Vol. 11, No. 3 JUNE-JULY ‘21 Cover Story: Hercules Sealing Products Pages 20-21

West Coast Edition For: WA, OR, and CA

a2zMFG.com

A2Z MANUFACTURING WEST COAST •

1 • JUNE- JULY 21

888 - THINBIT • 888-THINFAX • THINBIT.COM

EXTERNAL FACE GROOVING

EXTERNAL GROOVING

SPECIAL TOOLING

BORING

DOVETAIL FACE GROOVING

FORM TOOLING

INTERNAL GROOVING

INTERNAL THREADING

INTERNAL FACE GROOVING

PROFILING

EXTERNAL GROOVING

ACME THREADING

Introducing THINBIT

FOR MILLLING • FASTER • MORE OPTIONS • LESS EXPENSIVE • LASTS LONGER

Swift Tool Co. Inc.

KENT 800-562-0900 KENT@SWIFTTOOL.COM SEATTLE 800-700-2801 SEATTLE@SWIFTTOOL.COM

Need faster run times? Longer tool life? Get BOTH with

High Performance Solid Carbide End Mills LONGER E! TOOL LIF

FASTER ES! RUN TIM US Patent 9,227,253 10,335,870

Ask about a guaranteed trial order and we’ll prove SwiftCARB is the performance leader!

Editor’s Corner We cannot solve our problems with the same thinking we used when we created them. Albert Einstein

Cover

West Coast Edition Cover : Hercules Sealing Products Hercules is your total source for Albert Einstein was one of the greatest scientific geniuses of all time; metalworking products! some of the facts of his early years are hard to fathom.

He did not learn to speak until 3. He hated school; one of his teachers told him he would never amount to anything, and Announcements/Releases.................... 6-14 at 15 he dropped out.At 16 he took the entrance exam for the Feature Articles............................1,10, 20-21 Buyers Guide Equipment Services......32-38 Polytechnic Institute in Zurich, and failed. Buyers Guide Processes.......................39-45 Card Gallery.........................................32-45 Albert may be saying, to fix a mistake you must fix the process, but the way our brain is processing at Index Of Advertisers................................46 that point in time must change as well to not repeat a negative result. Editorial................................... Throughout Manufacturers can all remember a scrapped job, or a tool breaking at the wrong time, or we may not have seen the job right the first time we reviewed the prints and solid models and we made a mistake drawing out the process. Our head was in a different place at that time. Our perspective and our insight were different then, and we had to change our thinking to evolve. As you think so you are.

Published by: A2Z Manufacturing West Coast PUBLISHERS/EDITORS Kim Carpenter & Linda Daly Kim@A2ZManufacturing.com

For example, when we think we are in a hurry we might act differently than when we have sufficient Mail Address: 1538 E. LaVieve Ln. time on our hands to do the job right or make good decisions. Haste makes waste!We are the sum of our Tempe AZ 85284 decisions at any point in time.We can all look back at when we were young at the job of life.We grew Telephone: (480) 773-3239 up and learned many things and expanded the way we looked at problems and how we solved them Website: www.A2ZManufacturing.com and how the deep impression of a negative memory taught us what not to do in the future.When we E-mail:Kim@A2ZManufacturing.com changed our mind our process changed, then our actions were different and we attacked the situation from a different angle.These new perspectives add up in our personal library.We draw on them when CONTRIBUTORS we remember they are there. Linda Daly, Eugene Wirth, Stephen Hannemann, Hugh Taylor In manufacturing an end result can be achieved many different ways depending on how you think the process should flow based on your experience and the tools you have on hand. In life our thinking is a lot more personal and the tools on hand are with us and sharpened over a lifetime. Our free will allows Published bi-monthly to keep precision manufacturers abreast of news, contracts, trends, and to us to conveniently remember or forget lessons learned. Our mind is vast and our insight can be deep, supply a viable supplier source for the industry. our emotions can get in the way of our standard train of thought so we struggle for the memories that Circulation: A2Z Manufacturing West guide us through the maze of problem solving.

Coast maintains a master list of over 14,000 decision makers consisting of fortune 1000 companies, small One of the great things about our minds is that once we are stretched with new ideas or paradigms we manufacturing companies, engineering firms, DOD & can’t really go back to the way we were, there is no reset button to start over at square one.We are like Scientific Lab facilities, machine shops, fab-shops, and the rubber band in our underwear, once over stretched never to tighten back to the way we once were. secondary source businesses. It has an estimated pass on readership of more than 25,000 people. The majority I encourage you all to try new thinking, or just seeing a new perspective. If you are afraid of 5-axis of our readers are based in CA, OR, WA area!

machining, or 3D manufacturing, robotics, cell manufacturing, or anything new, give it some time and open your mind to the possibilities. Do a seminar or some class studies on the subject matter and see if the fear doesn’t melt away and maybe a new way of thinking comes through.

I hope life is getting back to feeling normal for you all! It was rough not being able to shake hands, see family, go to concerts, comedy shows, ball games, travel, and call on my customers other than by phone and eventually Zoom. I wish you all continued success.We all have 6 more months to make great things happen. Call me and get your story out there to the thousands of like minds that need to hear your story and get motivated by your thinking and what you’ve been through. Thank you for your support and God bless the road we choose.

Kim Carpenter

A2Z MANUFACTURING WEST COAST

• 4 • JUNE- JULY 21

Advertising Rates have remained the same since 1999, deadlines and mechanical requirements furnished on our website at: www.a2zManufacturing.com. All photos and copy become the property ofA2Z Manufacturing. The Publisher assumes no responsibility for the contents of any advertisement, and all representations are those of the advertiser and not that of the publisher. The Publisher is not liable to any advertiser for any misprints or errors not the fault of the publisher, and in such event, the limit of the publisher's liability shall only be the amount of the publishers charge for such advertising.

CUTTING-EDGE PROBLEMS NEED CUTTING-EDGE SOLUTIONS

Join us as we return to live events with the ONLY Machining & Manufacturing Show in the Pacific Northwest! SEPTEMBER 1-2, 2021 |

OREGON CONVENTION CENTER, PORTLAND, OR

The Machine Tool Expo features: • Exhibit Hall of Innovative, New, and Exciting Products • Live Equipment Demos

For Exhibiting Information: Joyce Lortz 410-598-3535 JLortz@FacilitiesExpo.com

• Meet Face-to-Face with Leading Solution Providers • Networking with Your Peers • In-Depth Educational Seminars by Experts • Will Follow State, Local and CDC Guidelines

Announcements & Releases

Ellison Technologies, Inc. Appointed As The Exclusive U.s. Importer For ONA

The European builder, ONA, specializing in EDM technology, has named Ellison Technologies, Inc. as their exclusive U.S. importer responsible for sales, support and distribution. ONA is the pioneer in EDM technology, developing its first die-sinking EDM in 1955. For the past 65 years, ONA has developed their own technology combining the expertise of applications and R&D&i. Today they offer quality EDM solutions, both wire and die-sinking EDM machines, along with customer-specific solutions. “We are confident that our new partnership with Ellison will help U.S. customers to discover our full potential and capacity and will bring a new bright future for us,” said Javier Gonzalez, CEO of ONA. As the U.S. importer, Ellison Technologies will provide existing and new ONA customers with enhanced local support, including sales and project management, engineering solutions, and national technical response centers for service and parts fulfillment. “We are pleased to represent ONA EDM products in the U.S,” said Graham Hooper, CEO of Ellison Technologies. “Much like Ellison, their mission is providing solutions that offer productivity and profitability for A2Z MANUFACTURING WEST COAST •

6 • JUNE- JULY 21

manufacturers through their advances in EDM technology.” About Ellison Technologies

Ellison Technologies ( h t t p : / / w w w. ellisontechnologies. com) is one of the largest machine tool integrators in North Amer ica. With 16 locations to provide local support across the U.S., the company’s mission is to equip manufacturers to compete and win, both locally and globally. In addition to distributing the latest CNC machine t o o l t e c h n o l o g y, Ellison’s team of over 300 industry experts provide its customers with superior engineering solutions, service and parts support, turnkey solutions, robotic automation and machine financing. About ONA

Announcements Continued

LV Swiss is proud to receive their ISO13485 on May 11, 2021 to round out their portfolio of industry certifications. Per Paul Klein, CEO, “Everyone at LV Swiss worked hard to make it possible for us to achieve ISO13485 Certification. Having gone through an extensive Quality processes earlier regarding certifications, we knew it would be a challenge. We were able to leverage the earlier successes and refinements we made to an already robust Quality Management System. Leveraging our many years of experience supporting AS9100 Rev D and ISO 9001:2015 Certifications shorten the overall preparation time. Also, producing prototype parts for numerous medical companies, especially startups, for the last couple of years we knew what was expected. Our engineering staff consults with the customer during the prototype process to identify various means to improve the machineability of the design thus allowing for potential reductions of cost, and lead time, yet keeping the high quality required. “ LV Swiss, located near the entrance of Zion National Park in Southern Utah, is a contract manufacturer that provides high precision CNC Milling and Swiss Screw Machining to Medical,Aerospace & Defense,Automotive, Industrial and Commercial industries since 2009. We are constantly adding new equipment, for example, this year we purchased a Hexagon Coordinate Measuring Machine (CMM) to assist our QA department with automation and inspection of highly intricate CNC milled parts and other small precision Swiss Screw Machine parts. High Quality and On-Time Delivery are the cornerstone of our business. We would appreciate the opportunity to assist with your prototype and production requirements.

To request a quote or learn more about LV Swiss, please call (435) 635-1482, or website www.LVSwiss.com or email at Quoting@LVSwiss.com

YOUR METAL BENDING EXPERTS COILS HEAT EXCHANGERS HIGH PURITY TANKS PLAYGROUND MARINE ALTERNATIVE ENERGY

LV Swiss, a Precision CNC Milling and Swiss Screw Machining Company, Adds ISO13485 Medical Certification to Their Portfolio!

We Bend all Ferrous & Non-Ferrous Metals!

PIPE SPOOLS FOOD & BEVERAGE AUTOMOTIVE AGRICULTURE AQUATIC LOCOMOTIVE AVIATION

ONA is a global pioneer in EDM technology.At its corporate headquarters in Europe it brings together the expertise of a workforce skilled in EDM with a strong emphasis on R&D&i to deliver technical solutions tailored to the needs of each customer. Its high standards and the reliability that comes with over 65 years of experience provide a solid foundation for tackling EDM projects all over the world. Projects that focus entirely on meeting the specific needs and assuring the future profitability of each customer. For more information, visit us at: www.onaedm.com

SCAN HERE FOR COMPANY DIRECTORY! www.albinaco.com/about/contact

(503) 692-6010 www.albinaco.com A2Z MANUFACTURING WEST COAST •

7 • JUNE- JULY 21

BOB KROHA

ROB KROHA

CNC AND MANUAL MACHINERY SINCE 1979 New - Used -Appraisals - Auctions

machine tool spindle technology is of the finest quality in the machine tool industry. Accutek, with its high-quality CNC Toolholder tec hnology and CNC Workholding technology will be expanding is product offering to include the highquality toolholder technology of Diebold as well as its high-quality Shrink Machine Technology to further support their Distribution Partners and Metalworking customers through Mexico, Canada, and the United States. Accutek will not only sell the Diebold products but also service and support all application requirements to maintain a strong quality and service position in the markets it serves.

With the partnership with Diebold,Accutek will be adding the following products to their already strong product offering: • Goldring Toolholders o CentroGrip® Micro-Precision ER Collet system o UltraGrip® Power Milling Chucks o JetSleeve® 2.0 Shrink Fit Coolant Holders o UltraJet® 3.0 Innovative Coolant-thru Power Chucks o Diebold ER Shrink - ER collets with Shrink Fit technology o DMS – Diebold Modular ER Tooling System • ThermoGrip® Shrink Fit Machine Technology Our Showroom At: 3305 Edison Way, Fremont, CA 94538 o MS502-P Mini-Shrink Fit machine o US 1100V – Vertical Shrink Fit Machine Is Open Monday - Friday From 8am To 5pm o US 1100H – Horizontal Shrink Fit Machines o US 1100VT –Vertical Shrink Fit machines Announcements Continued with Integral Solution Cooling o Patented Pyrometer Coil Technology for all US 1100 machines Accutek® Inc. and Helmut Diebold® GmbH • Measuring Technology & Co. Join Forces o Clamping Force Tester o HSK Taper and D-BT Taper Measuring Gauges Two Leaders In Manufacturing Tool Holder Systems Partner to Bring o VEG Presetting and Measuring Systems Latest Technology offerings to the North American Market o 3D Edge Finder Technology Accutek, a high-quality manufacturer of tool holder and work holding Addison, IL: Timothy Fara, Exec. VP of Sales and Marketing at Accutek products, has a strong Industrial Inc., a high-quality manufacturer of tool holding and work holding Distributor Partner support system throughout North America servicing products proudly announces our new partnership with Helmut Diebold all of Mexico, Canada, and United States manufacturing businesses. GmbH & Co. of Jungingen, Germany. Diebold has been a high-quality manufacturer of Tool Holding Technology, Shrink Fit Technology, For more information about Accutek and Diebold, visit Measuring Technology, and Spindle Technology for the global markets www.accutekusa.com , call us at 312-757-6577, since 1952. Their technology advancements in Shrink Fit tooling and or e-mail us at sales@accutekusa.com. Full 360° workpiece machine technology have been at the forefront of the industry. Their

A2Z MANUFACTURING WEST COAST

• 8 • APR-MAY 21

Announcements Continued

The Royal PowerBlock™ Offers Significant Advantages Over Traditional Vises and Fixtures in Five-Axis Applications: Full 360° workpiece contact for both secure gripping and even load distribution – incredible rigidity in all directions without the risk of crushing thin-walled parts. Optimized heights and nose diameters provide superior tool clearance. Parallel-grip collets ensure full-length part contact, while Royal’s industryleading gripping range (0.062”-0.080”) compensates for workpiece variations. A perfect solution for holding asymmetrical parts when paired with a Royal custom-profile Quick-Grip™ collet. Actuated via air or hydraulics – great for automatic load/unload applications. Ten-second collet changes greatly reduce setup times so your valuable machines spend more time making chips. Not just for round parts – let your imagination run wild.

CHALLENGE ACCEPTED

The new SVM 4100 goes toe-to-toe with the best value VMCs. Our customers challenged us to create a lighter, faster, value-based VMC, and it’s here: the SVM 4100 is built and packaged to fit the way you work. Faster feedrates, amped up X/Y/Z accel/decel and boosted spindle accel/decel make this machine special. If performance per dollar is what you’re after, you won’t find much better. The SVM 4100 is an asset for job shops and production houses that churn out aluminum parts every day. To get to work, contact us today.

WASHINGTON/OREGON

NORTHERN CALIFORNIA

SOUTHERN CALIFORNIA

Sales: (253) 872-1661 Service: (800) 994-0146 Parts: (888) 207-2787

Sales: (866) 814-7238 Service: (800) 994-0146 Parts: (888) 207-2787

Sales: (562) 949-8311 Service: (800) 994-0146 Parts: (888) 207-2787

www.ellisontechnologies.com |

Maximize Five-Axis Performance, Productivity, and Profits with the Royal Power-Block™

Contact Royal Products Today!

1-800-645-4174 • info@royalproducts.com • www.royalproducts.com Continued P age 11 A Z MANUFACTURING WEST COAST • 2

9 • JUNE- JULY 21

NORON PRECISION, A WOMAN-OWNED BUSINESS, CERTIFIES TO ISO 9001: 2015 WITH THE HELP OF CONSULTING GROUP BMSC Noron Precision Machining is pleased to announce that they successfully certified to ISO 9001: 2015! The company didn’t certify to this renown ISO standard to improve their quality and on-time delivery. In fact, their quality measures were pristine, so much so that for one of their key customers, they have received two consecutive bi-yearly, ‘Supplier of The Year’ Awards in recognition of exemplary service providing 100 percent on-time delivery and quality. That same customer recently told Debbie that if all his parts were with Noron his life would be so much easier! Established more than 4 decades ago, today Noron Precision Machining, Inc. is a Woman Owned and operated business. Since its inception, the company has supported a diverse array of industries, and today this includes medical, microwave, aircraft, auto, computer peripheral, telecommunications, and biotech. During this past year’s COVID pandemic, Noron Precision was deemed an ‘Essential Business’, and it was tasked with manufacturing components for COVID testing equipment. Owner and CEO Debbie Williams, says, “We have long standing, 30-plus year relationships with several of our customers. We insist on 100 percent ontime delivery, superior quality, and excellent communications. We partner up with our customers and have an obligation to satisfy their demands and grow with them.” Noron Precision is well versed in machining plastics, such as PEEK, ABS, and Delrin, as well as metals including: aluminum, steel, stainless steel, brass, bronze, and copper. Noron offers 5-axis CNC milling and turning, and millturn machines, to make small-to-medium sized components like housings, covers, slides, grippers, levers, mounts, caps, and flow cells. With its machining technology and team expertise, Noron holds very tight tolerances. Debbie and the team recognize the need for continuous improvement, and that has meant upgrading their machine tools over the past several years. Debbie says, “Engineers are leaning toward 5-axis design. Running those parts on a 5-axis is the only way to go because we are able to mill all sides without the need for a second op, thus preventing human error.” she said. “The complexity of parts steered us to buying more 5-axis.” As part of Noron’s pursuit of continuous improvement, Debbie says that the company investigated certifying to ISO 9001 some years ago. “We have been lucky, our current customers, including Tier 1 Aerospace, Medical and Defense customers, have grandfathered us in. Still, we knew it was something that would help our business internally and it would enable us to secure new customers.” Debbie says,“Years ago, we even hired a consultant, and quickly determined the consultant wasn’t a good fit for us.” Around this time, Debbie had seen Bretta Kelly, owner of BMSC and her colleague, Debbie Hart, on the cover of the A2Z Manufacturing magazine. “I was interested in them to help our company back then, but I thought we couldn’t afford them. They had to be Z MANUFACTURING SW • 52COAST • July •/ Aug A ZAMANUFACTURING WEST 10 •2021 JUNE- JULY 21 2

too good (and pricey) – they were on the cover after all.” Debbie saw BMSC on the cover once again last year, and Noron Precision still hadn’t certified. She said, “It was a sign. I had to contact them.” Debbie contacted Bretta this past October.“I immediately hired them, and with Covid, all of our meetings were virtual. Bretta and Debbie are just so good at what they do. It was so rewarding to find that their philosophy meshes with the way Noron conducts its business – we do what we say we will do.” Debbie continues, “Bretta and Debbie were always available, and our meetings were often on weekends and evenings.” Literally in a 6-month period, Noron successfully prepared for and achieved their ISO 9001: 2015 certification. Debbie says, “It will make many of our customers happy, and a somewhat surprising benefit is that it is helping us to streamline operations within our company.” Debbie says, “I just can’t say enough about how great BMSC was for our business —particularly their gift for simplifying the whole process. I recommend them to anyone and everyone I meet in the industry.” Bretta says, “Debbie was a dream client to work with; she wanted to be sure that we were able to understand every part of her business and how important customer satisfaction was to her. Debbie did not want us to just write something that would get her certified!” We decided to write Debbie’s system to be compliant with AS9100D / ISO 9001:2015, because she already met the additional requirements for the aerospace standard including additional traceability and comprehensive inspection processes. The impeccable performance to objectives and metrics made it easy to implement the aerospace standard. Are you ready to implement ISO 9001or AS9100? Call (602) 445-9400 or visit BusinessMSC.com to learn more. To learn more about how Noron Precision Machining, a Woman-Owned, ISO 9001: 2015 Certified company, can help your business, contact them at: (408) 739-6486 or visit NoronPrecision.com

New from Flatline Fabrication Inc.

