OZWIDE TOOLS 2022 Automotive Tool Flyer

We're Serious About Automotive Tooling!

1300 80 60 65 ozwidetools.com.au

01st June to 30th November 2022

$635 .00

EXC GST

DM03-IH320

NEW!

$165.00

Induction Heater 1000W

EXC GST

DM10-MANO-M

NEW!

Automotive Digital Pressure Manometer

This digital pressure manometer features a positive port, and a negative port.

It was chosen specifically to measure the pressure gradient across D.P.F.s by teeing into the pressure sensing tubes, this enables us to measure the actual pressure and compare this simultaneously to the pressure reported in live data to determine if the differential pressure sensor is reading correctly or not and move on with our diagnosis.

This 1000 Watt electromagnetic induction heater is specifically designed for automotive use.

It will heat a seized bolt or sensor in seconds to allow for easy removal.

It can widely be used on passenger vehicles, boats, farm equipment, tanks or any type of machinery.

The tool kit comes with three pre-formed coils and a free-form inductor to use on irregular shaped components such as seized injectors.

Spare inductors are available.

The range of this meter is + or - 30psi / 206.8 Kpa in 11 selectable common units and is also suitable for MAP, BPS, EXHAUST BACK PRESSURE, VACUUM, and PRESSURE ACTUATOR system diagnostics.

NEW!

Voltage: 220 Output Current: 180A Output Voltage: 40V Output Power: 1000W

Superseal Auto Connector & Tool Kit This grab kit comprises 1,2,3,4,5 and 6 pole male and female housings with male and female terminals and wire seals to suit.

$635.00

$179.00

EXC GST

DM13-KA17

A high quality ratchet type crimp tool is included with quick change jaws to suit all of the included terminals.

EXC GST

DM9-605AU

Also see DM13-BA26 JPT terminal crimp and release tool kit.

NEW!

Brake Bleeder 0.6–3 Bar This compact, mains powered brake bleeding machine is perfect for smaller workshops.

It features an adjustable delivery pressure from 0.6 to 3 bar and a delivery volume of up to 1.2 litres per minute.

The delivery hose is 3.5 meters long with a NITTO connection and comes with three adaptors including the most common European and Asian with one recovery waste bottle also supplied.

The machine features an automatic shut off in the event of loss of pressure and is perfect for bleeding difficult clutch systems also.

A comprehensive high quality unit at an affordable price.

$79.00

EXC GST

DM14-1600D

30 Piece Banana Plug Automotive Test Lead Kit Fantastic 30pc Test lead kit to suit all automotive wiring test applications..

CATIII / Test Lead Lengths 100cm

1

INTRODUCTION TO THE ATS PRODUCTS The ATS range of products are designed and manufactured in the USA for automotive professionals.The range of tools include, 8 channel oscilloscopes, engine pressure analysis and exhaust gas analysers to vibration analysers and drivability tools.

This range of tools have been designed right from the start with the repair process in mind.

The tools are not the product of a vehicle manufacturer's engineering team, but rather the requirements and desire of a highly committed company to find and apply a better, faster way. ATS have achieved that goal.

These tools are not for everyone, but if you have the mindset and desire to be the absolute best in your field, these tools will be for you.

iEA™ Intelligent Engine Analyzer ELITE8 Kit /W AU Tablet

This tool kit is designed with the powerful 8-channel oscilloscope as the hub which then works seamlessly with their entire diagnostic range including the iEA kit, E-Scan Elite Intelligent Power Scan, The iVA Intelligent Vibration Analyser and the iGA5 Elite intelligent 5 gas analyser, which are all available separately, as well as all the standard scope accessories.

ATS has the solution. You provide the motivation.

This comprehensive kit comprises of:

$12,595.00

EXC GST

- ESO3100-E-Scope, 8 channel with accessory lead and clamp box - EMI1030-iEA intelligent engine analyser - DM20-MS7PRO-128 Microsoft Surface Pro 7+ 128Gb, 8Gig Ram (with Windows 10) - DM20-MSPEN Microsoft Surface Pen, coded to suit ATS software - DM20-UAG-SURFACECASE- UAG Surface Cover with rear strap

EMI3000-AU

$4,695.00

EXC GST

IVA3000

iVA Intelligent Vibration Analyzer

iEA™ Intelligent Engine Analyzer (Requires Scope) The ATS EMI1030 Intelligent Engine Analyser is available as a standalone kit and when paired with either the 4 or 8 channel ATS Oscilloscope it can turn your laptop into a powerful engine diagnostic machine to pinpoint the locations of a misfire or mechanical problems, such as incorrect valve timing or compression loss.

The kit includes exhaust pressure transducers, minus 30in.hg, 300psi and 500psi, A Spark tester with RF filter, exhaust pulse amplifier, cylinder compression adaptors, vacuum and tail pipe hoses, adaptors and cables.

Note: This tool kit needs to be paired with the ATS 4 or 8 channel oscilloscope.

The ATS iVA is a stand alone kit used to locate the source of vibrations transmitted into the cabin on passenger vehicles or heavy vehicles.

As with all things with modern vehicles with sophisticated dynamics, it can be a very time consuming process to pinpoint the source of a vibration. In the past it was not uncommon to have to swap components from one vehicle to another to try to locate the fault, this could (and did) amount to days of lost time. This tool is designed to eliminate the guesswork with its four sensors and extremely powerful software and logical process. It can turn a challenging task into a profitable and satisfying outcome.

Note: This kit must be used in conjunction with a Laptop or tablet

FINANCE AVAILABLE

eScope Elite 4 Channel Oscilloscope $4,450.00 EMI1030

EXC GST

$4,595.00

EXC GST

ESL3100

A 16 bit, 4 channel or the big brother 8 channel dual time-based oscilloscopes featuring CKP Misfire Software.

Ultra-Sharp Wave-forms, DTC Stop Scope feature, Dual Time Base, TTL Output, Automatic Test Lead Connection Detection, Automatic voltage attenuator, drives four pressure transducers at once with full pressure / vacuum conversions.

Includes a large lead & accessory kit for both the 4 and 8 channel.

Please visit www.ozwidetools.com.au for a more in-depth description.

2

All prices are Excluding GST

eScope Elite 8 Channel Oscilloscope

$6,675.00

ESO3100

EXC GST

Bullseye Leak Detector with IR Standard Kit Au Version

Medical Grade Automotive Articulated Borescope $2,199

$4,699.00

EXC GST

LDT3010-AU

.00 EXC GST

BOR2000

This is a medical grade borescope that delivers crystal clear images and video to your computer, tablet or phone.

The 6mm diameter probe has 150 degree one handed articulation with image flip and 360 degree rotation. A 4x zoom is featured. It has a three foot probe cable, it also comes with an Android adaptor kit and a screw on mirror and light. It also comes with a lens cleaning kit and case.

This Borescope is in a league of it’s own!

The ATS BULLSEYE LEAK DETECTOR utilises carbon dioxide, CO2 as the medium for testing enclosed systems such as air conditioning and fuel evap emission control systems. It can also be used to check cylinder integrity or even cooling systems prior to refilling which is a great way to locate potential issues in complex cooling systems with components often buried under manifolds and covers and it uses cheap CO2 to do so.

This unit can be used with SodaStream bottles which once you have the kit becomes a very cost effective way to test.

Check out our website for more details

$3,195.45

EXC GST

PTR3000

Pressure Pro Transducer Kit

This kit will work with any oscilloscope to display up to three pressure transducer outputs simultaneously.

$2,995.00

EXC GST

ESN3000

AVAILABLE FOr FOr AVAILABLE

RENTAL

eScan Elite, Engine Power And Drivability Diagnostics

Kit Includes: Pressure Pro, 300 PSI Transducer, -30 HG Vacuum Transducer, EMissFire Exhaust Sensor (-20 H2O), 2 Pressure Transducer Cables, Phono Jack to Phono Jack Cable, 3 Pressure Pro to Scope BNC Cables, 3 BNC to Banana Plug Cables, 14mm Stainless Steel Compression Tester Adapter, 18mm Stainless Steel Compression Tester Adapter, Exhaust Tailpipe Hose, Quick Connect Coupler - Small, 1/4" Hose Adapter, 3/8" Hose Adapter, Custom Carry Case (not shown).

· Does your scan tool have a list of special diagnostic PIDS? · Can your scan tool calculate and display catalyst efficiency? · Can your scan tool tell you if the air/fuel ratio is correct: if the MAF is working properly? · Does your scan tool display fuel trim charts at different engine speeds? · Does your scan tool calculate volumetric efficiency? · Can your scan tool translate Mode 6 data to simple English?

A recent winner of the USA magazine Motor Top 20 award eSCAN is like a diagnostic compass that points you in the right diagnostic direction to fix drivability issues fast! – Check our website for more details

Please check out the

Please check out the "Automotive Test Solutions" Youtube channel. It has a large library of amazing videos you can watch of these tools being used first hand.

YouTube channel.

Some of the diagnostic techniques will blow your mind.

It is definitely worth a watch!

"Automotive Test Solutions"

FINANCE AVAILABLE

Finance on all products is available through our easy financing service.

Payments terms of 24 months to 60 months are available.

All prices are Excluding GST

3

Automotive Diagnostic

Smoke Machine

$645.00

EXC GST

DM-SMOKE-206

New affordable automotive smoke machine for testing air intakes, fuel systems, cooling systems, cabin water leaks plus many more uses! Powered via the vehicle's 12v battery, this unit quickly and accurately can locate the physical fault. This machine has its own air pump, it does not rely on shop air, great for mobile Techs.

AVAILABLE FOr FOr AVAILABLE

RENTAL

EXC GST

Universal Ultrasonic Fuel Injector Cleaner

$65.00

At last there is an inexpensive fuel injector testing machine available that can enable any small workshop or independent operator to clean and test their own fuel injectors to determine quickly and accurately the serviceability of a set of injectors without recourse to a specialist. This machine has a built-in ultrasonic cleaner, with a programmable timer. The tester has four back-lit calibration tubes to observe the spray pattern and a fully programmable test cycle to replicate any failure mode, e.g. Idle, Acceleration, Full load, etc. The rail pressure is fully adjustable and can be read off directly from the rail-mounted gauge.

This really is a time saving and money making machine

$625.00

NEW!

EXC GST

Fuel System Analyzer

EXC GST

DM-ULTRASON-5L

Ultrasonic Bath Fluid 5L Ultrasonic Bath Fluid to Suit DM9-CT150

$52.00

EXC GST

DM-SMOKE-AIRBAG

Universal air bag inflator used in conjunction with a smoke machine to allow a certain area for testing to be blocked off thus allowing smoke / air pressure to build up quicker which in turn pinpoints leaks.

Modern fuel delivery systems are complex, simply relying on a pressure gauge to diagnose these systems is no longer adequate, you need to confirm both delivery pressure and volume to ensure fuel supply under all load conditions.

