A2Z Manufacturing West Coast Edition Aug-Sept 2019

Vol. 9, No. 4 AUG / SEPT‘19 Front Cover Story Pages 24-25

West Coast Edition For WA, OR, & CA

Fahey Machinery Supports OSW Equipment With Large Precision Machinery To Fabricate the Largest Precision Dump Body and Precision Trailer Manufacturing On The West Coast.

A2Z MANUFACTURING WEST COAST •

1 • AUG - SEPT ‘19

888 - THINBIT • 888-THINFAX • THINBIT.COM

EXTERNAL FACE GROOVING

EXTERNAL GROOVING

SPECIAL TOOLING

BORING

DOVETAIL FACE GROOVING

FORM TOOLING

INTERNAL GROOVING

INTERNAL THREADING

INTERNAL FACE GROOVING

PROFILING

EXTERNAL GROOVING

ACME THREADING

Introducing THINBIT

®

FOR MILLLING • FASTER • MORE OPTIONS • LESS EXPENSIVE • LASTS LONGER

Swift Tool Co. Inc.

KENT 800-562-0900 KENT@SWIFTTOOL.COM SEATTLE 800-700-2801 SEATTLE@SWIFTTOOL.COM

Tool Presetting Devices increase PRODUCTIVITY! Precisely measured tools increase the quality of your work.

With EZset it’s easy to eliminate down time by presetting your tools while your machine continues to run!

• Tools precisely measured • Increase work quality and tool life • REDUCE down time and INCREASE PRODUCTIVITY

Prices starting from only

$9,999!

Choose the Image Controller that’s right for you

Many other options available, please ask for details.

Editor’s Corner If we make something, not just design it, are we strong vs. another country making it?

So why is precision manufacturing, especially manufacturing here in the U.S., so important?

Manufacturing helped build the United States. And, the need for domestic manufacturing, as opposed to importing, is becoming more apparent. Additionally, there is a higher sense of pride in “Made in the U.S.A.” products!

Manufacturing today remains a crucial industry for America! Not only does it increase employment, but it also boosts our country’s economy.

The manufacturing industry provides a wealth of opportunities for all individuals, both young and old, to develop their skills and become experts in their field, whether that is in design, engineering, fabrication, or machining.

CNC machining is leading the world in automated manufacturing; the machines can work continually and do not require a shut down. Only in the case of maintenance do these CNC machines need to be retooled, checked or calibrated, other wise they can maintain productivity for a long time without a break in precision production.

Production is based on more accurate, consistent processing, to tenths of thousandths, and CNC machines are, of course, programmable. These machines focus on every detail of production with great accuracy where there is little or no margin for error.These machines are so accurate that companies can make the same exact tool paths of a set of parts with literally no down side. And, with CNC machines you can produce tools and parts that are impossible to produce by manual methods consistently. CNC machines have helped minimize the gap in the USA where our labor costs are higher than in many other countries.

In short, having a strong domestic manufacturing base is vital to the United States and to maintaining its world leadership in innovation, productivity, and domestic product. That is because advanced manufacturing provides an important institutional foundation for learning and developing process skills and capabilities that are increasingly intertwined with many of the industries most important to the country’s economic future.

A study on future global competitiveness, by Deloitte Global and the U.S. Council on Competitiveness, predicts that the U.S. will dislodge China as the most competitive manufacturing nation of the world in 2020. To continue positive momentum, the U.S. will be heavily reliant on the manufacturing industry to grow its exports and continue to boost its position as an economic leader.

We are in an era of managing a growing domestic economy. Manufacturing companies must bring back foreign dollars into the U.S. economy in ways that reach the American consumer.

This can come in many forms, including further increasing capital in infrastructure investment, continued education for their workforce, and increasing wages through innovation, through precision manufacturing within our domestic mind set, and efforts to making products that are state of the art and better, faster, and higher precision, than our counter parts.

Manufacturing is strong in the U.S. It must be stronger to insure our position as the land of the free, the home of the brave, and a continued economic leader.

Cover

Story: 24-25 OSW Equipment Fabricating Precision Dump Body and Trailer Assemblies Announcements/Releases...................... 6-9 Feature Articles.................................1,24-25 Buyers Guide Equipment.....................40-46 Buyers Guide Processes.......................47-53 Card Gallery.........................................40-53 Index Of Advertisers................................54 Editorial................................... Throughout

Published by: A2Z Manufacturing West Coast PUBLISHERS/EDITORS Kim Carpenter & Linda Daly Kim@A2ZManufacturing.com

Mail Address: 1538 E. LaVieve Ln. Tempe AZ 85284 Telephone: (480) 773-3239

Website: www.A2ZManufacturing.com E-mail:Kim@A2ZManufacturing.com

CONTRIBUTORS

Linda Daly, Stephen Hannemann, Hugh Taylor, Eugene Wirth Published bi-monthly to keep precision manufacturers abreast of news, contracts, trends, and to supply a viable supplier source for the industry.

Circulation: A2Z Manufacturing West Coast maintains a master list of over 14,000 decision makers consisting of fortune 1000 companies, small manufacturing companies, engineering firms, DOD & Scientific Lab facilities, machine shops, fab-shops, and secondary source businesses. It has an estimated pass on readership of more than 25,000 people. The majority of our readers are based in CA, OR, WA area!

Advertising Rates have remained the same since 1999, deadlines and mechanical requirements furnished on our website at: www.a2zManufacturing.com.

All photos and copy become the property ofA2Z Manufacturing.

I want to thank you all for the great job you do and for making the US a wonderful place to call our home and nation to be proud of. Please continue to be innovative and make U.S. manufacturing great!

The Publisher assumes no responsibility for the contents of any advertisement, and all representations are those of the advertiser and not that of the publisher.

Please contact us about any manufacturing company you feel needs to be highlighted or written about. All of you are a great story to share in our magazine!

The Publisher is not liable to any advertiser for any misprints or errors not the fault of the publisher, and in such event, the limit of the publisher's liability shall only be the amount of the publishers charge for such advertising.

God Bless Our Troops!

A2Z MANUFACTURING WEST COAST

Kim Carpenter • 4 • AUG - SEPT ‘19

High Performance Innovation Open House Events October 9th and October 23rd, 2019

Bystronic and Landmark Solutions have partnered with customers to hold two Open House Events.

See first-hand how Bystronic 10kW and 12kW high-speed ByStar Fiber laser cutting machines, Xpert Series press brakes and Bystronic material handling automation systems are each driving high performance levels for sheet metal fabricators and creating a differentiation for their business.

Auburn, Washington Open House October 9th, 2019 • 11am – 5 pm

Sacramento, California Open House October 23rd, 2019 • 11am – 5 pm

(Refreshments and lunch provided)

(Refreshments and lunch provided)

Please RSVP by Wednesday, October 2, 2019 dan.feis@bystronic.com or call (213) 309-1692 chad@landmarksolutionscorp.com or call (714) 393-3783

Landmark Solutions | Irvine CA | 714-393-3783 | landmarksolutionscorp.com

Announcements & Releases Mazak Adds Automation to Multi-Tasking with the QUICK TURN 250MSY + GR100 To help manufacturers achieve the highest level of overall throughput, Mazak Corporation has designed its Kentucky-built QUICK TURN 200/250 Series of CNC turning centers as a flexible machine base suitable for numerous highly productive configurations. One such example, the QUICK TURN 250MSY Multi-Tasking Turning Center with GR100 Gantry Robot, offers full DONE IN ONE® partprocessing capabilities and fully automated part loading/unloading with the GR100 Gantry Robot for exceptional production efficiency.

Mazak pre-engineered the GR100 to easily integrate into any of the QUICK TURN 200/250 Series machine models, including the 2-axis, milling,Y-axis and/or second spindle versions. To interface with these QUICK TURN machines, the GR100 requires no special robot/ machine interface and programs easily via the MAZATROL SmoothG CNC featured on the machines. For application flexibility, two GR100 workpiece-table configurations are available, as is end-of-arm tooling with three-jaw grippers.

All GR100 robots come equipped with a simple-to-configure, D3, twosided, three-jaw gripping hand with a part range up to 7” in diameter, 6” in length and total weight of 44 lbs. The field-proven D3 hand design allows shops to load/unload a wide variety of chuck work. To A2Z MANUFACTURING WEST COAST •

6 • AUG - SEPT ‘19

significantly reduce machine idle time, Mazak complements the GR100 with the integration of a fast, servo-driven automatic door that allows the robot entry into the machine envelope at a 3,937 ipm rapid rate on the robot’s A axis and 7,087 ipm rapid rate on its B axis.

The QUICK TURN 250MSY headstock features a 10” main chuck mounted on a 35 hp, 4,000 rpm integrated spindle motor that generates 343 ft-lbs of torque for heavy-duty metal removal. To accurately position parts for square facing/slotting cuts and precisely drilled holes, the machine’s main turning spindle also serves as a fullfunctioning C-axis that is programmable in 0.0001-degree increments.

A second spindle with 15 hp, 6,000 rpm and a 6” chuck allows the QUICK TURN 250MSY to automatically transfer parts and perform secondary operations with speed and accuracy.

Ingersoll Rand® QX Series™ Ergonomic Tightening System (ETS) Ingersoll Rand® has released the QX Series™ Ergonomic Tightening System (ETS). The ETS delivers short pulses of energy into the fastener during tightening, so the operator safely retains control of the tool. The ergonomically enhanced motor control algorithm minimizes the average force experienced by the operator, protecting workers from injury. The Ergonomic Tightening System is available on the QX Series cordless fastening tools in pistol and right angle configurations that range from 1.6 to 80 Newton meters of torque.

Announcements Continued Manufacturers in motor vehicle, agricultural, heavy equipment, and general industries use Ingersoll Rand QX Series tools for the precise torque control and traceable results. Workers no longer have to manipulate the fastening tool and a stationary reaction device. ETS tools increase mobility and access for tasks requiring one-handed tool operation or when optimum operator agility is paramount.

Reducing the torque reaction during fastening doesn’t have to be complicated. The QX Series ETS offers four tightening modes to simplify the process. In addition to standard direct drive mode, each tool configuration can be independently programmed to utilize one of the three available single-parameter ETS modes, simplifying setup:

CONSISTENT, ACCURATE & REPEATABLE PARTS

TANKS

•Mode 1 – Ergonomic mode delivers the least amount of energy per pulse.

This mode is ideal for applications on hard joints or ones that require difficult arm, wrist or tool angles.

FOOD & BEVERAGE

COILS

HANDLES

BIKE RACKS

•Mode 2 – The Performance mode distributes moderate energy per pulse.

This mode is best for numerous all-purpose fastening applications.

•Mode 3 – Lastly, the Productivity mode delivers the most amount of energy per pulse.This mode is ideal for applications on soft joints or those that require high production rates.For more information about the QX Series™ by Ingersoll Rand visit www.IRTools.com/ETS.

HEAT EXCHANGERS

Updates To Albina’s Estimating Team!

For those of you who have not heard yet, Nathan Marker no longer works for Albina Co., Inc. July 23rd marked Nathan’s last day with the Albina team. Nathan and his family decided to leave the Portland metro area and move to beautiful central Oregon. Nathan will be missed and we wish him luck with his future endeavors. As we announced officially last month, Joe Daniels is Nathan’s replacement. Joe is excited to help you with any needs that you might have. .

CURVED STEEL AT THE BEAUTIFUL MADISON CENTER “GREAT ROOM” ROTUNDA IN SEATTLE, WASHINGTON The Madison Center is a 530-foot tall, 36 story high rise office building in Seattle, Washington and is featured in the June edition of Modern Steel. Albina Co., Inc. was the bender/roller on this project and worked specifically on what is being called “The Great Room” which is a 45-foot tall steel framed entryway rotunda. Albina bent many material types for this project including tube steel 8” x 6” up to 12” x 12”, 3” x 3” angle,W10 and W16 wide flange, 8” pipe and more.

ALBINA CO., INC. IS CELEBRATING 80 YEARS IN BUSINESS IN 2019!

CHEERS TO 80 YEARS! Estimating / Project Managers: Aaron Hughes: ahughes@albinaco.com Joe Daniels: jdaniels@albinaco.com Mark King: mking@albinaco.com Continued Page 8 PAGE 10

AUTOMOTIVE AGRICULTURAL ALTERNATIVE PARTS ENERGY PARTS

MARINE PARTS LOCOMOTIVE PARTS

AVIATION PARTS

AQUATIC PLAYGROUND HIGH PARTS EQUIPMENT PURITY CLICK HERE FOR COMPANY DIRECTORY! https:// www.albinaco.com/about/contact

(503) 692-6010

https://www.albinaco.com Located in Tualatin, Oregon A2Z MANUFACTURING WEST COAST •

7 • AUG - SEPT ‘19

SINCE 1979 BOB KROHA ROB KROHA 3305 Edison Way Fremont, CA 94538

PERMACH.COM sales@permach.com

PH: 510-249-1000 FX: 510-249-9265

Largest Inventory In Northern CA & NV New - Used - Service - Training -Financing - Applications

assistant. Being a quick study, his skillset expanded rapidly and he soon discovered he actually loved the work he was doing.

Time passed and eventually he moved on to maintaining and repairing industrial manufacturing machinery.

Sergio spends more time in the office than he once did as scheduling and supporting the service team requires a good deal of attention. When time allows you will often find him evaluating and preparing Fahey’s ever-changing inventory of new and used fabricating machines ensuring they are ready for their next owner. Still, on occasion Sergio can be found in the field assisting his team and filling in as needed.

Every service tech has a favorite machine to service or repair and for Sergio it just happens to be shears.

Originally from Lincoln Heights in Northeast Los Angeles, California Sergio moved to the Portland, Oregon metro area in 2014. He was accompanied by his lovely wife and children. He is a proud father of nine and loves spending time with family outdoors fishing, camping, and playing sports.

Showroom Open Monday - Friday From 8am To 5pm Announcements Continued

Fahey Machinery Service Manager Leading With Dedication and Passion For the past eight months Fahey Machinery Company’s Service Department has been led by Service Manager Sergio Maldonado and all agree he’s a great fit for this important position.

Sergio joined Fahey in October 2017 as a ServiceTechnician where his calm determination and leadership skills soon became apparent and management took notice.

Sergio got his start 10-15 years ago in the industry as a forklift mechanic A2Z MANUFACTURING WEST COAST

• 8 • AUG - SEPT ‘19

One of his favorite quotes; “People will sink the whole ship just because they can’t be the captain.”

Sergio is a skilled, sincere and supportive manager and we are glad he is part of Team Fahey.

For more information On the Fahey M a c h i n e r y Te a m , Products, and Services contact them at: 503-620-9031, office@faheyinc.com

Selway Machine Tool Company Celebrates Another Upcoming Westec Show The West Coast’s premier manufacturing solutions provider will be at booth 1857 during Westec at the Long Beach Convention Center.

Ontario, CA: Selway Machine Tool Co. is taking their showroom floor to Westec during the upcoming trade show on September 24 - 26. They will be featuring 5 CNC machines from Matsuura, Eurotech, Toyoda, and Hwacheon. For the first time at Westec, Selway will be showcasing the Trinity Robotic AX-3 Automated Pallet System. In addition to CNC Machines, Selway will be featuring displays from Fastems, C.R. Onsrud, HP, MakerBot, & Raptor Workholding.

“We are really excited about WESTEC this year,” stated Zack Selway, VP of Marketing & Sales at Selway. “We are going all out, bringing IMTS worthy technology to the Long Beach area. From 5-Axis Horizontal machining centers & twin spindle/dual turret multi-tasking lathes to automated robotics pallet systems & the latest in 3D printing & software, we’ve got it all.”

Announcements Continued Management System.

Matsuura LF-160: Matsuura’s 5-Axis LF-160 is a linear motor machine that was developed for ultra-precision machining dies, molds and optical parts. Featuring a 46,000RPM Spindle, 320Tool ATC, & 42 pallet changing system.

Eurotech Rapido: The Rapido is a Double Spindle, Dual Turret Turning Center, capable of delivering 3 tools in the cut simultaneously. One of the fastest turning centers on the market, it is built for machining complex parts in one set up.

Hwacheon C1 YSMC: The C1 is an integrated multiplex turning center with Tool Magazine & Y-Axis. It can completely manufacture parts in complicated shapes in a single chucking operation.

Toyoda FH 630 SXi 5-Axis: The FH630SX-i is a powerful, high-speed 5-Axis horizontal machining center.This machine has dual ballscrew drive on theY and Z axes, and a Meehanite cast iron base for improved rigidity.

The Selway booth will be featuring: Matsuura MX-330: The MX-330 is a compact, ergonomic, high speed 5-Axis Machining Center. Featuring a 20,000 RPM Maxia Spindle & 90 Tool ATC. This machine will be integrated with the Trinity AX-3 Pallet

Trinity Robotic AX-3:The AX-3 Automated Pallet Management System is designed to maximize the productivity of high mix, low volume complex parts. Integrated with the Matsuura MX-330 it combines High Speed

NEED LARGE MACHINING? WE CAN HANDLE IT

Multi Axis CNC Horizontal Milling 12'x66' Turning 15' D Boring Drilling Surface Finishing Gantry Mills Large Lathes

1-800-410-6789 (801) 732-2000 www.peterseninc.com

INDUSTRIES SERVED

ISO 9001:2015 AS9100-D

A2Z MANUFACTURING WEST COAST •

9 • AUG - SEPT ‘19

Our Mission is Your Production Edge Bar Feeders are an outstanding fusion of engineering, quality, and affordable prices. The Edge Army Marches On.

Landmark Solutions / Bystronic Announce Two Upcoming Open House Events

T

he Rebel 80 is an automatic bar loader for 8mm to 80mm bar capacities. Material can be round, hexagonal or shaped. Touch screen control with 300 part program storage speeds set-ups. Complete setup in 3 minutes with a full automatic adjust for bar diameter. The maximum bar length is up to 60” depending on spindle length.

This loader features a magazine capacity of 30 linear inches for lights-out unattended running. The Rebel automatically adjusts pusher force for bar size and has accurate positioning without a mechanical stop. It also features spindle liner storage on rear of the stand, and standard X axial shift device with Z optional. All electric operation, no shop air is required. Big on features, small on price.

Edge Rebel 80 Servo

Edge Rebel 80 Servo Unloader

T

he Rebel 80 Servo Unloader is a compact unloading system for CNC lathes for parts in the diameter range of 8-80mm. Parts are gently extracted from the subspindle of the lathe. With a large magazine capacity allowing for long unattended operation, the Rebel combines the advantages of auto part unloading with a small footprint and an economical price.

T

he Scout 320 is a fine example of Edge Bar feeder Economic Excellence. With a bar capacity of 3-27mm, it features: an automatic loading magazine, space-saving double pusher, quick change hydrodynamic guide channels, and dual anti-vibration devices. Also offered as standard equipment: Swiss headstock synchronization device, telescoping front nose, automatic remnant retraction with a self centering gripper, and a custom lathe cable.

Edge Scout 320

T

he Minuteman 320 is the best value in 3-20mm bar fed applications for Swiss lathes, a brilliant combination of features with an economic price. With a bar capacity of 3-27mm it features: an automatic loading magazine, space-saving double pusher, polyurethane quick change channels with hydrodynamic support via high volume oil flow into channels, and features dual anti-vibration devices. Standard equipment includes: Swiss headstock synchronization device, telescoping front nose, automatic remnant retraction with a self-centering gripper, and a custom lathe cable. The Mitsubishi motion control is dependable and user friendly. The Minuteman is a sure thing for a high quality, affordable, feeding solution.

Edge Minuteman 320 SE

T

he Patriot 338 and 551 are two of the most effective and price worthy to claim our Economical Excellence moniker. With a bar capacity of 3-38mm or 5-51mm they both feature space-saving double pushers, polyurethane quick change channels with hydrodynamic bar support via high volume oil flow into channels. The Mitsubishi motion control is dependable, user friendly, and features a 36 part program memory storage for quick changeovers. Standard equipment also includes: Swiss headstock synchronization device, telescoping front nose, dual anti-vibration devices, automatic remnant retraction with a self-centering gripper, and a custom lathe cable. The Patriot is a lot of feeder for a little money.

Edge Patriot 338

VISIT US IN BOOTH# 1348

Visit us at EASTEC May 14-16 in West Springfield, MA in Booth #1348 or visit us at www.edgetechnologies.com and get more information on how your Productivity Partner can help your bottom line.

Bar Feeding. It’s What We Do. Contact Us. Get a Battle Plan for Lights Out Production!

call or click: 314.692.8388 www.edgetechnologies.com James Peterson 951.440.1574 jpeterson@edgetechnologies.com

11600 ADIE ROAD MARYLAND HEIGHTS, MO 63043 314.692.8388 f 314.692.5152 www.edgetechnologies.com

Announcements Continued

A2Z Mtlwkr WEST Coast Peterson EASTEC 2019.indd 1

4/9/2019 3:51:54 PM

5-Axis Machining with Controlled Repeatability of Robotic Automation, resulting in unmanned run time, decrease set up time via stored workholding, & eliminates idle time between part loads.

Selway MachineTool Company has been serving the manufacturing community of theWest Coast United States for over 55 years. At Selway, we don’t believe in just selling our customers a piece of equipment or a seat of software and walking away. Our award-winning sales team will work with you to find the best complete solution for your unique manufacturing needs. Whether you’re making one off complex prototypes or high volume intricate parts that require automation, process verification, and on machine training, we got you covered.