By Stephen Hannemann

Flatline Fabrication Inc. in Portland, OR is developing the perfect portable fireplace. We have all wished to gather around a cozy fire at an impromptu gathering at one time or another whether on our patios, in our backyard, or while traveling.

FLATLINE FABRICATION WE BRING YOU MAGIC!

Full Fabrication Utilizing ALL Materials! From Design, To Laser Cutting, Forming, Welding, To Finishing And Full Assembly

Unlike many cumbersome stationary offerings on the market, Flatline’s answer is a collapsible, durable all steel creation that disassembles into a 4” high flat pack with its own leather case for easy garage or RV storage. Assembled, this handsome unit is 29.5” long by 13.75 “ wide, by 10” high.The Flatline Fireplace produces a cinder-less fire, and is much safer in wooded areas and a lot less work than constantly scavenging wood

and tending a fire. Prototypes have been completed and Flatline is gearing up for production soon with planned deliveries scheduled for midsummer. The unit can be purchased with or

COVID 19 SNEEZE GUARDS, QUICK, SAFE, HIGH QUALITY CALL TODAY TO PLACE YOUR ORDER: 503-477-7566 without a propane tank. A smaller propane bottle adapter can be used for the hardy back packer. Flatline is accepting pre-production orders. Call Flatline Fabrication Inc. at 503.477.7566 to reserve your fireplace now and be the envy of the neighborhood as the good weather sets in. When in full production the Flatline Fireplace will also be available online through the ThunderStruck Race Co website at thunderstruckraceco.com, but for now call 503.477.7566.

Also check out contact Flatline Fabrication Inc. for all your metal, wood, and plastic fabrication needs: www.flatlinefabrication.com, phone 503.477.7566 4322 NW Yeon Ave., Portland, OR 97210. Continued Next PageGE 10

A2Z MANUFACTURING WEST COAST •

11 • JUNE- JULY 21

Your partner for innovative manufacturing

REVO®—the 5-axis revolution

Infinite positioning and synchronized 5-axis motion provide measurement access at unprecedented speed and accuracy. Our newest solution—the RFP fringe probe—expands our family of multi-

sensors further. It adds non-contact structured light inspection to our revolutionary 5-axis measuring system that already includes tactile scanning, touch-trigger, surface finish and vision probe solutions.

www.renishaw.com/revo Renishaw Inc West Dundee, IL

usa@renishaw.com

The Cost of Poor Manufacturing Quality and 5 Ways You Can Improve It

CMM Revo Half Page Final.indd 1

Ken Feitz

We have all heard the quality team referred to as the “brakes” or “bottleneck” of manufacturing but at the end of the day, what truly sets you apart from your competitors? Is it innovation? Operations? Speed? Hopefully, you have those things, but none of them really matter if your product isn’t perfect. Manufacturing quality is the key to differentiation and a competitive advantage. Manufacturing quality is about conformance to specifications – the design, the manufacturing process and the regulations. It doesn’t matter where the part is manufactured – in-house or with an external supplier. As customer expectations have gone up, manufacturing quality has become a necessary requirement. The bottom line is that manufacturing quality is a critical component of success. And poor manufacturing quality will be a downfall. High QA provides manufacturing quality management software (QMS) solutions that enable companies to efficiently create, manage and monitor all manufacturing quality requirements across produced parts A2Z MANUFACTURING WEST COAST •

12 • JUNE- JULY 21

2:04:17 PM The cost of poor manufacturing quality is high. Product4/6/2020 failures, scrap and recalls will have a lasting negative effect on a manufacturer. Avoiding customer dissatisfaction, damaged reputations and low shareholder confidence from the beginning will aid in success. Products must meet design specifications, comply with industry regulations and meet customer expectations, the first time and every time to be competitive in global markets.

There are several things you can do to improve your manufacturing quality process. Here are 5 basic elements you should implement: 1 - Eliminate Interpretation Errors The quality process is rife with paper drawings and spreadsheets often with handwritten notes, coffee stains and smudges. Creating digital versions stored in a centralized database ensures that everyone is working from the same up-to-date data and all numbers and notes are clearly readable. 2 - Understanding Quality Beyond Pass/Fail Quality is not just at the end of the manufacturing process. By leveraging data throughout the manufacturing and quality process, potential issues can be identified and prevented before the final product is completed. Analyzing the data also provides knowledge of how processes are actually performing allowing for changes and adjustments.

3 - Automate Labor Intensive Processes Often similar templates and forms are needed for the quality process for each individual part. Creating a standard library helps eliminate wasted time re-creating each form or report. Many quality software management systems consolidate operations, templates, reporting and digital data to reduce the labor needed to complete tasks. 4 - Reduce Bottlenecks Monitoring and in-process data is vital to keeping an operation functioning. Is a certain process taking longer than was planned? Is a process identifying more issues than it should? Notification and correction of potential issues help ensure the manufacturing process will run smoothly. 5 - D eve l o p B e t t e r Q u a l i t y Documentation Standard and custom reports, including FAI, PPAP, SPC, NCR, should be easily accessible for all stakeholders who need that information. A company standard and a centralized database will help maintain consistency, accountability, traceability and repeatability. Quality parts are demanded by consumers. But maintaining manufacturing quality is a constant challenge for manufacturers. Investing in sound processes and technology that will put manufacturers

ahead of their competitors in the long run is a must. Don’t get left behind watching your competitors implement better processes and technology High QA™ provides integrated manufacturing quality management software (QMS) solutions for manufacturing companies of every size to streamline and cost-effectively manage quality processes and efficiently work in partnership with their entire supply chain. The innovative software solutions provide all the procedures, workflows, structures and resources needed to monitor, manage, communicate and document your manufacturing and quality processes. With High QA manufacturing quality management software solutions, your products are delivered within tolerance, comply with all applicable standards, and are made in less time with less mistakes. High QA supports the following key industries and compliance standards; Aerospace (AS9100/EN9100, AS9102), Automotive (QS-9000/ISO/ TS16949, APQP, AIAG guidance), Medical (21CFR, ISO 13485), Defense, Heavy Machinery, Oil and Energy and others with multiple best practice standards.

For more information, visit www.HighQA.com A2Z MANUFACTURING WEST COAST •

13 • JUNE- JULY 21

His background as a production press brake operator and programmer coupled with a broad range of mechanical and technical skills have enabled him to quickly diagnose and resolve issues with a wide variety of metal fabrication machinery. His ability to train, share insights and tips with machine operators is a welcomed bonus as well.

Fahey Machinery Company, Inc. Specializing in New and Used Metal Cutting and Fabricating Machinery since 1962. Servicing Oregon,Washington, Idaho and Northern California Did you know? Fahey Machinery Company, Inc. has a Machinery Service Technician based in Boise, Idaho. Getting on site is a vital first step in any service industry and we believe having Jordan in the Boise area will increase our ability to provide efficient timely service for our customer base east of the Cascades. Jordan has been a valued machinery service team member since 2018. After the customary training period with our Service Manager, it was evident he would soon become a valued asset to both company and customer. A2Z MANUFACTURING WEST COAST •

14 • JUNE- JULY 21

Our service team is an integral part of Fahey Machinery Company’s daily operation, and each member is ready to meet your service and maintenance needs.

For all your service requirements, please contact us at Fahey Machinery Company, Inc. 503-620-9031 or office@faheyinc.com Sergio M. - Service Manager Jordan C. - Machinery Service Technician Dylan H. - Machinery Service Technician / Laser Applications Javier M. - Machinery Service Technician Jackie F. - Service Coordinator Continued Next PageGE 10

GE Aviation and Safran Launch Advanced Technology Demonstration Program for Sustainable Engines; Extend CFM Partnership to 2050 GE Aviation and Safran today launched a bold technology development program targeting more than 20 percent lower fuel consumption and CO2 emissions compared to today’s engines. The CFM RISE (Revolutionary Innovation for Sustainable Engines) program will demonstrate and mature a range of new, disruptive technologies for future engines that could enter service by the mid-2030s. “The relationship between GE and Safran today is the strongest it has ever been,” said John Slattery, President and CEO of GE Aviation. “Together, through the RISE technology demonstration program, we are reinventing the future of flight, bringing an advanced suite of revolutionary technologies to market that will take the next generation of single-aisle aircraft to a new level of fuel efficiency and reduced emissions. We fully embrace the sustainability imperative. As we have always done in the past, we will deliver for the future.” “Our industry is in the midst of the most challenging times we have ever faced,” said Olivier Andriès, CEO of Safran. “We have to act now to accelerate our efforts to reduce our impact on the environment. Since the early 1970s, breakthrough engine efficiency and reliability have been the hallmark of our historic partnership and our LEAP engine already

reduces emissions by 15 percent compared to previous generation engines. Through the extension of our CFM partnership to 2050, we are today reaffirming our commitment to work together as technology leaders to help our industry meet the urgent climate challenges.” Technologies matured as part of the RISE Program will serve as the foundation for the next-generation CFM engine that could be available by the mid-2030s.The program goals include reducing fuel consumption and CO2 emissions by more than 20 percent compared to today’s most efficient engines, as well as ensuring 100 percent compatibility with alternative energy sources such as Sustainable Aviation Fuels and hydrogen. Central to the program is state-of-the-art propulsive efficiency for the engine, including developing an open fan architecture.This is a key enabler to achieving significantly improved fuel efficiency while delivering the same speed and cabin experience as current single-aisle aircraft. The program will also use hybrid electric capability to optimize engine efficiency while enabling electrification of many aircraft systems. The program is being led by a joint GE/Safran engineering team that has laid out a comprehensive technology roadmap including composite fan blades, heat resistant metal alloys, ceramic matrix composites (CMCs), hybrid electric capability and additive manufacturing.The RISE program includes more than 300 separate component, module and full engine builds. A demonstrator engine is scheduled to begin testing at GE and Safran facilities around the middle of this decade and flight test soon thereafter. A2Z MANUFACTURING WEST COAST

• 15 • JUNE- JULY 21

TVT DIE CASTING Precision aluminum and zinc die casting, machining and finishing.

ACE (America’s Cutting Edge) Hands-On Bootcamp Goes Beyond Fundamentals Of CNC Machining Say hello to Stian Romberg, a former wide receiver at Brown University, currently a Ph.D. student at the University ofTennessee, Knoxville (UT) and researcher at Oak Ridge National Lab (ORNL). Stian is studying large-scale thermoset additive manufacturing and has had a lot of experience with CNC controls, but has never had the opportunity to run a CNC Machining system.

Quality, Reliability and Service

We are a full service job shop, providing as much or as little project involvement as required – from tool and die design to finishing and assembly.

tvtdiecast.com

▼

800 280 2278

ISO 9001:2008 Certified

“I was very excited to see that Dr. Tony Schmitz would be overseeing the training. I took his advanced manufacturing class last year, so I knew this training program would be great.” After completing the online program, Stian felt he acquired a thorough introduction to the steps required to machine parts, but decided to sign up for the week-long, in-person CNC machining bootcamp to gain hands-on experience. “For many applications, additive manufacturing must be paired with machining to achieve required tolerances, surface finishes, etc.,” he said. “To achieve a well-rounded understanding of what can be achieved with additive manufacturing, I felt like I needed an introduction to machining.” Before even completing the full bootcamp, Stian said he was impressed by the efficiency of the course, adding that he learned an incredible amount even though he invested just one week of his time.

Precision Micro Aluminum Extrusions AS 9100 & ISO 9001 CERTIFIED

Well-designed extrusions can cut machining costs by 60%. We can help! Contact us for a quote today.

Thin, difficult hollow & multi-void hollow shapes Tolerances +/- .001 5" maximum circle size 25 lb minimum order qty Shapes as light as .015 lb/ft CNC machining & fabrication Hard alloys- 2024 & 7075 Soft alloys- 6061 & 6063 Engineering & design assistance

ABOUT ACE

Family-owned and operated since 1983. 4730 Eucalyptus Ave. Chino, CA 91710

909-947-3455 www.superiormetalshapes.net svargas@smshapes.net A2Z MANUFACTURING WEST COAST •

16 • JUNE- JULY 21

“Machining has a language all its own. Although I’m sure there is a lot more for me to learn, I feel much more confident in my machining vocabulary, which will make it easier for me to communicate with machining experts.” As a bonus, Stian added, “Two certified machinists were part of my cohort this week, and they shared some awesome experiences that showed me the importance of understanding the fundamentals of machining.”

The machine tool education and workforce development training for ACE is led by IACMI. The ACE CNC Machining Training program uses virtual training and machining simulation to teach essential manufacturing skills— all designed to help tackle the nation’s skills gap and recover its technical and manufacturing leadership position.Through ACE, IACMI has partnered with the University of Tennessee, Knoxville (UT) and Pellissippi State Community College (PSCC), also in Knoxville, to pilot a new, no-cost CNC machining training opportunity. The training uses a modular, interactive, learn-at-your-own-pace course on modern CNC machining fundamentals. No prior machining experience is required. More than 1,400 people from across the U.S. are engaged in the online training that began in December 2020.The six-hour online curriculum walks

users through the steps necessary to set up for machining a component, up to the point of engaging with the machine. It introduces new technology advancements being developed at ORNL with partners like MSC Industry Supply to reduce expensive trial and error and increase productivity and efficiency of current machine tools.

IACMI ACETraining Teaches Essential Manufacturing Skills To Address U.S. Machining Workforce Gap It is all part of America’s Cutting Edge (ACE), a national initiative for machine tool technology development, advancement, and workforce development. Established by the U.S. Department of Defense Industrial Base Analysis and Sustainment (IBAS) Program from the Office of Industrial Policy, ACE is designed to revitalize U.S. manufacturing and ramp up the machine tool industry in support of national security. “ACE is intended to help the United S t a t e s r e c ov e r the technical and manufacturing leadership position and enable our ability to design and make the machine tools required to produce so many of the products that are used in modern society,” Adele Ratcliff, IBAS program director, said. The ACE bootcamps now underway in eastTennessee are teaching essential manufacturing skills that will address the nation’s growing manufacturing workforce gap through combining the scientific expertise of collaborative public and private enterprises who are working to restore and stabilize U.S. manufacturing.The machine tool research and development for ACE is based at ORNL, whose Manufacturing Demonstration Facility (MDF) is a global leader in developing and validating systems and processes that leverage digital frameworks for manufacturing innovation. “We must close the workforce gap in the U.S. when it comes to machine tool resources, especially as it applies to computer-aided manufacturing (CAM),” said John Hopkins, IACMI chief executive officer. “We’re providing new machine tool instruction and simulation software to enable the creativity, optimization, and efficiency potential of digital manufacturing. To effectively produce tomorrow’s creator-makers, we must increase awareness of manufacturing, and instill a passion for creativity and making.” The ACE CNC machining training program is a two-part, no-cost course. It combines in-person learning with online, virtual training, and machining simulation to teach essential manufacturing skills and introduce the newly developed technology that accelerates competency and optimizes the machine’s performance. In December 2020, IACMI launched the online machining component developed by UT Professor of Mechanical Engineering and ORNL Joint Faculty Member Tony Schmitz.

:2015

Precious Metals Plating Co., Inc + Gold Plating + Silver Plating + Nickel Plating + Electroless Nickel Plating + Tin Plating + Heat Treat With Plate + Nadcap Approved Processes + Boeing Approved Processes + Expedited Turnaround + X-ray Fluorescence Thickness Verification + In-House Laboratory With Atomic Absorption (AA) + Expanded Capacity In Vibratory Plating We Are The Noble Partner With The Personal Touch!

(800) 481-6271 www.pmplating.com A2Z MANUFACTURING WEST COAST •

17 • JUNE- JULY 21

BIGGER. BETTER. BOLDER. Your One-Stop Shop for Metal Finishing Services PAS Technologies, a StandardAero Company, offers a comprehensive

OEM APPROVALS (list non-exhaustive)

portfolio of services for component processing in metal finishing, including: Nondestructive testing, shot / flap peening, grinding, special processing and paint. Chemical Processing

• Anodize Type I, II, III • Black Oxide • Brush Cadmium • Brush Nickel • Cadmium Plating • Chemfilm/Alodine • Chrome Plating • Copper Plating • Dry Film Lube • Electroless Nickel • LHE - Low Hydrogen Embrittlement • Manganese/Zinc Phosphate Plating • Olive Drab • Passivation • Prime/Painting • Silver Plating • Sulfamate Nickel • Thin Dense Chrome Plating • Zinc Nickel

Metal Finishing & Enhancements • Flap Peen • Glass Bead • Shot Peen Grinding • Centerless Grinding • CNC Grinding • Jig Grinding • Surface and Low Stress Grinding Non-Destructive Testing Services • Fluorescent Penetrant Inspection • Magnetic Particle Inspection • Nital Etch

Certifications & Approvals • AS9100D, AS9110C w/ ISO9001:2015 • DDTC Registered • FAA / EASA Certified • NADCAP Accredited - Chemical Processing - Conventional Machining Surface / Low Stress Grinding - Non Destructive Testing - Surface Enhancement Shot Peen / Flap Peen • ROHS Compliant

CONTACT US TODAY TO LEARN MORE pnx_custsvc@standardaero.com pnx_quotes@standardaero.com 1021 N. 22nd Ave, Phoenix, AZ 85009 +1.602.744.2600 www.standardaero.com/phoenix

From there, machine-learning based data analytics continuously Automated Defect Complex “It’s somewhat logical and intuitive.Inspection Where our lives of are disrupted and we need tospeeds. do improves inspection performance using accumulated data. more and more things from our home,Parts we need to ensure we have the technology Metallic at our disposal so things can go on as normal as possible,” Chief Executive Officer Bob said Thursday in an interview Bloomberg Television. “What thatThe has first step to such ground-breaking automation is creating the inspection The Swan ARM-Funded technology Projectwith “Automated Defect Inspection environment to the standards of the most experienced inspectors. The meant is demand for more and more devices,impressive including PCs, for parents to continue for Complex Metallic Parts” has yielded results, including team developed a controlled imaging environment that blocks light to conduct their work and for kids to continue their education.” detection rates above 95%, a speed of approximately one minute per part, contamination to enable accurate and consistent collection of surface

and an expected 345% return on investment if deployed at one site. GKN profiles. Lens filtering then controls reflections and minimizes glares Swan’s company dominates the markets for processors that run PCs and the server from the complex part geometry. By respecting fundamental principles Aerospace is adopting the technology, and has already built the developed machines that act as the backbone of corporate networks and cloud-data centers. of light and reflection, the team then created robotic data collection that inspection cell in a factory. Learn more about the project and approach in Demand for more expensive server chips is also higher as companies and service reveals not only area defects such as corrosion, but also sub-millimeter our write-up below! machining lines and dents. providers improve the systems needed to connect work PCs in people’s homes.

