Tigercat 853E Feller Buncher
Safety
OPERATING SAFETY PRECAUTIONS continued
Start the engine according to the instructions in this manual.
Never use a liquid starting aid to start an engine with a pre-heat device.
Maintain a safe operating distance between the machine and other personnel. Never operate the boom or attachment over the heads of bystanders. Use only prearranged and approved signalling practices. Operate the machine only from a seated position in the operator’s seat.
Prior to commencing work, check all equipment controls to ensure that the machine responds correctly.
Do not carry passengers either in the cab or anywhere else on the machine.
Make sure that all safety screens including the skylight are installed and properly secured. Do not open/remove an escape hatch, skylight or the cab door to increase ventilation when operating the machine.
When working on slopes, travel straight up or down the slope to prevent roll-over. Before leaving operator's cab, lower the felling attachment onto the ground. If out of the operator's cab for an extended period shut the machine off. Never work alone. Regulary inform other crew members of your intentions, location and length of time to perform duties. When parking the machine; • Park on level ground only and engage the swing brake. • Do not park on a hillside or incline.
Keep the cab door closed when driving or steering the machine to prevent accidental entry of branches and debris into the cab. Always rest the felling attachment on the ground when not operating, regardless if the engine is running or shut off.
When the engine is running, DO NOT allow anyone in areas of the machine where they may be crushed by moving components. 1.5
• Lower felling attachment onto level ground. • Stop the engine and relieve any hydraulic pressure trapped in the system by operating a joystick valve several times.
• Turn the master disconnect switch off if the vehicle is to be parked for an extended period of time (Example - overnight).
