0825lr

Lumber Stacker

NA Stacker, a simple yet advanced modular unit designed for sawmills and pallet operations, handles a wide range of products with ease— nearly any thickness, courses up to 1,600 pounds, and standard lengths of 7’ to 12’, with options from 40” to 20’. Since 2017, NA Stackers have been virtually trouble-free, offering intuitive touchscreen programming, quick changeovers, and self-running efficiency, as confirmed by Chief Engineer Nick Stueven.

Increased Productivity

Our automated stacking systems, with multiple even-ender choices and lateral transfer options, optimize lumber handling and stacking for peak sawmill efficiency.

Reduce Labor Cost

With automation, reduce your dependency on manual labor, leading to substantial cost savings in the long run.

Control System Solutions

We design custom control system upgrades to enhance your existing setup. We can also build panels to your drawings as a trusted panel shop, ensuring precision and reliability every time you go to start your machinery.

‘95 John Deere C6 Tree Farmer

Item ID: 13920

Contact: Austin Ph: (888) 401-6367 x703

Item ID: 14078

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

‘83 John Deere 4850

Item ID: 14073

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great.

Item ID 13644. Sam x702

2010 Shop Built Wood Processor

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

‘05 Gehl CTL 70

Item ID: JW-986495

Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter

-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

Contact: Austin (888) 401-6367 x703

off onto a conveyor. This is a very well built processor. Item ID 13820.

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

capacity!. Item ID 13421. Sam x702

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID

1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

Sam x702

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

Donna Heninger

www.empirehyd.com info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO)

J Williams (888) 401-6367 x701

‘05 Gehl CTL 70

Item ID: JW-986495

‘83 John Deere 4850

Item ID:

Contact: Ph:

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703 EDGERS & GANGS

Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter

automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great.

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

** CALENDAR**

TABLE OF CONTENTS

Since published reaching pallet industrial worldwide.

PUBLISHER

Woods Publishing

ADVERTISING SALES

MID-ATLANTIC LOGGING & BIOMASS EXPO

ATE SMEN'S FIELD D AYS

Fri, 18 August S un, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

SOUTHWEST ST PRODUCTS EXPO

25 August - Sat, 26 August Hot Springs, Arkansas www.arkloggers.com

See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

BANDMILLS

& HEADSAWS

Since 1986, Lumbermens™ has pub lished a month ly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER Woods Publishing

2ND ANNUAL GREAT LAKES GGING & HEAVY EQUIPMENT EXPO

DESIGN DIRECTOR Ted Monnin

Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

AD SUBMISSIONS

May be sent to— morris@lumbermensco.com

POSTMASTER

MAILING ADDRESS 1116 W. 7th St., Ste. 297 • Columbia, TN 38401 (888) 401-6367

MID-ATLANTIC LOGGING & BIOMASS

Fri, 15 Sept - Sat, 16 Sept Selma, North Carolina www.midatlantic-logging-biomassexpo.com/

Send address changes to: Lumbermens™ Magazine 1116 W. 7th St., Ste. 297 • Columbia, TN 38401

Subscription: Lumbermens™, a trade newspaper for the logging, sawmilling, pallet manufacturing, and secondary wood manufacturing industry, is free within the United States to qualifying manufacturers and industry suppliers. Please limit your subscription to one free copy per company or mill location.

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

KENTUCKY WOOD EXPO

Change of Address: Send address changes to: Lumbermens™ Magazine, 1116 W. 7th St., Ste. 297, Columbia, TN 38401. When possible, please include an old address label.

MARKETING DIRECTOR

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

DESIGN DIRECTOR

Donna Heninger

Fri, 15 Sept - Sat, 16 Sept Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

Reproduction & Responsibility: Advertisers are responsible for the contents and claims of their advertising. Lumbermens™ accepts no responsibility for their claims. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or any information storage retrieval system, without permission of Lumbermens™. Negatives, artwork, and other items submitted for publication in Lumbermens™ are the property of advertisers. Lumbermens ™ owns material typeset and/or designed by Lumbermens ™ and reserves the right to its use outside of Lumbermens™. Lumbermens™ will exercise every precaution in writing, designing, and printing material contained within. We shall not be liable for omissions or typographical errors.

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 The published Publishing, Columbia, reserved. submissions discretion be and been content submitted and Exchange, associates, errors in out

THE PAUL BUNYAN SHOW

Fri, 6 Oct - Sun, 8 Oct Cambridge, Ohio www.ohioforest.org

Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. To p Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses. Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702 carriage turners, carriage controls, for

well built processor. Item ID 13820. Sam x702

John Deere

Item ID: 14073

Contact: Austin Ph: (888) 401-6367 x703

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703 EDGERS & GANGS

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702 FIREWOOD PROCESSORS

‘05 Gehl CTL 70

Item ID: JW-986495

Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

Sam x702 motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID

1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great.

