The Passion for Passive

Imagine there’s no heat bill... it’s easy if you try.

D

uring a late December cold front, Dr. Stephen Holland and Vivian Baguer Holland were enjoying some time at their waterfront home on Lake Tashmoo. The thermostat read 12 degrees outside but it felt like 5. Inside was a comfortable 69 degrees, despite there being no roaring wood stove, clanking radiators, or baseboard heat. The Hollands don’t have a traditional heating system at all.

Their two-story, approximately 2,500-square-foot home is certified passive by the Passive House Academy (one of two relevant certifying agencies in the United States), meaning it requires almost no energy to heat or cool its four bedrooms and three-and-a-half baths.

When I visited the house a few weeks earlier, wind ripped over the white-capped pond as workers from Contemporary Landscapes fought a hard-won battle against fallen leaves. But for all the clamor and chaos outside, inside there was silence. It was both unsettling and exhilarating to stand in that snug living room and watch the world spin madly on but neither feel nor hear the effects of any of it. “Like being in a cocoon,” said Vivian.

A passive house is built so efficiently that it requires extremely little energy for heating or cooling. With an energy recovery ventilation system, insulation, and no air or thermal leaks – “thermal bridges” – a house can theoretically be heated entirely from the sun, body heat, and excess heat from appliances, including a television set. Cooling a passive home depends on strategic window placement and, in some settings, the use of a brise-soleil, an architectural structure that deflects sunlight. To be a certified passive house, the building must meet a rigorous standard of energy efficiency. Though the certification is intense, it can be broken down to three main tenets: proper insulation, air-tightness, and no thermal bridges.

The passive house metric was developed and refined in the late 1980s by Dr. Wolfgang Feist, a German physicist, and Dr. Bo Adamson, a Swedish scientist. The first passive-house residence was built in Darmstadt, Germany, in 1991. The first passive house in the United States was built in Urbana, Illinois, in 2003.

Located about a mile outside of downtown Vineyard Haven on the eastern shore of Lake Tashmoo, it was designed by Hutker Architects and built by Farley Pedler of Farley Built Inc. The view from the lot is stunning and its proximity to the water enviable, but its size and shape posed some design challenges. The lot is roughly sixty-

58 home & garden • spring–summer 2018

by e r i n r y e rson

THE PASSION FOR PASSIVE photo graphs b y d av id wel c h

spring–summer 2018 • home & garden 59

The great room’s large windows offer sweeping views of Lake Tashmoo.

five feet wide and more than nine hundred feet long, shaped like a shoe box. When the Hollands bought the property in 2011, the existing house was just a camp. It had no insulation and drafty windows, and was definitely not suited for four-season living.

Stephen and Vivian enjoyed the space as a summer cottage for four years, but knew they’d eventually like to live in their Vineyard home year round. Once the roof started to leak, they decided it was time.

Vivian had long been fascinated by passive homes, and as soon as they made the decision to tear down the original structure and build their dream house from scratch, she knew that they would build passive. While there are at least two other passive homes on Martha’s Vineyard, this would be Hutker Architects’ first. And they were enthusiastically on board. “It’s a 60 home & garden • spring–summer 2018

building theory we studied in school but we’d never worked on one,” said project manager Sean Dougherty. And Pedler, who built his own certified passive home in West Tisbury in 2013, was an obvious choice to build it.

Today, a narrow walkway from the parking area leads to the entryway. An open floor plan encompasses the kitchen, dining area, and living room, so that no matter where you stand in the great room, focus is pulled toward the large window that offers a sweeping westerly view of Lake Tashmoo. Also on the first floor is a pantry, laundry room, family room, one bedroom, and a full bathroom. The family room was designed to someday become a master bedroom to allow the Hollands to age in place. Upstairs, a flexible common space can be a guest room or office with an en suite bathroom. Beyond that is the exquisitely simple master

A bunk room, evocative of old Vineyard camps, is given a bright, modern upgrade.

suite with dramatic views of the lake. A denitrifying septic system was installed to protect, or at least not damage, the lake that the Hollands enjoy so much.