“Beyond the project, the ARM Institute provided us with a platform to Companies aroundand thetoworld -- including Intel -- have sent employees home in identify challenges rethink manufacturing compliance with government orders aimed containing the spread of the Covid-19 beyond aerospace.” – Xu Chen, Project PI at from pandemic. That shift has provoked a rush to invest in the infrastructure that keeps the University of Washington people working remotely. Analysts and investors are now looking for signals on whether that’s a short-term lift thatinspection, will subsidea as lower economic activity takes a Beyond current limits of human toll on corporate and consumer spending, or whether it is a lasting trend. reliable robotic inspector enables inspection of

complex metallic parts at all times of day with Intel is scheduled to report first-quarter no loss in consistency, reduces impacts ofearnings human on April 23 and is expected to give projections for theand current period. In January, before the virus had spread around decision fatigue, will slash manufacturing the world, the company forecast about $19central billion in revenue for the March quarter. costs by reducing part escapes.The team’s innovation is that fusing noncontact imaging data chipmaker was partly for a surge –The robotically collected at theprepared right positions and in demand because it was already expecting a strong quarter and had facilities geared in the right environment – enables high-quality, up to produce more components, Swan said.surface The Santa Clara, California-based consistent profiling at required operationcompany is now working hard to convince governments that its operations are essential and should be exempt from he said.WEST By Ian King A closures, Z MANUFACTURING COAST • 18 • JUNE- JULY 21

Curved geometry disrupts focus and lighting – small defects demand high-resolution macro images. The team’s robotic inspection system automatically partitions and images the part section by section. A bitmasking procedure then extracts only the useful, in-focus areas. To create the key automation feature for the inspection task, the team built a modular and adaptive system architecture integrating imaging and AI inspection with robot motion control. A software platform centered on the Robotic Operation System, or ROS, ensures flexibility for other industries and extensibility for continued research discoveries.

With controlled-environment data collection, subregion bitmasking, and image preprocessing, the team then built deep transfer learning methods to create the machine intelligence required for high-resolution aerospace inspection. Using only very limited aerospace data, the team achieved consistent detection rates above 95% – beyond conventional human limits in precision inspection. The developed inspection robot also works at an impressive speed of approximately one minute per part, amplifying the throughput rate by more than three folds. Collectively, the developed robotic inspector is expected to yield a 345% return of investment if deployed at one site. Furthermore, the number is expected to increase to 1870% if the technology is scaled up to 8 sites, or 3012% at 20 sites.The return of investment could be 17 months, or as small as 2 months if scaled to 20 sites. The team not only engineered automated data collection and the inspection AI to the performance limit, but also made scientific inquiries to create and control the source of illumination, so that even when environmental disturbances occur, lighting remains consistent at the location of the part. These highlights are only elements from a large set of potentially gamechanging impacts. A visual-centric data flow is also immediately interpretable for human-robot collaboration, and traceable to other process steps from machining to polishing, leading to costeffective implementation and quality assurance in the production of entire engines and aircrafts. GKN Aerospace is adopting the technology, and has already built the developed inspection cell in a factory on the east coast. The team is in the process of creating multiple additional extension features for adapting the system to other components involving more defect types to classify, larger footprints, and/or welded components. Interested in supporting projects like this one and creating a future where people and robots work together to respond to our nation’s greatest challenges and to develop and produce the world’s most desired products? Email membership@arminstitute.org to learn more about ARM Institute Membership.

The Advanced Robotics for Manufacturing (ARM) Institute accelerates the development and adoption of robotics technologies that are the foundation of every advanced manufacturing activity today and in the future. The Institute leverages a unique, robust, and diverse ecosystem of partners across industry, academia, and government to make robotics, autonomy, and artificial intelligence more accessible to U.S. manufacturers large and small, train and empower the manufacturing workforce, strengthen the U.S. economy and global competitiveness, and elevate our nation’s security and resilience. Founded in 2017 in Pittsburgh, PA by Carnegie Mellon University and operating as an independent public-private partnership funded by the Department of Defense, ARM is part of the DoD Manufacturing USA® network. Learn more at www.arminstitute.org, follow @ARM_Robotics on Twitter or ARM Institute on LinkedIn. A2Z MANUFACTURING WEST COAST •

19 • JUNE- JULY 21

So, you can have the largest inventory of high quality sealing solutions and tooling solutions but if repair and machine shops have to wait a week, how can they stay competitive? Getting parts the next day is a competitive edge! Kurt Kocik, Director of U.S. Sales & Marketing says, “You’ve got to work harder, stay longer, and do what you say.

Hercules remains the most powerful name in the distribution of aftermarket hydraulic equipment parts. Hercules has mastered distribution for nearly 6 decades, supplying superior quality replacement parts and last year they made another commitment to their customers by adding a large array of metal working products. Hercules now offers a comprehensive line of drills, taps, end mills, countersinks, dies, band saw blades, carbide inserts and holders, honing stones, and rotary thread repair tooling. Hercules is an ISO 9001 registered distributor, dedicated to industry best practices. Quality control begins at the loading dock with strict inspection of incoming products. From there products enter Hercules ‘Total Quality Management and Continuous Improvement Program’ to ensure all processes and procedures are performed accurately. Hercules’ 120,000 square foot facility in Louisville, Kentucky features advanced automation and a robotic picking system with 70 autostore robots and 12 pick ports with 26,205 autostore bins and they work from a large $17 million plus inventory. They process over 1400 orders per day, 95% on the same day to get parts and tools to their customer team next day. Hercules is proud of their associations with top quality tool manufacturers, and they now have their own private label brand of machining products under the name of ‘CLEARCUT’. These tools are made in the USA and Hercules has opted to go with high quality tooling versus throw away tooling. Hercules has also partnered with global powerhouses like Korloy for carbide inserts and Wikus for band saw blades. The combined Hercules inventory from seals to end mills is over 17 million dollars and maintained to support their vast customer base.

A2Z MANUFACTURING WEST COAST •

20 • JUNE- JULY 21

We take orders all the way up until 8:00pm Eastern Standard Time so our customers can receive what they need by 10am the next morning almost anywhere in the US.”

Kurt continued, “It’s pretty simple, Hercules has been the best company for sealing solutions in six decades and we are highly trusted.Why not further help our customers

New State of the Art Facility

Hercules Robots

by selling the tools they need to machine their parts?” Hercules invested over $750,000 in an inventory of high quality metal working tools.Then they priced them very competitively and shipped them next day air so that the customers could get the job done and keep their customers happy. That’s a secret sauce that has been tried and true for over 59 years. They also have 12 Regional Sales Managers and 30 highly trained Inside Sales Agents with over 200 US employees.

Machine it From Scratch What does the next 5 years look like for Hercules? According to Kurt Kocik the future looks very bright, especially for the Western United States, as Kurt has strategically positioned key sales professionals in major cities in the western region to provide the best in customer service for the highest quality machining tools. Kurt says, “Hercules already has the best distribution network, we just need to continue applying this business model to the ‘metalworking tools’ side of the business, make our new customers very happy, and thus complete the loop for greater customer support.”

A Brief History of Hercules Hercules Sealing Products was founded 59 years ago in Clearwater Florida as a byproduct of a seal manufacturer from Buffalo, New York called Hercules Products. At that time, OEM cylinder manufacturers lacked sufficient support for aftermarket repairs. The founder of Hercules realized that there was a niche for aftermarket seal kits and built a company to serve those manufacturing sectors. Today Hercules is one of the leading distributors of aftermarket hydraulic equipment repair parts on the planet. Hercules Sealing Products has been a subsidiary of Diploma PLC since 1995, a major publicly traded company based in London, England specializing in three sectors.These are life sciences, controls, and the sector that Hercules operates in: hydraulic and pneumatic seals. Under the Diploma banner, Hercules belongs to a family of seal companies called the Hercules Fluid Power Group that distributes sealing solutions in two key markets. Half of the members of this group are focused on the distribution of industrial OEM products and the other side, including Hercules, specializes in the distribution of aftermarket parts and machine tools. Customers depend on Hercules to provide seal solutions for equipment in a broad range of industries including construction, mining, agriculture, dump and refuse, logging, and industrial applications. Roughly 400 people are employed across the entire Hercules Fluid Power Group, 200 support Hercules Sealing Products serving thousands of customers throughout the United States, Canada, Central, and South America.

For more information on Hercules and their stellar distribution capability contact them at: 727-796-1300, sales@herculesus.com,

www.herculesus.com “Use Promo code A2Z20 for 20% off your first order with Hercules Sealing Products”. A2Z MANUFACTURING WEST COAST •

21 • JUNE- JULY 21

materials, rising commodities prices and difficulties in transporting Announcements & basic Releases Continued Manufacturing PMI® at 61.2%

products are continuing to affect all segments of the manufacturing from outside North America to North America. Reshoring includes materials and services to the industry. economy. Worker absenteeism, short-term shutdowns due to part “The May Manufacturing PMI® registered 61.2 percent, an increase of work that is produced either in-house or outsourced. A complete shortages, and difficulties in filling open positions continue to be issues 0.5 percentage point from the April reading of 60.7 percent.This figure definition of “reshoring” is available Applications be limit manufacturing-growth The Association For Manufacturing Technology potential. Optimistic panel sentiment indicates expansion in the overall economy forhere. the 12th month in a must that submitted by June 30. To view award details and enter to win, visit (AMT) represents U.S. builders and distributors row after contraction in April 2020.The New Orders Index registered increased, with 36 positive comments for every cautious comment, this webpage. ofanmanufacturing technology – the advanced 67 percent, increasing 2.7 percentage points from the April reading of compared to 11-to-1 ratio in April. Demand expanded, with the (1) machinery, devices and digital equipment that 64.3 percent.The Production Index registered 58.5 percent, a decrease New Orders Index growing at a strong level, supported by the New Export “From 2010 to 2020, more than one million jobs were announced U.S. manufacturing relies on to be productive, of 4 percentage points compared to the April reading of 62.5 percent. Orders Index continuing to expand, (2) Customers’ Inventories Index as coming to the United States from offshore. This is a tremendous innovative, and competitive. The Backlog of Orders Index registered 70.6 percent, 2.4 percentage hitting another all-time low and (3) Backlog of Orders Index continuing achievement, and we seek to motivate and honor the companies points higher compared to the April reading of 68.2 percent. The at a record-high level. Consumption (measured by the Production and that have made reality,” said Moser, founder and NTMA is the voice for the precision manufacturing Employment Indexreshoring registered a50.9 percent; 4.2Harry percentage points Employment indexes) slowing expansion, posting president of April the Reshoring Initiative. and toolindicated and die industries in thea combined United lower than the reading of 55.1 percent. The Supplier Deliveries 8.2-percentage point decrease to the Manufacturing PMI® calculation. States. Backed by nearly 1,300 member Index registered 78.8 percent, up 3.8 percentage points from the April Questions about The theInventories NationalIndex Metalworking Reshoring The Employment Index expanded for themore sixth straight month, but companies, representing than $30 billion figure of 75 percent. registered 50.8 percent, Award can be directed to Harry Moser at 847-867-1144 or harry.moser@ panelists continue to note significant difficulties in attracting and retaining in sales, NTMA provides an array of benefits to 4.3 percentage points higher than the April reading of 46.5 percent. reshorenow.org. For more efforts on reshoring labor at theirmembers companies’ and facilities.including Consumptionadvocacy was clearly andsuppliers’ the industry The Prices Index registered 88 information percent, downon 1.6AMT’s percentage points and supply chain efforts, visit IMTS.com/supplychain. limited due to labor issues and supply constraints as demand remains very compared to the April reading of 89.6 percent. The New Export in Washington, training and education programs high. Inputsand — expressed as supplier deliveries, inventories, and imports Orders Index registered 55.4 percent, an increase of 0.5 percentage networking events nationwide. The Reshoring Initiative, founded in early 2010, helps manufacturers point compared to the April reading of 54.9 percent.The Imports Index — continued to support input-driven constraints to production expansion, realize that local production, in some cases, reduces their total cost registered 54 percent, a 1.8-percentage point increase from the April at higher rates compared to April, due toOf continued trouble in supplier The Benefits Working With of ownership of purchased parts and tooling. The Initiative also trains reading of 52.2 percent.” deliveries. Inputs positively contributed to the PMI® calculation, suppliers how to sell against lower-priced offshore competitors. P4Swiss / Lindel CNC Machiningby a combined 8.1 percentage points. Importation of items slightly improved Fiore continues, “The manufacturing economy continued expansion (The Inventories Supplier Deliveries indexes directly PMA, an inaugural sponsor of the National Reshoring Award,in isthe period. Founded in 1987,and Lindel Precision CNC Machining in May. Business trade Surveyassociation Committee representing panelists reported theirAmerican factor into merged the PMI®;with the Precision Imports Index does not.) The Prices Index the full-service thethat North 4 Swiss in 2019. Together, companies and suppliers continue struggle tothat meetcreates increasing levels metalforming industry — thetoindustry precision metal expanded for the 12th consecutive month, indicating continued supplier P4Swiss / Lindel CNC Machining is dedicated products stamping, fabricating, spinning, forming and of demand.using Record-long lead times, wide-scale shortages slide of critical pricing power scarcity of quality supply chain goods. to and providing CNC machined parts at rollA Zforming technologies, and other processes. Its MANUFACTURING WEST COAST • 22 • JUNEJULY value-added 21 nearly 900 member companies also include suppliers of equipment, Announcements Continued Page 14 2

A2Z MANUFACTURING WEST COAST •

23 • JUNE- JULY 21

Hypersonic Battleship! The U.S. Navy Is Adding Mach-Five Missiles To Three Huge Warships

3,000+ Waterjet Parts Are Just a Click Away

David Axe

We are an authorized distributor of genuine OEM parts from Flow, H2O Jet and KMT. From cutting heads, on/off valves, and orifices to ROCTEC nozzles and more, most parts are in stock, and ordering is fast and easy. Order online at store.barton.com or call (800) 741-7756 to speak with a parts expert. FREE SHIPPING EVERY DAY on orders of $300 or more at store.barton.com Any reference to the original manufacturer is for identification purposes only.

‘Zumwalt’-class guided-missile destroyer USS ‘Michael Monsoor’ participates in U.S. Pacific Fleet’s ... [+] U.S. NAVY PHOTO BY CHIEF MASS COMMUNICATION SPECIALIST SHANNON RENFROE BARTON INTERNATIONAL USA/Canada 800-741-7756 518-798-5462 • info@barton.com • barton.com • store.barton.com BARTON is a trademark of BARTON Mines Corporation.

OIL MIST AND SMOKE IN YOUR SHOP? Low-Cost, Highly Efficient Mist and Smoke Collectors Designed Specifically for the Metalworking Industry www.mistcollectors.com 1-800-645-4174

The U.S. Navy is moving to rip the high-tech—but useless—guns out of its three Zumwalt-class cruisers and, in their place, install launchers for the fleet’s still-in-development hypersonic missile. The Navy’s proposal, buried in the service’s budget proposal for 2022, would install a dozen so-called Conventional Prompt Strike missiles on each of the Zumwalts, giving the massive vessels a significant land-attack capability. The Navy is asking Congress for $1.4 billion in 2022 in order to continue developing the CPS missile and begin adding it to the Zumwalts. The service previously announced it would fit the 35-inch-diameter, two-stage missile in multi-purpose launch tubes that it’s installing on the new “Block V” version of the Virginia-class submarine. The first of the BlockVVirginias should be ready with CPS as early as 2028, according to budget documents. It might take a little longer to modify the Zumwalts to carry the missile. “Efforts in [fiscal year] 2022 include continued development of the weapon system and flight subsystem, platform integration and advanced research and development to support future spiral development capabilities such as enhanced warhead, advanced communication, alternative navigation and terminal sensor technology,” the Navy explained. At nearly 40 feet in length, the Conventional Prompt Strike is a big weapon. It has to be in order to contain both the first-stage booster and the second-stage container for the hypersonic glide vehicle carrying the weapon’s seeker and warhead.The booster propels the glider to hypersonic speed—five times the speed of sound or faster.

A2Z MANUFACTURING WEST COAST •

24 • JUNE- JULY 21

CPS is so big that it doesn’t fit in either the Mark 41 vertical missile launchers that equip the Navy’s Arleigh Burke-class destroyers or the

THE NEW MITSUBISHI EDM...

BURNING CIRCLES AROUND THE COMPETITION.

NEW M800 CONTROL

- CYLINDRICAL DRIVE TECHNOLOGY - 19” TOUCHSCREEN CONTROL - FIBER OPTIC SERVO CONTROL

REMOTE MONITORING

- INDUSTRY LEADING AUTO-THREADING

TRADE-IN PROGRAM

Mark 57 launchers—80 per ship—that line the hull of each Zumwalt.

class from 32 ships to just three. The Navy canceled the Long-Range Land-Attack Projectile in 2016 after calculating that each shell would cost $800,000. That’s nearly as much as a cruise missile with a range of hundreds of miles. The cancellation left the $7 billion-apiece Zumwalts without a large-caliber gun—and without a primary mission. In 2018, the Navy announced the cruisers would assume a new mission. Sailing from San Diego with loads of Tomahawk and SM-6 anti-ship missiles, the Zumwalts would function as long-range ship-killers, capable of sinking enemy vessels from hundreds of miles away.

