How to Write Off Trucks, Trailers, and Heavy Equipment in 2025 (Thanks to the Big Beautiful Bill)
Section 179 truck write-off 2025 — If you’re a contractor, trucker, or business owner — this might be the best time in years to buy equipment. That’s because there’s a government tax rule that
‘05 Gehl CTL 70
Item ID: JW-986495
‘83 John Deere 4850
Item ID: 14073
Contact: Austin
‘93 Barko 180B
lets you write off the full cost of trucks, trailers, and heavy equipment in the same year you buy it.
‘16 Halverson H140 Skidsteer (DEMO)
Item ID: 14077
Contact: J Williams Ph: (888) 401-6367 x701
Ph: (888) 401-6367 x703
with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703 EDGERS & GANGS
Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702
FIREWOOD PROCESSORS
2010 Shop Built Wood Processor
-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot
chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703 Best Value Portable Log Splitter
-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702
Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks
It’s part of what people call Trump’s “Big Beautiful Bill.”
Item ID: JW-909632
Contact: J Williams Ph: (888) 401-6367 x701
Contact: Austin Ph: (888) 401-6367 x703
And it’s real. We’re seeing customers save tens of thousands of dollars — even more — just by taking advantage of it.
WHAT IS THE “BIG BEAUTIFUL BILL”?
Back in 2017, a new tax law was passed that helped business owners write off big purchases — like trucks and machinery — all at once, instead of slowly over time. That law is still active, and it’s called Section 179 + Bonus Depreciation.
‘13 KMC 2500 Track Skidder
Item ID: 14078
‘95 John Deere C6 Tree Farmer Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703
At the same time, the Bipartisan Infrastructure Bill was passed a few years later, pumping over $1.2 trillion into roads, bridges, water systems, internet, and other projects across the U.S.
Contact: Austin Ph: (888) 401-6367 x703
LUMBERMEN’S Equipment Digest PO Box 1146 Columbia, TN 38402-1146
That means:
capacity!. Item ID 13421. Sam x702 BARKO
• A lot more work for contractors and companies
off onto a conveyor. This is a very well built processor. Item ID 13820.
Sam x702
Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.
Sam x702
LOGGING EQUIPMENT
1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294. Sam x702
2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production
1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700 1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great.
(Continued on page 22)
1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.
94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam
1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33”
(Continued from page 20)
• A lot more demand for trucks, trailers, and heavy machinery
“Precision Under Pressure”
• A bigger reason to buy now and grow your business
WHAT CAN YOU WRITE OFF?
You can write off almost any business equipment — even if it’s used.
That includes:
• Dump trucks
• Water trucks
• Day cabs and sleepers
• Lowboys and tilt decks
• Utility trailers
• Excavators, dozers, loaders, and more As long as it’s used for business and put in service before December 31, 2025, it qualifies.
HOW MUCH CAN YOU WRITE OFF?
This is where it gets good.
In 2025, you can:
13428 Victory Ln. // PO Box 124 Adams Center, NY 13606
• Deduct up to $1,220,000 using Section 179
• Then deduct 60% of anything above that using Bonus Depreciation.
EXAMPLE:
Let’s say you buy $1.5 million worth of trucks, trailers, or equipment this year.
• You write off $1,220,000 with Section 179
• That leaves $280,000
‘16 Halverson H140 Skidsteer (DEMO)
‘93 Barko 180B
Item ID: 14077
• You can then write off 60% of that ($168,000) with Bonus Depreciation
Contact: Austin Ph: (888) 401-6367 x703
‘83 John Deere 4850 Item ID: Contact: Ph:
with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702
2010 Shop Built Wood Processor
-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot
goose
Item ID: JW-909632
Total deduction: $1,388,000
Contact: J Williams Ph: (888) 401-6367 x701
That’s a huge tax break for doing what you were going to do anyway — buying equipment for work.
WHAT’S THE CATCH?