$1,089.00

This tool enables testing fuel delivery in your bay utilising a built-in flow meter. It can test both return and returnless systems. It also incorporates a built-in vacuum gauge to allow testing of early mechanical regulators and a separate pressure gauge to test exhaust back pressure and low pressure fuel systems.

The tool is supplied with a comprehensive range of connectors for fuel, exhaust and vacuum testing.

$459.00

EXC GST

DM13-055C

Fuel Injection Pressure Test Kit A comprehensive kit for testing the fuel pressure flow on petrol engines and low pressure sides of diesel engines also. Comes with two gauges. A larger scale to test readings of up to 145 psi and a smaller gauge for accurate readings below 15 psi.

4

Smoke Machine

Universal Inflatable Adapter

DM10-FSA1

DM-SMOKEFLUID-500

A much better alternative to baby oil and has nowhere near the stink that baby oil gives off! 1/2L Bottle.

Great diagnostic machine for those that do not want to pay thousands.

DM9-CT150

EXC GST

Smoke Fluid 500ML

It also features a flow meter and pressure gauge, the air pressure is adjustable to suit multiple test situations, example... higher pressure for exhaust and turbo systems, lower pressure for crankcase breather testing.

$675.00

$27.00

All prices are Excluding GST

NEW!

EXC GST

DM03-SMOKE-550 AVAILABLE FOr FOr AVAILABLE

RENTAL

Heavy Duty High Flow Smoke Machine

This is truly a portable 12-volt DC powered unit, incorporating its own internal air pump with the ability to also connect to shop air OR a CO2 source for safely testing EVAP systems.

It incorporates a low-pressure gauge and flow metre for testing EVAP systems etc in the 5 to 8 KPa range.

A high-pressure gauge and flow metre for testing induction systems, exhaust systems, cooling systems etc in the 0.8 to 1.2 Bar range. And a HD range from 2 to 8 Bar to test high pressure systems such as air suspension or combustion chambers.

It gives you essentially three pressure ranges, fully adjustable for pressure and flow.

The machine can be used with or without smoke depending on what you are testing and comes with a large range of accessories to enable connection to the vehicle.

This is a truly versatile, well-built machine and enables leak detection not just in engine systems but is also great for tracking down wind and water leaks in doors, sunroofs, light assemblies and many more applications.

The smoke leak detector is an essential tool for drivability diagnosis in today’s modern workshop and this machine really packs a punch with its versatility and range of functions.

If you have been holding out from purchasing a smoke machine or waiting for the right one to cover all your needs or you simply want to update your old machine, this is the machine for you!

$199.00

$363.00

EXC GST

NEW!

EXC GST

DM-SMARTHOOK

DM9-FSC100

Multi-function Circuit Detector & Probe Intelligent Analyzer $25.00

EXC GST

DM-MEMORY-OBD2

Fuel System and Induction System Cleaner Automotive non-dismantle fuel system cleaner injector clean set for petrol cars. When the vehicle starts to be unstable, idle, and difficult to start, at the same time, fuel consumption increases, this may be due to carbon deposition- residual deposit happening in the fuel system, which could affect routine work.

Our cleaner kit will help you out with fast and straightforward cleaning.

NEW!

Memory Saver Via OBD2 Avoid information loss when the vehicle's battery has to be disconnected when carrying out repairs. Excellent tool for when changing the vehicles battery Maintain the vehicles computer memory including dashboard information, digital clock, acoustics, electric memory seats, ABS braking system, electric rear-view mirrors and many more.

Specifications: Cable length: 80CM Colour: black and red cord

Time marches on and the new HOOK has all the advantages of the earlier tool plus a huge array of new features. Firstly it has what they call Intelligent Test Mode, this means the ability to identify and automatically display either the voltage, the resistance or the positive or negative poles of the component under test.

It has a multimeter mode which displays all the usual parameters, voltage, current, resistance, diode and frequency. It can also deliver a 0 volt to 5 volt signal to the probe tip as desired, in addition to the ground or battery reference, which has always been a feature of this type of tool.

It has a repeater function for testing 4 and 5 pin relays with a graphical indication of activity, some may find this useful.

It can generate a timed pulse signal in four modes to activate a fuel injector. I can see some applications for this feature.

It can also generate four signal types to activate other components, lights, horn,pumps etc.

The tool also has what it describes as OSCILLOSCOPE MODE, which is a bit of a stretch, however it will display some simple signal events including injector pulse, square wave trigger patterns etc, which could be quite useful. Given the size limitations of the tool it has a remarkable number of features, This tool will prove to be a valuable instrument for those who are willing to learn its operation and who are not afraid to try something new.

GSY 120 Amp Battery Maintainer & Charger

The GYS range of battery chargers and programming maintainers are state of the art and have now been officially approved by BMW for use during diagnosing and reprogramming procedures.

This unit is capable of charging all battery types including lithium and stop/start in either 8 steps (lead acid) or 9 steps(LFP) automatically. It provides the clean output and current capacity to maintain the battery even under the most demanding situations.

This is critical during reprogramming where a failure to maintain battery voltage can result in corrupted data or damage to control units.

This is particularly important for prestige makes during long procedures. This unit has many safety features including reverse polarity and short circuit protection and has been designed with future requirements in mind.

Built in France and engineered to last and the list of features is extensive.

$250.00

EXC GST

DM10-T200

Updated System Ignition Analyzer This ignition analyser can be used to quickly pin-point ignition misfires, worn coils, damaged spark plugs, high tension leads, and other starting issues.

Requires no time-consuming set up, simply grab and point!

Will analyse all spark ignition systems including Coil on Plug, and other general set ups such as DIS Displays spark burn time (0-10ms) Maximum KV (0-50 / -50,000v) Engine speed for individual cylinders Measures RPM (200 – 19,999 Rpm) Capture Button Very handy addition to your diagnostic collection.

$335

$199.00

EXC GST

DM10-2051

GST

DM10-X300P

The reset tool has been primarily designed to simplify everyday service functions such as service light reset, park brake, pad change service, abs bleeding, steering angle reset, battery reset, T.P.S reset, throttle body re-learn, dpf regen, injector coding and much more. It is also an OBD2 scan tool and features an extensive d.t.c library with descriptions for 30 Manufacturers. The major benefit of this tool is in the reset functions and is seen as a compliment to your full function scan tool which can often be tied up with it major function which is diagnostics. The DM10-X300P is very simple to use, and be easily updated via the Internet.

EXC GST

GYSFLASH-120A

.00 EXC

Digital Vehicle OBD2 Re-Set Tool

$1,879.00

NEW! Super

Ultrasonic Leak Detector An invaluable tool used to pinpoint leak paths in sunroofs, windscreens, doors,boot lid, panels, light assemblies, etc.

Anywhere you suspect has a wind or water leak. Also used to trace high pressure air leaks from air suspension systems, vacuum leaks, e.g. brake boosters or servo motors.

The kit contains a transmitter which may be located inside the vehicle, and a receiver used to detect the leak. A set of headphones is supplied for use in noisy environments and two sensor extensions to reach into crevices.

All prices are Excluding GST

5

Wire Tracing 6 42volts – Short & Open Finder

80 Amp Fuse/ Current Tester

A great piece of diagnostic equipment for testing circuits via the fuses with adapters for fuse sizes Micro, Mini & Maxi.

Automotive Wire Tracing 6 – 42 volts – Short and Open Finder

Large digital display, peak hold functions and one touch zero function.

1.2m cable, measure range up to 80A / 48 Volts (10 second max test time)

Great piece of equipment to locate short and open circuits in DC circuits from 6 to 42 Volts.

Designed to identify and trace wires or cables without damaging the insulation.

Power Source: 2 x 9v batteries included.

$125

.00

NEW!

$109.00

EXC GST

DM10-6165

EXC GST

DM10-6084

Insulation And Resistance Tester

NEW!

This metre is designed to test the integrity of the insulation on components such as piezo fuel injectors, solenoid injectors, coils and motor windings etc, where a DMM’s low voltage ohmmeter is of no use. This metre uses high voltage, in the ranges of 100v 250v 500v and 1000v to locate insulation breakdown on components that operate at high voltage. It is designed for techs who specialise in drivability diagnostics and E.V. techs.

The metre also incorporates an auto ranging AC/DC voltmeter and Ohmmeter.

It is rated CAT IV 600V and CAT3 1000V.

$213.00

EXC GST

DM10-VS628

NEW!

Air Bag Test Tool

$25.00

This tool is used as an airbag or seat belt pre- tensioner load substitute to assist in the diagnosis of SRS / Airbag system faults.

EXC GST

DM-AIRB-TEST

For example, a possible open circuit in the drivers air bag could be due to a wiring harness fault, a rotary coupler, a clock spring fault, the air bag itself, or possibly the control unit.

This tool is designed for professional use only.

AVAILABLE FOr FOr AVAILABLE

RENTAL

4 Channel Automotive $955.00 EXCGST Oscilloscope Tablet T-BMINI-1104 The T-Book Mini is a digital oscilloscope at an affordable price.

The T-Book Boasts a 8” LCD tablet touch screen, so no having to set up your laptop!

This is a dedicated automotive scope featuring fast one touch set up for a range of commonly used tests, including ignition, fuel injection, starting, charging,12 and 24 volts, ford smart charging, networks CAN, lin flexray k-line along with custom tests you wish to program.

This tablet will quickly become your go to scope, it is that good!

Carry Bag

$49.00

EXC GST

T-BMINI-BAG

for T-Book Mini Specifically designed for the T-Book Oscilloscope. This bag comfortably holds your scope along with multiple leads and clamps. Protect your investment!

Diagnostic OBD2 Breakout Box The DM-BREAKOUT-BOX is designed to connect to the OBD-11, 16 pin diagnostic port fitted to passenger and light commercial vehicles from 1996 to present.

$119.00

Each port has an led which illuminates to indicate whether power and ground are present.

EXC GST

DM-BREAKOUT-BOX

An in-built volt meter will also indicate the level of supply voltage available from the vehicle which is critical for diagnostics and programming. The DM-BREAKOUT-BOX is also fitted with an additional 16 pin female connector to allow for direct connection of your scan tool.

6

All prices are Excluding GST

A must have for the workshop!

3m BNC Test Leads

$29.00

EXC GST

DM16-HT30A

It's a special line for assisting automobile measurement instruments to test various types of signals.

4mm connectors are coded in two colors, black and red.

Test lead of a male BNC connector to (2) 4mm connectors.

Generous lead length of 3 meters!

Relay Tester Quickly test suspect relays with this automotive 4 and 5 pin relay tester that powers via the 12v battery. If testing a 4 pin relay, set the selector to 4 Pin and hit test.

The Tester will open and close the relay 10 times testing for time to contacts and consistency of the relay.

The testing unit will either display Green for pass or Red for fail.

$79.00

Universal Wire Terminal Extension & Test Set

Coil Over Plug Wand W/BNC Connector

This large multi-function wire terminal set allows you to greatly extend the capabilities of your diagnostic tooling by allowing you to tap into the wires and connectors needed for testing.