Six hundred feet long and displacing 16,000 tons of water, the Zumwalts are huge ships. They displace nearly twice as much as the Burkes do. But that doesn’t mean the cruisers with their distinctive, downward-sloping hulls have a lot of empty space. In fact, to fit a dozen CPS tubes, the Navy plans to carve out the two 155-millimeter guns presently sitting in the bow of each Zumwalt. The Advanced Gun System once was the raison d’etre of the Zumwalt program. The unique gun was supposed to fire precision-guided shells out to a distance of more than 80 miles, allowing the cruisers to bombard enemy beaches from beyond range of many land-based defenses. But the Navy developed AGS separately from its ammunition. And the ammunition grew more expensive as the sailing branch cut the Zumwalt

Adding hypersonic missiles bolters the class’s secondary land-attack capability. While the Tomahawk and SM-6 also can strike ground targets, the CPS has much greater range—more than 1,700 miles. In, say, a battle over Taiwan, Zumwalts sailing in the Philippine Sea east of Taiwan could bombard Chinese ports and airfields while also taking shots at the Chinese A2Z MANUFACTURING WEST COAST •

25 • JUNE- JULY 21

Developing Large Floating Offshore Wind To Increase Power Generation

Swift Tool Co. Inc.

PVD COATING CENTER

OUR STATE-OF-THE-ART NANOCOMPOSITE COATING CENTER OFFERS THE HIGHEST QUALITY PVD COATINGS WITH:

• LOW PRICES • FASTEST DELIVERY IN THE INDUSTRY • UNMATCHED CONSISTANCY & PERFORMANCE

Most tools in our industry are coated together with all other types of tools, using the same process and coating formula. We have specific preparation processes, coating processes, and coating formula for each individual tool type and size

• • • •

ENDMILLS TAPS INSERTS DRILLS

• • • •

MEDICAL PARTS PUNCHES DIES GUN COMPONENTS

• • • •

GEARS HOBS VALVES BLADES

Our AlTiN coatings work 20-30% better than other AlTiN’s, and our high performance coatings like MDC, often double tool life or more over industry standard coating like AlTiN.

MDC D C

MDC COATING

30% HIGHER HEAT RESISTANCE THAN ALTIN, WHILE PROVIDING MORE WEAR RESISTANCE AND LUBRICITY. OLECULARLY ENSE OATING ALLOWS FOR 20+ PERCENT FASTER SPEEDS AND FEEDS, RUN 15-30% HIGHER SFPM THAN AlTiN WHILE INCREASING TOOL LIFE 30-200%.

COATING@SWIFTTOOL.COM SWIFT COATING CENTER 800-562-0600

Are you ready to implement or upgrade your Quality Management System to the new ISO 9001:2015 or AS9100D / ISO 9001:2015 Standard, AS9110C or AS9120B? Special Packages available, take advantage of 20 plus years’ experience implementing and auditing quality management systems for commercial and aerospace companies! Bretta Kelly, President and Owner of BMSC, LLC www.businessmsc.com has proven, copy written templates for ISO 9001:2015, AS9100D / ISO 9001:2015, AS9110C / ISO 9001:2015 and AS9120B / ISO 9001:2015 Standards with more than 30 companies upgraded and certified with zero to one finding results to date in their upgrade audits! Packages Available: Complete Electronic QMS System/Templates and 4 hours consulting – Manual, Policy, System Procedures, Work Instruction / Flow charts for some processes, internal audit program, management review program (including forms), competency / training program, objectives training template, risk training and how to document a corrective action training PowerPoint’s - $3,500 Complete Electronic QMS System/Templates and online webinar of how to complete – Manual, Policy, System Procedures, Work Instruction / Flow charts for some processes, internal audit program, management review program (including forms), competency / training program, objectives training template, risk training and how to document a corrective action training PowerPoint’s - $2,500 Do you need Quality Management System Software? Bretta Kelly is also President of CIS WWSG, LLC and is now offering the $3,500 Templates for FREE with purchase of CIS Software! www.cissoftware.com. CIS Software costs $5,000 upfront (one time) and $385/month license and server fees for UNLIMITED users, request a demo today! Testimonial from BMSC Clients featured in the A2Z Manufacturing Magazine who have taken advantage of the BMSC Templates for successful upgrades: Bretta, I wanted to email you and let you know that because of the help of yourself and Debbie we completed our audit to the new revision with no findings! :) We very much appreciate all of the help that you both did for us and will recommend your company to anyone looking to get certified. Your system really makes it easy for companies like ours to stay organized and compliant to the guidelines. Kristie McKee, Gibbs Precision Machine

A2Z MANUFACTURING WEST COAST •

26 • JUNE- JULY 21

Large Floating OffshoreWind Turbineconcept For 12Mw Floating OffshoreWind Turbine To Expand Power Generation

Efforts are underway to develop a new generation of floating wind turbines that would enable larger and more powerful installations that would dramatically expand the range for offshore wind power generation. The goal of the effort is to make it possible to go beyond the current limits of fixed-bottom installations to lower the cost of installing larger, more powerful floating wind turbines beyond the current dept limits. GE researchers provided details of an ongoing two-year, $4 million research project through the ARPA-E’s ATLANTIS (AerodynamicTurbines Lighter and Afloat with Nautical Technologies and Integrated Servocontrol) program to design and develop advanced controls to support a 12 MW floating offshore wind turbine. GE is partnering on the project with Glosten, the developer of the PelaStar tension-leg platform floating wind turbine foundation. “With GE’s Haliade-X, the world’s most powerful offshore wind turbine built to date, we’re just beginning to tap into the future promise of offshore wind power in Europe, the US, and other parts of the globe,” said Rogier Blom, a Senior Principal Engineer in Model-Based Controls and the project’s principal investigator. “Today, these fixed-bottom wind turbines are limited to depths of 60 meters or less.With floating turbines, we would be able to dramatically expand the reaches of offshore wind power to areas with water depths of 60 meters or greater.” Accelerating the development of new technologies to promote the future of floating offshore wind energy is the key objective of ARPA-E’s Atlantis program. By coupling a 12 MW GE turbine with Glosten’s tension leg platform technology, the team is seeking to address the challenge of designing a lightweight floating turbine with up to 35 percent less mass in the tower and the floating platform.This is expected to result in a very significant reduction of the resulting Levelized Cost of Energy – LCOE – of the electricity generated with this turbine. Bloom notes though that the enormity of building a floating platform that can support a structure as massive as an 850-plus foot offshore turbine cannot be understated.

“Designing a floating turbine is like putting a bus on a tall pole, making it float and then stabilizing it while it interacts with wind and waves. Doing this well is both a design and controls challenge,” said Bloom. “Through our ATLANTIS project with ARPA-E, we will be concurrently designing the controls system with the design of the floating structure itself to advance Floating Offshore Wind Energy toward becoming a future commercially viable solution.” Enabling the next generation of floating offshore wind turbines would dramatically expand the power generation potential of offshore wind power. The National Renewable Energy Lab (NREL), estimates that the introduction of floating turbines would expand the potential of U.S. offshore wind resources to more than 7,000 TeraWatt hours (TWhs) per year, nearly double the total annual US energy consumption of 4,000TWh.

Ge Eyes 100% Hydrogen-Fuelled Power Plants By 2030

By Frédéric Simon

“Today, we have a 50% hydrogen capability for combustion in our largest baseload gas turbines” used for power generation, said Martin O’Neill, vice president at GE Gas Power. The company’s objective, he explained, is to continue research and development in order “to advance the percentage of hydrogen combustion capability towards 100% by 2030,” he told a EURACTIV event earlier this month. However, getting there would require a rapid scale up in the production of clean hydrogen, he added. And that will only be possible if multiple sources of low-carbon hydrogen are added to the mix, including socalled “blue hydrogen” where emissions are somehow captured and stored. In July last year, the European Commission unveiled proposals to develop 100% clean hydrogen production from renewable electricity, with plans to install at least 6 gigawatts of electrolysers in the EU by 2025 and at least 40 gigawatts by 2030. More than 95% of hydrogen today is produced from natural gas steam reforming, a carbon-intensive process which adds to global warming emissions. “We think the mix of carbon capture and sequestration now in a decade of action, with layered introduction of blue and green hydrogen is the future,” O’Neill said. In that perspective, “gas turbine power generation technology becomes a destination technology, not just a bridge,” he added. “But we need to act now,” he insisted, calling for “policy incentives and mechanisms” in order to “get emissions reduction immediately instead of waiting for technology to come to scale 10,15, or 20 years from now”. The European Union has agreed tougher climate goals for 2030 and 2050, as part of plans to become climate neutral by mid-century. While this is hastening the demise of coal, attention is now turning to fossil gas, which overtook lignite as the largest source of power sector emissions in 2020, according to recent data. A2Z MANUFACTURING WEST COAST •

27 • JUNE- JULY 21

ISO/AS9100D CERTIFIED

METALS

SHAPES

SERVICES

Aluminum Steel Stainless Brass Copper Ornamental

Sheet/Plate Production Cutting Shim/Bar Tube/Pipe Precision Channel Sawing Angle Shearing Beam Perf./Expand. 818-729-3333, www.IMSmetals.com

We believe that we are stronger and more viable when we manufacture precision components for USA Manufacturing!

Put our Machining Passion to work for you! Call Today: 480-773-3239 www.flexproaz.com

So-Cal’s Source For All Your

Metal Needs Next Day Delivery - No Minimum - Open Saturdays

STOP BY TODAY! Los Angeles | Orange County | San Diego | Inland Empire

Contracts L3 Harris Technologies Inc., San Diego, California, is awarded an $18,075,712 firm-fixed-price, cost-plus-fixed-fee contract.This contract provides for the production and delivery of 285 modernized radios as well as associated engineering support necessary to calibrate and maintain special test equipment while in production.Work will be performed in San Diego, California, and is expected to be completed in April 2023. Fiscal 2021 weapons procurement (Navy) funds in the amount of $17,973,461; and fiscal 2020 weapons procurement (Navy) funds in the amount of $102,251 will be obligated at the time of award, none of which will expire at the end of the current fiscal year. This contract was not competitively procured pursuant to Federal Acquisition Regulation 6.302-1.The Naval Air Systems Command, Patuxent River, Maryland, is the contracting activity (N0001921C0064). Northrop Grumman Systems Corp., San Diego, California, is awarded a $53,773,633 cost-plus-fixed-fee contract to provide continuing operator, maintenance, logistics and sustainment engineering support, to include training, supply chain and spares management for peculiar items, peculiar support equipment, and technical publications in support of the RQ-4A Global Hawk Broad Area Maritime Surveillance - Demonstrator (BAMS-D) aircraft being mission-capable for intelligence, surveillance and reconnaissance missions for the Navy.Work will be performed in Patuxent River, Maryland (45%); undisclosed location outside the continental U.S. (33%); San Diego, California (8%); Indianapolis, Indiana (7%); El Segundo, A2Z MANUFACTURING WEST COAST •

28 • JUNE- JULY 21

California (4%); Sterling, Virginia (2%); and Salt Lake City, Utah (1%), and is expected to be completed in April 2022. Fiscal 2021 operation and maintenance (Navy) funds in the amount of $53,773,633 will be obligated at time of award, none of which will expire at the end of the current fiscal year. This contract was not competitively procured pursuant to 10 U.S. Code 2304(c)(1). The Naval Air Systems Command, Patuxent River, Maryland, is the contracting activity (N0001921C0054). The Raytheon Co., El Segundo, California has been awarded a $3,120,000,000 indefinite-delivery/indefinite-quantity contract for F-15 Radar Eagle Vision. This contract provides for the production, modernization and support of the F-15 APG-82 radar system to rapidly deliver and stay aligned with the F-15 weapon system program.Work will be performed in El Segundo, California, and is expected to be completed June 8, 2036.This contract currently does not have any delivery orders for Foreign Military Sales (FMS) but does allow for future FMS orders and is the result of a sole-source acquisition. Fiscal 2021 aircraft procurement funds in the amount of $471,662 are being obligated at the time of award. The F-15 Division Contracts Branch, Wright-Patterson Air Force Base, Ohio, is the contracting activity (FA8634-21-D-2707). The Boeing Co., Seattle, Washington, was awarded a $12,940,000 costplus-fixed fee, undefinitized contract action for software development services for the maturation, integration, and testing of the accelerated Communications-as-a-Service capability. This contract includes an option which, if exercised, would bring the cumulative value of this contract

to $20,400,000. Work will be performed in Tukwila, Washington (30%); St. Louis, Missouri (26%); Huntington Beach, California (22%); Huntsville, Alabama (13%); San Diego, California (5%); and Palmdale, California (4%), and is expected to be completed by June 2022. If the option is exercised, work will continue through June 2023. Fiscal 2021 research, development, test and evaluation (Navy) funds in the amount of $5,150,000 was obligated at time of award and will not expire at the end of the current fiscal year. This contract was not competitively procured in accordance with 10 U.S. Code 2304(c)(1) — only one responsible source and no other supplies or services will satisfy agency requirements. The Naval Sea Systems Command, Washington, D.C., is the contracting activity (N0002421C5201). (Awarded June 4, 2021) Vigor Marine LLC, Portland, Oregon, is awarded a $9,840,871 firmfixed-price contract for a 65-calendar day shipyard availability. The work to be performed provides for services for the mid-term availability of the fleet oiler USNS Guadalupe (T-AO 200). The contract also contains five unexercised options, which if exercised, would increase cumulative contract value to $11,661,014. Work will be performed in Portland, Oregon, and is expected to be completed by Sept. 12, 2021. Fiscal 2021 working capital contract funds (Navy) in the amount of $9,840,871 are obligated for this award and will not expire at the end of the current fiscal year. This contract was competitively procured via the beta.SAM.gov website, with one proposal received.The Navy’s Military Sealift Command, Norfolk, Virginia, is the contracting activity (N3220521C4126).

The Boeing Co., Seattle, Washington, has been awarded a $101,730,845 modification (P00247) to contract FA8625-11-C-6600 for KC-46 engineering, manufacturing, and development contract.This modification provides for the exercise of Option Five for interim contractor support and the exercise of the options for logistics service representatives/field service representatives support for Seymour Johnson Air Force Base, North Carolina. Work will be performed in Seattle, Washington; and Seymour Johnson AFB, and is expected to be completed June 27, 2022. Fiscal 2021 aircraft procurement funds in the full amount are being obligated at the time of award. Air Force Life Cycle Management Center, Wright-Patterson AFB, Ohio, is the contracting activity. General Dynamics NASSCO – San Diego, San Diego, California, is awarded a $98,749,123, firm-fixed-price contract for the execution of the USS Pinckney (DDG 91) FY22 depot modernization period. This availability will include a combination of maintenance, modernization and repair of the USS Pinckney.This contract includes options which, if exercised, would bring the cumulative value of this contract to $121,109,530.Work will be performed in San Diego, California, and is expected to be completed by July 2023. Fiscal 2021 other procurement (Navy) funds in the amount of $93,500,245 (94.7%); and fiscal 2021 operation and maintenance (Navy) funds in the amount of $5,248,878 (5.3%) will be obligated at time of award, of which, funding in the amount of $5,248,878 will expire at the end of the current fiscal year. This contract was competitively procured using full and open competition via the beta.sam.gov website with three offers were received in response to Solicitation No. N00024-21-R-4478. A2Z MANUFACTURING WEST COAST •

29 • JUNE- JULY 21

The Manufacturer’s Secret Weapon Indomitable Spirits

By Stephen Hannemann

Photo courtesy of 3D Plastics – As a manufacturer’s rep, Newberg, OR I am associated with ten companies that I represent and interact within the marinade of companies they support. We are collectively grateful, not for the pain, uncertainty, and in some cases pure lunacy of the previous 18 months, but for the fact we are still viable businesses, and in some cases, thriving again. How is this possible? One word, Attitude! An indomitable human spirit is one of the most incredible of God’s gifts to humanity. Collectively these spirits can and will propel an organization into an unstoppable juggernaut. These “I-Spirits,” as I call them, view unforeseen challenges as opportunities to problem solve, to learn something new, to personally grow, to expect and witness the positive outcomes. They are visionaries but most of all, when all is said and done, Photo courtesy of Pacific Swiss – and the dust has settled, they Clackamas, OR are gratified by the experience. I love watching and listening to Simon Sinek. Simon is on Linked-In daily. A month ago, during one of his interviews he made a statement regarding motivate vs. inspire. He said something along the lines of, “I would much rather inspire, than try to motivate.” The inference was if you need to motivate your personnel, you should probably have a talk with your human resource manager. It is the inspired men and women in businesses and their determined and committed work forces I am describing that have survived the past 18 months. They are the ones who went farther above and beyond for their customers than ever before. Collectively they would not allow themselves or their businesses to be victimized by circumstances. Now A2Z MANUFACTURING WEST COAST •

30 • JUNE- JULY 21

they’re grateful, not for the hardship, but grateful for being part of an organization filled with I-Spirits having been able to respond to a mercurial business environment, to be creative and maneuver weekly changing regulations, to successfully deal with supply chains as they tightened or even evaporated, while still meeting their customers’ needs.

Photo Courtesy of Calcagno Foundry – Boring, OR

Just this week I read an article touting the fact that some sectors of manufacturing are nearly only 10 percent away from pre-pandemic production rates. These milestones are being bravely accomplished in the face of seriously industry-wide workforce shortages. How is this conundrum taking place? A committed and dedicated army of indomitable spirits have caried the day. A group of men and women whose spirits are fulfilled and richly rewarded by hard work and who relish the sense of pride at accomplishing great things in spite of overwhelming odds.

There is not enough room to shout out all our principals on this page, however, I wish to thank all industries represented by SMH for their enduring indomitable spirits and their tremendous contributions to our ongoing manufacturing recovery. For more information regarding any of the well vetted companies represented by SMH Inc., visit www.smhincllc. com, email stephen@smhincllc.com or phone 425.501.7342.

Photo courtesy of North West Metalcraft – Marysville,WA

SMH Inc. – “The Manufacturer’s Secret Weapon”

Swift Tool Co. Inc.

