Flushing
with
@ While running tap water, move the control (shift) lever to “N” (NEUTRAL) and start the engine to remove salt water, dirt, etc. completely.
tap water
After operation in salt or muddy water, flush the outboard exterior and cooling system using tap water. @ Connect the furnished flushing plug to the WASH hole on the gear case, attach a rubber hose and flush the cooling system by running tap water through the hose. NOTE: Be ewe to plug the water strainer the gear case with tape in advance.
NOTE: Run the engine
at Idle during
flushing.
on
NOTE: Before using the propeller.
the flushing
plug,
remove
CAUTION: Before storing the outboard motor for en extended period of time, be sure to completely clean the outboard motor and flush the cooling system.
45