The Coil-On Plug and signal probe wand catches the ignition waveform of a vehicle’s petrol engine and through this ignition waveform it opens a door into what is happening in the engine’s combustion chambers and ignition systems.

$310.00

EXC GST

EXC GST

DM11-B2031

Comes with a long 2m cable to BNC connector which fits right into any oscilloscope including the one shown above the T-BMINI-1104.

DM-RELAYTEST

$179.00

EXC GST

DM16-HT25COP

NEW!

30pc Electronic

Terminal Release Set 30pc Terminal Connector Release Tool Set Universal range for virtually all vehicles. For damage-free unlocking of terminals and connectors, e.g. for ABS, climate sensors, radios, PDC, trailer coupling modules, and much more.

Faults due to corrosion or connection defects can be repaired quickly.

$209.00

EXC GST

DM10-364A

Brake Bleeder 12v 5L Reservoir NEW!

$925.00

EXC GST

DM9-618AU

Digital Pulsating Brake Bleeder 12v 5L Reservoir. This machine is designed to bleed up to four wheels at one time. It has a 5-litre reservoir for the new fluid and four bleed bottles to collect the old fluid.

Delivery pressure is adjustable from 0.6 bar(9psi) to 3.5 bar (50 psi). The unit has a digital pressure display, Pressure gauge, digital time display, pressure adjustment, pulse adjustment & time adjustment.

Large stainless steel 5L capacity reservoir feeding new brake fluid to the master cylinder. Also comes with 15pc Metal master cylinder adapter set. The DM9-618AU is a fast, reliable, professional workshop brake bleeder!

OPUS IVS PicoScope 4 Channel 4425A Standard Kit

$3,989.00

EXC GST

PICO-KP405

The PicoScope is an extremely powerful automotive diagnostic piece of equipment for today's modern workshop.

The kit comes with the hardware module and an extensive range of test leads and connectors. All you need is to use the unit in conjunction with your laptop and installed PicoScope software.

Please check our website for all individual parts included in the Pico Standard Kit. Regular software updates are free for the life of the machine.

There are over 150 guided tests and growing, plus 6,500 sample waveforms.

Access to the PicoScope waveform library. This is an Opus IVS branded PicoScope, there is nothing different about it. Warranty, Access to waveform library and free software updates are all the same.

All prices are Excluding GST

7

$17 .00

Adapter to suit Euro Nitto Couplings

EXC GST

DM-EUROADAPT

Adapter to suit Euro air fittings commonly found on European Brake Fluid Flushing Machines such as ATE / FTE

$95.00

Ratchet Brake Calliper Press Tool

EXC GST

DM13-02H2

$249.00

Boiling Point Brake Fluid / Cooling Fluid Tester

Brake Fluid Tester Electronic NEW!

EXC GST

DM10-5074

NEW!

DM10-100BOIL

Works on various single, dual & quad piston callipers Centrally distributes force to prevent misalignment of pistons.

Tool has two plate sizes: 115mm x 60mm & 177mm x 60mm

$81.00

EXC GST

This brake fluid boiling point detector is an instrument for detecting the boiling point of brake fluid in DOT3 / DOT4 / DOT5 / DOT5.1 and can be quickly and accurately measure this boiling point to tell you if the barke fluid needs replacing.

This new and much improved brake fluid tester will accurately display water moisture content in the brake fluid. The unit comes with a backlit screen and inbuilt flashlight for when in dimly lit areas. Includes a buzzer alarm function and auto shut off after 5 minutes.

1% or less is a good condition, no need to replace the fluid. 5% - 2.5% means the performance is reduced but still usable. 3% or above indicates a serious decrease of performance and needs replacing.

The boil method is the best and most accurate way of testing brake fluid.

Suits Fluids: DOT3, DOT4, DOT5.1

Manual Brake Fluid Bleeder Pump - 3.0L Reservoir

$125.00

EXC GST

DM13-Y002

Pressurizes the master brake cylinder while keeping it full with fresh new brake fluid from the 3.0L tank when bleeding the brake system.

Comes with a European style round cap adapter that suits a huge range, and a 1.0L overflow reservoir.

A larger adapter kit is available separately - DM13-WH505CA Fantastic option for the back yard mechanic.

Thin Wall Spark Plug Socket - 14mm

$36.00

EXC GST

DM30-4730

Thin wall 14mm 12 point spark plug socket to suit various models. Models: BMW / Mercedes Benz AMG / Ford / Toyota / Peugeot / Citroen / And many more OEM: 83300495560 / 121220

$38.00

$290.00

Stainless Steel Engineering Scissors These engineering scissors will certainly impress.

Stainless Steel blade scissors with a sharp, toothed blade, non-slip grips, and a safety lock.

Extremely powerful scissors. 8" (204mm) All prices are Excluding GST

EXC GST

DM13-WH505CA EXC GST

DM30-3422A

8

Brake Master Cylinder Pressure Bleeding Adapter Kit (12 Piece)

10pc Brake Calliper Socket Set

Brake fluid reservoir cap adapter 12pc set for pressurised bleeding of the brake system.

Suitable for use in conjunction with DM13-Y002 and most pressure brake bleeders.

Application: Domestic, European, American & Asian vehicles.

$109.00

EXC GST

DM10-BRAKE-SET

Vehicle and component manufacturers are increasingly incorporating high torque and specialised fasteners with a greater number of bolt head profiles, this trend is very prevalent with brake callipers and can make even a brake pad change impossible without the correct tool.

This 10 piece boxed set covers most commonly encountered fasteners used on VW, AUDI, PORSCHE, MERCEDES BENZ, BMW, SEAT and other European makes, and includes 7 point, 10 point, hex and multi spline.

NEW!

$12.00

EXC GST

Universal Wheel $265 .00 EXC GST Lock Nut Remover DM13-7252C

Replacement Wheel Nut Mouldable Adapters

DM13-7252-07

New 14pc UNIVERSAL Wheel Lock Nut Remover Set An easy to use kit, allowing the removal of virtually any wheel nut that currently exists on the market including those with spinning collars without damaging the wheel thanks to a protective steel cap. Simply hammer in the moldable replacement blades into the wheel lock nut until it takes the shape of the specific pattern.

Connect the assembly tool and unscrew using a breaker bar.

Replacement wheel lock nut remover adapters.

To suit kit DM13-7252C

AVAILABLE FOr FOr AVAILABLE

RENTAL

$155.00

$280.00

EXC GST

DM13-0021

$159.00

EXC GST

DM11-B2288

$280.00

EXC GST

DM11-C2288

AVAILABLE FOr FOr AVAILABLE

20 Piece BMW Pattern type wheel security socket set (Early Spline Style) Length: 30mm Drive: 17mm Hex WARNING: Not to be used with Impact Gun. OEM: 361300

$180.00

BMW Wheel Security Lock Nut Socket Set Pattern Type (20 Piece) 20 Piece BMW Pattern type wheel security socket set.

Length: 42mm Drive: 17mm Hex Models: F20 / F21 / F30 / F31 / F32 / F33 / F36 / F10 / F11 / F12 / F13 / F01 / F02 / F04 | OEM: 362010

$425.00

EXC GST

DM11-D2288

EXC GST

DM11-G2288

23 Piece early style VW splined style wheel security socket set WARNING: Not to be used with Impact Gun. Socket Numbers: #51/6PT / #52/7PT / #53/8PT / #54/9PT / #55/10PT / #56/11PT / #57/18PT / #58/13PT / #59/14PT / #60/15PT / #61/16P / #62/17PT / ABC0/10PT / ABC1/11PT / ABC2/13PT / ABC3/14PT / ABC4/15PT / ABC5/16PT / ABC6/17PT / ABC7/19PT / ABC8/20PT / ABC9/21PTAlso includes: 1pcs 1/2" dr 85mmL H17 socket OEM: T40004 / T10101A

$245.00

EXC GST

NEW!

AVAILABLE FOr FOr AVAILABLE

Audi Pattern Type Wheel Security Socket Set (20 Piece)

20 Piece VW pattern flower type wheel security socket set with spinning collar. Please Note: Audi and VW are different kits, for Audi pattern style please use DM11-F2288 Models: UP! / Polo / Beetle / Golf / Jetta / Eos / Scirocco / Passat / Sharan / Touran / Tiguan OEM: T10313

20 Piece Audi pattern flower type wheel security socket set. Please Note: Audi and VW are different kits, for VW pattern style please use DM11-E2288.

OEM: T40073

$230.00

Mercedes Benz Wheel Security Lock Nut Socket Set - (30 Piece)

20 Piece Porsche Pattern type wheel security socket set. Socket Numbers: ABC-50 ABC-51 / ABC-52 ABC-53 / ABC-54 / ABC-55 ABC-56 / ABC-5 / ABC-58 ABC-59 / ABC-60 / ABC-61 ABC-62 / ABC-63 / ABC-64 ABC-65 / ABC-66 / ABC-67 ABC-68 / ABC-69 OEM: T10190

$2,200

.00 EXC

DM-WSCKIT

GST

NEW!

30 Piece Mercedes Benz Pattern flower type wheel security socket set.

Socket Numbers: #301 / #302 / #303 / #304 #305 / #306 / #307 / #308 #309 / #310 / #311 #312 #313 / #314 / #315 #316 #317 / #318 / #319 #320 #321 / #322 / #323 #324 #325 / #326 / #327 / #328 #329 / #330

Combo of all Wheel Sets

EXC GST

DM13-03Z1

BMW/MINI Locking Wheel Bolt Removal Tool Kit

AVAILABLE FOr FOr AVAILABLE

RENTAL

Porsche Wheel Security Lock Nut Socket Set Pattern Type (20 Piece)

RENTAL

VW Wheel Security Lock Nut Socket Set Pattern Type (20 Piece)

DM13-0923

RENTAL

AVAILABLE FOr FOr AVAILABLE

RENTAL

VW Wheel Security Lock Nut Socket Set Multi Spline Type (23 Piece)

EXC GST

DM11-F2288

AVAILABLE FOr FOr AVAILABLE

RENTAL

BMW Wheel Security Lock Nut Socket Set Early Multi Spline Type (20 Piece)

$280.00

EXC GST

DM11-E2288

AVAILABLE FOr FOr AVAILABLE

RENTAL

Replacement blades available DM13-7252-07

Universal Wheel Nut Extractor Set This simple-to-use kit is capable of removing virtually all locknuts on the market to date, with no damage to the wheel due to the protective steel shroud. It's so effective it has become the tool of choice for the AA and RAC. The tool does not rely on strength to work effectively, making it an ideal solution for anybody looking to remove locknuts without the key.

This kit allows you to remove each wheel within several minutes without the BMW or Mini wheel key tool and with AVAILABLE FOr FOr AVAILABLE RENTAL no damage to the rim!

The tool successfully bites into the head of the bolt, and using the slide hammer pull out the head of the bolt. You can then hit in the other spline part of the tool and remove the wheel bolt completely.

PLEASE NOTE: Using this tool kit will destroy the genuine bolts and you will need to replace them with a normal set of wheel bolts.