KENT 800-562-0900 KENT@SWIFTTOOL.COM SEATTLE 800-700-2801 SEATTLE@SWIFTTOOL.COM

Swift Tool has the largest selection of cutting tools & abrasives in the Northwest

IN IT’S K! C STO

High Performance Solid Carbide End Mills

Indexable Cutting Tools

Craig Tool Countersinks and Counter Bores

Ceratizit Milling Cutters

Slugger Annular Cutters

Nachi Drills

Carmex Threadmills

Arc, Merit, Jisco, Capco, Norton, Camel Grinding Wheel Discs, Pads, Belts, Flap & Cut-off Wheels, Burrs, Brushes and Files

• Custom Tooling Packages • Tool Remanufacturing • PVD Coating Service • Technical Support & MUCH MORE! • 31 • A2Z MANUFACTURING WEST COAST

JUNE- JULY 21

Buyer’s Guide & Card Gallery Equipment and Services

Cutting Tools made in the U.S.A. since 1964

w w w. t h i n b i t . c o m

A2ZWCBG2019.indd 1

12/6/2018 10:33:33 AM

Cutting Tool Mfg PVD Coating Sharpening Industrial Supplies Laser Marking Technical Support Tarik Swift tarik@swifttool.com Kent

Ofc (253) 854-7777 Fax (253) 854-7779 Seattle Sales

ACCESSORIES Abrasive Systems Applications Specialities____ 253-872-0305 MESCO______________ 626-303-5680 Swift Tool Co, Inc._______ 800-562-0900 Air Cleaning Guns Royal Products_________631-273-1010 Air Coupliings Bilz USA____________ 224-563-7233 Auto-Bar Feed Systems Western Machine Center____408-955-1000 Ballscrews C & M Precision Spindle, Inc.__503-691-0955 Band Saws/Saw Blades Bandsaw Tech__________562--419-7675 Cycle Time Solutions_____510-708-8665 Saw Service___________877-738-6437 Sterling Saw Blades_______800-828-1180 Swift Tool Co, Inc._______ 800-562-0900 Band Saw Replacement Parts Saw Service___________877-738-6437 Sterling Saw Blades_______800-828-1180 Band Saw Repair Saw Service___________877-738-6437 Sterling Saw Blades_______800-828-1180

A2Z MANUFACTURING WEST COAST •

Bar Feeders Automatics & Machinery Co., Inc_303-990-6190 Edge Technologies_______ 951-440-1574 Spinetti Machinery_______ 775-996-3770 Bar Feeder Repair Edge Technologies_______ 951-440-1574 Boring THINBIT_____________ 888-844-6248 Cams Dayton Lamina._________ 708-203-6684 Carbide Tools, Indexable Cycle Time Solutions______ 510-708-8665 Horizon Carbide_________ 602-524-3802 MESCO______________ 626-303-5680 Swift Tool Co, Inc.________ 800-562-0900 Chemicals: Ultrasonic Star Metal Fluids________ 800-367-9966 Chip Removal DATRON_____________ 480-826-3689 ChuckJaws & Adapters Lucy’s Machine Company____ 323-587-6162 Collets & Chucks Cycle Time Solutions______ 510-708-8665 Edge Technologies_______ 951-440-1574 Royal Products_________ 631-273-1010

32 • JUNE- JULY 21

Swift Tool Co, Inc.________ 800-562-0900 US Shop Tools__________ 800-243-7701 CNC Lathe Accessories Trusty-Cook___________ 877-240-2462 Von Ruden Manufacturing, Inc._763-682--3122 CNC Spindle Liners Trusty-Cook___________ 877-240-2462 Compressor Systems Ingersoll Rand__________ 206-472-0826 Cooling Systems Buds Equipment Sales_____ 435-659-9455 Coolant Applications Specialities_____ 253-872-0305 Star Metal Fluids________ 800-367-9966 US Shop Tools__________ 800-243-7701 Coolant Systems & Chillers MP Systems___________ 909-282-7463 Star Metal Fluids________ 800-367-9966 Swift Tool Co, Inc.________ 800-562-0900 Cutting Fluids & Oils Saw Service___________ 877-738-6437 Sterling Saw Blades_______ 800-828-1180 Star Metal Fluids________800-367-9966 Swift Tool Co, Inc.________800-562-0900 Cutting Tools

Applications Specialities_____ 253-872-0305 Bilz USA_____________ 224-563-7233 DATRON______________480-826-3689 Horizon Carbide_________ 602-524-3802 Innovative Tool Sales______ 714-780-0730 MESCO_______________ 626-303-5680 Rosco Precision Machinery____206-818-6813 Saw Service____________877-738-6437 Sterling Saw Blades________ 800-828-1180 Spinetti Machinery________775-996-3770 Swift Tool Co, Inc.________ 800-562-0900 THINBIT______________888-844-6248 US Shop Tools___________800-243-7701 Von Ruden Manufacturing, Inc._ 763-682--3122 Cutting Tool Holders Bilz USA_____________ 224-563-7233 Innovative Tool Sales______ 714-780-0730 Cutting Tool Systems Bilz USA_____________ 224-563-7233 Cycle Time Solutions______ 510-708-8665 Innovative Tool Sales______ 714-780-0730 S.L. Fusco San Leandro_____ 510-895-9000 S.L. Fusco R. Dominguez_____310-868-1010 S.L. Fusco National City______619-477-7733 Spinetti Machinery________775-996-3770

Division of Curran Manufacturing Corporation

200 Oser Avenue Hauppauge, NY 11788 U.S.A.

Tel:

1-631-273-1010 1-800-645-4174 Fax: 1-631-273-1066 1-800-424-2082

www.royalprod.com

orders@royalprod.com

4740 NE 166th Avenue Portland, OR 97230 (503) 224-6061 (877) 398-6061 Fax (503) 253-1790 Cell (503) 572-9331

Tyler Acheson

Territory Sales Manager

FANUC Master Certiﬁed Service Engineer Council Bluﬀs, IA | Waukesha, WI | Huntington Beach, CA

402.650.8132 844-4-ACIETA

www.coastaluminum.com jpalmer@coastaluminum.com

John Palmer Jr. Vice President: Northwest Region

THINBIT_____________888-844-6248 S.L. Fusco R. Dominguez____ 310-868-1010 S.L. Fusco National City_____619-477-7733 Deburring Tools Swift Tool Co, Inc.______800-562-0900 Royal Products_________ 631-273-1010 Fabrication Tooling Die Tooling Springs Dayton Lamina._______708-203-6684 Dayton Lamina._________708-203-6684 Filiter Mist Collectors Dot Peen Markers Royal Products_______631-273-1010 MarkinBox_____________ 310-214-3367 Fixturing Draw Tubes DATRON_____________ 480-826-3689 Lucy’s Machine Co._______323-587-6162 Form Tooling Drills/Cutters-Magnetic THINBIT_____________ 888-844-6248 Bilz USA____________ 224-563-7233 Grooving Head, Grooving Tools Innovative Tool Sales______714-780-0730 S.L. Fusco San Leandro_____510-895-9000 Cycle Time Solutions______510-708-8665 S.L. Fusco R. Dominguez___310-868-1010 THINBIT_____________ 888-844-6248 Guide Bushings, Swiss S.L. Fusco National City____619-477-7733 Edge Technologies_______ 951-440-1574 Drills/Reamers/Taps Hydraulic Fluids Bilz USA____________ 224-563-7233 S.L. Fusco San Leandro_____510-895-9000 S.L. Fusco San Leandro_____510-895-9000 S.L. Fusco R. Dominguez____ 310-868-1010 S.L. Fusco R. Dominguez___310-868-1010 S.L. Fusco National City_____ 619-477-773 S.L. Fusco National City____619-477-7733 Indestructable Keyboards Swift Tool Co, Inc.________800-562-0900 Byte Box_____________ 888-bytebox EDM Materials & Supplies Inserts Desert EDM___________ 480-816-6300 EDM Network_________480-836-1782 Horizon Carbide_________602-524-3802 EDM Performance_______ 800-336-2946 Swift Tool Co, Inc._______ 800-562-0900 Jaws End Mills EDM Network__________480-836-1782 Applications Specialities____ 253-872-0305 Horizon Carbide_______602-524-3802 US Shop Tools__________800-243-7701

S.L. Fusco San Leandro___510-895-9000

Keyseat Cutters

MOBILE PARTS & 24/7 SERVICE

tacheson@acieta.com www.acieta.com Delivering Tomorrow’s Automation Today

Fullerton Tool Company____________ 303-478-3497 Lifting & Material Handling Ingersoll Rand__________ 206-472-0826 Live Centers Royal Products_________ 631-273-1010 Load Unload Systems Edge Technologies_______ 951-440-1574 Lubricants / Systems Hangsterfer’s__________ 316-640-2462 Hangsterfer’s__________ 760-580-1357 S.L. Fusco San Leandro_____ 510-895-9000 S.L. Fusco R. Dominguez____ 310-868-1010 S.L. Fusco National City_____ 619-477-7733 Star Metal Fluids________ 800-367-9966 Swift Tool Co, Inc.________ 800-562-0900 Machine Tool Acccessories Swift Tool Co, Inc.________ 800-562-0900 US Shop Tools__________ 800-243-7701 Von Ruden Manufacturing, Inc._763-682--3122 Machine Tool Cool Filtration S.L. Fusco San Leandro_____ 510-895-9000 S.L. Fusco R. Dominguez____ 310-868-1010 S.L. Fusco National City_____ 619-477-7733 Star Metal Fluids________ 800-367-9966 Milling & Turning Products Von Ruden Manufacturing, Inc._763-682--3122 Modular Spray Systems Swift Tool Co, Inc.________ 800-562-0900 Mounting Brackets

Lucy’s Machine Company____ 323-587-6162 Packaging/Shipping Supplies Alliance Packaging______ 206-445-5898Parts Washing Equipment Ebbco Inc____________800-809-3901

Polycrystalline Diamond (PCD) Fullerton Tool Company_____303-478-3497 Power Tools Ingersoll Rand_________ 206-472-0826 Precision Bearings C & M Precision Spindle, Inc.__503-691-0955 Probing Systems Sherpa Design_________ 503-771-3570 Profiling THINBIT_____________888-844-6248 Punch Die Tooling Dayton Lamina._________708-203-6684 Safety Products US Shop Tools__________800-243-7701 Saw Blades & Replacement Parts Rocky Mountain Saw Blades_ 303--761-3000 SawBlade.com_________ 800--240-2932 Solvents: Vapor degreasing Star Metal Fluids_______ 800-367-9966 Solvents:Hand Wipe Star Metal Fluids_______ 800-367-9966 Solvents: Mil PRF 680 Star Metal Fluids_______ 800-367-9966 Special Tooling

Von Ruden Manufacturing, Inc. Since 1946

Fluid Power / Mechanical / Tool Products ISO 9001:2008 Certified

Brandon Anderson President

MOBILE: 612.251.0868 E-MAIL: brandon@vonruden.com

DIRECT: 763.682.0322 PHONE: 763.682.3122 FAX: 763.682.3954

1008 First Street NE - PO Box 699 - Buffalo, MN 55313 USA Made in USA

www.vonruden.com

Driven Tooling for the Machine Tool Industry

Made in USA

A2Z MANUFACTURING WEST COAST •

33 • JUNE- JULY 21

Exclusive provider of OKUMA

Marc Goerlich Business Manager

GOSIGER NORTHWEST 21911 68TH Ave South Kent, WA 98032

www.SwiftTool.com 1538 E La Vieve Lane, Tempe, AZ 85284

C 253.278.1110

E marc.goerlich@gosiger.com www.gosiger.com

Since 1922

ISO 9001:2008 Certified

GROUP

Brandon Anderson

Von Ruden Manufacturing, Inc. MOBILE: 612.251.0868 E-MAIL: brandon@vonruden.com

DIRECT: 763.682.0322 PHONE: 763.682.3122 FAX: 763.682.3954

1008 First Street NE - PO Box 699 - Buffalo, MN 55313 USA Made in Italy

www.live-tooling.com

Driven Tooling for the Machine Tool Industry

Made in Italy

THINBIT_____________ 888-844-6248 Spindle Liners Lucy’s Machine Company____ 323-587-6162 Stamping Tooling Dayton Lamina._________708-203-6684 Support Stands Lucy’s Machine Company____ 323-587-6162 Threading THINBIT_____________ 888-844-6248 Tooling Pins & Bushings Dayton Lamina._________708-203-6684 Tool Sharpening (Grinding) Applications Specialities_____253-872-0305 Swift Tool Co, Inc.________800-562-0900 Tooling Systems Applications Specialities_____253-872-0305 Bilz USA____________ 224-563-7233 Cycle Time Solutions______510-708-8665 Horizon Carbide_________602-524-3802 Rosco Precision Machinery___253-333-2439 RyansDovetails.com_______ 253-876-9981 S.L. Fusco San Leandro_____510-895-9000 S.L. Fusco R. Dominguez____ 310-868-1010 S.L. Fusco National City_____619-477-7733 Spinetti Machinery_______775-996-3770 THINBIT_____________ 888-844-6248 Von Ruden Manufacturing, Inc._763-682--3122 Western Sintering_______ 509-375-3096 Vises & Vise Jaws RyansDovetails.com_______ 253-876-9981 Workholding Applications Specialities_____253-872-0305 Cycle Time Solutions______510-708-8665 Innovative Tool Sales______714-780-0730 MESCO______________ 626-303-5680 APPRENTICESHIPS & TRAINING

A2Z MANUFACTURING WEST COAST •

Aerospace & Advanced Manufacturing Apprenticeships AJAC_______________ 206-737-8342 Machining Apprenticeships AJAC_______________ 206-737-8342 Precision Metal Fabrication Apprenticeships AJAC_______________ 206-737-8342 Training & Education AJAC_______________ 206-737-8342 APPRAISALS Machinery Resources_______480-694-9919 AUCTIONS/LIQUIDATIONS Machinery Resources_______480-694-9919 BANKING

Mechanical Design Creative Aero Engineering_____562-443-7566 ERP SOFTWARE VIision 33____________ 206-456-5185 Business Management Software Solutions VIision 33____________ 206-456-5185 FINANCING EQUIPMENT Pacific Continental Bank____ 503-310-3604 U.S. Bank Equipment______ 800-810-0038

Valley Financial Services____818-968-4861 GARNET GMA Garnet Group _______832-243-9300 GRINDING Quick Turn Financial______ 415-608-5692 Flywheel & Rotor Grinders, Pacific Continental Bank____ 503-310-3604 DCM Tech ____________ 800-533-5339 U.S. Bank Equipment_____ 800-810-0038 Grinding Filtration Valley Financial Services____818-968-4861 S.L. Fusco San Leandro_____ 510-895-9000 BUSINESS ADVISORS S.L. Fusco R. Dominguez____ 310-868-1010 Muerller Prost___________314-862-2070 S.L. Fusco National City_____ 619-477-7733 CARRIERS & RIGGING Grinding Machines IRH Carriers & Rigging______ 435-230-1779 DCM Tech ____________ 800-533-5339 CNC PROGRAMING TRAINING Ellison Technologies_______ 206-669-3578 Streamingteacher.com Gosiger In WA___________937-586-5067 CONSTRUCTION MANAGEMENT Gosiger In CA__________ 714-446-7770 Capacity Commercial Group__ 503-326-9000 HS&S Machine Tool________ 408-472-2436 CPA/ ACCOUNTING North-South Machinery______562-690-7616 Muerller Prost___________314-862-2070 North Western Machinery____ 206-583-2333 DISIGN FOR MANUFACTURABILITY Performance Machine Tools____510-249-1000 3-D Plastics, Inc._________ 503-720-0572 Sharp Machine Tool_______ 310-944-8016 DOOR SYSTEMS Guard & Vacuum Pedestals For Automatic Door opening Systems Grinders Midaco Corporation_______ 847-593-8420 Midaco Corporation_______ 847-593-8420 ENGINEERING/DESIGN Sharp Machine Tool_______ 310-944-8016

34 • JUNE- JULY 21

Grinders, Rotary DCM Tech -----------------------------------800-533-5339 Industrial Surface Grinders DCM Tech -----------------------------------800-533-5339 Silicon & Quartz DCM Tech __________800-533-5339 Punch & Die Grinders DCM Tech___________800-533-5339 INSPECTION EQUIP HS&S Machine Tool________408-472-2436 Hexagon_____________ 206-304-3847 King Machine Inc.________ 509-435-6741 Rosco Precision Machinery___ 206-818-6813 S.L. Fusco San Leandro_____ 510-895-9000 S.L. Fusco R. Dominguez____ 310-868-1010 S.L. Fusco National City_____ 619-477-7733 Swift Tool Co, Inc._______ 800-562-0900 Zeiss Industrial Metrology___800-327-9735 3D CAD for CMM Hexagon_____________ 206-304-3847 CMM Probes Hexagon_____________ 206-304-3847 OGP ______________ 480-889-9056 Zeiss Industrial Metrology___800-327-9735 Coordinate Measuring Mach. HS&S Machine Tool________408-472-2436 Hexagon_____________ 206-304-3847 OGP ______________ 480-889-9056 Zeiss Industrial Metrology___800-327-9735 Laser Trackers Metrology Instruments HS&S Machine Tool________408-472-2436 Hexagon_____________ 206-304-3847 OGP ______________ 480-889-9056 Zeiss Industrial Metrology___800-327-9735

Carlos R. Lugo Sales Manager

NORTH WESTERN - MAC H I ~_ E R Y ,

1222 S. Weller St. Seattle, WA 98144 www.nwmachinery.org

(206) 583-2333 Fax (206) 583-0698 Cell (206) 898-6900 clugo@nwmachinery.org

Mike Mills , Manager Arizona Oﬃce Cell: 480.694.9919 Email: Mike@Machineryresources.com

Equipment Financing

WWW.GANESHMACHINERY.COM

Optical Comparators Hexagon_____________ 206-304-3847 Zeiss Industrial Metrology_800-327-9735 Particle Inspection Mach DCM Tech ____________ 800-533-5339 INSURANCE Business Insurance Solutions Sentry Insurance________ 877-373-6879 LASER & FIBER LASER MACHINES MarkinBox_____________ 310-214-3367 MACHINERY/MACHINE TOOLS Additive Manufacturing 3D Machines Gosiger In WA__________ 937-586-5067 Gosiger In CA__________ 714-446-7770 Production Machine Tools, Inc._ 425-881-1200 Boring Mills Rosco Precision Machine ry___ 253-333-2439

Bridgeport Parts Desert EDM____________480-816-6300 CNC Controls & Retro Fits Rosco Precision Machinery___ 253-333-2439 CNC Lathes

Desert EDM____________480-816-6300 Ellison Technologies_______ 206-669-3578 Expand Machinery_______ 818-349-9166 Gosiger In WA__________ 937-586-5067 Gosiger In CA__________ 714-446-7770 HS&S Machine Tool________408-472-2436 King Machine Inc.________ 509-435-6741 KNUTH Machine Tools______ 847-415-3333 Machinery Resources______ 480-694-9919 Methods Machine Tools Inc.___ 714-292-9384 North-South Machinery______562-690-7616 North Western Machinery____ 206-583-2333 Romi Machine Tools, Ltd_____ 480-510-4146 Rosco Precision Machinery___ 253-333-2439 Santa Cruz Electronics______ 831-479-5444 Selway Machine Tool_______503-314-3165 Selway Machine Tool______ 425-931-1680 Selway Machine Tool______ 925-699-2522 Sharp Machine Tool_______ 310-944-8016 Spinetti Machinery_______775-996-3770 Summit Machine Tool______ 800-654-3262 CNC Lathes-Big Bore Ganesh Machinery_______ 818-349-9166 3 , 4, & 5 Axis CNC Mills

