/ Mercedes Benz / VW / Audi / Land Rover and most other 5 stud hubs
Heavy duty high quality universal adjustable wheel flange hub puller designed to extract a huge range of drive flanges and hubs of various sizes.
Models: Suits a huge range of makes and models! Has been tested on the below models though. BENZ: W140 / W163 / W124 / W220
E36 / E46 / E90
Touareg
Ball Joint Mini
Joint Press This kit can be used for the following: Removal and installation of front ball joints on Ford AU - BA & Ford Explorer, Nissan D40 Navara & Pathfinder Front Bottom ball joints. Commodore V-Series Independent rear suspension bushes.
& Parthfinder
Large ball joint extractor suitable for Land Rover, BMW, VW and some Mercs utilizing Alloy lower control arms.
WAS $375 Universal master ball joint separator kit. Suits a huge range of vehicles due to a clever design that allows you to adjust the height on the centre pivot point up or down to suit various control arm set ups. Includes sizes: 24mm / 27mm / 31mm / 36mm
A
Professional workshop quality separator for splitting ball joints, track-rod ends and anti-roll bar mountings especially in small space conditions like on Audi, VW, BMW,
Universal 2 Piece Shock Absorbe Ram Spreader Socket Kit
Suitable for the spring strut and ball joint mounting (separating the spring strut from the wheel bearing housing).
Set of two 1/2" drive sockets: 5mm x 7mm
5.5mm x 8mm
Universal Professional Brake Piston Wind Back Calliper Tool
A universal tool for pressing the pistons back into the brake caliper on most vehicles with 4 piston callipers.
Suspension Split Hub knuckle Spreader
A compact hub clamp spreader tool designed to allow the suspension split in the hub to be held open to make the removal and fitting of the suspension strut easier.
APPLICATION: 5.0 - 12mm
Models: VW / Audi / Skoda / Seat Ford / BMW / Citroen / Renault
Universal Strut Nut Tool Set 39pc
Set for removing shock absorber caps. The kit contains all the various sizes of “Thru” sockets and various sizes of bits to allow shocker removal.
Models: VW Golf / Passat / Polo / Audi 80
Honda / Nissan / Ford / Rover / Opel / Renault Citroen / Toyota / Chrysler / Volvo, BMW Mercedes and many more
AIR SHOCK ABSORBER LEAK TEST KIT
Tool kit to complete a leak test of the Air
1 2 Drive Pentagon Socket
This set contains Pentagon Sockets & Bits suitable for the adjustment and Installation of Bendix or Girling Brakes.
Drive: 1/2" Drive
Contents:
10mm Pentagon bit 56mm for Girling brake system
10mm Female Pentagon 38mm for Girling brake system
12.5mm 38mm for Bendix brakes
14mm Female type 38mm for Pentagon brakes on rear brake
Opel Astra G / Zafira / Smart
19mm Female type 38mm for Bendix brakes Citroen / Peugeot Renault
Mercedes Benz Universal Suspension Spring Compressor Kit
This spring compressor kit is designed for instances where the tool needs to go up the inside of the spring and uses two plates, one at the top and one at the bottom to compress the spring.
AVAILABLE FOR RENTAL
Suitable for removing and positioning springs within multi-link, independent arm suspension systems at the front and rear of the vehicle. Supplied with two pairs of interchangeable caps using a three-hook safety system.
Air Powered Calliper Wind Back Tool
Mercedes Benz 17mm Flower Wheel Bolt Socket
Latest air powered wind back tool kit with adapters to suit a huge range of vehicles - 23 PCS Includes the 3 pin adapter that suits many of the Euro vehicles including VW, Audi, BMW, Renault and more. If you have not used an air powered brake calliper wind back kit yet, you will wish you had of bought one a long time ago!
Digital Brake Fluid Teste
This new and much improved brake fluid tester will accurately display water moisture content in the brake fluid. The unit comes with a backlit screen and inbuilt flashlight for when in dimly lit areas. Includes a buzzer alarm function and auto shut off after 5 minutes. 1% or less is a good condition, no need to replace the fluid.
1% - 2.5% means the performance is reduced but still usable.
3% or above indicates a serious decrease of performance and needs replacing.
Suits Fluids: DOT3, DOT4, DOT5.1
This wheel lug socket is designed for Mercedes Benz vehicles that came fitted with the unique convex patterned wheel nuts.
Size: 17mm, 1/2" Drive (88mm Length)
Models: 204 / 207 / 211 / 212 / 216 / 217 / 221 / 172 / 164 / 166
OEM Bolt Number: 0009905407
Brake Caliper Socket Set 10pc
3.0L
Manual operation suitable for most vehicle brake systems.
1 x standard European adapter with a 90 degree fitting for narrow spaces. Capacity 3000cc tank with improved pressure gauge for easy viewing.
Built-in a pressure release valve on the filler cap. Includes 2 special industrial hoses with control valve & connectors. 1000cc waste fluid receiver DM12-6231-7A
1000cc waste fluid receiver for no mess brake fluid changes. Can be Used with Manual Brake Fluid Bleeder DM12-6231
Brake Bleeder 12v 0.6 to 3 Bar Pressure
Vehicle and component manufacturers are increasingly incorporating high torque and specialised fasteners with a greater number of bolt head profiles, this trend is very prevalent with brake callipers and can make even a brake pad change impossible without the correct tool. This 10 piece boxed set covers most commonly encountered fasteners used on VW, AUDI, PORSCHE, MERCEDES BENZ, BMW, SEAT and other European makes, and includes 7 point, 10 point, hex and multi spline.
