SFH220 & SFH240 FRONT MOWER SERVICE MANUAL <Remove of the gear case (RH) ASSY> 1. Remove the blades. 2. Remove the spring pin of the universal joint. 3. Remove the universal joint. 4. Remove the shaft cover. 5. Shift the snap ring both LH and RH (40) to inside, and shift the coupling (39) to remove the joint shaft. coupling shaft cover
universal joint
Right side
joint shaft
Right side
<Disassemble of the gear case (RH) ASSY> 6. Remove the 4 piaces of nut (22) and 4 piaces of SW (21), take off the gear case from the mower deck. 7. Remove the level plug and oil filter plug (2) and drain oil. 8. Remove the oil seal (9) and remove the snap ring (8). 9. Fix the spline of the shaft (5) by a vise with copper plate, pull out the shaft from the gear case. 10. Remove the bearing (7), from the shaft (5). 11. Loosen the 4 piaces of bolts (20), take off blade metal (10). 12. Take out the bevel gear (3). 13. Remove the bevel gear (4) from the shaft (11). 14. Remove the snap ring (13). 15. Remove the oil seal (16), remove the snap ring (15). 16. Take out the shaft (11) with hitting it. 17. Remove the bearings (12, 14) from the shaft (11) and blade metal (10).
50
