Page 1

F R E E

E Q U I P M E N T

L I S T I N G S

TM


“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘93 Barko 180B

‘16 Halverson H140 Skidsteer (DEMO)

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

Grapple Assist for crooked logs

2019 Cord King Line-up

Email: info@cordking.ca Web: www.cordking.ca

‘95 John Deere C6 Tree Farmer

Item ID: 13920 TOLL FREE 1-888-219-WOOD Contact: Austin ‘13 KMC 2500 Track (9663)

Ph: (888) 401-6367 x703

Skidder

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

well built processor. Item ID 13820. Sam x702

Firewood Processor - This is a Chomper Model 16 PDA

‘05 Gehl CTL 70Wedge and automatice firewood processor • splitter

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

Item ID: JW-986495 John Deere power unit with design towith suit your Contact: J Williams low hours. Control panel includes needs Ph: (888) 401-6367 x701

tach, oil pressure, water temp and 24 to 72 ton splitting amp gauges. Cuts logs up to 16”. capability chain conveyer, 8 way Onesplitting owner and comes with all • splitter, The on fastest 20,000lb goose neck trailer. Item ID manuals and receipts. Purchased cycle time on the 13916. Austin x703 planet. new for $32,500. Item ID 13865.

Best Value Portable Log Splitter

Sam x702

Facts to consider:

- Small manufacturer in PA has

made the best valued log splitter.

LOGGING EQUIPMENT BANDIT

quality chips with patented ‘Cone’ Handles logs first up to 32”. Uses 1999 Bandit 1900 Tracked Disc 1. Pioneered N. America’s commercial firewood processor drum design. Can easily load 42’

13HP Honda motor. Manual start

Chipper - Cat Under Carriage at

day. Item ID 13882. Austin x703

Has Log Lift. Uses 4-way wedge

Diesel. 7500 Hours. One owner.

Brewco Saws - Two Brewco Saws

Value! PA. Item ID 12062. Sam x702

Sam x702

3 Bar models M1820, vans and2. produce 6 - 8saw loads per but available electronic option is available.M2030 50% orand better.M2430 475 hp Cummins

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt. in the mid 70’s Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

3. 7 Slasher Model 40, 44, 44HO, 48, 54 with & 60 low at hours at 3,500. 5.9 EDGERS & GANGS Saw Models adjustable Available to single two way. Great 36, Well maintained. Item ID 13294.

CUMMINS continuous grapple.

4. The Most productive machine on the planet, proven and guaranteed

in excellent condition. Runs great.

Firewood Processor - This is a

2004 Bandit Beast Model 4680 -

Runs Great!. Item ID 13740. Sam

x702 3412 Caterpillar engine homemade processor with a video 10’ web site for live action and detailsDiesel www.cordking.ca FIREWOOD PROCESSORS BELL with 850 HP. 5300 hrs. Mill in log deck. Has a hydraulic grapple, 6. Available with single joystick control 2010 Shop Built Wood Processor 1990 Bell Super T - This Bell has chain and kicker that all runs off good condition. Just finished 10 Item ID 13644. Samto x702 5. Go our

- It has a 353 Detroit diesel, 40

of a 4 cylinder Mercedes power

Acre clearing job, ready to work!

a brand new Duetz engine. Lever

7. Exclusive lifetime splitter warranty and Remote 1 year bumper to bumper warranty. inch insert tooth circle saw, 30 foot control, 33” bar, pump and tranny control. Big production unit. Has a 4’ chain saw that kicks  Issue 364 386

Lumbermens™  since 1986

 List  seLL  exchange  buy  save

 LumbermensCO.com


** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

** INFO LINK**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses. Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark .....................................9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler .............................14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 3


“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

‘95 John Deere C6 Tree Farmer ‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

well built processor. Item ID 13820. Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 386

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865. Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

 LumbermensCO.com


PleAse PrINt

blades and 1 spare 36" blade),

❑ Please Remove

** CALENDAR**

where to order included. Item ID 12846. Sam x702

Zip

cuts from sawline, log stop and

loader to drop logs onto carriage,

Precision 58 Chip Pac - Single chute

stop and loader to deal with big

Sam x702

heavy duty log turner under log

loading system,. Item ID 12764.

logs onto carriage and track and

State

frame. Significant new spare parts

to be negotiated separately. Item ID

Email

TM

FOR CLASSIFIEDS CHIPPERS Call 888.401.MENS LIST SELL EXCHANGE BUY SAVE EST 1986 See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Location of all equipment at of Boonville, New York www.LumberMB\ISmagazine.com DealS the Month belted rollcase to clear slabs and

13198. Sam x702

Manual Four Head Block - Manual www.starwebhosting.net/woodsmen/

From TA ApriL BLE

DEPARTMENTS The Tree that Started it All!

Trelan Chipper - This is a remote

chipper that has been totally rebuilt with about 840 hours except for the V-12 Caterpillar power unit. New

OF C O N T E NBANDMILLS T S & HEADSAWS FOREST PRODUCTS EXPO Four Head Block Mounted on

all steel carriage. Husk. Manual

clutches, disc, bearing, liners and

custom chute. 23” in opening and V-12 Cat with 750-800 hp rating.

'12 WoodmIzer LT 40 SOUTHWEST

City

❑ Please Change

Pulleys on Bearing . Parts Book and

short pop-up transfer to edger,

Danckaert Band Resaw - Roughly

Fri, 25 August - Sat, 26 August

EquipmEnt REpREsEntativEs

EST on this 1986 10 hours machine since it Hot Springs, Arkansas cAll uS todAy foR All youR uSed www.arkloggers.com equiPMent hasneedS! been rebuilt, it has a 24foot in

Free Listings................................6 Company Name*

❑ Please add

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

feed deck 20 foot out feed deck 72ND ANNUAL GREAT LAKES fREE EquipmEnt listings! Call –E L I S T with S E L44 L inch E X C Hwheels, ANGE B and UY S A Vthe all LOGGING & HEAVY EQUIPMENT EXPO 401-6367 (888) Thurs, 7 Sept - Sat, 9 Sept bells and whistles, its a production

Escanaba, BUY SMichigan AVE

Phone

Address

Individual Name

Deals of the Month..................18 EST 1986 MID-ATLANTIC LOGGING & BIOMASS LIST

SELL

EXCHANGE

Morris Woods

item id: 14061 contact: Austin x703

2012 JoHn deere 548G3 Fri,

AD Sales

401-6367 15 Sept - Sat,(888) 16 Sept

Selma, North CarolinaExt. 704 Ad Directory..............................38 www.midatlantic-logging-biomass­ PUBLISHER

*Company name and address required to process your change.

If you need to Change your Address or Add Your Name to our mailing list, then please complete this form and mail to:

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MARKETING DIRECTOR

expo.com/

chris Woods Phone: (888) 401-6367 ext. 700 chris@lumbermens.co

Mark Laxton Lexington, Kentucky http://www.kfia.org/ (888) 401-6367 KentuckyWoodExpo.aspx Ext. 708

FAbTeK 344b

THE PAULmark@lumbermensco.com BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR

SUBSCRIPTION: Lumbermens™, a trade newspaper for the logging, sawmilling, pallet Donna Heninger manufacturing, and secondary wood manufacturing industry, is free within the United States item id: 14061 to qualifying manufacturers and industry suppliers. Please limit your subscription tox701 one free contact: J Williams EQUIPMENT REPS copy per company or mill location.

Sam Wall For classifieds CHANGE OF ADDRESS: Send address changes to Lumbermens™ Magazine, P.O. Box 1916, (888) 401-6367 ext. 702 Columbia, TN 38402. When possible, please include an old address label. Call toDay sam@lumbermens.co

(888) 401-6367 REPRODUCTION AND RESPONSIBILITY: Advertisers are responsible for the contents and claims of their advertising. Austin Woods Lumbermens™ accepts no responsibility for their claims. No  Issue lumbermenS  Since 1986 in ❘ any form  liSt  Sell part of this364 publication may be 703 reproduced or transmitted or by any means,  (888) 401-6367 ext. electronic or mechanical, including photocopying, recording or any information storage austin@lumbermens.co retrieval system, without permission of Lumbermens™. Negatives, artwork, and other items submitted for publication in Lumbermens™ are the property of advertiserQs. Lumbermens ™ MAILING ADDRESS owns material typeset and/or designed by Lumbermens ™ and reserves the right to its use B & B Mfg. ............................... 18 P.O. Box 1916 outside of Lumbermens™. Lumbermens™ will exercise every precaution in writing, designing, Columbia, TN 38402-1916 and printing material contained within. We shall not be liable for omissions or typographical B. H. Payne .............................. 16 errors. (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402 The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

Cambridge, Ohio www.ohioforest.org

Austin Woods Phone: (888) 401-6367 ext. 703 austin@lumbermens.co

Walker Woods

** INFO LINK**

(888) 401-6367

exchange  buY  Save

Chris Woods

that go up and down, with airbags, it(888) includes401-6367 two sets of Mcdonough

pressure guides. Top Casting wheel Ext. 700 ischris@lumbermensco.com supported on both sides. This

is an extremely accurate machine Morris Woods, Ad Sales Phone: (888) 401-6367 in ve1y good condition, Cuts 130 ext. 704

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

Reduced PRice item id: 14021 contact: Sam x702

P.O. Box 1916 Columbia, TN 38402

Lumbermens Magazine

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

morris@lumbermensco.com

MID-ATLANTIC

LOGGING & BIOMASS EXPO

machine, with air strain conveyers

Ext. 707

walker@lumbermensco.com

M&F Gauge ............................. 28 Meadows Mill, Inc. ................ 33

morris@lumbermens.co feet a minute also has CLT presses.

Austin Woods Item ID 13876. Austin x703 S (888) & W 125401-6367 Band Mill with

Caterpillar generator - Low hours Ext. 703

on the mill, electronic computer Set austin@lumbermensco.com

works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam Wall

Phone: (888) 401-6367 Sam Joex702 Ferrazzano ext. 702

CARRIAGES & DRIVES (888) 401-6367

sam@lumbermens.co

2010 Cardinal HD Carriage

 lumbermenSmagazine.com

Ext. 709

Carriages (Sawmill) - Cardinal joe@lumbermensco.com

Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage,

Baker ...................................... 5, 7

Menominee Saw ..................... 29

Bell's Machining ..................... 27

The Tree Brute Force Mfg. ..................... 31 that Buck Equipment (AIM) ........ 36 Started 32 Corley Mfg .............................. CRD Metalworks .................... it All! 25

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Midwest Sharpening.............. 26

carriage knees, husk including

Since 1986, Lumbermens™ CW Mill-ArmorHog ..............has 17 published a monthly circular reaching sawmills, loggers, pallet makers, CW Mill-Hogzilla ................... 15 recyclers and industrial woodworking plants Dynaworldwide. Products ........................ 35

Rotochopper............................ 40

Empire Woods Hydraulics ................... 8 Publishing

Select Sawmill ......................... 19

DESIGN DIRECTOR Great Lakes Mfg . .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3 MAILING ADDRESS

The Paul Bunyan Show ......... 39

PUBLISHER

Ted Monnin

P.O. Box 1916 • Columbia, TN 38402 (888) 401-6367 Hurst Boiler .............................14 AD SUBMISSIONS Iron BullMay ................................... 21 be sent to— morris@lumbermensco.com

Kilgore Saw ............................. 22 POSTMASTER

Send address changes to: 24 Lignomat .................................

Lumbermens™ Magazine P.O. Box 1916 • Columbia, TN 38402

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Ted Schultz

(888) 401-6367 Ext. 701

Morbark .....................................9

teds@lumbermensco.com

Multitek ................................... 12

Piper's Saw Shop.................... 13

Will

Row Electric ............................ 20

Keene

Sawmill Exchange .................. 11

(661) 900-7726

Will@lumbermensco.com

Call US Today for ALL your Universal Refiner ................... 23 Equipment Needs! WoodMizer ................................ l Thomas Industrial Controls..... 10

Union Grove Saw & Knife.. 2, 37

 SELL YOUR EQUIPMENT TODAY TODAY l§

 24/7 SUPPORT 0 SUPPORT

sawyers cab, computer controls, Sam Wall

(888) 401-6367 Ext. 702

48" bottom saw and 36" top saw sam@lumbermensco.com

STACKING RAC

Fernanda

McDermott

(801) 699-8784

fery@lumbermensco.com

Wes Graber (888) 401-6367 Ext. 710

www.BakerProducts.net

Wes@lumbermensco.com 800.S48.6914 I S73.663.7711

❘ L!  (888) 401-MENS 401-MENS

NO. 5


“Precision Under Pressure”

TM

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO)

‘93 Barko 180B Item ID: 14077

FREE EQUIPMENT LISTINGS, CALL (888) Contact: 401-MENS Austin BANDMILLS & HEADSAWS

condition, Cuts 130 feet a minute CARRIAGES & DRIVES also has CLT presses. 2010 CARDINAL HD Item ID 13876. Austin x703 CARRIAGE CARRIAGES

DANCKAERT BAND RESAW Roughly 10 hours on this CARRIAGES & DRIVES machine since it has been Cardinal Carriage line it includes 2010 rebuilt, it has a 24 foot in feed carriage withCARDINAL onboard logHD turners, CARRIAGE deck 20 foot out feed deck with carriage drive, CARRIAGES hyd pac for Cardinal Carriage includes 44 inch wheels, and all the bells carriage, sawyers line cab, itcomputer carriage with onboard log and whistles, its aa production production controls, cabinet with electronic turners, carriage drive, hyd machine, machine, withwith air strain airconveyers strain drives for carriage knees, husk pac for carriage, sawyers conveyers that go up thatand go updown, and down, with including 48” bottom saw andcab, 36” computer controls, cabinet with with airbags, airbags, it includes it includes two setstwo of top saw, short pop-up transfer electronic drives for carriage sets Mcdonough of Mcdonough pressure guides. pressure Top to edger, belted rollcase to clear knees, husk including guides. Casting Top wheelCasting is supported wheel on is slabs and cuts from sawline, 48” log bottom and 36” logs top onto saw, supported both sides. on This both is an sides. extremely This is stop and saw loader to drop short pop-up to edger, an accurate extremely machine accurate in very machine good carriage, heavytransfer duty log turner in very good condition, Cuts under log stop and loader to deal Victory Ln. POCLT Box 124 130 13428 feet a minute also//has with big logs onto carriage and Adams Center, NY 13606 presses. track and frame. Item ID 13876. Austin x703 Item ID 13198. Sam x702

Item ID: JW-909632 belted rollcase to clear slabs CHIPPERS Contact: J Williams andPRECISION cuts from sawline, log stop 58 CHIP PAC Ph: (888) 401-6367 x701 and loader to drop logs onto Single chute loading system. carriage, duty logx702 turner Item IDheavy 12764. Sam under log stop and loader to COMPLETE SAWMILLS deal with big logs onto carriage 2006 WOODMIZER and track and frame. LT300 ThisItem mill ID is currently running, 13198. Sam x702and includes the sawmill, and cab. CHIPPERS An incline conveyers, a transfer PRECISION CHIPofPAC table and two58sets roller Single chute loading system. tables. This mill saws a million Itemfeet ID 12764. Sam board or more ofx702 walnut COMPLETE SAWMILLS every year. Max log Track diameter ‘13 KMC 2500 2006 WOODMIZER LT300 36in, Max Width of cut 25in, Skidder This mill isofcurrently The width the band running, is 1 1/2 Item ID: 14078 Inches. Video of it operating is Contact:and Austin available, can be sent upon Ph: (888) 401-6367 x703 request. Item ID 13892. Austin x703

If you recognize this…

off onto a conveyor. This is a very

well built processor. Item ID 13820. Sam x702

a Chomper Model 16 PDA

(excellent condition.). Item ID DYNAMIC CHIPPERS 13238. Chris x700 2004 JCB 441 WHEEL LOADER

with John Deere power unit with

works redone. as it should. I have -everything Pumps recently 400 hrs

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter

you need one of these. - Small manufacturer in PA has

made the best valued log splitter.

automatice firewood processor

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865. Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start

1500 Model

Chipper - Cat Under Carriage at

Diesel. 7500 Hours. One owner. Has Log Lift.get Uses 4-way Don’t just fix it again, the wedge permanent solution!

day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

adjustable to single two way. Great

Well maintained. Item ID 13294.

Firewood Processor - This is a

2004 Bandit Beast Model 4680 -

Value! PA. Item ID 12062. Sam x702 homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off

www.prolenc.com of a 4 cylinder Mercedes power

- It has a 353 Detroit diesel, 40

250.563.8899 inch insertCall tooth877.563.8899 circle saw, 30 foot or unit. Has a 4’ chain saw that kicks  Issue 364 386 384

Lumbermens™  since 1986

Ph: (888) 401-6367 x703 and includes sawmill, and DRYthe KILNS cab. An MEC incline conveyers, a 12 X 38 transfer table and two sets TRIPLE PASS DRUM DRYER of rollerwith tables. This mill drum saws Comes trunnions, a million board feet or more drive, fan and cyclone. ofItem walnut every year. log ID 13925. AustinMax x703 diameter 36in, Max Width of cut 25in, MECThe 12 Xwidth 42 of the band is 1 1/2 Inches. TRIPLE PASS DRUM Video DRYERof ‘95 John Deere C6and it operating is available, 12 x 42 Mec triple pass Drum can be sent upon request. Tree Farmer Dryer, comes with trunnions. Item ID 13892. Austin Austin x703 x703 Item ID Item ID:13924. 13920 DRY KILNS DYNAMIC CHIPPERS Contact: Austin MEC 12 X 38x703 Ph: (888) 401-6367 2004 JCB 441 WHEEL LOADER TRIPLE PASS DRUM 3,509 hours on this DRYER machine, Comes with everything workstrunnions, as it should. Idrum have drive,videos fan and cyclone. many available of it running, capacity!. Item ID 13421. Sam x702 Item Austin x703 and can ID be 13925. sent upon request. BARKO Item ID 13888. Austin x703 X 42 1994 BarkoMEC 160B 12 - Electric TRIPLE PASS DRUM DRYER knuckleboom, 30' boom, 75hp 12 x 42 Mec triple pass Drum motor, Rotobec continuous Dryer, comes with trunnions. grapple, 5,000 original hours. Item ID 13924. Austin x703

Sam x702

3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

3,509Barko hours thisBuncher machine, 1995 775 BonFeller

many videos available of it running, and can be sent upon request. good. in good working order. 22in Item ID 13888. Austin x703 on injection pump. always started kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

 LumbermensCO.com


** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

UNIVERSAL REFINER NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

C

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

O

R

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

P

O

T

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

A

Escanaba, Michigan

PUBLISHER

ADVERTISING SALES

R

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

MID-ATLANTIC

LOGGING & BIOMASS EXPO

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

BANDMILLS & HEADSAWS

Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in

I

O

N

feed deck 20 foot out feed deck

with 44 inch wheels, and all the

bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses. Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours

on the mill, electronic computer Set THE PAUL BUNYAN SHOW works,1 1/2" or 2" band, 22ft. track OctR-MAG - Sun, 8isOct The H.A.W.G. is unbelievably simple, durable and fast, yet it will Fri, 6The a portable wood waste grinder that can be used

DESIGN DIRECTOR Donna Heninger

EQUIPMENT grind almost anythingREPS and make a finished product in just one Sam Wall pass...even pulp chips. ideal for grinding: Asphalt, Shingles, (888) 401-6367 ext.Is702 Construction Waste, Green Waste, Stumps, Difficult/Dirty sam@lumbermens.co Material, Tropical Waste (Palm & Palmetto), etc. Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

Cat 3406 140KW Genset, 12,400 Cambridge, Ohio in many areas of recycling. They can easily and safely grind www.ohioforest.org hours ready to run. Item ID 13434. lawn clippings, leaves, land clearing, construction/demolition

Sam x702 waste logging slash, stumps, log yard waste, railroad ties, CARRIAGES & DRIVES storm waste, tropical (palm and palmetto) waste etc.

** INFO LINK**

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal

800-277-8068 MAILING ADDRESS

Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark .....................................9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler .............................14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

UNIVERSAL REFINER STACKING RAC

The BEST Industrial Grinders/Shredders on the Planet for over 35 years. www.BakerProducts.net 800.S48.6914 I S73.663.7711

P.O. BOX 151 • MONTESANO, WA 98563

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

 24/7 SUPPORT 0 SUPPORT

❘ L!  (888) 401-MENS 401-MENS

NO. 7


40

used

or a

02

00

t

02

r

y

wer

w

ill

2008 DYNAMIC 585 CHIPPER Phone FIREWOOD PROCESSOR This is a 2008 dynamic cone This is a homemade processor 315.284.4126 head chipper with 1700 hours, Faxwith a 10’ log deck. Has a 315.849.2045 in very good condition. EasilyWebsite hydraulic grapple, chain and produces high quality chipswww.empirehyd.com with kicker that all runs off of a 4 Email patented drum design. cylinder Mercedes power unit. “Precision‘Cone’ Under Pressure” info@empirehyd.com Can easily load 42’ vans and Has a 4’ chain saw that kicks off produce 6 - 8 loads per day. onto a conveyor. This is a very Item ID 13882. Austin x703 well built processor. FIREWOOD PROCESSORS Item ID 13820. Sam x702 2010 SHOP BUILT FIREWOOD PROCESSOR WOOD PROCESSOR This is a Chomper Model 16 PDA It has a 353 Detroit diesel, 40 inch automatice firewood processor insert tooth circle saw, 30 foot with John Deere power unit with chain conveyer, 8 way splitter, on low hours. Control panel includes 20,000lb goose neck trailer. tach, oil pressure, water temp and Item ID 13916. Austin x703 amp gauges. Cuts logs up to 16”. One owner and comes with all

PIPER’S Saw Shop

manuals and receipts. Purchased new for $32,500. Item ID 13865. Sam x702 LOGGING EQUIPMENT BANDIT

2004 BANDIT BEAST MODEL 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. Just finishedH140 10 Acre ‘16 Halverson clearing job, ready to work! Remote Skidsteer (DEMO) control. Big production capacity! Item ItemID: IDJW-909632 13421. Sam x702 Contact: J BARKO Williams Ph: (888) 401-6367 x701 1994 BARKO 160B Electric knuckleboom, 30’ boom, 75hp motor, Rotobec continuous grapple, 5,000 original hours. (excellent condition). Item ID 13238. Chris x700

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

5 7 0 6 • 5 4 8 • 800

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Simonds Red Streak Hard BackCTL 70 ‘05 Gehl 1-1/4” x .042 x 3/4” or 7/8” Item ID: JW-986495 L im it e d Length 13’2”Contact: J Williams

‘83 John Deere $14.27 4850 $14.71

Ph: (888) 401-6367T x701 im e

each

O n ly

Tell us you saw it here! chain conveyer, 8 way splitter, on

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot

BELL TREE CUTTER Around 1000 hours on the machine. New air cooled motor only about 300 hours. Rebuilt dangling head. Several bars and chains. Machine ‘95 John Deere C6 came off the job in February and is Tree field ready.Farmer Item ID:13943. 13920Austin x703 Item ID Contact: Austin CASE Ph: (888) 401-6367 2006 CASE 440 SKID x703 LOADER

With only 871 hours, this machine starts, runs, and capacity!. 13421. Sam many x702 operates Item like ID new. I have videos available and can be sent BARKO upon request. 1994 Barko 160B - Electric Item ID 13886. Austin x703 knuckleboom, 30' boom, 75hp

motor, Rotobec continuous 99’ CASE 850G LONG TRACK DOZER

Firewood Processor - This is automatice firewood processor

1995 Barko 775 B Feller Buncher

a Chomper Model 16 PDA

been used the woods, it has 13238. Chris in x700

tach, oil pressure, water temp and

a ripper on the back, original pads, and chains, Under carriage -isPumps recently redone. 400 hrson new along with new rollers on always started theinjection bottom,pump. and new sprockets. Item ID 13909. Austin x703 good. in good working order. 22in

One owner and comes with all

CATERPILLAR Item1994 ID 13185. Sam x702 320

with John Deere power unit with

low hours. Control panel includes amp gauges. Cuts logs up to 16”.

CATERPILLAR kohing head. head works great.

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

Dry machine that is in good condition for the year. The stick and approximately Hour bucket cylinder 1500 have hours. been repacked. meter work.and The bucket last 2 owners It has dont a thumb on it, also has 230 Waratah have onlya used it to load processing trucks or head that as canneeded. be sold as a backup Haswith a CTRit. Hours are around 19k, motor has delimber, grapple has been rebuilt. been replaced a couple years back. Boom cylinders havedaily. minor leaks. Machine is working Item ID ID 13694. Sam Austin x702 x703 Item 13936.