There’s really just one:
The truck, trailer, or machine must be delivered and in service before December 31, 2025.
So don’t wait until the last week of the year. Inventory goes fast. Get what you need now — and start putting it to work.
WHY ARE PEOPLE TALKING ABOUT THIS NOW?
‘13 KMC 2500 Track Skidder
Item ID: 14078
Contact: Austin Ph: (888) 401-6367 x703
Because the infrastructure money is flowing, and a lot of contractors are finally landing the jobs they’ve been chasing for years.
That means demand is up. And people who move early are getting the best deals — and the best tax savings.
Value! PA. Item ID 12062. Sam x702
1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294. Sam x702
2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just
20,000lb
neck trailer. Item ID
13428 Victory Ln. // PO Box 124
‘05 Gehl CTL 70
Item ID: Contact: Ph: ‘83 John Deere 4850
Item ID: 14073
Contact: Austin
Ph: (888) 401-6367 x703 ‘13
with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702
FIREWOOD PROCESSORS
2010 Shop Built Wood Processor
-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot
chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703
Best Value Portable Log Splitter
-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702
Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks
KMC 2500 Track
Item ID: 14078
Contact: Austin
Ph: (888) 401-6367 x703
off onto a conveyor. This is a very well built processor. Item ID 13820.
Sam x702
Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.
Sam x702
LOGGING EQUIPMENT BANDIT
1999 Bandit 1900 Tracked Disc
Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.
Sam x702
2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production
capacity!. Item ID 13421. Sam x702 BARKO
1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours.
on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702
1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702
1992 TIMBERJACK 240 CABLE SKIDDER Item ID: 7478
Contact: WALKER
Email: Walker@lumbermensco.com
Phone: 888-401-6367 EXT 707
BARKO
Contact: WALKER
Email: Walker@lumbermensco.com
Phone: 888-401-6367 EXT 707
Contact: WALKER
Email: Walker@lumbermensco.com
888-401-6367 EXT 707
Phone: 888-401-6367 EXT 707 2005 TIGERCAT 240B LANDING LOADER Item ID: 7539
Contact: WALKER
Email: Walker@lumbermensco.com
Contact: WALKER
Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707
Phone: 888-401-6367 EXT 707 1999 FRANKLIN 105 FELLER BUNCHER Item ID: 7470
Contact: WALKER
Email: Walker@lumbermensco.com
Phone: 888-401-6367 EXT 707 2006 JOHN DEERE 755C CRAWLER LOADER Item ID: 7466
Email: Walker@lumbermensco.com
Email:
2005 JOHN DEERE 548G3 GRAPPLE SKIDDER
Item ID: 7678
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
1990 JOHN DEERE 540B CABLE SKIDDER Item ID: 7327
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
13428 Victory Ln. // PO Box 124 Adams Center, NY 13606
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
‘83 John Deere 4850
Item ID: 14073
Contact: JOE
Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170
‘05 Gehl CTL 70
Item ID: Contact: Ph:
FRANKLIN 170 GRAPPLE SKIDDER Item ID: 5093
‘16 Halverson H140 Skidsteer (DEMO)
Item ID: JW-909632
Contact: J Williams Ph: (888) 401-6367 x701
2015 JOHN DEERE 648H GRAPPLE SKIDDER Item ID: 7599
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
2004 CAT 525B GRAPPLE SKIDDER
Item ID: 7349
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
‘13 KMC 2500 Track Skidder
Item ID: 14078
Contact: Austin
JOHN DEERE 648H GRAPPLE SKIDDER
Item ID: 7245
Ph: (888) 401-6367 x703
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
off onto a conveyor. This is a very well built processor. Item ID 13820.
