Engine Shutdown Allow the engine to run at low idle, in neutral, for a few minutes after operations are completed. In this way afterboiling is avoided at the same time as temperature equalization takes place. This is especially important when the engine has been run at high rpm or under heavy load.
Stop the Engine If a station is active and locked the engine(s) can only be started and stopped from that station.
IMPORTANT! Never disconnect the current with the main switches when the engine is running. The alternator and electronics could be damaged.
IMPORTANT! Make sure the starter key is in 0-position or removed before main switches are switched off. Otherwise the alternator and electronics could be damaged.
Stop with key 1 Disengage the reverse gear by putting the control lever in neutral. 2 Turn the key to stop position “S”. Keep the key turned until the engine stops. The key will automatically return to the “0” position when it is released and can then be removed. The starter key must be in the “0” position or removed before main switches are switched off.
Stopping with the stop button 1 Disengage the reverse gear by putting the control lever in neutral. 2 Push the stop button(s). Release the button(s) when the engine(s) has/have stopped.
36 Downloaded from www.Manualslib.com manuals search engine
7748887 04-2008
