1 minute read
200 ENGINE DISASSEMBLY
[212 RB & RH] VIBRATION DAMPER AND CRANKSHAFT HUB
Refer to Figure 4-19.
1.Remove six mounting capscrews (4) and turnover bracket, if equipped.
2.Remove vibration damper (3) and fan belt drive pulley (1) together.
3.Using a 1-7/16 inch wrench, remove crankshaft hub capscrew (2).
4.Using a suitable puller such as J 24420-C, remove the crankshaft hub.
[261 CK] AIR COMPRESSOR
Refer to Figure 4-20.
Disconnect two coolant lines (1 and 4) from the air compressor head (2) at the fittings. Tag and cap lines.
The air compressor is heavy. Lifting the air compressor may require the help of an assistant or suitable lifting device. Attempting to lift the compressor without such assistance may result in severe personal injury.
