Control, operation

Cab roof

Pull out the sun visor and secure it in the retainers designed for this purpose. To retract the sun visor, remove it from the retainers and let it roll up slowly.

3.2.9Emergency exit – rear window

3-23 Emergency exit – rear window

By pulling the bracket 1 on the inside of the rear window, the rubber weather strip 2 can be released and removed

In case of an emergency, pull off the rubber weather strip 2 from the circumference of the window and push the window out.

3.2.10Interior illumination

Fig. 3-24 Interior illumination

The interior lighting is turned on with the slide regulator 1

Push the slide regulator to the right. Light 2 is turned on.

Push the slide regulator to the left. The spot light 3 is turned on.

Push the sliding regulator to the center position. The interior illumination is turned off.

3.2.11Fire extinguisher (option)*

*Operator regulations

3.2.12Windshield wiper

With the ignition turned on, press switch S14 on control panel C to activate the windshield wiper operation. This switch has two settings:

Push the switch in position 1 down (center position). Continuous operation is activated. Push the switch in position 2 down (final position). Intermittent control is activated.

3.2.12.2Window washer system

With the ignition turned on, press switch S11 on control panel C fo activate the windshield washer system.

Press the button down and hold. Water will be sprayed onto the front windshield through nozzles. The windshield wiper runs continuously. Release the button. The water flow stops. The windshield wiper continues to run continuously for approx. 3 seconds.