SECTION 3. DISASSEMBLY, INSPECTION, AND REASSEMBLY 4.bolt(S) 6.Main clutch 7.Clutch disc 8.Clutch cover 9.Pin(B) 12.Input metal 13.Seal bolt 14.Nut 15.Washer spring 18.Metal sleeve 19.Seal bolt 20.O-ring 21.Sleeve 22.Clutch release bearing 23.Tension spring FIG. 4-3 Clutch assembly
1.MAIN CLUTCH 1-1.Disassembly Note: Generally it is impossible to separate diaphragm spring type clutch cover. It is principle to replace the clutch with assembly if pressure plate,diaphragm spring are needed to be replaced.
Note: When removing the bolts,loosen them gradually in diagonal sequence. Take care not to let oil get on the clutch facing. 1-2.Inspection of the clutch disc. Install the disc on the input gear and inspect the rotation play.If the measurement deviates from the specified value,Replace the disc.
1) DISASSEMBLY Separate the engine from the front transmission referring to the paragraph "SEPARATION OF MAJOR COMPONENT in chapter 2.“ 2) Remove the clutch assembly from the flywheel.
Fig 4-4 Clearance for spline.
4-3 Downloaded from www.Manualslib.com manuals search engine
