-665 Hexagon_8300 San Fernando road _____________ 206-304-3847 Sun Valley, Ca 91352 Ryerson Corporation______ 425-204-2601

8300 San Fernando road Sun Valley, Ca 91352

Laser & Fiber Laser Machines

Portable Metrology

MONday - frIday 7:00 aM to 5:00 PM saTurday 8:00 aM to 2:00 PM

PHONE (818) 729-3333 fax (818) 729-3377 suNvallEy@IMsMETals.COM www.INdusTrIalMETalsuPPly.COM

Sequoia Brass & Copper____800-362-5255 Hexagon______________ 206-304-3847

Revolution Machine Tools____ 385-355-0316 8300 San Fernando road Magnetic Drills/Cutters Sun Valley, Ca 91352

Innovative Tool Sales______ 714-780-0730 MONday - frIday 7:00 aM to 5:00 PM saTurday 8:00 aM to 2:00 PM

PHONE (818) 729-3333 fax (818) 729-3377 suNvallEy@IMsMETals.COM www.INdusTrIalMETalsuPPly.COM

Material Handling Systems

Hydmech Sawing Solutions___ 714-620-5560 Metrology Scanners Bralco______________ 602-722-3324 Sunshine Metals_________ 760-579-8327 Metal Marking Systems Coastal Metals__________ 800-811-7466 United Performance Metals__ _888-282-3292 Hexagon______________ 206-304-3847 Kwik Mark Inc__________ 815-363-8268 Nickel Alloys Metrology Maintenence Fry Steel_____________ 800-423-6651 8300 San Fernando road 8300 Inc._______ San Fernando road Swift Tool Co, 800-562-0900 Valley, Ca 91352 Sun Valley, Ca 91352 Altemp Alloys__________ 800-227-8103 Hexagon_Sun _____________ 206-304-3847 Laser Cutting Services, Inc____503-612-8311 Notchers Fry Steel_____________ 800-423-6651 NEW MACHINERY Ryerson Corporation______ 425-204-2601 Fahey Machinery Co., Inc.___ 503-620-9031 United Performance Metals__ _888-282-3292 FABRICATION Cobalt Alloys Plasma/Gas Cutting Tools/Systems Plate: Wear and Structural Production Machine Tools, Inc.__425-881-1200 United Performance Metals__ _888-282-3292 Fab - Line Machinery______ 206-972-6215 Kloeckner Metals________480-389-2883 Fahey Machinery Co., Inc.____ 503-620-9031 Copper Rosco Precision Machinery___ 253-333-2439 Ryerson Corporation______ 425-204-2601 Jorgensen Machine Tools_____ 800-952-0151 Bralco______________ 602-722-3324 Plate Bending & Rolls United Performance Metals__ _888-282-3292 North-South Machinery______ 562-690-7616 Fahey Machinery Co., Inc.___ 503-620-9031 Coast Aluminum_________ 877-398-6061 Precision Ground Flat Band & Cut Off Saws Jorgensen Machine Tools____ 800-952-0151 Gorilla Metals Inc.________ 855-516-3825 SUN GRINDING_________ 480-334-1005 Fahey Machinery Co., Inc.____ 503-620-9031 Plasma/Gas Cutting Systems Industrial Metal Supply Co.___ 818-729-3333 Sheet & Coil North-South Machinery______ 562-690-7616 Production Machine Tools, Inc._ 425-881-1200 Ryerson Corporation______ 425-204-2601 Ryerson Corporation______ 425-204-2601 North Western Machinery_____ 206-583-2333 Power Tools Sequoia Brass & Copper____ 800-362-5255 Stainless Steel & Steel Production Machine Tools, Inc.__425-881-1200 Icon Machine Tool, Inc. _____ 360-434-8844 Electrical Steels Bralco______________ 602-722-3324 Revolution Machine Tools_____ 385-355-0316 Icon Machine Tool, Inc. OR___ 503-887-1003 Fry Steel_____________ 800-423-6651 Fry Steel_____________ 800-423-665 Rosco Precision Machinery____253-333-2439 Presses High Temperature Alloys Gorilla Metals Inc.________ 855-516-3825 CNC Turret Punches Bixby Machine Tool Supply___509-534-1208 Altemp Alloys__________ 800-227-8103 Industrial Metal Supply Co.___818-729-3333 Muratec______________949-466-8255 Press Brakes United Performance Metals__ _888-282-3292 Kloeckner Metals________480-389-2883 Fahey Machinery Co., Inc.___ 503-620-9031 Drill Lines Laser Cut Material Laser Cutting Services, Inc___ 503-612-8311 Fahey Machinery Co., Inc.____ 503-620-9031 North-South Machinery______562-690-7616 Laser Cutting Services, Inc____503-612-8311 Ryerson Corporation______ 425-204-2601 Production Machine Tools, Inc._ 425-881-1200 Cold Saws/Saws Lead United Performance Metals___888-282-3292 Fahey Machinery Co., Inc.___ _503-620-9031 Revolution Machine Tools____ 385-355-0316 Industrial Metal Supply Co.___ 818-729-3333 MONday - frIday 7:00 aM to 5:00 PM saTurday 8:00 aM to 2:00 PM

PHONE (818) 729-3333 fax (818) 729-3377 suNvallEy@IMsMETals.COM www.INdusTrIalMETalsuPPly.COM

MONday - frIday 7:00 aM to 5:00 PM saTurday 8:00 aM to 2:00 PM

PHONE (818) 729-3333 fax (818) 729-3377 suNvallEy@IMsMETals.COM www.INdusTrIalMETalsuPPly.COM

Titanium Plate, Rod, Bar, & Wire

Punches Hydmech Sawing Solutions____ 714-620-5560 Fahey Machinery Co., Inc.___ 503-620-903 Bralco______________ 602-722-3324 KNUTH Machine Tools_______ 847-415-3333 Altemp Alloys__________ 800-227-8103 Icon Machine Tool, Inc. _____ 360-434-8844 Hardware Insertion Coast Aluminum_________ 877-398-6061 Laube Technology________888-355-2823 Coastal Metals__________ 800-811-7466 United Performance Metals__ _888-282-3292 Fahey Machinery Co., Inc.____ 503-620-9031 Icon Machine Tool, Inc. OR___ 503-887-1003 Material Sales