Sam x702
2007 CAT 525C GRAPPLE SKIDDER Item ID: 6927
capacity!. Item ID 13421. Sam x702 BARKO
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
Contact: Austin Ph: (888) 401-6367 x703
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
Phone: 888-401-6367 EXT 709 (C) 801-362-2170 98′ JOHN DEERE 648G GRAPPLE SKIDDER Item ID: 4510
with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702
chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703
Contact: JOE
Email: Joe@lumbermensco.com
Best Value Portable Log Splitter
-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702
CLARK H67 GRAPPLE SKIDDER Item ID: 4122
Contact: JOE
Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.
Email: Joe@lumbermensco.com
Sam x702
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
LOGGING EQUIPMENT BANDIT
1999 Bandit 1900 Tracked Disc
Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.
Sam x702
1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702
JOHN DEERE 748H Item ID: 8038
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.
1993 JOHN DEERE 540E Item ID: 8107
FIREWOOD PROCESSORS
2010 Shop Built Wood Processor
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot
Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production
1997 CAT 515
Item ID: 8045
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny
‘95 John Deere C6
1996 TIMBERJACK 380C Item ID: 4825
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
1997 TIMBERJACK 360C GRAPPLE SKIDDER Item ID: 7080
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
90′ TIMBERJACK 240A Item ID: 5082
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
JOHN DEERE 440C’S PACKAGE
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
FMC 210 Item ID: 5526
Contact: AUSTIN
Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029
JOHN DEERE 640C Item ID: 5582
Contact: AUSTIN
Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029
FRANKLIN 170 SKIDDER Item ID: 3517
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
2001 CAT 517 SWING BOOM TRACK SKIDDER Item ID: 7286
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
JOHN DEERE 440C Item ID: 5242
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
1999 JOHN DEERE 640G CABLE SKIDDER Item ID: 7314
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
PRENTICE 210B Item ID: 5085
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
13428 Victory Ln. // PO Box 124 Adams Center, NY 13606
Contact: AUSTIN
Email: Austin@lumbermensco.com
BELL SUPER T CUTTER Item ID: 4952
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
‘83 John Deere 4850
Item ID: 14073
TIMBERJACK 1270 Item ID: 5199
Contact: Austin Ph: (888) 401-6367 x703
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702
‘16 Halverson H140
Item ID: JW-909632
2022 TIGERCAT 620H Item ID: 5334
Contact: J Williams Ph: (888) 401-6367 x701
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
KMC 2500 Track
Item ID: 14078
Contact: Austin Ph: (888) 401-6367 x703
Contact: AUSTIN
Item ID: 5368
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
Email: Austin@lumbermensco.com
‘05 Gehl CTL 70
Item ID: Contact: Ph:
2016 TAJFUN 400 JOY Item ID: 5227
chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029 13′ BARKO 595ML MAGNUM Item ID: 4974
off onto a conveyor. This is a very well built processor. Item ID 13820.
Sam x702
capacity!. Item ID 13421. Sam x702 BARKO
Contact: AUSTIN
Phone: 888-401-6367 EXT 703 (C) 931-797-8029 643J Item ID: 4907 TIMBERJACK 1010 Item ID: 5358
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours.
Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.
Contact: AUSTIN
Email: Austin@lumbermensco.com
1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702
Contact: AUSTIN
Email: Austin@lumbermensco.com
Best Value Portable Log Splitter
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702
Sam x702
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
LOGGING EQUIPMENT BANDIT
1999 Bandit 1900 Tracked Disc
Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.
Sam x702
Phone: 888-401-6367 EXT 703 (C) 931-797-8029 CAT 538 Item ID: 5302
1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.
