SECTION 1 FRAME FIGURE 1-1. STEERING, DRIVE AND REAR AXLE INSTALLATIONS (CONTINUED) ITEM #
PART NUMBER
QTY.
102(cont’d) No Longer Available - See Note
Use 1001100975
102A
3577112
103
2 4
2915012 2915013 104
105 to 107 108 109 to 111 112 113 114 115
201 202 203 204 205 206 207 208
20 0630579 0630580 Not Used 2780266 Not Used 3760463 Not Used 4740523 4740524
302
1-4
Hub Assembly (See Items 201-208 for Breakdown)
2
Ring, Retaining
4 2
Washer, Spindle Retaining Thrustwasher M60
Ref.
7012524 7010641 7010642 7019697 7026185 Not Available 7026183 7026184
1 1 1 1 1 1 1 1
0440264 0440265 3128601
Ref. A/R 2 4 A/R
REV.
2030ES/2630ES/2646ES/3246ES USA Built Machines Prior to S/N 0200118041 & Belgium Built Machines Prior to S/N 1200001487 (was p/n 0272306) (See Figure 1-2 for Breakdown) NOTE: To replace the complete unit both right & left Drive Assemblies must be upgraded at the same time. Order qty 2 of p/n 1001100975. USA Built Machines S/N 0200118041 to S/N 0200135154 & Belgium Built Machines S/N 1200001487 to S/N 1200004293 (See Figure 1-3 for Breakdown) (was p/n 3160307) Plate, Spacer (Used only on Machines with Kit p/n 2915236 installed) Wheel & Bolt Kit Options (includes Item 104): Note: Must replace Tire & Wheel Assemblies in pairs per axle. 1930ES (was p/n 0272699, 2915005, 4520277, 4520326 & 4520565) 2030ES/2630ES/2646ES/3246ES (was p/n 2915006, 4520278, 4520327 & 4520676) Bolt, Wheel Options: 36mm Length 22mm Length
2
2780266
301
DESCRIPTION
HUB ASSEMBLY Note: Qtys shown for 1 Assembly. Two Assemblies required per machine.
B
Cap, Dust Nut, Slotted Pin, Cotter 2” x 3/16” Washer Bearing, Cone - Outer Hub (Purchase Complete Hub p/n 2780266) Bearing, Cone - Inner Seal FRAME WELDMENTS Bushing Options: 1930ES 2030ES/2630ES/2646ES/3246ES Kingpin Rework Instruction (Provides rework procedure for damaged kingpins)
1930ES, 2030ES 2630ES, 2646ES & 3246ES
3121246