LOGGING EQUIPMENT

1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x702 BELL

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

13428 Victory Ln. // PO Box 124 Adams

(DEMO)

Item ID: JW-909632

Contact: J Williams (888) 401-6367 x701 ‘83 John Deere 4850

Item ID: Contact: Ph:

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40

Item ID: 14078

Contact: Austin

Ph: (888) 401-6367 x703

Gehl CTL 70

Item ID: JW-986495

Contact: J Williams Ph: (888) 401-6367 x701 ‘16 Halverson H140 Skidsteer

off onto a conveyor. This is a very well built processor. Item ID 13820. Sam x702

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

motor, Rotobec continuous grapple, 5,000 original hours. on injection pump. always started good. in good working order. 22in 1999 Barko 160D - new engine with meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks. a brand new Duetz engine. Lever control, 33” bar, pump and tranny

** CALENDAR**

BANDSAW BLADES

All Sizes Available!

‘16 Halverson H140

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

640D Skidder

does great job in hardwood. Priced to sell!. Item ID 12206. Sam x702 John Deere 20 hole Sweda wheels - These 50’s are mounted on hard to find 20 hole John Deere sweda rims. Still 50% tread left on these tires. 4 available. Item ID 13852. Sam x702

FABTEK

‘13 KMC 2500 Track Skidder

Item ID: 14078

Contact: Austin Ph: (888) 401-6367 x703

off onto a conveyor. This is a very well built processor. Item ID 13820.

Sam x702

capacity!. Item ID 13421. Sam x702 BARKO

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865. Sam x702

LOGGING EQUIPMENT BANDIT

1977 (est) FMC 220CA Tracked Skidder w/ESCO Swing Boom Grapple - Good running condition. Front blade. Detroit 6V53 engine. No winch....they cannot fit with swing boom grapple. Military style tracks at 70%. Item ID 13227. Sam x702

1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702 1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been

2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

- 23.1 x 26 Tires 50%, Rebuilt Trans.,Good Tight Machine. Item ID 13191. Sam x702

1995 JD 290D with Hytec 4700 Harvester Head - 290D in good condition. Engine just overhauled.

New water

2004 Fabtek 546C ForwarderGood running condition. 30.5 tires in front at 60%. 650 tires in back at 60% and come with tracks. Front blade. JD engine. One owner. Double bunk. Item ID 13363. Sam x702

13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

FMC

1977 (est) FMC 220CA Tracked Skidder - Good running unit. Detroit 6V53 cranks and runs well.

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

2012 Refurbished FMC 210 Tracked Skidder - 1976 Model that has been totally refurbished in 2012. No hours since updates were done. Includes warranty on machine and tracks. Detroit 6V53 engine with 195HP. Clark 28000 Powershift transmission. Clark 40,000 lb Winch. ROPS Cab. Includes bolt on grapple head with full function.

Sam x702

13910. Austin x703 Franklin 170 Skidder - This would be a great starter skidder. It is a single arch with winch. Runs good and pulls good. Detroit 453 turbo and 3 speed power shift transmission. Good center section. There are a few leaks, but nothing major. Item ID 13819. Sam x702 Franklin 3000 - 4BT Cummins engine with approximately 600 hours. Needs tires. Good machine for the money and for a start up company. Item ID 13786. Sam x702 2003 Franklin Q80 Grapple Skidder - 7500 hours, but just 5000 hours on reman engine. New Radiator; New Hydraulic

‘05 Gehl CTL 70

Item ID: JW-986495

Contact: J Williams

‘16 Halverson H140 Skidsteer (DEMO)

Item ID: JW-909632

Contact: J Williams

Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077

Contact: Austin Ph: (888) 401-6367 x703

‘13 KMC 2500 Track Skidder

Item ID: 14078

Contact: Austin

Ph: (888) 401-6367 x703

off onto a conveyor. This is a very well built processor. Item ID 13820. Sam x702

capacity!. Item ID 13421. Sam x702

knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700

Item ID: Contact:

‘83 John Deere 4850

Ph: (888) 401-6367 x701

Ph: (888) 401-6367

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703 EDGERS & GANGS

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

chain conveyer, 8 way splitter, on

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

boom loader, 3 knife disc, Newer discharge chute, New banding around disc, Brakes and tires are also OK, Everything works well Newer clutch -- with outboard bearing, Had Cummins KTTA 750 HP engine -- needs repower. Item ID 12443. Sam x702 1997 Morbark Model 2400 Chipper - Has a Cumins diesel engine and runs great. All fluids and filters have been changed. Item ID 13429. Sam x702

1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

1999 Morbark 1400 Tub GrinderLoader w/Cab; 4200 hours; Very good condition. Located in PA. Item ID 13361. Sam x702

94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x702

2006 Morbark 6600 Horizontal Grinder - Approx. 6000 hours on this well maintained machine. Has New Cat Dealer Rebuild 1000HP Engine at 5000 hours. 42” X 66-5/8” HAMMERMILL; VARIABLE SPEED INFEED SYSTEM; HAMMERMILL DRIVE INCLUDES ALL BELTS, SHEAVES, BUSHINGS &

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

Item ID: Contact: Ph: (888) 401-6367 x703

‘05 Gehl CTL 70 JW-986495 J Williams (888) 401-6367 x701

off onto a conveyor. This is a very well built processor. Item ID 13820.

