Drag link installation (EP type

DRAG LINK INSTALLATION (EP TYPE) Improper installation of the drag link may damage the boat or hamper oper- ation of the controls. It is advisable that the drag link be installed by your authorized Nissan marine dealer. The following figure furnishes information on the installation of the drag link. The optional spacer may be required, depending on the steering cable used. @I Install the rod to the end of the cable, and tighten the nylon nut so that the rod can still rotate. @ Install the bolt, washer and collar on the steering bracket, as shown, and install the bolt from the lower side of the rod and secure with the upper cotter pin.

NOTE: Apply a coat of grease to the frlctlon- al parts and points during Inotallatlon.