RUNNING-IN STANDARD AND PERFORMANCE TEST STANDARD: SAA4D95LE-7(D37EX-24,D37EXI-24,D37PX-24,D37PXI-24)

Remark

• This table shows the standard values obtained by using the JIS correction coefficients.

•Output and torque in this table show the values when the fan is not installed, and these values differ from specification values.

•This table shows the standard values when the air cleaner,the KDOC, and the SCR are installed not installed and no load is applied to the alternator.

•The loads for the dynamometer in this table shows the value when the dynamometer arm is 716 mm long.

•Use ultra low-sulfur diesel fuel.

•Use EO15W40-LA as running-in lubricating oil.

RUNNING-IN STANDARD AND PERFORMANCE TEST STANDARD:

RUNNING-IN STANDARD AND PERFORMANCE TEST STANDARD:

SAA4D95LE-7(D39EX-24,D39EXI-24,D39PX-24,D39PXI-24)

• This table shows the values when the fan is not installed.

•The loads for the dynamometer in this table shows the value when the dynamometer arm is 716 mm long. Performance test standard