Draining of water from the water separator/fuel filter
4 Maintenance
Every 125 operating hours.
VD00027
VD00109
9 Empty fuel filter
10 Bleeding
Empty the separately installed water separator/fuel filter: • Open the drain plug at the lower side of the filter. • Drain the water and close the drain plug.
The system doesn’t need to be bled after the water separator/fuel filter has been drained. The fuel system is self-bleeding. Operate the starter switch until the engine fires; release the starter switch if the engine does not fire within 20 seconds. Wait until the starter motor has stopped before making a new attempt to start the engine.
☞
Waterseparator
The water separator is not within the scope of supply but installation is required!
Repeat the above if the engine cuts out after a short time.
31