Well maintained. Item ID 13294.

1994 with low CATERPILLAR at hours at 3,500.D4 5.9 HI

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter. 13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

manuals and receipts. Purchased new for $32,500. Item ID 13865. Sam x702

LOGGING EQUIPMENT BANDIT

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner. Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

good condition. Just finished 10

Acre clearing job, ready to work! Remote control. Big production

 Issue 364 1986 386 Lumbermens List exchange itbuy  to save arch with winch. Low hours on ™  since Cat D5B Dozer❘ - Cat D5B s/n seLL  come hook up to and go your this skidder at only 3700. These

Contact: Austin 1993401-6367 BELL SUPER T Ph: (888) x703 Good running condition. 33” Bar Saw. Tires at 50%. Deutz engine. Hour meter broken. Item ID 13543. Sam x702

grapple, 5,000 original hours. only One owner machine, 3300 original hours, hasIDnever (excellent condition.). Item

Sam x702

Promotional Pricing Offer

BELL

1990 BELL SUPER T This Bell has a brand new Duetz engine. Lever control, 33” bar, pump and tranny has been rebuilt not long ago. Hour meter is inop. New paint. Runs perfect. Has heat and air, it just to be fixed. ‘93needs Barko 180B Item ID 13896. Item ID: 14077 Sam x702

22X380, direct drive, EROPS,

job site and put it to work to up

1999 Barko 160D - new engine with

94 Barko 275 - Excellent value

TRACK WITH GRAPPLE This is an extremely low hour dozer/ Runs Great!. ID 13740. skidder withItem only 2800 Sam actual x702 hours. Comes with new 30” pads and chain. Undercarriage is still in BELL excellent shape. Fixed grapple 1990 Bell Super T - This Bell hasand no winch. a brand new Duetz engine. Lever Item ID 13932. Sam x702 CUMMINS continuous grapple.

control, 33” bar, pump and tranny ❘

 LumbermensCO.com


NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

IN THE U DE

SA

P

RE

Boonville, New York www.starwebhosting.net/woodsmen/

T

Y

MA

Firewood Firewood Wrapper Wrapper ** CALENDAR** M IU

M Q UA

LI

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

Safe The Tree that Started Simple Reliableit All! Since 1986,Duty Lumbermens Heavy Framehas published a monthly circular HD Gear Boxloggers, reaching sawmills, pallet makers, recyclers and 1/3 HPwoodworking 120V Motor industrial plants worldwide. True Gear Reduction PUBLISHER ForkWoods Pockets Publishing

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

ADVERTISING SALESFaster! MID-ATLANTIC Better Bundles Morris Woods

LOGGING & BIOMASS EXPO

(888) 401-6367 ext. 704 www.gofastmfg.com morris@lumbermens.co

sales@gofastmfg.com 800-854-7439

MARKETING DIRECTOR John Williams (888) 401-6367 ext. 701 j@lumbermens.co

DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

TM

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

Go Fast Manufacturing, LLC W7824 Smith Street THE PAUL BUNYAN SHOW Shiocton, Wisconsin 54170 Fri, 6 Oct - Sun, 8 Oct Cambridge, Ohio www.ohioforest.org

** INFO LINK**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses. Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark .....................................9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler .............................14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 9


Cat C6.6L, 90% Undercarriage, 1996 CAT 214 MOBILE Phone GPS Ready, Sweeps & Rear EXCAVATOR 315.284.4126 with 36’ magnet 3 tons steel FaxScreen, 13’6” PAT Blade, 39,500 315.849.2045 LBS, Hours: 7,867 Horsepower: shear. low hrs! All hard tires,Website www.empirehyd.com 150 S/N: ALY03028. 4 outriggers ideal for scrap business. It also has info@empirehyd.com 48’ Email Item ID 13567. Chris x700 “Precision Under Pressure” swavel bucket for street ditch clean up. 2000 CAT 515 GRAPPLE Item ID 13441. Sam x702 SKIDDER One Owner Runs great! Is it an 1998 CATERPILLAR 515 excellent condition. Rubber is Grapple with winch, no heat or around 75% Has new Hydraulic air. Open cab skidder with 9800 pump and Charge pump. hours. Tires are 28L’s, rear 90% Item ID 13616. Sam x702 CLARK and fronts are 30% with new bear paws chains. CLARK RANGER 665D Item ID 13801. Sam x702 Tight and dry machine, rebuilt motor. hour meter broken, It has 2005 CATERPILLAR 525B a 353 Detroit, with grapple, and This is a dual arch skidder with winch, always fires right up, and winch. Very low hour skidder runs with no issues. with 7900 frame hours and Item ID 13748. Austin x703 only 63 hours on a new engine. Continuous grapple, EARLY 70’S CLARK 664 tires are 30.5’s @ 70%. This CABLE SKIDDER is a really nice skidder for the some center slack, needs front price. tires, comes with a spare tire. Item ID 13816. Sam x702 Gearmatic 19 winch doesn’t 13428 Victory Ln. // PO Box 124 hold good. 453 Detroit power Adams Center,D6N NY 13606 2007 CATERPILLAR LGP unit. DOZER ENCLOSED CAB Item ID 13629. Sam x702 Overall: Cab Heat & AC, 150HP

JEM

EXPORT LOG DEBARKING LINE Reconditioned 35  Nicholson A-5 debarker, cab, infeed hour glass rolls, log dischage belt with side log kickers. Call 208-4510365 for details. $279,000 JOHN DEERE

‘92 JOHN DEERE 590 DH140 CUTTER ‘16 Halverson Will need pads in the future, Skidsteer (DEMO)

sprockets and rails are about ItemitID: JW-909632 85%, has a 4cyl JD motor. It Contact: J Williams has a Rotnee dangle hd. w/ a bar Ph: and (888) 401-6367 saw a spare idler.x701 Item ID 13612. Chris x700 1995 JOHN DEERE C6 TREE FARMER Only 20 hours on a new 5.9 Cummins engine. The whole center has been fixed, and line bolt redone, transmission is tight, center pins are good. It has a full speed tranny, with two reverse, with a winch. Working daily. ‘13 2500 Track ItemKMC ID 13920. Austin x703

Skidder

2004 648GIII JOHN DEERE Item ID: 14078 DUEL ARCH SKIDDER Contact: Austin Slick Machine. Runs good motor Ph: (888) 401-6367 x703 is in top notch condition. Item ID 13610. Sam x702 off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702 All Sizes Available!

BANDSAW

BLADES

secondary wood processing. Welded to your lengths! 16 a Chomper Model We also offer expert sharpening services, plus...

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

Item ID: JW-986495....and just about any Custom Saws you need power unit with with John Deere to keep you cutting longer... Contact: J Williams low hours. Control panel includes for less. Ask about FREE Shipping! Ph: (888) 401-6367 x701 tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703 Best Value

One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Call Marvin Miller a quote Portable Log Splitter Sam forx702 231-924-5953 (fax) 231-924-6166 / 11606 Brickyard Road • Holton, MI 49425

LOGGING EQUIPMENT BANDIT

- Small manufacturer in PA has

©2019 Wood-Mizer LLC

made the best valued log splitter.

Item ID: 14077 DOZER Contact: This work Austin horse comes with a Ph: (888) x703 winch, and401-6367 new undercarriage, it is tight and dry & running daily with 4500 hours. Item ID 13883. Austin x703 2006 JOHN DEERE 748GIII 8700 hours, running daily. Item ID 13881. Austin x703 2006 JOHN DEERE ‘95 John Deere C6 FIREWOOD PROCESSOR This is aFarmer Chomper super 14, Tree

with a 60hp engine. In very nice Item ID: 13920 shape. Only 171 hours, comes Contact: Austin with green chain conveyer. Ph: (888) 401-6367 x703All of the manuals for the engine, and the chopper itself come with it, as well as all of the electrical capacity!. Item ID 13421. Sam x702 schematics. BARKO Item ID 13894. Austin x703 1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours. 13238. Chris x700

PDA

‘05 Gehl CTLGang 70• Edger • Scraggautomatice • Trim • Splitfirewood • Strob processor

‘83 John Deere 4850

‘93 Barko 180B 2006 JOHN DEERE 700J

(excellent condition.). Item ID

Firewood Processor - This is

TOP PERFORMING, economical blades for all primary &

2004 JOHN DEERE 648GIII This machine has 13000 total hours on the body, with only 3000 hours on the new motor, comes with a set of chains, working daily. Item ID 13878. Austin x703

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

ROW ELECTRICAL EQUIPMENT, INC.

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start

Chipper - Cat Under Carriage at

Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value Diesel. 7500USED, Hours. One owner. Has Log Lift. Uses 4-way wedge YOUR SOURCE FOR RECONDITIONED:

• Squirrel Cage Motors Motors - CraneItem andIDMill with low atThree-Phase hours at 3,500. 5.9 adjustable to single two way. Great• DCWell maintained. 13294.• Transformers, • Gear Motors • Wound-Rotor Motors Firewood Processor - This is a • Synchronous Motors homemade processor with a 10’ • DC Motors

• • • •

Value! PA. Item ID 12062. Sam x702

Adjustable Speed Drives • Sam x702 Generators - AC and DC • 2004 Bandit Beast Sets Model 4680 - • Engine-Generator 3412 Caterpillar Diesel engine • Transformers, Single Phase

with 850 HP. 43606 5300 hrs. Mill in log deck. Has a hydraulic P.O. Boxgrapple, 2812 • Toledo, Ohio

Across/Line Magnetic Starters CUMMINS continuous grapple. Reduced Voltage Starters Runs Great!. Item ID 13740. Sam Safety Switches x702 Phase Convertors

BELL

Fax toand : kickerWWW.RoWELECTRiCAL.CoM 800-248-4479 1990 Bell Super T - This Bell has chain that all runs off good condition. Just finished 10

Acre clearing job, ready to work! of a 4 cylinder Mercedes power 419-244-8887 rowelec@glasscity.net

- It has a 353 Detroit diesel, 40

delimber, grapple has been rebuilt.

inch insert tooth circle saw, 30 foot

a brand new Duetz engine. Lever 419-248-4479

control, 33” bar, pump and tranny Remote control. Big production unit. Has a 4’ chain saw that kicks WE ANSWER THE PHONE 24 HOURS • WE BUY USED ELECTRICAL

 Issue 364 386

Lumbermens™  since 1986

 List  seLL  exchange  buy  save

 LumbermensCO.com


** CALENDAR** LOGGING EQUIPMENT CONSIGNMENT AUCTION NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August 30+ Boonville, New York www.starwebhosting.net/woodsmen/

Years Strong!

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants8 Models  Firewood Processors: worldwide.

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS

Danckaert Band Resaw - Roughly 10 hours on this machine since it

has been rebuilt, it has a 24foot in From Price To feed deck 20 foot out feed deck GREAT LAKES Performance, 72ND ANNUAL CONDUCTED BY IRON HORSE with 44 inch wheels, and all the LOGGING & HEAVY EQUIPMENT EXPO We’re A Cord Thurs,AUCTION CO., INC. IN CONJUCTION 7 Sept - Sat, 9 Sept bells and whistles, its a production Above The Rest! Escanaba, Michigan

machine, with air strain conveyers WITH THE CAROLINA LOGGERS that go up and down, with airbags,  Firewood Cleaners MID-ATLANTIC LOGGING & BIOMASS ASSOCIATION it includes two sets of Mcdonough

 Firewood Conveyors: 12’, 20’ & 30’  Operator’s Cabs Fri, 15 Sept - Sat, 16 Sept PUBLISHER pressure guides. Top Casting wheel Selma, North Carolina AUCTION DATE: SAT., NOVEMBER 9, 2019 - 9AM  Firewood Woods Publishing& Log Grapples  Free DVD www.midatlantic-logging-biomass­ is supported on both sides. This ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

Williams PJohn ortable • DePenDable • low Maintenance

(888) 401-6367 ext. 701

j@lumbermens.co 888-SPLITTER (888-775-4883)

319-986-5525 Local • 2756 Kentucky Ave, Mt Pleasant, IA DESIGN DIRECTOR

blockbuster-inc.com

Donna Heninger

EQUIPMENT REPS

Sam Wall WWW.TREETRADER.COM (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402 The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

AUCTION FACILITY - 174 AIRPORT RD.,

in ve1y good condition, Cuts 130 KENTUCKY WOOD EXPO ROCKINGHAM, NC 28379 feet a minute also has CLT presses. Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

100

expo.com/ AUCTION LOCATED AT IRON HORSE is an extremely accurate machine

LOGGING & BIOMASS EXPO

Item ID 13876. Austin x703 Lexington, Kentucky * ONLINE BIDDING AVAILABLE * http://www.kfia.org/ S & W 125 Band Mill with KentuckyWoodExpo.aspx

Caterpillar generator - Low hours

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track

Cat 3406 140KW Genset, 12,400 Cambridge, Ohio www.ohioforest.org ~ The World’s Largest Website For The Tree & Landscape hours ready Industry to run. Item ID 13434.

** INFO LINK**

Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

2012 John Deere 748H Grapple Skidder Meadows Mill, Inc. ................ 33 drive, hyd pac for carriage,

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

Buck Equipment (AIM) ........ 36

Morbark .....................................9

Corley Mfg .............................. 32

Multitek ................................... 12

2006 CAT 517

with onboard log turners, carriage

QUALITY ‘14 Hurdle 3-Hd CONSIGNMENTS carriage knees, husk including Block Sawmill ACCEPTED, ALL

48"Item bottom and 36" top saw ID:saw 13997

CONSIGNMENTS

Contact: Austin NEED TO BE ON THE Ph: (888) 401-6367 x703

STACKING RAC YARD BY NOV. 6TH AT 4PM.

CRD Metalworks .................... 25

ItemSaw ID: 13869 Piper's Shop.................... 13

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11 AUCTION MANAGER, WILL LILLY AT 704.985.9300

2008 PITTS Lowboy Trailer Contact: Sam ............................ CW Mill-ArmorHog .............. 17 Rotochopper Ph: (888) 401-6367 x70240

Inspections: November 7th & 8th from 9am to 5pm & The Morning of the Sale from 7am to 9am

Empire Hydraulics ................... 8

or WILL@IRONHORSEAUCTION.COM Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler .............................14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23 1.800.997.2248 - NCAL 3936

Lignomat ................................. 24

WoodMizer ................................ l

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Firewood Proc.

Item ID: 13865 *VISIT OUR WEBSITE* Contact: Sam

Ph: (888) 401-6367 x702 IRONHORSEAUCTION.COM

‘14 Komatsu WA200 ❘ 0  24/7 SUPPORT SUPPORT Loader

 SELL YOUR EQUIPMENT TODAY TODAY l§

One Owner, low hours!

www.BakerProducts.net 800.S48.6914 I S73.663.7711

❘ L!  (888) 401-MENS NO. 11 401-MENS boom loader, 3 knife disc, Newer

discharge chute, New banding


2012 JOHN DEERE 548GIII Phone GRINDMASTER Single arch with winch, blade 315.284.4126 SUDDRETH HORIZONTAL extensions, 1 new 28L and 3 @ Fax GRINDER 315.849.2045 50%. This is still a new machineWebsite This is a 60 HP low rpm www.empirehyd.com with only 3600 hours. Horizontal grinder, comes Email Item ID 13780. Sam x702 “Precision Under Pressure” info@empirehyd.com with a blower, and the blower 2009 JOHN DEERE 648H This is a one owner machine, every switch works, interior is very clean, radio, heat/ac. Air ride works as it should. Tires are 30.5x32. Extremely clean machine with no leaks. Cutting edge on blade is excellent, with no cracks or welds anywhere. Item ID 13747. Austin x703 FRANKLIN

1995 FRANKLIN 170 Enclosed cab, single arch with a winch, new paint, 4 brand new 23.126 firestone tires, around 15000 hours. Item ID 13910. Austin x703

connects to the grinder with a pipe. It has top and bottom infeed rolls. Overall lightly used, in really good shape. Width capacity is around 30” maybe even wider. Item ID 13889. Austin x703 HYDRO-AX

1998 HYDRO AX 611EX SAW HEAD FELLER BUNCHER with about 8800 hours. Bunching Saw Head has large pocket for accumulation and lifting side shield for notching larger trees before felling. Cummins engine. 28L tires at 60%. Decent running condition. Item ID 13245. Sam x702

2003 FRANKLIN Q80 GRAPPLE SKIDDER 2002 HYDRO AX 621E 7500 hours, but just 5000 hours Arouund 12,000 hours 13428 Victory Ln. // PO Box 124 on reman engine. New Radiator; on this machine. Working Adams Center, NY 13606 New Hydraulic Pump; Comfort daily. cab with good working heat and Item ID 13884. Austin x703 air; Tires at 80%. Item ID 12450. Sam x702

with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 386

John Deere Dual Arch Item ID: JW-909632 Grapple, Deere winch, Contact: John J Williams Model 4000, Cummins Ph: (888) 401-6367 x701 Engine, Model 6BTA, Clark Transmission 28000. Item ID 13738. Austin x703

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

motor, Rotobec continuous

off onto a conveyor. This is a very

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865. Sam x702

LOGGING EQUIPMENT BANDIT

but electronic option is available.

50% or better. 475 hp Cummins

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

LIEBHERR

well built processor. Item ID 13820.

Item ID:KOMATSU 14078 2008 D61-EX Contact: Austin DOZER Ph: (888) 401-6367 x703Hours. Great Condition. 4511

1999 Bandit 1900 Tracked Disc

Has Log Lift. Uses 4-way wedge

2012 KOMATSU D61EX 15 DOZER with only 750 Hours. Triple Rippers; Limb Sweeps; Enclosed cab with Heat/AC; 6 way blade; ‘93 Barko 180B Undercarriage at 90%; Excellent Item ID: 14077 Condition! Contact: Item ID Austin 13459. Sam x702 Ph: (888) 401-6367 x703 2014 KOMATSU 450 Only 1100 hours on this machine, in excellent condition. Item ID 13937. Austin x703

Komatsu U/C at 95%. 35% Pads. 6 Way Blade. Fully Enclosed

2007 KOMATSU PC220LC w/2009 Log Max 7000XT processing head. 9700 hours on carrier. 7200 hours on Log Max. Excavator style. Cab guard. Flotation pads. One owner. Very ‘13 condition. KMC 2500 Track good Item ID 13464. Sam x702 Skidder

Handles logs up to 32”. Uses

13HP Honda motor. Manual start

comfort cab. Great price! Item ID 13570. Sam x702

2007 LIEBHERR A924C LOG HANDLER RUBBER TIRED LOG LOADER 13,000 hours. 40’ C6 Reach ‘95 John Deere with two section boom. 60” Tree Farmer Log Grapple with continuous rotation. Cab Riser with Item ID:Fixed 13920 cab guard protection. Contact: Austin Front push blade. Tight401-6367 and dry. x703 Cleaned, Ph: (888) Serviced, and Checked out for service. Can pull loaded trailer. 4-Wheel Item drive and Sam steering. capacity!. ID 13421. x702 Top Quality machine. Would be BARKO great for log yard or mill work. 1994 Barko 160B - Electric Item ID 13476. Sam x702

KOMATSU

Firewood Processor - This is

‘05 Gehl CTL 70

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

‘16 Halverson H140 KMC Skidsteer (DEMO) KMC TRACK SKIDDER 2500P

Sam x702

See us at the PAUL BUNYAN SHOW BOOTH# 411

‘83 John Deere 4850

1998 711EX SAW HEAD FELLER BUNCHER 30.5-32 tires at 40%; Cummins Engine rebuilt 1500 hours ago; 8750 hours; Quadco 22” Large tree saw head. Heat and A/C work. New bearings in saw. Cutting trees today. Item ID 13353. Sam x702

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

knuckleboom, 30' boom, 75hp grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

 LumbermensCO.com


** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

LUMBERMEN’S

MARKETING DIRECTOR

John Williams (888) 401-6367 ext. 701Equipment j@lumbermens.co Digest

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

PROTECT ALL ** Them INFO LINK** ® With Pro-Tec-To Wrap

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7 Menominee Saw ..................... 29 Hydraulic Lines – Fuel Hoses – Air ‘94Lines Caterpillar Bell's Machining ..................... 27 Metal Detector's Inc. .............. 30 Electric Wire Bundles – Control 320 Cables Brute Force Mfg. ..................... 31 Midwest Sharpening.............. 26

AD SUBMISSIONS

Ite Co Ph

is an extremely accurate machine in ve1y good condition, Cuts 130

works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls,

‘88 John Deere 440D Skidder carriage knees, husk including

May be sent to­ morris@lumbermens.co

cabinet with electronic drives for

POSTMASTER

48" bottom saw and 36" top saw

Item ID: 13936 Buck Equipment (AIM) ........ 36 Morbark .....................................9 Send address changes to: Contact: Austin Lumberman's Exchange ®Corley Mfg .............................. 32® Multitek ................................... 12 Ph: (888) 401-6367 x703 PRO-TEC-TO WRAP & PRO-TEC-TO SLEEVE P.O. Box 1916 Piper's Saw Shop.................... 13 CRD Metalworks .................... 25 COSTS! CUT YOUR DOWNTIME AND YOUR

Columbia, TN 38402

The Lumberman's Exchange is Against Pinching, ............................ 40 CW Mill-ArmorHog .............. 17 Rotochopper Protection Crushing, Rubbing & Abrasion 4000 hours. Torque convertor published monthly by Woods EVEN are Impervious to Oils Solvents. CW Mill-Hogzilla ................... 15 and Row Electric ............................ 20 Publishing, P.O.–Box 1916, UV RAYS! Both transmission. 14 hole wheels. Tires Columbia, TN 38402. All rights Dyna Products ........................ 35 Sawmill .................. 11 are 30.5’sExchange at 55% and one at 80%. reserved. All editorial/ advertorial Provides Maximum Protection for Logging, For The Distributor submissions are used at the CenterSawmill has very......................... little slack. This Empire Hydraulics ................... 8 Select 19 Construction & Stationary Applications Like: discretion of the publisher and may Nearest You, Call skidder has been a back up skidder be edited for purposes of clarity Great Lakes Mfg. .................... 34 Smith Sawmill ........................... 4 • Debarker Buggies • Pantograph Arms • Forklift Masts and space. Although all efforts have for the several years. Skidder has • Wheel Loaders • Skidder • Knuckleboom Hahn MachineryLoaders ...................... 3 The Paul BunyanorShow been made to ensure accuracy of Grapples Visit ......... 39 Fellerbuncher Heads • Harvesting Heads • Stroke 12000 hours. Item ID 13805. Sam content •submitted by advertisers www.pro-tec-toproducts.com Hurst Boiler .............................14 Thomas Industrial Controls..... 10 and writers, the Lumberman's Delimbers • Dozer Blades x702 Exchange, its principles and Iron Bull ................................... 21 Union Grove Saw & Knife.. 2, 37 ® Anywhere Hoses & Wires Are – Pro-Tec-To Products associates, are not held liable for 1981 Timberjack 520 - Very OEM’s, Repair Facilities & hard to errors orOffers omissions. Reproduction, Maximum Protection, Lower Reduced KilgoreCosts, Saw ............................. 22 Distributor Universal Refiner ................... 23 Inquires Welcome come by! 653 Detroit. Runs Great!. in whole or part, is prohibited Downtime and Lesswith­ Spills! Lignomat ................................. 24 WoodMizer ................................ l out written consent. Item ID 13741. Sam x702 ©2017 Woods Publishing

800-355-1250

2002 Timberjack 608s with hot saw

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

19 44

feet a minute also has CLT presses. LUMBERMEN’S Equipment Digest Item ID 13876. Austin x703 Lexington, Kentucky PO Box 1146 http://www.kfia.org/ S& 125 Band Mill with Columbia, TNW38402-1146 KentuckyWoodExpo.aspx 1-800-477-7606 Fax (931) 388-3564 Caterpillar generator - Low hours www.lumbermenonline.com on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

 SELL YOUR EQUIPMENT TODAY 6000 ❘ hours,  24/7 SUPPORT l§ TODAY - Approx. Machine is 0 SUPPORT

 Issue 364

Item ID: 13781 Contact: Sam Ph: (888) 401-6367 x702

STACKING RAC

in very good shape and has been well maintained. Item ID 12194. Sam x702

‘98 Timberjack 1270B - 7,300 hrs. Perkins 6 Cylinder Engine. All

modules and computer are brand new. Tires on average are around 80% Video: http://youtu.be/R_

MQZe5QEFw. Item ID 13572. Chris x700

VALMET

www.BakerProducts.net 1998 Valmet 603 3-Wheeled 800.S48.6914 I S73.663.7711 Buncher - 6500 hours on total

❘ machine  (888) 401-MENS NO. 13 L! 401-MENS but no hours on 4BT3.9

Lumbermens  since 1986

58 Ch

Ite Co Ph

Rem

Equ

Spee

40%

mac

mai

Har

of co

avai

Item

2005

Forw

hyd box

2012

pum

cond

hou

 List  seLL  exch


“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

‘95 John Deere C6 Tree Farmer ‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

well built processor. Item ID 13820. Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 386

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID

- Pumps recently redone. 400 hrs

tach, oil pressure, water temp and

good. in good working order. 22in

low hours. Control panel includes

Value! PA. Item ID 12062. Sam x702

Sam x702

knuckleboom, 30' boom, 75hp

with John Deere power unit with

Diesel. 7500 Hours. One owner.