Sam x702

capacity!. Item ID 13421. Sam x702

KENTUCKY WOOD EXPO

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700

Shop Built Wood Processor Item ID: 13916 Contact: Austin Ph: (888) 401-6367 x703

1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

ADMISSION: $7/Adult, $5 Ages 6- 12, Under 6 Free

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703 EDGERS & GANGS

Sam x702

LOGGING EQUIPMENT BANDIT

Make plans to participate in the 36th Kentucky Wood Expo, the two-day event is designed to accent the forest products industry. The show will attract loggers, sawmill and pallet operators, manufacturers of forest products and related machinery, retailers and wholesalers, and consumers of wood products.

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

1999 Bandit 1900 Tracked Disc

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

Skidder - Very good running condition. Big Capacity Grapple! 9400 hours. Tires at 40%. Totally gone through by TP Dealer who did the following: Repacked and resealed hydraulic cylinders –grapple arch, steering; Replaced hydraulic hoses and lines where needed – fill pump, grapple, etc; Repacked hydraulic fill pump; Replaced exhaust; Replaced center pins; Straightened and painted panels; Changed all fluids and

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x702

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

off onto a conveyor. This is a very well built processor. Item ID 13820.

Sam x702

‘05 Gehl CTL 70

Item ID: JW-986495

Contact: J Williams Ph: (888) 401-6367 x701 ‘83 John Deere 4850

Item ID:

Contact:

Ph:

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

line of

Contact: Austin Ph: (888) 401-6367 x703 ‘88 John Deere 440D Skidder

Brewco Saws - Two Brewco Saws in excellent condition. Runs great.

Item ID 13644. Sam x702

4000 hours. Torque convertor transmission. 14 hole wheels. Tires are 30.5’s at 55% and one at 80%. Center has very little slack. This skidder has been a back up skidder for the several years. Skidder has 12000 hours. Item ID 13805. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

1981 Timberjack 520 - Very hard to come by! 653 Detroit. Runs Great!. Item ID 13741. Sam x702

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

2002 Timberjack 608s with hot saw - Approx. 6000 hours, Machine is

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

Item ID: 13781 Contact: Sam Ph: (888) 401-6367 x702

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700

Best Value Portable Log Splitter

in very good shape and has been well maintained. Item ID 12194. Sam x702

fired combustion systems backed with fifty years of innovative clean-burn design. Diverse in every way with multi-fuel blending capability. Hurst stokers utilize hundreds of common and abundant solid biomass fuels. Large or small scale, project management is eased with the impressively short installation time required with prefabricated

Sam x702

‘98 Timberjack 1270B - 7,300 hrs.

Perkins 6 Cylinder Engine. All modules and computer are brand new. Tires on average are around 80% Video: http://youtu.be/R_ MQZe5QEFw. Item ID 13572. Chris x700

VALMET

-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

1998 Valmet 603 3-Wheeled Buncher - 6500 hours on total machine but no hours on 4BT3.9

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

Sam x702

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

Reman Cummins Engine. Equipped with 18” Waratah High Speed Disc Saw. 28L x 26 Tires at 40% complete with chains. This machine has been extremely well maintained and runs very well. Hard to find them in this good of condition. Has a twin that is available if you need two units. Item ID 12524. Sam x702 2005 Valmet 860.1 8-Wheeled Forwarder - 17,800 hours. New hydraulic transmission and gear box in 2013. $70,000 of updates in 2012. Bogies just resealed. Spare pump ($7,000 value) Good running condition. Sisu engine uses 4 gal/ hour. 16 ton capacity. One set of

Mud Tracks. Front blade. Hood guard. Item ID 12267. Sam x702

1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

2005 Valmet 941 Harvester - Totally refurbished head to toe! Very good running condition. Over $50,000 in recent updates and maintenance. New center pin bushings; new bogey seals; valves resealed; all cylinders packed. 10,200 hours. Largest of rubber tired harvesters. Has Valmet 370.2 processing head with less than 4000 hours. Engine runs well. Tires at 50%. This is a hard to find gem and priced below market. Item ID 12569. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!.

2005 Valmet/Timbco 415 Harvester with 370E Head - 15,400 hours. 370E Harvesting head just added in 2010 and has 7000 hours. 36” Triple Grouser tracks rebuilt one year ago and are at 80%. Sisu engine that is very stingy on fuel. 8’ squirt at end of boom for 30’ reach. Reversible fan and auxiliary oil cooler. Still runs OK. Cutting today but will needs some basic

Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

Trump Orders Forest Service, Interior To Merge Wildland Firefighting Efforts

The Interior Department and the U.S. Forest Service are expected to soon merge their federal wildland firefighting programs, according to an executive order President Donald Trump signed.

Trump's order gave the two agencies 90 days to combine the offices, programs, budgets and other resources of each wildfire management program "to the maximum degree practicable and consistent with applicable law."

The White House said the order is an effort toward a more efficient and effective response to wildland fires, which have been increasing in frequency and severity in recent years.