Interested in learning more about Selway or Westec? Email information@selwaytool. com. Selway Machine Tool Co. is offering free entrance to Westec with promo code 10529251.

selwaytool.com | 888-735-9290

A2Z MANUFACTURING WEST COAST •

10 • AUG - SEPT ‘19

Landmark Solutions and Bystronic are pleased to announce that they will be hosting 2 Open House events during October. The first Open House will be held on October 9th in Seattle, and the 2nd will be held in Sacramento on October 23rd.

Fred R. Mooneyham, President of Landmark Solutions Corp., says, “The events will highlight the NEW 10K/12K Fiber Laser technology from Bystronic. Also in action will be the full automation systems and state of the art Press Brake technology. We hope to see many of our current and prospective customers at one of these events.”

Landmark Solutions is the largest Western US Fabricating equipment dealer and the exclusive distributor for Bystronic products.

To learn more about the 2 events or to register, you can visit landmarksolutionscorp.com. You can also contact Chad Mooneyham directly at chad@landmarksolutionscorp. com or call: 714.393.3783.

A2Z MANUFACTURING WEST COAST •

11 • AUG - SEPT ‘19

Oregon Reaches 10,000 People In Apprenticeships With New Programs, Diversity

TVT DIE CASTING Precision aluminum and zinc die casting, machining and finishing.

Quality, Reliability and Service

The number of people in Oregon’s state-registered apprenticeship programs has more than doubled over the past six years, coming to more than 10,000 people enrolled this June.

In 2013, the state had just over 4,600 total apprentices, according to a news release from the Bureau of Labor and Industries.The increase in the amount of people participating in these hands-on programs is largely attributed to a boom in demand for construction workers and the expansion of apprenticeships into industries like information technology and healthcare.

“Apprenticeships have traditionally been in the building and construction trades but we’re trying to diversify and one of the things that we started is just looking at other industries ... in IT and healthcare, (and) reaching out to other manufacturers,” Hubbard said.

We are a full service job shop, providing as much or as little project involvement as required – from tool and die design to finishing and assembly.

tvtdiecast.com

▼

800 280 2278

ISO 9001:2008 Certified

“There are a lot of people who are getting older in the construction industry and we need to replace that workforce and prepare for all these new jobs,” he said. “So we’re trying to look in different places and diversify our apprentice workforce — our construction workforce — so we’re trying to increase our percentage of minority and women apprentices as well.”

“As a workforce board we’re putting out all different types of opportunities, making sure youth as they’re leaving high school know what their opportunities are, and adults as well who may be returning to school,” said Executive Director Kristina Payne.

Apprenticeships are for adults of all ages, because the majority of apprenticeships require you to be at least 18 years old, Hubbard said, but there is no maximum age cutoff.

GMA GARNET GROUP

Lane Workforce worked recently to jump start a pilot program for apprenticeships in information technology.

when your abrasive matters!

“For the tech industry, in a number of job positions they were having a difficult time finding qualified people,” Payne said.

Being one of the few technology apprenticeship programs in Oregon, the needs and qualities that best suit it are still being worked out.

“When we look at this apprenticeship for technology, we’re not sure in its purest form if that’s what the industry needed,” Payne said. “We’re still evaluating that.”

PANTONE Process Black PC R:35 G:31 B:32 C:70 M:67 Y:64 K:74

50% PANTONE Process Black PC R:145 G:143 B:143 C:45 M:38 Y:38 K:3

30% PANTONE Process Black PC R:189 G:188 B:188 C:26 M:21 Y:22 K:0

PANTONE 364 PC R:43 G:117 B:58 C:84 M:31 Y:100 K:19

PANTONE Yellow PC R:255 G:238 B:0 C:3 M:0 Y:96 K:0

This new technology program, along with expanded apprenticeship programs in healthcare and manufacturing, are created to fill a need in different sectors of the workforce. These new programs have added 450 new apprentices over the last two years, according to the release.

“It really is hands-on learning,” Payne said. “It has classroom aspects to it ... but you’re applying what you’re learning. And I think for a lot of people that practical hands-on exploration makes a huge difference in how they’re grasping concepts. By: Jordyn Brown

A2Z MANUFACTURING WEST COAST •

Z Mfg.1/4 pg.3.2015.OUTLINES.indd 1

12 • AUG - SEPT ‘19 3/23/15 6:33 AM

TECHNOLOGY WITH COMMITMENT

Offering The Best!

Bar-Lathe and Swiss-Style CNC Machines CITIZEN - Miyano & Cincom

For More Information on Spinetti Machinery info@spinettimachinery.com 775-996-3770 ®

Tooling Designed & Manufactured Specifically For Your Swiss-Style CNC Machine

Micro Turning - Rotary Broaching - Live Tooling & More www.genswiss.com A2Z MANUFACTURING WEST COAST

• 13 • AUG - SEPT ‘19

718 625 188 A-286 X-750 15-5 17-7 Hast X HS25/L605 HS 230 Multimet/N155 Rene 41 6-4, 6-2-4-2 CP Titanium Waspaloy

Call Today: 800-227-8103, 714-279-0249 www.altempalloys.com info@altempalloys.com

Special Processes: • • • • • • •

Shearing Waterjet Cutting Plasma Cutting Heat Treating Ultrasonic Testing Forgings And much more!

A STOCKING PROVIDER Of HIGH TEMPERATURE ALLOYS Call Our Team Today!

714-279-0249, 800-227-8103 www.altempalloys.com

Who Is Responsible For The Future Of Space Exploration?

Apollo inspired generations, including people who are now the explorers working to take us back to the Moon, on to Mars and beyond. They are designing vehicles, planning for challenges and charting major milestones. Their work is taking space exploration to new heights. But who will actually put new footprints on the Moon and take the first step on Mars? Who will take us beyond that goal? Who is responsible for the future of space exploration?

Students. Today’s students are that future—and it is our job to inspire them and help them see themselves as those leaders.

A2Z MANUFACTURING WEST COAST

• 14 • AUG - SEPT ‘19

At the Challenger Center, we inspire more than 250,000 students from around the globe every year. They are transported to space when they come to our centers.They become science, technology, engineering, and math (STEM) professionals leading futuristic missions. During one simulation called Expedition Mars, we set the stage by telling the students a handful of facilities are established on Mars and that a shuttle ferries them between a base on the moon Phobos and the Martian surface. To these students, this is not hard to imagine. It is not a dreamworld or something from a storybook. Setting foot on Mars, going back to the Moon and exploring beyond is not just an idea; it is their reality.

Over the last 30 years, more than 5 million students have participated in the Challenger Center’s virtual space missions. Credit: Challenger Center Today’s students have a “no limits, anything is possible” mindset—the type needed for space exploration.They have an indomitable spirit and are less risk-averse than any previous generation. While adults talk about technology as a thing, students simply experience it as part of their lives.They are digital natives who expect technology to expand and evolve. Students are growing up in a world with experiences that would have been impossible a decade ago—and unimaginable before that.This mindset and adaptability are traits that could transform the space industry in the next 20, 30 or 40 years. It is our role to help equip students with the necessary skills and provide inspirational experiences that lead them down the path to pursue STEM careers.

Complex issues such as space exploration require communication and collaboration skills. Every industry, especially the space industry, needs talented individuals who can work together on a unified goal. But how do we show today’s students the importance of these 21st-century skills? How do we prepare them to be collaborative problem solvers? At the Challenger Center, we provide visiting students with an experience that demands those qualities, and without hesitation the students work together to

complete tasks and reach their goals. If you put them in a situation where these skills are required, they understand why it is important and witness positive effects as a result.

The Challenger Center has sent more than 5 million students on virtual space missions over the last 30 years. We give students around the world the chance to play a part in reaching a collective goal, to feel the anxiety of the risks, understand the impact of their decisions and enjoy the satisfaction of success.

I know this happens because I’ve seen it happen. I’ve watched students arrive uninterested and disengaged, silent and intimidated. When they realize their classmates are counting on them, I see a shift. They work hard to complete their tasks and help their teammates. When the mission is complete, they high-five their teachers before walking out the door with confidence and a can-do attitude. I know these moments happen because I hear from former students who are now young professionals working on incredible programs such as Lockheed Martin’s Orion and Blue Origin’s Blue Moon.

Space exploration, by virtue of its visionary perspectives and necessarily lengthy project timelines, is one of the few ventures that so heavily relies on the next generation. Knowing this also means understanding how critical it is to have a talented and motivated future workforce.

From volunteering and mentoring to supporting STEM programs, I challenge everyone in the space community to consider how, in your own way, you can inspire the next generation. Today’s students have the mindset to transform the future of space exploration into something we cannot even imagine. Let’s be role models and work together to inspire them to take on that challenge, just as Apollo inspired us.

Lance Bush is president and CEO of the Challenger Center, a nonprofit formed by the families of the crewmembers who perished when the space shuttle Challenger broke apart.

US Manufacturing Output Hits All-Time High The latest Bureau of Economic Analysis data find that U.S. manufacturers produced $2.3852 trillion worth of goods in the first quarter of 2019, up from $2.3845 trillion in the fourth quarter of 2018. This production number represents an all-time high. Manufacturing accounted for 11.3 percent of real GDP in the first quarter of 2019—and the industry continues to have the largest economic multiplier of any major sector.

The industry’s continued success has created many new jobs as well. Manufacturing job openings were at an all-time high in May with 509,000 open jobs, according to the Bureau of Labor Statistics’ Job Openings and Labor Turnover Survey. This job creation is actually exacerbating an existing challenge in the industry: a lack of enough skilled workers.

Manufacturers could have 2.4 million unfilled jobs by 2028, according to industry experts. The NAM and The Manufacturing Institute recently launched a $10 million Creators Wanted campaign, which plans to fill 600,000 manufacturing jobs by 2025. Source: Assembly Magazine A2Z MANUFACTURING WEST COAST

• 15 • AUG - SEPT ‘19

YOUR WESTERN SOURCE FOR HIGH PERFORMANCE METALS SHEET, COIL, & BAR GRADES • 15-5 PH • 316/316L • Alloy X • 17-4 PH • 321 • A286 • 17-7 PH • 347 • CCM • 410 • 301 • CP Grade 2 • 301-1/4 • 625 • CP Grade 3 • 301-1/2 • 718 • CP Grade 4 • 301 FH • Ti-6AL-4V • Waspaloy®5708 • 304/304L

STAINLESS STEEL PLATE • 17-4 PH • 303 • 304P/304LP • 316P/316LP

• 317L/LM/LMN • 410 • 416 • 440C

ALUMINUM PLATE • 6061 • Mic 6®

L O C AT E D R I G H T I N YO U R B AC K YA R D NORTHERN CALIFORNIA-OAKLAND P 707.745.4625 | F 707.745.4627 saplate@upmet.com

Semiconductor Supplier Plans $100M Facility In Hillsboro Semiconductor supplier JSR Micro Inc. is building a $100 million materials manufacturing facility not far from its existing Beaverton research and development site.

The new operation will be in Hillsboro, where the company recently purchased property, and should be running next year, the company said in a statement.

The 25.6-acre property, at 5950 N.E. Starr Blvd., sits in North Hillsboro within the Hillsboro Technology Park. JSR paid $7.1 million for the land in a deal that closed in May, according to Patrick Preston, public affairs manager for the city of Hillsboro.

The company, based in Sunnyvale, Calif., is part of Japan-based JSR Corp. It makes chemicals and materials used in the semiconductor industry, as well as plastics and life sciences industries.

Here in Oregon, the company has an R&D team working on lithography and patterning for the semiconductor industry, according to job postings on the company’s website.

The company said the new facility will have quality assurance and control, engineering and advanced process control capabilities. It did not indicate how many employees would be needed to staff it. News of the new facility was first reported by the Oregonian.

SOUTHERN CALIFORNIA-LOS ANGELES P 888.282.3292 | F 714.736.9835 sales@upmet.com

between the different manufacturing steps in the lithography and etching processes.These chemicals are needed to reduce defects in manufacturing.

This is a new business line for the company, he told the publication.“We’re always focused on our quality, our customers and the performance of our materials,” said Slezak in a written statement. “State of the art integration schemes have led to significant challenges for our customer in the area of defectivity reduction, which is why JSR is committed to investing in the area of advanced cleans.”

Construction of the new facility also provides options for any “future strategic expansion.”

Intel has been working closely with suppliers as it rolls out a long-delayed next generation of 10-nanometer chips. The company has said 10nm delays have been tied to manufacturing challenges and it has been most recently working through lowering the defect rate of chips before rolling them out in high volume to customers.The 10nm chips are now making their way into the market.

Intel is one of Oregon’s largest private employers with more than 20,000 employees across four campuses inWashington County. The company has noted its large employee base extends beyond its own workers. A 2012 economic impact study showed that for every Intel employee 3.1 jobs are created statewide.

Placement of the facility in Hillsboro may indicate a close relationship with chipmaker Intel, which has its most advanced manufacturing facility at the Ronler Acres campus — also in Hillsboro.That Intel facility is currently being expanded.

JSR Micro isn’t the only Hillsboro semiconductor supplier that is positioning for growth. Dutch manufacturer ASML has seen its Oregon workforce expand to 600 people in the last three years and it expects to double in size in the next five years.

In a July interview with industry publication Chemical and Engineering News, JSR Micro president Mark Slezak said the new facility will add capabilities known as “advanced cleans,” which are advanced chemicals used to clean silicon wafers

ASML supplies huge equipment used in photolithography for chip manufacturing. By Malia Spencer, Portland Business Journal

A2Z MANUFACTURING WEST COAST •

16 • AUG - SEPT ‘19

ŽŶƚĂĐƚ /ŶĨŽƌŵĂƚŝŽŶ͗ ϭϳϲϬϱ ^t ϲϱdŚ ǀĞŶƵĞ >ĂŬĞ KƐǁĞŐŽ͕ KƌĞŐŽŶ ϵϳϬϯϱ

;ϱϬϯͿ ϲϮϬͲϵϬϯϭ ŽĨĨŝĐĞΛĨĂŚĞLJŝŶĐ͘ĐŽŵ ǁǁǁ͘ĨĂŚĞLJŝŶĐ͘ĐŽŵ A2Z MANUFACTURING WEST COAST •

17 • AUG - SEPT ‘19

Boeing Awarded Up To $55.5M For Redesign Work On KC-46 Tanker Boeing has been awarded up to $55.5 million from the Air Force for redesign work needed on the refueling boom for the KC-46A Pegasus tanker.

According to a notice of the award posted last month, the funds will be for “system level hardware and software critical design review of the boom telescope actuator redesign.”

Problems with the boom were among the issues that the Air Force and Boeing (NYSE: BA) knew needed to be resolved at the time the tankers first began being delivered early this year.

According to a report from the Government Accountability Office in June, the Air Force expects to spend more than $300 million over the next three or four years on the redesign requirement and to retrofit the aircraft delivered by that point.

A2Z MANUFACTURING WEST COAST •

18 • AUG - SEPT ‘19

But Boeing is footing the bill for other work, including related to fixes needed for the RemoteVision System used to guide the boom on the new tanker.The Air Force is withholding as much as 20 percent from the final payment on each tanker until those improvements are made.

Boeing has incurred more than $3.6 billion in cost overruns amid delays and technical and production issues on the program.The first 18 KC-46 jets were supposed to have been certified and delivered to the Air Force

by August 2017.

The first didn’t arrive at McConnell Air Force Base inWichita until January of this year. Deliveries have been stopped twice since then due to debris left behind on the aircraft from the manufacturing process at Boeing.

McConnell is the main operating base for the tanker and will eventually be home to 36 of the aircraft.

Boeing intends to build 179 of the KC-46 tankers for the Air Force. By Daniel McCoy – Reporter, Wichita Business Journal

Washington State Is The Most Attractive Place For Aerospace Companies Washington state remains the most attractive place in the U.S. for an aerospace business, a new report by PriceWaterhouse Coopers says.

infrastructure, and economy.

The 2019 rankings by the global management consulting firm’s aerospace practice says Washington won favorable scores in ratings categories that included industry,

With a total aerospace workforce of more than 136,000 people, the state produced 1,400 aircraft and unmanned aerial systems in 2018, PwC said.

Many of those were Boeing jets, including the 737, 787 Dreamliner, the bigger 777-300 Extended Range widebody and 767 and 747 Freighter jets.

Georgia, the home to Delta Air Lines, ranked second, followed by California, Michigan, and Illinois, and Indiana in the PwC report.

Washington state’s aerospace ecosystem includes not only major players like Boeing Commercial Airplanes (BCA), but also its supply chain of companies, as well as space rocket maker Blue Origin and emerging players small satellite space players, including Spaceflight Industries.

The report said Boeing set an industry record in 2018 for delivering

806 commercial airplanes and racking up $101 billion in revenue, while reportedly hiring 8,500 workers.

In order to promote innovation, the state offers favorable tax policies, such as tax credits for pre-production development expenditures, and support for several public-private partnerships.

The latest PwC report is its sixth annual ranking aerospace manufacturing attractiveness rankings by countries (or regions) and states in the US. The firm says its rankings are designed to help aerospace companies plan for future growth, enhance their manufacturing supply chains, or examine costs where their operations are now located.

A second report also released this week offered a different perspective of manufacturing in Washington state.

Ball State University’s Center for Business and Economic Research in Muncie, Indiana, awarded Washington state a “C-” for manufacturing and “C” for logistics. Washington, however, retained its “A” grade in a category called human capital and diversification.The state was given a “B” in the productivity and innovation categories.

Ball State — which awarded its home state of Indiana an overall “A” grade — also gave Washington state a “C” in the tax climate category and an “F” for costs of workers’ benefits. By Andrew McIntosh A2Z MANUFACTURING WEST COAST •

19 • AUG - SEPT ‘19

July represented the second straight month of strong manufacturing job expansion following slow growth during the first part of 2019.

Manufacturing added a revised 12,000 jobs in June.

In July, durable goods overall posted a gain of 12,000 jobs. Other industries with employment increases included computers and electronic products, up 2,600, and furniture, up 2,000.

The main job loser in durable goods was machinery, down 3,600.

Even with the strong numbers for July, job growth in manufacturing lags 2018’s pace.

Manufacturing added 55,000 jobs for the first seven months of 2019, compared with 162,000 for the same period last year.

Manufacturing totaled 12.864 million in July on a seasonally adjusted basis. That’s up from an adjusted 12.848 million in June and 12.707 million in July 2018.

Jobless Rate

Announcements & Releases Continued Manufacturing Adds 16,000 Jobs, Paced

by Motor Vehicles Manufacturing added 16,000 jobs in July with makers of motor vehicles and parts leading the way.

The vehicle sector boosted employment by 7,200 jobs, according to a breakdown by industry sector released this morning by the U.S. Bureau of Labor Statistics. That was part of an overall job gain of 9,500 jobs in transportation equipment.

The job surge comes amid softening U.S. deliveries of cars and light trucks.The industry recorded four consecutive years with sales of 17 million or more. The vehicle market also is restructuring, with demand for trucks, SUVs and crossovers remaining relatively high while sales of sedans plunge.

A Z MANUFACTURING SW • 20 • March / Apr2018 2

A2Z MANUFACTURING WEST COAST • 20 • AUG - SEPT ‘19

Total non-farm employment rose by 164,000 in July, the bureau said in a statement.

That was near forecasts by economists. The unemployment rate remained unchanged at 3.7 percent, near a 50-year low.

Manufacturing jobs peaked in June 1979 (19.6 million on a seasonally adjusted basis, 19.7 million unadjusted). That sank to a low of 11.45 million adjusted and 11.34 million unadjusted in February 2010 following a severe recession caused by the 2008 financial crisis.

Since that low, new manufacturing jobs have been created requiring increased skills because of increased automation and technology in Announcements Continued Page 22 factories.

by Bill Koenig,

#DiscoverMoreWithMazak

OUR WORKDAY DOESN’T END WITH A SHIFT.

Visit us September 24-26 at

Booth #1031

“A lot is riding on us. Our systems must not fail. Their perfect performance depends on us producing strong, high quality and

Hardrock Machine Shop Team

DISCOVER MORE WITH MAZAK

precise parts. Each component presents some real challenges when it comes to machining. But our Mazaks handle it with no problem.”

– TRAVIS PARR, DIRECTOR OF RESEARCH & DEVELOPMENT, HARDROCK MACHINE SHOP

MazakUSA.com | (859) 342-1700

Siemens Wins $100M Trimet Contract For Light Rail Cars

Transit systems in San Diego and Portland, Oregon, are completing transitions to low-floor light rail systems by buying over $200 million of cars from Siemens Mobility’s Sacramento train factory.

The additional sales will continue workflow for years at the factory on French Road in South Sacramento, where more than 1,500 people build locomotives and light and heavy rail cars.

These orders are in addition to nearly $1.6 billion in orders announced in December for heavy rail locomotives and cars from Amtrak and the Canadian rail service.

San Diego’s Metropolitan Transit System awarded Siemens Mobility a contract for 25 of its S700 low-floor light rail cars. Portland’s TriMet transit system has ordered 26 of the same S700 vehicle, configured to TriMet standards.

Siemens spokeswoman Elizabeth Cho said the Portland contract is “over $100 million” and the San Diego contract is just “under $100 million.”

The Portland contract has an option for up to 60 more vehicles.

In both cases, the transit systems are transitioning away from highfloor to low-floor cars. The low-floor cars are more easily accessible to passengers in wheelchairs, without the need for ramps at stations.

