Control and operation
Operating manual
Access and equipment of the cab
1
Door handle
2
Latch
11 Door lock
Press the door lock 11 on the door handle 1 and open the door. If the door is to remain open during operations, swing the door back 180° and secure in the latch 2. Climb in with your face towards the machine and sit in the operator’s seat. Adjust the seat and steering column if necessary.
Getting out Caution! Entering or leaving the cab incorrectly could lead to injury. Proceed with the same attention on exit or entry of the cab, as while climbing the machine. Ensure that the safety lever is always in its highest position when entering or leaving the cab. Always use the handholds provided for the purpose when entering or leaving the machine. Face the machine when getting in or out and always use three-point support, i.e. two hands and one foot or two feet and one hand must always be in contact with the access system at the same time. Do not hold onto the controls to steady yourself. Never jump from the machine.
Fig. 3-38 3
Door - interior
Door handle on door lock
4
Lever for the latch
Switch off the machine and push the safety lever up. Push the door handle 3 on the lock down. Open the door fully and secure it in the latch 2. Climb out with your face towards the machine.
copyright by
3 - 48
MJFCIFSS
R 974 C / 10069856