Lumbermens™  since 1986

BARKO

1994 Barko 160B - Electric

1995 Barko 775 B Feller Buncher automatice firewood processor Clean-Burn Design

Has Log Lift. Uses 4-way wedge

Firewood Processor - This is a Rotary Dryers homemade Sand Dryersprocessor with a 10’ log deck. Has a hydraulic grapple, Grain Dryers Lumber Kilns chain and kicker that all runs off Cement Kilns of Brick a 4 cylinder Kilns Mercedes power unit. Has a 4’ chain saw that kicks

capacity!. Item ID 13421. Sam x702

13238. Chris x700 Innovative

a Chomper Model 16 PDA

amp gauges. Cuts logs up to 16”. Manufacturing a full line of biomass fired chain conveyer, 8 way splitter, on One owner and comes with all combustion systems backed with fifty years of 20,000lb goose neck trailer. Item ID and receipts. Purchased innovative clean-burn design. Diverse in manuals every wayAustin with multi-fuel Hurstfor $32,500. Item ID 13865. 13916. x703 blending capability. new stokers utilize hundreds of common and Best Value Portable Log Splitter Sam x702 abundant solid biomass fuels. - Small manufacturer in PA has Large or small scale, project LOGGING EQUIPMENT management is eased with the made the best valued log splitter. BANDIT impressively short installation time Handles logs up to 32”. Uses 1999 Bandit 1900 Tracked Disc required with prefabricated 13HP Honda motor. Manual start Chipper - Cat Under Carriage at modular components. but electronic option is available. 50% or better. 475 hp Cummins adjustable to single two way. Great

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

Well maintained. Item ID 13294. 2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

on injection pump. always started kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

50

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

YEARS control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

 LumbermensCO.com


ngle Joystick Control 0 Ton Splitter • 67 HP CAT Diesel Cylinder Engine

o Choose From!

4000 SERIES

BELL’S FIREWOOD PROCESSORS BELL’S FIREWOOD PROCESSORS ManyPROCESSORS Models & BELL’S FIREWOOD CALENDAR**

**

• 67 HP CAT Diesel • 44” Circular Engine Saw 44” Circular Saw • 20”• Diameter • 20” Diameter Capacity Diesel Capacity • Single Joystick FIREWOOD TUMBLER • Single Joystick Control Saw • Sturdy HSS Steel Welded Control • 30 Ton Splitter er • 30 Ton Splitter • 4’ Diameter Barrel Cylinder Cylinder • 67 HP CAT Diesel ick • Clean Out Chute

4000 SERIES

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

Options to Choose From! 4000 SERIES

Many Models & FIREWOOD TUMBLER • Sturdy HSS Steel Welded 4000 SERIES Options to Choose From! • 4’ Diameter Barrel

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York

www.starwebhosting.net/woodsmen/ 67 HP CAT Diesel • 44” Circular Saw •• Removes Debris & Bark as large as• Clean 2 ¼”Out Chute • 67 HP CAT Diesel er Engine • 20” Diameter • Removes Debris & Bark as large as 2 ¼” Engine Capacity •• Works with Lift 44” Circular Saw all of our Double chain•Hydraulic Works with all of our conveyors Double chain Hydraulic Lift conveyors ••Single 44”Joystick Circular Saw 20” Diameter • Optional Honda Power Pack Available TUMBLER Control Honda PowerFIREWOOD •• Optional Pack Available Capacity Diameter ••30 20” Ton Splitter • Sturdy HSS Steel Welded • Single Joystick Cylinder Capacity Hot Springs, Arkansas • 4’ Diameter Barrel Control • Single Joystick • Clean Out Chute www.arkloggers.com • 30 Ton Splitter Control • Removes Debris & Bark as large as 2 ¼” Cylinder Engine

4000 SERIES4000 SERIES SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August The Tree Many Models & Many Models & that Started Options to Choose From! Options to Choose From! it Models All! • 30 TonMany Splitter Lift conveyors &• Works with all of our Double chain Hydraulic 72ND ANNUAL GREAT LAKES Cylinder • Optional Honda Power Pack Available Options to Choose From! Since 1986, Lumbermens has LOGGING & HEAVY EQUIPMENT EXPO Many Models & FIREWOOD TUMBLER Made In published a monthly circular Canada Options to Choose From! FIREWOOD • Sturdy HSSTUMBLER Steel Welded Thurs, 7 Sept - Sat, 9 Sept

BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production

•• Sturdy HSS Steel 4’ Diameter BarrelWelded reaching sawmills, loggers, Escanaba, Michigan Clean Out Chute •• 4’ Diameter Barrel TUMBLER pallet makers,FIREWOOD recyclers and Many Models & • Clean Removes Debris & Bark as large as 2 ¼” • Sturdy HSS Steel Welded• FIREWOOD TUMBLER Out Chute industrial woodworking plants • Sturdy HSS Steel Welded Works withDebris all of our Double chain Made In • 4’ Diameter Barrel Options to Choose From! LOGGING & BIOMASS •• Removes & Bark asMID-ATLANTIC largeHydraulic as 2 ¼” Lift conveyors worldwide. • Clean Out • 4’ Diameter Barrel • Optional Honda Power Pack Available Chute

machine, with air strain conveyers that go up and down, with airbags,

Canada Many Models • Works with all&of our Double chain Hydraulic Lift-conveyors Please Call for Details • Clean Out Chute Fri, 15 Sept Sat, 16 Sept • Removes DebrisDebris & Bark as large as 2 ¼” • Removes & Bark large Made In as 2 ¼” Honda Power Pack Available •as Optional PUBLISHER • Works with all of our Double chain Hydraulic Lift conveyors • Works with all of our Double chain Hydraulic Lift conveyors Selma, North Carolina Options to Choose From! Canada Woods• Publishing Optional Honda Power Pack Available FIREWOOD TUMBLER Optional• Honda Power Pack Available www.midatlantic-logging-biomass­ • Sturdy HSS online Steel Welded MID-ATLANTIC or visit us ADVERTISING SALES expo.com/ LOGGING & BIOMASS EXPO • 4’ Diameter Barrel

1-888-995-1965

Details

it includes two sets of Mcdonough pressure guides. Top Casting wheel

supported on both sides. This Every ReputableisisWide Band an extremely accurate machine Supplier Offers in ve1y good condition, Cuts 130 KENTUCKY WOOD EXPO

www.bellsmachining.com • Clean Out Chute Morris Woods FIREWOOD TUMBLER • RemovesAvailable Debris & Bark as large as 2 ¼” (888) 401-6367 ext. 704 Financing • Works with all • of Sturdy our Double HSSchain SteelHydraulic Welded Lift conveyors morris@lumbermens.co Made In Please Call for Details • Optional Honda Power Pack Available

MARKETING DIRECTOR 1-888-995-1965 John Williams

-1965or visit us online

Made In Canada

Made In Canada

(888) 401-6367 ext. 701 j@lumbermens.co www.bellsmachining.com

3 High Quality Swedish feet aSteel minute also has CLT presses. 3 3” – 8” Band WidthItem ID 13876. Austin x703 S & W 125 Band Mill with 3 16 to 20 Gage 3 Double Cut OptionsCaterpillar generator - Low hours on the mill, electronic computer Set THE PAUL BUNYAN SHOW 3 Choice of Swage or Stellite

Fri, 15 Sept - Sat, 16 Sept • 4’ Diameter Canada Barrel • Clean Out Chute Lexington, Kentucky MadeDebris In • Removes & Bark as large as 2 ¼” Canada http://www.kfia.org/ • Works with all of our Double chain Hydraulic Lift conveyors KentuckyWoodExpo.aspx • Optional Honda Power Pack Available

nline ‘06 Please CallPlease for Details Call for Details Brewco B1600 DESIGN DIRECTOR Financing Available 1-888-995-1965 Donna1-888-995-1965 Heninger ning.com Resaw Please Call fororDetails visit us onlineCall for Details Please EQUIPMENT REPS or visit us online www.bellsmachining.com ailable Item ID: 13862 1-888-995-1965 Sam Wall Financing Available Made In Canada

1-888-995-1965

www.bellsmachining.com Contact: Samext. 702 (888) or visit us 401-6367 online Financing or visitx702 usAvailable online sam@lumbermens.co Ph: (888) 401-6367 Made In www.bellsmachining.com Please Call for Details ‘05 Woodmizer Canada www.bellsmachining.com Austin Woods Financing Available

Now One Phone Puts You in1-888-995-1965 Touch with ThE Single LT300 Source (888) 401-6367 ext. 703 Available Financing or visit us online austin@lumbermens.co INFO Item ID: 14031 for all your Sawmill Needs! www.bellsmachining.com Contact: Austin MAILING ADDRESS

**

Financing Available &Ph: B Mfg . ............................... P.O. Box 1916 (888) 401-6367 x703 18 Please Call for BDetails Corley Columbia, TNSawmill 38402-1916maChinery B. H. Payne .............................. 16 (888) 401-6367 Berry Carriage DriveS Tyrone

1-888-995-1965

Baker ...................................... lewiS ConTrolS opTimizaTion 5, 7 AD SUBMISSIONS or visit us online

May be sent to­ Bell's Machining ..................... 27 www.bellsmachining.com morris@lumbermens.co Carriage Linear & Set Shaft

Brute Force Mfg. ..................... 31 Available

Financing Lewis Controls “Electronics for sawmills by sawmillers”

POSTMASTER John Deere 548G2 Tyrone-Berry Carriage Parts Equipment • Headrig Slabbers (AIM) ........ 36 Send address changes to:Drives & Buck

ItemLog ID:Turners 14042 Lumberman's Exchange • Bandmills & Linebar Resaw Systems Corley Mfg .............................. 32 Contact: Austin P.O. Box 1916 Board & Gang Edgers • Trimmers Columbia, TN 38402x703 Ph: (888) 401-6367 CRD Metalworks .................... 25

‘14 B66TD TheExchange Most Complete Line of Sawmill .............. 17 The Lumberman's is CW Mill-ArmorHog Rotochopper published monthly by Woods - 3410 hours. $32,000 in recent Machinery

Since 1905!

CW Mill-Hogzilla ................... 15 Publishing, P.O. Box 1916, Item ID: 13838 upgrades repairs. Fecon Columbia, TN and 38402. All rights Dyna Products ........................ 35 Contact: Sam Single Machine or Complete Turn-Key Operation reserved. AllMulching editorial/Head. advertorial BH250 Item ID (888) 401-6367 603 8 submissions are used at the More Production & Profit isEmpire OnlyHydraulics One CallExt. Away ................... 13502.ofSam discretion the x702 publisher and may For Parts, Service & Sales be edited for purposes Great Lakes Mfg. .................... 34 2011 Tigercat 620Dof- clarity This is a and space. Although all efforts have ItemMachinery ID 13408. Sam x702 hour skidder with only Hahn ...................... 3 beenlow made to ensure accuracy of 5500 content submitted by advertisers 2014 Tigercat 630D Grapple hours on a cummins engine and Hurst Boiler .............................14 and writers, the Lumberman's Skidder - Dual Arch Grapple. Just a fire suppression Comes Exchange, its principlessystem. and Iron Bull ................................... 21 associates, are on not35.5 heldtires liableatfor 1990 hours. 3 year/5000 hour PT mounted 50% back errors or omissions. Reproduction, Kilgore Saw ............................. 22 warranty. 35.5 tires with dualing and 40% front and good chains in whole or part, is prohibited with­ on Lignomat ................................. 24 out written consent. www.corleymfg.com • sales@corleymfg.com rings at 60%. Wide blade. Winch. all 4 tires. Has the bigger 630 axles ©2017 Woods Publishing

mfg

Call (423) 698-0284 CORLEY

Fri, 6 Oct - Sun, 8 Oct Cambridge, Ohio BUT ONLY www.ohioforest.org

works,1 1/2" or 2" band, 22ft. track

WOLVERINE

Cat 3406 140KW Genset, 12,400

THE hours ready to run. Item ID 13434. Sam x702 BY MENOMINEE SAW GUARANTEES

CARRIAGES & DRIVES • Cutting Edge Plasma Welds 2010 Cardinal HD Carriage • The Industry’s HighestCarriages Band (Sawmill) Saw Capacity - Cardinal Carriage line it includes carriage • Quick Delivery from our HUGE Inventory M&F Gauge ............................. 28 with onboard log turners, carriage • Fast Program Meadows Mill,Sharpening Inc. ................ 33& Exchange drive, hyd pac for carriage, to Keep YOU Running Menominee Saw ..................... 29 sawyers cab, computer controls, ‘89 Cat D4H LGP • Competitive Pricing ‘03Detector's John Deere cabinet with electronic drives for Metal Inc. .............. 30

LINK**

Item ID: 13999

748GIII

carriage knees, husk including Midwest Sharpening .............. 26 Contact: And ONLY Menominee Gives YouAustin Everything 48" bottom saw and 36" top saw Ph: (888) 401-6367 Item ID: 13851 Morbark .....................................9 You need in a Wide Band Saw – Plus x703

Contact: Sam Ph: (888) 401-6367 x702

Multitek ................................... Expert Service 12 from

the Industry’s Most Knowledgeable Staff. Piper's Saw Shop.................... 13

Rotochopper............................ 40

Got a Wide Band Problem? Saw Today and You’ll Sawmill Exchange 11 Mills Trust the Pro! Learn.................. Why More

Row Electric ............................ 20 Call Menominee Select Sawmill ......................... 19 Smith Sawmill ........................... 4 The Paul Bunyan Show ......... 39 Thomas Industrial Controls..... 10

234B. Only 300 hours on this

‘04 Hood Loader TOLL FREE 28000

1-800-582-0470 Item ID: 13971 Contact: Austin

900 16th St., Menominee, MI 49858 Ph: (888) 401-6367 x703 Tel: 906-863-2609 Fax: 906-863-1147 Universal Refiner ................... 23 info@menomineesaw.com 2004 JohnEmail: Deere

Union Grove Saw & Knife.. 2, 37

hours, 36” pads. It does have some www.BakerProducts.net

648G WWW.MENOMINEESAW.COM III 800.S48.6914 I S73.663.7711 small leaks. Owner is going back

WoodMizer ................................ l

and no winch. Center pins are tight Item ID 13526. Sam x702 Item ID: 13878 - USED FORESTRY EQUIPMENT FOR SALE  SELL EQUIPMENT TODAY ❘ Austin grapple 24/7 SUPPORT SALE l§ TODAY 0 SUPPORT 2015❘ Tigercat 234BYOUR Loader - Model Contact: and extra fuel tank. Item ID 13929. roatation on the w/ a Sam x702

STACKING RAC

Ph: 401-6367 30’ (888) reach on the boom.x703 Joystick

to rubber tired cutters because his ❘ 2006  (888) 401-MENS L! 401-MENS Tigercat 630C GrappleNO. 15 job has changed. Item ID 13898. Skidder - Very good running Sam x702


Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

Shrink Wrap FireWOOD/WaSteWOOD

“Precision Under Pressure”

‘16 Halverson H140 ‘97Skidsteer Timberjack (DEMO) Item ID: JW-909632 360C

Sell Your WOOD – $300/cord or More! Double or triple your profits by shrink wrapping wastewood - forewood with WOOD-PAKer! Attractive various size packages can be obtained with our high production, easily operated and affordable machines. Eight machines available. The ideal equipment for producing square bundles-palletizable for ease in storage and transporting. Inquire for free details. Video and Package samples at nominal fee. B & B Manufacturing • 3007 West River Road • Olean, NY 14760

Toll Free 1-800-654-5320

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

E-mail: bbmfg@verizon.net • Web: www.bbmfg.org

Contact: J Williams

Item ID: 14047x701 Sawmill CAT TSK DeereItem ID: 14035 Ph: (888) 401-6367 ‘83D4H John Contact: Austin Item ID: 13558 Ph: (888) 401-6367 x703 Contact: Austin 4850Sam Contact:

‘05 ‘95 John Deere C6 Tree Farmer John 548D ‘13Deere KMC 2500 Track Item ID: 14024 Skidder Contact: Sam ID: 14078 Ph:Item (888) 401-6367 x702 Contact: Austin Ph: (888) 401-6367 x703

Has a 2000 hour warranty. It comes

mounted on 30.5 tires at 95%. off onto a conveyor. This is a very Comes with a 22” tower head. Item

stillFirewood a new skidderProcessor with only 1480- This is a Chomper Model 16 PDA hours. Owned by a construction

automatice firewood company that is no longer needed. processor with John Deere power unit with Dual arch, winch, joystick controls,

low hours. Control turn around seat, wide blade andpanel includes ‘10 Shop Built temp and HDtach, axles. oil Was pressure, bought new in water Jan

Wood Processor

gauges. Cuts and logs up to 16”. andamp still has factory warranty Item ID: 13916 owner and comes anOne extended warranty can still be with all Contact: Austin

chain Ph: (888) 401-6367 x703conveyer, 8 way splitter, on Item ID: 14073 Ph: (888) 401-6367 x702 20,000lb goose neck trailer. ID bought manuals and401-6367 receipts. Purchased Ph:for(888) x703 Components to 2017 or Item 3000 hours. this skidder. Save a Contact: Austin 13916. Austin x703 foron$32,500. Ph: (888) 401-6367 x703 Totally loaded with extras. Has lotnew of money this slightlyItem used ID 13865.

Log Splitter Only 4200 hours. Factory warranty manually. Great buyBest on thisValue Deere. Portable counterweight/running boards. with 1700 hours, in very good Small manufacturer in PA has until 5000 hours. Great running Tinted windows to help keep the Includes the JD 22” Hot Saw with condition. Easily made the best valued log splitter. condition. 35.5 tires at 60%.produces Tight sunhigh and heat out. Item ID 13856. 40 degree tilt. 36” wide flotation quality chips with patented ‘Cone’ Handles logs up to 32”. Uses and Dry. Great value. Item ID Sam x702 pads. Simply perfect condition.

drum design. 42’Deere 437D 13HP HondaNew motor. Manual 13482. Sam x702 Can easily load 2013 John - This loader price is $445,000. Savestart $40,000 vans and produce 6 - 8 loads but electronic is available. 2012 John Deere 548GIII - Single is stillper like brand new. It has been for option only 380 hours of use!. Item ID day. Item IDblade 13882. Austinwell x703 Has Uses arch with winch, extensions, taken care of with onlyLog 2932 Lift.13574. Sam4-way x702 wedge EDGERS & isGANGS single two160G way. Great 1 new 28L and 3 @ 50%. This hours. CSI delimber,adjustable Kodiak, Series to2014 John Deere Excavator -

Samover x702 skidder a brand new one. Skidder - Very good running LOGGING Item ID 13933. Sam x702 EQUIPMENT condition. Big Capacity Grapple! 2015 John Deere 748L -BANDIT This 9400 hours. Tires at 40%. Totally 1999 Bandit 1900 Tracked Disc skidder is still smells new with gone through by TP Dealer who Chipper Under Carriage at only 1000 hours-ofCat use. Mounted did the following: Repacked and better. hp Cummins on50% 30.5 X or 32 tires with a 475 new set resealed hydraulic cylinders – Diesel. 7500 Hours. of tire chains. Dual arch, winch, One owner. grapple arch, steering; Replaced Wellcontrols, maintained. joystick turnaround Item seat, ID 13294. hydraulic hoses and lines where Sam wide bladex702 and HD axles. Save

Brewco Sawswith - Two Brewco Sawslanding Value! PA. Item ID excavator 12062. with Sam still a new machine only 3600 3 hydraulic gear. You will Low hour onlyx702 1500 – fillnew pump, grapple, in excellent condition. great. Firewood This is a Item ID onneeded 2004 Bandit Beast Model 4680etc; hours. Item ID 13780. Sam x702 Runs not find another loader this clean. Processor hours. Still a -new machine. this over a brand skidder Repacked hydraulic fill pump; Item Sam x702 Item ID 13822. Sam x702 3412this Caterpillar engine homemade processor 2012/13ID John13644. Deere 200D 13841. Sam x702with a 10’ because is still new. ItemDiesel ID Replaced exhaust; Replaced FIREWOOD PROCESSORS with 850 HP. 5300 hrs. Mill incenter log deck. Has a hydraulic grapple, Excavator - This is still a like new 2014 JD 753J Feller Buncher - NEW! 2014 John Deere 643K - There’s 13935. Sam x702 2010 Shop Built and kicker that runs excavator with only 3000Wood hours. Processor - Treat as NEW! Onlychain 381 hours. not much to sayall about this off feller -Comes It has a 353 Detroit diesel, 40 of a 4 cylinder Mercedes power with a stationary rockland Standard warranty expired, but buncher. It’s still brand new out

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

Contact: Item ID: 14044 J Williams Ph: Contact:(888) Sam 401-6367 x701 Ph: (888) 401-6367 x702

processor. Item ID 13820. IDwell 13864. built Sam x702 Sam 2015 Johnx702 Deere 748L - This is

‘05 Gehl CTL 70 Item ID: JW-986495 Corley Complete ‘02 Prentice 490

‘93 Barko 180B

pins; painted good condition. finished 10 84/85 JohnStraightened Deere 440B/C -Just Thisand panels; Changed all fluids and Acre clearing job, ready to work! skidder came in a box to Lavaco filters; Checked Remote control. production Power Co in Re-insulated Colorado and Big is a cab;

Ite Co Ph

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

‘98 611 Ex-Hydro good. Ax in good working order. 22in on injection pump. always started kohing head works great. Item head. ID: 13948 Item ID 13185. Sam x702 Contact: Austin

1999 - new engine Ph:Barko (888)160D 401-6367 x703 with approximately 1500 hours. Hour

meter dont work. The last 2 owners ID 13438. Sam x702 have only used it to load trucks or 2007 TimberPro 810 Combi as a backup as needed. Has a CTR

Machine Forwarder uprebuilt. but delimber,-grapple hasset been comes with rebuilt Log Max leaks. 750 Boom cylinders have minor processing head. Less than 5200 Item ID 13694. Sam x702 total hours. Runs very Has 94 Barko 275 - Excellentwell. value

blade andatplumbed a clam with low hours atfor 3,500. 5.9 bunk. New swing gear box. Quick CUMMINS continuous grapple.

attach in 15 min. Runs Great!. ItemtoIDswitch 13740.head Samto grapple. Cummins 6.7 QSB engine. x702 260HP. OptionalBELL Tracks on all

bogies adds $10,000. Item IDhas 13501. 1990 Bell Super T - This Bell Sam x702 a brand new Duetz engine. Lever

‘99 51

Ite Co Ph

Run

shift

at 13

main 24”

year

hyd

Roll

com

retir

Item

2006

Har

hou

with and

for h

bogi

from

man top

new

1343 2010 TimberPro II control, 33” bar, 725B pumpw/Rolly and tranny and fixed wiring as needed. Item Processor - Super Clean Machine.  Issue Lumbermens 1986 ❘ 386 List  seLL exchange  buy  save ❘  LumbermensCO.com  Issue 364 364 Lumbermens  since 1986 ™❘  since List  seLL  exchange buy  save ❘ Lumbermensmagazine.com  Issue 364 Lumbermens  since 1986 ❘  List  seLL  exch

inch circle saw, foot Warranty unit. Has a 4’ chain saw thumb insert that can betooth adjusted has30 Extended on Major of the box with onlythat 1452 kicks hours.


**

IntegrIty • PrecIsIon • QualItyCALENDAR** • Value

Woodmaster

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

Tree See why The we are your BeSt Source for bandsaw blades!

