“Precision Under Pressure”
Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com
‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701
‘93 Barko 180B
Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703
‘95 John Deere C6 Tree Farmer ‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703
13428 Victory Ln. // PO Box 124 Adams Center, NY 13606
off onto a conveyor. This is a very
well built processor. Item ID 13820. Sam x702
Firewood Processor - This is
‘05 Gehl CTL 70
‘83 John Deere 4850
Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good
condition. Easily produces high
quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
EDGERS & GANGS
Brewco Saws - Two Brewco Saws
in excellent condition. Runs great. Item ID 13644. Sam x702
FIREWOOD PROCESSORS
2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40
inch insert tooth circle saw, 30 foot Issue 364 386
Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on
20,000lb goose neck trailer. Item ID 13916. Austin x703
Best Value Portable Log Splitter - Small manufacturer in PA has
made the best valued log splitter.
a Chomper Model 16 PDA
automatice firewood processor
with John Deere power unit with
low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all
manuals and receipts. Purchased new for $32,500. Item ID 13865. Sam x702
LOGGING EQUIPMENT BANDIT
Handles logs up to 32”. Uses
1999 Bandit 1900 Tracked Disc
but electronic option is available.
50% or better. 475 hp Cummins
13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge
adjustable to single two way. Great
Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a
homemade processor with a 10’
log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power
unit. Has a 4’ chain saw that kicks
Lumbermens™ since 1986
❘
Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.
Well maintained. Item ID 13294. Sam x702
2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in
Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703
capacity!. Item ID 13421. Sam x702
BARKO
1994 Barko 160B - Electric
knuckleboom, 30' boom, 75hp motor, Rotobec continuous
grapple, 5,000 original hours.
(excellent condition.). Item ID 13238. Chris x700
1995 Barko 775 B Feller Buncher
- Pumps recently redone. 400 hrs
on injection pump. always started
good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702
1999 Barko 160D - new engine with approximately 1500 hours. Hour
meter dont work. The last 2 owners have only used it to load trucks or
as a backup as needed. Has a CTR
delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702
94 Barko 275 - Excellent value
with low at hours at 3,500. 5.9
CUMMINS continuous grapple.
Runs Great!. Item ID 13740. Sam x702
BELL
good condition. Just finished 10
1990 Bell Super T - This Bell has
Remote control. Big production
control, 33” bar, pump and tranny
Acre clearing job, ready to work!
List seLL exchange buy save
a brand new Duetz engine. Lever
❘
LumbermensCO.com