The S700 cars also feature wide aisles, making them easier to traverse with wheelchairs and bicycles, Cho said.

Siemens Mobility provides rail vehicles, locomotives, components and systems to more than 25 agencies in cities including Washington D.C.; New York; Boston; Chicago; Phoenix; Seattle; Miami; Philadelphia; Denver; Baltimore; Salt Lake City; Minneapolis; Houston; Portland; Orlando, Florida; Sacramento; San Diego; St. Louis; Atlanta; and Charlotte, North Carolina.

A2Z MANUFACTURING WEST COAST •

22 • AUG - SEPT ‘19

Siemens Mobility is the Sacramento region’s third-largest manufacturing company. By Mark Anderson – Staff Writer, Sacramento Business Journal

Your partner for innovative manufacturing

ASSESS OUTCOMES

CONTROL PROCESSES

Layers of control build upon one another—driving out variation from the machining process.

SET UP EQUIPMENT

CHECK PERFORMANCE

As manufacturers ourselves, we understand the challenges you face. For 45 years, Renishaw has been creating breakthrough innovations that solve manufacturing problems and move productivity to new heights. Our suite of advanced solutions allows aerospace manufacturers to work to ever-tighter tolerances and significantly improve throughput. From additive manufacturing to post-process control, our proven technologies are found at the forefront of intelligent production systems.

Revo 5-axis measurement system All-in-one, high-performance measurement flexibility on a single CMM

Allow us to show you how the integration of innovative manufacturing techniques improve overall productivity and how we can be your partner for innovative manufacturing.

www.renishaw.com/aerospace

Renishaw Inc 1001 Wesemann Drive West Dundee, IL, 60118 T 847-286-9953 F 847-286-9974 E usa@renishaw.com

www.renishaw.com

A2Z MANUFACTURING WEST COAST •

23 • AUG - SEPT ‘19

OSW Equipment Utilizing State of The Art Equipment and Software to Build the Best Equipment

“Bringing processes in house is key to our growth here at OSW,” “We design our products with the latest in engineering software to our customers’ exact specifications. What is important to one company is not the case with another company.” “At OSW we offer complete customer satisfaction through listening and talking with our customers and asking them, what would make the operation of this vehicle better, safer, and more productive?”

The new OSW Equipment manufacturing facility allows the OSW team to focus on higher end products.

The truck and trailer products OSW creates and manufacturers stay in the field longer and have a longer running history as durability is manufactured into the product instead of after market product welded on the existing truck as a patch or a quick add on.

OSW Equipment started as a small manufacturing company in 2000, and today it is one of the largest dump body and trailer manufacturers along the West Coast.The company hails from Snohomish, Washington and continues to grow its business with cutting edge technologies, state of the art fabrication machines, and by controlling its own destiny, through controlling it’s processes, in house.

These trucks, dumps and trailers are massive, yet they have to utilize very precise manufacturing equipment, the size of dinosaurs. To give a perspective, a standard press brake that bends metal is normally 6 feet in length. To bend and fabricate very large truck parts OSW had to enlist the help of the experts in metal bending, Fahey Machinery. After consulting with Fahey Machinery, OSW agreed on the very large Accurpress 5150024, a 1500 ton press brake that bends 24 foot pieces of metal.

Bending very large pieces of heavy metal requires work holding machinery and tooling to lift, hold and maneuver the metal while in the jaws of the press brake. It takes two people to hold and fabricate the metal while it is suspended by overhead cranes. This cutting, bending, and welding during the fabrication process used to be performed by fabrication suppliers outside of the OSW business model.

The progression for OSW to cut, form and fabricate their material to their own specifications has streamlined their business so much that they are able to stop what they are doing and turn on a dime to fabricate an order that may come in on a rush basis. The response time and order minimums have been reestablished in their own hands.What used to take months to receive in from their suppliers and what used to take a minimum order of 5 to 10 units can now be one or ten and it takes weeks instead of months. This affords better response time for OSW customers, and much higher quality, as the OSW team manages every detail of the fabrication operation. With 2 sixty-foot paint booths, OSW can not only design, cut, weld, grind, assemble, and test, they can paint a body in 1 to 5 hours complete. OSW used to outsource some fabrication and painting and now as OSW tells it, “ We no longer farm out anything, no cutting, fabrication and zero paint, we are in complete control of the entire process. This helps us maintain very high quality, and keeps us in charge of our destiny, and continued success.”

A2Z MANUFACTURING WEST COAST •

24 • AUG - SEPT ‘19

The larger fleets look to OSW to support products for the entire fleet with state of the art truck modifications and products that meet their very demanding requirements and standards. OSW meets with their customers on a regular basis to discuss ways to haul larger payloads, improving the product, and listening to the drivers that utilize the vehicles 8 to 10 hours every day to help improve their experience with the product.

OSW Buys Western Truck Body The acquisition of Western Truck Body of Canada in 2019 expands the geographic footprint of OSW into Western Canada and allows OSW to continue to expand its product line with theWTB aluminum service bodies. Western Truck Body is located in Edmonton,

AB and manufactures an all aluminum service body, lube bodies, and a slip in mechanic body for a pick-up. An all aluminum body is extremely durable, corrosion resistant, and helps improve fuel economy.The high qualityWTB truck bodies makes the Western Truck Body acquisition again another strategic step in building OSW’s strength, product brand width, and customers options.

OSW Equipment Buys Northend Truck Equipment The acquisition of Northend Truck Equipment

by OSW Equipment & Repair LLC is another strategic step in building the company’s strength, product brand width, and customer options.The acquisition allowed OSW Equipment & Repair, into another niche in the work truck body industry.

The Northend Truck acquisition expands OSW’s manufacturing and up fitting capabilities while also expanding its presence in new end user markets.

Northend Truck Equipment, based in Marysville, WA, is a custom manufacturer and equipment up fitter of dump trucks, service trucks, snow plows and cranes for end users in the Pacific Northwest.

Over its thirty-five year history NTE grew to become the one of the largest companies in the Northwest in its specialized area.

OSW Becomes a Hardox® Cerified Supplier A big part of OSW’s secret recipe is the HARDOX® 450 material.The material is as hard as its name and OSW realized to make the best dump products theirs had to be the best made, the toughest, and built to exacting specifications. The HARDOX® 450 is an abrasion resistant steel with a nominal hardness of 450 HBW. This is about a 47 Rockwell with an ultimate tensile strength of over 230 ksi, that’s some very tough material.This armor like material is a pliable or formable type of material and allows the OSW manufacturing, bending, and fabrication facility to make some of the toughest most resilient dump trucks and commercial application trucks in the world. OSW is one of few in the Western US to be a certified HARDOX® supplier and certified fabrication company.

OSW Engineering a Better Way For Their Customers OSW has implemented many new special processes and has continued to build a great organization, building mid level management, fabrication, welding, specialized painting, and assembly as a 21-century manufacturing partner. Customers look to OSW to give them what no other company can, exactly what they want, the way they want it, down to the color they want it.This exact engineering has to do with asking what the customer wants, then formulating it. OSW utilizes SOLIDWORKS®, software in their engineering for customer satisfaction. SOLIDWORKS®, has a broad platform so that drawing the equipment, testing the equipment, and building a sound model of the equipment makes it a reality and the end result another customer is completely satisfied with a quality truck body or trailer.

Where Do We See OSW in 5 years?

OSW will be the largest, most complete product line truck body and trailer manufacturer in the western region of North America for the construction, energy, municipal, and mining industries. The engineering we mentioned is a part of how OSW intends to grow the business.The future is a prophecy with the influx of automation, faster and higher power software, stronger yet more formable materials, robotic welding.

These processes make the most of the allotted time, they are precision or exact in tolerance and dimensions, and the product has little or no error, thus the finished product is superior and an OSW niche is created.

OSW maintains close relationships with their suppliers as well as their customers. OSW said, “Our partners have to be the best if we intend to continue to be the best in our field and one of our key suppliers is Fahey Machinery. Fahey has done a great job over the years keeping us informed as to what the best fabrication equipment is and showing us how it can work to the best of our large type of manufacturing and our advantage. Fahey is similar to us, they ask how can we do better, we tell them, and they deliver a solution. Sometimes the solution is one that not many have and has to be tweaked to our exact specifications. Fahey has stood up and been there to keep us up and running with equipment that helps us maintain our standards of manufacturing.The bending and cutting equipment we have now is state of the art and not too many companies have them or know how to use them to their full capability. Fahey makes sure we have training and accessories that help us stay at the cutting edge of our industry.”

For more information on OSW Equipment contact them at: 425 483-9863, www.oswequipment.com For more information on Fahey Machinery contact them at: 503-620-9031, www.faheyinc.com A2Z MANUFACTURING WEST COAST •

25 • AUG - SEPT ‘19

A2Z MANUFACTURING WEST COAST •

26 • AUG - SEPT ‘19

Department of Education Marks the Beginning of Perkins V by Approving Every State’s Transition Plan With the Strengthening Career and Technical Education for the 21st Century Act (Perkins V) taking effect on July 1, the Department of Education announced it “received, reviewed, and approved every state’s Perkins V one-year transition plan.” In 2018, One Voice and its members lobbied Congress extensively on passing the law, marking a rare bipartisan victory during an election year. The bill provides $1.2 billion in federal funding for career and technical education (CTE) initiatives, including $160 million in apprenticeship opportunities. With the approval of their transition plans, states now must work on full four-year Perkins V implementation plans, which are due in April 2020.

Precision Swiss Turning & Production Screw Machining

Volkswagen Investing $2.6B In Argo SelfDriving Car Program Volkswagen said that it will invest $2.6 billion in Ford Motor Co.’s selfdriving Argo AI auto unit.

The German automaker said it will invest $1 billion and will contribute its $1.6 billion Autonomous Intelligent Driving (AID) company to Ford’s Pittsburgh-based Argo AI unit, which is now valued at $7 billion and has Bay Area operations in Mountain View and San Francisco.

VW recently ended a partnership with Palo Alto-based self-driving startup Aurora Innovation .

9001:2015

AS

9100D

info@grovtecmachining.com — 503.557.4689 in Europe and in the U.S. “This improves the positions of both companies through greater capital efficiency, further growth and improved competitiveness,” said VW CEO Herbert Diess, in a Volkswagen statement.

The companies said Argo AI’s self-driving system will first be deployed in commercial vehicles in Europe and the U.S. They said Argo AI is concentrating on a selfdriving system that will be used for ride sharing and goods delivery services in dense urban areas.

Ford and VW will now have an even stake in Argo AI, with Argo AI employees also having a stake in the company. Ford invested $1 billion in Argo AI in 2017.

Ford said it will useVolkswagen’s electric vehicle architecture and Modular ElectricToolkit (MEB) to develop and sell a high-volume zero-emission vehicle in Europe starting in 2023, adding that it expects to deliver more than 600,000 European vehicles using the MEB architecture over six years.

The two companies said that deal will enable Argo AI technology to be used

“Unlocking the synergies across a range of areas allows us to showcase the power of our global alliance in this era of smart vehicles for a smart world,” Hackett said in his statement. By The Business Journals News Network A2Z MANUFACTURING WEST COAST •

27 • AUG - SEPT ‘19

ROCTEC® Abrasive Waterjet Nozzles Kennametal ROCTEC composite carbide waterjet nozzles are preferred by manufacturers and operators around the world for their superior wear resistance and quality performance.

ROCTEC APX

Extends life as much as 20% over industry-leader ROCTEC 500

ROCTEC 500

Trusted for consistent long-duration precision cutting

ROCTEC 100

Workhorse for everyday cutting ROCTEC has been the industry leading technology for over 30 years. Made in the USA and distributed by BARTON International.

Don’t settle for less.

800-741-7756 store.barton.com/roctec

BARTON is a trademark of BARTON Mines Corporation.

KENNAMETAL and ROCTEC are trademarks of Kennametal Inc.

OIL MIST AND SMOKE IN YOUR SHOP? Low-Cost, Highly Efficient Mist and Smoke Collectors Designed Specifically for the Metalworking Industry www.mistcollectors.com 1-800-645-4174

A2Z MANUFACTURING WEST COAST •

28 • AUG - SEPT ‘19

Feeling The Burn: Inside The Boot Camp For Elite Gas Turbines The state of South Carolina may have practically invented the punishing workout. It is home to The Citadel, the famously tough military academy — and anyone who has seen Stanley Kubrick’s “Full Metal Jacket” will never forget drill instructor Gunnery Sgt. Hartmann inflicting a special kind of purgatory on U.S. Marine Corps recruits at Parris Island.The city of Greenville, which is just a couple hundred miles north of the military installation, is also home to an equally grueling boot camp. But there is a major difference: Greenville’s trainees are not fresh cadets, but a crop of elite power plants.

This summer, the 9HA.02, the world’s largest and most efficient heavyduty gas turbine will be put through its paces in the toughest power plant proving course on earth: Greenville’s huge off-grid gas turbine validation facility located behind GE Power’s massive turbine factory here.And the drill sergeant is the calm, genial Bert Stuck, who has worked for GE Aviation and Power departments for 37 years.The veteran engineer laughs at the notion that his turbine test stand is a giant torture chamber. “Not quite: Our motto is ‘test and learn’,” he says.

Even so, Stuck and his team of engineers will push the 9HA.02 to its limits before it is deployed in the field, generating power for homes and businesses all over the world. They have got a full program of exercises in store for the turbine, which can generate 571 megawatts, enough to power a city with 650,000 households. “We will explore the turbine’s entire operational envelope — inside and out,” says the veteran engineer. That is jargon for the range of parameters in which the turbine can operate safely and effectively. It’s important to punish the machine in this way because it proves to customers that the turbines — which will one day be the grid’s workhorses — can withstand ultra-stressful conditions that are well beyond what they would encounter in ordinary service.

Engineers will test the turbine’s mettle in all areas. Stuck reels off a list: “Performance, efficiency, operational flexibility, mechanical and aeromechanical durability, gas and liquid fuel capability, its response to grid fluctuations, and so on.”

For example, engineers will ensure the 9HA.02 delivers top-tier performance and efficiency whatever the location. “We will have units going anywhere from Malaysia to northern Europe,” says Stuck. Engineers have a trick up their sleeves for replicating sweltering hot, and freezing cold days, and it is not turning the thermostat up to maximum, or down to zero. “We play with certain factors such as airflows or fuel splits to make the unit ‘think’ it is operating in different conditions,” says Stuck.

This may sound like random tinkering, but in reality, the testing stand is as far away from a mad professor’s laboratory as you can get. Every step taken during the test has been simulated by a team of turbine and plant controls experts before it is run in the test stand. “We want to understand how the

BIGGER. BETTER. BOLDER. Your One-Stop Shop for Metal Finishing Services

OEM APPROVALS (list non-exhaustive)

PAS Technologies, a StandardAero Company, offers a comprehensive portfolio of services for component processing in metal finishing, including: Nondestructive testing, shot / flap peening, grinding, special processing and paint.

Chemical Processing

• Anodize Type I, II, III • Black Oxide • Brush Cadmium • Brush Nickel • Cadmium Plating • Chemfilm/Alodine • Chrome Plating • Copper Plating • Dry Film Lube • Electroless Nickel • LHE - Low Hydrogen Embrittlement • Manganese/Zinc Phosphate Plating • Olive Drab • Passivation • Prime/Painting • Silver Plating • Sulfamate Nickel • Thin Dense Chrome Plating • Zinc Nickel

Metal Finishing & Enhancements • Flap Peen • Glass Bead • Shot Peen Grinding • Centerless Grinding • CNC Grinding • Jig Grinding • Surface and Low Stress Grinding Non-Destructive Testing Services • Fluorescent Penetrant Inspection • Magnetic Particle Inspection • Nital Etch

Certifications & Approvals • AS9100D, AS9110C w/ ISO9001:2015 • DDTC Registered • FAA / EASA Certified • NADCAP Accredited - Chemical Processing - Conventional Machining Surface / Low Stress Grinding - Non Destructive Testing - Surface Enhancement Shot Peen / Flap Peen • ROHS Compliant

test unit and facility will perform together,” says Stuck. “The simulations give us an excellent idea of what is going to happen.”

Although there are rarely big surprises, the testing procedure is still a huge learning experience.There are around 5,000 instruments across the turbine that continually gather data about its operations, performance and efficiency.These sensors ferry about 1 gigabyte of data per second to Greenville’s nerve center, a bank of computers manned by around 75 design engineers that resemble NASA’s mission control. “That’s like streaming a full hour of Netflix in one second,” says Stuck.

Safety is paramount, so the engineers stay alert for any data readings which look unusual.

“That’s priority No. 1 — although we have a good chance of catching anything before it breaks,” says Stuck. He explains that a test director can return the turbine to a safe operating point before any component failure.

“Then they’ll start reviewing the data,” says Stuck. Engineers will dive into data streams on component temperatures, airflow and cooling rates, air pressure, blade vibrations, fuel economy, efficiency and power output. “The design teams can get an idea of how the unit is functioning in real-time, as well as analyzing data streams post-event,” says Stuck.

Engineers are hunting for any marginal gain in performance or efficiency that might be up for grabs. It might lead to last-minute fine-tuning, even if it is just a tiny tweak to the shroud or aerofoil of a turbine blade for greater durability, or a small adjustment to the geometry of an extraction port to optimize cooling flows. “We make these kinds of hardware modifications in the factory to actual production units for the benefit of the customer,” says Stuck.

Turbines in Greenville train as hard as U.S. marine recruits at Parris Island, whose boot camps usually last 13 weeks. The 9HA.02 will undergo about 200 hours of test time over nearly three months, and those grueling sessions will last between 12 hours and two days. In the test facility, some 5,000 sensors gather data from across the machine before transmitting

CONTACT US TODAY TO LEARN MORE pnx_custsvc@standardaero.com 1021 N. 22nd Ave, Phoenix, AZ 85009 +1.602.744.2600 www.standardaero.com/phoenix

it to a mission-control-like nerve center, where dozens of engineers hunt for any marginal gains in performance or efficiency that can be wrought.

Image credit: Brian Erkens of Reel Video and Stills.

It is crucial to test the 9HA.02 at varying load conditions and demonstrate the capability to handle a significant number of starts. The world’s gas turbines are increasingly required to operate across a wide range of loads and operating modes such as cyclic (daily starts and stops) and peaking — the hours of high demand — because of the growth of renewables such as wind and solar. For example, utilities might switch off the 9HA.02 during periods of healthy renewable energy generation and low demand and switch it back on when demand picks up and solar or wind generation have slumped. “From no load conditions, it can reach full power in about 10 minutes,” says Stuck.

This kind of special testing simply cannot be done at the customer site. Greenville is like a special indoor soft play area that allows the engineers to push the turbine to its limits risk-free because the site is not connected to the grid. “That means we can replicate oddball conditions without the danger of tripping any grid,” explains Stuck. by Chris Noon A2Z MANUFACTURING WEST COAST •

29 • AUG - SEPT ‘19

Greenbrier Completes Purchase, Boosts U.S. Jobs Base By 66% L a ke O sweg o - ba s ed Greenbr ier Cos. has dramatically hiked its jobs base after completing its purchase of a Missouri manufacturer.

The purchase of American Railcar Industries, of St. Charles, Mo., gives Greenbrier 4,000 workers, the company said in announcing the move. ARI’s operations, including its 1,600 employees, “will be fully incorporated into Greenbrier’s North American business model both from a manufacturing and commercial perspective,” according to Greenbrier.

Greenbrier paid $410 million for ARI, which it actually bought from NewYork-based ITE Management LP.The strategy gives Greenbrier two Arkansas railcar manufacturing facilities, in Paragould and Marmaduke, along with manufacturing and administrative employees in St. Charles.

ARI also has two other Missouri locales as well as a site in Longview,Texas.

Greenbrier said the deal gives it a more complete product offering in tank cars and covered hoppers.” Bill Furman, Greenbrier’s chairman and CEO, said the move will further enable Greenbrier to grow while developing a solid talent pipeline. By Andy Giegerich, Portland Business Journal

:2015

Apple to Acquire Majority of Intel’s Smartphone Modem Business

Are you ready to implement or upgrade your Quality Management System to the new ISO 9001:2015 or AS9100D / ISO 9001:2015 Standard, AS9110C or AS9120B? Special Packages available, take advantage of 20 plus years’ experience implementing and auditing quality management systems for commercial and aerospace companies!

Bretta Kelly, President and Owner of BMSC, LLC www.businessmsc.com has proven, copy written templates for ISO 9001:2015, AS9100D / ISO 9001:2015, AS9110C / ISO 9001:2015 and AS9120B / ISO 9001:2015 Standards with more than 30 companies upgraded and certified with zero to one finding results to date in their upgrade audits!

Packages Available: Complete Electronic QMS System/Templates and 4 hours consulting – Manual, Policy, System Procedures, Work Instruction / Flow charts for some processes, internal audit program, management review program (including forms), competency / training program, objectives training template, risk training and how to document a corrective action training PowerPoint’s - $3,500

Complete Electronic QMS System/Templates and online webinar of how to complete – Manual, Policy, System Procedures, Work Instruction / Flow charts for some processes, internal audit program, management review program (including forms), competency / training program, objectives training template, risk training and how to document a corrective action training PowerPoint’s - $2,500

Do you need Quality Management System Software? Bretta Kelly is also President of CIS WWSG, LLC and is now offering the $3,500 Templates for FREE with purchase of CIS Software! www.cissoftware.com. CIS Software costs $5,000 upfront (one time) and $385/month license and server fees for UNLIMITED users, request a demo today!

