Preventive maintenance – P2

I: Inspect, rectify and change if necessary. T: Tighten. C: Clean. L: Lubricate.

M: Control measurement, rectify if necessary

6100 Hydraulic system

6100.1Check hoses and connections for wearI

6100.2Check hoses for wear and damageI

6100.3Check the oil tank for cracks, leakage and damaged mountings

6100.4Check that the oil level is correctI

6100.5Change the oil and clean the filter

6600. Lift cylinder

6600.1Check for leakageI

6600.2Check the mountingsI

6680 Power Trak

6680.1Check if there is any damage or cracks on the PowerTrak spring

6680.2Grease in the contact pressure spring’s guides

1 = The connections are re-tightened for the first time after 80 h, and then every 1000 h/12 months.

2 = The attachment bolts are re-tightened after 80 h/ 1 month to 45 Nm.

3 = Check for leakage in conjunction with the first oil change.

4 = The oil is changed for the first time after 80 h/1 month, and then every 3000 h/36 months

5 = The oil is changed and the filter cleaned for the first time after 80 h/ 1 month, and then every 1000 h/12 months.

6 = If the truck goes into a refrigerated environment or other harsh environment, the point is addressed at more frequent intervals.

When points with higher hour intervals are carried out the points with lower hour intervals should also be carried out unless otherwise specified above.