A Huge Time Saver!!

This combo kit consists of the following kits: DM13-03Z1 / DM13-7252C / DM13-0923 / DM13-0021 / DM11-B2288 / DM11-C2288 / DM11-E2288 / DM11-F2288 / DM11-D2288 / DM11-G2288

All prices are Excluding GST

9

1/4" Male Nipple 420MN

$3.00

EXC GST

AIR-R420MN

1/4" Male Coupler R420MC

$12.00

EXC GST

AIR-R420MC

1/4" Female Coupler R420FC

$11.00

$30.00

EXC GST

DM-GKA110

$30.00

$30.00

EXC GST

DM-GKA195

DM-GKA179

120 Piece Circlip Set

178 Piece Metric Flange Bolts

195 Pice Metric Self Locking Nuts

120 Piece circlip set 14 different sizes that suit 6mm through to 25mm shafts. External and Internal

178 PCE Metric Flange Bolts and Nuts. The kit contains 10 different sizes: Diameter: 5mm - 8mm High Tensile: 8.8 Length: 16mm - 50mm Zinc passivated coating

195 PCE Metric Self Locking Nuts - Nylon insert. The Nylon insert at the end of the nut assists in the nut never coming loose. The kit contains 12 different sizes: M4 to M14 UNF / UNC Zinc yellow passivated coating.

EXC GST

AIR-R420FC

$30.00

EXC GST

$30.00

DM-GKA236

1/4" Drive Female Nipple 420FN

$3.50

EXC GST

$11.50

380 Piece Metric O-Ring Set

236 Piece Metric Bolts and Nut Kit. The kit contains 14 different sizes: Diameter: 4 - 10mm | High Tensile: 8.8 Length: 16 - 50mm | Zinc passivated coating

380 Piece Metric O-Ring Set Quality rubber precision moulded O-Rings which suits automotive, industrial, plumbing and home handyman use. The kit contains 15 different sizes: Metric sizes: 5mm - 25mm Internal Diameter

EXC GST

AIR-R430HC

EXC GST

$30.00

1/4" Male Swivel Joint

$34

EXC GST

AIR-CPM-20

$27.00

DM-GKA170

470 Piece Fine Thread Screw 470 PCE Machine Screw and Nut Set. The kit contains 16 different sizes: Diameter: 3mm - 6mm | Length: 10mm 25mm | Phillips pan head screws.

EXC GST

Lo

$30.00

DM-GKA470

.00

EXC GST

DM-GKA380

236 Piece Metric Bolt High Tensile

AIR-R420FN

3/8" Female Coupling with Barb Adapter

EXC GST

170 Piece Terminal Set 12 Types, red, blue and yellow, Male & Female Connectors and Eyelets, 170 piece

EXC GST

AIR-CSW-02

NEW! Universal Swivel Joint Block Style Allows good range of movement Can be used as an adapter when space is tight, especially on brake master cylinder adapters 360 swivel action 1/4” Male/Female

10

All prices are Excluding GST

$30.00

EXC GST

DM-GKA740

$30.00

EXC GST

DM-GKA795

$30.00

EXC GST

DM-GKA933

740 Piece Flat Washer Kit

795 Piece Split Pin Kit

933 Piece Spring Washer Kit

740 Piece Flat Washer Kit. The kit contains: Metric 6mm - 20mm ID Imperial 3/16" - 3/4" ID Zinc plated steel

The kit contains 10 sizes: 1.6mm - 4mm Diameter: 7/64 Length: 22mm - 50mm Zinc plated.

933 PCE Spring Washer Kit. The kit contains 12 different sizes: Metric: 6 - 12mm Imperial: 5/32" - 5/8" Zinc plated steel.

$345.00

Diesel Injector Puller Adapter Master Kit 21 Piece

EXC GST

DM21-1905

Universal tool kit for disassembling the injector and for preparing the removal of the injector.

Suits a huge range of vehicles Including Mercedes Benz, BMW, VW, Audi, VAG, Volvo, Ford, and Mazda plus many more.

PLEASE NOTE: This kit does not come with a slide hammer, however we have 3 different sized slide hammers to choose from.

DM-SHAMMER / DM21-1905B / DM21-1905A

AVAILABLE FOr FOr AVAILABLE

RENTAL

$65.00

EXC GST

DM-SHAMMER

AVAILABLE FOr FOr AVAILABLE

RENTAL

$89.00

Thread Size: M16 x 1.5mm (Includes adapter to step up to M18 x 1.5mm) Slide Length: 153mm (Total Length including Adapter: 245mm) Hammer Weight: 1.35kg Total Weight: 1.8kg

DM21-1905B

EXC GST

DM21-1905A

Slide Hammer (1.6kg)

Slide Hammer (4.5kg)

Thread Size: M18 x 1.5mm Slide Length: 340mm Total Length: 510mm Hammer Weight: 1.6kg Total Weight: 2.6kg

Thread Size: M18 x 1.5mm Length: 715mm Hammer Weight: 4.5kg Total Weight: 7.6kg RENTAL

Universal Injector Seat Reaming and Cleaning Master Tool Kit This kit is designed to clean the carbon deposits from common rail injector and nozzle bores. It is supplied with 3 seat restoration reamers , rotary brushes and flex drive. It also comes with a removal tool to extract stuck nozzle gaskets.

$319.00

DM13-97-15 AVAILABLE FOr FOr AVAILABLE

RENTAL

Universal Diesel Injector Seat Cutter and Reamer Set - 19 Pcs Set of 19 cutters for re-cutting injector seats. This set helps to avoid blow back due to poorly seated injectors. The set ensures that the injector seat is bored to the exact dimension when replacing or reconditioning the diesel injectors.

Later model vehicles are housing more narrow injectors these days and earlier kits may not have small enough reamers to fit down the injector ports. This kit is the latest on the market containing various cutters for nearly all diesel vehicles.

$49.00 NEW!

EXC GST

DM13-C09Z

This wrench set is designed to service the diesel filter / sensor on MAZDA SKYACTIVE-D2.2. Engines: 2.2L Diesel Engines SH-VPTS / SH-VPTR Models: CX-5 / CX-8 / Mazda 6 & ATENZA / Mazda 3 & AXELA

EXC GST

DM11-A1994-COMBO

NEW!

Universal Diesel Injector Remover Kit

EXC GST

MAZDA Diesel Filter & Sensor Wrench 2pc Set

AVAILABLE FOr FOr AVAILABLE

RENTAL

$1,350 .00

AVAILABLE FOr FOr AVAILABLE

RENTAL

AVAILABLE FOr FOr AVAILABLE

Pre-Order Now

EXC GST

DM13-2432

Slide Hammer (1.35kg)

$170.00

EXC GST

$290.00

$79.00

EXC GST

DM10-001 AVAILABLE FOr FOr AVAILABLE

RENTAL

This universal hydraulic powered injector puller kit is designed to remove the most stuck injectors from most diesel vehicles.

Injector Types: M18X1.5 BOSCH, M27X1 SIEMENS, M25X1 SIEMENS, M14X1.5 DELPHI, M20X1 DENSO, M16X1.0M DENSO, M16X1.5 DENSO ,M25X0.5 DENSO, M25X0.75 DENSO This combo kit comes with with the base kit DM11-A1994. The optional hydraulic cylinder DM11-A1994-HC, hand pump DM11-B1129 and extra adapter claw and screw cap set DM11-B2323 If you find yourself removing a lot of diesel injectors lately this kit will pay for itself in no time!

3pc Injector

NEW!

Line Socket Set 14, 17, 19mm

Diesel Injector line socket 3 piece socket set. Universal and will fit most injector lines. Suitable for most BMW / Mercedes Benz / Audi, VW. 3pc kit comes with 14mm, 17mm & 19mm 1/2dr All prices are Excluding GST

11

$250.00

EXC GST

DM11-A2248

Universal Glow Plug Drilling and Removal Tool M8 / M10 Universal Broken Glow Plug Drilling and Removal Tool-M8/ M10. For extracting broken glow plugs. This can be a long and painful job without recourse to this tool.

Glow Plug Electrode Remover

$280.00

Glow Plug Puller Set W / Slide Hammer

$145.00

EXC GST

DM13-C069

This kit is for when the glow plug has been undone but you cannot pull it out of the head - carbon has built up on the electrode and prevents removal. The A part of the tool simply allows the glow plug to be extracted with the slide hammer.

The B part of the kit is designed if the glow plug is broken off below the screw thread.

EXC GST

DM13-C280

This tool designed for when the glow plug undoes and is removed - but the electrode has broken off and is sitting inside the head chamber - they have very small drill bits in the kit that allow you to drill a small 2.5mm hole in the broken electrode - then you can tap a small M3 thread into the broken electrode and cut a small M3 thread - then you can use the extractor to remove the broken electrode.

$359.00

EXC GST

DM13-740B

$149.00

Glow Plug Extraction Kit

EXC GST

DM13-4526

Universal Injector Shaft Cleaning Set A great kit for cleaning the carbon deposits from the inner walls and seats common on diesel vehicles. An important job when replacing injectors to avoid leaks.

This kit is designed to extract the electrode of a broken glow plug by drilling and tapping the remnant electrode tip and fitting an extraction rod to the tapped hole which can then be pulled out.

This kit is supplied with 4 guides; M10X1, M10X1.25, M9X1 andM8x1 which covers the common sized glow plugs.

4 extra long guided drills 2.5mm and 3.2mm with suitable guided taps,M3x0.5 and M4x0.7 to suit the most common electrode tips.

$179.00

EXC GST

DM7-508SCR

NEW!

Broken Glow Plug Electrode Extraction Kit Broken glow plug combo kit comes with the following kits: DM11-A2248 DM13-C069 DM13-C280 DM13-740B

$925.00

12

All prices are Excluding GST

EXC GST

DM-BROKGLOW-KIT

NEW!

CRD Common Rail Diesel Fuel Rail Pressure Tester and Signal Simulator This tool connects to the crd rail pressure sensor and harness via moulded plugs, no fiddling with back probes. It automatically detects which system, Bosch, Delphi or Denso. Crank the engine. The tool then directly displays the signal as Mpa, psi or bar, this will immediately tell you whether the fuel system develops enough pressure to activate the injectors and start the engine. In the event that the engine fails to start, possibly due to a fault in the pressure sensor, it is then possible to substitute a pressure value to the PCM to help determine whether you have an actual pressure fault or a perceived fault due to a faulty pressure sensor. All this data can be gathered in minutes by making two connections.

If you service CRD vehicles you need this tool.

BMW Petrol B38 / B48 / B58 Engine Timing Tool Kit

BMW Sac Clutch Mandrel 6pc Set $125.00

EXC GST

DM13-388F

$425.00

AVAILABLE FOr FOr AVAILABLE

DM11-D1704

RENTAL

For centering of the clutch disc on flywheels while installing self-adjusting clutches (SAC) on a range of BMW vehicles.

Designed to align the clutch disc before installing or re-installing a self-adjusting clutch (SAC). Can also be used to align new and already pretensioned SAC clutches.