Testimonial from BMSC Clients featured in the A2Z Manufacturing Magazine who have taken advantage of the BMSC Templates for successful upgrades: Bretta, I wanted to email you and let you know that because of the help of yourself and Debbie we completed our audit to the new revision with no findings! :) We very much appreciate all of the help that you both did for us and will recommend your company to anyone looking to get certified. Your system really makes it easy for companies like ours to stay organized and compliant to the guidelines. Kristie McKee, Gibbs Precision Machine

A2Z MANUFACTURING WEST COAST •

30 • AUG - SEPT ‘19

Intel and Apple have signed an agreement for Apple to acquire the majority of Intel’s smartphone modem business. Approximately 2,200 Intel employees will join Apple, along with intellectual property, equipment and leases. The transaction, valued at $1 billion, is expected to close in the fourth quarter of 2019, subject to regulatory approvals and other customary conditions, including works council and other relevant consultations in certain jurisdictions.

Combining the acquired patents for current and future wireless technology with Apple’s existing portfolio, Apple will hold over 17,000 wireless technology patents, ranging from protocols for cellular standards to modem architecture and modem operation. Intel will retain the option to develop modems for non-smartphone applications, such as PCs, internet of things devices and autonomous vehicles.

“This agreement enables us to focus on developing technology for the 5G network while retaining critical intellectual property and modem technology that our team has created,” said Intel CEO Bob Swan. “We have long respected Apple and we’re confident they provide the right environment for this talented team and these important assets moving forward.We’re looking forward to putting our full effort into 5G where it most closely aligns with the needs of our global customer base, including network operators, telecommunications equipment manufacturers and cloud service providers.”

THE NEW MITSUBISHI EDM...

BURNING CIRCLES AROUND THE COMPETITION.

NEW M800 CONTROL

- CYLINDRICAL DRIVE TECHNOLOGY - 19” TOUCHSCREEN CONTROL - FIBER OPTIC SERVO CONTROL

REMOTE MONITORING

- INDUSTRY LEADING AUTO-THREADING

TRADE-IN PROGRAM

Trump, Pritzker Push To Improve Apprenticeships

By Cole Lauterbach

They may agree on next to nothing, but Gov. J.B. Pritzker and President Donald Trump are both working to improve the availability of apprenticeship programs to help fill the need for skilled labor.

The freshman president, no stranger to apprenticeships, proposed a rule change late last month that would streamline the process for schools and businesses to coordinate on offering the opportunities and increase funding to coordinate the programs.

“The apprenticeship model of earning while learning has worked well in many American industries, and today we open opportunities for apprenticeships to flourish in new sectors of our economy,” U.S. Secretary of Labor Alexander Acosta said in a statement. “With 7.4 million open jobs and job creators searching for skilled job seekers, apprenticeship expansion will continue to close the skills gap and strengthen the greatest workforce in the world – the American workforce.”

The move is a shift away from some government agencies that had an interest in keeping a robust funnel of young adults entering four-year colleges regardless of whether it was the best fit, said Sam Adolphsen, policy director at the Foundation for Government Accountability.

“There were some government entities in the past that, I think, didn’t want

to see these opportunities expanded,” he said.

In Illinois, Pritzker signed a bill into law Friday that offers a tax credit to businesses that bring in qualified apprentices.

“An important part of my job is to transform our state into one of the most forward-thinking, economically prosperous, and innovative in the nation,” the governor said. “We have the most talented and dedicated workforce in the nation – but we need to produce tens of thousands of new skilled workers each year for the next ten years to replace the highly skilled manufacturing workforce that’s retiring – and to meet the growing demand for quality, talented employees.”

The idea was an initiative of the Illinois Manufacturers Association to bolster the number of new skilled workers to replace the growing number of retiring baby boomers.

“With 300,000 men and women set to retire from shop floors in the next decade, this new apprenticeship credit will allow manufacturers to jumpstart their efforts to build a pipeline of workers to fill the next generation of manufacturing jobs,” said Illinois Manufacturers Association President and CEO Mark Denzler.

“Apprenticeships leave their participants with little to no debt and give them marketable job skills in their industry,” said Sen. Ann Gillespie, the Arlington Heights Democrat who sponsored the bill.

A2Z MANUFACTURING WEST COAST •

31 • AUG - SEPT ‘19

Precious Metals Plating Co., Inc Specializing in Aerospace, Military, Electronic & Medical Since 1957

+ Gold Plating + Silver Plating + Nickel Plating + Electroless Nickel Plating + Tin Plating + Heat Treat With Plate + Nadcap Approved Processes + Boeing Approved Processes + Expedited Turnaround + X-ray Fluorescence Thickness Verification + In-House Laboratory With Atomic Absorption (AA) + Expanded Capacity In Vibratory Plating

the Massachusetts Institute of Technology.

Mark Lundstrom, Radia Aerospace’s founder and CEO, is a self-described serial entrepreneur, an MIT graduate and Rhodes Scholar.A one-time Boeing staffer, Lundstrom has founded several companies, including software developer Ripcord Systems of Seattle and ProterixBio of Boston, a health care startup that’s raised more than $100 million.

Lundstrom, who didn’t respond to interview requests, is a former fellow of the Aspen Institute. He serves on the advisory board of Columbia University’s Center on Global Energy Policy.

JamesVana, a Seattle attorney with Perkins Coie, handled a trademark application for Radia in 2017.Vana declined to comment, but described Radia’s business activities in the filing as “air transportation services for cargo.” By Andrew McIntosh – Staff Writer, Puget Sound Business Journal

Sharing Control With Robots May Make Manufacturing Safer, More Efficient

We Are The Noble Partner With The Personal Touch!

(800) 481-6271 www.pmplating.com Ex-Boeing, Airbus, Blue Origin Engineers Develop Aircraft At Stealth Aerospace Startup An aerospace startup that includes former Boeing, Airbus and Blue Origin engineers in Seattle and Colorado is designing and building a cargo aircraft, the Business Journal has learned.

Officially, the Boulder, Colorado-based company known as Radia Inc. is in stealth mode. Its website says the company is “bringing technological, environmental, and business innovation to the interface of environment/energy/aerospace.”

A review of postings by its senior management team on the LinkedIn professional networking site, along with details in other public records filings, reveals that they are building a cargo airplane.

Radia was founded in 2016 and has around 30 employees. Many are ex-Boeing staffers and nine attended A2Z MANUFACTURING WEST COAST •

32 • AUG - SEPT ‘19

Hulking robots common to assembly line manufacturing tend to be loners. They often cut, bend and weld metal inside cages and behind barriers meant to safely separate them from human workers.

“For a long time, the best factory robot has been one that you set up, and you don’t touch for two years. It does the same thing over and over, unchanged, a million times,” says Bilge Mutlu, a University of Wisconsin–Madison professor of computer science, industrial engineering and psychology. “But because those robots are built to be very powerful and very accurate, they are also very dangerous

for people.You can’t get in its way.”

With new support from NASA, Mutlu and partners at UW–Madison and Boeing are designing lowerpower robots that can handle a wider range of less-rigidly defined tasks by working more collaboratively with a human operator.

The UW researchers have focused on “shared control,” in which a human wired with sensors and controls guides a robot’s arms through the course of a task like sorting objects or mixing ingredients according to a recipe. Even new users are able to operate these robots effectively, because the robots step in to help by applying things they’ve been taught about the way humans deftly coordinate the movement of two arms and hands to corral and lift and pass objects.

Mutlu, graduate student Daniel Rakita and computer sciences Professor Michael Gleicher have also published methods for deploying robot-controlled cameras to give the human operator—”whether they’re standing a few feet away or they’re in Houston and the robot is on a space station,” Mutlu says—the best view of the workspace, tools, materials and the robot’s hands.

With that core technology and a $3 million grant from NASA Aeronautics, the UW–Madison group—which includes Gleicher, mechanical engineering Professor Michael Zinn and industrial and systems engineering Professor Robert Radwin—will adapt robots to some of the specific types of manufacturing work that piece together a Boeing airliner.

“We identified a number of processes in aircraft manufacturing where this shared control could help,” Mutlu says. “Take riveting. There are thousands of rivets that have to be banged in there to join the metal of an airplane together. That’s hard, repetitive work.”

Making composite materials, sanding metal, painting and fitting parts together in confined spaces are other steps in the plane construction process that get safer by moving the relatively fragile human body slightly farther away from the action. Shared control of a robot could make that happen without also removing the human aircraft builder’s skills.

“We’re keeping the operator’s expertise, their knowledge of the nuances of the process, in the equation,” Mutlu says. “They can direct the action without being involved manually, and the process gets more ergonomic and efficient.”

Over the next three years, Mutlu hopes the collaboration with Boeing will move a new robot manufacturing platform from Madison to the Boeing laboratories, where it will be further developed for the production floor and then to worldwide use.

“As we’re building it, we’re going to do a lot of testing here in our lab,” he says. “Eventually we want to take it to Boeing and actually demonstrate it there. And a mature, federally funded system that works could be used by anyone in aviation manufacturing.” by Chris Barncard, University of Wisconsin-Madison A2Z MANUFACTURING WEST COAST •

33 • AUG - SEPT ‘19

Precision Precision Ceramic Ceramic Machining Machining

3D-Printing MarketContracts Revenues Expected To Skyrocket By 2020

BAE Systems Land & Armaments, San Jose, California, was awarded a $7,840,325 modification (P00105) to contract W56HZV-15-C-0099 for management and engineering efforts associated with the development of a new Technical Data Package, Interactive Electronic Technical Manual and Training Manuals for the M993A2 Multiple Launch Rocket System Since Since Carrier.

Work will be performed in San Jose, California, with an estimated 1984 1984 completion date of .June 25, 2021. Fiscal 2019 other procurement, • Forsterite • Alumina Army funds in the amount of $7,840,325 were obligated at the time of • Alumina • Forsterite MgPSZ & YTZP Ceramics (MACOR) •• Zirconia’s Zirconia’s MgPSZ & YTZP • Machinable • Machinable Ceramics [MACOR] the award. U.S. Army Contracting Command, Warren, Michigan, is the •• Silicon SiliconNitride Nitride • Mullite • Mullite contracting activity.

• Sialon Sialon • Ferrite • Ferrite • Silicon SiliconCarbide Carbide • Quartz EMC Corp., Irvine, California, has been awarded a $74,423,388 • Quartz • Aluminum Aluminum Nitride • Zirconia Toughened Nitride •• Boron BoronNitride Nitride Alumina [ZTA] firm-fixed-price, indefinite-delivery/indefinite-quantity contract for • Zirconia Toughened Alumina (ZTA) • Sapphire instrumentation support, configuration, management, development, • Sapphire loading, integration, analysis and decommutation (ILIAD) and flight test instrumentation systems operation. This contract provides for greater mission capabilities by accessing contractor personnel with specialized Thetraining additiveand manufacturing is poised a boom between expertise inindustry utilization and for troubleshooting of now the ILIAD andsystem.

2020, according to International Data Corp.

Work will be performed at Edwards Air Force Base and Irvine, 845 Research Drive, Woodland Park, California, and is expected to be complete by June 6, 2024. This award CO 80863 • Ph: (719) 687-0888 Theisvalue of the worldwide market for 3D printingFiscal is expected jump and the result of a sole-source acquisition.

2019 toresearch Fax: (719) 687-0889 to $35.4 billion by 2020, more than double the $15.9 billion forecast development funds in the amount of $109,387 are being obligated at the info@okeefeceramics.com fortime the end of 2016, of award.

TheIDC Air data Forceshows.

Test Center, Directorate of Contracting,Test www.okeefeceramics.com Range and Specialized Contracting Branch, Edwards AFB, California, is www.okeefeceramics.com Thethe compound annual growth rate between 2015 and 2020 is 24.1%, contracting activity (FA9304-19-D-0001).

ISO 9001: 2008 Quality Management System ISO 9001:2008 Quality Management Systemthe IDC said.

General Atomics Aeronautical, Poway, California, was awarded a $7,639,948 modification (P00031) to contract W58RGZ-17-C-0035 “While 3D printers and for engineering change proposal to upgrade the Warrior AlpharepreUnmanned materials will Aircraft System fleet to a Gray Eagle Block 0sent UASnearly deployable configuration. half the toWork will be performed in Poway, California, withrevenues an estimated tal worldwide GMA GARNET GROUP completion date of Oct. 28, 2020. Fiscal 2019 other procurement, throughout the forecast,Army when your abrasive matters! funds in the amount of $7,639,948 weresoftware obligated and at the time of the related award. U.S. Army Contracting Command,services Redstone Alabama, willArsenal, also experiis the contracting activity. ence significant growth,” said an IDC statement.

Raytheon Co., Fullerton, California, has been awarded a $26,600,000, indefinite-delivery/indefinite-quantity, firm cost-plus “Revenues for computer-aided design software are fixed-price, forecast to triple over fixed fee, cost reimbursable contract for the Situation Awareness Data Link the five-year forecast period while the market for on-demand parts program.

This contract provides software maintenance and engineering services will nearly match this growth. The gains in both software and services support services.are Work will be performed in Fullerton, California, on-demand parts printing being driven by the rapidly expanding is expected completed

by Aug.and 21, products 2024. This award is the useand of 3D printingto forbedesign prototyping that require a result of a sole source acquisition.

Fiscal 2019 operations and maintenance funds high degree of customization in non-traditional environments. in the amount of $3,012,233 are being obligated at the time of award.

The Air Force Life Cycle Management Center, Robins Air Force Base, Georgia, is the contract activity (FA8574 19 D 0001).

PANTONE Process Black PC R:35 G:31 B:32 C:70 M:67 Y:64 K:74

A2Z Manufacturing Rocky Mountain

•

34 • Sept / Oct

A2Z MANUFACTURING WEST COAST •

Z Mfg.1/4 pg.3.2015.OUTLINES.indd 1

2016

34 • AUG - SEPT ‘19

50% PANTONE Process Black PC R:145 G:143 B:143 C:45 M:38 Y:38 K:3

30% PANTONE Process Black PC R:189 G:188 B:188 C:26 M:21 Y:22 K:0

PANTONE 364 PC R:43 G:117 B:58 C:84 M:31 Y:100 K:19

PANTONE Yellow PC R:255 G:238 B:0 C:3 M:0 Y:96 K:0

Lockheed Martin Aculight Corp., Bothell, Washington, is awarded an $8,184,205 cost-plus-fixed-fee, cost-only modification to previously awarded contract N00024-18-C-5392 to exercise options for technical and field engineering services and a cost-only line item for travel in support of Surface Navy Laser Weapon System Increment 1, High Energy Laser and Integrated Optical-dazzler with Surveillance (HELIOS) system.Work will be performed in Bothell,Washington, and is expected to be complete by July 2020. Fiscal 2019 research, development, test and evaluation (Navy) 3/23/15 6:33 AM

funds in the amount of $249,882 will be obligated at time of award and will not expire at the end of the current fiscal year.

Mercury Defense Systems Inc., Cypress, California, is being awarded a $22,901,395 cost-plus-fixed-fee, cost reimbursable order (N0042119-F-6104) against a previously issued basic ordering agreement (N0042117-G-0001).This order provides for the development, integration, delivery and test of the Radar Air-to-Ground Environment in support of the Integrated Battlespace Simulation and Test Air Combat Environment Test and Evaluation Facility. Work will be performed in Cypress, California (80%); Patuxent River, Maryland (10%); and Edwards Air Force Base, California (10%), and is expected to be completed in July 2022. Fiscal 2019 research, development, test and evaluation (Navy) funds in the amount of $300,000 will be obligated at time of award.The Naval AirWarfare Center Aircraft Division, Patuxent River, Maryland, is the contracting activity.

The Boeing Company, Seattle, Washington, has been awarded a $70,968,876 firm-fixed price modification to previously awarded contract FA8625-11-C-6600 for a previously established option for KC46 interim contractor support year three. Work will be managed out of Seattle, Washington, and is expected to be completed by June 27, 2020.

Fiscal 2017 procurement funds in the amount of $70,968,876 are being obligated at the time of award. Air Force Life Cycle Management Center, Wright-Patterson Air Force Base, Ohio, is the contracting activity.

Raytheon, El Segundo, California, has been awarded a $47,676,543 cost-plus-incentive-fee contract for next generation application specific integrated circuit Preliminary Design Review (PDR). This contract provides for the design, develop and test of modernized Global Positioning System receivers that are intended for future military applications to the PDR level. Work will be performed in El Segundo, California, and is expected to be completed by December 2020. Fiscal 2019 research and development funds in the amount of $19,300,000 are being obligated at time of award. The Space and Missile Systems Center, Los Angeles Air Force Base, California is the contracting activity (FA8807-19-C-0002).

Lockheed Martin Space, Sunnyvale, California, has been awarded a $15,915,000 modification (P00770) to previously awarded contract F04701-02-C-0002 for Advanced Extremely High Frequency (AEHF).The contract modification is to make changes to the AEHF Mission Planning Element software to provide capability improvements. Work will be performed at Sunnyvale, California, and is expected to be completed

by June 30, 2020. Fiscal 2017 space procurement appropriation in the amount of $15,915,000 is being obligated at the time of award. Space and Missile Systems Center, Los Angeles Air Force Base, California, is the contracting activity.

Parker Hannifin Corp., Irvine, California, has been awarded a maximum $13,828,991 firm-fixed-price delivery order (SPRPA1-19-F-KP2V) against a five-year basic ordering agreement (SPE4A1-17-G-0011) for F/A-18 spare parts. This was a sole-source acquisition using justification 10 U.S. Code 2304 (c)(1), as stated in Federal Acquisition Regulation 6.302-1. This is a 47-month contract with no option periods. Location of performance is California, with a June 30, 2023 performance completion date. Using military service is Navy. Type of appropriation is fiscal 2019 through 2023 Navy aircraft procurement funds. The contracting activity is the Defense Logistics Agency Aviation, Philadelphia, Pennsylvania.

PVD COATING CENTER

MDC

MOLECULARLY DENSE COATING

• 30% higher heat resistance • Greater lubricity than AlTiN • Increases tool life up to 200% • Up to 30% faster speeds & feeds

FASTEST DELIVERY UNMATCHED CONSISTENCY swifttool.com

COATING@SWIFTTOOL.COM SWIFT COATING CENTER 800-562-0900 A2Z MANUFACTURING WEST COAST •

35 • AUG - SEPT ‘19

That’s Hot: This Lung-Inspired 3D-Printed Part For Cooling CO2 Could Take Power Generation To The Next Level

by Fred Guterl

When Charles Parsons invented the steam turbine in 1884, it was a monumental advance. More than a century later, engineers are still relying on steam to operate the turbines that generate much of the world’s power.

Perhaps it’s about time to take the technology to the next level.

One way to do that is to draw inspiration from the human body. That’s exactly what Peter deBock and his colleagues at GE Research in Niskayuna, NewYork, did:They devised a heat exchanger — an essential component of the cooling system of a power turbine — that mimics human lungs.

Heat exchangers are used in power plants to move energy from the hot exhaust that flows out of the primary gas turbine and transfer it to a secondary turbine power loop, or bottoming cycle, to generate more electricity.This process essentially cools the primary turbine exhaust flow with a “working fluid,” like the antifreeze of a car.

Most bottoming cycles use steam as the working fluid. Conventional alloys and manufacturing methods, however, limit operating temperatures to less than 1,200 degrees Fahrenheit.

But what if there were another way? By using other alloys, additive manufacturing (commonly known as 3D printing), and a different working fluid for the bottoming cycle, engineers hope to raise the operating temperature and increase thermal efficiency. Higher temperatures and pressures allow them to pack more punch into a smaller area and extract more energy from it.

METALS

SHAPES

SERVICES

Aluminum Steel Stainless Brass Copper Ornamental

Sheet/Plate Production Cutting Shim/Bar Tube/Pipe Precision Channel Sawing Angle Shearing Beam Perf./Expand.

818-729-3333, www.IMSmetals.com

So-Cal’s Source For All Your

Metal Needs Next Day Delivery - No Minimum - Open Saturdays

STOP BY TODAY! Los Angeles | Orange County | San Diego | Inland Empire A2Z MANUFACTURING WEST COAST •

36 • AUG - SEPT ‘19

One promising working fluid candidate is supercritical carbon dioxide, the same gas that makes soda fizzy. When temperature and pressure hit the right conditions, CO2 becomes supercritical — it acquires the density of liquid but flows more like a gas, and holds an enormous amount of heat energy. As a result, a power generator using it as a medium can be 10 times smaller and more efficient than one that uses steam, and also requires fewer parts. (GE Research is involved in a project led by GasTechnology Institute and partnering with Southwest Research Institute to build a $122 million, CO2 demonstration plant capable of generating of 10-megawatts of electricity (MWe).)

Top image: Combining deep expertise in high temperature metal materials, thermal management and additive manufacturing, GE Research Senior Engineer and Metallurgist, Laura Dial, and Peter deBock, a Principal Engineer and specialist in Thermal Management, will work with a team of GE specialists to design an ultra-performing heat exchanger that

improves the efficiency profile for both power generation and advanced aerospace applications. Not pictured but also supporting this development are Bill Gerstler, a Principal Engineer in Thermal Management, and Dan Erno, an additive design specialist. Above: A prototype of a 3D printed heat exchanger designed by GE researchers Dan Erno and Bill Gerstler at GE’s Research campus in Niskayuna, NY. This heat exchanger was designed to have a tri-furcating structure where both fluids split in three directions and recombine continuously throughout the device, mimicking bio-inspired natural concepts like the human lungs to improve thermal efficiency. Images credit: GE Research.