DATRON___________ 480-826-3689 Desert EDM___________480-816-6300 Ellison Technologies_____ 206-669-3578 Expand Machinery______ 818-349-9166 Gosiger In WA________ 937-586-5067 HS&S Machine Tool______408-472-2436 Machinery Resources______ 480-694-9919 Methods Machine Tools Inc.___ 714-292-9384 North-South Machinery_____ 562-690-7616 North Western Machinery____ 206-583-2333 Production Machine Tools, Inc._ 425-881-1200 Rosco Precision Machinery___ 253-333-2439 Selway Machine Tool______ 503-314-3165 Selway Machine Tool______ 425-931-1680 Selway Machine Tool______ 925-699-2522 CNC 3 & 5 Axis Routing Machines Ellison Technologies_______ 206-669-3578 CNC Slant Bed Turning Centers Expand Machinery_______ 818-349-9166 CNC Swiss Turn Machines Ellison Technologies_______ 206-669-3578 Gosiger In WA__________ 937-586-5067 Gosiger In CA__________ 714-446-7770 Machinery Resources______ 480-694-9919 LMI Machinery Inc.________ 866-437-7315 Machinery Resources______ 480-694-9919 Methods Machine Tools Inc.___ 714-292-9384 North-South Machinery______ 562-690-7616 North Western Machinery____ 206-583-2333 Custom Design/Build Machines Lambie Engineering________509-868-3100 Dot Peen Markers Kwik Mark Inc__________ 815-363-8268 EDM Automation Methods Machine Tools Inc.___ 714-292-9384 Sharp Machine Tool_______ 310-944-8016 EDM Die Sinking Machines Desert EDM____________480-816-6300 Methods Machine Tools Inc.___ 714-292-9384 EDM Filtration

EDM Network__________ 480-836-1782 Methods Machine Tools Inc.___ 714-292-9384 EDM Machines CNC Machine Services______ 206-999-3232 Current EDM, Inc. _________612-840-0037 EDM Network__________ 480-836-1782 HS&S Machine Tool________408-472-2436 KNUTH Machine Tools______ 847-415-3333 Methods Machine Tools Inc.___ 714-292-9384 North-South Machinery_____ 562-690-7616 EDM Drilling & Micro Hole Machines Current EDM, Inc. _________612-840-0037 HS&S Machine Tool________408-472-2436 Methods Machine Tools Inc.___ 714-292-9384 EDM Service EDM Network__________ 480-836-1782 EDM Tooling Systems Desert EDM____________480-816-6300 EDM Network__________ 480-836-1782 Equipment Financing

Pacific Continental Bank____ 503-310-3604 Scottrade Bank Equip. Finance__206-948-0022 U.S. Bank Equipment______ 800-810-0038 Gantry & Bridge Systems Ellison Technologies________206-669-3578 HS&S Machine Tool________408-472-2436 Horizontal Boring & Milling Machines (CNC ) HS&S Machine Tool________408-472-2436 Rosco Precision Machinery___ 253-333-2439 Jig Boring Methods Machine Tools Inc.___ 714-292-9384 Lathes CNC Machine Services______ 206-999-3232 HS&S Machine Tool________ 408-472-2436 King Machine Inc._________ 509-435-6741 Rosco Precision Machinery___ 253-333-2439 Spinetti Machinery_______775-996-3770 Exclusive provider of OKUMA

Michael Garver Sales Manager

GOSIGER NORTHWEST 21911 68TH Ave South Kent, WA 98032 T 253.826.3921 C 253.508.4771 E michael.garver@gosiger.com www.gosiger.com

A2Z MANUFACTURING WEST COAST •

35 • JUNE- JULY 21

The Industry’s Most Trusted Source to Buy, Sell, and Trade-In Used CNC, Plastics, and Sheet Metal Fabrication Machinery.

800.922.1674 • Purchase/Resale-Individual Machines/Entire Plants • Auctions • Certified Appraisal Services • Asset repossession and disposition services. • Finance - leases, loans - working capital lines

7918 E. MCCLAIN DR., STE 101, SCOTTSDALE, AZ 85260

www.SwiftTool.com

Summit Machine Tool______ 800-654-3262 Laser Marking Machines MarkinBox_____________ 310-214-3367 Spinetti Machinery_______775-996-3770 Manual Mills And Lathes Ganesh Machinery_______818-349-9166 HS&S Machine Tool_______ 408-472-2436 KNUTH Machine Tools______ 847-415-3333 Machine Toolworks_______ 800-426-2052 North Western Machinery____ 206-583-2333 Sharp Machine Tool_______ 310-944-8016 Summit Machine Tool______ 800-654-3262 Swift Tool Co, Inc.________800-562-0900 Parts Washing Gosiger______________937-586-5067 Prototype Machines DATRON_____________ 480-826-3689 Robotics & Automatics Ganesh Machinery______818-349-9166 Saw Lubricants Saw Service Of WA_______ 360-738-6437 Sawing Machines Fahey Machinery Co., Inc.___ 503-620-9031 KNUTH Machine Tools______ 847-415-3333 North-South Machinery______562-690-7616 North Western Machinery____ 206-583-2333 Performance Machine Tools___ 510-249-1000 Rocky Mountain Saw Blades__ 303-761-3000 Rosco Precision Machinery___ 206-818-6813 Saw Replacement Parts Rocky Mountain Saw Blades__ 303-761-3000 Saw Service Of WA_______ 360-738-6437 Swift Tool Co, Inc.________800-562-0900 Saws Fahey Machinery Co., Inc.____503-620-9031 King Machine Inc.________ 509-435-6741 Production Machine Tools, Inc._ 425-881-1200 Sub Spindle Lathes Rosco Precision Machinery___ 253-333-2439 Swiss Screw Machines A2Z MANUFACTURING WEST COAST •

Spinetti Machinery______775-996-3770 Turning Centers Spinetti Machinery______775-996-3770 Used Wire EDM Machines Current EDM, Inc. ________ 612-840-0037 Desert EDM___________ 480-816-6300 EDM Network__________ 480-836-1782 MATERIAL Aluminum Bralco______________ 602-722-3324 Coast Aluminum_________ 877-398-6061 DIX Metals____________ 714-677-0788 Fry Steel_____________ 800-423-6651 Gorilla Metals Inc.________ 855-516-3825 Industrial Metal Supply Co.___ 818-729-3333 Ryerson Corporation______ 425-204-2601 Sunshine Metals_________ 760-579-8327 Aluminum Extrusions Aluminum Precision_______ 805-889-7569 Bralco______________ 602-722-3324 Armor:Commercial Kloeckner Metals________ 480-389-2883 Service Steel___________ 503-224-9500 Armor: Military Grade Kloeckner Metals________ 480-389-2883 Service Steel___________ 503-224-9500 Brass Bralco______________ 602-722-3324 Coast Aluminum_________ 877-398-6061 Coastal Metals__________ 800-811-7466 Fry Steel_____________ 800-423-6651 Gorilla Metals Inc.________ 855-516-3825 Industrial Metal Supply Co.___ 818-729-3333 Ryerson Corporation______ 425-204-2601 Sequoia Brass & Copper____ 800-362-5255 Bronze Coastal Metals__________ 800-811-7466 Sequoia Brass & Copper____ 800-362-5255 Carbon Steel Bralco______________ 602-722-3324

36 • JUNE- JULY 21

Coastal Metals__________ 800-811-7466 Fry Steel_____________ 800-423-6651 Laser Cutting Services, Inc___ 503-612-8311 Ryerson Corporation______ 425-204-2601 Cobalt Alloys United Performance Metals__ _888-282-3292 Copper Bralco______________602-722-3324 Coast Aluminum_________ 877-398-6061 Gorilla Metals Inc.________ 855-516-3825 Industrial Metal Supply Co.___ 818-729-3333 Ryerson Corporation______ 425-204-2601 Sequoia Brass & Copper____800-362-5255 Electrical Steels Fry Steel_____________ 800-423-6651 High Temperature Alloys Altemp Alloys__________ 800-227-8103 United Performance Metals__ _888-282-3292 Laser Cut Material Laser Cutting Services, Inc___ 503-612-8311 Lead Industrial Metal Supply Co.___ 818-729-3333 Material Sales Altemp Alloys__________ 800-227-8103 Coast Aluminum_________ 877-398-6061 Coastal Metals__________ 800-811-7466 Fry Steel_____________ 800-423-6651 Kloeckner Metals________480-389-2883 United Performance Metals__ _888-282-3292 Metals: Bar & Plate Altemp Alloys__________ 800-227-8103 Fry Steel_____________ 800-423-665 Ryerson Corporation______ 425-204-2601 Sequoia Brass & Copper____800-362-5255 Sunshine Metals_________ 760-579-8327 United Performance Metals__ _888-282-3292 Nickel Alloys Altemp Alloys__________ 800-227-8103 Fry Steel_____________ 800-423-6651 United Performance Metals__ _888-282-3292

Plate: Wear and Structural Kloeckner Metals_______ 480-389-2883 Ryerson Corporation______425-204-2601 United Performance Metals_ _888-282-3292 Precision Ground Flat SUN GRINDING________ 480-334-1005 Sheet & Coil Ryerson Corporation______425-204-2601 Stainless Steel & Steel Bralco_____________ 602-722-3324 Fry Steel_____________ 800-423-665 Gorilla Metals Inc._______ 855-516-3825 Industrial Metal Supply Co.__ 818-729-3333 Kloeckner Metals_______ 480-389-2883 Laser Cutting Services, Inc___ 503-612-8311 Ryerson Corporation_____ 425-204-2601 United Performance Metals_ _888-282-3292 Titanium Plate, Rod, Bar, & Wire Bralco_____________ 602-722-3324 Laube Technology_______ 888-355-2823 United Performance Metals_ _888-282-3292 Tool Steel Industrial Metal Supply Co.__ 818-729-3333 CNC MASTERCAM TRAINING

Streamingteacher.com METAL MARKING SYSTEMS

MarkinBox____________ 310-214-3367 METROLOGY PRODUCTS Hexagon_____________206-304-3847 Rosco Precision Machinery___253-333-2439 Metrology Hardware Hexagon_____________206-304-3847 Metrology Software Hexagon_____________206-304-3847 Portable Metrology Hexagon_____________206-304-3847 Metrology Scanners Hexagon_____________206-304-3847 Metrology Maintenence

Richard Amy Regional Sales Manager 8300 San Fernando road Sun Valley, Ca 91352 MONday - frIday 7:00 aM to 5:00 PM saTurday 8:00 aM to 2:00 PM

BARTON INTERNATIONAL

8300 San Fernando road Sun Valley, Ca 91352

PHONE (818) 729-3333 fax (818) 729-3377 suNvallEy@IMsMETals.COM www.INdusTrIalMETalsuPPly.COM

MONday - frIday 7:00 aM to 5:00 PM saTurday 8:00 aM to 2:00 PM

cell 951.551.2685 sales 800.741.7756 ramy@barton.com www.barton.com

MarkinBox_____________310-214-3367 Swift Tool Co, Inc._______ 800-562-0900 Notchers Fahey Machinery Co., Inc.___ 503-620-9031 Plasma/Gas Cutting Tools/Systems Fab - Line Machinery______ 206-972-6215 Rosco Precision Machinery___ 253-333-2439 Plate Bending & Rolls Fahey Machinery Co., Inc.___ 503-620-9031 Jorgensen Machine Tools____ 800-952-0151 Plasma/Gas Cutting Systems Production Machine Tools, Inc._ 425-881-1200 Power Tools Icon Machine Tool, Inc. _____ 360-434-8844 Icon Machine Tool, Inc. OR___ 503-887-1003 Presses Bixby Machine Tool Supply___509-534-1208 Press Brakes Fahey Machinery Co., Inc.___ 503-620-9031 North-South Machinery______562-690-7616 Production Machine Tools, Inc._ 425-881-1200 Revolution Machine Tools____ 385-355-0316 Punches Fahey Machinery Co., Inc.___ 503-620-903 Icon Machine Tool, Inc. _____ 360-434-8844 Icon Machine Tool, Inc. OR___ 503-887-1003 Revolution Machine Tools____ 385-355-0316 Rolling Machines Fahey Machinery Co., Inc.___ 503-620-9031 Revolution Machine Tools____ 385-355-0316 Shearing Machines Fab - Line Machinery______ 206-972-6215 Fahey Machinery Co., Inc.___ 503-620-9031 Icon Machine Tool, Inc. _____ 360-434-8844 North-South Machinery______562-690-7616 Revolution Machine Tools____ 385-355-0316 Sign & Graphic Cutting Solutions Tooling Fahey Machinery Co., Inc.___ 503-620-9031 Welding Equipment Rocky Mountain Saw Blades__ 303-761-3000 PALLET SYSTEMS Manual & Automatic Pallet Systems C

Hexagon_____________ 206-304-3847 NEW MACHINERY FABRICATION Production Machine Tools, Inc._ 425-881-1200 Fahey Machinery Co., Inc.___ 503-620-9031 Jorgensen Machine Tools_____800-952-0151 North-South Machinery______562-690-7616 Band & Cut Off Saws Fahey Machinery Co., Inc.___ 503-620-9031 North-South Machinery______ 562-690-7616 North Western Machinery____ 206-583-2333 Production Machine Tools, Inc._ 425-881-1200 Revolution Machine Tools____ 385-355-0316 Rosco Precision Machinery___ 253-333-2439 CNC Turret Punches Muratec_____________ 949-466-8255 Drill Lines Fahey Machinery Co., Inc.___ 503-620-9031 Cold Saws/Saws Fahey Machinery Co., Inc.__ _503-620-9031 Hydmech Sawing Solutions____714-620-5560 KNUTH Machine Tools______ 847-415-3333 Hardware Insertion Fahey Machinery Co., Inc.___ 503-620-9031 Iron Workers Fahey Machinery Co., Inc.___ 503-620-9031 Jorgensen Machine Tools_____800-952-0151 Production Machine Tools, Inc._ 425-881-1200 Revolution Machine Tools____ 385-355-0316 Laser & Fiber Laser Machines Fahey Machinery Co., Inc.___ 503-620-9031 North-South Machinery______ 562-690-7616 Production Machine Tools, Inc._ 425-881-1200 Revolution Machine Tools____ 385-355-0316

CMY

Systems

Robotic Part Loading Systems Midaco Corporation_______ 847-593-8420 Acieta____________ 402-650-8132 8300 San Fernando road 8300 San Fernando road Sun Valley, Ca 91352 Sun Valley, Ca 91352 Manual Rotory Pallet Systems Midaco Corporation_______ 847-593-8420 Midaco Corporation_______ 847-593-8420 Ready-Robotics__________833-732-3967 MONday - frIday 7:00 aM to 5:00 PM saTurday 8:00 aM to 2:00 PM

PHONE (818) 729-3333 fax (818) 729-3377 suNvallEy@IMsMETals.COM www.INdusTrIalMETalsuPPly.COM

MONday - frIday 7:00 aM to 5:00 PM saTurday 8:00 aM to 2:00 PM

Shipping Solutions

Olympus Controls_________503-582-8100

Perry Pallet Co._________ 360-366-5239 Wood Pallets

ROBOTIC AUTOMATION/

Perry Pallet Co._________ 360-366-5239 PRECISION TOOLHOLDING PRODUCTS Tooling Von Ruden Manufacturing, Inc.__ 763-682--3122 Tooling Systems Von Ruden Manufacturing, Inc.__ 763-682--3122 PRODUCTIVITY Productivity Tools and Systems Scout Systems__ _________253-329-2460 8300 San Fernando road Sun Valley, Ca 91352

MONday - frIday 7:00 aM to 5:00 PM saTurday 8:00 aM to 2:00 PM

PHONE (818) 729-3333 fax (818) 729-3377 suNvallEy@IMsMETals.COM www.INdusTrIalMETalsuPPly.COM

8300 San Fernando road Sun Valley, Ca 91352

MONday - frIday 7:00 aM to 5:00 PM saTurday 8:00 aM to 2:00 PM

PHONE (818) 729-3333 fax (818) 729-3377 suNvallEy@IMsMETals.COM www.INdusTrIalMETalsuPPly.COM

PROG. SYSTEMS

ROBOTIC INTEGRATION Acieta____________ 402-650-8132 8300 San Fernando road Sun Valley, Ca 91352

ROBOTIC PRODUCTS Cobots

MONday - frIday 7:00 aM to 5:00 PM saTurday 8:00 aM to 2:00 PM

PHONE (818) 729-3333 fax (818) 729-3377 suNvallEy@IMsMETals.COM www.INdusTrIalMETalsuPPly.COM

Acieta____________ 402-650-8132 Fanuc Robots Acieta____________ 402-650-8132 Gripper Systems 8300 San Fernando road Sun Valley, Ca 91352 Acieta____________ 402-650-8132 MONday - frIday 7:00 aM to 5:00 PM saTurday 8:00 aM to 2:00 PM

PHONE (818) 729-3333 fax (818) 729-3377 suNvallEy@IMsMETals.COM www.INdusTrIalMETalsuPPly.COM

Robotic Welding Cells

Acieta____________ 402-650-8132 Factory Automation/Logistics ROBOT MAINTENANCE North-South Machinery______ 562-690-7616 Acieta____________ 402-650-8132 CAD/CAM Software, CAD Applied CAx____________503-962-0287 ROBOT TRAINING Automatics & Machinery Co.__303-990-6190 Acieta____________ 402-650-8132 MRP Software ROUTERS SigmaTEK_____________ 513-595-2022 Rosco Precision Machinery___ 253-333-2439 Nesting Software SigmaNEST____________ 513-595-2022 SHOT PEEN MARKING Shot Peen Software, Solid Modeling

Delcam Software_________ 877-DELCAM1 MarkinBox_____________310-214-3367 PROTOTYPE MACHINERY SAWS Santa Cruz Electronics_______831-479-5444 Band & Cut-Off Saws REAL ESTATE- COMMERCIAL Swift Tool Co, Inc._______ 800-562-0900 Capacity Commercial Group___503-326-9000 SERVICES REPAIR CNC-PROS_____________ 602-344-9753 AS9100 Registration Bar Feeder Repair Great Western Registrar_____ 623-580-1881 Edge Technologies________ 951-440-1574 Custom Packaging/Shipping RIGGING AND CARRIERS Supplies IRH Carriers & Rigging______ 435-230-1779 Alliance Packaging_______ 206-445-5898-

Engineering/Mechanical Design Sherpa Design__________503-771-3570 Acieta____________ 402-650-8132 Magnetic Drills/Cutters Financial Services Ellison Technologies________ 206-669-3578 Innovative Tool Sales______ 714-780-0730 Expand Machinery_______818-349-9166 Intech Funding_________ 800-553-9208 Material Handling Systems LMI Machinery Inc.________ 866-437-7315 Quick Turn Financial______ 415-608-5692 Hydmech Sawing Solutions____714-620-5560 Midaco Corporation_______847-593-8420 Ready-Robotics__________833-732-3967 Machine Tool Rebuilding Metal Marking Systems Manual Lift Off Pallet EDM Network__________ 480-836-1782 Olympus Controls_________503-582-8100 Kwik Mark Inc__________ 815-363-8268 ROBOTICS

A2Z MANUFACTURING WEST COAST •

37 • JUNE- JULY 21

BMSC_______________ 602-445-9400 ISO / AS9100 Certification BMSC_______________ 602-445-9400 Productivity Training BMSC_______________ 602-445-9400 USED MACHINERY Kim@A2Zmanufacturing.com

GMN USA LLC___________800-686-1679

The Buyers Guide Reaches Over 14,000 Decision Makers In The West Coast Region WA, OR, & CA! What you get: FREE PR and 6 Categories with your company name and Phone # Only $260 For A Full Year!