$535.00 NEW!

DM11-B6206

This tool kit is designed for locking the crankshaft and camshafts in the correct timing position while servicing these BMW engines.

Engines: BMW B38 / B48 engines / B58 BMW OEM No. reference no.: 2 358 122 / 2 288 380 / 2 365 488

$325.00

EXC GST AVAILABLE FOr FOr AVAILABLE

RENTAL

NEW!

EXC GST

$260.00

EXC GST

DM11-A1749

AVAILABLE FOr FOr AVAILABLE

RENTAL

NEW!

EXC GST

DM11-G1421

AVAILABLE FOr FOr AVAILABLE

RENTAL

BMW Tailshaft & Diff Input Shaft Oil Seal Removal & Installation Tool Kit W/ Adapter

BMW Diff Bush Removal / Installation Tool Kit E81-E93 & M3

BMW (B37/B47/B57) 3.0L/2.0L/1.5L Diesel Engine Timing Tool Kit

A large portion of BMW vehicles require special tooling just to remove the tailshaft. This kit has all the required tooling for removing the tailshaft plus the tooling to remove the pinion nut and install the diff pinion seal. The kit comes with a special adapter that can be used in conjunction with your torque wrench or a 1/2dr breaker bar.

BMW Diff Bush Removal / Installation Tool Kit This tool kit is specifically designed to extract and install the three Differential mounting bushes. This bush tool has cone pieces included that narrow at one end which squashes the bush smaller for fitment.

The B47 & B57 motors have replaced the N47 & N57 diesel engines.

Models: E81 / E82 / E83 / E84 / E85 / E86 / E87 / E88 / E90 / E93 / X3 / Z4 / M3V / Series 1 and Series 3

Application: BMW E90 / E91 / E92 / E70 / F01 Up To F25

NEW!

$569.00

AVAILABLE FOr FOr AVAILABLE

RENTAL

EXC GST

BMW Master Front and Rear Crankshaft Oil Seal Removal & Installation Kit

Models: 4 and 6 cylinder BMW Engines: N40 / N42 / N45 / N45T / N46 / N46T / N52 / N52N / N53 / N54 / N55

NEW!

$55.00

EXC GST

DM11-B1301

A/C Stretch Belt Installer Air Conditioner Compressor belt installer tool for the BMW N62 V8. Also suit the Land Rover V8, and the R50 / R52 MINI Diesel. Vital for the stretch belt installation - a painful task without the correct tool.

Models: BMW / MINI / Land Rover Engines: N62 / W17 | OEM: 641040

Contains all the necessary tooling to set correct engine timing.

NEW! BMW (N51/N52

DM11-D1438

For removal and installation of the crankshaft seals. Correct tooling is important to avoid the possibility of the seal being damaged during installation, resulting in leakage. This does the front and rear seal.

These timing chains are located at the rear of the engine at the gearbox side and are a twin camshaft chain driven engine.

$929.00

EXC GST

DM11-B6155

N53/N54/N54T/N55/B58)

Exhaust Camshaft Removal & installation Tool Master Kit

Master kit for removing and installing the exhaust camshaft in a large range of the N series BMW engines. Depending on the repair, this kit will need to be used in conjunction with the correlating timing kit that suits that engine code.

Engines Suites: N51 / N52 / N53 / N54 / N54T / N55 / B58

$89.00

EXC GST

NEW!

DM11-E1500

BMW Oil Filter Adapter For oil pressure metering on the oil filter housing.

APPLICATION: B37 / B38 / B47 / B48 / N47 / N57 / DV6 (9HZ) / W16 / 1.6HDI

EXC GST

DM11-B1500

BMW B37 B38 / B47 B48 / N47 N57 Oil Filter Adapter

$315.00

BMW N20 / N26 / N46 / N55 Oil Filter Pressure Test Kit AVAILABLE FOr FOr AVAILABLE

RENTAL

Used to test oil pressure on the N20, N26, N46 and N55 engines.

Engines: N20 / N26 / N46 / N55 OEM: 119 250 All prices are Excluding GST 119250

13

$45.00

EXC GST

NEW!

DM13-516A

$55

Mercedes Benz Long M270 Belt Wrench T55

EXC GST

DM11-A1759

Specially designed to work on Mercedes Benz drive belt tensioner idler.

Due to the position of the idler this can be a very time consuming and painful job without this tool.

Long handle T55 wrench

$215.00

.00

EXC GST

Mercedes Benz Transmission Fluid Filling Set - 9 Speed - 725.0 Required tooling to allow for fluid service on the Mercedes Benz 9 Speed transmissions. The set contains a tool to remove the drain plug, an insert to allow draining of the fluid, and a threaded adapter to attach a filling tool into the drain (Filling tool and adapter set DM11-D2235). Models: Mercedes Benz - 166 / 172 / 205 / 213 / 222 / 231 / 253 / 292 / 906 Transmission: 9 G-Tronic (725.0)

$36.00

EXC GST

DM13-697D-17

17mm Diesel Injector Socket Used in the disassembly / assembly of fuel injection pipes or other pipe fittings.

Size: 17mm Length: 119mm Drive: 1/2dr Models: BMW / Mercedes Benz / Opel and many others

DM11-A1266

$439.00

$54.00

EXC GST

DM11-B1209

DM13-8286

722.9 Transmission Filling Adapter Tool

AVAILABLE FOr FOr AVAILABLE

RENTAL

Universal Adjustable Crankshaft Pulley Holding Tool

This tool is designed to fill the automatic transmission from under the vehicle.

Transmission: Mercedes Benz 722.9

Holds vibration damper when loosening and tightening center bolt.

One side of the U shaped head is on a sprung pivot meaning the head can spring in and out to suit any pulley size diameter or shape.

$419.00

AVAILABLE FOr FOr AVAILABLE

RENTAL

EXC GST

DM11-C1535 AVAILABLE FOr FOr AVAILABLE

RENTAL

Mercedes Benz Timing Chain Installation Tool Kit - M651 Used to draw through the timing chain during replacement and service on the Mercedes Benz M651 Diesel engine.

Helps prevent skipping of the chain during installation. If skipping does occur engine timing will need to be reset.

NEW!

$48.00

EXC GST

DM11-A1022-L

NEW!

Mercedes Benz Vito Sprinter Clutch Fan Holding Tool Mercedes Benz Vito / Sprinter Clutch Fan Holding Tool

Engines: M651

Mercedes Benz / BMW Free Wheeling Hub Adapter Free wheeling hub adapter for use on vehicles with failed ISM/ESP unit (resulting in a locked transmission).

Free wheeling adapter use on Simply raise thehub vehicle and for remove vehicles withwheel, failedinstall ISM/ESP either rear the unit adapter (resulting in a locked transmission). using the supplied screws and torque Simply raise the vehicle and remove to 80Nm. Remount the wheel to the either rear wheel, install can the adapter adapter and the vehicle now be using the supplied screws torque easily rolled to around yourand workshop to 80Nm. Remounttruck the wheel or to a transport withoutto the adapter and the vehicle count now be difficulty. easily rolled to around your workshop Models: Mercedes Benz: 164 / 251 or to a transport truck without and more BMW: F01 / F02 / F07 / difficulty.

F10 / F11 / F12 / F13 / F25 / F30 / Models: Benz: 164 / 251 F31 / F32Mercedes / F33 / F34 and more BMW: F01 / F02 / F07 / F10 / F11 / F12 / F13 / F25 / F30 / Excluding GST F31 / All F32prices / F33are / F34 14

EXC GST

NEW!

Mercedes $48.00 EXC Benz 722.9 GST Transmission DM11-A6056 Oil Level $132.00

EXC GST

DM11-A1898 AVAILABLE FOr FOr AVAILABLE

RENTAL

NEW!

Benz M133 / M270 M274 Guide Rail Pin Puller

Designed to remove the timing chain guide rail mounting pins.

This dipstick is designed to check the fluid level in the Mercedes 722.9 transmission. It is designed as a quick check of the transmission fluid level via the breather tube. The manufacturer’s procedures should always be adhered to to ensure the specified level is correct. This tool will quickly determine the presence and condition of the fluid and allow you to decide if further action is required.

Mercedes OEM no. ref: 722589002100

AVAILABLE FOr FOr AVAILABLE

RENTAL

$329.00

AVAILABLE FOr FOr AVAILABLE

RENTAL

EXC GST

$159.00

DM11-A1514

$179.00

EXC GST

DM11-B2276

Audi / VW Engine Timing Tool 1.6l / 2.0l Tdi An engine locking / timing tool for the 2013 onward EA288 generation VAG blue motion engines fitted with a common rail diesel system.

Models: Audi: A3 / A4 / A5 / A6 / Q5 Volkswagen: Golf / Tiguan / Passat / Eos / Jetta & Many others

DM11-A1512

Audi/VW Rear Main Crankshaft Oil Seal Installation Tool 1.2L 1.4L Petrol & 1.6L / 1.9L / 2.0L Diesel This tool is necessary for the installation of the rear main oil seal with intergrated sender wheel.

Models: Golf / Touran / Caddy / A3 / Transporter / Amarok / Polo / Jetta and many more Engines: Diesel: 1.6L / 1.9L / 2.0L TDi (CAY) Petrol: 1.4L TSi (CAVD / CAXA) 1.2L (CBZA)

Engines: 1.6L TDI / 2.0L TDI

EXC GST

DM21-1401

Universal Audi / VW Adjustable Camshaft Gear Pulley Puller Universal adjustable gear wheel puller.

Fantastic for camshaft sprockets and other various gear wheels. The plate has 8 different slots for different offsets with adjustable legs to fit different diameter and design gears.

A great universal tool.

VW / Audi PTFE Rear Main Oil Seal Installing Tool

OEM: T10134 / T10017

$82 .00

EXC GST

VAG PTFE Crankshaft Rear Seal Installer This tool is used for assembling PTEF crankshaft seal, flywheel end and useful for proper installation of rear main seal.

Engines: VW / Audi 2.0T, 1.8T, 1.8T Gen3, 1.8T Gen3, 2.0T Gen3 GLI, GLI VW OEM reference number T10122A / T10122B / T10122C AVAILABLE FOr FOr AVAILABLE

RENTAL

$345.00

AUDI / VW 4 PIECE COIL PACK PULLER SET

EXC GST

DM11-A1951

4 piece kit for removal of ignition coils on VW and Audi vehicles.

Coil pack removal tools save skinned knuckles and prevent coil damage caused by makeshift removal methods.

Different shaped puller heads fit various VW/ Audi coil configurations.

Engines: 4 / 6 / 8 / 12 Cylinder

$72.00

EXC GST

DM11-A2207

NO IMAGE AVAILABLE FOr FOr AVAILABLE

RENTAL

$615.00

EXC GST

DM13-8956

7 Speed DSG Dry Clutch Master Installer Remover Special design to install and remove the dual clutch assembly.

AUDI / VW / Ford Seat / Skoda Engine Timing Tool Kit 1.9l / 2.0l Diesel Suits a massive range of VW / Audi Models!