Fry Steel_____________ 800-423-6651

Tool Steel

Iron Workers

Revolution Machine Tools____ 385-355-0316

Rolling Machines Kloeckner Metals________ 480-389-2883 Industrial Metal Supply Co.___818-729-3333 Fahey Machinery Co., Inc.____ 503-620-9031 Jorgensen Machine Tools_____ 800-952-0151 Fahey Machinery Co., Inc.___ 503-620-9031 CNC MASTERCAM TRAINING United Performance Metals__ _888-282-3292 A2Z MANUFACTURING WEST COAST •

37 • JUNE - JULY ‘20

Midaco Corporation_______ 847-593-8420 Manual Lift Off Pallet Systems

Kim@A2Zmanufacturing.com

The Buyers Guide Reaches Over 14,000 Decision Makers In The West Coast Region WA, OR, & CA! What you get: FREE PR and 6 Categories with your company name and Phone # Only $260 For A Full Year!

Call Now For More Information!

480-773-3239 Kim@A2ZManufacturing.com

North-South Machinery______ 562-690-7616

CAD/CAM Software, CAD Applied CAx___________ 503-962-0287 MRP Software SigmaTEK____________ 513-595-2022 Nesting Software SigmaNEST___________ 513-595-2022 Software, Solid Modeling Delcam Software_________877-DELCAM1

Shearing Machines Fab - Line Machinery______ 206-972-6215 Fahey Machinery Co., Inc.___ 503-620-9031

PROTOTYPE MACHINERY Santa Cruz Electronics______ 831-479-5444 REAL ESTATE- COMMERCIAL Capacity Commercial Group__ 503-326-9000

REPAIR Icon Machine Tool, Inc. _____ 360-434-8844 CNC-PROS____________ 602-344-9753 North-South Machinery______562-690-7616 Bar Feeder Repair Revolution Machine Tools____ 385-355-0316 Edge Technologies_______ 951-440-1574

Sign & Graphic Cutting Solutions Tooling

Spindle Sales New

Olympus Controls_________503-582-8100

C & M Precision Spindle, Inc.__ 503-691-0955

ROUTERS

GMN USA LLC__________ 800-686-1679

Midaco Corporation_______847-593-8420 Rosco Precision Machinery____ 253-333-2439 TRAINING Manual Rotory Pallet Systems SAFETY Six Sigma Training Midaco Corporation_______847-593-8420 Fire Protection Systems Sustaining Edge Solutions____ 888-572-9642 Shipping Solutions Rotarex North America______ 480-689-8756 ISO Consulting/Registration Perry Pallet Co._________360-366-5239 Great Western Registrar_____ 623-580-1881 SAWS Wood Pallets Lean and NADCAP Consulting Band & Cut-Off Saws Perry Pallet Co._________360-366-5239 Training Swift Tool Co, Inc.________ 800-562-0900 PRECISION TOOLHOLDING Level III NDT Svcs________ 602-578-8109 SERVICES PRODUCTS ISO / AS9100 Certification Tooling AS9100 Registration BMSC_______________602-445-9400 Von Ruden Manufacturing, Inc._ 763-682--3122 Great Western Registrar______ 623-580-1881 Sustaining Edge Solutions____ 888-572-9642 Tooling Systems Custom Packaging/Shipping SupVon Ruden Manufacturing, Inc._ 763-682--3122 Productivity Training plies PRODUCTIVITY Scout Systems_ _________253-329-2460 Alliance Packaging________206-445-5898Productivity Tools and Systems USED MACHINERY Engineering/Mechanical Design Scout Systems_ _________253-329-2460 Sherpa Design__________ 503-771-3570 EDM Network___________480-836-1782 PROG. SYSTEMS Financial Services Jorgensen Machine Tools____ 800-952-0151 Factory Automation/Logistics Intech Funding__________800-553-9208 K.D. Capital Equipt_______ 480-922-1674

Automatics & Machinery Co.__303-990-6190

Revolution Machine Tools____ 385-355-0316

Ready-Robotics__________833-732-3967

ROBOTICS Ellison Technologies________206-669-3578

Quick Turn Financial_______ 415-608-5692 Machine Tool Rebuilding EDM Network___________ 480-836-1782 Management Systems Training

North Western Machinery____ 206-583-2333 Performance Machine Tools ___ 510-760-9518 ZACHMAN MachineRY INC. ____602-908-3447 WATERJET CUTTING

BMSC_______________ 602-445-9400

Fahey Machinery Co., Inc.____ 503-620-9031 Level III NDT Svcs_________ 602-578-8109 Flow Internatil__________ 909-620-5707 Sustaining Edge Solutions_____888-572-9642 King Machine Inc.________ 509-435-6741 Supply Chain Assessments Machine Toolworks_______ 800-426-2052 Sustaining Edge Solutions_____888-572-9642 Waterjet & Blast Abrasives, SOFTWARE CAD CAM Garnetentury Machining Barton International______ 800-741-7756 Applied CAx____________ 503-962-0287 Cimatron________ 248-596-9700 ext. 237 GMA Garnet Group _______ 832-243-9300 Solid Products___________480-206-0330 Waterjet Bricks Spinetti Machinery_______ 775-996-3770 Barton International______ 800-741-7756 Mechanical Design Cimatron________ 248-596-9700 ext. 237 Delcam______________ 877-335-2261

Sherpa Design__________ 503-771-3570

GMA Garnet Group _______ 832-243-9300 Waterjet Hoppers GMA Garnet Group _______ 832-243-9300

Waterjet Replacement Parts NDT III Consulting Services Level III NDT Svcs_________ 602-578-8109 Barton International______ 800-741-7756 Welding Equipment LMI Machinery Inc.________866-437-7315 EDM Performance________ 800-336-2946 Rocky Mountain Saw Blades__ 303-761-3000 Ready-Robotics__________833-732-3967 SPINDLES & SLIDES GMA Garnet Group _______ 832-243-9300 PALLET SYSTEMS Olympus Controls_________503-582-8100 Spindle Rebuilding/Repair Manual & Automatic WOOD PRODUCTS C & M Precision Spindle, Inc.___ 503-691-0955 Robotic Part Loading Systems Pallet Systems Midaco Corporation_______ 847-593-8420 GMN USA LLC___________ 800-686-1679 Perry Pallet Co.________ 360-366-5239

