5-101.bk Page 19 Friday, March 17, 2006 11:05 AM
200 BENCH PROCEDURES Make sure there is enough clearance between the end of the camshaft and the floor while removing the gears. Do not let camshaft fall or strike the floor when pressed from the gears. The camshaft can be bent easily, and the bend may go unnoticed. Installing a bent camshaft in the engine could result in cam bushing failure. 4. Remove the thrust washer.
Figure 5-18 — Camshaft Gear and Fuel Injection Pump Gear Removal
Page 5-19