Diesel: 1.6L / 1.9L / 2.0L TDi

This master kit includes the Mechatronic leaver tool, long straight edge for sitting over the bell housing for taking measurements. And the heavy spacer tool for clutch service on the 7 speed dual dry clutch transmissions in VW / Audi vehicles 2011 Onwards Specially designed to remove load from plungers of the mechatronic unit when you insert the tool between clutch lever and gear housing.

Models: Golf / Polo / Tiguan / Jetta / Passat / Eos / Golf R / A1 / A3 Transmission: 0AM 7 Speed Dry Double Clutch DSG

AVAILABLE FOr FOr AVAILABLE

RENTAL

$145.00

EXC GST

DM11-A1760

AUDI / VW Crankshaft Pulley Holding Tool 1.0l / 1.2l / 1.4l Used to counter-hold the Crankshaft pulley when loosening and tightening the centre bolt.

Engines: 1.0L / 1.2L / 1.4L OEM: T10475 All prices are Excluding GST

15

$290.00

EXC GST

DM11-A1872 AVAILABLE FOr FOr AVAILABLE

$189.00

$949.00

EXC GST

DM21-1730A

AVAILABLE FOr FOr AVAILABLE

RENTAL EXC GST AVAILABLE FOr FOr AVAILABLE

DM11-A1576

RENTAL

Audi / VW Injector Removal and Installation Tool Kit - FSI / TFSI Petrol

VW / AUDI / Universal Adjustable Camshaft Pulley Holding Tool

RENTAL

Audi / Porsche / VW Diesel Cam Cradle Fitting Tool 4cyl, V6 & V8

Designed for the removal and installation of the high pressure petrol injectors used on direct injection VAG engines. Includes tooling for the injector seal installation also.

This specially designed fitment tool allows you to acurately set up the inlet and exhaust camshafts on the upper cylinder head frame, meshing both gears at the rear of the camshaft.

Engines: VW / Audi FSI petrol engines Will also fit Ford Focus RS 2.3L Petrol Injectors. | OEM: T10133

Used to hold the camshaft gear when loosening and tightening the centre bolt. Adjustable jaw opening and multiple adapter fittings to allow for use on a wide variety of vehicles although it is designed for VW / Audi vehicles this tool has universal applications.

Models: VW/ Audi / Skoda / Seat /Mercedes Benz / BMW / Ford / Mitsubishi / Honda / Nissan / Volvo / Toyota and many more. | OEM: T10172

$34.00

EXC GST

DM11-C2090

AVAILABLE FOr FOr AVAILABLE

AUDI / VW

RENTAL

NEW!

$139.00

$31.00

EXC GST

DM30-6640

VAG Fuel Tank Lid Remover T40283

VAG Fuel Tank Lid Remover Specially designed to remove extremely tight fuel sender tank lids on petrol and diesel vehicles.

Models: VW , Audi , Skoda , Seat | OEM: VW T40283

EXC GST

NEW!

DM11-A1131

Models: Benz / BMW / Audi / VW / Opel / Hyundai / Kia / Porsche Size: 74mm / Points: 14

$49

DM13-405Z

$72.00

Models:- AUDI- B9 A4 FWD / AUDI A8 2003> AUDI A6 2005> AUTOMATIC 09E 4WD OEM : T40123A

NEW! Camshaft

EXC GST

Sprocket Holding Piece

DM11-A1872-01

NEW!

Application: For counterholding camshaft adjuster in conjunction with special tool T10172 (DM11-A1872)

VAG Electrical Connector and Terminal Removal Tool This kit comprises 2 pin extraction tools and a connector disengagement tool. The disengagement tool engages with the fragile security latch to safely lift the tab and release the connector.

This tool may save many broken connectors and thumb nails. The 2 pin extraction tools suit the most common connectors to depress the pin latching ears and release the pin, causing minimal damage. Along with VW / Audi, these tools are also applicable to many other Euro vehicle manufacturers. These connectors are found on many components from Fuel injectors, EGR valves, Throttle bodies, control solenoids, door latches etc. often with limited access.

16

All prices are Excluding GST

DM11-A6028

Removal and installation of 7-speed dual clutch gearbox (S-tronic) This tool is designed to clamp onto the clutch input shaft and extract the assembly safely.

Oil Filter Cup Wrench 74mm / 14 Point

EXC GST

EXC GST

AUDI Dual Clutch Lifting Device

VW / BMW / Mercedes Benz

.00

$219

.00

Models: VW / Audi vehicles OEM: T10554

3pc Transmission Filling Adapter Set

$69.00

EXC GST

DM-6078-AD2

Transmission fluid filling adapter set for VAG DSG & CVT / Mercedes Benz 722.9 Transmissions.

Models: Audi / Skoda / Seat / VW / Mercedes Benz

Ribe Head Bolt

Socket M10S (140mm Long) Square Tooth Allows easy access to the recessed cylinder head bolts on VW / Audi and now Ford 1.0L Ecoboost engines Size: M10S (Square tooth, 6 sides - Ribe) Length: 140mm Drive: 1/2"

$53.00

EXC GST

DM11-A1386

AUDI Engine

Oil Level Dipstick Tool - FSI / TFSI Electronic oil level indicators are terrific, provided they work and if you have the time to wait, and assuming you filled the sump yourself.

The quickest, simplest and most reassuring indicator of engine oil level is a calibrated dipstick. End of story!

Models: A4 / S4 / A5 / S5 / A6 and many more Engines: 1.6L / 2.0L TFSI / 3.2L FSI / 4.2l FSI /3.0L Supercharged

$209.00

$310.00

EXC GST

Jaguar NEW! Land Rover Peugeot

Engine timing tool and Injector pump locking kit for the Ford / Mazda Duratorq engines. This is a complete kit that will allow engine timing, high pressure pump removal (while keeping the chain in position) and installation of the front cover seal.

Engine Timing Tool Kit

2.7 / 3.0 V6 Diesel Timing Tool Kit

RENTAL

This kit now includes flywheel setting tools for both Automatic transmissions and Manual transmissions which are different / Oil pump alignment plate / Both styles of Hook & Threaded screw for H/P pump sprocket removal

Kit contains camshaft alignment / timing pins and flywheel locking tools. The Ford Territory 2.7L V6 Diesel Crankshaft Locking Pin. And high pressure fuel pump sprocket tooling when servicing the belt located at the rear of the engine.

Models: Jaguar: S Type (XJ) | Land Rover: Discovery TDV6 / Range Rover / Range Rover Sport TDV6 | Peugeot: 407 / 607 Citroen: C6 / C5 | Ford: Territory | Engines: 3.0 / 2.7 Diesel V6 TDV6

$38.00

Master Ford Mazda 2.2L - 3.2L Engine and H/P Pump Kit

DM13-8371-MASTER

DM-TDV6

AVAILABLE FOr FOr AVAILABLE

EXC GST

AVAILABLE FOr FOr AVAILABLE

RENTAL

Models: Ranger / BT50 / Transit 2.2 L Duratorq-TDCi & 3.2 L Duratorq-TDCI

$155.00

EXC GST

3 & 6 Spoke Harmonic Balancer Puller for GM / Chrysler / Dodge Jeep

2.2L TDCi Diesel Fuel Filter Wrench Special designed to remove and install the fuel filter on Ford Transit 2.2L TDCi engine. | Models: Ford Transit Engines: 2.2L TDCi OEM: 207 1140 001 00

$409.00 AVAILABLE FOr FOr AVAILABLE

RENTAL

DM13-8359

Ford Engine Timing Tool Kit - 1.0l Ecoboost Petrol Contains tools vital for setting and locking the engine and for setting the position of the variable cam timing units.

Models: Ford B-Max / C-Max / EcoSport / Fiesta / Focus / Grand C-Max Engines: 1.0 EcoBoost / SCTi EcoBoost (SFJA / SFJB / M1DA / M2DA / M1JC / M1JE / P4JA / P4JB) NOTE: This tool kit must be used in conjunction with DM13-9261 due to the high torque settings on the crankshaft pulley.

This Balancer Remover is suitable for variety of engines using 3 and 6 spoke pulleys. Used on the GM Alloytec V6 and the GEN 4 / LS2 / LS3 V8.

$829

EXC GST

$430.00

.00 EXC

AVAILABLE FOr FOr AVAILABLE

RENTAL

DM13-3144

NEW!

DM13-0711

EXC GST

GST

DM13-9261

Ford Torque Multiplier Tool Installer / Remover For Harmonic Balancer Bolts Due to extremely tight torque specifications on the Ford harmonic balancer bolts, This tool is used to install and remove the harmonic balancer bolt during timing belt replacement.

The torque multiplier tool is designed to attach on the engine's left drive shaft bracket to guarantee a secure fit while torque is applied to the harmonic balancer bolt.

The torque multiplier has a gear ratio of 1: 5.

The tool is needed when working on the following Ford engines: Engines: 1.0 EcoBoost, 1.0 Duratec,1.1 Duratec, 2.0 Duratorq-TDCi, 2.0 EcoBlue Diesel

NEW!

EXC GST

AVAILABLE FOr FOr AVAILABLE

RENTAL

DM10-1623B

Toyota Rear Axle Bush ON CAR Removal This tool kit is designed to remove and install the Rear-axle suspension bush ON CAR the Toyota MPV, Corolla, Camry and many more.

These bushes are extremely difficult to replace due to being part of the Sub-Frame and are a common bush that fails on Toyota vehicles.

Models: CAMRY & COROLLA - NZE12 / NZE 14 / ZRE12 / ZRE14 | TARAGO & PREVIA – ACR30 ESTIMA – ACR30 / ACR40 / MRC30 / MCR40 ALPHARD – ANH10 / ANH15 / MN10 / MNH15 ALTIS & AVENSIS – ACM20 VOXY – AZR60 / AZR65 YARIS / ISIS / ALLEX / IPSUM / NOAH / PREVIA / VOLTZ All prices are Excluding GST

17

$79.00

$449.00

EXC GST

DM30-4858

VW / Audi Transmission 5th and 6th Gear Puller

Transmission Dipstick Tool Used to measure oil level in vehicles without an installed dipstick. Used on vehicles equipped with a NAGI, 42RLE, CVT Transmission and the 62TE Transaxle.

Models: Chrysler: 300C (05->) / Sebring (07->) | Dodge: Charger (05->) / Nitro (07->) / Avenger (07->) / Challenger (08->) | Jeep: Grand Cherokee (05->) / Liberty (06->) / Compass (07->) / Patriot (07->)

Used for pulling off the selector gear with synchronizer hub on 5-speed manual gearbox 0A4 6-speed manual gearbox 02S OEM: T10309A

AVAILABLE FOr FOr AVAILABLE

RENTAL

$415 GST Universal DM11-D2235 Transmission Fluid Filler Pump and Adapter Set 12.5L .00

EXC

$33.00

EXC GST

DM11-C1552

7 Speed Mechatronic

Unit Remover

12.5L reservoir with manual pump and fittings for pneumatic filling and a 15 piece adapter kit to suit most common transmission filling ports under vehicle. Fantastic fluid filling unit - A must for all workshops!