Fahey Machinery Co., Inc.___ 503-620-9031

A2Z MANUFACTURING WEST COAST •

Expand Machinery_______818-349-9166

38 • JUNE - JULY ‘20

Buyer’s Guide & Card Gallery Processes

The Manufacturer’s Secret Weapon

3D TOOLS

Cogitic_______________ 719-473-8844

CUTTING

Ebbco Inc______________586-716-5151

3D Printing Proto & Production

Evans Precision__________ 623-582-4776

Bar & Plate & Die Cutting

EDM: Drilling Small Hole

NW Rapid Mfg._________ 503-434-85577 PAS Technologies_________ 602-744-2600 AZ Tool Steel____________ 877-795-1600 Layke Inc._____________ 602-272-2654 3D Scanning NW Rapid Mfg.__________ 503-434-8557 SLS (Selctive Laser Sintering) ASSEMBLIES Systems Integrators ________ 623-434-3136 BENDING

Precision Casting Repair______ 801-972-2345 FLATLINE FAB___________ 503-707-9272 Precision Aerospace, LLC_____ 602-352-8658 Brazing:

Industrial Precision Grinding___ 310-352-4700

EDM: Ram-Type (Sinking)

Bolts Metalizing-CWST______602-244-2432

LASER CUTTING

Micropulse West, Inc._______ 480-966-2300

BROACHING Evans Precision__________ 623-582-4776 Ponderosa Ind____ _______303-298-1801 Specialty Steel Services______ 801-539-8252

Mandrel

CABLE ASSEMBLIES Albina Co., Inc. __________ 866-252-4628 Cascade Systems Technology___ 971-330-8054 Bending Solutions, Inc.______ 360-651-2443

CASTING

Aeroform, Inc. __________ 360-403-1919 Precision Enterprises Inc._____ 851-797-1000 Speciality Bending Albina Co., Inc. __________ 866-252-4628

FLATLINE FAB___________ 503-707-9272 Milco Wire EDM,, Inc._______ 714-373-0098 Precision Aerospace, LLC_____ 602-352-8658

DIE CASTING

SMH Inc LLC____________ 360-341-2226 Stevens Tool & Die_________ 503-682-3185 TVT Die Casting__________ 800-280-2278

EDM Solutions EDM: Wire

DIES

Clings Aerospace_________ 480-968-1778

Tool & Dies Micropulse West Inc.________ 480-966-2300 DEBURRING

Investment Casting-Precision

Industrial Precision Grinding____310-352-4700

Dolphin Investment Castings___ 602-272-6747

DESIGN

Evans Precision__________ 623-582-4776 Micropulse West, Inc._______ 480-966-2300 Milco Wire EDM,, Inc._______ 714-373-0098 Micropulse West, Inc._______ 480-966-2300

Bending Solutions, Inc.______ 360-651-2443 Precision Enterprises Inc._____ 851-797-1000 Plastic Injection Molding_____ 509-531-2634 FLATLINE FAB___________ 503-707-9272 Structrual Bending Precision Aerospace, LLC_____ 602-352-8658 EDGING CHEMICAL ETCHING Albina Co., Inc. __________ 866-252-4628 CMR Manufacturing________ 602-273-0943 Stevens Tool & Die_________ 503-682-3185 United Performance Metals___ _888-282-3292 ELECTRO MECHANICAL Tube and Pipe Bending PAS Technologies_________ 602-744-2600 EDM Albina Co., Inc. __________ 866-252-4628 Sub-Assembly Builds EDM: Dialectric Systems COATING Cascade Systems Technology___ 503-640-5733 BRAZING-JOINING /Filtration Bolts Metalizing-CWST______602-244-2432 A2Z MANUFACTURING WEST COAST •

39 • JUNE - JULY ‘20

ENGINEERING/DESIGN

SMH Inc LLC____________ 360-341-2226

Cascade Systems Technology___ 503-640-5733

Solid Form Fabrication_______503-435-1400

FLATLINE FAB___________ 503-707-9272

Weiser Engineering_________303-280-2778

Extrusions

Tube & Pipe Bending Fabrication

PAS Technologies_________ 602-744-2600 Liquid Painting Aero Tech MFG___________ 801-891-2740 Frontier Group__________602-437-2426