Hot Springs, Arkansas www.arkloggers.com

that Started We offer the highest quality welds and our people use the it All!

highest level of integrity and precision to give you the best 72ND ANNUAL GREAT LAKES Since 1986, Lumbermens has & HEAVY EQUIPMENT EXPO bandsaw blades in the business—we ship all over the LOGGING US. published a monthly circular Wood-Mizer LT40 Thurs, 7 Sept - Sat, 9 Sept Satisfaction reaching sawmills, loggers, always guaranteed! Escanaba, Michigan Item ID: 13995

pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Woods Publishing

Contact: Austin MID-ATLANTIC LOGGING & BIOMASS Ph: (888) 401-6367 x703 Fri, 15 Sept - Sat, 16 Sept

thIn Kerf MID-ATLANTIC

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MARKETING DIRECTOR John Williams (888) 401-6367 ext. 701 j@lumbermens.co

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Ask About Our Fri, 15 Sept - Sat, 16 Sept Dismanteling Blades Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

1-888-857-5153

DESIGN DIRECTOR

ck Donna Heninger Cheut Our Quality • O

EQUIPMENT REPS

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

Band saw Blades

THE PAUL BUNYAN SHOW

Our Service • Our Price Fri, 6 Oct - Sun, 8 Oct

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

‘06 Western Star AD SUBMISSIONS May be sent to­ Michigan Special morris@lumbermens.co

Item ID:POSTMASTER 14011 Contact: Austinchanges to: Send address Lumberman's Exchange Ph: (888) 401-6367 x703 P.O. Box 1916 Columbia, TN 38402

x702 The Lumberman's Exchange is

published Woods 2004 Hydromonthly Ax 470 by - This cutter

Publishing, P.O. Box 1916, has around TN 7000 hours. a clean Columbia, 38402. All It’s rights reserved. All editorial/ advertorial and tight machine. Only reason submissions are used at the selling is due to an upgrade. discretion of the publisher andItem may be edited for purposes of clarity ID 13846. Sam x702 and space. Although all efforts have 2004 Axensure 670 - accuracy Engine has beenHydro made to of content submitted by advertisers about 500 hours, new saw motor and writers, the Lumberman's Exchange, principles and owner and disc lastitsyear. Previous associates, are not held liable for had theor hydrastats This errors omissions.redone. Reproduction, in whole or part, is prohibited with­is has a 22” high capacity head and out written consent. a very clean©2017 machine. Mounted on Woods Publishing

Cambridge, Ohio ‘89 Timberjack 380A www.ohioforest.org

Item ID: 14039 Contact: Austin Ph: (888) 401-6367 x703

** INFO LINK** 13799. Sam x702

B & B Mfg. ............................... 18 B. H. Payne .............................. 16 Baker ...................................... 5, 7 ‘08 John Deere Bell's Machining ..................... 27 CT332 Brute Force Mfg. ..................... 31

1998 Hydro 611EX Saw Head M&F GaugeAx ............................. 28 Feller Buncher - with about 8800 Meadows Mill, Inc. ................ 33 hours. Bunching Saw Head has Menominee Saw ..................... 29 large pocket for accumulation and Metal Detector's Inc. .............. 30 lifting side shield for notching Midwest Sharpening .............. 26 larger trees before felling.

Item ID: 13855 Buck Equipment bark .....................................9 Contact: Sam (AIM) ........ 36 Mor Cummins engine. 28L tires at 60%. Ph: (888) 401-6367 x702 Decent running condition. Item12ID Corley Mfg .............................. 32 Multitek ................................... CRD Metalworks .................... 25 HydroAx 611B - New injectors, CW Mill-ArmorHog .............. 17 injector pump. New 5.9 cummins CW Mill-Hogzilla ................... 15 engine. Rebuilt hydraulic pump Dyna Products ........................ 35 and new teeth. Item ID 13768. Sam Empire Hydraulics ................... 8 x702 Great Lakes 511EX Mfg. .................... 34 1999 Hydroax - New

13245. Sam Piper's Sawx702 Shop.................... 13 2002 Hydro Ax 621E - Arouund40 Rotochopper............................

hours. just replaced HurstCaterpillar Boiler .............................14 gear box to hydraulics at the end21 Iron Bull ...................................

hours ago; 8750 hours; Quadco Thomas Industrial Controls ..... 10

Hahn Machinery ...................... cummins engine with only 1500 3

of summer. 11000 hours total on Kilgore Saw ............................. 22 cutter. Tires are 28L’s @ 80%, 2 Lignomat ................................. 24 @ 40% and one slick. Brand new

12,000 hours on this machine. Row Electric ............................ 20 Working daily. Item ID 13884. Sawmill Exchange .................. 11 Austin x703 Select Sawmill ......................... 19 1998 711EX Saw Head Feller Smith Sawmill ........................... Buncher - 30.5-32 tires at 40%; 4 The Paul Bunyan Show ......... Cummins Engine rebuilt 1500 39

22” Large treeSaw saw& head. Heat Union Grove Knife .. 2, and 37 A/C work. New bearings in saw. Universal Refiner ................... 23 Cutting trees today. Item ID 13353. WoodMizer ................................ l Sam x702

KMC 34’s with 50% tread. Item ID 13828. center section. 20” single post - USED FORESTRY EQUIPMENT FOR SALE  SELL YOUR EQUIPMENT TODAY TODAY ❘ 0  24/7 SUPPORT SALE ❘ l§ SUPPORT KMC Track Skidder 2500P Sam x702 head. Heat and air work. Item ID

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly

84/85 John Deere has been rebuilt, it has a 24foot in 440B/C 10 hours on this machine since it

feed deck foot out feed deck Item ID:20 13908

Contact: with 44 inchSam wheels, and all the

Ph: (888) 401-6367 bells and whistles, its a x702 production

machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses. Item ID 13876. Austin x703 S & W 125 Band Mill with

‘90 Bell Super T

Caterpillar generator - Low hours on the mill, electronic computer Set Item ID: 13896

Contact: works,1 1/2"Sam or 2" band, 22ft. track Ph:3406 (888) 401-6367 Cat 140KW Genset,x702 12,400

hours ready to run. Item ID 13434. Sam John x702 Deere Dual Arch Grapple,

CARRIAGES & DRIVES John Deere winch, Model 4000, 2010 Cardinal HD Carriage Cummins Engine, Model 6BTA,

Carriages (Sawmill)28000. - Cardinal Clark Transmission Item ID Carriage line it includes carriage 13738. Austin x703 with onboard log turners, carriage

KOMATSU

drive, hyd pac for carriage, 2007 Komatsu PC220LC w/2009 sawyers cab, computer controls, Log Max 7000XT processing head. cabinet with electronic drives for 9700 hours on carrier. 7200 hours carriage knees, husk including on Log Max. Excavator style. Cab 48" bottom saw and 36" top saw guard. Flotation pads. One owner.

Very good condition. Item ID

STACKING RAC

13464. Sam x702

2008 Komatsu D61-EX Dozer

- Great Condition. 4511 Hours.

Komatsu U/C at 95%. 35% Pads. 6

Way Blade. Fully Enclosed comfort cab. Great price!. Item ID 13570. Sam x702

2012 Komatsu D61EX 15 Dozer with only 750 Hours. Triple

Rippers; Limb Sweeps; Enclosed cab with Heat/AC; 6 way blade; Undercarriage at 90%; Excellent www.BakerProducts.net Condition!. ItemI S73.663.7711 ID 13459. Sam 800.S48.6914

x702 ❘ L!  (888) 401-MENS NO. 17 401-MENS 2014 Komatsu 450 - Only 1100


“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

Marmon Picker Truck & Pup Trailer

Item ID: 92152

1995 Marmon 425 hp Cat engine, 18 speed transmission, 46k rear, 6 axle tag and two,rubber block suspension (hendrickson), 1995 Prentice 120E loader, 1999 express 5 axle pup trailer, spring suspension (reyco) newer turntable with very little hours, bushings and bearings redone and good, newer breaks. Front tires about 85% and the rest are all about 70% all good tires.

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

Risley Rolly 3 Item ID: 2390

2016 Risley Rolly 3, LIKE NEW! It also comes with a NEW 13428 Victory Ln. // PO Box 124 Woodland computer! Ready to work as soon as you are. Adams Center, NY 13606 Contact: WES Email: Wes@lumbermensco.com Phone: 888-401-6367 EXT 710 OR 260-452-6055

B U Y S H O T

Price $45,000

11,400 frame hours. Engine just professionally rebuilt 500 hours ago. New transmission was put in at 10,000 hours.

‘05 Gehl CTL 70

Contact: AUSTIN Email: Austin@lumbermensco.com Item ID: JW-986495 Phone: 888-401-6367 EXT 703 OR 931-797-8029

Contact: J Williams Ph: (888) 401-6367 x701

2013 John Deere 748H

Around 7000 hours, new back tires, was pulling 10-12 Item ID: 14073 loads a day before mill shut down. 20,000lb goose neck trailer. Item ID Contact: Austin 13916. Austin x703 Ph: (888) 401-6367 x703Contact: AUSTIN Email: Austin@lumbermensco.com Best ValueEXT Portable Log Splitter Phone: 888-401-6367 703 OR 931-797-8029

made the best valued log splitter.

but electronic option is available.

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702

Item 13644.540G3 Sam x702 JohnIDDeere Cable skidder

Firewood - This is a JD Processor 437D loader Item ID: 35922 homemade processor with a 10’

2012 John Deere G3 540 Log Skidder, well maintained, good 2010 Shop Built Wood Processor

start a new job that fell through selling everything. chain and kicker thatsoall runs off

in excellent condition. Runs great.

FIREWOOD PROCESSORS Item ID: 15324

condition, 7000 hours. For more info and pics please call or - text It has a 353 Detroit diesel, 40 Contact: MARK inch tooth circle saw, 30 foot Email:insert Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 OR 702-875-2703

 Issue 364 386

John Deere 540B

Item ID: 6075 Item ID: 14078 Trans re-built by John Deere (receipts avail.), new brakes, 8K frame Contact: Austin hrs, tires size capacity!. 18.4x 26, tight Item center ID section, motor Sam and hydraulic 13421. x702 Ph: (888) 401-6367 x703 pump re-done 2K hrs ago by John Deere, new winch drive shaft.

BARKO

Contact: JOE Email: Joe@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 709 OR 801-362-2170

off onto a conveyor. This is a very

knuckleboom, 30' boom, 75hp

Sam x702

grapple, 5,000 original hours.

motor, Rotobec continuous

When You Buy Your Circular Saws From B.H. Payne (excellent condition.). Item ID Firewood Processor - This is You’ve Bought the best... We Guarantee It! 13238. Chris x700 a Chomper Model 16 PDA

1995 Barko 775 B Feller Buncher Traditional Quality Combined - Pumps recently redone. 400 hrs With Todays Technology on injection pump. always started low hours. Control panel includes automatice firewood processor

with John Deere power unit with Quality Brand Reg. U.S. Pat Off

good. in752-0627 good working order. 22in Call 800

tach, oil pressure, water temp and

Sure To Ask For Our Free, Complete Saw Catalog kohing head. head works great. amp gauges. up to 16”. Saw Bits andCuts Shanks logsMake

Manufacture & Sell Inserted Tooth Headsaws, Item ID 13185. Sam x702Solid Tooth One owner and comesWe with all

Circular Knives Carbide Tipped Saws Inserted Tooth1999 CutoffBarko Saws &160D Carbide Saws.engine We alsowith Carbideand Strobereceipts. ® Saws Saws, - new manuals Purchased B.H. Payne & Company Stock & Sell Bits & Shanks, Carbide Tips, Diamond Wheels, approximately 1500 hours. Hour new for Item ID 13865. Saw$32,500. Manufacturers Knife Grinding Wheels, Saw Gumming Wheels & Knives.

Sam x702

meter dont work. The last 2 owners

50% or better. 475 hp Cummins

Item ID 13694. Sam x702

Diesel. 7500 Hours. One owner.

Handles logs up to 32”. Uses

Brewco Saws - Two Brewco Saws

Contact: Austin Ph: (888) 401-6367 x703

Has Log Lift. Uses 4-way wedge

quality chips with patented ‘Cone’

EDGERS & GANGS

‘13 KMC 2500 Track Skidder

13HP Honda motor. Manual start

- Small manufacturer in PA has

day. Item ID 13882. Austin x703

Phone: 888-401-6367 EXT 13920 709 OR 801-362-2170 Item ID:

Here’s What You Get With Every B.H. Payne have onlySaw used it to load trucks or LOGGING EQUIPMENT • Saws manufactured from only the Highest Quality AlloyHas Steel. as a backup Nickel as needed. a CTR BANDIT • Each Saw Milled with State-Of-The-Art Precision CNC Milling Machine. delimber, grapple has been rebuilt. 1999 Bandit 1900 Tracked Disc • We Tension Your Saw to Your RPM Speed BEFORE Leaving Our Factory. Boom cylinders have minor leaks. Chipper Cat Under- Carriage at Guaranteed. • Your -Satisfaction Completely

with 1700 hours, in very good

vans and produce 6 - 8 loads per

‘95 John Deere C6 Contact: JOETree Farmer Email: Joe@lumbermensco.com

Circular Saws

Item ID: 85729 chain conveyer, 8 way splitter, on

drum design. Can easily load 42’

8.7K frame hrs, dual arch grapple, new clutch, whole winch rebuilt, new drive shaft, tires size 24.5x32,center section tight, axles tight, motor and trans re-done by previous owner.

well built processor. Item ID 13820.

2012 John Deere 648H

condition. Easily produces high

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

John Deere 640

Item ID: 59341

‘83 John Deere 4850

‘93 Barko 180B

2013 deck. John Deere Knuckleboom grapple, loader. 9700 log Has437D a hydraulic hours. Excellent condition, woods ready. Purchased to

of a 4 cylinder Mercedes power Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 701 unit. Has a 4’ chainEXT saw that or (801) 319-9351

Lumbermens™  since 1986

kicks

B.H. Payne & Company, Inc.

Well maintained. Item ID 13294.

P.O. Box 90608 Sam x702 East Point, GA 30364 2004 Bandit Beast Model 4680 404 761-8711 3412 Caterpillar Diesel engine Fax 404 761-5398 with 850 HP. 5300 hrs. Mill in

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. “Since 1890”Just finished 10

1990 Bell Super T - This Bell has

Remote Big production E-mail:control. info@paynesaws.com

control, 33”www.paynesaws.com bar, pump and tranny Web Site:

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

 LumbermensCO.com

‘1

Ite Co Ph

‘0 Tr Lo

Ite Co Ph

War

Com

1050 and


** CALENDAR**

Morbark model 20 Chipharvester Item ID: 38035

Morbark model 20 Chipharvester 425 CAT 3 chipper knives Swing boom Grapple Closed in cab heat and AC grapple, 15ton machine, good blades, everything on it works as it should Call for more pictures!

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

SOUTHWEST FOREST PRODUCTS EXPO 2009 Valmet 840.4 Ford Altec Bucket Truck The Tree that Started it All!

Item ID: 347

Fri, 25 August Item - Sat,ID: 2679249 August

This 2004 bucket truck is in EXCELLENT condition! The truck has UNDER 60,000 miles on it! It has a regular bucket mounted on a 55’ Altec boom with a 60’ working height. The owner had the everything completely redone. It has the Forestry Package, dump box, Cummins diesel w/5-speed automatic, 2x4.

15000 frame hours but has Brand new hydro stats, and the Hot Springs, Arkansas running gears have been completely gone through. In excelwww.arkloggers.com lent condition, more info and pics available upon request.

AUSTIN 72ND Contact: ANNUAL GREAT LAKES Email: Austin@lumbermensco.com Contact: WES Email: Wes@lumbermensco.com Since 1986, Lumbermens has Phone: 888-401-6367 EXTEXPO 703 LOGGING & HEAVY EQUIPMENT Phone: 888-401-6367 EXT 710 OR 260-452-6055 931-797-8029 published a monthly circular Thurs, 7 Sept - Sat, 9 Sept

reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

Fence Post Processing Operation

MID-ATLANTIC LOGGING Item ID: 42175& BIOMASS Fri, 15 Sept - Sat, 16 Sept Complete description and videos available online.

PUBLISHER

Woods Publishing MID-ATLANTIC

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

LOGGING & BIOMASS EXPO

Selma, North Carolina Contact: AUSTIN www.midatlantic-logging-biomass­ Email: Austin@lumbermensco.com expo.com/ Phone: 888-401-6367 EXT 703 OR 931-797-8029

2014 Tigercat 234B MARKETING DIRECTOR Item ID: 29966

Item ID: 12270

John Williams Has 7000(888) hours, 401-6367 can be sold withext. han fab circle saw. 701 Needs nothing to load wood. j@lumbermens.co

http://www.kfia.org/ 1995 Timberjack 450 DPG Skidder. Dual Arch Grapple,. Tires30.5x32;KentuckyWoodExpo.aspx 30% front, 40% rear. Power train rebuilt, overhauled Cummins 5.9 engine. Center loose. Reason for selling-Upgraded.

Contact: AUSTIN DESIGN DIRECTOR Email: Austin@lumbermensco.com Donna Heninger Phone: 888-401-6367 EXT 703 931-797-8029

Contact: Email: Teds@lumbermensco.com THETED PAUL BUNYAN SHOW Phone: 888-401-6367 EXT 701 or (801) 319-9351

Fri, 6 Oct - Sun, 8 Oct

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

Cat 518

AD SUBMISSIONS Item ID: 28404 May be sent to­

95U Series Serial number. Approximately 6000 hours. Workingmorris@lumbermens.co daily.

Contact: POSTMASTER AUSTIN Email: Austin@lumbermensco.com Send address changes to: Phone: 888-401-6367 EXT 703 Lumberman's Exchange 931-797-8029

2016 Lucas 1030 Portable Sawmill Item ID: 1861

** INFO LINK**

2016 Lucas 1030 portable sawmill. 30 hp gas motor, 10 in 20 in max cut, comes with slabbing attachment, bevel siding attachment ( never used), planer blade (never used), all manuals and tools that came with it new. Only 335 hours on machine.

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Saw ..................... 29 Baker ...................................... 5, 7 Menominee Dymax Skidsteer Tree Cutter

Bell's Machining ..................... 27

ID: 96694 MetalItem Detector's Inc. .............. 30

swing boom, enclosed heat/air, 1 owner, owner operator

machine, regular20 maintenance Call for more pictures! feed deck foot out feed deck

Contact: with 44MARK inch wheels, and all the Email: Mark@lumbermensco.com

Phone: 888-401-6367 EXT 708 OR 702-875-2703

bells and whistles, its a production

machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130

Cook 3238 feet a'08 minute also has CLTHD presses.

Sawmill Item Portable ID 13876. Austin x703 Item ID: 90653 S & W 125 Band Mill with

2008 Cook 3238 HD portable sawmill. 38 hp gas motor,

Caterpillar Low hours 32 in diameter loggenerator capacity, 21 foot- log length.

on the mill, Contact: TEDelectronic computer Set Email: Teds@lumbermensco.com

works,1 1/2" or 2" EXT band, Phone: 888-401-6367 701 22ft. track

or (801) 319-9351

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard turners, carriage Loglog Splitter drive, hydItem pac for ID:carriage, 46454

sawyers controls, Log Splitter. cab, This iscomputer a prototype small diameter

log splitter built at Darbyshire Machine shop in Anthony

NM. it was with made inelectronic 2010 and has 2drives hours use.for It is in cabinet perfect condition. Brand new. We were not able to use it

for the project we went a different direction. carriage knees, husk including

Contact: TED

Contact: TEDsaw and 36" top saw 48" bottom

Midwest Sharpening.............. 26

Email: Teds@lumbermensco.com

Phone: 888-401-6367 EXT 701 or (801) 319-9351 Buck Equipment (AIM) ........ 36 Mor bark .....................................9

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is CW Mill-ArmorHog Item ID: 47188 .............. 17 published monthly by Woods John Deere 440B skidder, LOTS of................... new parts, new CWcable Mill-Hogzilla 15 Publishing, P.O. Box 1916, winch cable. Columbia, TN 38402. All rights Dyna Products ........................ 35 reserved. All editorial/ advertorial Contact: WES submissions are used at the Email: Wes@lumbermensco.com Empire Hydraulics ................... 8 discretion of the publisher and Phone: may 888-401-6367 EXT 710 OR 260-452-6055 be edited for purposes of clarity Great Lakes Mfg. .................... 34 and space. Although all efforts have Hahn Machinery ...................... 3 been made to ensure accuracy of John Deere 640H Cable Skidder content submitted by advertisers Item ID: 6169 Hurst Boiler .............................14 and writers, the Lumberman's Exchange, its principles and 2011 John Deere 640H cable skidder, approx 12k frame hours, 28L's 2 Iron Bull ................................... 21 at approx 60% 2 approx 40% new John Deere motor last year, newer associates, are not held liable for transmission, machine completely gone through last year, used everyday, errors or omissions. Reproduction, blade cylinder has aKilgore leak and is bypassed, is not working, doors and glass Sawa.c. ............................. 22 come with, comes with pair of chains approx 90% has a hole in the seat in whole or part, is prohibited with­ Lignomat ................................. 24 out written consent. Contact: MARK Email: Mark@lumbermensco.com ©2017 Woods Publishing Phone: 888-401-6367 EXT 708 or 702-875-2703

Rotochopper............................ 40

John Deere 440B Cable Skidder

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Cat 527 Grapple Dozer

10 hours on this machine since it Item ID: 39840 has been rebuilt, it has aCat24foot in 2012 complete factory remanufactured, 527, 1500 hours,

Dymax Skidsteer Tree Cutter

Brute Force Mfg. ..................... 31

Corley Mfg .............................. 32

P.O. Box 1916 Columbia, TN 38402

Danckaert Band Resaw - Roughly

Row Electric ............................ 20 Sawmill Exchange .................. 11

Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

STACKING RAC

Select Sawmill ......................... 19 Smith Sawmill ........................... 4 The Paul Bunyan Show ......... 39

Grapple Thomas Industrial Controls..... 10 Item ID: 35810 Union Grove Saw & Knife.. 2, 37 Grapple with rotator.

Universal Refiner ................... 23 Contact: TED

Email: Teds@lumbermensco.com WoodMizer ................................ l Phone: 888-401-6367 EXT 701

 SELL YOUR EQUIPMENT TODAY TODAY l§

or (801) 319-9351

 24/7 SUPPORT 0 SUPPORT

Western Star Picker Truck Item ID: 60937

Western star picker truck and trailer, 10 speed Eaton trans. 3406 cat engine. Hendrix air ride suspension, 583,622 miles, good truck Call for more pictures, video and info! Contact: MARK www.BakerProducts.net Email: Mark@lumbermensco.com 800.S48.6914 S73.663.7711 Phone: 888-401-6367I EXT 708 OR 702-875-2703

❘ L!  (888) 401-MENS 401-MENS

NO. 19

B U Y S

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

BANDMILLS & HEADSAWS

H O T

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept '95 Timberjack 450 DPG Dual Arch Skidder Lexington, Kentucky

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com


Mobile Dimensions 128 Circle Saw Phone

“Precision Under Pressure”

Baker Notcher

315.284.4126 Item ID: 51560 Fax 2012315.849.2045 Model 128 Hydro Stat drive back n forth has 1835cc VW engine, has water injection system, has 24ft of carriage track (2) 10ft and (1) 4 ft section, Only tad over 400 hours Website have 4 - 30" blades n plenty of saw bits for blades n extra parts etc. Year 2012 Model 128 on heavy duty tandem axle trailer 16" tires. Has twin edger blades www.empirehyd.com to adjust from 11/2 inches to 12 inches according to what size lumber u want to cut, Also includesEmail new 18 1/2 edger blade n bits never used. info@empirehyd.com Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

Item ID: 49307

Baker Double Head Notcher: Serial number BN-094-041: This is a good used Baker Double-head notcher that is electrically powered. It has a 30hp electric motor for each head. It needs 3-phase power and can be run with either 230v or 460v.

Contact: WES Email: Wes@lumbermensco.com Phone: 888-401-6367 EXT 710 OR 260-452-6055

‘93 Barko 180B

‘16 Halverson H140 ID: 14077 KubotaItem KH191 w/ Hahn SG 140 Contact: Austin Item ID: 63798 Skidsteer (DEMO)Tree Processor

Barko 595Ml Tracked Item ID: 43774

2006 model has rotobec grapple. 11,500 hours. Woods ready. Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

x703 '94 Kubota KH191Ph: w/ Han(888) HSG 140 401-6367 Tree Processor. A good clean machine Item ID: JW-909632 that's been sitting for a while. Very few hours on rebuilt main pump. Tight pins. Undercarriage in excellent shape. The Hahn HSG140 Harvester Head is designed for cost effective means for harvesting small diameter timber and plantation thinning. Contact: J Williams Selling because retiring. Video available. Ph: (888) 401-6367 x701 Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

JD 650J LGP

2012 Barko 920 Forestry Mulcher

Item ID: 17326

Item ID: 47228

2011 John Deere 650J LGP with winch. 26” shoes. 5500 hours. Enclosed cab, heat and AC. Never in the woods, machine is in great condition and ready to work. Purchased to start a new project that fell through so selling everything.

