Draining water from the water separator/fuel filter Battery, cables and cable

Draining of water from the water separator/fuel filter

Every 125 operating hours.

4 Maintenance

VD00027

9Empty fuel filter

Empty the separately installed water separator/fuel filter: • Open the drain plug at the lower side of the filter. • Drain the water and close the drain plug.

Waterseparator

The water separator is not within the scope of supply but installation is required!

VD00109

10Bleeding

The system doesn’t need to be bled after the water separator/fuel filter has been drained. The fuel system is self-bleeding. Operate the starter switch until the engine fires; release the starter switch if the engine does not fire within 20 seconds. Wait until the starter motor has stopped before making a new attempt to start the engine. Repeat the above if the engine cuts out after a short time.