"In too many cases, including in California, a slow and inadequate response to wildfires is a direct result of reckless mismanagement and lack of preparedness," Trump wrote in the executive order. "The federal government can empower state and local leaders by streamlining federal wildfire capabilities to improve their effectiveness and promoting commonsense, technology enabled local strategies for land management and wildfire response and mitigation."

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

The executive order mirrors the White House's plans for wild fire response as part of the fiscal 2026 budget request

‘16 Halverson H140 Skidsteer (DEMO)

Item ID: JW-909632

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

‘93 Barko 180B

Item ID: 14077

Contact: Austin Ph: (888) 401-6367 x703

- although the budget request takes the effort a step further. The White House proposed a full unification of the federal government's wildfire management programs into a single agency, called the "U.S. Wildland Fire Service," which would fold the Forest Service's current program into a newly created agency within the Interior Department.

Contact: J Williams

Ph: (888) 401-6367 x701

"This integrated, cost-efficient and operationally more effective organization will streamline federal wildfire suppression response, risk mitigation efforts and coordination with non-federal partners to combat the wildfire crisis," the 2026 budget request states.

The International Association of Fire Fighters expressed support for Trump's consolidation efforts.

‘95 John Deere C6

Farmer

‘13 KMC 2500

Track

Skidder

Item ID: 14078

Contact: Austin

Ph: (888) 401-6367 x703

However, some federal wildland firefighters cast doubt that combining the two agencies' resources and staffing would prove more effective. They worried about costs and disruptions to the current setup, especially with wildfire season already underway. The move to a consolidated program would affect the logistics of how, when and where to station wildland firefighters.

ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

off onto a conveyor. This is a very well built processor. Item ID 13820. capacity!. Item ID 13421. Sam x702 BARKO

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous

Combined, the Forest Service and Interior Department employ around 17,000 federal wildland firefighters, including both permanent employees and seasonal workers.

in good working order. 22in 1999

meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

2010 Shop Built Wood Processor -It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

Barko 160D - new engine with

Tough Meets QUALITY

‘13 KMC 2500 Track Skidder

Item ID: Contact:

Ph: (888) 401-6367 x703

off onto a conveyor. This is a very well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

capacity!. Item ID 13421. Sam x702 BARKO

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID

1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

Sam x702

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694.

Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x702

Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33”

** CALENDAR**

1992 TIMBERJACK 240 CABLE SKIDDER Item ID: 7478

Contact: WALKER

Email: Walker@lumbermensco.com

Phone: 888-401-6367 EXT 707

2005 TIGERCAT 240B LANDING LOADER Item ID: 7539

Contact: WALKER

Email: Walker@lumbermensco.com

Phone: 888-401-6367 EXT 707

Contact: WALKER

Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

‘83 John Deere 4850

Item ID: 14073

Contact: Austin Ph: (888) 401-6367 x703

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

Item ID: JW-909632

FRANKLIN 105 FELLER BUNCHER Item ID: 7470

Phone: 888-401-6367 EXT 707 2006 JOHN DEERE 755C CRAWLER LOADER Item ID: 7466 Contact: WALKER

Email: Walker@lumbermensco.com

Phone: 888-401-6367 EXT 707

‘05 Gehl CTL 70

Item ID: Contact: Ph:

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter -Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

Contact: J Williams Ph: (888) 401-6367 x701

Contact: WALKER

Email: Walker@lumbermensco.com

Phone: 888-401-6367 EXT 707

Item ID: 14078

Contact: Austin Ph: (888) 401-6367 x703

off onto a conveyor. This is a very well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

Contact: WALKER

Email: Walker@lumbermensco.com

capacity!. Item ID

Email:

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

13421. Sam x702 BARKO

1995 TIMBCO 425B Item ID: 8030

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

2014 MORBARK NCL

MODEL 23 Item ID: 8024

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Item ID: JW-909632

Contact: J Williams Ph: (888) 401-6367 x701

2011 JOHN DEERE 437D Item ID: 7999

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Item ID: 14078

2015 JOHN DEERE 700K Item ID: 7968

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

2013 PRENTICE 2384 Item ID: 7961

13428 Victory Ln. // PO Box 124 Adams

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘83 John Deere 4850

Item ID: 14073

2017 TIGERCAT 630E Item ID: 7928

Contact: AUSTIN

2015 JOHN DEERE 643K Item ID: 7954

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

TIMBERJACK 240C Item ID: 7948

Contact: Austin Ph: (888) 401-6367 x703

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

off onto a conveyor. This is a very well built processor. Item ID 13820.