‘95 John Deere C6 Farmer Contact: TEDTree Email: Teds@lumbermensco.com

2800 hours with Fecon BH200 Head

Baker Double End Trim Saw

13428 Victory Ln. // PO Box 124 Item ID: 49890 Adams Center, NY 13606 Contact: WES

Email: Wes@lumbermensco.com Phone: 888-401-6367 EXT 710 OR 260-452-6055

Phone: 888-401-6367 EXT 701 or (801) 319-9351

Rogers 4 Headblock Circle Mill Item ID: 23205

Rogers 4 headblock portable circle saw, 6 cylinder Deutz engine with 450 hours on motor and 783 hours on mill, log turner, infeed and outfeed 12' tall Fricks set works 48" blade Call for more pictures!

‘05 Gehl CTL 70

Contact: MARK Email: Mark@lumbermensco.com Item ID: JW-986495 Phone: 888-401-6367 EXT 708 or 702-875-2703

Contact: J Williams Ph: (888) 401-6367 x701

‘83 John Deere 4850

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

08’ John Deere 437C

2008 Modelchips Mountedwith on a Kodiak trailer, has hydraulic quality patented ‘Cone’ landing gear. Major components rebuilt within last 500 hrs. Engine rebuilt, pumps rebuilt, swing manifold reseal rebuilt, drum design. Can easily load 42’ And grapple swing motor rebuilt. Well maintained machine has 17000 frame hours.

vans and produce 6 - 8 loads per Contact: AUSTIN day. Item ID 13882. Austin x703 Email: Austin@lumbermensco.com Phone:EDGERS 888-401-6367 EXT 703 & GANGS 931-797-8029 Brewco Saws - Two Brewco Saws

automatice firewood processor Contact: AUSTIN Email: Austin@lumbermensco.com with John Deere power unit Phone: 888-401-6367 EXT with 703 931-797-8029 low hours. Control panel includes

Best Value Portable Log Splitter

Sam x702

Contact: AUSTIN new for $32,500. Item ID 13865. Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

made the best valued log splitter. Handles logs up to 32”. Uses

LOGGING EQUIPMENT BANDIT Timberjack 240

ID: 80318 1999Item Bandit 1900 Tracked Disc

Complete rebuild with -5.9 gearmatic 13HP Honda motor. Manual start Chipper CatCummins Underengine, Carriage at

winch, and brand new 23.1 tires. Has parts machine that

but electronic option is available. 50%asor better. 475 hp Cummins can be included well.

Diesel. 7500 Hours. One owner. Has Log Lift. Uses 4-way wedge Contact: AUSTIN

Email: Austin@lumbermensco.com adjustable to single two way. Great Well maintained. Item ID 13294. Phone: 888-401-6367 EXT 703 OR 931-797-8029

Value! PA. Item ID 12062. Sam x702

Processor This is a 42”Firewood Lumber Tiger- Circle

Tiger with Cleerman setworks. Almost everything, even the air FIREWOOD PROCESSORS log deck. a two hydraulic grapple, valves, has been rebuilt withinHas the last years. This sawmill comes complete - log deck, log turner, vertical edger, mill, , etc.

chain and kicker that all runs off

- It has a 353 Detroit diesel, 40Contact: WES of a 4 cylinder Mercedes power Email: Wes@lumbermensco.com

inch insert tooth circle saw, 30Phone: foot 888-401-6367 unit. Has EXT a 4’710 chain saw that kicks OR 260-452-6055  Issue 364 386

3600 hours in excellent shape.

in Arkansas a Chomper Located Model 16 PDA

manuals and receipts. Purchased

Item ID: 7894 with a 10’ homemade processor A complete 42 inch sawmill - ready to go! The sawmill is a Lumber

2010 Shop Built Wood Processor

Item ID: 83128 Firewood Processor - This is

tach, oil pressure, water temp and

- Small manufacturer in PA has

53095 high condition.Item EasilyID: produces

Item ID 13644. Sam x702

2015 John Deere 848L

Sam x702

20,000lb goose neck trailer. Item ID 13916. Austin x703

with 1700 hours, in very good $46,500

in excellent condition. Runs great.

well built processor. Item ID 13820.

2015 Cat 545D amp gauges. Cuts logs up to 16”. Item ID: 45196 chain conveyer, 8 way splitter,5100 on originalOne owner and section. comesWorking with all hours, good center daily.

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

Lumbermens™  since 1986

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

‘13 KMC 2500 Track Skidder

off onto a conveyor. This is a very

H O T

B U Y S

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine

1994 Barko 160B - Electric

2014 Vermeer WC 75hp 2300XL knuckleboom, 30' boom, Item ID: 99024 motor, Rotobec continuous

Whole Tree Chipper. 1500 hours. CAT C13 well., strong hydraulics. Chipper features wireless (excellent condition.). Item ID drum remote, smart feed and 23" capacity style chipper. Machine is in good shape. Feed 13238. x700 Includes extra knives. chain inChris good order.

grapple, original hours. engine with5,000 440 HP, runs and starts

1995 Barko 775 B Feller Buncher Contact: MARK Email: Mark@lumbermensco.com

-Phone: Pumps888-401-6367 recently redone. EXT 708400 hrs

702-875-2703

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

Morbark Trac delimber, grapple Stac has been rebuilt. Item ID: 64060 Boom cylinders have minor leaks. Has 60ft of Track running off of 3 phase power.

Item ID 13694. Sam x702 Contact: AUSTIN 94 BarkoAustin@lumbermensco.com 275 - Excellent value Email: Phone: 888-401-6367 EXT with low at hours at 3,500. 5.9703 931-797-8029 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam Hurdle Circle Saw Item ID: 76007 x702

80's Hurdle on piper/fricks carriage 2 headblock (could be made 3 headlock if with 850 HP. 5300 hrs. Mill in Mid buyer needs) , 52" saw, soft start switch, verticalBELL edger with new bearings and a new set of bearings, hydraulic dogs, live log deck, chain/hydraulic log turner, recently

rebuilt main pump, rebuilt carriage pump, $1,100Tfor-2This new blades on vertical 1990 Bell Super Bell hasedger good condition. Just finished 10 2 weeks ago, new setworks valve, 150 HP electric motor, 40 HP electric on edger, has

a dust conveyer, 250 kw Cummins generator, comes 1000 gallon fuel tank a brand new Duetz engine. Lever Acre clearing job, ready to work!

Contact: MARK Email: Mark@lumbermensco.com control, 33” bar, pump and tranny Remote control. Big production Phone: 888-401-6367 EXT 708 or 702-875-2703

 List  seLL  exchange  buy  save

 LumbermensCO.com


TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

John Deere 540B Item ID: 0908

Contact: SAM The Tree Email: Sam@lumbermensco.com that Started Phone: 888-401-6367 EXT 702

it All!

Boonville, New York www.starwebhosting.net/woodsmen/

Item ID: 8834

2005 Valmet Forwarder Woods840.2 Publishing Item ID: 66330

ADVERTISING SALES

Contact: MARK Morris Woods Email: Mark@lumbermensco.com (888) 401-6367EXT ext. Phone: 888-401-6367 708704 morris@lumbermens.co or 702-875-2703

MARKETING DIRECTOR

Item ID: 2476 EXPO SOUTHWEST FOREST PRODUCTS Fri, 25 August Sat, 26 August Contact:-SAM

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Email: Sam@lumbermensco.com Hot Springs, Arkansas Phone: 888-401-6367 EXT 702 www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

2007 Cat 517

Item ID: 60554 MID-ATLANTIC

LOGGING & BIOMASS EXPO

Selma,John NorthDeere Carolina 540D www.midatlantic-logging-biomass­ Item ID: 5613 expo.com/

Contact: SAM Contact: AUSTIN Email: Austin@lumbermensco.com Email: Sam@lumbermensco.com WOOD EXPO Phone: 888-401-6367 EXT 703 KENTUCKY Phone: 888-401-6367 EXT 702 931-797-8029 Fri, 15 Sept - Sat, 16 Sept

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS 2009 2384 Prentice Sam Wall Knuckleboom Loader (888) 401-6367 ext. 702

83’ John Deere 740A

Contact: MARK Austin Woods Email: Mark@lumbermensco.com (888) 401-6367EXT ext. Phone: 888-401-6367 708703 austin@lumbermens.co or 702-875-2703

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

Komatsu PC290LC Loader Send address changes to: Item ID: 94744

Lumberman's Exchange

Contact: MARK P.O. Box 1916 Email: Mark@lumbermensco.com Columbia, TN 38402 Phone: 888-401-6367 EXT 708 The Lumberman's or 702-875-2703 Exchange is

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers Timberjack 230 Cable Skidder and writers, the Lumberman's Item ID: 51788 Exchange, its principles and associates, are not held liable for Contact: TED errorsTeds@lumbermensco.com or omissions. Reproduction, Email: Phone: 888-401-6367 EXT 701with­ in whole or part, is prohibited or (801) 319-9351 out written consent. ©2017 Woods Publishing

Item ID: 95074

Cambridge, Ohio www.ohioforest.org

2017 Tigercat 630E Item ID: 84473

** INFO LINK**

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

'96 CAT 515 Log Skidder

BANDMILLS & HEADSAWS Item ID: 7534

Danckaert Band Resaw - Roughly Contact: SAM 10 hoursSam@lumbermensco.com on this machine since it Email: Phone: 702 has been 888-401-6367 rebuilt, it has a EXT 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel

Franklin Q80 Grapple Skidder

is supported onID: both sides. This Item 55955

isContact: an extremely accurate machine MARK Email: Mark@lumbermensco.com in ve1y good condition, Phone: 888-401-6367 EXTCuts 708 130 a minute or 702-875-2703 feet also has CLT presses. Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702 2003 Tigercat 250 Log Loader Item ID: 46268

CARRIAGES & DRIVES

Contact: WALKER 2010 Cardinal HD Carriage Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 Carriages (Sawmill) - Cardinal

Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

720E Tigercat Feller Buncher Serco 170A Self Propelled Loader Buck Equipment (AIM) ........ 36 Mor bark .....................................9

Item ID: 44546 Corley Mfg .............................. 32 Contact: MARK Email: Mark@lumbermensco.com CRD Metalworks .................... 25 Phone: 888-401-6367 EXT 708 CW Mill-ArmorHog or 702-875-2703 .............. 17

Item ID: 57111 Multitek ................................... 12 Contact: AUSTIN Email: Austin@lumbermensco.com Piper's Saw Shop.................... 13 Phone: 888-401-6367 EXT 703 931-797-8029 Rotochopper ............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler .............................14 Cat D5H LGP Item ID: 64808 Iron Bull ................................... 21 Contact: AUSTIN Kilgore Saw ............................. 22 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 ................................. 24 Lignomat 931-797-8029

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Thomas Controls437D ..... 10 2013Industrial John Deere Item ID: 96805 Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN Universal Refiner ................... 23 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 WoodMizer ................................ l 931-797-8029

 SELL YOUR EQUIPMENT TODAY TODAY l§

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom and 36" top saw Logsaw Max 7000 Item ID: 96628

STACKING RAC

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Tigercat 630C Item ID: 83971

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net 931-797-8029 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 21

L O G G I N G

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Item ID: 83019 sam@lumbermens.co

Caterpillar

John Deere 437D Log Loader

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com


TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

1997 Timberjack 460 Cable Skidder

Timberjack 460 Dual Arch Item ID: 91657

Item ID:24393

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

Contact: FERY Email: Fery@lumbermensco.com Phone: (888) 401-6367 ext.705 or (801) 699-8784

Phone: 888-401-6367 EXT 708 Item ID: JW-909632 or 702-875-2703 Contact: J Williams Ph: (888) 401-6367 x701

Timberjack 230 Cable Skidder

Item ID: 59500

Item ID: 37092

L O G G I N G

Item ID: 20426 ‘16 Halverson H140 Contact: MARK(DEMO) Skidsteer Email: Mark@lumbermensco.com

Clark 667

Tree Farmer Grapple - Cable Skidder Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

Zaxis 200 Forestry Tracked Loader

Contact: FERY Email: Fery@lumbermensco.com Phone: (888) 401-6367 ext.705 or (801) 699-8784

Item ID: 51788

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

Gehl R220 Skid Loader Item ID: 28551

Contact: WES Email: Wes@lumbermensco.com Phone: 888-401-6367 EXT 710 OR 260-452-6055

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 John Deere 550G Dozer Item ID: 85744

Contact: MARKin very good with 1700 hours, Email: Mark@lumbermensco.com condition. Easily produces Phone: 888-401-6367 EXT 708high or 702-875-2703 quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam x702 Hood 28000 Item ID: 18775 FIREWOOD PROCESSORS

2010 Shop Built Wood Processor Contact: AUSTIN Email: Austin@lumbermensco.com -Phone: It has a 353 Detroit diesel, 888-401-6367 EXT40703 931-797-8029 inch insert tooth circle saw, 30 foot  Issue 364 386

314 CTR Delimber Item ID: 71870

Contact: WES Email: Wes@lumbermensco.com Phone: 888-401-6367 EXT 710 OR 260-452-6055

‘05 Gehl CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. x703Skidder Dozer KMC Austin 210 Cable

well built processor. Item ID 13820.

John Deere 650 G LGP Dozer

Sam x702 Item ID: 44852

Firewood Processor - This is Contact: TED

Email: Teds@lumbermensco.com

aPhone: Chomper Model 16 PDA 888-401-6367 EXT 701

or (801) 319-9351

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased

Best ValueItem Portable Log Splitter ID: 54571

new $32,500. Item 2010for Timberjack 648 ID HTC13865. Skidder Item ID: 57023 Sam x702

13HP Honda motor. Manual start

Chipper - Cat Under Carriage at

-Contact: Small manufacturer in PA has MARK Email: Mark@lumbermensco.com made the888-401-6367 best valuedEXT log708 splitter. Phone: or 702-875-2703 Handles logs up to 32”. Uses but electronic option is available. Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade a 10’ Johnprocessor Deere with 437D Itema ID: 10075 grapple, log deck. Has hydraulic

chain and kicker that all runs off Contact: AUSTIN Email: Austin@lumbermensco.com of a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 703 931-797-8029 unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

Contact: MARKEQUIPMENT LOGGING Email: Mark@lumbermensco.com BANDITEXT 708 Phone: 888-401-6367 or 702-875-2703 1999 Bandit 1900 Tracked Disc 50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 -

John Deere 648G3 Dual 3412 Caterpillar engine GrappleDiesel Skidder with 850 HP. 5300 Mill in Item ID:hrs. 74548

good condition. Just finished 10 Contact: FERY Email: Fery@lumbermensco.com

Acre clearing job, ready to work! Phone: (888) 401-6367 ext.705 (801) 699-8784 Remoteor control. Big production

 List  seLL  exchange  buy  save

KMC 210 Grapple 180B Dozer w/Winch ‘93 Barko Item ID: 67293 Item ID: 14077

Contact: Contact:MARK Austin Email: Mark@lumbermensco.com Ph: (888) 401-6367 Phone: 888-401-6367 EXTx703 708 or 702-875-2703

‘95 John Deere C6 KMC 2400 Grapple/winch ID: 83802 TreeItem Farmer

Contact: TED ItemTeds@lumbermensco.com ID: 13920 Email: Phone: 888-401-6367 Contact: Austin EXT 701 or (801) 319-9351

Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

'70 Allis Chalmers HD6 Dozer

grapple, 5,000 hours. Itemoriginal ID: 60357

(excellent condition.). Item ID Contact: TED

Email: Teds@lumbermensco.com

13238. x700 Phone:Chris 888-401-6367 EXT 701

or (801) 319-9351

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

2010 Timberjack 648 HTC Skidder

meter dont work. last 2 owners Item ID:The 57023 have only used it to load trucks or Contact: MARK Email: Mark@lumbermensco.com as a backup as needed. Phone: 888-401-6367 EXTHas 708a CTR orgrapple 702-875-2703 delimber, has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam

x702 CMI C400L Crawler Stump Grinder Item BELL ID: 93961 Contact: MARK 1990 Bell Super T - This Bell has Email: Mark@lumbermensco.com aPhone: brand new Duetz 888-401-6367engine. EXT 708Lever control, 33” or 702-875-2703 bar, pump and tranny ❘

 LumbermensCO.com


TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

Tigercat T240B Item ID: 4266

Contact: AUSTIN The Tree Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 that Started 931-797-8029

it All!

Boonville, New York www.starwebhosting.net/woodsmen/

John Deere 540G3 Item ID: 92115

Contact: AUSTIN Contact: TED Email: Austin@lumbermensco.com Hot Springs, Arkansas Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 701 www.arkloggers.com 931-797-8029 or (801) 319-9351

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Woods Tigercat 630Publishing C Dual Arch

Item ID: 10836

ADVERTISING SALES

Contact: TED Morris Woods Email: Teds@lumbermensco.com (888) 401-6367EXT ext.701 704 Phone: 888-401-6367 or (801) 319-9351 morris@lumbermens.co

Timberjack 450C Grapple/Winch SOUTHWEST FOREST PRODUCTS EXPO Item ID: 63798 Fri, 25 August - Sat, 26 August

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Selma, North Carolina BARKO 495ML Timbco 425B www.midatlantic-logging-biomass­ Item ID: 33905 Item ID: 74779 MID-ATLANTIC

LOGGING & BIOMASS EXPO

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS

Sam Wall 1991 Timberjack 450B (888) 401-6367 ext. 702 Item ID: 1826 sam@lumbermens.co

Valmet Forwarder

Contact: AUSTIN Austin Woods Email:(888) Austin@lumbermensco.com 401-6367 ext. 703 Phone: 888-401-6367 EXT 703 austin@lumbermens.co 931-797-8029

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

John Deere 650G to: Send address changes Item ID: 30113 Lumberman's Exchange Contact: MARK P.O. Box 1916 Email: Mark@lumbermensco.com Columbia, TN 38402

Phone: 888-401-6367 EXT 708 or 702-875-2703

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Timberjack Exchange, its principles380C and Item ID: 72259 associates, are not held liable for errors or omissions. Contact: WALKERReproduction, in whole or part, is prohibited with­ Email: Walker@lumbermensco.com out written consent. Phone: 888-401-6367 EXT 707 ©2017 Woods Publishing

Item ID: 42041

Cambridge, Ohio www.ohioforest.org

Timbco 445 EXL Item ID: 87930

** INFO LINK**

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

1988 John Deere 540D

BANDMILLS & HEADSAWS Item ID: 727

Danckaert Resaw - Roughly Contact: Band AUSTIN Email: 10 hoursAustin@lumbermensco.com on this machine since it Phone: 888-401-6367 EXT 703 been rebuilt, 931-797-8029 has it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel

Log Loader/ Excavator 225 LC

is supported onID: both sides. This Item 51519

isContact: an extremely accurate machine FERY Email: in ve1yFery@lumbermensco.com good condition, Cuts 130 Phone: (888) 401-6367 ext.705

or feet a minute(801) also699-8784 has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

2008 Barko 495 ML

Sam x702 Item ID: 7648

CARRIAGES Contact: AUSTIN& DRIVES Email: Austin@lumbermensco.com 2010 Cardinal HD Carriage Phone: 888-401-6367 EXT 703 931-797-8029 Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

CW Mill-ArmorHog .............. 17

Cat 525C Grapple Skidder Mor bark .....................................9 Item ID: 47830 Multitek ................................... 12 Contact: MARK Email: Mark@lumbermensco.com Piper's Shop.................... Phone:Saw 888-401-6367 EXT 708 13 or 702-875-2703 Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler .............................14 Vermeer SC372 Stump Grinder

Thomas Industrial Controls..... 10

Excavator 330Lx Link........ Belt36 Buck Equipment (AIM) Item ID: 70897 Corley Mfg .............................. 32

Contact: FERY Email: CRDFery@lumbermensco.com Metalworks .................... 25 Phone: (888) 401-6367 ext.705 or (801) 699-8784

Item ID: 15150 Iron Bull ................................... 21 Contact: MARK Email: Mark@lumbermensco.com Kilgore Saw ............................. 22 Phone: 888-401-6367 EXT 708 ................................. 24 Lignomat or 702-875-2703

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

'87 CAT 518 Cable Skidder

with onboard log turners, carriage drive, hyd pac for carriage,

48"Cat bottom and 36" top saw 508saw Cable Skidder Item ID: 84481

STACKING RAC

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

John Deere 648E

Item ID:&21141 Union Grove Saw Knife.. 2, 37

Item ID: 6603

Contact: TED Universal Refiner ................... 23 Email: Teds@lumbermensco.com

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net 931-797-8029 800.S48.6914 I S73.663.7711

Phone: 888-401-6367 EXT 701

WoodMizer l or................................ (801) 319-9351

 SELL YOUR EQUIPMENT TODAY TODAY l§

 24/7 SUPPORT 0 SUPPORT

❘ L!  (888) 401-MENS 401-MENS

NO. 23

L O G G I N G

MARKETING DIRECTOR

expo.com/

Contact: JOE Email: Joe@lumbermensco.com KENTUCKY WOOD EXPO Phone: 888-401-6367 EXT 709 Sept OR 801-362-2170 Fri, 15 - Sat, 16 Sept

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com


TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

CAT 518 (’88) Item ID: 90569

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

2001 John Deere 435 Item ID: 7100

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

JD 640 (’80)

Tigercat 845

Item ID: 93988

L O G G I N G

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

Item ID: 8139

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Cat D4C LGP Forestry Dozer

Item ID: 99373 ‘16 Halverson H140 Contact: MARK Skidsteer (DEMO) Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 Item ID: JW-909632 or 702-875-2703 Contact: J Williams Ph: (888) 401-6367 x701

Timberpro 620 Item ID: 79674

Contact: AUSTIN Email: Austin@lumbermensco.com ‘13 KMC 2500 EXT Track Phone: 888-401-6367 703 931-797-8029

Skidder

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

JD 540A (‘76) Item ID: 3526

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

John Deere 650K XLT

Item ID: 480 with 1700 hours, in very good Contact: AUSTIN Email: Austin@lumbermensco.com condition. Easily produces high Phone: 888-401-6367 EXT 703 931-797-8029 quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

210E Item IDPrentice 13644. Sam x702 Item ID: 8256 FIREWOOD PROCESSORS

Contact: JOE 2010 Shop Built Wood Processor Email: Joe@lumbermensco.com 888-401-6367 EXT40709 -Phone: It has a 353 Detroit diesel, 801-362-2170 inch insert tooth circle saw, 30 foot  Issue 364 386

John Deere 650J XLT Item ID: 5109

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 ‘05 Gehl 931-797-8029 CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703 BELL TRACKED (1993) Item ID: 54265 Best Value Portable Log Splitter JOE -Contact: Small manufacturer in PA has Email: Joe@lumbermensco.com made the888-401-6367 best valued logEXT splitter. Phone: 709 801-362-2170 Handles logs up to 32”. Uses

13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

JD processor 460 (1997) homemade with a 10’

Item ID: 1095 log deck. Has a hydraulic grapple, Contact: JOE chain kicker that all runs off Email:and Joe@lumbermensco.com Phone: 888-401-6367 709 of a 4 cylinder MercedesEXT power 801-362-2170 unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

well built processor. Item ID 13820.