TURN TO THE LEADER IN SPINDLE PRECISION SALES • SERVICE • SUPPORT

Check Out Our New State-of-the-Art Facility!

Supercritical CO2 is a big priority for ARPA-E, the U.S. Department of Energy’s advanced research arm. Recently,ARPA-E put out a call for a new kind of heat exchanger that could help these advanced power plants handle temperatures of 1,650 degrees F — more than 450 degrees higher than current heat exchangers that use steam — at pressures of more than 3,600 pounds per square inch. (Atmospheric pressure at sea level is 14.69 psi.)

When deBock and his colleagues heard these requirements, their minds went to two advances simmering at GE Research’s labs in Niskayuna: “extreme design skills and extreme metallurgy skills,” deBock says.

Laura Dial, a senior researcher from the metallurgy team, worked to develop an advanced nickel superalloy for use in jet engine parts.The metal is capable of retaining sufficient strength at extreme high temperatures and is also suited for additive manufacturing, a relatively new technology in which a computer-controlled machine fuses together thin layers of material, including high-end metal, to build a part. Objects built by 3D printing can have much more intricate shapes than those made with conventional manufacturing techniques. “With 3D printing,” says deBock, “we can build design architectures that were previously impossible.”

3D printing paved the way for some radical thinking about how to design a heat exchanger for high temperatures and pressures. DeBock’s team took inspiration from human lungs, which play an important role in helping cool the body to about 98 degrees F. ”Lungs,” says deBock, “are the ultimate heat exchanger.”

The lung accomplishes its heat-exchange function with a network of capillaries, which split the flow of blood into small streams to maximize their exposure to the cooler air coming in from the outside, releasing heat and absorbing oxygen.The GE heat exchanger, designed by scientist Dan Erno, does something similar. It takes hot airflow that comes out of the gas turbine and splits and recombines it continuously into a trifurcating network of ducts, each less than 2.5 millimeters in diameter, that are interlaced with another network of channels filled with the colder working fluid (in this case, supercritical CO2) that runs in the opposite direction.

The hot air and the working fluid are kept physically separate, but their close proximity allows for efficient heat exchange.

In April, ARPA-E awarded GE a $2.5 million, 2.5-year grant to develop a 50-kilowatt demonstration heat exchanger using its new design. GE’s partners in the project include Oak Ridge National Laboratory, which will contribute expertise in corrosion science to test and validate the material’s long-term performance, and the University of Maryland, which will aid with heat exchanger design and optimization expertise.

• 800-686-1679 • info@gmnusa • www.gmnusa.com

ISO/AS9100 CERTIFIED

We believe that we are stronger and more viable when we make something for US Manufacturing!

Put our Machining Passion to work for you! call today: 480-773-3239 www.flexproaz.com

A2Z MANUFACTURING WEST COAST •

37 • AUG - SEPT ‘19

The Manufacturer’s Secret Weapon GOLF WITH A PURPOSE – Part Two

By Stephen M. Hannemann

Overall Wining Team – Manuel Soto and Dennis Riley Stephen Hannemann – Tournament Organizer, Dave Heleniak – Awards presenter Today heartfelt gratitude is pouring out from the 21 residents of Ryan’s House forYouth, for your contributions to the success of the Ryan Busche Memorial GolfTournament. In the April / May issue of A2Z Manufacturing West Coast, I brought your attention to RHFY, and this fundraising golf tournament.

On August 3, 2019 the proceeds from the 1st Annual Ryan Busche Memorial will fund 82 days of support for homeless youth! A day of services administered consists of housing, meals, family mediation and counseling, medical support, and transportation. You have admirably and effectively taken part in saving young lives and preventing future career homelessness!

Our gratitude to the major sponsors: Summit Funding Inc. Lexus of Seattle Our gratitude to the Hole sponsors: 3D Plastics, Inc. Stevens Tool & Die Jamieson Tool & Design Northwest Metalcraft Pacific Swiss & Manufacturing, Inc. SMH Inc. Craig and Barbara Achatz Coldwell Banker Tara Properties Hanson’s Building Supply The Goose Community Grocer A2Z MANUFACTURING WEST COAST •

38 • AUG - SEPT ‘19

Anco Inc. / Readi Spaghetti Matt’s Import Haven Whidbey Doughnuts Whidbey Coffee Sebo’s Do-it Center Island County Democrats And, to all the pr ize donor s and volunteers, I apologize there is not enough room on this page to express our gratitude.

Just know that you are the reason this endeavor was such a success!

A Final Note From Ryan’s House For Youth Founder And Executive Director Lori Cavender: “It has been a blessing to partner with Stephen Hannemann to begin our first golf tournament. The Busche family and Ryan’s House For Youth, in which Ryan Busche is memorialized, have been touched at the outpouring of support both for the tournament and the work being done to help homeless youth and young adults become successful and stable community members. We look forward to growing this event each year so that we are able to offer additional supports and services to more young people.”

In closing, our sincere thanks also to Paul Lavin of Holmes Harbor Golf Course for hosting our tournament.The course was in superb condition!

If you would like to learn more about Ryan’s House For Youth or be an ongoing supporter, visit www.ryanshouseforyouth.org. Explore and learn about the wonderful progress and successes the young people are experiencing. Also you are invited to take part in any number of support options.

And once again, on behalf of the youth at Ryan’s House – Thank you!

Sincerely, Stephen M. Hannemann – President SMH Inc. – www.smhincllc. com

SMH Inc. – “The Manufacturer’s Secret Weapon”

Boeing Submits Plans To Expand 737 Max Production Facilities Despite a worldwide grounding of its bestselling jet, Boeing is developing a $132.9 million project to expand its 737 Max aircraft production facilities in Renton.

The project, detailed in land-use documents obtained by the Business Journal, suggests the Chicago-based jet maker is investing big as it prepares to boost production once the Max fallout begins to wane and the plane is certified to fly again. The Max has been grounded across the world since March.

REDUCING TORQUE REACTION DOESN’T HAVE TO BE COMPLICATED QX Series™ Ergonomic Tightening Systems Control and ergonomics, not compromise - that is what the QX Ergonomic Tightening System is all about. QX ETS offers all the capabilities found in the QX Series™ platform, without the torque reaction.

SIMPLE

The proposed facilities — to be built on a 6.61 million-square-foot portion of the Renton property — appear designed to support much higher output than Boeing’s production of nearly 50 jets a month.

“In order to meet future needs, we are studying a plan for additional paint capacity and airplane stalls at our Renton site,” Boeing spokesman Paul Bergman said. “We will work closely with the city of Renton during the process.”

Boeing has been drafting plans and working with engineers, potential contractors and noise study consultants for months, for what it calls the Apron E project, records show.

CAPABLE

FLEXIBLE

Visit IRTOOLS.COM/ETS to request a demo today USB compatible

ICS

ETS

(Ergonomic Tightening System)

Simple Setup In addition to standard direct drive mode, each tool configuration can be independently programmed to utilize one of the three available single-parameter ETS modes, simpliying setup: 1. Ergonomic Mode: With the lowest energy pulses, is ideal for hand joints or when arm wrist or tool angles are most difficult

2. Performance Mode: With Medium energy pulse, is the best all-purpose mode

3. Productivity Mode: With the highest energy pulses, is the fastest mode. Ideal for soft joints or when high production rates are required

The project would include: A two-bay paint facility building (at least 235 feet by 307 feet and 85 feet high) to accommodate jets as large as Boeing’s 737 Max 10.

A two-story production support facility that will feature offices, conference rooms, storage and employee lockers.

Three aircraft stalls where mechanics and technicians will work on aircraft, together with a 25-foot-high specialized sound barrier.

An electrical and mechanical utility building.

A stormwater treatment system, including an oil/water separator vault system.

A Boeing rendering shows plans for a

Renton factory expansion that includes a new two bay painting hangar, a three new aircraft production stalls and office and conference rooms in a building behind the paint facility.

To make room for the new facilities, Boeing has proposed demolishing a parking lot it identified as S-2 lot at 737 Logan Ave. N. that has 1,000 employee spots.

The Apron E project also requires Boeing to demolish an existing fire station and rebuild it at an area north of the project site, under another building permit application process.

The jet maker’s expansion plans emerged a week after Boeing CEO Dennis Muilenburg said the company may have to cut or halt production of the 737 Max if safety regulators do not soon re-certify it to fly.

One aerospace industry source, speaking on condition they weren’t identified to not harm business relationships, said that before the two 737 Max crashes that killed a combined 346 people, Boeing 737 factory planners were quietly studying factory production flows to determine if Max production could be boosted as high as 100 aircraft a month. By Andrew McIntosh, Puget Sound Business Journal A2Z MANUFACTURING WEST COAST •

39 • AUG - SEPT ‘19

Buyer’s Guide & Card Gallery Equipment and Services

Cutting Tools made in the U.S.A. since 1964

w w w. t h i n b i t . c o m

A2ZWCBG2019.indd 1

ACCESSORIES Abrasive Systems Applications Specialities____ 253-872-0305 MESCO______________ 626-303-5680 S.L. Fusco San Leandro_____510-895-9000 S.L. Fusco R. Dominguez____ 310-868-1010 S.L. Fusco National City_____619-477-7733 Swift Tool Co, Inc._______ 800-562-0900 Air Cleaning Guns Royal Products_________631-273-1010 Air Coupliings Bilz USA____________ 224-563-7233

Auto-Bar Feed Systems Western Machine Center____408-955-1000 Ballscrews C & M Precision Spindle, Inc.__503-691-0955 Band Saws/Saw Blades Bandsaw Tech__________562--419-7675

Cycle Time Solutions_____510-708-8665 S.L. Fusco San Leandro_____510-895-9000 S.L. Fusco R. Dominguez____ 310-868-1010 S.L. Fusco National City_____619-477-7733

A2Z MANUFACTURING WEST COAST •

12/6/2018 10:33:33 AM

Swift Tool Co, Inc.________ 800-562-0900 S.L. Fusco R. Dominguez____ 310-868-1010 Coolant S.L. Fusco National City_____ 619-477-7733 Applications Specialities_ _____253-872-0305 Band Saw Replacement Parts Bandsaw Tech__________ 562--419-7675 Swift Tool Co, Inc.________ 800-562-0900 Star Metal Fluids_________800-367-9966 US Shop Tools___________800-243-7701 Chemicals: Ultrasonic Band Saw Repair Bandsaw Tech__________ 562--419-7675 Star Metal Fluids________ 800-367-9966 Bar Feeders ChuckJaws Automatics & Machinery Co., Inc_303-990-6190 Lucy’s Machine Company____ 323-587-6162 Edge Technologies_______ 951-440-1574 Spinetti Machinery_______ 775-996-3770 Bar Feeder Repair Edge Technologies_______ 951-440-1574 Boring THINBIT_____________ 888-844-6248

Coolant Systems & Chillers MP Systems____________909-282-7463 Collets & Chucks Star Metal Fluids_________800-367-9966 Cycle Time Solutions______ 510-708-8665 Swift Tool Co, Inc._________800-562-0900 Edge Technologies_______ 951-440-1574 Countersinks, Royal Products_________ 631-273-1010 Fullerton Tool Company_ _____ 303-478-3497 Swift Tool Co, Inc.________ 800-562-0900 Cutting Fluids & Oils US Shop Tools__________ 800-243-7701 Castrol_______________800-894-7773 CNC Lathe Accessories

Burrs Fullerton Tool Company_____ 303-478-3497 Trusty-Cook___________ 877-240-2462 Von Ruden Manufacturing, Inc._763-682--3122 Cams CNC Spindle Liners Dayton Lamina._________ 708-203-6684 Trusty-Cook___________ 877-240-2462 Carbide Tools, Indexable

Cycle Time Solutions______ 510-708-8665 Horizon Carbide_________ 602-524-3802 MESCO______________ 626-303-5680 S.L. Fusco San Leandro_____ 510-895-9000

40 • AUG - SEPT ‘19

Coolant Shields Lucy’s Machine Company_____ 323-587-6162

Hangsterfer’s___________ 316-640-2462 Hangsterfer’s___________ 760-580-1357

S.L. Fusco San Leandro______510-895-9000 S.L. Fusco R. Dominguez_____310-868-1010 Compressor Systems S.L. Fusco National City______619-477-7733 Ingersoll Rand__________ 206-472-0826 Star Metal Fluids________ 800-367-9966 Swift Tool Co, Inc.________ 800-562-0900 Cooling Systems Cutting Tools Buds Equipment Sales_____ 435-659-9455

Division of Curran Manufacturing Corporation

200 Oser Avenue Hauppauge, NY 11788 U.S.A.

Tel:

1-631-273-1010 1-800-645-4174 Fax: 1-631-273-1066 1-800-424-2082

www.royalprod.com

orders@royalprod.com

4740 NE 166th Avenue Portland, OR 97230 (503) 224-6061 (877) 398-6061 Fax (503) 253-1790 Cell (503) 572-9331 ERIC JAMES 15600 NE 8th, Ste B-1, #162 | Bellevue, WA 98008 Office: 425.881.1200 | Cell: 206.713.7748 | ejames@pmtnw.com

www.coastaluminum.com jpalmer@coastaluminum.com

John Palmer Jr.

www.pmtnw.com

Vice President: Northwest Region

Applications Specialities____ 253-872-0305 Royal Products_________ 631-273-1010 Fullerton Tool Company____________ Die Tooling Springs 303-478-3497 Bilz USA____________ 224-563-7233 Dayton Lamina._________708-203-6684 Horizon Carbide_ _ _______ 602-524-3802 Horizon Carbide________ 602-524-3802 S.L. Fusco San Leandro___510-895-9000 Drills/Cutters-Magnetic Innovative Tool Sales______714-780-0730 MESCO______________ 626-303-5680 Bilz USA____________ 224-563-7233 S.L. Fusco R. Dominguez____ 310-868-1010 Rosco Precision Machinery___206-818-6813 Innovative Tool Sales______714-780-0730 S.L. Fusco National City_____ 619-477-7733 S.L. Fusco San Leandro____ 510-895-9000 S.L. Fusco San Leandro_____510-895-9000 Swift Tool Co, Inc.______800-562-0900 Fabrication Tooling S.L. Fusco R. Dominguez____ 310-868-1010 S.L. Fusco R. Dominguez___310-868-1010 S.L. Fusco National City_____619-477-7733 S.L. Fusco National City____619-477-7733 Dayton Lamina._______708-203-6684 Spinetti Machinery_______775-996-3770 Swift Tool Co, Inc._______ 800-562-0900 THINBIT_____________888-844-6248 US Shop Tools__________800-243-7701 Von Ruden Manufacturing, Inc._763-682--3122 Cutting Tool Holders Bilz USA____________ 224-563-7233

Innovative Tool Sales______714-780-0730 Cutting Tool Systems Bilz USA____________ 224-563-7233

Filiter Mist Collectors Dovetail Fixtures 5th Axis_____________858-616-7373 Royal Products_______631-273-1010 Form Tooling Draw Tubes & Bars Lucy’s Machine Company____ 323-587-6162 THINBIT_____________ 888-844-6248 Drills/Reamers/Taps Grooving Head, Grooving Tools Bilz USA____________ 224-563-7233 Cycle Time Solutions______ 510-708-8665 S.L. Fusco San Leandro_____510-895-9000 THINBIT_____________ 888-844-6248 S.L. Fusco R. Dominguez____ 310-868-1010 Guide Bushings, Swiss S.L. Fusco National City_____ 619-477-773 Edge Technologies_______ 951-440-1574 Swift Tool Co, Inc.________800-562-0900 Hydraulic Fluids EDM Materials & Supplies S.L. Fusco San Leandro_____ 510-895-9000 Desert EDM____________480-816-6300 S.L. Fusco R. Dominguez___310-868-1010

Cycle Time Solutions______510-708-8665 Innovative Tool Sales______714-780-0730 S.L. Fusco San Leandro____ 510-895-9000 EDM Network__________480-836-1782 S.L. Fusco R. Dominguez____ 310-868-1010 EDM Performance_______ 800-336-2946 S.L. Fusco National City_____619-477-7733 End Mills Spinetti Machinery_______775-996-3770 Applications Specialities_ ____253-872-0305 THINBIT_____________888-844-6248 Bilz USA____________ 224-563-7233 Deburring Tools

Swift Tool Co, Inc._______ 800-562-0900 Jaws EDM Network_________ 480-836-1782 US Shop Tools__________800-243-7701 Keyseat Cutters Fullerton Tool Company_____303-478-3497 Lifting & Material Handling Ingersoll Rand__________206-472-0826 Live Centers Royal Products_________631-273-1010 Load Unload Systems Edge Technologies_______ 951-440-1574 Lubricants / Systems Hangsterfer’s__________316-640-2462 Hangsterfer’s__________760-580-1357

S.L. Fusco San Leandro____ 510-895-9000 S.L. Fusco R. Dominguez____ 310-868-1010 S.L. Fusco National City_____619-477-7733 Star Metal Fluids_______ 800-367-9966 Swift Tool Co, Inc._______ 800-562-0900 Machine Tool Acccessories S.L. Fusco National City____619-477-7733 Swift Tool Co, Inc.________800-562-0900 Indestructable Keyboards US Shop Tools__________800-243-7701 Byte Box______________ 888-bytebox Von Ruden Manufacturing, Inc._763-682--3122 Inserts Machine Tool Cool Filtration Horizon Carbide_________ 602-524-3802 S.L. Fusco San Leandro____ 510-895-9000

Von Ruden Manufacturing, Inc. Since 1946

Fluid Power / Mechanical / Tool Products ISO 9001:2008 Certified

Brandon Anderson President

MOBILE: 612.251.0868 E-MAIL: brandon@vonruden.com

DIRECT: 763.682.0322 PHONE: 763.682.3122 FAX: 763.682.3954

1008 First Street NE - PO Box 699 - Buffalo, MN 55313 USA Made in USA

www.vonruden.com

Driven Tooling for the Machine Tool Industry

Made in USA

A2Z MANUFACTURING WEST COAST •

41 • AUG - SEPT ‘19

Exclusive provider of OKUMA

Marc Goerlich Business Manager

GOSIGER NORTHWEST 21911 68TH Ave South Kent, WA 98032

C 253.278.1110

E marc.goerlich@gosiger.com www.gosiger.com

Since 1922

ISO 9001:2008 Certified

GROUP

Brandon Anderson

Von Ruden Manufacturing, Inc. MOBILE: 612.251.0868 E-MAIL: brandon@vonruden.com

DIRECT: 763.682.0322 PHONE: 763.682.3122 FAX: 763.682.3954

1008 First Street NE - PO Box 699 - Buffalo, MN 55313 USA Made in Italy

www.live-tooling.com

Driven Tooling for the Machine Tool Industry

Made in Italy

S.L. Fusco R. Dominguez____ 310-868-1010 SawBlade.com__________800--240-2932 S.L. Fusco National City_____619-477-7733 Solvents: Vapor degreasing Star Metal Fluids________800-367-9966 Star Metal Fluids________ 800-367-9966 Milling & Turning Products Solvents:Hand Wipe Von Ruden Manufacturing, Inc._763-682--3122 Star Metal Fluids________ 800-367-9966 Modular Spray Systems Solvents: Mil PRF 680 Swift Tool Co, Inc._______ 800-562-0900 Star Metal Fluids________ 800-367-9966 Mounting Brackets Special Tooling Lucy’s Machine Company____ 323-587-6162 THINBIT_____________ 888-844-6248 Spindle Liners Optical Mouse-Silicone Based Lucy’s Machine Company____ 323-587-6162 Byte Box_____________ 888-bytebox Stamping Tooling Packaging/Shipping Supplies Alliance Packaging______ 206-445-5898- Dayton Lamina._________ 708-203-6684

Spinetti Machinery_______ 775-996-3770 THINBIT_____________ 888-844-6248 Von Ruden Manufacturing, Inc._763-682--3122 Western Sintering________509-375-3096 Vises & Vise Jaws

Streamingteacher.com DISIGN FOR MANUFACTURABILITY

3-D Plastics, Inc.________ 503-720-0572 RyansDovetails.com_______ 253-876-9981 DOOR SYSTEMS Workholding Automatic Door opening Systems Applications Specialities_____253-872-0305 Cycle Time Solutions______ 510-708-8665 Midaco Corporation______ 847-593-8420 ENGINEERING/DESIGN Innovative Tool Sales______ 714-780-0730 Mechanical Design MESCO_______________626-303-5680 Creative Aero Engineering____ 562-443-7566 APPRENTICESHIPS & TRAINING Aerospace & Advanced Manufacturing Apprenticeships AJAC_______________206-737-8342 Machining Apprenticeships AJAC_______________206-737-8342 Precision Metal Fabrication Apprenticeships AJAC_______________206-737-8342 Training & Education AJAC_______________206-737-8342 BANKING

Support Stands Parts Washing Equipment Lucy’s Machine Company____ 323-587-6162 Ebbco Inc____________800-809-3901 Threading Polycrystalline Diamond (PCD) THINBIT_____________ 888-844-6248 Fullerton Tool Company_____303-478-3497 Tooling Pins & Bushings Power Tools Dayton Lamina._________ 708-203-6684 Ingersoll Rand_________ 206-472-0826 Tool Sharpening (Grinding) Precision Bearings Applications Specialities_____ 253-872-0305 C & M Precision Spindle, Inc.__ 503-691-0955 Swift Tool Co, Inc.________ 800-562-0900 Probing Systems Tooling Systems Sherpa Design_________ 503-771-3570 Applications Specialities_____ 253-872-0305 Quick Turn Financial______ 415-608-5692 Profiling THINBIT_____________ 888-844-6248 Punch Die Tooling Dayton Lamina._________708-203-6684