Sam x702

‘05 Gehl CTL 70

Item ID: Contact: Ph:

PRENTICE 410 Item ID: 7943

capacity!. Item ID 13421. Sam x702 BARKO

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029 2016 JOHN DEERE 344K WHEEL LOG LOADER Item ID: 7727

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

Contact: AUSTIN

Email: Austin@lumbermensco.com

Contact: Austin Ph: (888) 401-6367 x703

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

BELL ULTRA C FELLER BUNCHER Item ID: 7579

FIREWOOD PROCESSORS

Email: Austin@lumbermensco.com

Contact: AUSTIN

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Email: Austin@lumbermensco.com

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

Contact: AUSTIN

Email: Austin@lumbermensco.com

Best Value Portable Log Splitter

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

PONSEE BUFFALO FORWARDER Item ID: 7575

Sam x702

Phone: 888-401-6367 EXT 703 (C) 931-797-8029 BARKO 275B TRACKED LOADER Item ID: 7660

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

Sam x702

VOLVO L150E WHEEL LOADER WITH LARGE GRAPPLE Item ID: 7532

2010 Shop Built Wood Processor

Contact: AUSTIN

Email: Austin@lumbermensco.com

Contact: AUSTIN

Email: Austin@lumbermensco.com

Contact: SAM

Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

Runs Great!. Item ID 13740. Sam x702 BELL

Contact: WALKER

Email: Walker@lumbermensco.com

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

Phone: 888-401-6367 EXT 707 2023 DIAMOND MILLER STUMP GRINDER Item ID: 7477

‘95 John Deere C6

2001 BELL ULTRA T FELLER BUNCHER Item ID: 6965

JOHN DEERE 540G II CABLE SKIDDER Item ID: 5745

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

SKIDDER Item ID: 5045

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

SKIDDER Item ID: 8076

Contact: JOE

Email: Joe@lumbermensco.com

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

2001 TJ 360 CABLE SKIDDER Item ID: 8136

Contact: JOE

Email: Joe@lumbermensco.com

1997 MODEL MORBARK 1200 TUB GRINDER Item ID: 5573

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

& W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702

888-401-6367 EXT 703 (C) 931-797-8029

SALE

Item ID: 7406

1. Nissan forklift with 4,975 hours has 42″ forks with side shifter

2. Foley below-planer Molder, blades included. 1989 model 804

208 Item ID: 5320

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

3. Optima Scale pallet, Truck with built in scale. MODEL- OP-918W-5K 4. NEW TWB40 Tora Max Electric Walkie MODEL-TWB40. 5. 30″ Oliver Vertical Bandsaw 28″ x 26″ table. MODEL-217-S 6. Classic Fence w/standard rails, MODEL-W2005 7. NEW Custom movable fence for Oliver. 8. Tannewitz 30″ Bandsaw MODEL-PH 9. Kreg Bandsaw Fence

Phone: 888-401-6367 EXT 709 (C) 801-362-2170 Contact: WALKER

MODEL-KMS7200 Carter products guide Assembly 10. Northfield No. 7 Surface Planer, 25″ SKH planer-15HP.DMD,8″ shavings hood with knife grinder/joining attachment; 2 manuals, RE-BUILT, 4-Knife cutterhead Knife set, Dialtype Knife & roll setting gauge 11. Diehl Rip saw with idle conveyor and manual, MODEL-SL52, 1970 PRE-OWNED W/IDLE conveyor & manual wrench 1.75″ open End, MODEL-482-0013 12. Hazel thorn Chop saw

Contact: WALKER

Email: Walker@lumbermensco.com

Phone: 888-401-6367 EXT 707 WOODSHOP EQUIPMENT FOR

Email:

Phone: 888-401-6367 EXT 707

2022 TIMBERPRO 755D

Item ID: 7924

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

2005 JOHN DEERE 548G3 GRAPPLE SKIDDER

Item ID: 7678

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1990 JOHN DEERE 540B CABLE SKIDDER Item ID: 7327

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

‘83 John Deere 4850

Item ID: 14073

Contact: JOE

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

‘05 Gehl CTL 70

Item ID: Contact: Ph:

FRANKLIN 170 GRAPPLE SKIDDER Item ID: 5093

‘16 Halverson H140 Skidsteer (DEMO)

Item ID: JW-909632

Contact: J Williams Ph: (888) 401-6367 x701

2015 JOHN DEERE 648H GRAPPLE SKIDDER Item ID: 7599

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

2004 CAT 525B GRAPPLE SKIDDER

Item ID: 7349

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

‘13 KMC 2500 Track Skidder

Item ID: 14078

Contact: Austin

JOHN DEERE 648H GRAPPLE SKIDDER

Item ID: 7245

Ph: (888) 401-6367 x703

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

off onto a conveyor. This is a very well built processor. Item ID 13820.