VALMET 840.2 FORWARDER

Sam x702 Item ID: 9770 Firewood Contact:Processor AUSTIN - This is Austin@lumbermensco.com aEmail: Chomper Model 16 PDA Phone: 888-401-6367 EXT 703 931-797-8029 automatice firewood processor with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased new forPrentice $32,500. Item2190 ID 13865. Item ID: 28889 Sam x702

LOGGING EQUIPMENT Contact: AUSTIN Email: Austin@lumbermensco.com BANDIT EXT 703 Phone: 888-401-6367 931-797-8029 1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 -

3412 Diesel engine JohnCaterpillar Deere 548G2 Grapple Skidder Item ID:hrs. 34791 with 850 HP. 5300 Mill in Contact: MARK good condition. Just finished 10 Email: Mark@lumbermensco.com Phone: 888-401-6367 EXTto 708 Acre clearing job, ready work! or 702-875-2703 Remote control. Big production

 List  seLL  exchange  buy  save

CAT 525C ‘93 Barko 180B Item ID: 4091 Item ID: 14077

Contact: Contact:AUSTIN Austin Email: Austin@lumbermensco.com Ph: (888) 401-6367 x703 Phone: 888-401-6367 EXT 703 931-797-8029

‘95 John C6 Excavator w/RyanDeere DS 28 Felling Head ID: 76226 TreeItem Farmer

Contact: TED ItemTeds@lumbermensco.com ID: 13920 Email: Phone: 888-401-6367 Contact: Austin EXT 701 or (801) 319-9351

Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

Prentice 180

grapple, 5,000 hours. Itemoriginal ID: 7822

(excellent condition.). Item ID Contact: AUSTIN Email:Chris Austin@lumbermensco.com 13238. x700 Phone: 888-401-6367 EXT 703 931-797-8029 1995 Barko 775 B Feller Buncher - Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with

approximately 1500 hours. Morbark 30XLHour Item ID: 13937 meter dont work. The last 2 owners Contact: MARK have only used it to load trucks or Email: Mark@lumbermensco.com as a backup as needed. Phone: 888-401-6367 EXTHas 708 a CTR orgrapple 702-875-2703 delimber, has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

Hydro Ax 611E Item BELL ID: 58544

1990 Bell Super T - This Bell has Contact: AUSTIN Email: Austin@lumbermensco.com aPhone: brand new Duetz engine. 888-401-6367 EXTLever 703 931-797-8029 control, 33” bar, pump and tranny ❘

 LumbermensCO.com


TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

John Deere 548D Item ID: 64196

Contact: AUSTIN The Tree Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 that Started 931-797-8029

it All!

Boonville, New York www.starwebhosting.net/woodsmen/

‘14 Barko 595

Item ID: 14185 EXPO SOUTHWEST FOREST PRODUCTS Contact: MARK Fri, 25 August Sat, 26 August Contact: AUSTIN Email: Mark@lumbermensco.com Email: Austin@lumbermensco.com Hot Springs, Arkansas Phone: 888-401-6367 EXT 708 Phone: 888-401-6367 EXT 703 or 702-875-2703 www.arkloggers.com 931-797-8029

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

TimbcoWoods 425 Feller Buncher Publishing Item ID: 91441

ADVERTISING SALES

Contact: TED Morris Woods Email:(888) Teds@lumbermensco.com 401-6367EXT ext.701 704 Phone: 888-401-6367 or (801) 319-9351 morris@lumbermens.co

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept Selma, North Carolina JD 337E (2016) www.midatlantic-logging-biomass­ Item ID: 34479 expo.com/

John Deere 650H Item ID: 50512

MID-ATLANTIC

LOGGING & BIOMASS EXPO

Contact: AUSTIN Contact: JOE Email: Austin@lumbermensco.com Email: Joe@lumbermensco.com WOOD EXPO Phone: 888-401-6367 EXT 703 KENTUCKY Phone: 888-401-6367 EXT 709 931-797-8029 Sept801-362-2170 Fri, 15 - Sat, 16 Sept

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS

Sam Wall '93(888) John Deere 401-6367 ext.548E 702 Item ID: 14184 sam@lumbermens.co

Contact: AUSTIN Austin Woods Email:(888) Austin@lumbermensco.com 401-6367 ext. 703 Phone: 888-401-6367 EXT 703 austin@lumbermens.co 931-797-8029

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

‘14 John Deere 843K Send address changes to: Item ID: 14236

Lumberman's Exchange

Contact: MARK P.O. Box 1916 Email: Mark@lumbermensco.com Columbia, TN 38402 Phone: 888-401-6367 EXT 708 or 702-875-2703

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers ‘14 John Deere 843K and writers, theID: Lumberman's Item 14236 Exchange, its principles and Contact: associates,MARK are not held liable for Email: Mark@lumbermensco.com errors or omissions. Reproduction, Phone: 888-401-6367 EXT 708 part, is prohibited with­ in wholeoror702-875-2703 out written consent. ©2017 Woods Publishing

Prentice 180 Item ID: 7822

Cambridge, Ohio www.ohioforest.org

Tigercat 615C Item ID: 17058

** INFO LINK**

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

07 Prentice 950B

Item ID: 5368 BANDMILLS & HEADSAWS

Danckaert Resaw - Roughly Contact: Band AUSTIN Email: Austin@lumbermensco.com 10 hours on this machine since it Phone: 888-401-6367 EXT 703 931-797-8029 has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel

09’ John Deere 700J

is supported onID: both sides. This Item 48601

isContact: an extremely accurate machine AUSTIN Email: Austin@lumbermensco.com in ve1y good condition, Cuts 130 Phone: 888-401-6367 EXT 703 a minute 931-797-8029 feet also has CLT presses. Item ID 13876. Austin x703

S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

96’ Hydro ax 611E

Sam x702 Item ID: 4654

CARRIAGES Contact: AUSTIN& DRIVES Email: Austin@lumbermensco.com 2010 Cardinal HD Carriage Phone: 888-401-6367 EXT 703 931-797-8029 Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Item.............................. ID: 52342 Corley Mfg 32 Contact: WALKER CRD Walker@lumbermensco.com Metalworks .................... 25 Email: Phone: 888-401-6367 EXT 707 CW Mill-ArmorHog .............. 17

Multitek ................................... 12 Contact: JOE Email: Joe@lumbermensco.com Piper's Saw Shop.................... 13 Phone: 888-401-6367 EXT 709 OR............................ 801-362-2170 40 Rotochopper

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Item ID: 20725 Iron Bull ................................... 21 Contact: AUSTIN Email: Austin@lumbermensco.com Kilgore Saw ............................. Phone: 888-401-6367 EXT 70322 931-797-8029 Lignomat ................................. 24

550KControls (2015)..... 10 ThomasJD Industrial Item ID: 92495 Union Grove Saw & Knife.. 2, 37 Contact: JOE Universal Refiner ................... 23 Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 WoodMizer ................................ l OR 801-362-2170

2011 437D John Deere TimberPro 735B Buck Equipment (AIM) ........ 36 Morbark .....................................9 Knuckle Boom Loader Item ID: 52609

Cat 517 Hurst Boiler .............................14

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw Franklin Q70 Item ID: 5458

STACKING RAC

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

‘15 John Deere 648L Item ID: 14237

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 www.BakerProducts.net or 702-875-2703 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 25

L O G G I N G

MARKETING DIRECTOR

'94 John Deere 548E

Item ID: 14238

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com


TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

JD 648 G3 Grapple Skidder

CMI C400L Crawler Forestry Mulcher

Item ID: 4572

Item ID: 88634 Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

Morbark 40/36 Whole Tree Chipper on Tracks Item ID: 35082

L O G G I N G

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

Prentice 2432 (’09) Item ID: 89885

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 801-362-2170

Item ID: 14033

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 848 G Grapple Skidder Item ID: 85843

with 1700TED hours, in very good Contact:

Email: Teds@lumbermensco.com condition. Easily produces high Phone: 888-401-6367 EXT 701 or (801) 319-9351

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Treefarmer C5D Item ID 13644. Sam x702Skidder Item ID: 17115 FIREWOOD PROCESSORS

Contact: TED Wood Processor 2010 Shop Built Email: Teds@lumbermensco.com 888-401-6367 EXT40701 -Phone: It has a 353 Detroit diesel, or (801) 319-9351 inch insert tooth circle saw, 30 foot  Issue 364 386

‘16 Halverson H140 Item ID: 11726 Skidsteer (DEMO) Contact: TED Email: Teds@lumbermensco.com Item 888-401-6367 ID: JW-909632 Phone: EXT 701 or (801) 319-9351

JD 848H (‘08) Item ID: 8810

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 CTL 70 ‘05 Gehl 801-362-2170

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703 Prentice

210 E

Franklin 155B Forwarder Item ID: 10700

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

‘13 KMC 2500 Track Skidder

Best ValueItem Portable Log Splitter ID: 98009

well built processor. Item ID 13820. Timberjack 450 C Cable Skidder Sam x702 Item ID: 5077 Firewood Processor - This is Contact: TED

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

2011 Cat 525C

log deck. Item Has a ID: hydraulic 26688 grapple,

chain and kicker that all runs off Contact: AUSTIN Email: Austin@lumbermensco.com of a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 703 931-797-8029 unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

CAT 140G grapple, 5,000 original hours. Item ID: 93592 (excellent condition.). Item ID Phone: (888) 401-6367 ext.705

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased

B

50% or better. 475 hp Cummins

Has Log Lift. Uses 4-way wedge

Contact: Item ID:AUSTIN 13920 Email: Austin@lumbermensco.com Contact: Austin EXT 703 Phone: 888-401-6367 Ph: (888) 931-797-8029 401-6367 x703

Contact: FERY

Phone: 888-401-6367 EXT 701 orfirewood (801) 319-9351 automatice processor

but electronic option is available.

13HP Honda motor. Manual start

‘95 John HydroDeere Ax 411 C6 Item ID: 98954 Tree Farmer

13238. Chris x700 Email: Fery@lumbermensco.com

Teds@lumbermensco.com aEmail: Chomper Model 16 PDA

Handles logs up to 32”. Uses

Email: Teds@lumbermensco.com made the best valued EXT log 701 splitter. Phone: 888-401-6367 or (801) 319-9351

931-797-8029

BARKO

LOGGING EQUIPMENT Contact: WALKER Email: Walker@lumbermensco.com BANDIT Phone: 888-401-6367 707 1999 Bandit 1900 TrackedEXT Disc

-Contact: Small manufacturer in PA has TED

Item ID: 14207

Item ID: 14077 Contact: AUSTIN Contact: Austin Email: Austin@lumbermensco.com Ph: (888) 401-6367 Phone: 888-401-6367x703 EXT 703

capacity!. Item ID 13421. Sam x702

off onto a conveyor. This is a very

new for $32,500. Item ID 13865. 1994 Timberjack 240 Item ID:74044 Sam x702

96’Barko John Deere 643D ‘93 180B

Contact: J Williams Ph: (888) 401-6367 x701

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

‘00 Timberjack 1110

Treefarmer C7T GM Grapple/Winch Skidder

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 -

'04 John Deere 700H 3412 Caterpillar Diesel engine

Item ID: 14187 with 850 HP. 5300 hrs. Mill in Contact: AUSTIN good condition. Just finished 10 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Acre clearing job, ready to work! 931-797-8029 Remote control. Big production

 List  seLL  exchange  buy  save

1995 Barko 775 Feller Buncher or (801)B699-8784

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

John Deere 648G3The Grapple meter dont work. last 2Skidder owners Item ID: 51014 have only used it to load trucks or Contact: MARK

Email: Mark@lumbermensco.com as a backup as needed. Has a CTR Phone: 888-401-6367 EXT 708

702-875-2703 delimber, grapple has been rebuilt.

Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

Ponsse Bear 6BELL Wheel Proccessor

Item ID: 18122 1990 Bell Super T - This Bell has Contact: MARK

aEmail: brandMark@lumbermensco.com new Duetz engine. Lever Phone: 888-401-6367 EXT 708

702-875-2703 control, 33” bar, pump and tranny

 LumbermensCO.com


TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

Timberjack 240D Item ID: 40272

Contact: AUSTIN The Tree Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 that Started 931-797-8029

it All!

Boonville, New York www.starwebhosting.net/woodsmen/

Item ID: 84253

BarkoPublishing 495B Woods Item ID: 44764

ADVERTISING SALES

Contact: AUSTIN Morris Woods Email:(888) Austin@lumbermensco.com 401-6367 ext. 704 Phone: 888-401-6367 EXT 703 morris@lumbermens.co 931-797-8029

SOUTHWEST FOREST PRODUCTS EXPO Contact:-MARK Fri, 25 August Sat, 26 August

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept Selma, Carolina 380A ‘89 North Timberjack www.midatlantic-logging-biomass­ Item ID: 14039 expo.com/

John Deere 648G3 Item ID: 58995

MID-ATLANTIC

LOGGING & BIOMASS EXPO

Contact: AUSTIN Contact: AUSTIN Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com WOOD EXPO Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 703 KENTUCKY Sept931-797-8029 931-797-8029 Fri, 15 - Sat, 16 Sept

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 Tigercat 604 Cable Skidder sam@lumbermens.co Item ID: 6552 Austin Woods Contact: MARK Email:(888) Mark@lumbermensco.com 401-6367 ext. 703 Phone: 888-401-6367 EXT 708 austin@lumbermens.co 702-875-2703

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

Send address changes to:

1998 Timberjack 360 Lumberman's Exchange Item ID: 8121

P.O. Box 1916 Columbia, TN 38402 Contact: WALKER

Email: Walker@lumbermensco.com Phone: 888-401-6367 EXTis707 The Lumberman's Exchange

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content by Bar advertisers '97 Hydrosubmitted AX-411 EX Saw Head and writers, theID: Lumberman's Item 98754 Exchange, its principles and associates,SAM are not held liable for Contact: errors or omissions. Reproduction, Email: Sam@lumbermensco.com in whole888-401-6367 or part, is prohibited with­ Phone: EXT 702 out written consent. ©2017 Woods Publishing

Timberjack 360C Grapple Skidder Item ID: 63219

Cambridge, Ohio www.ohioforest.org Timberpro TL735B Tracked Feller Buncher Item ID: 64107

** INFO LINK**

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703

TimberPro 725B

Item ID: BANDMILLS & 20976 HEADSAWS

Danckaert Band Resaw - Roughly Contact: JOE Email: Joe@lumbermensco.com 10 hours on this machine since it Phone: 888-401-6367 EXT 709

been rebuilt, OR 801-362-2170 has it has a 24foot in

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel

Cat D6M Dozer

is supported onID: both sides. This Item 71062

is an extremely accurate machine Contact: MARK

Email: in ve1yMark@lumbermensco.com good condition, Cuts 130 Phone: 888-401-6367 EXT 708

a minute 702-875-2703 feet also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. JD 648H (’08)

Sam x702 Item ID: 6051

CARRIAGES & DRIVES

Contact: JOE

Email: Joe@lumbermensco.com 2010 Cardinal HD Carriage Phone: 888-401-6367 EXT 709

OR 801-362-2170 Carriages (Sawmill) - Cardinal

Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Mid 90’s Husky Brute 335XL John Deere 1710D(AIM) Forwarder Buck Equipment Item ID: 94242 ........ 36 Morbark .....................................9 Item ID: 14088

Corley Mfg .............................. 32 Contact: MARK Email: Mark@lumbermensco.com CRD Metalworks .................... Phone: 888-401-6367 EXT 70825 CW Mill-ArmorHog 702-875-2703 .............. 17

Multitek ................................... 12 Contact: AUSTIN Email: Austin@lumbermensco.com Piper's Shop.................... 13 Phone:Saw 888-401-6367 EXT 703 931-797-8029 Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

2011 CAT 525C Hurst Boiler .............................14

Item ID: 14203 Iron Bull ................................... 21 Contact: AUSTIN Email: Austin@lumbermensco.com Kilgore Saw ............................. Phone: 888-401-6367 EXT 70322 931-797-8029 Lignomat ................................. 24

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Thomas Controls ..... 10 98’Industrial Prentice 410E Item ID: 14206 Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN Universal Refiner ................... 23 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 WoodMizer ................................ l 931-797-8029

 SELL YOUR EQUIPMENT TODAY TODAY l§

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom 36" top saw 648saw G and Skidder Item ID: 76963

STACKING RAC

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

John Deere 640D Item ID:63000

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 27

L O G G I N G

MARKETING DIRECTOR

Item ID: 25974

Contact: AUSTIN Email: Mark@lumbermensco.com Email: Austin@lumbermensco.com Hot Springs, Arkansas Phone: 888-401-6367 EXT 708 Phone: 888-401-6367 EXT 703 www.arkloggers.com 702-875-2703 931-797-8029

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Log Loader

Timbco 425Exl

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com


TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

JD 640D (’95) 2003 CAT 525B Item ID: 3800

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

‘80 John Deere 550 Item ID: 14037

L O G G I N G

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Item ID: 51746

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 801-362-2170

'13 John Deere 548G III Item ID: 8789

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

CAT 525D

Item ID: 9555H140 ‘16 Halverson Contact: JOE Skidsteer (DEMO) Email: Joe@lumbermensco.com Phone:ID: 888-401-6367 EXT 709 Item JW-909632 OR 801-362-2170 Contact: J Williams Ph: (888) 401-6367 x701

‘97 Timbco 425D Item ID: 13950

Contact: AUSTIN Email: Austin@lumbermensco.com ‘13 KMC 2500 EXT Track Phone: 888-401-6367 703 931-797-8029

Skidder

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

'07 John Deere 848H Grapple Skidder Item ID: 6566

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888)Deere 401-6367 x703 John Logger Item ID: 82959

with 1700MARK hours, in very good Contact:

Email: Mark@lumbermensco.com condition. Easily produces high Phone: 888-401-6367 EXT 708 702-875-2703

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

‘14IDB66TD Rotochopper Item 13644. Sam x702 Item ID: 13838 FIREWOOD PROCESSORS

Contact: SAM Wood Processor 2010 Shop Built Email: Sam@lumbermensco.com - It has a 353 Detroit diesel, 40 Phone: 888-401-6367 EXT 702 inch insert tooth circle saw, 30 foot  Issue 364 386

‘80 John Deere 550 Item ID: 14037

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 CTL 70 ‘05 Gehl 931-797-8029

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703 Prentice 384 Knuckleboom Loader Item ID: 82959 Best Value Portable Log Splitter

well built processor. Item ID 13820.

648 E Cable Skidder

Sam x702 Item ID: 87791 Firewood Processor - This is Contact: TED

Teds@lumbermensco.com aEmail: Chomper Model 16 PDA

Phone: 888-401-6367 EXT 701 orfirewood (801) 319-9351 automatice processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865. Timbco 425D Sam x702 Item ID: 98053

Handles logs up to 32”. Uses

LOGGING EQUIPMENT Contact: AUSTIN Email: Austin@lumbermensco.com BANDIT EXT 703 Phone: 888-401-6367 931-797-8029 1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

-Contact: Small manufacturer in PA has TED

Email: Teds@lumbermensco.com made the best valued EXT log 701 splitter. Phone: 888-401-6367 or (801) 319-9351

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

Johnprocessor Deerewith 85Da 10’ homemade

Item ID: 48169 log deck. Has a hydraulic grapple, Contact: AUSTIN chain kicker that all runs off Email:and Austin@lumbermensco.com Phone: 888-401-6367 703 of a 4 cylinder MercedesEXT power 931-797-8029 unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 -

John Deere 3412 Caterpillar Diesel700H engine

Item ID: 1324 with 850 HP. 5300 hrs. Mill in Contact: AUSTIN good condition. Just finished 10 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Acre clearing job, ready to work! 931-797-8029 Remote control. Big production

 List  seLL  exchange  buy  save

'94 CAT 518C Cable Skidder ‘93 Barko 180B Item ID: 7698 Item ID: 14077

Contact:SAM Austin Contact: Email: Sam@lumbermensco.com Ph: (888) 401-6367 x703 Phone: 888-401-6367 EXT 702

‘95 Deere C6 ‘05John Timberjack 608B Item ID: 13898 Tree Farmer

Contact: Item ID:SAM 13920 Email: Sam@lumbermensco.com Contact: Austin Phone: 888-401-6367 702 Ph: (888) 401-6367 EXT x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp

motor, Rotobec continuous Timberjack 1270C Itemoriginal ID: 8676 grapple, 5,000 hours.

(excellent condition.). Item ID Contact: JOE Email: Joe@lumbermensco.com 13238. x700 Phone:Chris 888-401-6367 EXT 709

OR 801-362-2170 1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with

approximately 1500III hours. Hour JD 648G (’03) Item ID: 36067 meter dont work. The last 2 owners have onlyJOE used it to load trucks or Contact: Email: Joe@lumbermensco.com

as a backup as needed. Has a CTR Phone: 888-401-6367 EXT 709

OR 801-362-2170 delimber, grapple has been rebuilt.

Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702Franklin 2005 Q70 Item ID: 5579

BELL

Contact: SAM T - This Bell has 1990 Bell Super Email: Sam@lumbermensco.com aPhone: brand new Duetz engine. 888-401-6367 EXTLever 702 control, 33” bar, pump and tranny ❘

 LumbermensCO.com


TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

‘97 Timberjack 240D Item ID: 13917

Contact: SAM The Tree Email: Sam@lumbermensco.com that Started Phone: 888-401-6367 EXT 702

it All!

Boonville, New York www.starwebhosting.net/woodsmen/

Item ID: 14218

Woods Publishing Item ID: 99807

ADVERTISING SALES

Contact: SAM Morris Woods Email:(888) Sam@lumbermensco.com 401-6367 ext. 704 Phone: 888-401-6367 EXT 702 morris@lumbermens.co

SOUTHWEST FOREST PRODUCTS EXPO

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Timber Harvester Item ID: 29211

MID-ATLANTIC

Selma, North Carolina 2004 Timbco 445EXL www.midatlantic-logging-biomass­ Item ID: 14170 expo.com/

LOGGING & MARK BIOMASS EXPO Contact: Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS

Contact: WALKER Austin Woods Email:(888) Walker@lumbermensco.com 401-6367 ext. 703 Phone: 888-401-6367 EXT 707 austin@lumbermens.co

MAILING ADDRESS

Contact: AUSTIN Email: Austin@lumbermensco.com KENTUCKY WOOD EXPO Phone: 888-401-6367 EXT 703 Sept931-797-8029 Fri, 15 - Sat, 16 Sept

D5H TSK

Item ID: 7098

Cambridge, Ohio www.ohioforest.org

Timbco 820D Item ID: 18370

** INFO LINK**

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

‘04 Fabtek 344B

BANDMILLS & HEADSAWS Item ID: JW-093430

Danckaert Band Resaw - Roughly Contact: SAM 10 hoursSam@lumbermensco.com on this machine since it Email: has been rebuilt, it has a EXT 24foot in Phone: 888-401-6367 702 feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough

'97 CAT 525 Original Skidder pressure guides. Top Cable Casting wheel Item ID: 9901 is supported on both sides. This isContact: an extremely SAMaccurate machine Email: Sam@lumbermensco.com in ve1y good condition, Cuts 130 Phone: 888-401-6367 EXT 702 feet a minute also has CLT presses. Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours07’ ready to run. Item ID 13434. Tigercat 620C

Sam x702 Item ID: 14248

CARRIAGES Contact: AUSTIN& DRIVES Email: Austin@lumbermensco.com 2010 Cardinal HD Carriage Phone: 888-401-6367 EXT 703 931-797-8029 Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

May be sent to­ morris@lumbermens.co

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

POSTMASTER

Brute Force Mfg. ..................... 31

carriage knees, husk including

10’ Equipment John Deere 648H Buck (AIM) ........ 36 Item ID: 14210 Corley Mfg .............................. 32 Contact: AUSTIN Email: Austin@lumbermensco.com CRD Metalworks .................... 25 Phone: 888-401-6367 EXT 703 931-797-8029 CW Mill-ArmorHog .............. 17

Midwest Sharpening.............. 26

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

16’ CAT 545D

Send address changes to: Item ID: 14211 Lumberman's Exchange P.O. Box 1916 Contact: AUSTIN Email: Austin@lumbermensco.com Columbia, TN 38402

Phone: 888-401-6367 EXT 703 The Lumberman's 931-797-8029 Exchange is

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content by advertisers 93’submitted Prentice 210 and writers, theID: Lumberman's Item 14216 Exchange, its principles and Contact: associates,AUSTIN are not held liable for Email: Austin@lumbermensco.com errors or omissions. Reproduction, Phone: EXT 703 in whole888-401-6367 or part, is prohibited with­ 931-797-8029 out written consent. ©2017 Woods Publishing

748G3 John Deere

Morbark .....................................9 Item ID: 2757 Multitek ................................... 12 Contact: FERY

Email: Fery@lumbermensco.com Piper's Saw Shop.................... 13 Phone: (888) 401-6367 ext.705

or (801)............................ 699-8784 Rotochopper 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler .............................14 12’ John Deere 437D Item ID: 14209 Iron Bull ................................... 21 Contact: AUSTIN Kilgore Saw ............................. 22 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 ................................. 24 Lignomat 931-797-8029

Thomas Industrial Controls..... 10 JD 643G Item ID: 80565 Union Grove Saw & Knife.. 2, 37

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Contact: JOE

Universal Refiner ................... 23 Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709

WoodMizer l OR................................ 801-362-2170

 SELL YOUR EQUIPMENT TODAY TODAY l§

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" 12’ bottom sawDeere and 36" top saw John 843K Item ID: 14212

STACKING RAC

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

‘99 Hydro-Ax 511 EX Item ID: 13799

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 29

L O G G I N G

MARKETING DIRECTOR

Sam Wall 2016 Tigercat 604 E Cable (888) 401-6367 ext. Skidder 702 Item ID:55393 sam@lumbermens.co