CNC PROGRAMING TRAINING

ERP SOFTWARE VIision 33____________206-456-5185 Business Management Software Solutions VIision 33____________206-456-5185 FINANCING Pacific Continental Bank____503-310-3604 U.S. Bank Equipment______800-810-0038 FORK LIFTS Bixby Machine Tool Supply___509-534-1208

GARNET Bilz USA_____________ 224-563-7233 Pacific Continental Bank____ 503-310-3604 GMA Garnet Group ______ 832-243-9300 GRINDING Cycle Time Solutions______ 510-708-8665 U.S. Bank Equipment______ 800-810-0038 Grinding Filtration BUSINESS MANAGEMENT Horizon Carbide_________ 602-524-3802 S.L. Fusco San Leandro_____ 510-895-9000 SOFTWARE SOLUTIONS Rosco Precision Machinery___ 253-333-2439 RyansDovetails.com_______ 253-876-9981 Creative Aero Engineering_____562-443-7566 S.L. Fusco R. Dominguez____ 310-868-1010 S.L. Fusco San Leandro_____ 510-895-9000 Vision 33 _______ 303-937-6543 Ext. 353 S.L. Fusco National City_____ 619-477-7733 Grinding Machines CAD TRAINING S.L. Fusco R. Dominguez____ 310-868-1010

Safety Products US Shop Tools__________800-243-7701 Saw Blades & Replacement Parts Rocky Mountain Saw Blades_ 303--761-3000 S.L. Fusco National City_____ 619-477-7733 Creative Aero Engineering_____562-443-7566 Bixby Machine Tool Supply___ 509-534-1208

A2Z MANUFACTURING WEST COAST •

42 • AUG - SEPT ‘19

Carlos R. Lugo Sales Manager

NORTH WESTERN - MAC H I ~_ E R Y ,

,-

'"

(206) 583-2333 Fax (206) 583-0698 Cell (206) 898-6900 clugo@nwmachinery.org

1222 S. Weller St. Seattle, WA 98144 www.nwmachinery.org

Michael McSWEENEY

Sales Manager

Ph: +1 724 696 4340 x3437 Direct: +1 724 213 7290 Cell: +1 724 309 1940 mcsweeney.michael@rotarex.com

ROTAREX NORTH AMERICA

101 Bilby Rd, Building #2 Hackettstown, NJ 07840 www.rotarexfiretec.com

CHARLIE TAYLOR 15600 NE 8th, Ste B-1, #162 | Bellevue, WA 98008 Office: 425.881.1200 | Cell: 503.781.2327 | ctaylor@pmtnw.com www.pmtnw.com

CMM Probes Desert EDM____________480-816-6300 Hexagon_ _ ___________ 206-304-3847 Ellison Technologies_______ 206-669-3578 CNC Controls & Retro Fits OGP ______________ 480-889-9056 Gosiger In WA__________ 937-586-5067 Rosco Precision Machinery___ 253-333-2439 Zeiss Industrial Metrology___800-327-9735 Gosiger In CA__________ 714-446-7770 CNC Lathes Coordinate Measuring Mach.

KNUTH Machine Tools______ 847-415-3333 Chevalier USA__________ 562-903-1929 Hexagon_ _ ___________ 206-304-3847 Machine Toolworks_______ 800-426-2052 CNC Machine Services______ 206-999-3232 North-South Machinery_____ 562-690-7616 OGP ______________ 480-889-9056 Desert EDM____________480-816-6300 North Western Machinery____ 206-583-2333 Zeiss Industrial Metrology___800-327-9735 Ellison Technologies_______ 206-669-3578 Laser Trackers Performance Machine Tools___ 510-249-1000 Gosiger In WA__________ 937-586-5067 Metrology Instruments Sharp Machine Tool_______ 310-944-8016 Hexagon_____________ 206-304-3847 Gosiger In CA__________ 714-446-7770 Guard & Vacuum Pedestals For OGP ______________ 480-889-9056 King Machine Inc.________ 509-435-6741 Grinders Zeiss Industrial Metrology___800-327-9735 KNUTH Machine Tools______ 847-415-3333 Midaco Corporation_______847-593-8420 Machine Toolworks_______ 800-426-2052 Optical Comparators Sharp Machine Tool_______ 310-944-8016 Hexagon_____________ 206-304-3847 Methods Machine Tools Inc.___ 714-292-9384 Grinders, Rotary OGP ______________ 480-889-9056 North-South Machinery______562-690-7616 CNC Machine Services______ 425-788-4500 Zeiss Industrial Metrology_800-327-9735 North Western Machinery____ 206-583-2333 Silicon & Quartz Romi Machine Tools, Ltd_____ 480-510-4146 Particle Inspection Mach DCM Tech ____________ 800-533-5339 DCM Tech ____________ 800-533-5339 Rosco Precision Machinery___ 253-333-2439 Punch & Die Santa Cruz Electronics______ 831-479-5444 INSURANCE INSPECTION EQUIP Selway Machine Tool______ 503-314-3165 Business Insurance Solutions Hexagon_____________ 206-304-3847 Sentry Insurance________ 877-373-6879 Selway Machine Tool______ 425-931-1680 King Machine Inc.________ 509-435-6741 MACHINERY/MACHINE TOOLS Selway Machine Tool______ 925-699-2522 OGP ______________ 480-889-9056 Additive Manufacturing Sharp Machine Tool_______ 310-944-8016 Rosco Precision Machinery___ 206-818-6813 3D Machines Spinetti Machinery_______775-996-3770 S.L. Fusco San Leandro_____ 510-895-9000 Gosiger In WA__________ 937-586-5067 Summit Machine Tool______ 800-654-3262 S.L. Fusco R. Dominguez____ 310-868-1010 Gosiger In CA__________ 714-446-7770 CNC Lathes-Big Bore S.L. Fusco National City_____ 619-477-7733 Production Machine Tools, Inc._ 425-881-1200 Ganesh Machinery_______ 818-349-9166 Swift Tool Co, Inc._______ 800-562-0900 Boring Mills 3 , 4, & 5 Axis CNC Mills Zeiss Industrial Metrology___800-327-9735 Rosco Precision Machinery___ 253-333-2439 Desert EDM____________480-816-6300 3D CAD for CMM Bridgeport Parts Ellison Technologies_______ 206-669-3578 Hexagon_____________ 206-304-3847 CNC Machine Services______ 425-788-4500

Ganesh Machinery_______ 818-349-9166 Gosiger In WA__________ 937-586-5067 King Machine Inc.________ 509-435-6741 Machine Toolworks_______ 800-426-2052 Methods Machine Tools Inc.___ 714-292-9384 North-South Machinery_____ 562-690-7616 North Western Machinery____ 206-583-2333 Production Machine Tools, Inc._ 425-881-1200

Rosco Precision Machinery___ 253-333-2439 Selway Machine Tool_______503-314-3165 Selway Machine Tool______ 425-931-1680

Selway Machine Tool______ 925-699-2522 CNC 3 & 5 Axis Routing Machines Ellison Technologies_______ 206-669-3578 CNC Slant Bed Turning Centers

Ganesh Machinery_______ 818-349-9166 CNC Swiss Turn Machines Ellison Technologies_______ 206-669-3578 Gosiger In WA__________ 937-586-5067 Gosiger In CA__________ 714-446-7770

King Machine Inc.________ 509-435-6741 LMI Machinery Inc.________ 866-437-7315 Machine Toolworks________800-426-2052

Methods Machine Tools Inc.___ 714-292-9384 North-South Machinery______ 562-690-7616 North Western Machinery_____206-583-2333 Custom Design/Build Machines Lambie Engineering________509-868-3100 Dot Peen Markers Kwik Mark Inc__________ 815-363-8268 Exclusive provider of OKUMA

Michael Garver Sales Manager

GOSIGER NORTHWEST 21911 68TH Ave South Kent, WA 98032 T 253.826.3921 C 253.508.4771 E michael.garver@gosiger.com www.gosiger.com

A2Z MANUFACTURING WEST COAST •

43 • AUG - SEPT ‘19

The Industry’s Most Trusted Source to Buy, Sell, and Trade-In Used CNC, Plastics, and Sheet Metal Fabrication Machinery.

800.922.1674 • Purchase/Resale-Individual Machines/Entire Plants • Auctions • Certified Appraisal Services • Asset repossession and disposition services.

• Finance - leases, loans - working capital lines

7918 E. MCCLAIN DR., STE 101, SCOTTSDALE, AZ 85260

EDM Automation

Fry Steel____________800-423-6651

Methods Machine Tools Inc.___ 714-292-9384

Gorilla Metals Inc.________855-516-3825

Sharp Machine Tool_______ 310-944-8016

Industrial Metal Supply Co.___818-729-3333

EDM Die Sinking Machines

Ryerson Corporation______425-204-2601

Desert EDM___________ 480-816-6300

Sunshine Metals_________760-579-8327

Methods Machine Tools Inc.___ 714-292-9384 EDM Filtration EDM Network__________ 480-836-1782

Methods Machine Tools Inc.___ 714-292-9384

Milling Machines (CNC )

Fahey Machinery Co., Inc.___503-620-9031

Aluminum Extrusions Aluminum Precision______ 805-889-7569

CNC Machine Services______ 206-999-3232 KNUTH Machine Tools______ 847-415-3333 Bralco_____________ 602-722-3324 Rosco Precision Machinery___ 253-333-2439 North-South Machinery_____ 562-690-7616 Armor:Commercial Jig Boring

North Western Machinery____206-583-2333 Kloeckner Metals_______ 480-389-2883 Methods Machine Tools Inc.___ 714-292-9384 Performance Machine Tools___ 510-249-1000 Service Steel__________ 503-224-9500 CNC Machine Services______ 206-999-3232 Lathes Rocky Mountain Saw Blades__303-761-3000 Armor: Military Grade Current EDM, Inc. _________612-840-0037 Bixby Machine Tool Supply___ 509-534-1208 Rosco Precision Machinery___ 206-818-6813 Kloeckner Metals_______ 480-389-2883 Desert EDM___________ 480-816-6300 CNC Machine Services______ 206-999-3232 Saw Replacement Parts Service Steel__________ 503-224-9500 EDM Network__________ 480-836-1782 CNC Machine Services______ 206-999-3232 Desert EDM____________480-816-6300 Brass KNUTH Machine Tools______ 847-415-3333 King Machine Inc._________509-435-6741 Rocky Mountain Saw Blades__ 303-761-3000 Bralco_____________ 602-722-3324 Methods Machine Tools Inc.___ 714-292-9384 Rosco Precision Machinery___ 253-333-2439 SawBlade.com_________ 800--240-2932 Coast Aluminum_________877-398-6061 North-South Machinery_____ 562-690-7616 Saws Spinetti Machinery_______775-996-3770 Coastal Metals__________800-811-7466 EDM Drilling & Micro Hole Summit Machine Tool______800-654-3262 Fahey Machinery Co., Inc.___ 503-620-9031 Fry Steel_____________800-423-6651 Machines Laser Marking Machines King Machine Inc.________ 509-435-6741 Gorilla Metals Inc.________855-516-3825 CNC Machine Services______ 206-999-3232 Spinetti Machinery_______775-996-3770 Production Machine Tools, Inc._ 425-881-1200 Industrial Metal Supply Co.___818-729-3333 Current EDM, Inc. _________612-840-0037 Manual Mills And Lathes Sub Spindle Lathes Ryerson Corporation______425-204-2601 Methods Machine Tools Inc.___ 714-292-9384 Ganesh Machinery_______818-349-9166 Rosco Precision Machinery___ 253-333-2439 Sequoia Brass & Copper___ 800-362-5255 EDM Service KNUTH Machine Tools______ 847-415-3333 Bronze Swiss Screw Machines EDM Network__________ 480-836-1782 Machine Toolworks_______ 800-426-2052 Spinetti Machinery______ 775-996-3770 Coastal Metals__________800-811-7466 EDM Tooling Systems North Western Machinery____ 206-583-2333 Turning Centers Sequoia Brass & Copper___ 800-362-5255 Desert EDM___________ 480-816-6300 Sharp Machine Tool_______ 310-944-8016 CNC-PROS____________ 602-344-9753 Carbon Steel EDM Network__________ 480-836-1782 Summit Machine Tool______800-654-3262 Used Wire EDM Machines Bralco_____________ 602-722-3324 Equipment Financing Swift Tool Co, Inc._______ 800-562-0900 Current EDM, Inc. ________ 612-840-0037 Coastal Metals__________800-811-7466 Pacific Continental Bank____ 503-310-3604 Parts Washing Desert EDM___________ 480-816-6300 Fry Steel_____________800-423-6651 EDM Machines

Scottrade Bank Equip. Finance__206-948-0022 Gosiger_____________ 937-586-5067 EDM Network__________ 480-836-1782 Robotics & Automatics MATERIAL U.S. Bank Equipment______ 800-810-0038

Ganesh Machinery______818-349-9166

Aluminum Bralco______________602-722-3324 Sawing Machines Ellison Technologies_______ 206-669-3578 CNC Machine Services______ 206-999-3232 Bixby Machine Tool Supply___509-534-1208 Coast Aluminum_________ 877-398-6061 CNC Machine Services______ 206-999-3232 DIX Metals____________ 714-677-0788 Horizontal Boring & Gantry & Bridge Systems

www.SwiftTool.com

A2Z MANUFACTURING WEST COAST •

44 • AUG - SEPT ‘19

Laser Cutting Services, Inc___ 503-612-8311 Ryerson Corporation______425-204-2601 Cobalt Alloys United Performance Metals_ _888-282-3292 Copper Bralco_____________ 602-722-3324

Richard Amy Regional Sales Manager

BARTON INTERNATIONAL

10457_IMS_BC_8up_front_shells.pdf

11/10/10

11:48:58 AM

cell 951.551.2685 sales 800.741.7756 ramy@barton.com www.barton.com

Coast Aluminum_________877-398-6061 Gorilla Metals Inc.________855-516-3825

8300 San Fernando road Sun Valley, Ca 91352

Industrial Metal Supply Co.___818-729-3333

MONday - frIday 7:00 aM to 5:00 PM saTurday 8:00 aM to 2:00 PM

Ryerson Corporation______425-204-2601

PHONE (818) 729-3333 fax (818) 729-3377 suNvallEy@IMsMETals.COM www.INdusTrIalMETalsuPPly.COM

Sequoia Brass & Copper___ 800-362-5255 Electrical Steels Fry Steel_____________ 800-423-6651 High Temperature Alloys Altemp Alloys__________ 800-227-8103

Bralco______________ 602-722-3324

Jorgensen Machine Tools____ 800-952-0151

DIX Metals____________ 714-677-0788 North-South Machinery______ 562-690-7616 Band & Cut Off Saws Fry Steel_____________ 800-423-665 C

Metal Marking Systems Kwik Mark Inc__________ 815-363-8268 Swift Tool Co, Inc._______ 800-562-0900 8300 San Fernando road Sun Valley, Ca 91352

Notchers Gorilla Metals Inc.________ 855-516-3825 Fahey Machinery Co., Inc.____ 503-620-9031 United Performance Metals__ _888-282-3292 Fahey Machinery Co., Inc.___ 503-620-9031 Industrial Metal Supply Co.___818-729-3333 Icon Machine Tool, Inc. ______360-434-8844 Laser Cut Material Plasma/Gas Cutting Tools/Systems Kloeckner Metals________480-389-2883 KNUTH Machine Tools_______ 847-415-3333 Laser Cutting Services, Inc____503-612-8311 Fab - Line Machinery______ 206-972-6215 Laser Cutting Services, Inc___ 503-612-8311 North-South Machinery______ 562-690-7616 Lead KNUTH Machine Tools______ 847-415-3333 North Western Machinery_____ 206-583-2333 8300 San Fernando road Industrial Metal Supply Co.___ 818-729-3333 Ryerson Corporation______ 425-204-2601 Rosco Precision 253-333-2439 Sun Valley,Machinery___ Ca 91352 Production Machine Tools, Inc.__425-881-1200 United Performance Metals_ _ _888-282-3292 Material Sales Plate Bending & Rolls Titanium Plate, Rod, Bar, & Wire Revolution Machine Tools_____ 385-355-0316 Altemp Alloys__________ 800-227-8103 Fahey Machinery Co., Inc.___ 503-620-9031 Coast Aluminum_________ 877-398-6061 Bralco______________ 602-722-3324 Rosco Precision Machinery____253-333-2439 Jorgensen Machine Tools____ 800-952-0151 CNC Turret Punches Coastal Metals__________ 800-811-7466 Laube Technology________888-355-2823 Plasma/Gas Cutting Systems Fry Steel_____________ 800-423-6651 United Performance Metals__ _888-282-3292 Muratec______________949-466-8255 Production Machine Tools, Inc._ 425-881-1200 8300 San Fernando road Drill Lines Tool Steel Sun Valley, Ca 91352 Kloeckner Metals________ 480-389-2883 Power Tools DIX Metals_ _ __________ 714-677-0788 Fahey Machinery Co., Inc.____ 503-620-9031 United Performance Metals__ _888-282-3292 Icon Machine Tool, Inc. _____ 360-434-8844 M

Y

MONday - frIday 7:00 aM to 5:00 PM saTurday 8:00 aM to 2:00 PM

PHONE (818) 729-3333 fax (818) 729-3377 suNvallEy@IMsMETals.COM www.INdusTrIalMETalsuPPly.COM

MONday - frIday 7:00 aM to 5:00 PM saTurday 8:00 aM to 2:00 PM

PHONE (818) 729-3333 fax (818) 729-3377 suNvallEy@IMsMETals.COM www.INdusTrIalMETalsuPPly.COM

MONday - frIday 7:00 aM to 5:00 PM saTurday 8:00 aM to 2:00 PM

PHONE (818) 729-3333 fax (818) 729-3377 suNvallEy@IMsMETals.COM www.INdusTrIalMETalsuPPly.COM

CM

MY

CY

CMY

K

Metals: Bar & Plate

Industrial Metal Supply Co.___818-729-3333

Altemp Alloys__________ 800-227-8103

CNC MASTERCAM TRAINING

Fry Steel______________ 800-423-665

Streamingteacher.com METROLOGY PRODUCTS

Ryerson Corporation______ 425-204-2601

Sequoia Brass & Copper____ 800-362-5255 Hexagon_____________ 206-304-3847

Cold Saws/Saws Fahey Machinery Co., Inc.___ _503-620-9031

Icon Machine Tool, Inc. OR___ 503-887-1003

Presses Hydmech Sawing Solutions____ 714-620-5560 Bixby Machine Tool Supply___509-534-1208 KNUTH Machine Tools_______ 847-415-3333 Press Brakes Hardware Insertion

Fahey Machinery Co., Inc.___ 503-620-9031 Fahey Machinery Co., Inc.____ 503-620-9031 Sunshine Metals_________ 760-579-8327 Rosco Precision Machinery___ 253-333-2439 North-South Machinery______562-690-7616 Iron Workers Production Machine Tools, Inc._ 425-881-1200 United Performance Metals__ _888-282-3292 Metrology Hardware Fahey Machinery Co., Inc.____ 503-620-9031 Revolution Machine Tools____ 385-355-0316 Nickel Alloys Hexagon_____________ 206-304-3847 Altemp Alloys__________ 800-227-8103

Jorgensen Machine Tools_____ 800-952-0151

Punches Fry Steel_____________ 800-423-6651 Hexagon_____________ 206-304-3847 Production Machine Tools, Inc.__425-881-1200 Fahey Machinery Co., Inc.___ 503-620-903 Revolution Machine Tools_____ 385-355-0316 Icon Machine Tool, Inc. _____ 360-434-8844 United Performance Metals__ _888-282-3292 Portable Metrology Laser & Fiber Laser Machines Plate: Wear and Structural Icon Machine Tool, Inc. OR___ 503-887-1003 Hexagon_____________ 206-304-3847 Metrology Software

Fahey Machinery Co., Inc.____ 503-620-9031 Revolution Machine Tools____ 385-355-0316 Ryerson Corporation______ 425-204-2601 Hexagon_____________ 206-304-3847 North-South Machinery______ 562-690-7616 Rolling Machines Production Machine Tools, Inc.__425-881-1200 United Performance Metals__ _888-282-3292 Fahey Machinery Co., Inc.___ 503-620-9031 Metrology Maintenence

Kloeckner Metals________ 480-389-2883

Metrology Scanners

Hexagon_____________ 206-304-3847 Revolution Machine Tools_____ 385-355-0316 Revolution Machine Tools____ 385-355-0316 DIX Metals____________ 714-677-0788 Shearing Machines Magnetic Drills/Cutters NEW MACHINERY

Precision Ground Flat

Innovative Tool Sales_______714-780-0730

Fab - Line Machinery______ 206-972-6215 Material Handling Systems Ryerson Corporation______ 425-204-2601 Production Machine Tools, Inc._ 425-881-1200 Fahey Machinery Co., Inc.___ 503-620-9031 Hydmech Sawing Solutions____ 714-620-5560 Stainless Steel & Steel Icon Machine Tool, Inc. _____ 360-434-8844 Fahey Machinery Co., Inc.___ 503-620-9031 Sheet & Coil

