1 minute read
Operation — Controls and Switches
No.ItemDescription
1 Steering knobUse to turn steering wheel.
2 Instrument panelContains warning indicators, operation indicators, and gauges.
3 Steering wheelTurn to control travel direction.
4 Accelerator pedalPress to control engine/travel speed.
5 Multi-purpose joystickUse to control lift arm/attachment maneuvering and loader drive direction.
6a Auxiliary hydraulics control lever
6a Auxiliary hydraulics control buttons
Use to activate auxiliary hydraulics control circuit. On early machines, the control lever is located next to the joystick.
Use to activate auxiliary hydraulics control circuit. On later machines, auxiliary hydraulics flow is controlled using buttons on the front of the joystick.
7 Parking brake leverUse to engage parking brake.
8 Operator’s seatAdjust operator’s seat position (page57).
9 Brake/inch pedalPress to control gradual travel and braking.
10 Steering column tiltUse to adjust steering column tilt (page58).
11 Hazard light switchPress to activate hazard lights.
12 Work light switchPress switch to ON position to activate work lights.
13 Rotating beacon switch (option)
14 Battery disconnect switch (option; standard EU only)
Press switch to ON position to activate rotating beacon.
Use switch to connect/disconnect the battery and electrical circuit.
On early machines, the battery disconnect switch is located on the operator’s platform under the seat.
On later machines, the battery disconnect switch is located inside the engine compartment.
15 Seat beltAlways fasten seat belt before operating loader.
16 Control leverControls road lights, directional indicators and horn.
17 Power-A-Tach® lock/unlock (option) Use to lock/unlock attachment.
18 Drive direction switchUse to control forward/reverse drive direction.
19 Seat plateSeat plate according to ISO 7096 (located on seat).
20 Hand throttle Controls engine speed independently from the accelerator pedal. Does not control travel speed.
21 Slow/fast speed toggle switch
22 Differential lock momentary or slow/fast selection switch
23 Auxiliary Electrical circuit momentary switch (option)
Toggles between slow/fast travel speed. Indicators 11 and14 illuminate to show selection.
On early machines, this switch is located on the top right of the joystick. On later machines, this switch is located on the top left of the joystick.
Engages differential lock when depressed. Indicator 5 illuminates when the differential lock is engaged.
On early machines, this switch is located on the front of the joystick.
On later machines, this switch is located on the top right of the joystick.
On early machines, this switch controls electrical power flow to wiring harness connection. Reserved for electrically powered attachments.
