Safety instructions Disconnect the negative cable first when removing the jumper cables. For instructions refer – see Battery on page 119. Travel precautions
Loader control lever should not be operated while traveling. Be sure to lock out the control lever during travel. IMPORTANT! Do not change selected travel mode (FAST/SLOW) while traveling. Travel with the bucket or attachment as low as possible [8”-12” (200 mm-300 mm)] to the ground. Never travel over obstacles or slopes that will cause the machine to tilt severely. Travel around any slope or obstacle that would cause a tilt greater than 10º.
Operate carefully on snow and ice and in very cold temperatures.
In cold weather, avoid sudden travel movements and stay away from even very slight slopes. The machine can slide sideways on icy slopes. Snow accumulation can hide potential hazards. Use care while operating and while using the machine to clear snow.
Parking the machine
When shutting down the machine for the day, plan ahead so that the machine will be on a firm, level surface away from traffic and away from high walls, cliff edges and any area of potential water accumulation or runoff. If parking on an incline is unavoidable, block the wheels to prevent movement. Lower the bucket to the ground. There should be no possibility of unintended or accidental machine movement. After the machine has been parked properly, shut down the engine and cycle all controls to release any remaining hydraulic system pressure. Be sure all switches and operating controls are in the OFF position and the right-hand console is raised, locking out the hydraulic functions.
Applications with lifting gear
Definition: Applications with lifting gear are used for raising, transporting and lowering loads with the help of load-securing devices (e.g., slings, chains). In doing so, the help of persons is necessary for securing and detaching the load. For example, get help from other people when lifting and lowering pipes, culverts or containers.
• The machine may only be used with lifting gear if the necessary safety devices are in place and functional.
• The load must be secured to prevent it from falling or slipping. • Persons guiding the load or securing it must stay in visual contact with the operator. • The operator must guide the load to the ground as soon as possible and avoid any oscillating or swinging movements.
• The machine may be moved with a raised load only if the path of the machine is as level as possible.
• Persons attaching or securing loads may only approach the boom from the side, after the operator has given permission. The operator may only give permission after the machine is at a standstill and the attachment no longer moves.
• Do NOT use any damaged or incorrectly dimensioned lifting attachments (slings, chains).
• Always wear protective gloves when working with lifting attachments.
Printed in U.S.A.
18
918134/CP0807
