Control, operation

Working with the machine

3.4.7Joystick functions

Caution!

The machine is delivered as standard with normal control On request, the machine can be equipped with a control system that deviates from the norm (eg. with LIEBHERR control). The additional operating instructions for this control system apply in this case.

The joystick functions described here refer exclusively to normal control

Activate stanchion:

The stanchion cylinder is operated using the left joystick 4.

Fig. 3-50 Activate stanchion: Push the joystick back a Stanchion will be retracted. Push the joystick forwards b Stanchion will be extended.

Activate the adjustable boom: The boom is operated using the right joystick 3

Fig.

Activate the adjustable boom: Push the joystick back g. Equipment will be raised. Push the joystick forwards h Equipment will be lowered.

Activate grab:

The grab is operated using the right joystick 3

Danger!

The grab must never be guided by hand by auxiliary staff!

Push the joystick to the left e Grab will close.

Push the joystick to the right f Grab will open.

To tilt a work tool:

The tilt device 1 (option) is operated using the right joystick 3

Push the joystick to the left e. The working tool is curled in. Push the joystick to the right f The working tool is curled out.

Combining the movements:

Moving a joystick diagonally results in the work functions concerned being combined. This allows different equipment movements to be activated at the same time.