Specially designed to remove load from plungers of mechatronic units when you insert the tool between clutch lever and gear housing. This tool will allow removal of the valve body.

USE WITH DM11-D1552 Mechatronic alignment pins.

Models: Honda / Nissan / BMW / Audi VW (Multitronic CVT and DSG) / Porsche / Volvo / Ford / GM / Mini Cooper / Mercedes Benz / Toyota / Lexus / Hyundai / Kia / Mazda

Models: VW / AUDI 7-speed dual clutch gearbox | OEM: T10407

$235.00

NEW!

EXC GST

Ford Powershift

DM11-B1847

Transmission Dual Clutch

NEW!

Ford Dry Type Transmission Oil Seal I/R

AVAILABLE FOr FOr AVAILABLE

RENTAL

Specially designed to use on dry type transmission oil-seal installer / remover.

AVAILABLE FOr FOr AVAILABLE

$489.00

Removal & Install Tool

AVAILABLE FOr FOr AVAILABLE

RENTAL

Designed for replacing the transmission clutch.

Models: Volvo, Ford Transmission DPS6 / DPS6 / 6DCT250 Transmission / DCT250 | Fiesta 2011 - 2018 | Focus 2010 - 2018 | Focus RS 2016 - 2018

RENTAL

DM13-205Z

NEW!

Chrysler

Models: DPS6 / 6DCT250 Transmission / DCT250 | OEM: Ford OEM: 307-675

$499.00

EXC GST

DM11-A1847

$319 .00

EXC GST

DM11-A1900

NEW!

Ford 6-Speed Power Shift Transmission Tool Kit

NEW!

AVAILABLE FOr FOr AVAILABLE

Ford / Volvo DCT Sealing Cover Removal & Installation Tool

RENTAL

Models: Automatic Transmission vehicles with 6-Speed automatic transmission DPS6 / 6DCT250 OEM: OEM reference number 307-676

For removal of the clutch cover on the Ford MPS6 / 6DCT450 transmissions. Required when servicing the dual clutch assembly.

18

EXC GST

DM11-A1751

Ford 6-Speed Powershift Transmission Tool Kit. Clutch Reset - Pre-load Kit.

All prices are Excluding GST

EXC GST

Models: Ford - Focus / Mondeo / Volvo OEM: 308-764 / 303-783

GEN2 Wheel Bearing Removal and Installation Tool Kits

NEW!

$395.00

EXC GST

NEW!

NEW!

$395.00

AVAILABLE FOr FOr AVAILABLE

RENTAL

EXC GST

$395.00

AVAILABLE FOr FOr AVAILABLE

RENTAL

DM13-C723-66

DM13-C723-62

EXC GST

AVAILABLE FOr FOr AVAILABLE

RENTAL

DM13-C723-72

Ozwide Tools now carries all individual GEN 2 "ON CAR" wheel bearing kits as individual sizes. The wheel bearing kits are cross referenced by the diameter of the wheel bearing you are using. These kits make this job a quick and easy process.

VW / Audi range consist of: 62mm / 66mm / 72mm / 85mm

$405.00 AVAILABLE FOr FOr AVAILABLE

RENTAL

$395.00

EXC GST

DM11-A1583

AVAILABLE FOr FOr AVAILABLE

RENTAL

EXC GST

DM21-130814-03

Ford Focus / Mazda 3 Volvo Front Wheel Hub and Wheel Bearing

Ford / Land Rover / Volvo Front Wheel Hub and Wheel Bearing

For removing and installing the wheel hubs with 78mm bearings on Ford models

For removing and installing the wheel hubs with 82mm bearings on Ford and Volvo models from 2007 onward.

Removal & Installation Kit - 78mm

Models: Ford: Focus (LT / LS) / Focus C-Max | Volvo: C30 / V40 / V50 / C70 Mazda: 3 (BK / BL)

Removal & Installation Kit - 82mm

Models: Ford: Focus (LW/LZ) / Mondeo (MB/MC/MD) | Volvo: XC60 / XC70 / V70 / S80 (From 2006) Land Rover: Freelander 2 (From 2006)

$395.00 AVAILABLE FOr FOr AVAILABLE

RENTAL

EXC GST

DM21-4319

VW Gen2 Wheel Bearing Removal & Installation Tool Kit T5 / Touareg (85mm)

For assembly and disassembly of GEN 2 style wheel hub and bearing unit. Suited for wheel bearing diameters 85mm which are found on T5 and Touareg models. Note: The wheel hub unit MUST be pushed on the outer bearing ring, behind the locking crown.

Using a press on the centre flange will cause premature bearing failure, or destroy the bearing whilst installing.

This tool makes an otherwise very difficault job extremely simple and fast!

Models: VW Touareg / Transporter

$310.00

EXC GST

AVAILABLE FOr FOr AVAILABLE

RENTAL

DM11-C1095

$1,095.00

EXC GST

DM13-5799

VAG GEN 2 Wheel Bearing Master Kit 62, 66, 72 & 85mm GEN 2 wheel bearings need special tools to remove them from their drive flange assembly, which is where this kit comes in to make it a very simple quick process that otherwise is a headache without the tooling. This kit allows bearing replacement ON CAR without removing the ABS sensor, and ensures the loads are taken only on the outer race of the bearing. GEN 2 wheel bearing tool fitment is based off the actual wheel bearing size.

Set includes hub shell sizes to suit: 62mm / 66mm / 72mm / 85mm found on a large range of VW & Audi vehicles Front & Rear

$395

.00 EXC

AVAILABLE FOr FOr AVAILABLE

RENTAL

GST

DM11-B1008

Universal Master ON CAR Wheel Bearing Tool Kit Wheel bearing extractor and installer tool that can be used to replaced wheels bearings "ON CAR" without removing the stub assembly and various knuckles that are attached. This kit will work with any stub assembly that has a CV shaft running through the middle of it, even IRS systems.

NOTE: Must separate wheel hub first to access wheel bearing. Use in conjunction with DM11-C1095-5H | Models: Mercedes Benz, BMW, VW, Volvo, Ford and many others including Japanese vehicles. Great time saving tool!

Heavy Duty Hub Puller Slide Hammer with 5

Slot Euro Bell Hub Heavy duty hub extraction slide hammer with 5 slot hub adapter to suit most European vehicles. Grooved slots to suit various 5 stud vehicles Models: BMW (E36 / E46) COMMODORE / BENZ / AUDI / VW and most European vehicles with 5 stud wheels

All prices are Excluding GST

19

$215

.00

$165.00

EXC GST

EXC GST

DM13-BA26

DM10-OILFILL-SET

NEW!

24pc Oil Fill Set Filling up the oil on many newer engines can take an extremely long time now to fill with engine oil when doing an oil change. Some engines can take up to 15 – 20 mins to fill. Keep your technicians working on other parts of the service, while this kit fills the engine oil for you. Simply choose the correct adapter that will fit your rocker cover. Connect the funnel, fill with \oil and let it slowly drain in while you keep working on the vehicle. Complete the process until you are happy with the level.

Kit also comes with an air regulator piece to assist with draining all the old waste oil out.

JPT Terminal Crimp and Pin Release Tool Kit This quality kit comprises of two pin release tools to suit a broad range of connectors commonly found on VAG, BMW, JLR, Mercedes Benz, Ford vehicles and many other makes. The kit also includes a crimp tool with two die sets designed for JPT and MCP flat male and female terminals, sealed and unsealed, from 0.2mm2 to 2.5mm2. For perfect crimp connections on even the smallest wires.

A must have kit for all workshops!

$198.00

$69.00

EXC GST

DM11-C2135

EXC GST

DM13-4AZ5

NEW!

$170.00

EXC GST

Air Powered Calliper Wind Back Tool

6pc Oil Drain Plug Wrench Kit

Sump Plug Kit

Latest air powered wind back tool kit with adapters to suit a huge range of vehicles 23 PCS Includes the 3 pin adapter that suits many of the Euro vehicles including VW, Audi, BMW, Renault and more.

This is the latest adapter set for removing and installing plastic oil pan drain plugs found on a large range of vehicles and trucks Includes 5 specialty adapters and comes with a 3/8 drive “T” Handled driver.

Kit contains 4 x replacement plastic sump plugs for each of the following models: Ford / VW / BMW / Mercedes / Peugeot & Citroen (20 sump plugs in all)

If you have not used an air powered brake calliper wind back kit yet, you will wish you had of bought one a long time ago!

Suits: Ford / Peugeot / Citroen / Mercedes / BMW / VW / Audi / Skoda / Seat / Porsche / DAF / MAN

$85.00

EGT 6pc Socket Set

EXC GST

DM13-8163

NEW!

20

Overhead Camshaft Valve Shim Adjusting Tool

All prices are Excluding GST

Also includes the Tool & Tool adaptors to fit each make.

Be ready for these services!

EXC GST

DM13-7A03

This set is designed to remove most EGT sensors used in light to medium and heavy duty trucks. Kit includes 3 different sizes in tall and short. 13mm, 14mm & 17mm

$86.00

DM-SUMPPLUG-KIT

Valve adjusting tool used on many overhead camshaft design engines for replacing the valve shims.

Compresses the valve spring / lifter to enable the shim to be removed and replaced without removing the camshafts.

Models: Opel / Peugeot / Toyota / Volvo and many others | OEM: Toyota 09248-64011

AVAILABLE FOr FOr AVAILABLE

RENTAL

$210.00

EXC GST

DM13-3590A

Turbo Charging System Pressure Test Kit - 9 Piece

Helps to locate leaks in the components of turbocharger systems such as pressure hoses, air-to-air intercooler, etc. Testing must be performed when engine is switched off. For professional and economic diagnosis.

IMPORTANT: Regulate air pressure in tester to 25psi maximum.

Connect an airline with known air pressure to the regulator of the tester with the ball valve shut (operating lever at 90° to hose axis).

Refer to manufacturer’s manual relating to the maximum air pressure of the turbo or other system being tested. Over pressurisation may damage system components. For example the maximum pressure in most vehicle turbo systems is approximately 15psi (1bar) up to 25ps (1.7bar). A vehicle coolant system is typically rated at 15psi. A graduated approach to leakage testing is recommended.

$159.00

EXC GST

DM13-5121

NEW!

8pc Pneumatic Fan Clutch Wrench Kit

Quickly removes and installs fan clutch when repairing the water pump or fan clutch. Faster and easier than conventional fan clutch wrenches. No holding wrench is necessary.

Set includes 7 driving wrenches that fit Ford, GM, Chrysler & Jeep plus many more!

Set now includes 7/8", 32mm, 36mm, 40mm thin and new 47mm size to fit Ford 6.0L and 6.4L Power stroke diesel pickup. 1-7/8"and 2" are also included in the set.

Use with an air chisel hammer - Not Included

$163.00

NEW!