FIREWOOD PROCESSORS
04′ TIGERCAT 620 Item ID: 4705
18′ JOHN DEERE 753J Item ID: 4968
2010 Shop Built Wood Processor
Contact: AUSTIN
Email: Austin@lumbermensco.com
Contact: AUSTIN
Email: Austin@lumbermensco.com
Contact: AUSTIN
-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production
Phone: 888-401-6367 EXT 703 (C) 931-797-8029 CAT D5H TSK Item ID: 4939
CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x702 BELL
TIMBCO 445EXL Item ID: 5293
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny
‘95 John Deere C6
Email: Sam@lumbermensco.com
Phone: 888-401-6367 EXT 702 (C) 615-596-4148
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
16′ JD 700K Item ID: 4343
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
2009 JOHN DEERE 540G3 CABLE SKIDDER Item ID: 7299
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
Item ID: 1067 2009 JOHN DEERE 548G3 Item ID: 4699
725B TIMBERPRO Item ID: 1398
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
2012 CAT 525C GRAPPLE SKIDDER Item ID: 7552
Contact: WALKER
Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707
JOHN DEERE 748H Item ID: 2707
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
Contact: ROBERT Phone: 606-875-4783
2019 JOHN DEERE 648L2 GRAPPLE SKIDDER Item ID: 7308
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
JOHN DEERE 648D Item ID: 547
Contact: SAM
Email: Sam@lumbermensco.com
Phone: 888-401-6367 EXT 702 (C) 615-596-4148
JD 450H Item ID: 4327
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
13428 Victory Ln. // PO Box 124 Adams Center, NY 13606
Contact: AUSTIN
Email: Austin@lumbermensco.com
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
Phone: 888-401-6367 EXT 703 (C) 931-797-8029 2015 INTERNATIONAL 5100
‘83 John Deere 4850
Item ID: 14073
PICKER TRUCK Item ID: 7070
Contact: AUSTIN
Contact: Austin Ph: (888) 401-6367 x703
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702
FIREWOOD PROCESSORS
2010 Shop Built Wood Processor
‘05 Gehl CTL 70
Item ID: Contact: Ph: (888) 401-6367 x701
24C SAWHEAD Item ID: 7065
chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
Best Value Portable Log Splitter
-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702
‘16 Halverson H140
Item ID: JW-909632
Contact: J Williams Ph: (888) 401-6367 x701
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
Contact: JOE
Email: Joe@lumbermensco.com
‘13 KMC 2500 Track
Item ID: 14078
Contact: Austin Ph: (888) 401-6367 x703
Contact:
off onto a conveyor. This is a very well built processor. Item ID 13820.
Sam x702
Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.
Email: Austin@lumbermensco.com
Sam x702
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
LOGGING EQUIPMENT BANDIT
1999 Bandit 1900 Tracked Disc
Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.
Sam x702
-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot
Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks
Contact: JOE
Email: Joe@lumbermensco.com
‘95 John Deere C6
capacity!. Item ID 13421. Sam x702 BARKO
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours.
1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702
Contact: JOE
Phone: 888-401-6367 EXT 709 (C) 801-362-2170 02′ CASE 650H Item ID: 3511 Contact:
Phone: 888-401-6367 EXT 709 (C) 801-362-2170 JD 550G LT Item ID: 3686
2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production
Phone: 888-401-6367 EXT 709 (C) 801-362-2170 14' JD 650K LGP Item ID: 3574
Email: Joe@lumbermensco.com
1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.
