Tigercat 875 Logger Service Manual – PDF DOWNLOAD

Page 19

Tigercat 875 Logger To operate: 1. Close the rear door 2. START the engine 3. Lower the pilot reset lever.

Safety 3. Never travel near co-workers or other pieces of equipment with attachment running. 4. Do not allow people or other pieces of equipment near the machine during operation. 5. Do not turn on attachment until machine is at the working site.   6. Use only prearranged and approved signalling practices.

WARNING

Do not open the escape hatch or the rear door to increase ventilation when operating the machine. Keep the rear door closed when driving or steering the machine to prevent accidental entry of branches and debris into the cab. Keep the rear door closed and use the lap and shoulder harness belts when driving or steering the machine to prevent being thrown from the operator's cab. LEVER IN "ACTIVE CONTROLS" POSITION

880-089

PILOT RESET LEVER

NOTE: If the pilot reset lever is in the lowered position the engine will not start. The pilot reset lever must be in the raised position to START the engine. Once the safety interlock system has been activated, the safety of both the operator and all persons outside the cab becomes the responsibility of the operator.

WARNING

Secure loose items in the cab. Prior to commencing work, check all equipment controls to ensure the machine responds correctly. Make sure that all safety screens and guards including the escape hatch are installed and properly secured. Always rest the attachment on the ground when operation is stopped, regardless if the engine is running or not. Operate the machine only from a seated position in the operator’s seat. Watch for ground hazards such as metal debris, wire fencing or rocks. When travelling position attachment and boom so as not to impair vision. If vision is limited by dust, smoke, fog, rain or snow, stop the machine until visibility is restored.

1. When the engine is running, do not allow anyone in areas of the machine where they may be crushed by moving components. 2. Maintain a safe operating distance between the machine and other personnel. Never operate the boom or attachment over the heads of bystanders.

1.11


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.
Tigercat 875 Logger Service Manual – PDF DOWNLOAD by www.heydownloads.com - Issuu