Sam x702

2007 CAT 525C GRAPPLE SKIDDER Item ID: 6927

capacity!. Item ID 13421. Sam x702 BARKO

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Contact: Austin Ph: (888) 401-6367 x703

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Phone: 888-401-6367 EXT 709 (C) 801-362-2170 98′ JOHN DEERE 648G GRAPPLE SKIDDER Item ID: 4510

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

Contact: JOE

Email: Joe@lumbermensco.com

Best Value Portable Log Splitter

-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

H67 GRAPPLE SKIDDER Item ID: 4122

Contact: JOE

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Email: Joe@lumbermensco.com

Sam x702

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

JOHN DEERE 748H Item ID: 8038

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

1993 JOHN DEERE 540E Item ID: 8107

FIREWOOD PROCESSORS

Contact: AUSTIN

2010 Shop Built Wood Processor

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

1997 CAT 515 Item ID: 8045

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

‘95 John Deere C6

1996 TIMBERJACK 380C Item ID: 4825

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1997 TIMBERJACK 360C GRAPPLE SKIDDER Item ID: 7080

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

90′ TIMBERJACK 240A Item ID: 5082

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

JOHN DEERE 440C’S PACKAGE

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

FMC 210 Item ID: 5526

Contact: AUSTIN

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

JOHN DEERE 640C Item ID: 5582

Contact: AUSTIN

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029

FRANKLIN 170 SKIDDER Item ID: 3517

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

2001 CAT 517 SWING BOOM TRACK SKIDDER Item ID: 7286

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

JOHN DEERE 440C Item ID: 5242

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1999 JOHN DEERE 640G CABLE SKIDDER Item ID: 7314

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

PRENTICE 210B Item ID: 5085

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

Contact: AUSTIN

Email: Austin@lumbermensco.com

BELL SUPER T CUTTER Item ID: 4952

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘83 John Deere 4850

Item ID: 14073

TIMBERJACK 1270 Item ID: 5199

Contact: Austin Ph: (888) 401-6367 x703

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

‘16 Halverson H140

Item ID: JW-909632

2022 TIGERCAT 620H Item ID: 5334

Contact: J Williams Ph: (888) 401-6367 x701

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

KMC 2500 Track

Item ID: 14078

Contact: Austin Ph: (888) 401-6367 x703

Contact: AUSTIN

Item ID: 5368

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Email: Austin@lumbermensco.com

‘05 Gehl CTL 70

Item ID: Contact: Ph:

2016 TAJFUN 400 JOY Item ID: 5227

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029 13′ BARKO 595ML MAGNUM Item ID: 4974

off onto a conveyor. This is a very well built processor. Item ID 13820.

Sam x702

capacity!. Item ID 13421. Sam x702 BARKO

Contact: AUSTIN

Phone: 888-401-6367 EXT 703 (C) 931-797-8029 643J Item ID: 4907 TIMBERJACK 1010 Item ID: 5358

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours.

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Contact: AUSTIN

Email: Austin@lumbermensco.com

1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

Contact: AUSTIN

Email: Austin@lumbermensco.com

Best Value Portable Log Splitter

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

Sam x702

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

Phone: 888-401-6367 EXT 703 (C) 931-797-8029 CAT 538 Item ID: 5302

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

FIREWOOD PROCESSORS

04′ TIGERCAT 620 Item ID: 4705

18′ JOHN DEERE 753J Item ID: 4968

2010 Shop Built Wood Processor

Contact: AUSTIN

Email: Austin@lumbermensco.com

Contact: AUSTIN

Email: Austin@lumbermensco.com

Contact: AUSTIN

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x702 BELL

TIMBCO 445EXL Item ID: 5293

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029 CAT D5H TSK Item ID: 4939

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

‘95 John Deere C6

Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

16′ JD 700K Item ID: 4343

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

2009 JOHN DEERE 540G3 CABLE SKIDDER Item ID: 7299

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Item ID: 1067 2009 JOHN DEERE 548G3 Item ID: 4699

725B TIMBERPRO Item ID: 1398

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

2012 CAT 525C GRAPPLE SKIDDER Item ID: 7552

Contact: WALKER

Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

JOHN DEERE 748H Item ID: 2707

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: ROBERT Phone: 606-875-4783

2019 JOHN DEERE 648L2 GRAPPLE SKIDDER Item ID: 7308

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

JOHN DEERE 648D Item ID: 547

Contact: SAM

Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

JD 450H Item ID: 4327

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

Contact: AUSTIN

Email: Austin@lumbermensco.com

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Phone: 888-401-6367 EXT 703 (C) 931-797-8029 2015 INTERNATIONAL 5100

‘83 John Deere 4850

Item ID: 14073

PICKER TRUCK Item ID: 7070

Contact: AUSTIN

Contact: Austin Ph: (888) 401-6367 x703

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

‘05 Gehl CTL 70

Item ID: Contact: Ph: (888) 401-6367 x701

24C SAWHEAD Item ID: 7065

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Best Value Portable Log Splitter

-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

‘16 Halverson H140

Item ID: JW-909632

Contact: J Williams Ph: (888) 401-6367 x701

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: JOE

Email: Joe@lumbermensco.com

‘13 KMC 2500 Track

Item ID: 14078

Contact: Austin Ph: (888) 401-6367 x703

Contact:

off onto a conveyor. This is a very well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Email: Austin@lumbermensco.com

Sam x702

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

Contact: JOE

Email: Joe@lumbermensco.com

‘95 John Deere C6

capacity!. Item ID 13421. Sam x702 BARKO

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours.