Plastic Extrusion Services

Albina Co., Inc. ___________866-252-4628 MPI International_________956-631-6880 Group Mfg Serv__________480-966-3952 Inline Plastics Inc._________ 909-923-1033 Bending Solutions, Inc._______ 360-651-2443 PAS Technologies_________ 602-744-2600 Industrial Machine Svcs______ 503-240-0878 FABRICATION Passivation FIBER OPTICS TESTING Precision Aerospace, LLC_____ 602-352-8658 Architectural Forming & Fabrication Clevland Electric Labs. _______ 480-967-2501 Coating Technologies_______623-581-2648 SMH Inc LLC____________ 360-341-2226 Albina Co., Inc. __________ 866-252-4628 Frontier Group__________602-437-2426 FINISHING Weiser Engineering________303-280-2778 FLATLINE FAB___________ 503-707-9272 Polishing Advanced Precision Anodizing____ 503-661-6700 Wrico_______________480-892-7800 Fabrication: Sheet Metal American Precision Ind.._______ 503-784-5211 Arizona Hard Chrome_______ 602-278-8671 Forming & Fabrication Powder Coating Aeroform, Inc. __________ 360-403-1919 Arizona Hard Chrome________ 602-278-8671 Albina Co., Inc. __________866-252-4628 Aero Tech MFG___________ 801-891-2740 Coating Technologies________623-581-2648 Aero Tech MFG___________ 801-891-2740 Bending Solutions, Inc.______ 360-651-2443 CLS Fabrication Inc________ 800-426-0721 American Precision Ind.._______503-784-5211 FLATLINE FAB____________ 503-707-9272 FLATLINE FAB___________ 503-707-9272 CLS Fabrication Inc________ 800-426-0721 Sandblasting PAS Technologies__________602-744-2600 Industrial Thermoplastics FLATLINE FAB___________ 503-707-9272 Real Axis Machining_________360-723-5386 Byington Steel Treating, Inc.____408-727-6630 Clevland Electric Labs. ______ 480-967-2501 NW Metalcraft Industries_____ 888-280-7080 Shot Peen Titanium Coating Services______562-548-2550 Precision Sheet Metal Fabrication: Mountain View Machine______ 435-755-0500 PAS Technologies_________ 602-744-2600 DRY FILM LUBRICATION Medium & Large Silk Screening Precision Aerospace, LLC_____ 602-352-8658 Bolts Metalizing-CWST______602-244-2432 Aeroform, Inc. __________ 360-403-1919 QUAL-FAB, Inc.____________206-762-2117 Frontier Group__________602-437-2426 Arizona Finishing_________602-438-4443 American Precision Ind..____503-784-5211 CLS SMH Inc LLC____________ 360-341-2226 Galvanizing: Hot Dip FIXTURING FLATLINE FAB___________ 503-707-9272 Weiser Engineering________ 303-280-2778 Group Mfg Serv__________480-966-3952 TMM Precision ___________800-448-9448 Real Axis Machining________360-723-5386 Fabrication: Custom Metal

Industrial Machine Svcs______ 503-240-0878

Glass Bead Clean

GASKETS

American Precision Ind.._______503-784-5211 Precision Aerospace, LLC_____ 602-352-8658 Byington Steel Treating, Inc._____408-727-6630 3-D Plastics, Inc.__________503-720-0572 FLATLINE FAB___________ 503-707-9272 QUAL-FAB, Inc.___________ 206-762-2117 Coating Technologies________623-581-2648 A2Z MANUFACTURING WEST COAST

• 40 • JUNE - JULY ‘20

GRINDING

Shawn Carlin scarlin@gmsaz.com

Rich Schwab

Sr. Sales Representative 361 South 52nd Street • Tempe, AZ 85281 Phone: 480-967-2501 • Fax: 480-967-2530 rschwab@cel-atg.com Cell: 480-375-1437

www.clevelandelectriclabs.com

AZ Hard Chrome__________ 602-278-8671

Grinding, Centerless

Superior Grinding_________888-487-9701

AZ Tool Steel____________ 877-795-1600 Ron Grob Co____________ 970-667-5320 Swift Tool Co, Inc._________800-562-0900 ChemResearch___________ 602-253-4175 Sun Grinding___________ 602-238-9595 Cogitic_______________ 719-473-8844

Grinding, Double Disc

ISO/IEC 17025

Large Capacity Drop Bottom Oven/Aluminum Byington Steel Treating______408-727-6630

GUN DRILLING Evans Precision__________ 623-582-4776

MET-TEK Heat Treating______503-519-9864

Evans Precision__________ 623-582-4776 Bourdelais Grinding Co., Inc.___ 805-583-9966

HEAT TREATING

HONING/LAPPING

Industrial Machine Svcs______ 503-240-0878 Industrial Precision Grinding___ 310-352-4700

Bolts Metalizing-CWST______602-244-2432

PAS Technologies_________ 602-744-2600

Industrial Precision Grinding___ 310-352-4700 Sun Grinding___________ 602-238-9595

Byington Steel Treating_____408-727-6630

Mountain View Machine______ 435-755-0500 TCI Precision Metals________ 800-234-5613

Controlled Thermal Tech_____602-272-3714

Ron Grob Co____________ 970-667-5320

Grinding: OD

Steel Services Grinding______ 800-662-0126 Arizona Hard Chrome_______ 602-278-8671 Sun Grinding___________ 602-238-9595 Bourdelais Grinding Co., Inc.___ 805-583-9966 Superior Grinding_________ 801-487-9700 Precision Tech___________ 801-285-7288 Ron Grob Co____________ 970-667-5320

Grinding, Blanchard

Evans Precision__________ 623-582-4776 MET-TEK Heat Treating______503-519-9864 PAS Technologies_________ 602-744-2600 Phoenix Heat Treating______602-258-7751 Cryogenics

AZ Tool Steel____________ 877-795-1600 Sun Grinding___________ 602-238-9595 Phoenix Heat Treating_______ 602-258-7751 Bourdelais Grinding Co., Inc.___ 805-583-9966 Superior Grinding_________ 801-487-9700 Grinding: Surface

Diversified Metal Services_____ 801-972-6093

Heat Treating/ISO/AS9100 Bolts Metalizing-CWST______602-244-2432

Precision Aerospace, LLC_____ 602-352-8658 Portland Precision Manufacturing_ 503-253-6700 Real Axis Machining________ 360-723-5386 Ron Grob Co____________ 970-667-5320 SMH Inc LLC____________ 360-341-2226 Sunshine Metals___________714-225-4972 Treske Precision Machining _____503-625-2821 TVT Die Casting__________ 800-280-2278 VWeiser Engineering_______ 303-280-2778 Industrial Thermoplastics

Clevland Electric Labs. ______ 480-967-2501 Evans Precision__________ 623-582-4776 Bourdelais Grinding Co., Inc.___ 805-583-9966 Byington Steel Treating______408-727-6630 Industrial Precision Grinding___ 310-352-4700 Industrial Precision Grinding___ 310-352-4700 Phoenix Heat Treating_______602-258-7751 Steel Services Grinding______ 800-662-0126 PAS Technologies_________ 602-744-2600

Heat Treating/Aerospace

Machining: 5-Axis Accutech Machine Inc________ 801-975-1117

Sun Grinding___________ 602-238-9595 Superior Grinding_________ 801-487-9700 Byington Steel Treating______408-727-6630 American Precision Ind.._______503-784-5211 Superior Grinding_________ 801-487-9700 A2Z MANUFACTURING WEST COAST