Runs Great!. Item ID 13740. Sam x702 BELL
1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny
CAT D6K2 Item ID: 1488
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
2004 JOHN DEERE 648G3 Item ID: 2628
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
888-401-6367 EXT 709 (C) 801-362-2170 13′ JD 648H Item ID: 3589
00′ JD 748G III Item ID: 3210
Contact: JOE
Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170
Contact: JOE
Phone: 888-401-6367 EXT 709 (C) 801-362-2170 TJ 460D Item ID: 3286
Contact: JOE
Email: Joe@lumbermensco.com
12' JD 550K LGP Item ID: 3753
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
Phone: 888-401-6367 EXT 709 (C) 801-362-2170 06′ TIGERCAT 635C Item ID: 3322
Contact: AUSTIN
Email: Joe@lumbermensco.com
JOHN DEERE 848H Item ID: 2646
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
CAT 525D Item ID: 3172
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
Phone: 888-401-6367 EXT 703 (C) 931-797-8029 04′ TIMBERJACK 460D Item ID: 2724
98′ JOHN DEERE 648 Item ID: 2798
Contact: AUSTIN
Email: Austin@lumbermensco.com
04′ JOHN DEERE 648G3 Item ID: 2791
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
F666 RANGER Item ID: 3233
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170 02′ TJ 660D Item ID: 4088
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029 12′ TIGERCAT 620D Item ID: 2753
83′ TJ 380A Item ID: 2133
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
13′ CAT 545C Item ID: 2117
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
Contact: AUSTIN
Phone: 888-401-6367 EXT 703 (C) 931-797-8029 CAT 515 Item ID: 1739
Contact: JOE
Email: Austin@lumbermensco.com
‘83 John Deere 4850
05′ VALMET 415 EX TRACK
Item ID: 14073
FELLER BUNCHER Item ID: 8144
Contact: JOE
Email: Joe@lumbermensco.com
Contact: Austin Ph: (888) 401-6367 x703
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702
15′ CATERPILLAR 553C
FELLER BUNCHER
Item ID: 5495
FIREWOOD PROCESSORS
Item ID: Contact: Ph: ‘16
Halverson H140
Item ID: JW-909632
Contact: J Williams Ph: (888) 401-6367 x701
Contact: JOE
Phone: 888-401-6367 EXT 709 (C) 801-362-2170 08′ JD 535 SERIES II Item ID: 4580
10′ JOHN DEERE 648H Item ID: 1847
Contact: AUSTIN
Email: Joe@lumbermensco.com
Item ID: 14078
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
Phone: 888-401-6367 EXT 709 (C) 801-362-2170 17′ JD 437E Item ID: 4809
TIMBERJACK 240A GRAPPLE SKIDDER Item ID: 1769
Contact: Austin Ph: (888) 401-6367 x703
Contact: AUSTIN
Email: Joe@lumbermensco.com
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
off onto a conveyor. This is a very well built processor. Item ID 13820.
Sam x702
‘05 Gehl CTL 70
Contact: AUSTIN
chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703
Email: Austin@lumbermensco.com
Best Value Portable Log Splitter
Phone: 888-401-6367 EXT 703 (C) 931-797-8029 15′ TIGERCAT 724 G Item ID: 3392
-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702
TIGERCAT 630E Item ID: 1098
Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.
TIMBERJACK 460 Item ID: 1777
Contact: AUSTIN
Email: Austin@lumbermensco.com
Sam x702
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
LOGGING EQUIPMENT BANDIT
1999 Bandit 1900 Tracked Disc
Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.
Sam x702
2019 KOMATSU XT445 L-5 TRACK FELLER BUNCHER Item ID: 7243
capacity!. Item ID 13421. Sam
08′ JD 843J Item ID: 2109
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029 17′ JOHN DEERE 843L Item ID: 2731
1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702 1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.
Contact: JOE
2010 Shop Built Wood Processor
Email: Joe@lumbermensco.com
Contact: AUSTIN
Email: Austin@lumbermensco.com
Contact: AUSTIN
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot
Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production
Runs Great!. Item ID 13740. Sam x702
16′ COOKS AE4P EDGER Item ID: 5013
BELL
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny
x702 BARKO
‘95 John Deere C6
PRENTICE
Item ID: 2166
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
Contact: AUSTIN
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170 84' CAT 518 ROTOSAW CUTTER
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
Contact: AUSTIN
Phone: 888-401-6367 EXT 703 (C) 931-797-8029 KOBELCO 250 LOG LOADER Item ID: 2584
Contact: JOE
Email: Austin@lumbermensco.com
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
TIMBCO 415EX Item ID: 1661
Contact: AUSTIN
1/2" or 2"
22ft.