$59.00

33pc 1/4dr 72 Tooth Driver Bit Set

EXC GST

DM13-1850

33pc Bit Set with 1/4 dr 72 teeth driver. Fantastic kit for those tight spaces and includes the most popular bit sizes, including Euro vehicles.

Includes Sizes: 3-PH1. PH2. PH3, 3-PZ1.

PZ2. PZ3, 4-M4. M5. M6.

M8, 5-H2. H3. H4. H5. H6 7-T10. T15. T20. T25. T27.

T30. T40, 3-T10H. T15H. T20H, 5-Flat3. Flat4.

Flat5. Flat6. Flat7

Hydraulic Ram CV Shaft Expeller

EXC GST

DM-OILPRESSURE-TEST

$165.00

AVAILABLE FOr FOr AVAILABLE

RENTAL

$325.00

Twin Gauge Oil RENTAL Pressure Test Kit

AVAILABLE FOr FOr AVAILABLE

.00 EXC GST

DM10-IP65

This tool can read a wide range of fluids including ethylene and propylene glycol as either a percentage of content or a freezing point as desired. Also will read AdBlue, Battery Fluid and Windscreen wash. This electronic type refractometer is highly accurate, simple to use and compensates automatically for temperature.

AVAILABLE FOr FOr AVAILABLE

RENTAL

Universal Crankshaft & Camshaft Pulley Puller Kit

CV shafts can be extremely difficult to remove. This tool is a heavy duty version which uses hydraulic pressure to screw down and push out even the most stuck CV shafts.

Large diameter bell hub with 10 holes for locating on a huge range of wheel bolt points.

Special puller tool for removal of small gears, pulley's, cam sprockets and hubs where clearance is tight.

Depth: 2 sizes: Large 72mm / Short 22mm / Combined 94mm Feet Lip: 17mm to grab with Diameter Range: 55mm-210mm Across

Includes a 5pc nut and washer set Disk Diameter: 164mm / Hole lengths: 55mm, 64mm, 75mm Working Range: 96 - 138mm

Universal Hydraulic Gear Puller Set

$355.00

Hydraulic puller kit rated up to 10 tonne for internal and external pulling.

RENTAL

EXC GST

DM13-C709 AVAILABLE FOr FOr AVAILABLE

Designed for use as a 2 or 3 leg puller with 100mm, 150mm, and 200mm attachments. Also includes a 75mm-1050mm bearing separator.

$89.00

Digital Refractometer

EXC GST

DM11-A1115

EXC GST

DM13-06GL

Oil pressure test kit for engine oil and automatic transmissions. Kit comes complete with adapters for most applications and is designed to be used for both static and on road testing. 1 x 215cm hose assembly to generously allow for visual ON-ROAD testing. 2 x 10cm large head pressure gauges for easy reading. First gauge reads 0-100 psi/0-700 kPa to make it possible to get more accurate test results. Second gauge reads 0-400 psi/0-2800 kPa, Adapters for most applications.

$329

NEW!

EXC GST

DM10-501AD

ADBlue Refractometer The DM10-501AD adblue refractometer provides an accurate and fast method to ensure the fluid sample from the tank, or the fluid you are about to add to the tank,meets the required standard All prices are Excluding GST

21

Test Leads NEW! Multicolour 5pc Set This 5 piece set of test / jumper leads are fitted with 4mm piggyback style terminations.

They are designed to connect with all standard 4mm test probes, crocodile clips and diagnostic accessories. They fit all 4mm standard multimeter inputs, and can be used to extend test $33.00 EXC GST leads and make up individual jumper DM14-1036 cables.

Current Clamp, BNC Connector AC/DC 650 Amp

$181.00

EXC GST

DM16-CC-650

An ac/dc current clamp with a frequency range up to 400Hz with an effective current range from 20mA to 650A in 2 scales. 1mV/ 1A and 1mV/ 100mA. With a conductor diameter up to 25mm. Designed for automotive applications, e.g starter current draw, relative compression test, alternator output etc. fitted with a bnc connector for use with all oscilloscopes. When combined with the DM16- CC65 below will cover all automotive test scenarios.

Current Clamp, BCN Connector AC/DC 65 Amp

$165.00

EXC GST

DM16-CC-65

An ac/dc current clamp with a frequency range to 20khz with an effective current range from 20mA to 65A, in two scales. 1mV/ 100mA and 1mV/ 10mA with a conductor diameter of up to 9mm. Designed for automotive applications, e.g. fuel pump, fan motors, parasitic battery drain etc. compatible with all oscilloscopes fitted with bnc connectors, and can also be used with DVOM via suitable adapter.

$36.00

EXC GST

$36.00

DM16-HT306-2_3MM

NEW!

EXC GST

DM14-T307

6 Way Breakout Leads 2.3mm Terminals

5pc probe set all in different colours. Each probe has a sharp pin ideal for piercing the insulation of small gauge wire.

Needles in the probes are replaceable, simply screw out and screw new one in. Complete probe length 65mm / Length of needle 37mm.

This 6 way breakout lead features the 2.3mm terminal male to female blade type terminal sizes, which are commonly found on automotive sensors, actuators, harness connectors and control modules.

Kit contains: 5 x Complete Acupuncture Probes | 10 x Replacement Needles

Each lead is spliced to a 4mm female banana type plug, and this particular breakout lead is identified by a colour Red.

$169.00

44 Piece Automotive Lead Set Kit includes, Piercing Test Needles, Replaceable Needles, Alligator Clips Large and small, Piercing Test Hooks, Flexible Testing Probes, BNC 4mm Safety Stacking Banana Plug Test Leads, Multimeter Leads and Many More!

DM16-HT306-2_8MM

NEW!

6 Way Breakout Leads 2.8mm Terminals This 6 way breakout lead features the 2.8mm terminal male to female blade type terminal sizes, which are commonly found on automotive sensors, actuators, harness connectors and control modules.

22

All prices are Excluding GST

NEW!

NEW!

EXC GST

Each lead is spliced to a 4mm female banana type plug, and this particular breakout lead is identified by a colour Black.

These leads have been developed to allow for interconnection between sensors or actuators with up to six connector pins and their harness plugs.

EXC GST

DM14-1600F

These leads have been developed to allow for interconnection between sensors or actuators with up to six connector pins and their harness plugs.

$35.00

Automotive Diagnostic Test Acupuncture Probe Pin Set

Crocodile Clips 2pc Red and Black A good quality pair of Alligator clips to add to your diagnostic test lead set up. Includes 1 x Red and 1 x Black

$45.00

EXC GST

DM14-1300C

18 Piece Multimeter Probe Lead Kit Fantastic addition to your multimeter.

Kit includes, - Red-Black banana plug testing leads - Interchangeable probes - Interchangeable testing pins - Red & black alligator clips - IC testing hook

$17.00

EXC GST

DM14-MULTILEADS

Multimeter Test Leads NEW!

$26.00

EXC GST

DM16-HT18A

4mm banana plug multimeter test leads. 90 degree angle to straight style. Industry standard 4mm banana plugs to connect with alligator clips, back probes etc. Durable and safe.

Rated 15A / 1000V Line Length 100cm

$309.00

NEW!

EXC GST

Coolant DM33-550000 Airlock Eliminator Eliminate airlocks in vehicle cooling systems and refills in seconds.

OEM approved.

NEW!

Refills the entire cooling system including the heater core. Eliminate time consuming bleeding and purging Check for leaks while under vacuum Works on: Cars, Trucks & Off Road Vehicles.

12 Volt Mini $54.50 EXCGST Oil Sucker DM03-OILS-MINI This tool is designed to suck out oil from hard-to-reach places or via the dipstick tubes of vehicles that do not have a sump plug.

This portable light weight unit and uses the vehicles 12-volt battery supply.

Simply use a waste bucket for the fluid you wish to extract and that’s it!

$480.00 $395

EXC GST

DM13-019D

.00 EXC GST

DM30-1426

Universal Vehicle Stethoscope (Electronic)

$149 .00

DM21-1260HB

Electronic Stethoscope for on car location and diagnosis of noise emissions.

Universal Radiator Pressure Tester Kit 31pc

Helps pinpoint the source of abnormal NVH issues, with dual connections for demonstration to clients on test drives or output to a recording source.

Set for testing leaks in automotive cooling systems and also has the facility to refill the cooling system without air locks via the set’s Vac down system!

Containing two sets of headphones, test clamps, magnetic test sensor and probe, fastening tapes, and the main control box.

EXC GST

Cooling System Airvac Adapter Kit

Most later model vehicles are becoming more difficult to bleed air out of the system.

This eliminates air locks in the cooling system when replacing the coolant in the cooling system.

This is essential with most modern systems.

Biggest kit on the market currently and suits all major vehicles from Asian, European, American and Domestic vehicles. Comes with right angle adaptor for tight spaces.

$139.00

EXC GST

DM33-560000

NEW!

$190 .00

EXC GST

DM12-3121

Combustion Leak Tester Kit

Catalytic Converter Carbon Cleaning Pressure Gun - 650ml

A Fast, Economical and Accurate method to test for combustion gas leaks from:

Clean out the carbon build-up and contaminants blocking the catalytic converter or DPF which in turn causes poor performance.

Uses a universal fitting to deliver cleaning fluid under pressure through the O2 sensor or DPF sensor ports.

Head gasket leaks Cylinder head leaks Engine block leaks NEW & IMPROVED! Dual-Chamber for Higher Accuracy Test

650ml Stainless Steel Canister with an Aluminium base.

Pressure range: 45 Psi - 100 Psi All prices are Excluding GST

23

This trolley has 3 large lockable drawers that can be accessed on both sides.

$1,680.00

EXC GST

DM11-F2060-DIAG

Automotive Diagnostic Trolley

It comes with a swivel stand to mount a laptop or diagnostic device at a good workable visual height.

The diagnostic trolley also includes a mounted power supply for 5 Australian power plugs.

We have also included a swivel boom to hang your Picoscope, ATS or any other oscilloscope you may have including plenty of space to hang current clamps and other diagnostic leads.

A printer can easily be stored at the base of the trolley. Maximum printer size 470mm x 525mm x 260mm high This has been designed with the Automotive Technician in mind.

A great professional looking addition to your workshop!

Dimensions: •Body & Legs: 765mm x 490mm x 948mm (1050mm including the casters) 1 x Drawer - 576mm x 415mm x 75mm high 2 x Drawers - 576mm x 415mm x 154mm high •Swivel Boom: maximum height of 2290mm •Laptop Swivel Stand •Colour: Blue

Hire Department

Powered By OZWIDE Tools cannot be held responsible for any damage caused by using these tools in any way. Always use a reputable workshop manual.

OZWIDE TOOLS / MECHANICS TOOL HIRE is not affiliated with any vehicle manufactures and any OEM numbers listed is for reference only as these tools are not original OEM tools made by the car manufacturers unless stated Specifications are subject to change without notice This is an uncontrolled document E & OE

01 June to 30 November 2022 st

th

1300 80 60 65 ozwidetools.com.au