Materials Australia Magazine | December 2023 | Volume 56 | No.4

Page 15

MATERIALS AUSTRALIA

WA Branch Meeting Report - 13 November 2023 How Solar Cells Work at the Atom Scale Source: Dr Gilles Dour, Advisian The Western Australia Branch hosted a technical meeting in mid-November. Dr Giles Dour (Principal Integrity Engineer with Advisian) gave a presentation on the topic How solar cells work at the atom scale. Dr Dour recalled his time as a doctoral candidate in France in the mid-1990s, when he was undertaking research into silicon production for solar cell applications. He has maintained a strong interest in the development of photovoltaics (PV) ever since. Gilles explained that he had become involved with PV through a family connection. His uncle had founded a solar panel manufacturing business, subsequently sold to EDF. Gilles, who had just completed a Master’s degree in materials engineering, had been just the right person to work on a research project in continuous solidification of PV crystalline silicon. His research extended further into PV manufacturing processes, giving him a solid grounding in the business aspects of PV, and the continuing quest for higher conversion efficiency. Gilles referred the National Renewable Energy Laboratory (NREL) chart to show the remarkable progress of PV panel efficiency since the 1970s. Each of the silicon-based technologies has shown steady progress, but with step changes between technologies. The efficiency of multi-junction cells has now reached 48% in the laboratory. Some emerging (non-silicon) technologies, although only now approaching 20% efficiency, are advancing at faster rates than silicon technologies.

L to R: Ehsan Karaji, Dr Gilles Dour

the appropriate wavelength interacts with a semiconducting material, an electron is promoted from the valence band to the conduction band, leaving a positive electron hole. In the absence of an electric field, the electrons and electron holes diffuse separately and at random until they eventually collide and disappear by pair annihilation. Impurities, crystal defects and grain boundaries promote pair annihilation, which is why high-purity single crystal silicon allows higher efficiency, though not necessarily more cost-effective PV cells.

the waste silicon being diverted to much lower value uses. Gilles went on to describe how he had undertaken research into growing 250 μm ribbons of silicon direct from the melt. These are multi-crystalline, and not as efficient, but much cheaper than single crystal silicon.

The phenomenon at the heart of PV is that when electromagnet radiation of

This led to a description of how silicon ingots are cut into 250 μm wafers; this incurs about 50% wastage, with

Producing free electrons and holes is the start of the process, but the vital step in turning the phenomenon into a useful energy conversion device is creating the cell; this establishes the electric field which imposes a gradient on charge carrier diffusion. The cell is created by doping the silicon so that it is a p-type semiconductor, and then doping a very thin (less than 1 μm) n-type layer, usually on the light-facing (‘top’) surface. Electrical contacts are then formed on the p-type and n-type , typically with a conducting grid, with another electrical connection on the ‘bottom’. These are joined to form a circuit through an electrical load. In the absence of light, this is simply a semiconductor diode, but when light of the right wavelength range falls on the surface and free charge carriers are created in the bulk material, current will flow, with voltage related to current. Holes move through the p-type

WWW.MATERIALSAUSTRALIA.COM.AU

BACK TO CONTENTS

DECEMBER 2023 | 15

Gilles’ talk ranged from physics, with the quantised nature of electromagnetic radiation and the relationship between light wavelength and energy, through materials science, and band gaps in semiconductors, on to the materials engineering involved in silicon crystal growth, and then to manufacturing engineering in producing commercial solar PV panels.

Gilles then outlined the processes using producing high-purity silicon and growing single-crystal ingots. In explaining this, Gilles noted out the common misconception that the PV phenomenon is a surface effect. In fact, sunlight penetrates silicon to a depth of around 200 μm before it is completely absorbed. This is why the silicon in PV cells is typically in the form of wafers around 250 μm thick.


Articles inside

Short Courses - Study at Home

4min
page 62

Beyond Reality: : How Australia's Manufacturing Industry is Embracing VR

6min
pages 50-52

Custom Metal Powder Production Using Ultrasonic Atomisation

3min
pages 38-39

Prof Julie Cairney awarded the Florence M. Taylor Medal

1min
pages 25-26

Why You Should Become a Certified Materials Professional

1min
page 25

CMatP Profile: Dr Jeff Gates

4min
pages 22-23

SEAM Profile: Minh Nhat Dang

3min
pages 20-21

NSW Branch Report

3min
page 19

VIC Branch Report - 25th Annual Technologists' Picnic

2min
page 18

Carbon Capture and Storage Projects

4min
pages 16-17

MATERIALS AUSTRALIA WA Branch Meeting Report - 13 November 2023

3min
pages 15-16

MATERIALS AUSTRALIA WA Branch Technical Meeting - 11 October 2023

3min
page 14

WA Branch Technical Meeting - 14 August 2023 The Effect of Surface Indents from Hydrotest Plugs on Sulphide Stress Cracking (SSC) Resistance

3min
pages 12-13

QLD Branch Report - MISE2023

3min
page 10

MATERIALS AUSTRALIA MISE2023 Conference - University of Queensland

4min
pages 8-9

From the President

2min
pages 4-7
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.