Email: Austin@lumbermensco.com
Set
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
Phone: 888-401-6367 EXT 703 (C) 931-797-8029 2014 PONSSE SCORPION KING Item ID: 4914
Contact: AUSTIN
Email: Austin@lumbermensco.com
ID: 741
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029 VALMET 644 Item ID: 1480
Contact: SAM
Email: Sam@lumbermensco.com
Phone: 888-401-6367 EXT 702 (C) 615-596-4148
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702 CARRIAGES & DRIVES carriage turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls, cabinet with electronic drives for carriage knees, husk including
Item ID: 1246
Contact: SAM
Email: Sam@lumbermensco.com
Phone: 888-401-6367 EXT 702 (C) 615-596-4148
JOHN DEERE 548G
SKIDDER Item ID: 8062
Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707
2006 JOHN DEERE
700J DOZER Item
Contact: WALKER
Email: Walker@lumbermensco.com
Phone: 888-401-6367 EXT 707
13428 Victory Ln. // PO Box 124 Adams Center, NY 13606
‘83 John Deere 4850
Item ID: 14073
Contact: JOE
FOR SALE
‘05 Gehl CTL 70
Item ID: 7406
Item ID: JW-986495
1. Nissan forklift with 4,975 hours has 42″ forks with side shifter
Contact: J Williams Ph: (888) 401-6367 x701
‘16 Halverson H140
Item ID: JW-909632
Contact: J Williams Ph: (888) 401-6367 x701
Contact:
Email:
Contact: WALKER
Email: Walker@lumbermensco.com
Phone: 888-401-6367 EXT 707 1998 CAT 515 GRAPPLE SKIDDER Item ID: 7709
‘13 KMC 2500 Track
Item ID: 14078
Contact: Austin Ph: (888) 401-6367 x703
off onto a conveyor. This is a very well built processor. Item ID 13820.
Sam x702
capacity!. Item ID 13421. Sam x702 BARKO
EXT 703 (C) 931-797-8029
Contact: Austin Ph: (888) 401-6367 x703
Email: Joe@lumbermensco.com
with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702
FIREWOOD PROCESSORS
2010 Shop Built Wood Processor
-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot
2. Foley below-planer Molder, blades included. 1989 model 804
Best Value Portable Log Splitter
chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703
Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.
3. Optima Scale pallet, Truck with built in scale. MODEL- OP-918W-5K 4. NEW TWB40 Tora Max Electric Walkie MODEL-TWB40. 5. 30″ Oliver Vertical Bandsaw 28″ x 26″ table. MODEL-217-S 6. Classic Fence w/standard rails, MODEL-W2005 7. NEW Custom movable fence for Oliver. 8. Tannewitz 30″ Bandsaw MODEL-PH 9. Kreg Bandsaw Fence
1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702
Phone: 888-401-6367 EXT 709 (C) 801-362-2170 Contact: WALKER
MODEL-KMS7200 Carter products guide Assembly 10. Northfield No. 7 Surface Planer, 25″ SKH planer-15HP.DMD,8″ shavings hood with knife grinder/joining attachment; 2 manuals, RE-BUILT, 4-Knife cutterhead Knife set, Dialtype Knife & roll setting gauge 11. Diehl Rip saw with idle conveyor and manual, MODEL-SL52, 1970 PRE-OWNED W/IDLE conveyor & manual wrench 1.75″ open End, MODEL-482-0013 12. Hazel thorn Chop saw
Contact: WALKER
Email: Walker@lumbermensco.com
-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks
Phone: 888-401-6367 EXT 707 WOODSHOP EQUIPMENT
Sam x702
Email:
Phone: 888-401-6367 EXT 707
LOGGING EQUIPMENT BANDIT
1999 Bandit 1900 Tracked Disc
Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.
Sam x702
2022 TIMBERPRO 755D
Item ID: 7924
Contact: AUSTIN
Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170
1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.