FABRICATION

A2Z MANUFACTURING WEST COAST •

45 • AUG - SEPT ‘19

North-South Machinery______562-690-7616

Bar Feeder Repair

Revolution Machine Tools____ 385-355-0316 Edge Technologies_______ 951-440-1574

Cimatron________ 248-596-9700 ext. 237

Waterjet Hoppers

Delcam______________ 877-335-2261 GMA Garnet Group _______ 832-243-9300

Sign & Graphic Cutting Solutions

ROBOTICS

Sherpa Design__________ 503-771-3570

Perry Pallet Co.________ 360-366-5239 Wood Pallets

SAWS

Great Western Registrar______ 623-580-1881

Waterjet Replacement Parts NDT III Consulting Services Barton International______ 800-741-7756 Tooling Ellison Technologies________206-669-3578 Fahey Machinery Co., Inc.___ 503-620-9031 LMI Machinery Inc.________866-437-7315 Level III NDT Svcs_________ 602-578-8109 dtiEXACT_____________ 360-866-1337 Welding Equipment EDM Performance________ 800-336-2946 Ready-Robotics__________833-732-3967 SPINDLES & SLIDES Rocky Mountain Saw Blades__ 303-761-3000 Olympus Controls_________503-582-8100 GMA Garnet Group _______ 832-243-9300 Spindle Rebuilding/Repair PALLET SYSTEMS WOOD PRODUCTS Robotic Part Loading Systems C & M Precision Spindle, Inc.___ 503-691-0955 Manual & Automatic Midaco Corporation_______ 847-593-8420 GMN USA LLC___________ 800-686-1679 Perry Pallet Co.________ 360-366-5239 Pallet Systems Ready-Robotics__________833-732-3967 CUTTING TOOLS Spindle Sales New Midaco Corporation_______847-593-8420 Olympus Controls_________503-582-8100 Custom Tools C & M Precision Spindle, Inc.___ 503-691-0955 Manual Lift Off Pallet ROUTERS GMN USA LLC___________ 800-686-1679 Perry Pallet Co.________ 360-366-5239 Systems Rosco Precision Machinery____253-333-2439 WORK HOLDING PRODUCTS TRAINING Midaco Corporation______ 847-593-8420 Custom Tools SAFETY Six Sigma Training Manual Rotory Pallet Systems 5th Axis____________ 858-616-7373 Fire Protection Systems Sustaining Edge Solutions_____888-572-9642 Midaco Corporation______ 847-593-8420 Rotarex North America_____ 480-689-8756 ISO Consulting/Registration Shipping Solutions

Perry Pallet Co.________ 360-366-5239 PRECISION TOOLHOLDING PRODUCTS Tooling Von Ruden Manufacturing, Inc._763-682--3122 Tooling Systems

Lean and NADCAP Consulting

Swift Tool Co, Inc.________800-562-0900

Training

SERVICES

Level III NDT Svcs_________ 602-578-8109 ISO / AS9100 Certification

AS9100 Registration

BMSC_______________ 602-445-9400

Great Western Registrar______623-580-1881 Custom Packaging/Shipping Supplies Alliance Packaging_______ 206-445-5898-

Von Ruden Manufacturing, Inc._763-682--3122 PRODUCTIVITY

Productivity Tools and Systems Scout Systems_ _________253-329-2460 PROG. SYSTEMS Factory Automation/Logistics North-South Machinery______ 562-690-7616

CAD/CAM Software, CAD Applied CAx___________ 503-962-0287 Automatics & Machinery Co.__303-990-6190 MRP Software SigmaTEK____________ 513-595-2022 Nesting Software SigmaNEST___________ 513-595-2022 Software, Solid Modeling Delcam Software________ 877-DELCAM1 PROTOTYPE MACHINERY Santa Cruz Electronics______ 831-479-5444 REPAIR CNC-PROS____________ 602-344-9753 A2Z MANUFACTURING WEST COAST •

Band & Cut-Off Saws

46 •

Productivity Training Scout Systems___________253-329-2460

USED MACHINERY Engineering/Mechanical Design Sherpa Design__________ 503-771-3570 EDM Network_ __________480-836-1782 Jorgensen Machine Tools_____ 800-952-0151 Financial Services K.D. Capital Equipt________ 480-922-1674 Intech Funding_________ 800-553-9208 North Western Machinery_____ 206-583-2333 Quick Turn Financial_______415-608-5692 Performance Machine Tools ___ 510-760-9518 Machine Tool Rebuilding Resell CNC_____________ 844-478-8181 EDM Network___________480-836-1782 ZACHMAN MachineRY INC. ____ 602-908-3447 Management Systems Training WATERJET CUTTING BMSC_______________ 602-445-9400 Fahey Machinery Co., Inc._____ 503-620-9031 Level III NDT Svcs_________602-578-8109 Flow Internatil___________ 909-620-5707 Sustaining Edge Solutions____ 888-572-9642 King Machine Inc._________ 509-435-6741 Supply Chain Assessments Machine Toolworks________ 800-426-2052 Sustaining Edge Solutions____ 888-572-9642 Waterjet & Blast Abrasives, SOFTWARE CAD CAM Garnetentury Machining Barton International_______800-741-7756 Applied CAx____________503-962-0287 Cimatron________ 248-596-9700 ext. 237 GMA Garnet Group _______ 832-243-9300 Solid Products__________ 480-206-0330 Waterjet Bricks Spinetti Machinery_______ 775-996-3770 Barton International_______800-741-7756 Mechanical Design AUG - SEPT ‘19

Kim@A2Zmanufacturing.com

Sustaining Edge Solutions_____888-572-9642

GMA Garnet Group ________ 832-243-9300

The Buyers Guide Reaches Over 14,000 Decision Makers In The West Coast Region WA, OR, & CA! What you get: FREE PR and 6 Categories with your company name and Phone # Only $260 For A Full Year!

Call Now For More Information!

480-773-3239 Kim@A2ZManufacturing.com

Buyer’s Guide & Card Gallery Processes

The Manufacturer’s Secret Weapon

3D TOOLS 3D Printing Proto & Production NW Rapid Mfg._________ 503-434-85577

Tube and Pipe Bending

Investment Casting-Precision

Tool & Dies

Albina Co., Inc. _________ 866-252-4628 Dolphin Investment Castings___ 602-272-6747 Micropulse West Inc.________480-966-2300 BRAZING-JOINING

Precision Enterprises Inc._____851-797-1000

DEBURRING

3D Scanning

Cogitic_______________719-473-8844 Industrial Precision Grinding__ 310-352-4700 CHEMICAL ETCHING NW Rapid Mfg.__________ 503-434-8557 dtiEXACT______________360-866-1337 EDGING CMR Manufacturing________602-273-0943 SLS (Selctive Laser Sintering) Evans Precision__________623-582-4776 PAS Technologies_________602-744-2600 United Performance Metals__ _888-282-3292 ASSEMBLIES

PAS Technologies________ 602-744-2600

Petersen Inc.____________801-732-2000 Precision Casting Repair______801-972-2345 Systems Integrators ________623-434-3136 Brazing: BENDING Bolts Metalizing-CWST______602-244-2432 Mandrel Albina Co., Inc. __________866-252-4628 Bending Solutions, Inc.______360-651-2443 Aeroform, Inc. __________ 360-403-1919 Speciality Bending Albina Co., Inc. __________866-252-4628

Bending Solutions, Inc._____ 360-651-2443 Structrual Bending

BROACHING Evans Precision__________623-582-4776 Ponderosa Ind____ _______303-298-1801 Specialty Steel Services______801-539-8252 CABLE ASSEMBLIES

EDM

COATING Bolts Metalizing-CWST______602-244-2432

Albina Co., Inc. __________866-252-4628 Precision Enterprises Inc._____851-797-1000

/Filtration

CUTTING

Ebbco Inc_____________ 586-716-5151

Bar & Plate & Die Cutting

EDM: Drilling Small Hole

AZ Tool Steel____________877-795-1600 Layke Inc.____________ 602-272-2654 Industrial Precision Grinding___ 310-352-4700 Precision Aerospace, LLC____ 602-352-8658 EDM: Ram-Type (Sinking) Systems Integrators ________623-434-3136

Micropulse West, Inc.______ 480-966-2300

DIE CASTING

Cascade Systems Technology___971-330-8054 SMH Inc LLC____________360-341-2226 CASTING

EDM: Dialectric Systems

TVT Die Casting__________800-280-2278 DIES

Milco Wire EDM,, Inc._______714-373-0098

Precision Aerospace, LLC____ 602-352-8658 Stevens Tool & Die_________503-682-3185 EDM Solutions

A2Z MANUFACTURING WEST COAST •

47 •

AUG - SEPT ‘19

EDM: Wire

Precision Aerospace, LLC____ 602-352-8658 Precision Aerospace, LLC_____ 602-352-8658

Liquid Painting

Clings Aerospace_________480-968-1778 QUAL-FAB, Inc.___________206-762-2117 QUAL-FAB, Inc.____________206-762-2117 Aero Tech MFG__________ 801-891-2740 Evans Precision__________623-582-4776 SMH Inc LLC___________ 360-341-2226 SMH Inc LLC____________ 360-341-2226 Frontier Group__________602-437-2426 Micropulse West, Inc.______ 480-966-2300 Weiser Engineering_______ 303-280-2778 Solid Form Fabrication______ 503-435-1400 MPI International________ 956-631-6880 Milco Wire EDM,, Inc._______714-373-0098

Fabrication: Custom Metal

Weiser Engineering________ 303-280-2778 PAS Technologies________ 602-744-2600

Micropulse West, Inc.______ 480-966-2300 EZ-ACCESS____________ 800-258-8503 Passivation Tube & Pipe Bending Fabrication Plastic Injection Molding______509-531-2634 Group Mfg Serv_________ 480-966-3952 Albina Co., Inc. __________ 866-252-4628 Coating Technologies_____ _623-581-2648 Precision Aerospace, LLC____ 602-352-8658 Industrial Machine Svcs_____ 503-240-0878 Bending Solutions, Inc.______ 360-651-2443 Frontier Group__________602-437-2426

Stevens Tool & Die_________503-682-3185 Petersen Inc.___________ 801-732-2000 EZ-ACCESS_____________ 800-258-8503 Gold Tech Industries_______ 480-968-1930 ELECTRO MECHANICAL Precision Aerospace, LLC____ 602-352-8658 Polishing FINISHING Sub-Assembly Builds QUAL-FAB, Inc.___________206-762-2117 Advanced Precision Anodizing___ 503-661-6700 Arizona Hard Chrome______ 602-278-8671 Cascade Systems Technology___503-640-5733 SMH Inc LLC___________ 360-341-2226 Powder Coating Arizona Hard Chrome_______ 602-278-8671 ENGINEERING/DESIGN Weiser Engineering_______ 303-280-2778 Coating Technologies_______ 623-581-2648 Aero Tech MFG__________ 801-891-2740 Cascade Systems Technology___503-640-5733 Wrico______________ 480-892-7800 CLS Fabrication Inc_______ 800-426-0721 Gold Tech Industries________ 480-968-1930 Creative Aero Engineering_____562-443-7566 Forming & Fabrication Sandblasting PAS Technologies_________ 602-744-2600 Hexatron Engineering_______801-363-8010 Albina Co., Inc. _________ 866-252-4628 Real Axis Machining________ 360-723-5386 Byington Steel Treating, Inc.___ 408-727-6630 FABRICATION Bending Solutions, Inc._____ 360-651-2443 Shot Peen Titanium Coating Services_____ 562-548-2550 Architectural Forming & Fabrication EZ-ACCESS____________ 800-258-8503 PAS Technologies________ 602-744-2600 DRY FILM LUBRICATION Albina Co., Inc. _________ 866-252-4628 Petersen Inc.___________ 801-732-2000 Silk Screening Bolts Metalizing-CWST______602-244-2432 Precision Sheet Metal Fabrication: Fabrication: Sheet Metal Frontier Group__________602-437-2426 Arizona Finishing________ 602-438-4443 Medium & Large Aeroform, Inc. __________ 360-403-1919 Galvanizing: Hot Dip FIXTURING Aero Tech MFG___________ 801-891-2740 Aeroform, Inc. __________360-403-1919 TMM Precision __________ 800-448-9448 Real Axis Machining_______ 360-723-5386 CLS Fabrication Inc________800-426-0721 CLS Fabrication Inc_______ 800-426-0721 GASKETS Glass Bead Clean EZ-ACCESS____________ 800-258-8503 EZ-ACCESS____________ 800-258-8503 Byington Steel Treating, Inc.____ 408-727-6630 3-D Plastics, Inc._________ 503-720-0572 Gillaspie MFG___________360-921-3973 Gillaspie MFG__________ 360-921-3973 Coating Technologies_______ 623-581-2648 GRINDING NW Metalcraft Industries____ 888-280-7080 Group Mfg Serv_________ 480-966-3952

Mountain View Machine_____ 435-755-0500 Industrial Machine Svcs_____ 503-240-0878 Gold Tech Industries________ 480-968-1930 AZ Hard Chrome_________ 602-278-8671 Petersen Inc.____________801-732-2000 Petersen Inc.___________ 801-732-2000 PAS Technologies_________ 602-744-2600 AZ Tool Steel___________ 877-795-1600

A2Z MANUFACTURING WEST COAST

• 48 • AUG - SEPT ‘19

Shawn Carlin scarlin@gmsaz.com

Bourdelais Grinding Co., Inc.__ 805-583-9966

HEAT TREATING

INJECTION MOLDS

Ron Grob Co___________ 970-667-5320

Bolts Metalizing-CWST______602-244-2432

Plastic Injection Molding______509-531-2634

Sun Grinding__________ 602-238-9595

Byington Steel Treating_____408-727-6630

INJECTION MOLDING

Grinding, Double Disc

Controlled Thermal Tech_____602-272-3714

Plastic Injection Molding______509-531-2634

Bourdelais Grinding Co., Inc.__ 805-583-9966 Evans Precision__________623-582-4776 ChemResearch___________602-253-4175 Industrial Precision Grinding___310-352-4700 MET-TEK Heat Treating______503-519-9864 Cogitic_______________ 719-473-8844 Sun Grinding__________ 602-238-9595 PAS Technologies_________602-744-2600 Evans Precision__________623-582-4776 TCI Precision Metals________800-234-5613 Phoenix Heat Treating______602-258-7751 Industrial Machine Svcs______503-240-0878 Cryogenics Grinding: OD Industrial Precision Grinding___310-352-4700 Arizona Hard Chrome_______602-278-8671 Phoenix Heat Treating_______602-258-7751 Mountain View Machine_____ 435-755-0500 Heat Treating/ISO/AS9100 Bourdelais Grinding Co., Inc.__ 805-583-9966 Ron Grob Co____________970-667-5320 Bolts Metalizing-CWST______602-244-2432 Precision Tech__________ 801-285-7288 Steel Services Grinding______800-662-0126 Ron Grob Co___________ 970-667-5320 Byington Steel Treating______408-727-6630 Sun Grinding___________602-238-9595 Phoenix Heat Treating_______602-258-7751 Sun Grinding__________ 602-238-9595 Superior Grinding_________801-487-9700 Heat Treating/Aerospace Superior Grinding_________801-487-9700 TCI Precision Metals________800-234-5613 Byington Steel Treating______408-727-6630 Grinding: Surface Grinding, Blanchard Phoenix Heat Treating_______602-258-7751 AZ Tool Steel____________877-795-1600 Bourdelais Grinding Co., Inc.__ 805-583-9966 Large Capacity Drop Bottom Bourdelais Grinding Co., Inc.___805-583-9966 Industrial Precision Grinding___310-352-4700 Oven/Aluminum Diversified Metal Services_____801-972-6093 PAS Technologies________ 602-744-2600 Byington Steel Treating______408-727-6630 Superior Grinding_________801-487-9700 Evans Precision__________623-582-4776 MET-TEK Heat Treating______503-519-9864 Industrial Precision Grinding___310-352-4700 TCI Precision Metals________800-234-5613 HONING/LAPPING Grinding: Tool & Cutter Steel Services Grinding______800-662-0126 PAS Technologies_________602-744-2600 Sun Grinding___________602-238-9595 Superior Grinding_________888-487-9701 HYDRAULIC REPAIR

LASER CUTTING CLS Fabrication Inc________ 800-426-0721

dtiEXACT______________ 360-866-1337 Precision Aerospace, LLC_____602-352-8658 SW Waterjet & Laser________480-306-7748 United Performance Metals____888-282-3292 Weiser Engineering________303-280-2778 Wrico_______________480-892-7800 LASER MARKING Advanced Precision Anodizing___ 503-661-6700

Laser Cutting: 3D SW Waterjet & Laser________480-306-7748 LEVELING United Performance Metals____888-282-3292 MACHINING Cascade Engineering Tech ____503-266-1300 Clings Aerospace_________480-968-1778 Faustson______________303-420-7422 Grovtec US, Inc. __________503-557-4689

Superior Grinding_________801-487-9700 Swift Tool Co, Inc.________800-562-0900 Arizona Hard Chrome_______602-278-8671

Howard Precision Machine____ 801-619-9850

TCI Precision Metals________800-234-5613

Larkin Precision Machine_____831-438-2700

Grinding, Centerless

A2Z MANUFACTURING WEST COAST

GUN DRILLING

HYDRO FORMING

Evans Precision__________623-582-4776 Precision Aerospace, LLC____ 602-352-8658

• 49 • AUG - SEPT ‘19

Machinists Inc.___________360-202-7342

A2Z MANUFACTURING WEST COAST

• 49 • AUG - SEPT ‘19

Passivation, Electroless Nickel, Gold, Hard Chrome, Silver, & Tin Plating. 206-947-4052 geoffs@askogroup.com Petersen Inc.____________ 801-732-2000

Machining: Ceramics Advanced

Precision Aerospace, LLC_____602-352-8658 O’Keefe Ceramics_________ 719-687-0888 Portland Precision Manufacturing_503-253-6700 Real Axis Machining________360-723-5386 Ron Grob Co____________970-667-5320 SMH Inc LLC____________ 360-341-2226

Machining: Horizontal Boring Machinists Inc.___________360-202-7342 Machining: Proto-R & D

Cascade Engineering Tech ____503-266-1300 Sunshine Metals__________ 714-225-4972 Newport Tool.___________ 801-295-7411 Treske Precision Machining ____ 503-625-2821 Petersen Inc.____________ 801-732-2000 TVT Die Casting__________800-280-2278 Portland Precision Manufacturing_503-253-6700 VWeiser Engineering_______303-280-2778 Real Axis Machining________360-723-5386 Portland Precision Manufacturing_503-253-6700 Ron Grob Co____________970-667-5320 Real Axis Machining_______ 360-723-5386 Machining: 5-Axis SMH Inc LLC____________360-341-2226 Ron Grob Co___________ 970-667-5320 Accutech Machine Inc_______ 801-975-1117 Strom Manufacturing_______ 503-447-1021 Rickard Engineering ______ 866-845-8838 Cascade Engineering Tech ____503-266-1300 Systems Integrators ________ 623-434-3136 Savage Machining Inc.______805-584-8047 Clings Aerospace_________ 480-968-1778 Treske Precision Machining ____ 503-625-2821 SMH Inc LLC____________360-341-2226 Petersen Inc.____________ 801-732-2000 TVT Die Casting__________800-280-2278 Strom Manufacturing_______503-447-1021 Strom Manufacturing_______ 503-447-1021 Treske Precision Machining ____ 503-625-2821

Machining: CNC Milling

Accutech Machine Inc_______ 801-975-1117 Cascade Engineering Tech ____503-266-1300 dtiEXACT______________ 360-866-1337 Flex-Pro Manufacturing.______623-466-6866 Grovtec US, Inc. __________503-557-4689 Howard Precision Machined Prod._ 801-619-9850 Larkin Precision Machine_____831-438-2700

Sunshine Metals__________714-225-4972 Newport Tool.___________ 801-295-7411

Accutech Machine Inc_______ 801-975-1117 Systems Integrators _______ 623-434-3136 Petersen Inc.____________801-732-2000 Cascade Engineering Tech ____503-266-1300 Teton Machine _________ 208-642-9344 Portland Precision Manufacturing_503-253-6700 AATC________________ 602-268-1467 Clings Aerospace________ 480-968-1778 Treske Precision Machining ____503-625-2821 Strom Manufacturing_______503-447-1021 Alpha Precision Machining, Inc. __ 253-395-7381 dtiEXACT______________360-866-1337 Machining: Large Systems Integrators ________623-434-3136 dtiEXACT______________ 360-866-1337 Faustson______________ 303-420-7422 Accutech Machine Inc_______ 801-975-1117 Teton Machine __________208-642-9344 Flex-Pro Manufacturing.______ 623-466-6866 Flex-Pro Manufacturing.______ 623-466-6866 Alpha Precision Machining, Inc. __ 253-395-7381 Machining: Swiss Larkin Precision Machine_____831-438-2700 Gillaspie MFG___________ 360-921-3973 Cascade Engineering Tech ____503-266-1300 dtiEXACT______________ 360-866-1337 Layke Inc._____________602-272-2654 Grovtec US, Inc. __________ 503-557-4689 Petersen Inc.___________ 801-732-2000 Grovtec US, Inc. __________503-557-4689 Petersen Inc.____________ 801-732-2000 Howard Precision Machined Prod._ 801-619-9850 Howard Precision Machined Prod._ 801-619-9850 Machining: Medical Precision Aerospace, LLC_____602-352-8658 Larkin Precision Machine_____ 831-438-2700 Portland Precision Manufacturing_503-253-6700 Layke Inc._____________ 602-272-2654 Cascade Engineering Tech ____503-266-1300 Pacific Swiss & Manufacturing__503-557-9407 Strom Manufacturing_______ 503-447-1021 Machinists Inc.___________360-202-7342 Flex-Pro Manufacturing._____ 623-466-6866 Teton Machine __________208-642-9344 Petersen Inc.___________ 801-732-2000 SMH Inc LLC____________ 360-341-2226 NW Metalcraft Industries_____ 888-280-7080 Machining: Turning Portland Precision Manufacturing_503-253-6700 Systems Integrators ________ 623-434-3136 Micropulse West, Inc._______ 480-966-2300 Accutech Machine Inc_______ 801-975-1117 Teton Machine _________ 208-642-9344 Teton Machine __________208-642-9344 Petersen Inc.____________ 801-732-2000 dtiEXACT______________ 360-866-1337 Machining: Production Treske Precision Machining ____ 503-625-2821 Precision Aerospace, LLC_____602-352-8658 Faustson______________ 303-420-7422 Machining: Aerospace

