Vetus diesel DT44, DTA44, DT66, DTA66, Operation manual - PDF DOWNLOAD

Page 36

Engine oil change

4 Maintenance

Every 500 operating hours.

Tip

Change the oil with a switched off engine at operation temperature. (Lube oil temperature approx. 80°C (176°F).)

Caution! Used oil must be collected in a container for proper disposal according to laws and regulations.

VD00017

16

Engine oil change

Change the engine oil every 500 hours of operation (together with engine oil filter replacement). If the engine runs less than 500 hours during the year the oil should be changed at least once a year. Run the engine for a few minutes before changing the oil; warm oil can be pumped out more easily.

34

VD00023

17 Draining the oil

18 Removing the oil filter

The pump for the oil sump is (normally) located at the heat exchanger side of the engine. As an option for twin engine installation, the pump may be located on the other side at one of the engines.

Unscrew the oil filter, with a commercially available tool, when all the oil has been pumped out. Catch any dripping oil.

Warning! Beware of burns from hot oil.


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.
Vetus diesel DT44, DTA44, DT66, DTA66, Operation manual - PDF DOWNLOAD by www.heydownloads.com - Issuu