Grinding: Tool & Cutter

• 41 • JUNE - JULY ‘20

Phoenix Heat Treating_______602-258-7751 Cascade Engineering Tech ____ 503-266-1300 A2Z MANUFACTURING WEST COAST

• 41 • JUNE - JULY ‘20

Passivation, Electroless Nickel, Gold, Hard Chrome, Silver, & Tin Plating. 206-947-4052 geoffs@askogroup.com Clings Aerospace__________480-968-1778 American Precision Ind.._______ 503-784-5211 Clevland Electric Labs. ______ 480-967-2501 Strom Manufacturing________ 503-447-1021 Cascade Engineering Tech _____503-266-1300 Die-Tech Precision Machining____ 669-888-350 Treske Precision Machining _____503-625-2821 Clevland Electric Labs. _______480-967-2501 Flex-Pro Manufacturing.______623-466-6866 Machining: Aerospace American Precision Ind.._______ 503-784-5211 Clevland Electric Labs. _______480-967-2501 Flex-Pro Manufacturing.______ 623-466-6866 Larkin Precision Machine______831-438-2700 Layke Inc._____________ 602-272-2654 Precision Aerospace, LLC_____ 602-352-8658 Portland Precision Manufacturing_ 503-253-6700 Strom Manufacturing________ 503-447-1021 SMH Inc LLC_____________360-341-2226 Teton Machine __________ 208-642-9344 Treske Precision Machining _____503-625-2821 Machining: Ceramics Advanced O’Keefe Ceramics__________719-687-0888 Machining: Proto-R & D American Precision Ind.._______ 503-784-5211 Cascade Engineering Tech _____503-266-1300 Clevland Electric Labs. _______480-967-2501 Newport Tool.____________ 801-295-7411 Portland Precision Manufacturing_ 503-253-6700 Real Axis Machining________ 360-723-5386 Ron Grob Co_____________970-667-5320 SMH Inc LLC_____________360-341-2226 Strom Manufacturing________ 503-447-1021 Treske Precision Machining _____503-625-2821

Die-Tech Precision Machining____669-888-3500 Grovtec US, Inc. __________ 503-557-4689 Faustson______________ 303-420-7422

Howard Precision Machined Prod._801-619-9850

Flex-Pro Manufacturing.______ 623-466-6866

Newport Tool.____________801-295-7411 Pacific Swiss & Manufacturing__ 503-557-9407

Grovtec US, Inc. __________ 503-557-4689

Portland Precision Manufacturing_503-253-6700

Layke Inc._____________ 602-272-2654

Strom Manufacturing_______ 503-447-1021

Micropulse West, Inc._______ 480-966-2300

Teton Machine __________208-642-9344

MANUFACTURING VALUE ADDED

Machining: Swiss

Contract Manufacturing

Precision Aerospace, LLC_____ 602-352-8658 Portland Precision Manufacturing_ 503-253-6700 Real Axis Machining________ 360-723-5386 Ron Grob Co____________ 970-667-5320 SMH Inc LLC____________ 360-341-2226 Strom Manufacturing________503-447-1021 Teton Machine __________ 208-642-9344

Machining: Ultra Precision

Machining: Turning With Live Tooling Weiser Engineering________ 303-280-2778

Grovtec US, Inc. __________ 503-557-4689 AATC________________ 602-268-1467 Howard Precision Machined Prod._801-619-9850 Aeroform, Inc. __________ 360-403-1919 Pacific Swiss & Manufacturing__ 503-557-9407 Albina Co., Inc. __________ 866-252-4628 Teton Machine __________208-642-9344 Alpha Precision Machining, Inc. __ 253-395-7381 Machining: Turning

American Precision Ind..______ 503-784-5211

Accutech Machine Inc_______ 801-975-1117 Bending Solutions, Inc.______ 360-651-2443 Clevland Electric Labs. ______ 480-967-2501 Accutech Machine Inc________ 801-975-1117 American Precision Ind..______ 503-784-5211 CLS Fabrication Inc________ 800-426-0721 Alpha Precision Machining, Inc. __ 253-395-7381 Clevland Electric Labs. ______ 480-967-2501 FLATLINE FAB___________ 503-707-9272 American Precision Ind.._______ 503-784-5211 Die-Tech Precision Machining____ 669-888-350 Flex-Pro Manufacturing.______ 623-466-6866 Cascade Engineering Tech ____ 503-266-1300 Faustson______________ 303-420-7422 G & G Custom Metal Fab_____ 503-931-7069 Flex-Pro Manufacturing.______623-466-6866 Machining: Medical Grovtec US, Inc. __________ 503-557-4689 Group Mfg Serv__________ 480-966-3952 American Precision Ind.._______ 503-784-5211 Howard Precision Machined Prod._801-619-9850 Larkin Precision Machine_____ 831-438-2700 Cascade Engineering Tech ____ 503-266-1300 Portland Precision Manufacturing_ 503-253-6700 Larkin Precision Machine_____ 831-438-2700 Flex-Pro Manufacturing.______ 623-466-6866 Teton Machine __________ 208-642-9344 Layke Inc._____________602-272-2654 Portland Precision Manufacturing_ 503-253-6700 Portland Precision Manufacturing_503-253-6700 Treske Precision Machining ____ 503-625-2821 Teton Machine __________ 208-642-9344 TVT Die Casting__________ 800-280-2278 Real Axis Machining________360-723-5386 Machining: Large

Machining: Production

Ron Grob Co____________ 970-667-5320

Industrial Manufacturing

TVT Die Casting__________ 800-280-2278 Accutech Machine Inc________ 801-975-1117 =SMH Inc LLC____________ 360-341-2226 Albina Co., Inc. __________ 866-252-4628 Machining: CNC Milling

American Precision Ind.._______ 503-784-5211 Strom Manufacturing_______ 503-447-1021 Machinists Inc.___________ 360-202-7342

Accutech Machine Inc________ 801-975-1117 Cascade Engineering Tech ____ 503-266-1300 A2Z MANUFACTURING WEST COAST