A2Z MANUFACTURING WEST COAST

• 50 • AUG - SEPT ‘19

A2Z MANUFACTURING WEST COAST

• 50 • AUG - SEPT ‘19

Gold Tech _____________480-968-1930

Flex-Pro Manufacturing._____ 623-466-6866

Group Mfg Serv__________480-966-3952

Grovtec US, Inc. _________ 503-557-4689

Larkin Precision Machine_____831-438-2700 Advanced Mold Technology____714-990-0144 PAS Technologies_________ 602-744-2600

Howard Precision Machined Prod._801-619-9850

Petersen Inc.____________801-732-2000

Molds: Fast Turn Prototype and

Anodizing

Larkin Precision Machine____ 831-438-2700

Portland Precision Manufacturing_503-253-6700

Bridge Molds

Advanced Precision Anodizing___ 503-661-6700

Layke Inc.____________ 602-272-2654

Systems Integrators ________623-434-3136 Advanced Mold Technology____714-990-0144 Teton Machine __________208-642-9344 Molds: Expertise in Overmold and Treske Precision Machining ____ 503-625-2821 Insert Molding TVT Die Casting__________800-280-2278 Advanced Mold Technology____714-990-0144

Petersen Inc.___________ 801-732-2000 Portland Precision Manufacturing_503-253-6700 Real Axis Machining_______ 360-723-5386

Ron Grob Co___________ 970-667-5320

Industrial Manufacturing

=SMH Inc LLC___________ 360-341-2226

Albina Co., Inc. __________866-252-4628

Strom Manufacturing______ 503-447-1021

Machinists Inc.__________ 360-202-7342

Systems Integrators _______ 623-434-3136

Turnkey Product Services

Teton Machine _________ 208-642-9344

Aero Tech MFG___________ 801-891-2740

Machining: Ultra Precision

Pacific Swiss & Manufacturing_ 503-557-9407 Machining: Turning With Live Tooling Weiser Engineering_______ 303-280-2778 Machining: Turning Large Petersen Inc.___________ 801-732-2000 MANUFACTURING VALUE ADDED Contract Manufacturing AATC_______________ 602-268-1467

Custom Airplane to Marine Polishing

Molds: High Volume Class 100

ChemResearch___________ 602-253-4175 Frontier Group___________602-437-2426 Leadtek Plating__________ 503-682-4410 PAS Technologies_________ 602-744-2600

Black Oxide

PC BOARDS Surface Mount & Thru Hole Cascade Systems Technology___971-330-8054

PLASTIC MACHINING Portland Precision Manufacturing_503-253-6700

Metal Polishing By Timothy____503-253-5294

PAINTING

Personal Collectables Polishing

PAS Technologies_________602-744-2600

Metal Polishing By Timothy____503-253-5294

PLASTIC MOLDING

Production Polishing

3-D Plastics, Inc._________ 503-720-0572

Metal Polishing By Timothy____503-253-5294 Plastic Injection Molding_____ 509-531-2634 METALIZING

SMH Inc LLC___________ 360-341-2226

Controlled Thermal Tech _____ 602-272-3714

Mold Making

MOLDING: RUBBER

3-D Plastics, Inc._________ 503-720-0572

Molds: Plastic Injection

Plastic Injection Molding_____ 509-531-2634

Plastic Injection Molding_____509-531-2634

PLATING

PAS Technologies_________ 602-744-2600

Bright Tin Foresight Finishing________ 480-772-0387 Leadtek Plating__________ 503-682-4410 Precious Metal Plating Co._____ 800-481-6271 Chem Film Frontier Group___________602-437-2426 Savon Plating, Inc_________ 602-252-4311 PAS Technologies_________ 602-744-2600

Chromate\ Advanced Precision Anodizing___ 503-661-6700

Chrome/Nickel/Palladium/Teflon AZ Hard Chrome__________ 602-278-8671 EPSI________________ 714-519-9423

Alpha Precision Machining, Inc. _ 253-395-7381

Gold Tech _____________480-968-1930 SMH Inc LLC____________ 360-341-2226 Advanced Precision Anodizing___503-661-6700 Savon Plating, Inc_________ 602-252-4311 ASKO Group___________ 206-947-4052 MOLDS PAS Technologies_________ 602-744-2600

Bending Solutions, Inc._____ 360-651-2443

Aero Tech MFG__________ 801-891-2740 ChemResearch___________602-253-4175

CLS Fabrication Inc_______ 800-426-0721

Advanced Mold Technology___ 714-990-0144 EPSI________________714-519-9423

dtiEXACT_____________ 360-866-1337

Arizona Finishing________ 602-438-4443 Frontier Group__________ 602-437-2426

Flex-Pro Manufacturing._____ 623-466-6866

Milco Wire EDM,, Inc._______714-373-0098 Foresight Finishing________480-772-0387

G & G Custom Metal Fab____ 503-931-7069

Plastic Injection Molding_____ 509-531-2634 Leadtek Plating__________503-682-4410

Aeroform, Inc. __________360-403-1919 Albina Co., Inc. _________ 866-252-4628

A2Z MANUFACTURING WEST COAST

• 51 • AUG - SEPT ‘19

Savon Plating, Inc_______ 602-252-4311 Frontier Group__________ 602-437-2426 Pacific Tool, Inc__________ 425-882-1970

Coating

Electroless Nickel

Leadtek Plating_________ 503-682-4410 QUAL-FAB, Inc.___________ 206-762-2117

ASKO Group__________ 206-947-4052

PAS Technologies________ 602-744-2600 SpringWorks Utah_________ 801-298-0113

Gold Tech Industries______ 480-968-1930

Phosphate

Foresight Finishing______ 480-772-0387

Frontier Group__________ 602-437-2426

Leadtek Plating________ 503-682-4410

Shot Peen

Coating Technologies_______ 623-581-2648 Precious Metal Plating Co.____ 800-481-6271 Savon Plating, Inc________ 602-252-4311 Controlled Thermal Tech _____ 602-272-3714 PAS Technologies________ 602-744-2600 Coating: Black Oxide Glass Bead Clean Coating Technologies_______ 623-581-2648 PAS Technologies________ 602-744-2600 PAS Technologies_________ 602-744-2600 Gold Coating: Dry Film Lube ASKO Group___________ 206-947-4052 Coating Technologies_______ 623-581-2648 EPSI_______________ 714-519-9423 PAS Technologies_________ 602-744-2600 Foresight Finishing_______ 480-772-0387 Coating: Nickel/ Teflon/Chrome Gold Tech ____________ 480-968-1930 Coating Technologies_______ 623-581-2648 Leadtek Plating_________ 503-682-4410 Coating:Zinc & Mag.Phos.

Precious Metal Plating Co.____ 800-481-6271 Coating Technologies_______ 623-581-2648 PAS Technologies________ 602-744-2600 Leadtek Plating__________ 503-682-4410 Hard Chrome Savon Plating, Inc_________ 602-252-4311 Arizona Hard Chrome______ 602-278-8671 Copper ASKO Group___________ 206-947-4052 Gold Tech Industries________ 480-968-1930

NAD CAP & Boeing Approved

Foresight Finishing________ 480-772-0387

Processes

PAS Technologies________ 602-744-2600

Tin / Zinc Plate ASKO Group___________ 206-947-4052

Wrico_______________ 480-892-7800 PROCESSING: METAL Chemical LA Specialties___________ 602-269-7612 PROTOTYPES

EPSI________________714-519-9423 Cascade Systems Technology___ 503-640-5733 Gold Tech ____________ 480-968-1930 NW Rapid Mfg.__________ 503-434-8557 Leadtek Plating_________ 503-682-4410

PUNCHING

Savon Plating, Inc_________602-252-4311 AEI Fabrication__________ 480-733-6594 Silver Plating

CLS Fabrication Inc________ 800-426-0721

ASKO Group___________ 206-947-4052 Group Manufacturing Serv____ 480-966-3952 EPSI________________714-519-9423 QUAL-FAB, Inc.___________ 206-762-2117 Gold Tech ____________ 480-968-1930 Weiser Engineering________ 303-280-2778 Leadtek Plating_________ 503-682-4410

RECYCLING MATERIALS

PAS Technologies________ 602-744-2600

Aluminum, Brass, Copper, Nickel,

Precious Metal Plating Co._____800-481-6271

Plastics, Stainless Steel, Steel, Tin

Savon Plating, Inc_________602-252-4311 Metro Metals Northwest _____ 503-819-1284 Tin Plating

Bin Service

Precious Metal Plating Co._____800-481-6271 Metro Metals Northwest _____ 503-819-1284 Leadtek Plating_________ 503-682-4410

Excess Material Handling

Zinc Nickel

Metro Metals Northwest _____ 503-819-1284

Frontier Group___________ 602-437-2426 Gold Tech Industries_______ 480-968-1930 Electro-Polishing Foresight Finishing_______ 480-772-0387

PAS Technologies________ 602-744-2600

Full Service Scrap Management

ASKO Group____________ 206-947-4052 Leadtek Plating_________ 503-682-4410

G & G Custom Metal Fab____ 503-931-7069

Leadtek Plating__________ 503-682-4410 Precious Metal Plating Co.____ 800-481-6271

PRECISION FORMING

PAS Technologies_________ 602-744-2600 Precious Metal Plating Co.____ 800-481-6271

Drylube

Nickel-Bright

Embrittlement Relief

Passivation

EPSI________________ 714-519-9423 ASKO Group___________ 206-947-4052

A2Z MANUFACTURING WEST COAST

• 52 • AUG - SEPT ‘19

PLASMA CUTTING

Aeroform, Inc. __________360-403-1919

Metro Metals Northwest _____ 503-819-1284

Wood Products Perry Pallet Co.__________360-366-5239 REPAIR

Gillaspie MFG__________ 360-921-3973 CNC-PROS_____________ 602-344-9753

Bryan Crawford

1847 Elmfield Ave. Long Beach, CA, 90815 562-597-7824 cell: 562-243-4659 becrawford@mindspring.com

SALES SERVICE CONSULATION

ROLLING

Stamping:Flat Forming

Bending Solutions, Inc._____ 360-651-2443

Albina Co., Inc. _________ 866-252-4628

Gillaspie MFG__________ 360-921-3973 Clings Aerospace________ 480-968-1778

SANDBLASTING

NW Metalcraft Industries____ 888-280-7080 EZ-ACCESS____________ 800-258-8503

Advanced Precision Anodizing___503-661-6700

SpringWorks Utah_________801-298-0113

WATERJET CUTTING

Byington Steel Treating, Inc.___ 408-727-6630

Stamping: Light

Accutech Machine Inc_______801-975-1117

Welding: MIG-TIG Petersen Inc.____________ 801-732-2000

Evans Precision__________ 623-582-4776 EZ-ACCESS_____________800-258-8503

Production Sawing

Gillaspie MFG__________ 360-921-3973 Aeroform, Inc. __________ 360-403-1919

Bourdelais Grinding Co., Inc.__ 805-583-9966

SpringWorks Utah_________801-298-0113 dtiEXACT_____________ 360-866-1337

WIRE FORMING

SEWING

Systems Integrators _______ 623-434-3136 Milco Waterjet__________ 714-373-0098

Ace Wire & Spring Form______ 412-458-4830

Grovtec US, Inc. _________ 503-557-4689

Stamping: Production/

Precision Aerospace, LLC____ 602-352-8658

SHEARING

Precision

Rickard Engineering ______ 866-845-8838

United Performance Metals__ _888-282-3292

Precision Die & Stamping____ 480-967-2038 SW Waterjet & Laser_______ 480-306-7748

SIGNAGE & DISPLAYS

SUPPLY CHAIN MANAGEMENT

United Performance Metals__ _888-282-3292

Milco Wire EDM,, Inc.______ 714-373-0098

Cascade Systems Technology__ 503-640-5733

5-Axis Waterjet Cutting

SILICONE

TESTING

Rickard Engineering ______ 866-845-8838

3-D Plastics, Inc._________ 503-720-0572

Non-Destructive Testing

Micro-Machining

SINTERING

Frontier Group__________ 602-437-2426 Rickard Engineering ______ 866-845-8838

Western Sintering________ 509-375-3096

PAS Technologies________ 602-744-2600

SLITTING

Stress Relieving Testing

United Performance Metals__ _888-282-3292

Cogitic_______________719-473-8844

SPINNING

Thermal Shock Testing

Evans Precision__________623-582-4776

Cogitic_______________719-473-8844

SPLINES Specialty Steel Services_____ 801-539-8252 SPRINGS Ace Wire & Spring Form_____ 412-458-4830 SpringWorks Utah_________801-298-0113 SPRINGS: CUSTOM Extension/Compression/ Coil Ace Wire & Spring Form_____ 412-458-4830 STAMPING PRECISION

THERMAL SPRAY Bolts Metalizing-CWST______602-244-2432

Controlled Thermal Tech ____ 602-272-3714 THREAD ROLLING Ron Grob Co___________ 970-667-5320

TOOL & DIE DESIGN Newport Tool.___________801-295-7411 Wrico______________ 480-892-7800 TOOLING

WELDING Evans Precision_________ 623-582-4776 Frontier Group__________ 602-437-2426 Mountain View Machine_____ 435-755-0500 PAS Technologies________ 602-744-2600 Petersen Inc.___________ 801-732-2000

Precision Aerospace, LLC____ 602-352-8658 Weiser Engineering_______ 303-280-2778 Weld Metal Works________ 503-788-5701 Welding: Aluminum Medium & Large Petersen Inc.___________ 801-732-2000

NADCAP Welding and Services Level III NDT Svcs________ 602-578-8109

Industrial Machine Svcs_____ 503-240-0878

NW Metalcraft Industries____ 888-280-7080

Robotic Welding Mountain View Machine_____ 435-755-0500 Bending Solutions, Inc._____ 360-651-2443 Newport Tool.___________801-295-7411 Welding: Precision

Precision Die & Stamping____ 480-967-2038

Evans Precision_________ 623-582-4776

AEI Fabrication_________ 480-733-6594 Gillaspie MFG__________ 360-921-3973

Real Axis Machining_______ 360-723-5386

SpringWorks Utah_________801-298-0113

TUBE BENDING &

EZ-ACCESS____________ 800-258-8503

Stamping:Design

CUTTING FAB

Petersen Inc.___________ 801-732-2000

SpringWorks Utah_________801-298-0113

Evans Precision__________ 623-582-4776

Kim@A2Zmanufacturing.com

The Buyers Guide Reaches Over 14,000 Decision Makers In The West Coast Region WA, OR, & CA! What you get: FREE PR and 6 Categories with your company name and Phone # Only $260 For A Full Year!

Call Now For More Information!

480-773-3239 Kim@A2ZManufacturing.com

Albina Co., Inc. _________ 866-252-4628 Weiser Engineering_______ 303-280-2778 A2Z MANUFACTURING WEST COAST

• 53 • AUG - SEPT ‘19

Index of Advertisers 3D-Plastics...34,47

Ganesh...41

Portland Precision...50

5th Axis...41,56

Gillaspie...50

Precious Metals Plating...32,47

Accutech Machine, inc...51

GMA Garnet Group...12,42

Precision Aerospace, LLC...49

Ace Wire & Spring Form...52

GMN...37,42

Precision Die & Stamping...18,48

Advanced Precision Anodizing...49

Gold Tech...49

Precision-Enterprises...22,49

Aeroform, Inc...50

Gosiger in WA...42,43

Aero Tech Manufacturing...48

Gosiger in CA...42

Production Machine Tools...41,43

Albina Co, Inc...7,47

Group Manufacturing...48

Altemp Alloys...14, 44,45

Grovtec...27,47

Application Specialties Inc...40

Hangsterfers...40,42

Arizona Finishing...49

Hexagon Metrology...43

Asko Group...51

Hurco...33

Barton...28,45

Industrial Metal Supply Co....36,45

BC Bar Feeds...53

Industrial Precision Grinding...52

Bending Solutions...53

Ingersoll Rand...40,42

Bistronic...5

KD Capital...44

BMSC...30,40

Kloeckner Metals-Temtco...22,41

Bralco...44

Landmark Solutions...5,42

Buds Equipment Sales...42

Laube Titanium Mill Prod....45

Byington Steel Treating...49

Layke Inc...50

SMH Inc LLC...38,47

Cascade Engineering Tech...50

Layke Tactical...50

Specialty Steel...48

CLS Fabrication Inc...48

Leadtek...52

Spinetti Machinery...13,41

CMR Manufacturing...51

Lucy Machine Company...45

Spring Works Utah...48

Coast Aluminum...19,41

Mario Pinto...42

StandardAero...29,52

Coastal Metals...6,41

Mazak...21

Star Metal Fluids...41

Coating Technologies...48

MET-TEK Inc...48

Steel Services Grinding...49

Controlled Thermal Tech...51

Methods Machine Tools Inc...41

Strom Manufacturing...47

Creative Aero Engineering...43

Metro Metals Northwest, Inc...50

Sun Grinding...48

Curtis Wright...49

Micropulse West...49

Cycle Time Solutions...42

Midaco Corporation...42

Superior Grinding...48

Design 2 Part...26

Milco...52

Doosan...15,40

Mountain View Machining...49

dtiEXACT...36,47

MP Systems...43

EDM Network...20,40

Newport Tool...52

EDM Performance..40,41

North-South Machinery...31,40

Edge Technologies...10,41,43

Northwestern Machinery...43

Ellison Technologies...15,40

Okeefe Ceramics...34, 47

EPSI...50

Optical Gaging Products Inc...43

Evans Precision...53

OSW Equipment...1, 24,25

Fahey Machinery...1,17,24,25,41,43,44

PAS Technologies...31,52

Faustson...48

Pacific Swiss...47

Flex-Pro...37,48

Performance Machine Tools...8,44

Flow...40,41

Petersen...9,47,51

Wrico Stamping...52

Frontier Group...47

Phoenix Heat Treat...49

Zeiss Metrology...40

A2Z MANUFACTURING WEST COAST •

54 • AUG - SEPT ‘19

Real Axis Machining...50 RENISHAW...23,40 ReSell CNC...44 Revolution Machine Tools...42 Rocky Mountain Saw Blades...45 Ron Grob...35,49 Rosco Precision Machinery...33,40 Rotarex...43 Royal products...28,41 Selway Machine Tool Co...40,42 Sharp Precision Machine Tools...42 SigmaNest...45

Sustaining Edge...43 Swift Tool...3.35,40,44,55 Systems Integtrators...50 Teton...50 ThinBit...2,40 Tool Technology...45 TVT Die Casting...12,47 United Performance Metals...16,44 US Shop Tools...11,44 Von Ruden Manufacturing, Inc...41 Weiser Engineering...49 Western Sintering...30,47

Swift Tool Co. Inc.

KENT 800-562-0900 KENT@SWIFTTOOL.COM SEATTLE 800-700-2801 SEATTLE@SWIFTTOOL.COM

INDUSTRIAL TOOL VENDING & MANAGEMENT

INVENTORY MANAGEMENT solution custom designed for your company!

The REAL Advantages • 24 / 7 access to supplies in your facility, keep 2nd & 3rd shift running • Fastest TOUCH SCREEN interface on easy to use monitors • Control tooling costs with our intelligent management reports • Eliminate stock outages and downtime through our large local inventory • Track usage by employee and job number shown on weekly invoice • Custom packaging dispenses the correct number of tools for the job • Customized vending of products from inserts & end mills to goggles & hard hats

Many options available, let us design one for you!

18 Locker

Slave Unit

32 Locker

A2Z MANUFACTURING WEST COAST •

55 • AUG - SEPT ‘19

Double Down

Manufacturing West Coast A2ZA2Z Manufacturing 1538 E. La Vieve Lane 1538 E La Vieve Lane Tempe, AZ 85284 Tempe, AZ 85284

On Your WORKHOLDING

Built for your 3-Axis

THE

CE U E D

BY

Save Time

+ Make Money

Proudly made in the USA 56 July / Aug 858.505.0432 2019 WEST COAST • 56 • AUG - SEPT ‘19

Manufacturing A2Z Rocky Mountain •

A2Z MANUFACTURING

workholding@5thaxis.com www.5thaxis.com