Control/computer equipment – 8700

Double-click on the LPT port to be changed, and select the Port Settings tab. Check the "Use any Interrupt assigned to the port" option and click on OK.

The software application is supplied on a CD or via a network. Start installation by running X:\SETUP.EXE, where X:\ is the drive on which the installation application can be found. Then follow the on-screen instructions.

18.12.3 Installation on a PC with Windows NT

The software application is supplied on a CD or via a network. Start installation by running X:\SETUP.EXE, where X:\ is the drive on which the installation application can be found. Then follow the on-screen instructions.

18.12.4 In case of communication problems with CAN

Make sure the computer settings for the printer port in the BIOS Setup are as follows:

Port address:0378

IRQ:7

Mode:Output only

For detailed information on how to change the Setup settings, refer to the User's Guide supplied with the computer.