Electrical System – 5000 Parameters

from Toyota Forklift 7PM18 7PM20 7PML20 Service Manual SN 723984 - PDF DOWNLOAD

by www.heydownloads.com

Control/computer equipment – 8700

•Select the programming command from Table 5:

Table 5: Programming command - expanded keypad ProgammingFunctionNotes

Press “1” +

Press “2” + B +

Press “3” + B +

Press “4” + B + F + NNNN +

Reset to factory settingsBlock 1 - 9 is deactivated. Original PIN codes reset as per Table 6::

PIN codes in the block can be used

PIN codes in the block cannot be used

B= Block no. 0 - 9

Programming a new PIN codeB= Block no. 0 - 9

F= Driver profile no. 0 - 9

NNNN = PIN code

•Switch off the truck by pressing on the keypad. The expanded keypad programming is now complete

Parameter #39 must be set with the value 5, 6, 7 or 8 for the new PIN codes to be valid.

Carry out a practical test by logging in using some of the new PIN codes. It is important to establish that the correct driver profile has been activated when a certain PIN code has been entered, especially if a specific driver profile has been set for a specific application/goods handling.

Table 6: shows the PIN codes available as standard in the program. These can be activated for use or changed according to the driver’s wishes.

One or more of these blocks can be activated.

A driver profile is activated, on normal login, by all PIN codes whose block no. is activated.

The truck program does not approve login using the PIN code “0000”. Service personnel should keep notes on activated blocks, changed PIN codes and specially-set driver profiles.

NOTE!

Resetting the expanded keypad does NOT affect the driver profile settings.