Tigercat OIL LEVEL CHECK
If the oil level is low
IMPORTANT! Checking the oil level should be done only with the engine stopped and at operating temperature.
• Remove the engine oil fill cap (1 or 3) and fill the engine with clean oil (see the Oil Viscosity Chart in the back on this manual). • Check the level on the dipstick periodically while filling, do not fill past the “MAX” fill line.
• Park the machine on level ground so that the engine is in the normal operating position.
• Start the engine and let run for 2 to 3 minutes then shut off the engine.
• Wait approximately 10 minutes after shutting off the engine to allow the oil to drain into the oil pan.
• Check the oil level on the dipstick.
• Remove the Oil Dipstick (2) and ensure that the oil level is between the “MIN” and “MAX” lines.
• Use only the recommended oil for your climate. See oil viscosity chart in this manual. • When topping up, don’t mix oils having different viscosities.
1 2
• Failure to follow these rules may void your warranty.
E00005
3
21