1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

Contact: JOE

Phone: 888-401-6367 EXT 709 (C) 801-362-2170 02′ CASE 650H Item ID: 3511 Contact:

Phone: 888-401-6367 EXT 709 (C) 801-362-2170 JD 550G LT Item ID: 3686

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

Phone: 888-401-6367 EXT 709 (C) 801-362-2170 14' JD 650K LGP Item ID: 3574

Email: Joe@lumbermensco.com

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

Runs Great!. Item ID 13740. Sam x702 BELL

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

CAT D6K2 Item ID: 1488

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

2004 JOHN DEERE 648G3 Item ID: 2628

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

888-401-6367 EXT 709 (C) 801-362-2170 13′ JD 648H Item ID: 3589

00′ JD 748G III Item ID: 3210

Contact: JOE

Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Contact: JOE

Phone: 888-401-6367 EXT 709 (C) 801-362-2170 TJ 460D Item ID: 3286

Contact: JOE

Email: Joe@lumbermensco.com

12' JD 550K LGP Item ID: 3753

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Phone: 888-401-6367 EXT 709 (C) 801-362-2170 06′ TIGERCAT 635C Item ID: 3322

Contact: AUSTIN

Email: Joe@lumbermensco.com

JOHN DEERE 848H Item ID: 2646

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

CAT 525D Item ID: 3172

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Phone: 888-401-6367 EXT 703 (C) 931-797-8029 04′ TIMBERJACK 460D Item ID: 2724

98′ JOHN DEERE 648 Item ID: 2798

Contact: AUSTIN

Email: Austin@lumbermensco.com

04′ JOHN DEERE 648G3 Item ID: 2791

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

F666 RANGER Item ID: 3233

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170 02′ TJ 660D Item ID: 4088

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029 12′ TIGERCAT 620D Item ID: 2753

83′ TJ 380A Item ID: 2133

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

13′ CAT 545C Item ID: 2117

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Contact: AUSTIN

Phone: 888-401-6367 EXT 703 (C) 931-797-8029 CAT 515 Item ID: 1739

Contact: JOE

Email: Austin@lumbermensco.com

‘83 John Deere 4850

05′ VALMET 415 EX TRACK

Item ID: 14073

FELLER BUNCHER Item ID: 8144

Contact: JOE

Email: Joe@lumbermensco.com

Contact: Austin Ph: (888) 401-6367 x703

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

15′ CATERPILLAR 553C

FELLER BUNCHER

Item ID: 5495

FIREWOOD PROCESSORS

Item ID: Contact: Ph: ‘16

Halverson H140

Item ID: JW-909632

Contact: J Williams Ph: (888) 401-6367 x701

Contact: JOE

Phone: 888-401-6367 EXT 709 (C) 801-362-2170 08′ JD 535 SERIES II Item ID: 4580

10′ JOHN DEERE 648H Item ID: 1847

Contact: AUSTIN

Email: Joe@lumbermensco.com

Item ID: 14078

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Phone: 888-401-6367 EXT 709 (C) 801-362-2170 17′ JD 437E Item ID: 4809

TIMBERJACK 240A GRAPPLE SKIDDER Item ID: 1769

Contact: Austin Ph: (888) 401-6367 x703

Contact: AUSTIN

Email: Joe@lumbermensco.com

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

off onto a conveyor. This is a very well built processor. Item ID 13820.

Sam x702

‘05 Gehl CTL 70

Contact: AUSTIN

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

Email: Austin@lumbermensco.com

Best Value Portable Log Splitter

Phone: 888-401-6367 EXT 703 (C) 931-797-8029 15′ TIGERCAT 724 G Item ID: 3392

-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

TIGERCAT 630E Item ID: 1098

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

TIMBERJACK 460 Item ID: 1777

Contact: AUSTIN

Email: Austin@lumbermensco.com

Sam x702

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

2019 KOMATSU XT445 L-5 TRACK FELLER BUNCHER Item ID: 7243

capacity!. Item ID 13421. Sam

08′ JD 843J Item ID: 2109

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029 17′ JOHN DEERE 843L Item ID: 2731

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702 1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

Contact: JOE

2010 Shop Built Wood Processor

Email: Joe@lumbermensco.com

Contact: AUSTIN

Email: Austin@lumbermensco.com

Contact: AUSTIN

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

Runs Great!. Item ID 13740. Sam x702

16′ COOKS AE4P EDGER Item ID: 5013

BELL

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

x702 BARKO

‘95 John Deere C6

PRENTICE

Item ID: 2166

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170 84' CAT 518 ROTOSAW CUTTER

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN

Phone: 888-401-6367 EXT 703 (C) 931-797-8029 KOBELCO 250 LOG LOADER Item ID: 2584

Contact: JOE

Email: Austin@lumbermensco.com

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

TIMBCO 415EX Item ID: 1661

Contact: AUSTIN

1/2" or 2"

22ft.