Item ID: 14217

Contact:-AUSTIN Fri, 25 August Sat, 26 August Contact: AUSTIN Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com Hot Springs, Arkansas EXT 703 Phone: 888-401-6367 Phone: 888-401-6367 EXT 703 www.arkloggers.com 931-797-8029 931-797-8029

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER '94 CAT 518 Grapple Winch

2011 John Deere 648H

07’ Tigercat 724E

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com


TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

Timberjack 380C Item ID: 410

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

90's Model Timberjack 240A Item ID: 14111

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

‘05 CAT TK560

PRENTICE 410EX Item ID: 3280

Item ID: 14004

L O G G I N G

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

‘11 Tigercat 845C

‘16 Halverson H140 Item ID: 13927 Skidsteer Contact: SAM (DEMO) Email: ID: Sam@lumbermensco.com Item JW-909632 Phone: 888-401-6367 Contact: J Williams EXT 702 Ph: (888) 401-6367 x701

01’ Ponsee Bison Forwarder Item ID: 14109

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 2500 Track ‘13 KMC OR 931-797-8029

Skidder

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

Tigercat 604

‘93 John Deere 548E

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 ‘05 Gehl 931-797-8029 CTL 70

Item ID: 7436

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph:John (888) 401-6367 x703 Deere 437E Item ID: 9508

with 1700JOE hours, in very good Contact:

Email: Joe@lumbermensco.com condition. Easily produces high Phone: 888-401-6367 EXT 709 801-362-2170 quality chips with patented ‘Cone’

drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Ponsse Ergo Item ID 13644. Sam x702 Item ID: 7720 FIREWOOD PROCESSORS

Contact: MARK 2010 Shop Built Wood Processor Email: Mark@lumbermensco.com -Phone: It has a 353 Detroit diesel, 888-401-6367 EXT40708 702-875-2703 inch insert tooth circle saw, 30 foot  Issue 364 386

Item ID: 14083

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703 CAT 559C Item ID:Log 269Splitter Best Value Portable

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

‘89 CAT D4Hwith LGPa 10’ homemade processor

Item ID: 13999 log deck. Has a hydraulic grapple, Contact: AUSTIN chain kicker that all runs off Email:and Austin@lumbermensco.com Phone: 888-401-6367 703 of a 4 cylinder MercedesEXT power 931-797-8029 unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

‘94John Caterpillar ‘95 Deere320 C6 Item ID: 13936 Tree Farmer Contact: AUSTIN

Email: ItemAustin@lumbermensco.com ID: 13920 Phone: 888-401-6367 EXT 703 Contact: ORAustin 931-797-8029

Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp

on injection pump. always started

with John Deere power unit with

tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

‘14 CAT 535C

Sam x702 Item ID: 13840

50% or better. 475 hp Cummins

adjustable to single two way. Great

702-875-2703

low hours. Control panel includes

Sam x702 Item ID: 13929

but electronic option is available. Has Log Lift. Uses 4-way wedge

Firewood Processor - This is Contact: SAM aEmail: Chomper Model 16 PDA Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 automatice firewood processor

‘11 Tigercat 620D

LOGGING Contact: SAM EQUIPMENT Email: Sam@lumbermensco.com BANDIT Phone: 888-401-6367 702 1999 Bandit 1900 TrackedEXT Disc

13HP Honda motor. Manual start

Item ID: 68516

Item ID: 14077 Contact: MARK Contact: Austin Email: Mark@lumbermensco.com Ph: (888) 401-6367 x703 Phone: 888-401-6367 EXT 708

2012 Cat D6K XL motor, Rotobec continuous Item ID: 14169 grapple, 5,000 original hours. Contact:condition.). AUSTIN Item ID (excellent Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 13238. Chris x700 OR 931-797-8029 1995 Barko 775 B Feller Buncher

well built processor. Item ID 13820.

Email: Joe@lumbermensco.com made the best valued EXT log 709 splitter. Phone: 888-401-6367 801-362-2170 Handles logs up to 32”. Uses

-Contact: Small manufacturer in PA has JOE

Tigercat 234 Knuckle Boom Loader ‘93 Barko 180B

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 -

‘85 John Deere 440D 3412 Caterpillar Diesel engine

Item ID: 12453 with 850 HP. 5300 hrs. Mill in Contact: AUSTIN good condition. Just finished 10 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Acre clearing job, ready to work! OR 931-797-8029 Remote control. Big production

 List  seLL  exchange  buy  save

- Pumps recently redone. 400 hrs

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour JD 648G Grapple Skidder

Item ID:The 54867 meter dont work. last 2 owners have onlyTED used it to load trucks or Contact:

Email: Teds@lumbermensco.com as a backup as needed.EXT Has a CTR Phone: 888-401-6367 701

or (801) 319-9351 delimber, grapple has been rebuilt.

Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702 ‘05

Tigercat 230B

Item ID: 13911

BELL

Contact: AUSTIN 1990 Bell Super T - This Bell has Email: Austin@lumbermensco.com 888-401-6367 EXTLever 703 aPhone: brand new Duetz engine. OR 931-797-8029 control, 33” bar, pump and tranny ❘

 LumbermensCO.com


TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

‘04 JCB 441 Wheel Loader Item ID: 13888

Contact: AUSTIN The Tree Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 that Started OR 931-797-8029

it All!

Boonville, New York www.starwebhosting.net/woodsmen/

'01 John Deere 648G3 Item ID: 90899

Woods Publishing Item ID: 14089

ADVERTISING SALES Contact: AUSTIN Morris Woods Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (888) 401-6367 ext. 704 OR 931-797-8029 morris@lumbermens.co

Item ID: 14070 EXPO SOUTHWEST FOREST PRODUCTS Fri, 25 August Sat, 26 August Contact:-AUSTIN

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

John Deere 437C Item ID: 1020

MID-ATLANTIC

‘09 John 650J XLT Selma, NorthDeere Carolina Item ID: 14091 www.midatlantic-logging-biomass­ expo.com/ Contact: AUSTIN

LOGGING &AUSTIN BIOMASS EXPO Contact: Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 703 KENTUCKY WOOD EXPO OR 931-797-8029 OR 931-797-8029

Fri, 15 Sept - Sat, 16 Sept Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS

(888) 401-6367 ext. 702 Item ID: 47648 sam@lumbermens.co

Contact: MARK Austin Woods Email: Mark@lumbermensco.com (888) 401-6367EXT ext. Phone: 888-401-6367 708703 or 702-875-2703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

'92 Send CAT 518C Cable Skidder address changes to: Item ID: 14107

Lumberman's Exchange

P.O. Box 1916 Contact: AUSTIN Email: Austin@lumbermensco.com Columbia, TN 38402 Phone: 888-401-6367 EXT 703 The Lumberman's OR 931-797-8029 Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers ‘02 Jackson Shavings Mill and writers, theID: Lumberman's Item 13736 Exchange, its principles and Contact: associates,AUSTIN are not held liable for Email: Austin@lumbermensco.com errors or omissions. Reproduction, Phone: EXT 703 in whole888-401-6367 or part, is prohibited with­ out written ORconsent. 931-797-8029 ©2017 Woods Publishing

‘03 John Deere 748GIII Item ID: 13851

Cambridge, Ohio 210D Knuckleboom Loader on Truck www.ohioforest.org Item ID: 6694

** INFO LINK**

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703

‘80 John Deere 540B

BANDMILLS & 11345 HEADSAWS Item ID:

Danckaert Band Resaw - Roughly Contact: AUSTIN Email: 10 hoursAustin@lumbermensco.com on this machine since it Phone: 888-401-6367 EXT 703 has it has a 24foot in been rebuilt, OR 931-797-8029 feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel

532 CAT Feller Buncher

is supported onID: both sides. This Item 14079

is an extremely accurate machine Contact: AUSTIN Email: in ve1y Austin@lumbermensco.com good condition, Cuts 130 Phone: 888-401-6367 EXT 703 feet a minute has CLT presses. OR also 931-797-8029 Item ID 13876. Austin x703

S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

06’ Franklin Q80

Sam x702 Item ID: 14214

CARRIAGES Contact: AUSTIN& DRIVES Email: Austin@lumbermensco.com 2010 Cardinal HD Carriage Phone: 888-401-6367 EXT 703 Carriages (Sawmill) - Cardinal OR 931-797-8029 Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

John Deere 548G3

Buck Equipment (AIM) ........ 36 Item ID: 985 Corley Mfg .............................. 32 Contact: AUSTIN Email: Austin@lumbermensco.com CRD Metalworks .................... 25 Phone: 888-401-6367 EXT 703 CW Mill-ArmorHog OR 931-797-8029 .............. 17

‘98 611 Ex-Hydro Ax

Morbark .....................................9 Item ID: 13948 Multitek ................................... 12 Contact: AUSTIN Email: Austin@lumbermensco.com Piper's Shop.................... 13 Phone:Saw 888-401-6367 EXT 703 OR............................ 931-797-8029 40 Rotochopper

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

CAT 235 BZ Hurst Boiler .............................14

Item ID: 1865 Iron Bull ................................... 21 Contact: TED Email: Teds@lumbermensco.com Kilgore Saw ............................. 22 Phone: 888-401-6367 EXT 701 Lignomat or ................................. (801) 319-9351 24

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Thomas Industrial Controls..... 10

‘06 CAT 517

Item ID:&13869 Union Grove Saw Knife.. 2, 37 Contact:Refiner SAM ................... 23 Universal Email: Sam@lumbermensco.com WoodMizer ................................ Phone: 888-401-6367 EXT 702l

 SELL YOUR EQUIPMENT TODAY TODAY l§

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom Trailers saw andCustom 36" topLog saw Transport Pup Item ID: JW-538174

STACKING RAC

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 7021

Prentice 384 w/ Bucksaw & Delimber Item ID: 14213

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net OR 931-797-8029 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 31

L O G G I N G

MARKETING DIRECTOR

Sam Cable Wall Dozer CAT D4H TSK

Email: Austin@lumbermensco.com Hot Springs, Arkansas EXT 703 Phone: 888-401-6367 www.arkloggers.com OR 931-797-8029

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER ‘08 John Deere 335C

‘95 Bell Ultra T

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com


TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

TIMBERJACK 230A Item ID: 9450

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

2004 CAT 517 Grapple Dozer Item ID: 70690

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703

Kubota SVL-95 2s

L O G G I N G

Item ID: 1025

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) x703 JOHN401-6367 DEERE 700J Item ID: 2212

with 1700 JOE hours, in very good Contact:

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 2500 Track ‘13 KMC OR 931-797-8029

Timbco 425 Item ID: 5627

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

‘05 Gehl CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703Tack Skidder '13 KMC 2500 Item ID: 14078 Best Value Portable Log Splitter

vans and produce 6 - 8 loads per

but electronic option is available.

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Barko 180B Item ID‘93 13644. Sam x702 Item ID: 14077 FIREWOOD PROCESSORS

Contact: AUSTIN 2010 Shop Built Wood Processor Email: Austin@lumbermensco.com 888-401-6367 EXT40703 -Phone: It has a 353 Detroit diesel, OR 931-797-8029 inch insert tooth circle saw, 30 foot  Issue 364 386

Item ID: 14186

Skidder

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

-Contact: Small manufacturer AUSTIN in PA has Email: Austin@lumbermensco.com made the888-401-6367 best valued logEXT splitter. Phone: 703 OR up 931-797-8029 Handles logs to 32”. Uses

day. Item ID 13882. Austin x703

Contact: J Williams Ph: (888) 401-6367 x701

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Email: Joe@lumbermensco.com condition. Easily produces high Phone: 888-401-6367 EXT 709 801-362-2170 quality chips with patented ‘Cone’

drum design. Can easily load 42’

Phone: 888-401-6367 Item ID: JW-909632 EXT 703 OR 931-797-8029

'94 Barko 160 Knuckleboom

Item ID: 7060

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

Bell Ultra C

‘16 Halverson H140 Contact: AUSTIN Skidsteer (DEMO) Email: Austin@lumbermensco.com Item ID: 14106

PRENTICE 2210

Item ID: 4861

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

'09 John Deere 753J Buncher

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

‘00 Timbco homemade processor 445D with a 10’

Item ID: 14096 log deck. Has a hydraulic grapple, Contact: AUSTIN chain and kicker that all runs off Email: Austin@lumbermensco.com Phone: 888-401-6367 703 of a 4 cylinder MercedesEXT power OR 931-797-8029 unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

off onto a conveyor. This is a very

2015 Cat Item 525D well built processor. ID 13820. Item ID: 14167 Sam x702 Contact:Processor AUSTIN - This is Firewood Email: Austin@lumbermensco.com 888-401-6367 EXT 703 aPhone: Chomper Model 16 PDA OR 931-797-8029 automatice firewood processor with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased

new for $32,500. Item Track ID 13865. ‘99 Case 850G Long Dozer Item ID: 13909 Sam x702 Contact: AUSTIN LOGGING EQUIPMENT Email: Austin@lumbermensco.com BANDIT EXT 703 Phone: 888-401-6367 OR1900 931-797-8029 1999 Bandit Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 -

Timberjack 230A 3412‘89 Caterpillar Diesel engine

Item ID: 13885 with 850 HP. 5300 hrs. Mill in Contact: AUSTIN good condition. Just finished 10 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Acre clearing job, ready to work! OR 931-797-8029 Remote control. Big production

 List  seLL  exchange  buy  save

Quadco 2900 Intermittent ‘93 Barko 180B Head Item ID: 32295

Item ID: 14077 Contact: MARK Contact: Austin Email: Mark@lumbermensco.com Ph: (888) 401-6367 x703 Phone: 888-401-6367 EXT 708

702-875-2703

2010 Tigercat 724E ‘95 John Deere C6 Item ID: 14247 Tree Farmer Contact: AUSTIN

Email: ItemAustin@lumbermensco.com ID: 13920 Phone: 888-401-6367 EXT 703 Contact: ORAustin 931-797-8029

Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp

TIMBERJACK 460D / 648G III motor, Rotobec continuous Item ID: 34900 grapple, 5,000 original hours. Contact: JOE (excellent condition.). Item ID Email: Joe@lumbermensco.com

Phone:Chris 888-401-6367 EXT 709 13238. x700

OR 801-362-2170

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with

approximately 1500Grapple hours. Skidder Hour John Deere 548G3 Item ID: 43042 meter dont work. The last 2 owners Contact: have onlyMARK used it to load trucks or Email: Mark@lumbermensco.com

as a backup as needed.EXT Has a CTR Phone: 888-401-6367 708

702-875-2703

delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

CAT 928G BELL

Item ID: 6056

Contact: AUSTIN 1990 Bell Super T - This Bell has Email: Austin@lumbermensco.com 888-401-6367 EXTLever 703 aPhone: brand new Duetz engine. OR 931-797-8029 control, 33” bar, pump and tranny ❘

 LumbermensCO.com


TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

John Deere 548G3 Grapple Skidder Item ID: 61325

Contact: MARK The Tree Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 that Started 702-875-2703

it All!

Boonville, New York www.starwebhosting.net/woodsmen/ 2054 John Deere Item ID: 73244

Contact: FERY Email: Fery@lumbermensco.com Phone: (888) 401-6367 ext.705 or (801) 699-8784

Contact: FERY Hot Springs, Arkansas Email: Fery@lumbermensco.com Phone: (888) 401-6367 ext.705 www.arkloggers.com or (801) 699-8784

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Selma, North Carolina John Deere Tractor John Deere 540G3 www.midatlantic-logging-biomass­

Contact: FERY Email: Fery@lumbermensco.com Phone: (888) 401-6367 ext.705 or (801) 699-8784

MARKETING DIRECTOR

Donna Heninger

EQUIPMENT REPS

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

03’ Woodmizer LT-300 Operation Send address changes to: Item ID: 14171

Lumberman's Exchange P.O. Box 1916 Contact: AUSTIN Email: Austin@lumbermensco.com Columbia, TN 38402

Phone: 888-401-6367 EXT 703 The Lumberman's OR 931-797-8029 Exchange is

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers Cutoff Trim Saw and writers, the ID: Lumberman's Item 5461 Exchange, its principles and associates, TED are not held liable for Contact: errors or omissions. Reproduction, Email: Teds@lumbermensco.com Phone: EXT 701 in whole888-401-6367 or part, is prohibited with­ out written orconsent. (801) 319-9351 ©2017 Woods Publishing

Fri, 15 Sept - Sat, 16 Sept

Go Fast Run Around System Item ID: 84282

Cambridge, Ohio www.ohioforest.org

Hurdle Sawmill Setup Item ID: 32313

** INFO LINK**

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703

Danckaert Band Resaw - Roughly Contact: TED

Email: Teds@lumbermensco.com 10 hours on this machine since it Phone: 888-401-6367 EXT 701

been rebuilt, or (801)it319-9351 has has a 24foot in

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel

Cat 320C Logsides. Loader is supported on both This Item ID: 54026 is an extremely accurate machine Contact: MARK

in ve1yMark@lumbermensco.com good condition, Cuts 130 Email: Phone: 888-401-6367 EXT 708

feet also has CLT presses. a minute 702-875-2703 Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400

Prentice 384Item Knuckle hours ready to run. ID 13434.

Boom & Delimber Sam x702 Item ID: 49732

CARRIAGES & DRIVES

Contact: MARK

Email: Mark@lumbermensco.com 2010 Cardinal HD Carriage Phone: 888-401-6367 EXT 708

702-875-2703 Carriages (Sawmill) - Cardinal

Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Cornell Double End Trim........ Saw Buck Equipment (AIM) 36

Item ID: 6307 Corley Mfg .............................. 32 Contact: AUSTIN Email: Austin@lumbermensco.com CRD Metalworks .................... 25 Phone: 888-401-6367 EXT 703 CW Mill-ArmorHog OR 931-797-8029 .............. 17

Real Tuff Bagger Morbark .....................................9 Item ID: 50281 Multitek ................................... 12 Contact: AUSTIN Email: Austin@lumbermensco.com Piper's Saw Shop.................... 13 Phone: 888-401-6367 EXT 703 OR............................ 931-797-8029 40 Rotochopper

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

1996 Shavings Mill HurstJackson Boiler .............................14

Item ID: 1271 Iron Bull ................................... 21 Contact: AUSTIN Email: Austin@lumbermensco.com Kilgore Saw ............................. 22 Phone: 888-401-6367 EXT 703 Lignomat OR................................. 931-797-8029 24

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

S&W 125 High Production Thomas Industrial Controls.....Mill 10 Item ID: 8019 Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN Email: Austin@lumbermensco.com Universal Refiner ................... 23 Phone: 888-401-6367 EXT 703 OR 931-797-8029 WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY TODAY l§

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

Mobile 48" bottom sawDimensions and 36" top saw Model 12 Circle Saw Item ID: 62784

STACKING RAC

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703

Woodmizer LT 3000 Operation Item ID: 10761

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net OR 931-797-8029 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 33

S A W M I L L

POSTMASTER

Contact: FERY Email: Fery@lumbermensco.com Phone: (888) 401-6367EXPO ext.705 KENTUCKY WOOD or (801) 699-8784

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR

Contact: Austin TED Woods Email:(888) Teds@lumbermensco.com 401-6367 ext. 703 Phone: 888-401-6367 EXT 701 austin@lumbermens.co or (801) 319-9351

expo.com/

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Sam Wall Desjardin Shingle Mill (888) 401-6367 ext. 702 Item ID: 63655 sam@lumbermens.co

Item ID: 74808

MID-ATLANTIC Item ID: 41685

LOGGING & BIOMASS EXPO

650 G&Dozer BANDMILLS HEADSAWS Item ID: 53699

L O G G I N G

Morris Woods Contact: MARK Email:(888) Mark@lumbermensco.com 401-6367 ext. 704 Phone: 888-401-6367 EXT 708 morris@lumbermens.co 702-875-2703

SOUTHWEST FOREST PRODUCTS Item ID: 52045 EXPO Fri, 25 August - Sat, 26 August

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER Publishing PrenticeWoods 210E Knuckle Boom Loader Item ID: 56625 ADVERTISING SALES

Peterson Chipper

Processor Log Loader

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com


TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

Woodmizer LT300 Item ID: 7566

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703

Danchaert Band Resaw Item ID: 13876

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

'02 WoodMizer LT-40

Item ID: 11345 ‘16 Halverson H140 Contact: AUSTIN Skidsteer (DEMO) Email: Austin@lumbermensco.com Phone: 888-401-6367 Item ID: JW-909632 EXT 703 Contact: ORJ Williams 931-797-8029

‘93 BarkoScragg 180BMill Sanborn

Item ID: 14050 Item ID: 14077 Contact:AUSTIN Austin Contact: Email: Austin@lumbermensco.com Ph: (888) 401-6367 Phone: 888-401-6367 x703 EXT 703

OR 931-797-8029

Ph: (888) 401-6367 x701

Precision Scragg

‘14 Hurdle 3-HD Block Sawmill

‘06 Woodmizer LT70 Electric

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 2500 Track ‘13 KMC OR 931-797-8029

S A W M I L L

Item ID: 3607

Item ID: 13997

Item ID: 14084

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Woodmizer LT70 Bandmill Ph: (888) 401-6367 x703

Skidder

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

Edmiston Complete Sawmill

Item ID: 14076

‘13 Woodmizer 4000 Sawmill Item ID: 14000

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

‘05 Gehl CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID

'16 LT40 13916. AustinSuper x703 Hydraulic

off onto a conveyor. This is a very

Corley Complete Sawmill well built processor. Item ID 13820. Item ID: 14035 Sam x702 Contact:Processor AUSTIN - This is Firewood Email: Austin@lumbermensco.com 888-401-6367 EXT 703 aPhone: Chomper Model 16 PDA OR 931-797-8029 automatice firewood processor with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased

‘05forWoodmizer new $32,500. Item ID LT300 13865.

Cornell EdgerC6 ‘95 John Deere Item ID: 33423 Tree Farmer Contact: TED

ItemTeds@lumbermensco.com ID: 13920 Email: Phone: 888-401-6367 EXT 701 Contact: Austin or (801) 319-9351 Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

Hud-Son 360 Portable Sawmill

grapple, 5,000 hours. Itemoriginal ID: 8841

(excellent condition.). Item ID Contact: TED

Email: Chris Teds@lumbermensco.com 13238. x700 Phone: 888-401-6367 EXT 701

(801) 319-9351 1995 Barkoor775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with

quality chips with patented ‘Cone’

-Contact: Small manufacturer in PA has SAM Email: Sam@lumbermensco.com made the best valued log splitter. Phone: 888-401-6367 EXT 702 Handles logs up to 32”. Uses

Sam x702 Contact: AUSTIN LOGGING EQUIPMENT Email: Austin@lumbermensco.com Phone: 888-401-6367 BANDIT EXT 703 OR 931-797-8029 1999 Bandit 1900 Tracked Disc

Meadows #3 Complete Operation approximately 1500 hours. Hour Item ID: 964 meter dont work. The last 2 owners Contact: AUSTIN have only used it to load trucks or Email: Austin@lumbermensco.com Phone: 888-401-6367 EXTa703 as a backup as needed. Has CTR OR 931-797-8029 delimber, grapple has been rebuilt.

vans and produce 6 - 8 loads per

but electronic option is available.

50% or better. 475 hp Cummins

Item ID 13694. Sam x702

Item ID: 98854

Contact: with 1700 MARK hours, in very good Email: Mark@lumbermensco.com

Phone: 888-401-6367 EXT 708 condition. Easily produces high

702-875-2703

drum design. Can easily load 42’ day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Meadows #2 Deluxe

Item ID 13644. x702 ItemSam ID: 14250

FIREWOOD PROCESSORS

Contact: AUSTIN Email: Austin@lumbermensco.com 2010 Shop Built Wood Processor Phone: 888-401-6367 EXT 703 - It has a 353 diesel, 40 ORDetroit 931-797-8029 inch insert tooth circle saw, 30 foot  Issue 364 386

Item ID: 9903 Best Value Portable Log Splitter

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

Holtec Transcut homemade processor with a II 10’

Item ID: 70976 log deck. Has a hydraulic grapple, Contact: AUSTIN chain kicker that all runs off Email:and Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 of a 4 cylinder Mercedes power OR 931-797-8029 unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

Item ID: 14031

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 -

'02 Woodmizer LT-40 Super HD 3412 Caterpillar Diesel engine

Item ID: 14118 with 850 HP. 5300 hrs. Mill in Contact: AUSTIN good condition. Just finished 10 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Acre clearing job, ready to work! OR 931-797-8029 Remote control. Big production

 List  seLL  exchange  buy  save

Boom cylinders have minor leaks. 94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702Hurdle Circle Saw Item ID: 42289

BELL

Contact: MARK 1990 Bell Super T - This Bell has Email: Mark@lumbermensco.com 888-401-6367 EXTLever 708 aPhone: brand new Duetz engine. 702-875-2703 control, 33” bar, pump and tranny ❘

 LumbermensCO.com


TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York

Item ID: 75143

Contact: MARK The Tree Email: Mark@lumbermensco.com that Started Phone: 888-401-6367 EXT 708 702-875-2703

it All!