• 42 • JUNE - JULY ‘20

Teton Machine __________208-642-9344

Turnkey Product Services

METAL FABRICATION: DESIGN, LASER CUTTING, FORMING, WELDING, CUSTOM FINISHING 4322 NW Yeon Ave., Portland, OR 97210 Josh Henry: 503.707.9272 503.477.7566 WWW.FLATLINEFAB.COM

Surface Mount & Thru Hole

Foresight Finishing________ 480-772-0387

Cascade Systems Technology___ 971-330-8054 Leadtek Plating__________ 503-682-4410

Aero Tech MFG___________801-891-2740 Custom Airplane to Marine Polish-

PAINTING

PAS Technologies_________ 602-744-2600

FLATLINE FAB___________ 503-707-9272

Anodizing

PAS Technologies_________ 602-744-2600 Advanced Precision Anodizing___ 503-661-6700 PLASTIC EXTRUSION

ing

Custom Plastic Profiles

Metal Polishing By Timothy___ 503-253-5294

Inline Plastics Inc._________ 909-923-1033

Personal Collectables Polishing

Custom Plastic Tubing

Metal Polishing By Timothy___ 503-253-5294

Inline Plastics Inc._________ 909-923-1033

Production Polishing

Custom Thermoplastics

Metal Polishing By Timothy___ 503-253-5294

Inline Plastics Inc._________ 909-923-1033

METALIZING

Extrusion Die Development

Controlled Thermal Tech _____602-272-3714

Inline Plastics Inc._________ 909-923-1033

MOLDING: RUBBER

Custom Plastic Spiraling

Molds: Plastic Injection

Inline Plastics Inc._________ 909-923-1033

Plastic Injection Molding_____509-531-2634

Custom Plastic Finishing

SMH Inc LLC____________360-341-2226

Inline Plastics Inc._________ 909-923-1033

MOLDS

PLASTIC MACHINING

Aero Tech MFG___________ 801-891-2740

Portland Precision Manufacturing_ 503-253-6700

Advanced Mold Technology____ 714-990-0144

PLASTIC MOLDING

Arizona Finishing_________ 602-438-4443

3-D Plastics, Inc.__________ 503-720-0572

Milco Wire EDM,, Inc._______ 714-373-0098

Plastic Injection Molding_____ 509-531-2634

Plastic Injection Molding_____ 509-531-2634

SMH Inc LLC____________ 360-341-2226

Molds: High Volume Class 100

Mold Making

Advanced Mold Technology____ 714-990-0144

3-D Plastics, Inc.__________ 503-720-0572

Molds: Fast Turn Prototype and

Plastic Injection Molding_____ 509-531-2634

Bridge Molds Advanced Mold Technology____ 714-990-0144 Molds: Expertise in Overmold and Insert Molding Advanced Mold Technology____ 714-990-0144 PC BOARDS

ChemResearch___________ 602-253-4175 Frontier Group___________ 602-437-2426 Leadtek Plating__________ 503-682-4410 PAS Technologies_________ 602-744-2600

Precious Metal Plating Co.______800-481-6271 Chem Film Frontier Group____________602-437-2426 Savon Plating, Inc__________ 602-252-4311 PAS Technologies_________ 602-744-2600

Black Oxide PAS Technologies_________ 602-744-2600

Chromate\ Advanced Precision Anodizing___ 503-661-6700

Bright Tin Foresight Finishing________ 480-772-0387

Chrome/Nickel/Palladium/Teflon

Leadtek Plating__________ 503-682-4410 AZ Hard Chrome___________602-278-8671

ISO/AS9100D CERTIFIED

We believe that we are stronger and more viable when we manufacture precision components for USA Manufacturing!

Put our Machining Passion to work for you!

PLATING Advanced Precision Anodizing___ 503-661-6700 ASKO Group____________ 206-947-4052 ChemResearch___________ 602-253-4175 EPSI________________ 714-519-9423 Frontier Group___________ 602-437-2426 A2Z MANUFACTURING WEST COAST •

43 • JUNE - JULY ‘20

PLASMA CUTTING

EPSI_________________ 714-519-9423

G & G Custom Metal Fab______ 503-931-7069

Savon Plating, Inc__________ 602-252-4311 PAS Technologies_________ 602-744-2600

1538 E La Vieve Lane, Tempe, AZ 85284

Aeroform, Inc. __________360-403-1919

Coating Coating Technologies________ 623-581-2648 Controlled Thermal Tech ______ 602-272-3714 Coating: Black Oxide Coating Technologies________ 623-581-2648 PAS Technologies__________602-744-2600 Coating: Dry Film Lube

Pacific Tool, Inc___________ 425-882-1970 ASKO Group____________ 206-947-4052

ASKO Group____________ 206-947-4052

Foresight Finishing________ 480-772-0387

Frontier Group___________ 602-437-2426

Leadtek Plating__________ 503-682-4410

Leadtek Plating__________ 503-682-4410

Precious Metal Plating Co._____ 800-481-6271

PAS Technologies_________ 602-744-2600

Savon Plating, Inc_________ 602-252-4311

Phosphate

PAS Technologies_________ 602-744-2600

Frontier Group___________ 602-437-2426

Glass Bead Clean

Shot Peen

Coating Technologies________ 623-581-2648

PAS Technologies__________602-744-2600 PAS Technologies_________ 602-744-2600 Coating: Nickel/ Teflon/Chrome Gold Coating Technologies________ 623-581-2648 Coating:Zinc & Mag.Phos.

