SECTION 10 - SPECIAL OPTIONS

FIGURE 1-1. STEERING, DRIVE AND REAR AXLE INSTALLATIONS (CONTINUED)

ITEM # PART NUMBER QTY. DESCRIPTION REV.

102(cont’d)

2030ES/2630ES/2646ES/3246ES

No Longer USA Built Machines Prior to S/N 0200118041 & Belgium Available - See Built Machines Prior to S/N 1200001487 Note (was p/n 0272306) (See Figure 1-2 for Breakdown) NOTE: To replace the complete unit both right & left Drive Assemblies must be upgraded at the same time. Order qty 2 of p/n 1001100975. Use 1001100975 USA Built Machines S/N 0200118041 to S/N 0200135154 & Belgium Built Machines S/N 1200001487 to S/N 1200004293 (See Figure 1-3 for Breakdown) (was p/n 3160307) 102A 3577112 2 Plate, Spacer (Used only on Machines with Kit p/n 2915236 installed) 103 4 Wheel & Bolt Kit Options (includes Item 104):

Note: Must replace Tire & Wheel Assemblies in pairs per axle.

2915012 1930ES (was p/n 0272699, 2915005, 4520277, 4520326 & 4520565) 2915013 2030ES/2630ES/2646ES/3246ES (was p/n 2915006, 4520278, 4520327 & 4520676) 104 20 Bolt, Wheel Options: 0630579 36mm Length 0630580 22mm Length 105 to 107 Not Used 108 2780266 2 Hub Assembly (See Items 201-208 for Breakdown) 109 to 111 Not Used 112 3760463 2 Ring, Retaining 113 Not Used 114 4740523 4 Washer, Spindle Retaining 115 4740524 2 Thrustwasher M60

2780266 Ref. HUB ASSEMBLY

Note: Qtys shown for 1 Assembly. Two Assemblies required per machine.

201 7012524 1 Cap, Dust 202 7010641 1 Nut, Slotted 203 7010642 1 Pin, Cotter 2” x 3/16” 204 7019697 1 Washer 205 7026185 1 Bearing, Cone - Outer 206 Not Available 1 Hub (Purchase Complete Hub p/n 2780266) 207 7026183 1 Bearing, Cone - Inner 208 7026184 1 Seal

Ref. FRAME WELDMENTS 301 A/R Bushing Options: 0440264 2 1930ES 0440265 4 2030ES/2630ES/2646ES/3246ES 302 3128601 A/R Kingpin Rework Instruction (Provides rework procedure for damaged kingpins) B