TRAINING ISO Consulting/Registration BMSC_______________ 602-445-9400 Lean and NADCAP Consulting Training

Call Now For More Information!

480-773-3239 Kim@A2ZManufacturing.com

Management Systems Training BMSC_______________602-445-9400 SOFTWARE CAD CAM Machining Applied CAx___________ 503-962-0287 Cimatron________248-596-9700 ext. 237 Solid Products__________ 480-206-0330 Spinetti Machinery_______775-996-3770 Mechanical Design Cimatron________248-596-9700 ext. 237 Delcam_____________ 877-335-2261

Sherpa Design__________503-771-3570 SPINDLES & SLIDES Spindle Rebuilding/Repair C & M Precision Spindle, Inc.__ 503-691-0955 GMN USA LLC__________ 800-686-1679 Spindle Sales New A2Z MANUFACTURING WEST COAST •

38 • JUNE- JULY 21

EDM Network_ __________480-836-1782 Jorgensen Machine Tools_____ 800-952-0151 K.D. Capital Equipt________ 480-922-1674 North Western Machinery_____ 206-583-2333 Performance Machine Tools ___ 510-760-9518 ZACHMAN MachineRY INC. ____ 602-908-3447 WATERJET CUTTING Fahey Machinery Co., Inc._____ 503-620-9031

Flow Internatil__________ 909-620-5707 Machine Toolworks_______ 800-426-2052

Waterjet & Blast Abrasives, Garnetentury Barton International______ 800-741-7756 GMA Garnet Group _______ 832-243-9300 Waterjet Bricks Barton International______ 800-741-7756 GMA Garnet Group _______ 832-243-9300 Waterjet Hoppers GMA Garnet Group _______ 832-243-9300 Waterjet Replacement Parts Barton International______ 800-741-7756 EDM Performance________ 800-336-2946

Buyer’s Guide & Card Gallery Processes

BRIAN SMITH

President bsmith@albinaco.com Cell (503) 997-6464 Ofﬁce (503) 692-6010

“YOUR STEEL BENDING EXPERTS” www.albinaco.com 12080 SW Myslony St. Tualatin, OR 97062

Scan for Company Directory

The Manufacturer’s Secret Weapon

ASSEMBLIES

Evans Precision__________ 623-582-4776

LASER CUTTING

Precision Aerospace, LLC_____ 602-352-8658

SMH Inc LLC____________ 360-341-2226 Ponderosa Ind____ _______303-298-1801 FLATLINE FAB___________ 503-707-9272

EDM: Ram-Type (Sinking)

BENDING

Specialty Steel Services______ 801-539-8252

DIE CASTING

Micropulse West, Inc._______ 480-966-2300

Mandrel

CASTING

SMH Inc LLC____________ 360-341-2226

Albina Co., Inc. __________ 866-252-4628 Precision Enterprises Inc._____ 851-797-1000 TVT Die Casting__________ 800-280-2278 Aeroform, Inc. __________ 360-403-1919

Investment Casting-Precision

Speciality Bending

Dolphin Investment Castings___ 602-272-6747

DIES

AZ Tool Steel____________ 877-795-1600

Precision Aerospace, LLC_____ 602-352-8658 Stevens Tool & Die_________ 503-682-3185 EDM Solutions

Tool & Dies Albina Co., Inc. __________ 866-252-4628 Precision Enterprises Inc._____ 851-797-1000 Micropulse West Inc.________ 480-966-2300 Bending Solutions, Inc.______ 360-651-2443 DEBURRING CHEMICAL ETCHING Structrual Bending CMR Manufacturing________ 602-273-0943 Industrial Precision Grinding____310-352-4700 Albina Co., Inc. __________ 866-252-4628 PAS Technologies_________ 602-744-2600 DESIGN Tube and Pipe Bending FLATLINE FAB___________ 503-707-9272 COATING Albina Co., Inc. __________ 866-252-4628 EDGING Bolts Metalizing-CWST______602-244-2432 BRAZING-JOINING United Performance Metals___ _888-282-3292 COLD FORMING Cogitic_______________ 719-473-8844 EDM Evans Precision__________ 623-582-4776 ATF Aerospace, LLC..________ 480-218-0918 EDM: Dialectric Systems PAS Technologies_________ 602-744-2600 CUTTING /Filtration Precision Casting Repair______ 801-972-2345 Bar & Plate & Die Cutting Ebbco Inc______________586-716-5151 Brazing:

Milco Wire EDM,, Inc._______ 714-373-0098

EDM: Drilling Small Hole

EDM: Wire Clings Aerospace_________ 480-968-1778 Evans Precision__________ 623-582-4776 Micropulse West, Inc._______ 480-966-2300 Milco Wire EDM,, Inc._______ 714-373-0098 Micropulse West, Inc._______ 480-966-2300 Plastic Injection Molding_____ 509-531-2634 Precision Aerospace, LLC_____ 602-352-8658 Stevens Tool & Die_________ 503-682-3185 ELECTRO MECHANICAL Sub-Assembly Builds Cascade Systems Technology___ 503-640-5733 ENGINEERING/DESIGN

Bolts Metalizing-CWST______602-244-2432 FLATLINE FAB___________ 503-707-9272 Layke Inc._____________ 602-272-2654 ATF Aerospace, LLC..________ 480-218-0918 BROACHING

Industrial Precision Grinding___ 310-352-4700 Milco Waterjet___________ 714-373-0098 Cascade Systems Technology___ 503-640-5733 A2Z MANUFACTURING WEST COAST •

39 • JUNE- JULY 21

FLATLINE FAB___________ 503-707-9272

Solid Form Fabrication______ 503-435-1400

Extrusions

Weiser Engineering_________303-280-2778

Plastic Extrusion Services

Tube & Pipe Bending Fabrication

Inline Plastics Inc._________ 909-923-1033 FABRICATION Architectural Forming & Fabrication Albina Co., Inc. __________ 866-252-4628

Precision Aerospace, LLC_____ 602-352-8658 SMH Inc LLC____________ 360-341-2226

FLATLINE FAB___________ 503-707-9272 Weiser Engineering________303-280-2778 Fabrication: Sheet Metal Aeroform, Inc. __________ 360-403-1919

Wrico_______________480-892-7800 Forming & Fabrication

Aero Tech MFG___________ 801-891-2740 Albina Co., Inc. __________866-252-4628 American Precision Ind.._______503-784-5211 Bending Solutions, Inc.______ 360-651-2443 CLS Fabrication Inc________ 800-426-0721 FLATLINE FAB___________ 503-707-9272 FLATLINE FAB___________ 503-707-9272

Industrial Thermoplastics

NW Metalcraft Industries_____ 888-280-7080 Clevland Electric Labs. ______ 480-967-2501 Mountain View Machine______ 435-755-0500

Precision Sheet Metal Fabrication:

Precision Aerospace, LLC_____ 602-352-8658

Medium & Large

QUAL-FAB, Inc.____________206-762-2117 SMH Inc LLC____________ 360-341-2226

Aeroform, Inc. __________ 360-403-1919 American Precision Ind..____503-784-5211 CLS

Weiser Engineering________ 303-280-2778 FLATLINE FAB___________ 503-707-9272 Fabrication: Custom Metal

Group Mfg Serv__________480-966-3952

A2Z MANUFACTURING WEST COAST

• 40 • JUNE- JULY 21

PAS Technologies_________ 602-744-2600 Liquid Painting

Bending Solutions, Inc._______ 360-651-2443

Aero Tech MFG___________ 801-891-2740

FIBER OPTICS TESTING

Frontier Group__________602-437-2426

Clevland Electric Labs. _______ 480-967-2501 MPI International_________956-631-6880 FINISHING Advanced Precision Anodizing____ 503-661-6700

PAS Technologies_________ 602-744-2600 Passivation

American Precision Ind.._______ 503-784-5211 Coating Technologies_______623-581-2648 Arizona Hard Chrome________ 602-278-8671

Frontier Group__________602-437-2426

Coating Technologies________623-581-2648

Polishing

FLATLINE FAB____________ 503-707-9272 Arizona Hard Chrome_______ 602-278-8671 Leadtek Plating___________ 503-682-4410

Powder Coating

PAS Technologies__________602-744-2600

Aero Tech MFG___________ 801-891-2740

Real Axis Machining_________360-723-5386 CLS Fabrication Inc________ 800-426-0721 Titanium Coating Services______562-548-2550

Sandblasting

DRY FILM LUBRICATION

Byington Steel Treating, Inc.____408-727-6630

Bolts Metalizing-CWST______602-244-2432

Shot Peen

Frontier Group__________602-437-2426 PAS Technologies_________ 602-744-2600

Galvanizing: Hot Dip

Group Mfg Serv__________ 480-966-3952 QUAL-FAB, Inc.___________ 206-762-2117 TMM Precision ___________800-448-9448 Industrial Machine Svcs______ 503-240-0878 SMH Inc LLC____________ 360-341-2226

Coating Technologies_______623-581-2648

Albina Co., Inc. ___________866-252-4628

American Precision Ind.._______503-784-5211 Industrial Machine Svcs______ 503-240-0878 Leadtek Plating___________ 503-682-4410 FLATLINE FAB___________ 503-707-9272 Precision Aerospace, LLC_____ 602-352-8658

Byington Steel Treating, Inc.____408-727-6630

Glass Bead Clean

Silk Screening Arizona Finishing_________602-438-4443 FIXTURING Real Axis Machining________360-723-5386

Shawn Carlin scarlin@gmsaz.com

Tyler Acheson

Territory Sales Manager

FANUC Master Certiﬁed Service Engineer Council Bluﬀs, IA | Waukesha, WI | Huntington Beach, CA

Rich Schwab

Sr. Sales Representative 402.650.8132 844-4-ACIETA

361 South 52nd Street • Tempe, AZ 85281 Phone: 480-967-2501 • Fax: 480-967-2530 rschwab@cel-atg.com Cell: 480-375-1437

MOBILE PARTS & 24/7 SERVICE

tacheson@acieta.com www.acieta.com

www.clevelandelectriclabs.com

Delivering Tomorrow’s Automation Today

Diversified Metal Services_____ 801-972-6093

GASKETS

Grinding: Surface

ISO/IEC 17025

ABS Heat Treating_________602-437-3008

3-D Plastics, Inc.__________ 503-720-0572 Evans Precision__________ 623-582-4776 Industrial Precision Grinding___ 310-352-4700

Byington Steel Treating______408-727-6630

Industrial Precision Grinding___ 310-352-4700 StandardAero___________ 602-744-2600

Phoenix Heat Treating_______602-258-7751

GRINDING

Superior Grinding_________ 801-487-9700 AZ Hard Chrome__________ 602-278-8671 Steel Services Grinding______ 800-662-0126 AZ Tool Steel____________ 877-795-1600 Sun Grinding___________ 602-238-9595

Grinding: Tool & Cutter

Superior Grinding_________888-487-9701 ChemResearch___________ 602-253-4175 Superior Grinding_________ 801-487-9700 Swift Tool Co, Inc._________800-562-0900 Grinding, Centerless Cogitic_______________ 719-473-8844 Evans Precision__________ 623-582-4776 LV Swiss ______________ 435-635-1482

Heat Treating/NADCAP ABS Heat Treating_________602-437-3008 Byington Steel Treating______408-727-6630 Phoenix Heat Treating_______602-258-7751 Large Capacity Drop Bottom

GUN DRILLING

Industrial Machine Svcs______ 503-240-0878 Ron Grob Co____________ 970-667-5320 Evans Precision__________ 623-582-4776

Oven/Aluminum

HEAT TREATING

Byington Steel Treating______408-727-6630

ABS Heat Treating_________602-437-3008

MET-TEK Heat Treating______503-519-9864

Mountain View Machine______ 435-755-0500 Industrial Precision Grinding___ 310-352-4700

Byington Steel Treating_____408-727-6630

HONING/LAPPING

Ron Grob Co____________ 970-667-5320 Sun Grinding___________ 602-238-9595

Controlled Thermal Tech_____602-272-3714

PAS Technologies_________ 602-744-2600

StandardAero___________ 602-744-2600 TCI Precision Metals________ 800-234-5613 Evans Precision__________ 623-582-4776

Precision Aerospace, LLC_____ 602-352-8658

Steel Services Grinding______ 800-662-0126

MET-TEK Heat Treating______503-519-9864

Portland Precision Manufacturing_ 503-253-6700

Sun Grinding___________ 602-238-9595 Arizona Hard Chrome_______ 602-278-8671 PAS Technologies_________ 602-744-2600

Real Axis Machining________ 360-723-5386

Phoenix Heat Treating______602-258-7751

Ron Grob Co____________ 970-667-5320

Cryogenics

SMH Inc LLC____________ 360-341-2226

Industrial Precision Grinding___ 310-352-4700 Sun Grinding___________ 602-238-9595 LV Swiss ______________ 435-635-1482

Grinding, Double Disc

Grinding: OD

Superior Grinding_________ 801-487-9700 Precision Tech___________ 801-285-7288 Grinding, Blanchard

Ron Grob Co____________ 970-667-5320

AZ Tool Steel____________ 877-795-1600 Sun Grinding___________ 602-238-9595 Phoenix Heat Treating_______ 602-258-7751 Bourdelais Grinding Co., Inc.___ 805-583-9966 Superior Grinding_________ 801-487-9700 A2Z MANUFACTURING WEST COAST

• 41 • JUNE- JULY 21

Heat Treating/ISO/AS9100

Sunshine Metals___________714-225-4972 Treske Precision Machining _____503-625-2821

A2Z MANUFACTURING WEST COAST

• 41 • JUNE- JULY 21

Passivation, Electroless Nickel, Gold, Hard Chrome, Silver, & Tin Plating. 206-947-4052 geoffs@askogroup.com TVT Die Casting__________ 800-280-2278 Clevland Electric Labs. _______480-967-2501 Alpha Precision Machining, Inc. __ 253-395-7381 VWeiser Engineering_______ 303-280-2778 Newport Tool.____________ 801-295-7411 American Precision Ind..______ 503-784-5211 Industrial Thermoplastics

Portland Precision Manufacturing_ 503-253-6700 Cascade Engineering Tech ____ 503-266-1300

Clevland Electric Labs. _______480-967-2501 Real Axis Machining________ 360-723-5386 Ron Grob Co____________ 970-667-5320

Machining: 5-Axis Accutech Machine Inc________ 801-975-1117 American Precision Ind.._______ 503-784-5211 Cascade Engineering Tech _____503-266-1300 Strom Manufacturing________ 503-447-1021 Machining: Aerospace

SMH Inc LLC_____________360-341-2226 Strom Manufacturing________503-447-1021 Treske Precision Machining _____503-625-2821 TVT Die Casting__________ 800-280-2278 Machining: CNC Milling Accutech Machine Inc________ 801-975-1117

Machining: Medical American Precision Ind..______ 503-784-5211 Cascade Engineering Tech ____ 503-266-1300 Flex-Pro Manufacturing.______623-466-6866 Portland Precision Manufacturing_503-253-6700 Teton Machine __________208-642-9344

Machining: Turning Accutech Machine Inc________801-975-1117 American Precision Ind..______ 503-784-5211 ATF Aerospace, LLC..________ 480-218-0918 Clevland Electric Labs. ______ 480-967-2501 Die-Tech Precision Machining____ 669-888-350

Machining: Production

Faustson______________ 303-420-7422 American Precision Ind.._______ 503-784-5211 American Precision Ind.._______ 503-784-5211 Accutech Machine Inc_______ 801-975-1117 Flex-Pro Manufacturing.______ 623-466-6866 ATF Aerospace, LLC.._________ 480-218-0918 ATF Aerospace, LLC.._________480-218-0918 American Precision Ind..______ 503-784-5211 Grovtec US, Inc. __________ 503-557-4689 Clevland Electric Labs. _______480-967-2501 Cascade Engineering Tech _____503-266-1300 ATF Aerospace, LLC..________ 480-218-0918 Howard Precision Machined Prod._ 801-619-9850 Flex-Pro Manufacturing.______ 623-466-6866 Clevland Electric Labs. _______480-967-2501 Cascade Engineering Tech ____ 503-266-1300 Larkin Precision Machine_____ 831-438-2700 Larkin Precision Machine______831-438-2700 Die-Tech Precision Machining____669-888-3500 Clevland Electric Labs. ______ 480-967-2501 Layke Inc._____________ 602-272-2654 Layke Inc._____________ 602-272-2654 Faustson______________ 303-420-7422 Die-Tech Precision Machining____ 669-888-350 LV Swiss ______________ 435-635-1482 LV Swiss ______________ 435-635-1482 Flex-Pro Manufacturing.______ 623-466-6866 Flex-Pro Manufacturing.______623-466-6866 Portland Precision Manufacturing_ 503-253-6700 Precision Aerospace, LLC_____ 602-352-8658 Grovtec US, Inc. __________ 503-557-4689 Grovtec US, Inc. __________ 503-557-4689 Real Axis Machining________ 360-723-5386 Portland Precision Manufacturing_ 503-253-6700 Layke Inc._____________ 602-272-2654 LV Swiss ______________ 435-635-1482 Ron Grob Co____________ 970-667-5320 Strom Manufacturing________ 503-447-1021 Micropulse West, Inc._______ 480-966-2300 Newport Tool.____________801-295-7411 =SMH Inc LLC____________ 360-341-2226 SMH Inc LLC_____________360-341-2226 Precision Aerospace, LLC_____ 602-352-8658 Portland Precision Manufacturing_503-253-6700 Strom Manufacturing_______ 503-447-1021 Teton Machine __________ 208-642-9344 Portland Precision Manufacturing_ 503-253-6700 Strom Manufacturing_______ 503-447-1021 Teton Machine __________ 208-642-9344 Treske Precision Machining _____503-625-2821 Real Axis Machining________ 360-723-5386 Teton Machine __________208-642-9344 Machining: Ultra Precision Machining: Ceramics Advanced Ron Grob Co____________ 970-667-5320 LV Swiss ______________ 435-635-1482 Machining: Swiss O’Keefe Ceramics__________719-687-0888 SMH Inc LLC____________ 360-341-2226 Strom Manufacturing________503-447-1021 Grovtec US, Inc. __________ 503-557-4689 Pacific Swiss & Manufacturing__ 503-557-9407 Machining: Proto-R & D American Precision Ind.._______ 503-784-5211 Teton Machine __________ 208-642-9344 ATF Aerospace, LLC.._________ 480-218-0918