Coating Technologies________ 623-581-2648 Leadtek Plating___________ 503-682-4410 Savon Plating, Inc__________ 602-252-4311 Copper Foresight Finishing_________ 480-772-0387 PAS Technologies__________602-744-2600 Drylube Frontier Group____________ 602-437-2426

Wrico________________480-892-7800 PROCESSING: METAL Chemical LA Specialties____________ 602-269-7612 PROTOTYPES Cascade Systems Technology____503-640-5733

EPSI________________ 714-519-9423

EPSI________________ 714-519-9423

Foresight Finishing________ 480-772-0387

Leadtek Plating__________ 503-682-4410 CLS Fabrication Inc_________ 800-426-0721

Leadtek Plating__________ 503-682-4410

Savon Plating, Inc_________ 602-252-4311 Group Manufacturing Serv_____480-966-3952

Precious Metal Plating Co._____ 800-481-6271 PAS Technologies_________ 602-744-2600

Silver Plating

PUNCHING

QUAL-FAB, Inc.____________ 206-762-2117

ASKO Group____________ 206-947-4052 Weiser Engineering_________303-280-2778

Hard Chrome

EPSI________________ 714-519-9423

Arizona Hard Chrome_______ 602-278-8671

Leadtek Plating__________ 503-682-4410

ASKO Group____________ 206-947-4052

PAS Technologies_________ 602-744-2600

NAD CAP & Boeing Approved

Precious Metal Plating Co._____ 800-481-6271

Processes

Savon Plating, Inc_________ 602-252-4311

Bin Service

Tin Plating

Metro Metals Northwest ______ 503-819-1284

Precious Metal Plating Co._____ 800-481-6271

Excess Material Handling

Leadtek Plating___________ 503-682-4410

Nickel-Bright Foresight Finishing________ 480-772-0387

EPSI_________________ 714-519-9423 Leadtek Plating__________ 503-682-4410 Savon Plating, Inc__________ 602-252-4311 Precious Metal Plating Co._____ 800-481-6271 A2Z MANUFACTURING WEST COAST

Tin / Zinc Plate

SpringWorks Utah__________ 801-298-0113

ASKO Group____________ 206-947-4052 NW Rapid Mfg.___________ 503-434-8557

ASKO Group_____________ 206-947-4052 Precious Metal Plating Co._____ 800-481-6271

Embrittlement Relief

PAS Technologies_________ 602-744-2600

QUAL-FAB, Inc.____________ 206-762-2117

ASKO Group____________ 206-947-4052

Electro-Polishing

Electroless Nickel

PRECISION FORMING

• 44 • JUNE - JULY ‘20

Passivation

RECYCLING MATERIALS Aluminum, Brass, Copper, Nickel, Plastics, Stainless Steel, Steel, Tin Metro Metals Northwest ______ 503-819-1284

Leadtek Plating__________ 503-682-4410 Metro Metals Northwest ______ 503-819-1284 Zinc Nickel

Full Service Scrap Management

PAS Technologies_________ 602-744-2600 Metro Metals Northwest ______ 503-819-1284

Bryan Crawford

1847 Elmfield Ave. Long Beach, CA, 90815 562-597-7824 cell: 562-243-4659 becrawford@mindspring.com

SALES SERVICE CONSULATION

Wood Products

NW Metalcraft Industries_____ 888-280-7080

TUBE BENDING &

FLATLINE FAB____________503-707-9272

Perry Pallet Co.__________ 360-366-5239

Precision Die & Stamping_____ 480-967-2038

CUTTING FAB

Weiser Engineering_________303-280-2778

REPAIR CNC-PROS_____________ 602-344-9753 ROLLING Albina Co., Inc. __________ 866-252-4628 SANDBLASTING Advanced Precision Anodizing___ 503-661-6700 Byington Steel Treating, Inc.____ 408-727-6630

SpringWorks Utah_________ 801-298-0113 Albina Co., Inc. __________866-252-4628 Stamping:Design

Bending Solutions, Inc.______360-651-2443

Evans Precision___________ 623-582-4776

SpringWorks Utah_________ 801-298-0113 Clings Aerospace_________480-968-1778

FLATLINE FAB____________503-707-9272

Stamping:Flat Forming

EZ-ACCESS_____________800-258-8503

NW Metalcraft Industries_____ 888-280-7080

TURBINE ENGINE TESTING

Ace Wire & Spring Form_______412-458-4830

Clevland Electric Labs. ______480-967-2501

Evans Precision___________ 623-582-4776

SpringWorks Utah_________ 801-298-0113 Stamping: Light

WATERJET CUTTING

Production Sawing

SpringWorks Utah_________ 801-298-0113 Accutech Machine Inc_______ 801-975-1117

Bourdelais Grinding Co., Inc.___ 805-583-9966

Systems Integrators ________ 623-434-3136 Aeroform, Inc. __________ 360-403-1919

SEWING Grovtec US, Inc. __________ 503-557-4689 SHEARING United Performance Metals___ _888-282-3292 SIGNAGE & DISPLAYS

Stamping: Production/

Milco Waterjet___________ 714-373-0098

Precision

Precision Aerospace, LLC_____602-352-8658

SUPPLY CHAIN MANAGEMENT

SW Waterjet & Laser________480-306-7748

Cascade Systems Technology___ 503-640-5733 United Performance Metals____888-282-3292 TESTING

5-Axis Waterjet Cutting

SILICONE

Non-Destructive Testing

Rickard Engineering _______866-845-8838

3-D Plastics, Inc.__________ 503-720-0572

Frontier Group___________ 602-437-2426

Micro-Machining

Western Sintering_________ 509-375-3096 SLITTING United Performance Metals___ _888-282-3292 SPINNING Evans Precision__________ 623-582-4776 SPLINES Specialty Steel Services______ 801-539-8252 SPRINGS Ace Wire & Spring Form______ 412-458-4830 SpringWorks Utah__________801-298-0113 SPRINGS: CUSTOM Extension/Compression/ Coil Ace Wire & Spring Form______ 412-458-4830 STAMPING PRECISION AEI Fabrication__________ 480-733-6594

WIRE FORMING

FLATLINE FAB____________503-707-9272

Precision Die & Stamping_____ 480-967-2038 Rickard Engineering _______866-845-8838

