SECTION 1 FRAME FIGURE 1-1. STEERING, DRIVE AND REAR AXLE INSTALLATIONS ITEM #
1 2
3 4
PART NUMBER
QTY.
0272371 0273227 0272372
Ref. Ref. Ref. Ref.
0440259 0701016 0701020 1380153
2 4
4 1
5 to 6 7 8 9 10 11
1684237 1684263 Not Used 3423037 4812000 4846757 0100011 1320318
4 4 2 A/R 2
12
1380158
2
13
2110404
2
0272710 0274224 0272711 0274225 0273008 0274226
Ref. Ref. Ref. Ref. Ref. Ref. Ref.
101 102
STEERING INSTALLATION 1930ES 2030ES/2630ES 2646ES/3246ES
REV. F C G
Bearing, Flanged Bolt M10 Options: 40mm Length 60mm Length E-Clip Steer Cylinder Assembly (See Section 5 for Breakdown): 1930ES/2030ES/2630ES 2646ES/3246ES Pin, Clevis Flatwasher M10 Lug, Steer Compound, Locking P-Clamp (Not Shown - Used with Steer Hoses) (USA Built Machines Prior to S/N 0200124799 & Belgium Built Machines Prior to S/N 1200002594) Clip (Not Shown - Used with Item 11) (USA Built Machines Prior to S/N 0200124799 & Belgium Built Machines Prior to S/N 1200002594) Fitting, Straight DRIVE INSTALLATION 1930ES 1930ES (UL SPEC) 2030ES/2630ES 2030ES/2630ES (UL SPEC) 2646ES/3246ES 2646ES/3246ES (UL SPEC)
L C L C L C
Not Used 2 No Longer Available - See Note
Use 2915236
3121246
DESCRIPTION
Wheel Drive Assembly Options: 1930ES USA Built Machines Prior to S/N 0200118041 & Belgium Built Machines Prior to S/N 1200001487 (was p/n 0272305) (See Figure 1-2 for Breakdown) NOTE: To replace the complete unit both right & left Drive Assemblies must be upgraded at the same time. Order qty 2 of p/n 2915236. USA Built Machines S/N 0200118041 to S/N 0200135154 & Belgium Built Machines S/N 1200001487 to S/N 1200004293 (See Figure 1-3 for Breakdown) (was p/n 3160306)
1930ES, 2030ES 2630ES, 2646ES & 3246ES
1-3