Machining: Large

LV Swiss ______________ 435-635-1482 Machining: Turning With Live Tooling Pacific Swiss & Manufacturing__ 503-557-9407 ATF Aerospace, LLC..________ 480-218-0918

Cascade Engineering Tech _____503-266-1300 Accutech Machine Inc________ 801-975-1117 Teton Machine __________208-642-9344 LV Swiss ______________ 435-635-1482 A2Z MANUFACTURING WEST COAST

• 42 • JUNE- JULY 21

METAL FABRICATION: DESIGN, LASER CUTTING, FORMING, WELDING, CUSTOM FINISHING 4322 NW Yeon Ave., Portland, OR 97210 Josh Henry: 503.707.9272 503.477.7566 WWW.FLATLINEFAB.COM

Aero Tech MFG__________ 801-891-2740

Surface Mount & Thru Hole

Custom Airplane to Marine Polishing Cascade Systems Technology___ 971-330-8054

Weiser Engineering_______ 303-280-2778 MANUFACTURING VALUE ADDED Contract Manufacturing AATC________________602-268-1467 Aeroform, Inc. __________ 360-403-1919

Metal Polishing By Timothy___ 503-253-5294

PAINTING

Personal Collectables Polishing

FLATLINE FAB___________ 503-707-9272

Metal Polishing By Timothy___ 503-253-5294 StandardAero___________ 602-744-2600 Production Polishing Metal Polishing By Timothy____ 503-253-5294 METALIZING Controlled Thermal Tech _____ 602-272-3714

Albina Co., Inc. _________ 866-252-4628

MOLDING: RUBBER

Alpha Precision Machining, Inc. __ 253-395-7381

Molds: Plastic Injection

Advanced Precision Anodizing___ 503-661-6700 ASKO Group_____________206-947-4052

PLASTIC EXTRUSION

ChemResearch____________602-253-4175

Custom Plastic Profiles

EPSI_________________ 714-519-9423

Inline Plastics Inc._________ 909-923-1033 Frontier Group____________602-437-2426 Custom Plastic Tubing

Foresight Finishing_________480-772-0387

Inline Plastics Inc._________ 909-923-1033 Leadtek Plating___________503-682-4410 Custom Thermoplastics

StandardAero___________ 602-744-2600

American Precision Ind..______ 503-784-5211

Plastic Injection Molding_____ 509-531-2634 Inline Plastics Inc._________ 909-923-1033

ATF Aerospace, LLC..________ 480-218-0918

SMH Inc LLC____________ 360-341-2226

Bending Solutions, Inc.______360-651-2443

MOLDS

Clevland Electric Labs. ______ 480-967-2501

Aero Tech MFG____________801-891-2740

CLS Fabrication Inc________ 800-426-0721

Advanced Mold Technology_____714-990-0144 Inline Plastics Inc._________ 909-923-1033 Leadtek Plating___________503-682-4410

FLATLINE FAB___________ 503-707-9272

Arizona Finishing_________ 602-438-4443

Flex-Pro Manufacturing._____ 623-466-6866

Milco Wire EDM,, Inc._______ 714-373-0098 Inline Plastics Inc._________ 909-923-1033

G & G Custom Metal Fab_____503-931-7069

Plastic Injection Molding_____ 509-531-2634

PLASTIC MACHINING

Molds: High Volume Class 100

Portland Precision Manufacturing_ 503-253-6700

Bright Tin

Advanced Mold Technology____ 714-990-0144

PLASTIC MOLDING

Foresight Finishing_________480-772-0387

Group Mfg Serv_________ 480-966-3952 LV Swiss ______________435-635-1482 Portland Precision Manufacturing_503-253-6700 Teton Machine _________ 208-642-9344 Treske Precision Machining ____503-625-2821 TVT Die Casting_________ 800-280-2278 Industrial Manufacturing Albina Co., Inc. _________ 866-252-4628 Machinists Inc.___________360-202-7342 Turnkey Product Services

Extrusion Die Development

Anodizing Advanced Precision Anodizing___ 503-661-6700

Inline Plastics Inc._________ 909-923-1033 ChemResearch____________602-253-4175 Custom Plastic Spiraling

Custom Plastic Finishing

Frontier Group____________602-437-2426

StandardAero___________ 602-744-2600 Black Oxide StandardAero___________ 602-744-2600

Molds: Fast Turn Prototype and

3-D Plastics, Inc.__________ 503-720-0572 Leadtek Plating___________503-682-4410

Bridge Molds

Plastic Injection Molding_____ 509-531-2634 Precious Metal Plating Co.______800-481-6271

Advanced Mold Technology____ 714-990-0144 SMH Inc LLC____________ 360-341-2226 Molds: Expertise in Overmold and Insert Molding

Mold Making

Chem Film Frontier Group____________602-437-2426

3-D Plastics, Inc.__________ 503-720-0572 Savon Plating, Inc__________ 602-252-4311

Advanced Mold Technology____ 714-990-0144 Plastic Injection Molding_____ 509-531-2634 StandardAero___________ 602-744-2600 PC BOARDS

PLATING

Chromate\ A2Z MANUFACTURING WEST COAST •

43 • JUNE- JULY 21

PAS Technologies__________602-744-2600

Advanced Precision Anodizing____503-661-6700

Precious Metal Plating Co.______ 800-481-6271

Chrome/Nickel/Palladium/Teflon AZ Hard Chrome___________602-278-8671

1538 E La Vieve Lane, Tempe, AZ 85284

Tin Plating

EPSI_________________714-519-9423 Electro-Polishing

Leadtek Plating___________ 503-682-4410

Savon Plating, Inc__________ 602-252-4311 ASKO Group____________ 206-947-4052 StandardAero____________602-744-2600

Embrittlement Relief EPSI________________ 714-519-9423

Coating

Coating Technologies________ 623-581-2648 Savon Plating, Inc_________ 602-252-4311 Electroless Nickel

Controlled Thermal Tech ______ 602-272-3714 Coating: Black Oxide

ASKO Group____________ 206-947-4052

Coating Technologies________ 623-581-2648 Foresight Finishing________ 480-772-0387 PAS Technologies__________602-744-2600 Leadtek Plating__________ 503-682-4410 Coating: Dry Film Lube

Precious Metal Plating Co._____ 800-481-6271

Coating Technologies________ 623-581-2648 Savon Plating, Inc_________ 602-252-4311 Leadtek Plating___________ 503-682-4410 StandardAero___________ 602-744-2600 Glass Bead Clean

StandardAero____________602-744-2600 Coating: Nickel/ Teflon/Chrome

Savon Plating, Inc__________ 602-252-4311

StandardAero___________ 602-744-2600 Gold

Coating Technologies________ 623-581-2648

Leadtek Plating___________ 503-682-4410 ASKO Group____________ 206-947-4052

NAD CAP & Boeing Approved

Precious Metal Plating Co.______ 800-481-6271

Processes

Leadtek Plating___________503-682-4410

Precious Metal Plating Co._____ 800-481-6271

Zinc Nickel

Nickel-Bright

PAS Technologies__________602-744-2600

Foresight Finishing________ 480-772-0387

PLASMA CUTTING

Leadtek Plating__________ 503-682-4410 G & G Custom Metal Fab______503-931-7069 Precious Metal Plating Co._____ 800-481-6271

PRECISION FORMING

Passivation

Aeroform, Inc. __________360-403-1919

ASKO Group____________ 206-947-4052 Pacific Tool, Inc___________425-882-1970 Frontier Group___________ 602-437-2426 QUAL-FAB, Inc.____________ 206-762-2117 Leadtek Plating__________ 503-682-4410 SpringWorks Utah__________ 801-298-0113 PAS Technologies_________ 602-744-2600 Wrico________________480-892-7800 Phosphate Frontier Group___________ 602-437-2426 Shot Peen PAS Technologies_________ 602-744-2600 Tin / Zinc Plate

PROCESSING: METAL Chemical LA Specialties____________ 602-269-7612 PROTOTYPES

EPSI________________ 714-519-9423

ASKO Group____________ 206-947-4052 Cascade Systems Technology____503-640-5733

Coating Technologies________ 623-581-2648 Foresight Finishing________ 480-772-0387

EPSI________________ 714-519-9423 NW Rapid Mfg.___________503-434-8557

Savon Plating, Inc__________ 602-252-4311 Leadtek Plating__________ 503-682-4410

Leadtek Plating__________ 503-682-4410

Coating:Zinc & Mag.Phos.

Precious Metal Plating Co._____ 800-481-6271

Copper

Foresight Finishing_________ 480-772-0387 PAS Technologies_________ 602-744-2600

Silver Plating

Group Manufacturing Serv_____480-966-3952

ASKO Group____________ 206-947-4052 QUAL-FAB, Inc.____________ 206-762-2117

Arizona Hard Chrome_______ 602-278-8671

EPSI________________ 714-519-9423 Weiser Engineering_________303-280-2778

Frontier Group____________ 602-437-2426 ASKO Group____________ 206-947-4052 A2Z MANUFACTURING WEST COAST

Savon Plating, Inc_________ 602-252-4311 CLS Fabrication Inc_________800-426-0721

Hard Chrome

StandardAero____________602-744-2600 Drylube

PUNCHING

• 44 • JUNE- JULY 21

Leadtek Plating__________ 503-682-4410

RECYCLING MATERIALS

602-437-3008, abs@absheattreat.com

Aluminum, Brass, Copper, Nickel, Plastics, Stainless Steel, Steel, Tin Metro Metals Northwest _____ 503-819-1284 Bin Service Metro Metals Northwest _____ 503-819-1284

SPINNING

Frontier Group___________602-437-2426 United Performance Metals_____888-282-3292

Evans Precision__________ 623-582-4776 PAS Technologies_________602-744-2600 SPLINES

Turbine Instrument Testing

Specialty Steel Services______ 801-539-8252 Clevland Electric Labs. ______480-967-2501 SPRINGS

THERMAL SPRAY

5-Axis Waterjet Cutting Rickard Engineering ________866-845-8838

ASK ABOUT OUR FREE

Excess Material Handling

Ace Wire & Spring Form______ 412-458-4830 Bolts Metalizing-CWST______602-244-2432

PR ANNOUNCEMENTS!!!

Metro Metals Northwest _____ 503-819-1284

SpringWorks Utah_________ 801-298-0113 Controlled Thermal Tech _____ 602-272-3714

300 WORDS WITH A

Full Service Scrap Management Metro Metals Northwest _____ 503-819-1284 Wood Products Perry Pallet Co.__________ 360-366-5239

SPRINGS: CUSTOM

THREAD ROLLING

PICTURE IN THE FRONT

Extension/Compression/ Coil

Ron Grob Co____________970-667-5320

OF THE MAGAZINE!!!

Ace Wire & Spring Form______ 412-458-4830

TOOL & DIE DESIGN

STAMPING PRECISION

ATF Aerospace, LLC..________ 480-218-0918

REPAIR

AEI Fabrication__________ 480-733-6594 Newport Tool.___________ 801-295-7411

CNC-PROS_____________ 602-344-9753

NW Metalcraft Industries_____ 888-280-7080 Wrico_______________480-892-7800

ROLLING Albina Co., Inc. __________ 866-252-4628 ROLL FORMING

Precision Die & Stamping_____ 480-967-2038

TOOLING

SpringWorks Utah_________ 801-298-0113 Industrial Machine Svcs______503-240-0878 Stamping:Design

Mountain View Machine______435-755-0500

ATF Aerospace, LLC..________ 480-218-0918

ATF Aerospace, LLC..________ 480-218-0918 Newport Tool.___________ 801-295-7411

SANDBLASTING

SpringWorks Utah_________ 801-298-0113 Real Axis Machining________360-723-5386

Advanced Precision Anodizing___ 503-661-6700 Byington Steel Treating, Inc.____ 408-727-6630 Production Sawing Bourdelais Grinding Co., Inc.___ 805-583-9966 SEWING Grovtec US, Inc. __________ 503-557-4689 SHEARING United Performance Metals___ _888-282-3292 SIGNAGE & DISPLAYS Milco Wire EDM,, Inc._______ 714-373-0098 SILICONE 3-D Plastics, Inc.__________ 503-720-0572 SINTERING Western Sintering_________ 509-375-3096

Stamping:Flat Forming ATF Aerospace, LLC..________ 480-218-0918

TUBE BENDING & CUTTING FAB

NW Metalcraft Industries_____ 888-280-7080 Albina Co., Inc. __________866-252-4628 SpringWorks Utah_________ 801-298-0113 Bending Solutions, Inc.______360-651-2443 Stamping: Light

Clings Aerospace_________480-968-1778

ATF Aerospace, LLC..________ 480-218-0918 EZ-ACCESS_____________800-258-8503 SpringWorks Utah_________ 801-298-0113 Stamping: Production/ Precision

TURBINE ENGINE TESTING Clevland Electric Labs. ______480-967-2501 WATERJET CUTTING

ATF Aerospace, LLC..________ 480-218-0918 Accutech Machine Inc_______ 801-975-1117

Kim@A2Zmanufacturing.com

The Buyers Guide Reaches Over 14,000 Decision Makers In The West Coast Region WA, OR, & CA! What you get: FREE PR and 6 Categories with your company name and Phone # Only $260 For A Full Year! Call Now For More Information!

480-773-3239 Kim@A2ZManufacturing.com

Precision Die & Stamping_____ 480-967-2038 Aeroform, Inc. __________ 360-403-1919 SUPPLY CHAIN MANAGEMENT

Milco Waterjet___________ 714-373-0098

Cascade Systems Technology___ 503-640-5733 Precision Aerospace, LLC_____602-352-8658

SLITTING

TESTING

Rickard Engineering _______866-845-8838

United Performance Metals___ _888-282-3292

Non-Destructive Testing

SW Waterjet & Laser________480-306-7748 A2Z MANUFACTURING WEST COAST

• 45 • JUNE- JULY 21

Index of Advertisers 3D-Plastics...27,39

Flex-Pro...28,38,40

Phoenix Heat Treat...41

ABS Metallurgical...45,47

Foresight Finishing...44

Portland Precision...42

Accutech Machine, inc...43

Frontier Group...39

Precious Metals Plating...17,39

Ace Wire & Spring Form...44

Gentech...40

Precision Aerospace, LLC...41

Acieta...33,41

GMN...14,34

Precision Die & Stamping...14,39

Advanced Precision Anodizing...41

Gosiger in WA...34,35

Aeroform, Inc...42

Graphel...40

Precision Enterprises...41

Aero Tech Manufacturing...40

Group Manufacturing...40

Albina Co, Inc...7,39

Grovtec...39,48

Allied Tool and Die...44

HS&S Machine Tool...36

Amada...13

Hercules Sealing Products...1,20,21

American Precision Industries...41

Hexagon Metrology...35

Arizona Finishing...41

Horizon Carbide...36

Asko Group...42

Hurco...19

ATF Aerospace, LLC...32, 43

Industrial Metal Supply Co....28,37

Barton...24,37

Industrial Precision Grinding...44

BMSC...10,26,32

IRH Carriers and Rigging...38

Bralco...34

KD Capital...36

Spinetti Machinery...33

Byington Steel Treating...41

Kloeckner Metals-Temtco...29,33

Spring Works Utah...40

Bystronic...33

Landmark Solutions...34

StandardAero...18,43

Cascade Engineering Tech...42

Laube Titanium Mill Prod....37

Star Metal Fluids...33

Cleveland Electric Labs...41

Layke Inc...43

Starrett...35

CLS Fabrication Inc...40

Leadtek...44

Steel Services Grinding...41

Coast Aluminum...6,33

Lucy’s Machine...32,43

Sterling Saw Blades...29,

Coastal Metals...22,33

LV Swiss...43

Strom Manufacturing...39

Coating Technologies...40,47

Mario Pinto...34

Sun Grinding...39

Controlled Thermal Tech...43

MET-TEK Inc...40

Curtis Wright...41

Methods Machine Tools Inc...5,33

Superior Grinding...1,20,21,40

Cycle Time Solutions...34

Metro Metals Northwest, Inc...42

Datron...35

Micropulse West...41

DCM Tech...34

Microtronics...6

Die-Tech Precision Machine...40

Midaco Corporation...34

Doosan...9

Milco...44

EDM Network...32

Mountain View Machining...41

EDM Performance..32,33

MP Systems...35

Edge Technologies...23,33

MRI , Machinery Resources...35

Ellison Technologies...9,32

Newport Tool...44

EPSI...42

Noron Precision Machine...10

Evans Precision...45

North-South Machinery...25,32

Von Ruden Manufacturing, Inc...33

Expand Machinery...35

North Western Machinery...35

Weiser Engineering...41

Fahey Machinery...,13,33,34, 35,37

NW Machine Tool Expo...5

Western Sintering...17,39

Faustson...40

Pacific Swiss...39

Wrico Stamping...44

FLATLINE FAB...11,30,43

Performance Machine Tools...8,36

Zeiss Metrology...32

A2Z MANUFACTURING WEST COAST •

46 • JUNE- JULY 21

Real Axis Machining...43 RENISHAW...12,32 Ron Grob...27,41 Rosco Precision Machinery...19,32 Royal products...24,33 Saw Services of WA...10,33 Selway Machine Tool Co...32,33,34 SigmaNest...32 SMH Inc LLC...30,39 Specialty Steel...40

Superior Metal Shapes...16,36 Sustaining Edge...35 Swift Tool...3,26,31,32,34,36 TCI Precision Metals...1, 22,23 Teton...42 ThinBit...2,32 TVT Die Casting...16,39 United Performance Metals...36 US Shop Tools...15,36 Valley Financial Services...35

A2Z MANUFACTURING WEST COAST •

47 • JUNE- JULY 21

A2Z MANUFACTURING WEST COAST •

48 • JUNE- JULY 21

grovtecmachining.com 503-557-4689

9100D

9001:2015