Co-Pilot Operator ’ s Manual

Maintenance

The MAINTENANCE submenu screen accessed from the s t a t i o n a r y MAIN MENU 2 screen (see) T o view the screens the MAINTENANCE submenu, highlight with the stalk switch & Down button and then press the Enter ( ↵ button select the

The MAINTENANCE submenu screen contains the following main screens: Displays the maintenance schedule for various maintenance such engine oil and coolant Maintenance items are displayed the screen one a time shown Maintenance when enabled VCADS can reset after maintenance has been maintenance has not been resetting the maintenance item will

Maintenance Monitor

GuardDog™ (optional; must enabled)

GuardDog™, active maintenance monitoring system, uses sensor readings show the status routine maintenance requirements. the vehicle equipped with the GuardDog™ system, - Pilot will display GuardDog™ related maintenance items under the following conditions:

• When the vehicle started

• During driving individual maintenance items become due

• Manually through the GuardDog™ Status screen

After power - initiation and the MACK LOGO screen the - Pilot will display the ACQUIRING T A After activation this maintenance item due, the GUARDDOG™ MAINTENANCE ITEMS DUE screen will appear . However , more than one maintenance item requires the GUARDDOG™ MAINTENANCE interrupt screen (see) will appear . T o view the due maintenance select the GUARDDOG™ A TUS

The GUARDDOG™ A TUS screen will display a list GuardDog™ items and the corresponding condition will shown “check,” “OK.”

Note: The oil level indicator takes between and seconds provide data. the engine started within this time period with valid oil level the - Pilot will display the message, obtain the oil level Engine started too soon.”

Note: GuardDog™ not all GuardDog™ menu selections will unavailable.

W

ater-in-Fuel (WIF) [if equipped]

Allows the user send a command the EMS module. the W ater Fuel sensor detects liquid the water - separator bowl, the WIF indicator the instrument cluster will illuminate notify the driver .

DPF Inhibit Status

Indicates why the aftertreatment diesel particulate filter (DPF) regeneration was not T o view the DPF Inhibit Status list the MAINTENANCE highlight “DPF Inhibit with the stalk switch & Down button and the press the Enter ( ↵ ↵ ↵ ) button view

E

DPF Inhibit Status Scr een

DEL Messages

The DEL MESSAGES submenu screen accessed from the s t a t i o n a r y

MAIN MENU

2 screen (see). The DEL MESSAGES submenu contains a list driver event logging A driver may choose log a driver event logging message depending the driver ’ s activity . For the driver going leave a the driver would select the LEA TERMINAL

T o view the list driver event logging messages the DEL MESSAGES highlight with the stalk switch & Down button and then press the Enter ( ↵ ↵ ↵ ) button select the message

Note: The DEL MESSAGES submenu optional and will only appear enabled VCADS software MACKtraq.

The DEL MESSAGES submenu contains the following driver event logging messages:

• Leave T erminal

• Arrive T erminal

• Load Pick

• Load Delivery

• Leave Job Site

• Arrive Job Site

The SET submenu screen accessed from the s t a t i o n a r y

T o view the SET highlight with the stalk switch & Down button and then press the Enter ( ↵ ↵ ↵ ) button select the

The SET submenu screen contains the following main screens:

• Language Permits the user change language selections. The default setting English.

• Units Allows the user change the unit measure for and

• Driver Over Speed Alarm (if available and for future support) Allows the user designate a personal speed limit. this speed exceeded, alarm will sound and Overspeed warning interrupt screen will appear warn the driver .

• Date and T ime Permits the user set time and decide use a hour hour clock display and configure the way the date will display

• Display Light Allows the user modify the panel display thePilot.