Email: Austin@lumbermensco.com

Set

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Phone: 888-401-6367 EXT 703 (C) 931-797-8029 2014 PONSSE SCORPION KING Item ID: 4914

Contact: AUSTIN

Email: Austin@lumbermensco.com

ID: 741

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029 VALMET 644 Item ID: 1480

Contact: SAM

Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702 CARRIAGES & DRIVES carriage turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls, cabinet with electronic drives for carriage knees, husk including

Item ID: 1246

Contact: SAM

Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

JOHN DEERE 548G

SKIDDER Item ID: 8062

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

Victory Ln. // PO Box 124 Adams

‘83 John Deere 4850

Item ID: 14073

Contact: Austin Ph: (888) 401-6367 x703

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703 EDGERS & GANGS

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

‘05 Gehl CTL 70

Item ID: JW-986495

Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter

-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

‘16 Halverson H140

Item ID: JW-909632

Contact: J Williams Ph: (888) 401-6367 x701

‘13 KMC 2500 Track Skidder

Item ID: 14078

Contact: Austin Ph: (888) 401-6367 x703

off onto a conveyor. This is a very well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

capacity!. Item ID 13421. Sam x702 BARKO

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700 1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great.

LOGGING EQUIPMENT

1999 Bandit 1900 Tracked Disc

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

94 Barko 275 - Excellent value with low at hours at 3,500. 5.9 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029 2024 HUDSON SAWYER SAWMILL Item ID: 6881

Contact: AUSTIN

Email: Austin@lumbermensco.com

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

SIZER Item ID: 1322

Contact: SAM

Email: Sam@lumbermensco.com

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Phone: 888-401-6367 EXT 703 (C) 931-797-8029 Contact: AUSTIN

931-797-8029

MORGAN MILITARY

BAND SAW Item ID: 3567

Contact: JOE

Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Phone: 888-401-6367 EXT 702 (C) 615-596-4148

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough wheel sides. This machine 130 presses. S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702 CARRIAGES & DRIVES carriage turners, carriage

Contact: AUSTIN

Email:

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

2021 WOODMIZER LT-70 SUPER WIDE Item ID: 7938

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: AUSTIN

7710

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘16 Halverson H140 Skidsteer (DEMO)

Item ID: JW-909632

Contact: J Williams Ph: (888) 401-6367 x701

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Contact: Austin Ph: (888) 401-6367 x703

Item ID: 7553

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘13 KMC 2500 Track Skidder

Item ID: 14078

SAWMILL Item ID: 7545

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘83 John Deere 4850

Item ID: 14073

Contact: Austin

Contact: SAM

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

‘05 Gehl CTL 70

Contact: Austin Ph: (888) 401-6367 x703

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

off onto a conveyor. This is a very well built processor. Item ID 13820.

Sam x702

Item ID: 5007

capacity!. Item ID 13421. Sam x702 BARKO

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

Item ID: Contact: Ph:

WITH HOOD LOADER Item ID: 1089

Ph: (888) 401-6367 x703

Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 (C) 615-596-4148 CSI 4400 SLASHER Item ID: 6786

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702 FIREWOOD PROCESSORS

NYLE FIREWOOD DRY KILN Item ID: 3588

chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 (C) 615-596-4148

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Best Value Portable Log Splitter

-Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA. Item ID 12062. Sam x702

Sam x702

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

2010 Shop Built Wood Processor

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

Firewood Processor - This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks

Phone: 888-401-6367 EXT 709 (C) 801-362-2170

Contact: AUSTIN

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (C) 931-797-8029 WINCH FOR SALE Item ID: 5413 Contact: JOE Email: Joe@lumbermensco.com

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700 1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

BLOCK SAW Item ID: 5342

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Runs Great!. Item ID 13740. Sam x702

Item ID: 1051

Contact: AUSTIN

Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 (C) 931-797-8029

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

Email: Austin@lumbermensco.com

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

Phone: 888-401-6367 EXT 703 (C) 931-797-8029 LOG MAX 7000

with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

Brewco Saws - Two Brewco Saws in excellent condition. Runs great. Item ID 13644. Sam x702

2010 Shop Built Wood Processor

-It has a 353 Detroit diesel, 40 inch insert tooth circle saw, 30 foot

Value! PA. Item ID 12062.

AD DIRECTORY

‘16 Halverson H140 Skidsteer (DEMO)

Item ID: JW-909632

Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077

Contact: Austin Ph: (888) 401-6367 x703

‘13 KMC 2500 Track Skidder

Item ID: 14078

Contact: Austin Ph: (888) 401-6367 x703

off onto a conveyor. This is a very well built processor. Item ID 13820.

Sam x702

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. Item ID 13865.

Sam x702

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins Diesel. 7500 Hours. One owner. Well maintained. Item ID 13294.

Sam x702

2004 Bandit Beast Model 46803412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finished 10 Acre clearing job, ready to work! Remote control. Big production

‘95 John Deere C6 Tree Farmer

Item ID: 13920

Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702 BARKO

1994 Barko 160B - Electric knuckleboom, 30' boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher -Pumps recently redone. 400 hrs on injection pump. always started good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour meter dont work. The last 2 owners have only used it to load trucks or as a backup as needed. Has a CTR delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value with low at hours at 3,500. 5.9

CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam x702 BELL

1990 Bell Super T - This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny

20,000lb goose neck trailer. Item ID

Sam x702