Model 9600/9700 Swing-Reach ® Lift Truck

Pinout Matrix

The pinout matrix table lists functions and normal voltages of terminals and harness connector pins. The matrix columns have the following meanings:

• Item #: sequential number to aid in reference.

• Connection: the actual wire numbers or component abbreviations on the electrical schematic.

• Function Description : brief definition of the voltage carried on the wire.

• Theory of Operation :

•A detailed description of the voltage carried on the wire. If the voltage is variable, it indicates the state of a related component that causes the voltage to vary.

•Identifies possible causes for lack of correct voltage.

Section 8.Theory of Operation

Pinout Matrix wrt TP4.

• Normal Level : the approximate voltage that you should see on that wire for the state indicated. Unless otherwise indicated, voltages are measured with respect to (wrt) B– at TP4.

• Voltage Source: the device or connection that supplies the signal directly to the wire.

• Voltage User : the device or connection that the wire directly delivers the signal to.

Data Bus used for USB type connection via FlashWare.

3JPC2-3D–Negative Data Bus used for USB type connection via FlashWare.

4JPC4-1+5V_POT+5V for the Traverse Pot (VR4). This voltage is generated by a power supply on the CM. It is also jumpered in the Control Handle harness to supply the Rotate Pot (VR3).

5JPC4-2DGNDB– for the Lift Select switch (S6), Lift/Lower Inhibit Bypass switch (S7), Rotate Pot (VR3) and Traverse/Reach Pot (VR4).

Publication: 1089040, Issued: 08 Apr 2016

VR3, VR4