Safety instructions

☞ Switch over the HP pressure relief valves A on the hydraulic pump. To do this:

• Loosen hexagon lock nuts B on both HP valves A.

• Screw in hexagon socket head screws C on both HP valves A until they are flush with lock nuts B .

• Secure hexagon socket head screws C on both HP valves A with lock nuts B.

☞ Release the parking brake.

☞ Run the engine at idling speed when towing the machine. Follow these procedures before taking the machine back into service:

☞ Change over the HP valves.

• Unscrew hexagon socket head screws C

• Secure them with lock nuts B

• The crane and lifting gear must have sufficient capacity

–see Specifications on page133.

• Crane handling requires lifting gear of four equal lengths.

• Secure the machine against unintentional movement.

WARNING!

Incorrect crane handling of the machine –Accident risk.

☞ Do not allow anyone to stay in the machine.

☞ The person giving the instructions to the crane operator must be within sight or sound of the crane operator.

☞ Make sure that the lifting capacities of the crane and the lifting gear (cables, chains) are sufficient.

☞ Only load the machine if the standard bucket is empty and in the transport position

–see Use: attachment on page9.

☞ Avoid suspended loads.

☞ Read the safety instructions

–see Safety instructions on page15.