Milco Wire EDM,, Inc._______ 714-373-0098

SINTERING

Welding: MIG-TIG

PAS Technologies_________ 602-744-2600 Rickard Engineering _______866-845-8838 Turbine Instrument Testing WELDING Clevland Electric Labs. ______ 480-967-2501 Evans Precision__________ 623-582-4776 THERMAL SPRAY FLATLINE FAB___________503-707-9272 Bolts Metalizing-CWST______602-244-2432 Frontier Group___________602-437-2426 Controlled Thermal Tech _____ 602-272-3714 Mountain View Machine______435-755-0500 THREAD ROLLING PAS Technologies_________602-744-2600 Ron Grob Co____________ 970-667-5320 Precision Aerospace, LLC_____602-352-8658 TOOL & DIE DESIGN Weiser Engineering________303-280-2778 Newport Tool.___________ 801-295-7411 Weld Metal Works_________ 503-788-5701 Wrico_______________ 480-892-7800 Laser Welding and Services TOOLING Clevland Electric Labs. ______480-967-2501 Industrial Machine Svcs______ 503-240-0878 Robotic Welding Mountain View Machine______ 435-755-0500 Bending Solutions, Inc.______360-651-2443 Newport Tool.___________ 801-295-7411 Welding: Precision Real Axis Machining________ 360-723-5386 Evans Precision__________ 623-582-4776

Kim@A2Zmanufacturing.com

The Buyers Guide Reaches Over 14,000 Decision Makers In The West Coast Region WA, OR, & CA! What you get: FREE PR and 6 Categories with your company name and Phone # Only $260 For A Full Year!

Call Now For More Information!

480-773-3239 Kim@A2ZManufacturing.com

A2Z MANUFACTURING WEST COAST

• 45 • JUNE - JULY ‘20

Index of Advertisers 3D-Plastics...27,39

Flex-Pro...40,43

Precious Metals Plating...29,39

Accutech Machine, inc...43

Flow...32,33

Precision Aerospace, LLC...41

Ace Wire & Spring Form...44

Foresight Finishing...1,14,15,44

Precision Die & Stamping...14,39

Advanced Precision Anodizing...41

Frontier Group...22,39

Precision Enterprises...41

Aeroform, Inc...42

Gentech...40

Production Machine Tools...33,35

Aero Tech Manufacturing...40

GMN...22,34

Albina Co, Inc...7,39

Gosiger in WA...34,35

Real Axis Machining...43

Allied Tool and Die...

Gosiger in CA...34

American Precision Industries...41

Graphel...40

Application Specialties Inc...32

Group Manufacturing...40

Arizona Finishing...41

Grovtec...39,48

Asko Group...42

HS&S Machine Tool...36,37

Barton...24,37

Hexagon Metrology...35

BC Bar Feeds...45

Horizon Carbide...36

Bending Solutions...45

Hurco...21

BMSC...5,26,32

Industrial Metal Supply Co....22,37

Bralco...34

Industrial Precision Grinding...44

SMH Inc LLC...30,39

Byington Steel Treating...41

INLINE PLASTICS, INC....41,47

Specialty Steel...40

Bystronic...33

KD Capital...36

Spinetti Machinery...11,33

Capacity Commercial Group...20,37

Kloeckner Metals-Temtco...18,33

Spring Works Utah...40

Cascade Engineering Tech...42

Landmark Solutions...34

StandardAero...20,41,44,45

Cleveland Electric Labs...29,41

Laube Titanium Mill Prod....37

Star Metal Fluids...33

CLS Fabrication Inc...40

Layke Inc...43

Starrett...35

Coast Aluminum...33

Leadtek...44

Steel Services Grinding...41

Coastal Metals...6,33

Lucy’s Machine...43

Strom Manufacturing...39

Coating Technologies...40

Mario Pinto...34

Sun Grinding...40

Controlled Thermal Tech...43

MET-TEK Inc...40

Superior Grinding...40

Curtis Wright...41

Methods Machine Tools Inc...17,33

Cycle Time Solutions...43

Metro Metals Northwest, Inc...42

Superior Metal Shapes...28,36

Die-Tech Precision Machine...40

Micropulse West...41

DMG MORI...15

Midaco Corporation...34

Doosan...15,40

Milco...44

EDM Network...19,32

Mountain View Machining...41

EDM Performance..32,33

MP Systems...35

Edge Technologies...10,33

Mueller Prost...34

Ellison Technologies...9,32

Newport Tool...44

EPSI...42

North-South Machinery...25,32,40

Evans Precision...45

Northwestern Machinery...35

Expand Machinery...

Pacific Swiss...39

Weiser Engineering...41

Fahey Machinery...,13,33,34, 35

Performance Machine Tools...8,36

Western Sintering...26,39

Faustson...40

Phoenix Heat Treat...41

Wrico Stamping...44

FLATLINE FAB...43

Portland Precision...42

Zeiss Metrology...32

A2Z MANUFACTURING WEST COAST •

46 • JUNE - JULY ‘20

RENISHAW...12,32 ReSell CNC...36 Ron Grob...28,41 Rosco Precision Machinery...21,32 Rotarex...35 Royal products...24,33 Saw Services of WA...10,33 Selway Machine Tool Co...32,34 SigmaNest...432

Sustaining Edge...35 Swift Tool...3,31,32,34 Teton...42 ThinBit...2,32 TVT Die Casting...18,39 United Performance Metals...36 US Shop Tools...5,36 Valley Financial Services...

Von Ruden Manufacturing, Inc...33

Ethical Fast Cost effective Fun to deal with

Custom Extrusions Profiles, Tubing, Rods, Shapes FDA, U.L., NSF Cert.

inlineplasticsinc.com

Since 1996, Inline plastics, Inc. has been the cornerstone of the industry in custom plastic extrusions.

Our qualified staff has over 75 years of experience in the following areas: + Plastic extrusion die development + R & D and quality control + Custom plastic profiles Custom plastic shapes + Custom plastic tubing + Custom plastic rods + 20 different thermoplastics made to your exact specifications!

Keep The Faith Call Us Today: 909.923.1033

+ You are at the heart of all we do!

+ Assembly + Deburring + Drilling + Packaging to Customer’s Designs

Inline Plastics, Inc., 1950 So. Baker Ave., Ontario, CA 91761 Phone: 909.923.1033, Fax: 909.923.9913 Email: Info@InlinePlasticsInc.com

A2Z MANUFACTURING WEST COAST •

47 • JUNE - JULY ‘20

A2Z Manufacturing West Coast 1538 E. La Vieve Lane Tempe, AZ 85284

A2Z MANUFACTURING WEST COAST •

48 • JUNE - JULY ‘20

grovtecmachining.com 503-557-4689

AS

9100D

9001:2015