This compact, mains powered brake bleeding machine is perfect for smaller workshops. It features an adjustable delivery pressure from 0.6 to 3 bar and a delivery volume of up to 1.2 litres per minute. The delivery hose is 3.5 meters long with a NITTO connection and comes with three adaptors including the most common European and Asian with one recovery waste bottle also supplied. The machine features an automatic shut off in the event of loss of pressure and is perfect for bleeding difficult clutch systems also.
A comprehensive high quality unit at an affordable price. 15 piece alloy adaptor kit is also available.
8pc Multispline Impact socket Set
Set of 8 Multispline type sockets commonly found on Volkswagen group vehicles, and many other European applications. Great for the calliper mounting and drive shaft bolts.
M12 / M14 / M16 / M18
All sizes come in short (44mm) & Long (77mm) 44mm / 77mm 1/2"
Brake Fluid Syringe 200ml
Useful tool for getting fluid out of the master cylinder and reservoir.
200ml capacity.
R50 R52
Removal and Installation Kit 203 204 209 211 220
Used for the removal and installation of the front lower caster arm bushes on the 203 / 204 / 211 / 220 models. Bush replacement can be done ON CAR without having to remove the arm allowing the job to be performed in about 30 minutes - saving time, saving money, and paying for itself in one use!
Models: 203 / 204 / 209 / 211 / 220
AVAILABLE FOR RENTAL AVAILABLE FOR RENT
Hydraulic hand pump.
3/8" Adapter
800kg Output
AVAILABLE FOR RENT
Mercedes Benz Front Caster Arm and Control Arm Bush Removal and Installation Master Tool Kit
Mercedes Benz bush hydraulic removal and installation tool kit. This is a tool kit specially designed to remove and install caster arm and control arm bushes on car without having to remove the arms. This master tool kit covers a huge range of Mercedes Benz vehicles!
NOTE: Please use in conjunction with a hydraulic pump, either DM11-B1129 or DM11-A3036
Models: 203 / 204 / 209 / 211 / 212 / 220 / 221
F Series BMW Front Suspension Arm Bush Removal and Installation Tool Kit
This kit is used to remove and install the metallic bushing in the traction strut / control arm on the car without disassembling the arm. It's design allows for precise installation of the bush in the correct position without the necessity of alignment of the bush after installation.
Hydraulic driven, this kit requires a DM11-B1129 (hand pump) or a DM11-A3036 (air pump) for use.
Models: F01 / F02 / F07 / F10 F11 / F12 / F13 / F18
Ford Differential Bush Removal
This Tool is specially designed to remove and install the three differential bushes in the rear sub-frame ON CAR without removing the sub-frame. Differential assembly needs to be only lowered about 10cm to gain access to the three bushes in the rear.
Great time saver!
AVAILABLE FOR RENTAL
Toyota 4WD Hilux Front Lower Suspension Arm R I
These Kit is for the removal and installation of the front lower control arm bushes on the following models: Models: Toyota Hiace, Vigo
VW Front Crossmember Silent Bloc Bush Removal and Installation Tool Kit On Car Manual
Audi VW Front Control Arm Bush Removal and Installation Tool AVAILABLE FOR
Designed for removal and installation of the control arm to subframe bush at the front of the front suspension arm.
Models: Audi: A3 / TT
VW: Golf / Jetta / Passat / Tiguan
OEM Bush Number: 1K0
BMW F80 F82 F87 Front Differential Bushing Removal Tool
This tool is designed for use on the FRONT bushing of the rear differential.
APPLICATION: F80 M3/ F82 M4 F87 M2 BMW F80 (2015-2019) M3 BMW F82 (2015-2020) M4 BMW F87 (2016-2020) M2 OEM: 83302445327
FOR
For removal and installation of the front crossmember large central bush. (double type silentbloc bush)
The pulling device allows the quick and safe removal and installation of subframe double-type bushes to be performed in situ on the vehicle. Loosening or removing the assembly carrier from the vehicle as well as follow-up wheel alignments is not necessary.
AVAILABLE FOR RENTAL $439 DM11-B1544 WAS $552
(We do have a Hydrualic version of this kit which is DM11-A1544) This kit has now been superseded to DM11-C1544, However we have been told this kit (DM11-B1544) fits the older steel crossmember frame bushes and the updated DM11-C1544 will not. AVAILABLE FOR RENTAL
BMW Differential Front Mounting Bush Removal and Installation Tool Kit
Removal and installation tool designed for the differential mounting bushes in the BMW rear subframe.
Designed for on-car maintenance of the differential mounting bushes at the front of the subframe, without the need to disassemble the suspension or for complete removal of the subframe. Clean the area surrounding the bush and lubricate the threaded rod before each use.
Models: BMW F01 / F02 / F06 / F07 / F10 / F11 / F13 OEM Bush number: 33316792873 /
Designed for the removal and installation of the large bush in the middle of the cross member located towards the front area of the fire wall. VW, Audi Front Alloy Crossmember SlientBloc Hydrobush Remover / Installer
