Tigercat INSPECTION/REPLACEMENT OF CRANKCASE VENTILATION FILTER
2. Unscrew the three bolts (3) and remove the crankcase ventilation filter element (2). 3. Replace and install the new filter element (2) in its seat, apply LOCTITE 243 on the bolts (3) and tighten them to the torque indicated in the table below.
The crankcase ventilation filter is designed to collect and filter the lubricating oil vapours. To avoid injury and the risk of burning, shut off the engine and allow it to cool down before proceeding. 1
3
4. Fit the filter cover (1) and tighten the bolts (5) to the torque indicated in the table below. Ref.
2
No.
Description
(3) 3 Filter element bolts (5)
4 5
E00013
1. Remove the bolts (5) that fasten the cover (1) and remove the cover. 30
6
Filter cover bolts
Torque Pre-torque 3.7 lbf-ft (5 Nm) Final torque 11 lbf-ft (15 Nm) 5.2 ± 0.7 lbf-ft (7 ± 1 Nm)