Mike Duclos, of DEAP Energy Group in Newton, was the energy consultant on the Hollands’ house. In the beginning, when the home existed only on paper, it fell on him to tell the Hollands and their team that their designs included too many windows to meet the energy objectives. The Hollands had originally wanted a larger, grander front door, but it was in the wrong spot for so much glass. They also might have liked another skylight, but were convinced to do without. “We don’t miss any of the windows we had to get rid of,” said Vivian. “We’re so happy with the light we get.”

Under the watchful eye of Pedler and Dougherty and one

of Hutker’s principal architects, Greg Ehrman, the Hollands’ house came to fruition as a living, breathing structure last year.

Literally – the home breathes. Through a complicated web of ducts connected to an energy recovery ventilation (ERV) system, the home takes in fresh air constantly and expels stale dirty air.

Sounds logical, but that dirty air contains valuable heat that the fresh air intake lacks. The ERV is able to extract the heat from the exhaust air and transfer it to the clean air without mixing any of the dirty particles. To maintain a steady temperature, the amount of air coming in and going out must remain equal. All that work and the system is completely silent.

A single air-source heat pump supplies the house with heating and air conditioning when Mother Nature needs a boost via two ducted distribution systems. Ehrman explained, “A heat spring–summer 2018 • home & garden 61

pump is a device that converts the latent energy in the outside air, via an electrically powered pump and compressor, to warm air and cool air inside the house. For every one unit of energy spent [running it] you get three to four units back inside the house. It is a super-efficient system.”

Passive homes typically can’t contain any sources of combustion, including heating systems. Instead, “the holistic approach to building allows the mechanical systems to be much smaller than a typical home, because the temperature swings and required energy loads are diminished due to a very tight and high insulated envelope, high performance windows and doors, no thermal bridging, etc.,” explained Dougherty.

The importance that the passive house standard puts on ventilation is unique. Typically air flow is not something that architects, designers, and builders spend a lot of time on, but the constant flow of fresh air offers some marked benefits.

Allergens and mold are lessened when fresh air circulates in an air-tight space. “In a typical home, when you go to bed, you likely close the bedroom door. All night stale air circulates with no way out,” Duclos explained. And when you sleep in a space where fresh air circulates constantly, you might wake up feeling clear-headed and truly refreshed. Pedler said that the level of comfort his passive home provides has a downside: “It makes you not ever want to be anywhere else,” he joked.

All that moving air also helps to usher out smells – whether from the kitchen or the bathroom – before they have a chance to linger.

A home that functions like a robot does not come cheap.

Pedler estimates that passive homes are 10 to 15 percent costlier than traditional ones. But it’s hard to put a dollar value on some of the perks: pristine air quality, overall comfort, and the peace of mind you might reap knowing you’ve lightened the planet’s carbon load.

For help with interior aesthetics, the Hollands turned to Carol Friedman of Design Resource in Concord, who helped choose tiles, stone, and lighting, before shifting her focus to finishing details including furnishings, rugs, and color coordination. She described the Hollands as ideal clients who knew what they wanted and were gracious in conveying it. In her design work, she has seen an uptick in energy awareness and people wanting to minimize their footprint, but this was her first passive house and it left a lasting impression.

“I was excited to be a part of the team on this project. It’s a beautiful home and comfortable for a family retreat and possible full-time home in the future,” she said.

The Hollands love their quiet, cocoon-like home, but they’re also still getting to know it. It’s a little more hands-on than your typical house. “You have to push a button to activate the ERV system every time you go into the bathroom,” said Stephen. And because there is no gas in the home at all, they’ve had to learn to cook with an induction oven. In the next few years they’re hoping to get off the electrical grid entirely with the installation of more solar panels.

For the Hollands the motivation is simple. “We want to protect the pond. And be good neighbors,” said Stephen. u 62 home & garden • spring–summer 2018

That oven? It’s electric!

No sources of combustion are allowed in passive homes.

spring–summer 2018 • home & garden 63

The simple master suite has its own deck overlooking Lake Tashmoo.

64 home & garden • spring–summer 2018

spring–summer 2018 • home & garden 65