ELECTRICAL, GAUGES AND ALARMS

Tigercat 853E Feller Buncher Safety

GENERAL SAFETY PRECAUTIONS continued

Maintain a distance of 10 ft. (3m) between the machine or boom and any power line carrying up to 50,000 volts or less.

Powerlines carrying more than 50,000 volts require a safety distance of 10 ft. (3m) plus 1/2 inch (10mm) for each addition 1,000 volts above the 50,000 volt level. If State/Provincial, local or job site regulations require even greater safety distances than stated above, adhere strictly to these regulations for your own protection.

If the machine must be transported, make sure that it is adequately secured to the transporting vehicle. Even though the brakes are fully engaged, block the wheels to prevent movement during transport.

Comply with instructions in this manual and also your company’s regulations for the operation of this machine.

Read, understand and follow all general safety precautions specified by felling head manufacturer.

OPERATING SAFETY PRECAUTIONS

Shut off engine when refuelling - DO NOT refuel the engine while smoking or when near open flame or sparks.

During refuelling do not leave the filler nozzle unattended.

Avoid over filling and immediately clean up spilled fuel.

Before starting the engine, check to ensure that all doors, panels, and access covers are installed properly and secured.

Make sure that all of the controls are positioned as specified in the starting instructions in the operator's manual.

Check that no other personnel have moved into a hazardous area before starting the machine.

Sound the machine horn before starting the machine.

The operator’s seat is equipped with a seat belt. Use this belt at all times when operating the machine.