Runs Great!. Item ID 13740. Sam x702
BELL
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production
1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
Contact: AUSTIN
Email: Austin@lumbermensco.com
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
SIZER Item ID: 1322
Contact: SAM
Email: Sam@lumbermensco.com
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
Phone: 888-401-6367 EXT 703 (C) 931-797-8029 Contact: AUSTIN
931-797-8029
MORGAN MILITARY
BAND SAW Item ID: 3567
Contact: JOE
Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 709 (C) 801-362-2170
Phone: 888-401-6367 EXT 702 (C) 615-596-4148
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough wheel sides. This machine 130 presses. S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702 CARRIAGES & DRIVES carriage turners, carriage
Contact: AUSTIN
Email:
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
2021 WOODMIZER LT-70 SUPER WIDE Item ID: 7938
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
ID: 7710
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
‘16 Halverson H140 Skidsteer (DEMO)
Item ID: JW-909632
Contact: J Williams Ph: (888) 401-6367 x701
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
Contact: Austin Ph: (888) 401-6367 x703
Item ID: 7553
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
‘13 KMC 2500 Track Skidder
Item ID: 14078
SAWMILL Item ID: 7545
13428 Victory Ln. // PO Box 124 Adams Center, NY 13606
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
‘83 John Deere 4850
Item ID: 14073
Contact: Austin
Contact: SAM
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
‘05 Gehl CTL 70
Contact: Austin Ph: (888) 401-6367 x703
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
off onto a conveyor. This is a very well built processor. Item ID 13820.
Sam x702
Item ID: 5007
capacity!. Item ID 13421. Sam x702 BARKO
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
Item ID: Contact: Ph:
WITH HOOD LOADER Item ID: 1089
Ph: (888) 401-6367 x703
Email: Sam@lumbermensco.com
Phone: 888-401-6367 EXT 702 (C) 615-596-4148 CSI 4400 SLASHER Item ID: 6786
with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702 FIREWOOD PROCESSORS
NYLE FIREWOOD DRY KILN Item ID: 3588
chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703
Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 (C) 615-596-4148
Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.
Best Value Portable Log Splitter
-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702
Sam x702
LOGGING EQUIPMENT BANDIT
1999 Bandit 1900 Tracked Disc
Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.
Sam x702
1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700 1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702
BLOCK SAW Item ID: 5342
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
2010 Shop Built Wood Processor
Contact: AUSTIN
Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot
Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks
Contact: AUSTIN
Email: Austin@lumbermensco.com
Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029 WINCH FOR SALE Item ID: 5413 Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170
Phone: 888-401-6367 EXT 703 (C) 931-797-8029
2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production
1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Runs Great!. Item ID 13740. Sam x702
Item ID: 1051
Contact: AUSTIN
Email: Austin@lumbermensco.com
1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny
Phone: 888-401-6367 EXT 703 (C) 931-797-8029 LOG MAX 7000
with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702
2010 Shop Built Wood Processor
-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot
‘16 Halverson H140 Skidsteer (DEMO)
Item ID: JW-909632
Contact: J Williams Ph: (888) 401-6367 x701
‘93 Barko 180B
Item ID: 14077
Contact: Austin Ph: (888) 401-6367 x703
Value! PA. Item ID 12062.
‘13 KMC 2500 Track Skidder
Item ID: 14078
Contact: Austin Ph: (888) 401-6367 x703
off onto a conveyor. This is a very well built processor. Item ID 13820.
Sam x702
Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.
Sam x702
LOGGING EQUIPMENT BANDIT
1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.
Sam x702
2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production
‘95 John Deere C6 Tree Farmer
Item ID: 13920
Contact: Austin Ph: (888) 401-6367 x703
capacity!. Item ID 13421. Sam x702 BARKO
1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700
1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702
1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702
94 Barko 275 - Excellent value with low at hours at 3,500. 5.9
CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x702 BELL
1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny
20,000lb goose neck trailer. Item ID
Sam x702
