7.SEPARATION OF THE REAR TRANSMISSION AND CYLINDER CASE Parts which can be inspected during This operation - Control valve - Control linkage - Piston and lift crank linkage - PTO change gears. Inspection and service of the rear transmission should be performed following the instructions in the paragraph : 5 SEPARATION OF THE REAR TRANSMISSION AND SPACER TRANSMISSION
(10) Detach the delivery pipe from the cylinder case. (12) Remove the slow-return check valve along with the shaft. (13) Remove the 3-point lift link and related parts from the lift arm. (14) Remove the Cylinder case tightening bolts. (15) Detach the cylinder case assembly from the rear transmission
1)Removal (1) Remove the operator’s seat.
FIG.2-59 cylinder case
2) Installation Reassemble the reverse order of disassemble. (1) Tighten the cylinder case on the rear transmission case to the specified torque. FIG.2-58 operator’s seat (2) Remove the position lever (3) Remove the lever guide(RH) (4) When the tractor is equipped with an optional remote control valve,remove the remote control lever and related parts from the bracket. (5) Remove the back panel (6) Remove the tank cover (7) Remove the wiring for the rear combination lamps and trailer socket coupler. (8) Drain the fuel of fuel tank. (9) Remove the fuel tank and tank stay bracket .
Tightening torque
(2) After reassembly, make sure that the system functions properly.
2-18 Downloaded from www.Manualslib.com manuals search engine
5.4~6.87 Kgf.m (39.8~50.6lb.fts)