Email: Austin@lumbermensco.com Springs, Arkansas EXT 703 Email: Austin@lumbermensco.com Hot Phone: 888-401-6367 Phone: 888-401-6367 EXT 703 www.arkloggers.com OR 931-797-8029 OR 931-797-8029

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER 359 Peterbilt Truck

Morbark M12D Chipper

ADVERTISING SALES Contact: AUSTIN Email: Austin@lumbermensco.com Morris Woods Phone: 888-401-6367 EXT 703 (888) 401-6367 ext. 704 OR 931-797-8029 morris@lumbermens.co

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

Woods Publishing Item ID: 7841

Item ID: 48408

MID-ATLANTIC

LOGGING & BIOMASS EXPO

#2 Sawmill Selma,Hurdle North Carolina Item ID: 8720 www.midatlantic-logging-biomass­ expo.com/ Contact: AUSTIN

MARKETING DIRECTOR

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 KENTUCKY WOOD EXPO OR 931-797-8029

Fri, 15 Sept - Sat, 16 Sept Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS

Sam Wall Chipper 2016 Barko Tree (888) 401-6367 ext. 702 Item ID: 16688 sam@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER Blockbuster 1412 Plus

Send address to: Item ID:changes 958 Lumberman's Exchange Contact: AUSTIN P.O. Box 1916 Email: Austin@lumbermensco.com TN 38402 Phone:Columbia, 888-401-6367 EXT 703

OR 931-797-8029

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers Freightliner 1990 and writers, the Lumberman's Item ID: 1990 Exchange, its principles and associates, are not held liable for Contact: TED errors or omissions. Reproduction, Email: Teds@lumbermensco.com in whole888-401-6367 or part, is prohibited with­ Phone: EXT 701 out written orconsent. (801) 319-9351 ©2017 Woods Publishing

Item ID: 59687

Cambridge, Ohio Peerless 45’ Walking Floor Trailer www.ohioforest.org Item ID: 83112

** INFO LINK**

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

Item ID: 200 BANDMILLS & HEADSAWS

Danckaert Resaw - Roughly Contact: Band AUSTIN Email: Austin@lumbermensco.com 10 hours on this machine since it Phone: 888-401-6367 EXT 703 OR 931-797-8029 has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel Quality 4 Head Trim Saw Item is supported on ID: both1559 sides. This

isContact: an extremely TED accurate machine Email: Teds@lumbermensco.com in ve1y good condition, Cuts 130 Phone: 888-401-6367 EXT 701 a minute or (801) 319-9351 feet also has CLT presses. Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400

Mack Truck with hours ready to run. Item Trailer ID 13434. Item ID: 23388 Sam x702 Contact: MARK & DRIVES CARRIAGES Email: Mark@lumbermensco.com 2010 Cardinal HD Carriage Phone: 888-401-6367 EXT 708 or 702-875-2703 Carriages (Sawmill) - Cardinal

Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck Equipment (AIM) ........ 36 Item ID: 86536

Morbark .....................................9 Item ID: 63148

Ford F650 48" bottom sawService and 36" topTruck saw Item ID: 92089

Corley Mfg .............................. 32 Contact: TED Email: Teds@lumbermensco.com CRD Metalworks .................... 25 Phone: 888-401-6367 EXT 701 CW Mill-ArmorHog or (801) 319-9351 .............. 17

Multitek ................................... 12 Contact: MARK Email: Mark@lumbermensco.com Piper's Shop.................... Phone:Saw 888-401-6367 EXT 708 13 or 702-875-2703 Rotochopper ............................ 40

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler .............................14 Item ID: 16264 Iron Bull ................................... 21 Contact: TED Kilgore Saw ............................. 22 Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 24 Lignomat or ................................. (801) 319-9351

Thomas Industrial Controls..... 10 Item ID: 33563 Union Grove Saw & Knife.. 2, 37 Contact: TED Email: Teds@lumbermensco.com Universal Refiner ................... 23 Phone: 888-401-6367 EXT 701 or (801) 319-9351 WoodMizer ................................ l

Paccair Winch

Morbark 30/60 Chipper

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Morbark PS8 Post Peeler

1999 International 9100

 SELL YOUR EQUIPMENT TODAY TODAY l§

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

STACKING RAC Kenworth T-800 Item ID: 87370

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 www.BakerProducts.net or 702-875-2703 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 35

M I S C E L L A N E O U S

Contact: Austin TED Woods Email: Teds@lumbermensco.com (888) 401-6367 ext. 703 Phone: 888-401-6367 EXT 701 or (801) 319-9351 austin@lumbermens.co

Peterbilt 378

Frick #1 Jumbo Mill

S A W M I L L

Morbark 6036 Chipper

Woodmizer Twin Blade www.starwebhosting.net/woodsmen/ Wood-Mizer LT40 Diesel Edger Item ID: 13995 Item ID: 14191 SOUTHWEST FOREST PRODUCTS EXPO Contact:-AUSTIN Fri, 25 August Sat, 26 August Contact: AUSTIN

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com


TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

Morbark Chipper

'93 KW 425 CAT

Item ID: 43812

Item ID:13342

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

Samsung SL150 Wheel Loader

ShopBarko Built Wood Processor ‘93 180B Item ID: 14038

Contact: MARK Skidsteer (DEMO) Email: Mark@lumbermensco.com Phone: 888-401-6367 Item ID: JW-909632 EXT 708 Contact: 702-875-2703 J Williams

Contact: Contact:AUSTIN Austin Email: Austin@lumbermensco.com Ph: (888) 401-6367 Phone: 888-401-6367 x703 EXT 703 OR 931-797-8029

Item ID: 98970

‘16 Halverson H140

Item ID: 14077

M I S C E L L A N E O U S

Ph: (888) 401-6367 x701

‘06 Cord King Model 60

1990 Freightliner

'08 Dynamic Chipper

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT Track 708 ‘13 KMC 2500 or 702-875-2703

Item ID: 7422

Item ID: 14068

Item ID: 6919

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Cord King M44 Ph: ‘15 (888) 401-6367 x703 Item ID: 13961

AM General M818 Army Truck Item ID: 14576

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 or 931-797-3915 ‘05 Gehl CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID

2007Austin Morbark Chipper 13916. x703

Contact: AUSTIN with 1700 hours, in very good Email: Austin@lumbermensco.com Phone: 888-401-6367 EXThigh 703 condition. Easily produces OR 931-797-8029 quality chips with patented ‘Cone’

Item ID: 9658 Best Value Portable Log Splitter WALKER in PA has -Contact: Small manufacturer Email: Walker@lumbermensco.com made the888-401-6367 best valued logEXT splitter. Phone: 707 logs or 931-797-3915 Handles up to 32”. Uses

vans and produce 6 - 8 loads per

but electronic option is available.

drum design. Can easily load 42’ day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

W6FIDAllied Systems Item 13644. Sam x702 Winch Item ID: 56032 FIREWOOD PROCESSORS Contact: 2010 ShopMARK Built Wood Processor Email: Mark@lumbermensco.com

EXT 708 -Phone: It has a888-401-6367 353 Detroit diesel, 40

702-875-2703

inch insert tooth circle saw, 30 foot  Issue 364 386

Skidder

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

International Durastar Bucket - Boom Truck

Item ID: 14196

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

Mack Truck w/Hood homemade processor withLoader a 10’ Item ID: 76831 log deck. Has a hydraulic grapple, Contact: MARKthat all runs off chain and kicker Email: Mark@lumbermensco.com Phone: 888-401-6367 708 of a 4 cylinder MercedesEXT power 702-875-2703 unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

off onto a conveyor. This is a very

'99 built Peterbilt Road well processor. ItemTractor ID 13820. Item ID: 14188 Sam x702 Contact:Processor AUSTIN - This is Firewood Email: Austin@lumbermensco.com 888-401-6367 EXT 703 aPhone: Chomper Model 16 PDA OR 931-797-8029 automatice firewood processor with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased

Morbark Chipper new for $32,500. Item ID 13865.

Morbark 58” LIKE NEW ‘95 John Deere C6 Item ID: 6114 Tree Farmer Contact: AUSTIN

Email: ItemAustin@lumbermensco.com ID: 13920 Phone: 888-401-6367 EXT 703 Contact: ORAustin 931-797-8029

Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp

Precision Chipper motor, Rotobec continuous Item ID: 4524 grapple, 5,000 original hours.

(excellent Item ID Contact:condition.). TED Email:Chris Teds@lumbermensco.com 13238. x700 Phone: 888-401-6367 EXT 701 (801) 319-9351 1995 Barkoor775 B Feller Buncher - Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with

Sam x702 Item ID: 80356

855 Cummings 350 KW approximately 1500 hours. Hour Item ID:The 28802 meter dont work. last 2 owners

Chipper - Cat Under Carriage at

Boom cylinders have minor leaks.

LOGGING Contact: TED EQUIPMENT Email: Teds@lumbermensco.com BANDIT EXT 701 Phone: 888-401-6367 or1900 (801)Tracked 319-9351 1999 Bandit Disc 50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 -

CAT 3412 - 600KW Prime 3412 Caterpillar Diesel engine Item ID: 85729 with 850 HP. 5300 hrs. Mill in

Contact: TED Just finished 10 good condition. Email: Teds@lumbermensco.com Acre clearing job, ready to work! Phone: 888-401-6367 EXT 701 or (801) 319-9351 Remote control. Big production

 List  seLL  exchange  buy  save

have only used Contact: TED it to load trucks or Email: Teds@lumbermensco.com as a backup as needed. Has CTR Phone: 888-401-6367 EXTa701 or (801) has 319-9351 delimber, grapple been rebuilt. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

CAT D349 Gen 2 Item ID: 227 BELL

Contact: TED T - This Bell has 1990 Bell Super Email: Teds@lumbermensco.com aPhone: brand new Duetz engine. 888-401-6367 EXTLever 701 or (801) 319-9351 control, 33” bar, pump and tranny ❘

 LumbermensCO.com


TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

F800 Boom Bucket Truck Item ID: 35784

Contact: FERY The Tree Email: Fery@lumbermensco.com Phone: (888) 401-6367 ext.705 that Started or (801) 699-8784

it All!

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER 25' LOG PUP 4 BUNKS TRAILER Woods Publishing Item ID: 8062

Viking Deloupe Trailer Item ID: 32415

SOUTHWEST FOREST PRODUCTS EXPO Contact:-AUSTIN Fri, 25 August Sat, 26 August

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS '10 Woodsman 440 Fri, 15 Sept - Sat, 16 Sept

94’ Mack Prentice 120 Selma, Northw/ Carolina Item ID: 14215 www.midatlantic-logging-biomass­ expo.com/ Contact: AUSTIN

Whole Tree Chipper Item ID: 14105

MID-ATLANTIC

Contact: AUSTIN Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 WOOD EXPO Phone: 888-401-6367 EXT 703 KENTUCKY 931-797-8029 OR 931-797-8029 LOGGING & BIOMASS EXPO

Fri, 15 Sept - Sat, 16 Sept Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS

(888) 401-6367 ext. 702 Item ID: 52815 sam@lumbermens.co

Contact: MARK Austin Woods Email: Mark@lumbermensco.com Phone: 888-401-6367 708 (888) 401-6367EXT ext. 703 or 702-875-2703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

Bandit POSTMASTER Grinder - Chipper

SendItem address changes to: ID: 72593 Lumberman's Exchange P.O. Box 1916 Contact: TED Email: Teds@lumbermensco.com Columbia, TN 38402

Phone: 888-401-6367 EXT 701 or (801) 319-9351 The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of contentBucket submitted/ by advertisers Ford Boom Truck and writers, theID: Lumberman's Item 80919 Exchange, its principles and associates, TED are not held liable for Contact: errors or omissions. Reproduction, Email: Teds@lumbermensco.com Phone: EXT 701 in whole888-401-6367 or part, is prohibited with­ out written orconsent. (801) 319-9351

Email: Austin@lumbermensco.com Hot Springs, Arkansas EXT 703 Phone: 888-401-6367 www.arkloggers.com 931-797-8029

Contact: FERY Email: Fery@lumbermensco.com Phone: (888) 401-6367 ext.705 or (801) 699-8784

MARKETING DIRECTOR

Wall Tumbler BlockbusterSam Firewood

Item ID: 8256

Inline 6 CAT 200 KW Item ID: 44131

Cambridge, Ohio www.ohioforest.org '09 Mack Truck & Trailer Item ID: 74618

** INFO LINK**

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

Int'l 4300 Bucket Truck Item ID: BANDMILLS & 29129 HEADSAWS

Contact: Band MARKResaw - Roughly Danckaert Email: Mark@lumbermensco.com 10 hours on this machineEXT since it Phone: 888-401-6367 708 702-875-2703 has been rebuilt, it has a 24foot in

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough

pressure guides. Top Truck Casting wheel Mack Log Item ID: 14087 is supported on both sides. This AUSTIN isContact: an extremely accurate machine Email: Austin@lumbermensco.com in ve1y good condition, Cuts 130 Phone: 888-401-6367 EXT 703 a minute 931-797-8029 feet also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400

Tajfun Firewood Processor hours ready to run. Item ID 13434. Item ID: 14249 Sam x702 Contact: AUSTIN& DRIVES CARRIAGES Email: Austin@lumbermensco.com 2010 Cardinal HD Carriage Phone: 888-401-6367 EXT 703 OR 931-797-8029 Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck Equipment Item ID: (AIM) 761 ........ 36

Morbark .....................................9 Item ID: 41386

Corley Mfg .............................. 32 Contact: AUSTIN Email: Austin@lumbermensco.com CRD Metalworks 25 Phone: 888-401-6367.................... EXT 703 OR 931-797-8029

CW Mill-ArmorHog .............. 17

Multitek ................................... 12 Contact: MARK Email: Mark@lumbermensco.com Piper's Shop.................... 13 Phone:Saw 888-401-6367 EXT 708 702-875-2703 Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

MACK CHN613

Kenworth Log Truck Hurst Boiler .............................14

Item ID: 4849 Iron Bull ................................... 21 Contact: AUSTIN Email: Austin@lumbermensco.com Kilgore Saw ............................. 22 Phone: 888-401-6367 EXT 703 Lignomat 931-797-8029 ................................. 24

75” Fulghum Chipper

3 Strand Log Deck

Thomas Industrial Controls..... 10 Item ID: 14095 Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN Email: Austin@lumbermensco.com Universal Refiner ................... 23 Phone: 888-401-6367 EXT 703 OR 931-797-8029 WoodMizer ................................ l

©2017 Woods Publishing

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

02’bottom Jackson Lumber 48" saw and 36"Harvester top saw Item ID: 1187

STACKING RAC

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Morbark 40/36 Item ID: 647

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 www.BakerProducts.net 801-362-2170 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 37

M I S C E L L A N E O U S

ADVERTISING SALES Contact: JOE Morris Woods Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 (888) 401-6367 ext. 704 801-362-2170 morris@lumbermens.co

Boonville, New York www.starwebhosting.net/woodsmen/ Sun 4 Bolster Log Trailer

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com


“Precision Under Pressure”

A D D I R EC TO RY

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

,-soo-211-94&8 ‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 386

low hours. Control panel includes tach, oil pressure, water temp and PLEASE PRINT

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

amp gauges. Cuts logs up to 16”.

on injection pump. always started

good. in good working order. 22in

OCTOBER 2019

kohing head. head works great.

If you need to Change your Address or Item ID 13185. Sam x702 Add Your Name to our mailing list, then Barkoand 160D -mail new engine manuals and receipts. Purchased please complete this1999 form to: with One owner and comes with all

new for $32,500. Item ID 13865.

approximately 1500 hours. Hour

- Small manufacturer in PA has

Lumbermens™ Magazine meter dont work. The last 2 owners Sam x702 P.O. Box 1916 have38402 only used it to load trucks or LOGGING EQUIPMENT Columbia, TN

Handles logs up to 32”. Uses

❑ Bandit Please ❑ Disc Please Change Please Remove delimber,❑ grapple has been rebuilt. 1999 1900Add Tracked

Best Value Portable Log Splitter made the best valued log splitter. 13HP Honda motor. Manual start

• Through-beam range u1p to 230 feet vans and produce 6 - 8 loads per but electronic option is available. • Waterproof - IP67 rated day. Item ID 13882. Austin x703 Has Log Lift. Uses 4-way wedge • Not affected by vibration EDGERS & GANGS adjustable to single two way. Great • 60k LUX Immunity to sunlight Brewco Saws - Two Brewco Saws Value! PA. Item ID 12062. Sam x702 in excellent condition. Runs great.

Accord Financial Group, Inc...........6................................937-753-1345 Air Systems Mfg,..............................13..............................828-757-3500 Albach Northamerica......................1................................978-939-9111 Anson..................................................4................................800-663-7723 B & B Mfg..........................................16..............................800-654-5320 B. H. Payne........................................18.......................... ‘93 Barko....404-761-8711 180B Baker...................................................5, 9...................... . .....800-548-6914 ‘16 Halverson H140 Item ID: 14077 Bell's Machining...............................15......................... .....888-995-1965 Contact: Austin Skidsteer (DEMO) Blockbuster Inc.................................11.Ph: .............................888-775-4883 (888) 401-6367 x703 Item ID: JW-909632 Buck Equipment (AIM)....................16..............................800-803-3365 Contact: J Williams Built-Rite Firewood Processing Ph: (888) 401-6367 x701 Equip...12..............................800-757-2520 Cord King...........................................2................................888-219-9663 Corley Mfg.........................................15..............................423-698-0284 CW Mill, DynaHog...........................3................................800-743-3491 F&R Mfg.............................................13..............................800-355-1250 GoFast Manufacturing....................9................................800-854-7439 Great Lakes Mfg...............................13..............................877-248-5677 Hurst Boiler.......................................14........................... ...877-774-8778 ‘95 John Deere C6 Iron Horse Auction Company........11..............................800-997-2248 Tree Farmer Kilgore Saw........................................17..............................888-857-5153 Item ID: 13920 Klug Korners.....................................15........................... ...800-471-5060 Contact: Austin ‘13 KMC 2500 Track Lignomat............................................11..............................800-227-2105 Ph: (888) 401-6367 x703 SkidderSaw...............................15........................... Menominee ...800-582-0470 Metal Detectors, Inc.. . .....................13. . ............................541-345-7454 Item ID: 14078 Midwest ......................10..............................231-924-5953 Contact:Sharpening Austin capacity!. Item ID 13421. Sam x702 Multitek America. LLC........14..............................800-243-5438 Ph: (888)North 401-6367 x703 BARKO Pantron Automation, Inc. ..............38........................... ...800-211-9468 1994 Barko 160B Electric Piper’s Saw Shop..............................11............................-..800-845-6075 knuckleboom, 30'...800-248-4479 boom, 75hp off onto a conveyor. This is a very Row Electric......................................10........................... motor, Rotobec continuous well built processor. Item ID 13820. Ryan's Equipment.............................9................................989-427-2829 Select Sawmill Co.............................16.grapple, .............................866-724-7600 5,000 original hours. Sam x702 Trelan..................................................40. . ............................877-487-3526 (excellent condition.). Item ID Firewood Processor - This is 13238. Chris x700 aUniversal ChomperRefiner..............................7................................800-277-8068 Model 16 PDA Universal Wearparts, Inc................17..............................800-647-8440 1995 Barko 775 B Feller Buncher automatice firewood processor Woodcracker Forest Machines.....39..............................617-401-5584 - Pumps recently redone. 400 hrs with John Deere power unit with Woodlandia.......................................17..............................877-508-8777

Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

BANDIT

as a backup as needed. Has a CTR

*Company name and address process have your change. Boomto cylinders minor leaks. Chipper - Cat Under Carriage at required Company Name*:_ Item ID 13694. Sam x702 50% or better. 475________________________________________________________ hp Cummins

94 Barko 275 - Excellent value Diesel. 7500 Hours. One owner. Individual Name:__________________________________________________________ with low at hours at 3,500. 5.9 Well maintained. Item ID 13294. Address:_________________________________________________________________ Sam x702

CUMMINS continuous grapple.

_______________________________________________________________________

2004 Bandit Beast Model 4680 -

Runs Great!. Item ID 13740. Sam

City:____________________________________________________________________

3412 Caterpillar Diesel engine

x702

State:___________________________________________________________________ BELL with 850 HP. 5300 hrs. Mill in Zip:__condition. ___________________________________________________________________ 1990 Bell Super T - This Bell has good Just finished 10

a brand new Duetz engine. Lever Acre clearing job, ready to work! Phone:__________________________________________________________________ control, 33” bar, pump and tranny Remote control. Big production Email:___________________________________________________________________

 List  seLL  exchange  buy  save

 LumbermensCO.com


** CALENDAR**

WOODCRACKER.COM NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/ ®

WOODCRACKER

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree tree shear Efficient

Hot Springs, Arkansas www.arkloggers.com

that Started it All!

Visit us at the PUBLISHER Paul Bunyan Show Woods Publishing Booth #432

Escanaba, Michigan

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

LOGGING & BIOMASS EXPO

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Donna Heninger

Sam Wall (888) 401-6367 ext. 702 WATCH THE VIDEO sam@lumbermens.co TO THIS STORY!

** INFO

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

MayINbe sent to­ MADE AUSTRIA

morris@lumbermens.co

POSTMASTER

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

bells and whistles, its a production that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine

S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

with 44 inch wheels, and all the

Item ID 13876. Austin x703

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR

feed deck 20 foot out feed deck

feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

10 hours on this machine since it

in ve1y good condition, Cuts 130

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Danckaert Band Resaw - Roughly

machine, with air strain conveyers

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept MID-ATLANTIC

ADVERTISING SALES

BANDMILLS & HEADSAWS has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702

“The efficiency is CARRIAGES & DRIVES 2010 Cardinal HD Carriage LINK** unparalleled!“ Carriages (Sawmill) - Cardinal

it includes carriage ElmarCarriage Varro,line Indiana

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck Equipment (AIM) ........ 36

Morbark .....................................9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

The Lumberman's Exchange is CW Mill-ArmorHog .............. 17 Rotochopper............................ 40 published monthly by Woods CW Mill-Hogzilla ................... 15 Row Electric ............................ 20 Publishing, P.O. Box 1916, Columbia, TN 38402. All rights Dyna Products ........................ 35 Sawmill Exchange .................. 11 reserved. All editorial/ advertorial submissions are used at the Empire Hydraulics ................... 8 Select Sawmill ......................... 19 discretion of the publisher and may WOODCRACKER WOODCRACKER WOODCRACKER WOODCRACKER be edited for purposes clarity device Great Lakes Sawmill Root stockofclearing Wood Mfg splitter. .................... 34 SmithClearing rake........................... 4 Wood splitting grapple and space. Although all efforts have Hahn Machinery ...................... 3 The Paul Bunyan Show ......... 39 been made to ensure accuracy of content submitted by advertisers Hurst Boiler .............................14 Thomas Industrial Controls..... 10 and writers, the Lumberman's Exchange, its principles and Iron Bull ................................... 21 Union Grove Saw & Knife.. 2, 37 associates, are not held liable for  learn more about the efficient Woodcracker® forest machines  +1-617-401-5584  www.woodcracker.com errors or omissions. Reproduction, Kilgore Saw ............................. 22 Universal Refiner ................... 23 in whole or part, is prohibited with­ New inventory arriving monthly. Call 24 for availability to find a dealer www.BakerProducts.net Lignomat ................................. WoodMizerand ................................ l near you. out written consent. 800.S48.6914 I S73.663.7711 ©2017 Woods Publishing ®

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

®

 SELL YOUR EQUIPMENT TODAY TODAY l§

®

 24/7 SUPPORT 0 SUPPORT

®

❘ L!  (888) 401-MENS 401-MENS

NO. 39


LUMBERMENS™ MAGAZINE Post Office Box 1916 Columbia, Tennessee 38402

PRSRT STD. U.S. Postage PAID Permit No. 212 Pulaski, TN

®

®

45 Over 45 Years!

498 Eight Mile Road | Remus, MI 49340 WWW.TRELAN.COM

Lumbermens October 2019 Magazine  

Lumbermens October 2019 Magazine  

Profile for lbxonline